From: Raghavendra G <rag...@gm...> - 2007-03-13 05:26:59
|
Sorry for the trouble.. A silly mistake :) Second Checksum is 0x7d not 0x1d On 3/13/07, Raghavendra G <rag...@gm...> wrote: > > Hi, > > Here is the command I am using, > root@localhost:/root> ipmitool -t0x20 -v -v -v -m0x7a raw 0x6 0x34 0x40 > 0x20 0xb0 0x30 0x82 0 1 0 0x1d > Set my IPMB address to 0x7a > 40 20 b0 30 82 00 01 00 1d > RAW REQ (netfn=3D0x6 cmd=3D0x34 data_len=3D9) > send_cmd (9 bytes) > 40 20 b0 30 82 00 01 00 1d > Sending request to IPMB target @ 0x20 > Error:cc sending RAW command > > (I am trying to send GetAddressInfo Command to Shelfmanager from an AMC > card with IPMB-L address 0x7a on a carrier card with IPMB-0 Address 0x82)= . > > Observing the return code 0xcc (Invalid data field), its confirmed that > Carrier IPMC supports bridging. But not able to find out whats wrong with > Data bytes I am sending. > > regards, > Raghavendra. > > > On 3/12/07, Pierre Sangouard <psa...@es...> wrote: > > > AMC.0 R2.0 mandates that Carrier IPMC supports bridging from IPMB-L to > > IPMB0 =96 see section 3.13 and particularly: "REQ 3.198 Carrier IPMCs > > shall bridge a "Send Message" command that targets IPMI messaging Chann= el 0 > > to IPMB-0. The intent is to allow an MMC to send a message to the Shelf > > Manager.". > > > > > > > > Pierre > > > > > > ------------------------------ > > > > *From:* ope...@li... [mailto: > > ope...@li...] * On Behalf Of * > > nit...@wi... > > *Sent:* Monday, March 12, 2007 2:59 PM > > *To:* ope...@li... > > *Subject:* Re: [Openhpi-devel] ATCA: Query related to Bridging of > > IpmiCommandsfrom IPMB-L to IPMB-0 > > > > > > > > Carrier IPMCs have to provide bridging functionality as per AMC > > specifications. > > > > But you seem to be using bridging in "reverse direction" so to say. > > > > > > > > Typically bridging works in forward direction when Shelf Manager sends = a > > command to MMC via carrier IPMC and MMC responds back. > > > > In that case, carrier IPMC handles the bridging function and MMC is > > unaware of this. > > > > > > > > As such, support for send message (bridging) command is optional in MMC > > and that's why you might be facing problems. > > > > Which MMC implementation are you using? > > > > > > > > Regards, > > > > - Nitin > > > > Wipro Technologies > > > > > > ------------------------------ > > > > *From:* ope...@li... [mailto: > > ope...@li...] * On Behalf Of *Raghavendr= a > > G > > *Sent:* Saturday, March 10, 2007 11:58 AM > > *To:* ope...@li... > > *Subject:* Re: [Openhpi-devel] ATCA: Query related to Bridging of > > IpmiCommands from IPMB-L to IPMB-0 > > > > > > > > Sorry forgot a bit of information, > > > > Here is the Command I am sending, > > GetAddress Info to the Shelf Manager > > root@localhost:/root> ipmitool -t0x20 -m 0x7a raw 0x6 0x34 0x40 0x20 > > 0xb0 0x30 0x82 0 0x1 0 0x9d > > Error:cc sending RAW command > > > > On 3/10/07, *Raghavendra G* < rag...@gm...> wrote: > > > > Hi all, > > > > Is it possible to bridge Ipmi Commands from IPMB-L to IPMB-0. Basically > > I am sending IPMI commands from AMC on a carrier blade to the Shelf Man= ager. > > I am trying something similar to below, > > > > ipmitool -t 0x20 -m 0x7a raw <Send Message Command to Shelf Manager> > > where, > > 0x7a: AMC Address on IPMB-L > > -t 0x20: IPMC of Carrier blade > > > > I am hoping the IPMI commands traverse following path, > > System Interface on AMC -> IPMC present on Carrier Card, IPMB-L -> Shel= f > > Manager, IPMB-0 > > > > Does the IPMCs on Carrier blade have bridging Capability? From IPMI v1.= 5spec it seems that only BMC (Shelf Manager) has the bridging capability. > > > > If it is possible to bridge commands from IPMB-L to IPMB-0, please poin= t > > me to the details of parameters to Send Message Command. > > -- > > Raghavendra G > > OpenClovis Solutions, Bangalore > > +91 9880213025 > > > > > > > > > > -- > > Raghavendra G > > OpenClovis Solutions, Bangalore > > +91 9880213025 > > > > > > -----------------------------------------------------------------------= -- > > Take Surveys. Earn Cash. Influence the Future of IT > > Join SourceForge.net's Techsay panel and you'll get the chance to share > > your > > opinions on IT & business topics through brief surveys-and earn cash > > > > http://www.techsay.com/default.php?page=3Djoin.php&p=3Dsourceforge&CID= =3DDEVDEV > > _______________________________________________ > > Openhpi-devel mailing list > > Ope...@li... > > https://lists.sourceforge.net/lists/listinfo/openhpi-devel > > > > > > > -- > Raghavendra G > OpenClovis Solutions, Bangalore > +91 9880213025 > --=20 Raghavendra G OpenClovis Solutions, Bangalore +91 9880213025 |