[Openlte-discuss] Data connection is not working
An open source 3GPP LTE implementation.
Status: Alpha
Brought to you by:
bwojtowi
From: Akib S. <aki...@gm...> - 2016-11-24 18:45:31
|
Dear List I am using enodeb app. phone does connect to network hosted. but when i try to send and receive pings or any data transfer it doesnt work. Please help me in same. here is my config for openlte ***System Configuration Parameters*** Read parameters using read <param> format Set parameters using write <param> <value> format Commands: start - Constructs the system information and starts the eNB stop - Stops the eNB shutdown - Stops the eNB and exits construct_si - Constructs the new system information help - Prints this screen add_user imsi=<imsi> imei=<imei> k=<k> - Adds a user to the HSS (<imsi> and <imei> are 15 decimal digits, and <k> is 32 hex digits) del_user imsi=<imsi> - Deletes a user from the HSS print_users - Prints all the users in the HSS print_registered_users - Prints all the users currently registered Radio Parameters: available_radios: (read-only) 0: no_rf 1: bladerf-4e2ad4818e4ef2572c78c62da246b00a selected_radio_name (read-only) = bladerf-4e2ad4818e4ef2572c78c62da246b00a selected_radio_idx = 1 clock_source = internal System Parameters: band = 3 bandwidth = 5 cell_id = 1 debug_level = radio phy mac rlc pdcp rrc mme gw user rb timer iface msgq debug_type = error warning info debug dl_center_freq = 1822500000 dl_earfcn = 1375 dns_addr = 08080808 enable_pcap = 1 ip_addr_start = 0A000001 mcc = 901 mnc = 70 n_ant = 1 n_id_cell = 0 p0_nominal_pucch = -96 p0_nominal_pusch = -70 q_hyst = 0 q_rx_lev_min = -140 rx_gain = 30 search_win_size = 0 sib3_present = 0 sib4_present = 0 sib5_present = 0 sib6_present = 0 sib7_present = 0 sib8_present = 0 tracking_area_code = 1 tx_gain = 86 ul_center_freq = 1727500000 ul_earfcn = 19375 use_cnfg_file = 1 use_user_file = 1 -- Akib Sayyed Matrix-Shell aki...@gm... aki...@ma... Mob:- +91-966-514-2243 |