Re: [Openlte-discuss] srsUE with OpenLTE

[Ben W. <bwo...@gm...>]

Hi Siddarth,

I have not tried srsUE with openLTE, so I'll need you to do some more
testing for me.  From the openLTE log and the UE PCAP that you sent, it
looks like openLTE isn't properly handling multiple PDCP messages being
sent in one PDU.  I'll see what I can do to fix this in an upcoming release.

Thanks,
Ben

On Fri, Oct 7, 2016 at 1:42 PM, Siddarth Mathur <mat...@gm...>
wrote:

> Hello everyone,
>
> I am trying to connect the srsUE with the OpenLTE eNB. The problem I have
> is that the UE completes the Random Access Procedure but then just sends
> control messages after that. The tunnel interface is not created either.
>
> At the eNB, it authenticates the UE successfully and then nothing after
> that. Has anyone else encountered this issue? Or has anybody had a stable
> setup with srsUE and openLTE?
>
>
> UE:
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> *Setting frequency: DL=1822.5 Mhz, UL=1727.5 MHzSearching for cell...Found
> CELL ID: 0 CP: Normal  , CFO: 0.1 KHz.Trying to decode MIB... - Cell
> ID:         0 - Nof ports:       1 - CP:              Normal   -
> PRB:             25 - PHICH Length:    Normal - PHICH Resources: 1 -
> SFN:             0MIB received BW=5 MHzInitializating cell
> configuration...Setting Sampling frequency 5.76 MHzSIB1 received,
> CellID=1,  PLMN Id: MCC 101 MNC 1SIB2 receivedRandom Access Transmission:
> seq=1, ra-rnti=2RRC ConnectedRandom Access Complete.     c-rnti=61,
> ta=26Random Access Transmission: seq=1, ra-rnti=2Random Access
> Complete.     c-rnti=61, ta=26Random Access Transmission: seq=1,
> ra-rnti=2Random Access Complete.     c-rnti=61, ta=26Random Access
> Transmission: seq=1, ra-rnti=2Random Access Complete.     c-rnti=61, ta=26*
>
> Attaching the logs, configuration files and the wireshark captures for the
> eNB and UE. It would be great if someone could help me out. I am not sure
> what is going wrong here.
>
>
> Thank you.
>
> --
> Regards,
> Siddarth Mathur
>
> ------------------------------------------------------------
> ------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, SlashDot.org! http://sdm.link/slashdot
> _______________________________________________
> Openlte-discuss mailing list
> Ope...@li...
> https://lists.sourceforge.net/lists/listinfo/openlte-discuss
>
>