From: SourceForge.net <no...@so...> - 2013-05-29 15:11:13
|
Bugs item #3580161, was opened at 2012-10-25 09:46 Message generated for change (Settings changed) made by arcress You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=532251&aid=3580161&group_id=71730 Please note that this message will contain a full copy of the comment thread, including the initial issue submission, for this request, not just the latest update. Category: IPMI Direct plugin Group: 3.2.x >Status: Closed Resolution: Fixed Priority: 5 Private: No Submitted By: Andy Cress (arcress) Assigned to: Andy Cress (arcress) Summary: Several sensor bugs with Intel baseboards Initial Comment: In further testing with openhpi-3.2.0 and the ipmidirect plugin, these sensor bugs were noticed: 1) For Intel ME-based sensors, the GetSensorReading returns an error because it attempts to use the wrong slave address. (e.g. MTT, NM Capabilities) 2) For any sensors, it fails to detect if the IPMI sensor is in Init state, meaning that the reading is invalid. 3) For Intel Romley baseboards, they should be included in the IntelRms registration list 4) For some ME sensors (e.g. MTT) it sometimes can take longer than 1 second, and the reading returns with c3 (timeout). ---------------------------------------------------------------------- Comment By: Andy Cress (arcress) Date: 2012-10-25 13:25 Message: committed to the trunk with revision 7520. ---------------------------------------------------------------------- Comment By: Lars Wetzel (larswetzel) Date: 2012-10-25 12:12 Message: Hi Andy commit it. Regards Lars ---------------------------------------------------------------------- Comment By: Andy Cress (arcress) Date: 2012-10-25 09:52 Message: Lars, Please review this patch. The implementation is targeted to the specific problems and should not affect other systems adversely. Andy ---------------------------------------------------------------------- Comment By: Andy Cress (arcress) Date: 2012-10-25 09:48 Message: One more: 5) The FindSensor/FindRdr logic needs to handle different slave addresses, as in case 1 above. ---------------------------------------------------------------------- Comment By: Andy Cress (arcress) Date: 2012-10-25 09:47 Message: Attached is a patch for these issues for review (oh_sensorbugs.patch). ---------------------------------------------------------------------- You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=532251&aid=3580161&group_id=71730 |