I come to a similar result. Unfortunately, I have not found a marker, when to remove how many bytes. With the current knowledge, these are broken DTA files for me.
Heatpump software V3.89.5-11451 now has dta version 0x2b23. Any plans to add support?
please close this issue as invalid
nevermind. It still works. Guess the problem was that for a period of two days old and new format was in the same file? anyways. Thank you for all the work you put into openDTA and dtaGUI. Its an invaluable tool for any technically interested AIT heatpump user.
Heatpump software V3.89.5-11451 now has dta version 0x2b23. Any plans to add support?
what i see, the first datapoint has only data but no date. If i delete the first 30 bytes (see screenshot), then dta is shown with good dates. I checked different files, sometimes i have to delete 60 bytes, before the first full datapoint of 70 bytes comes.
what i see, the first datapoint has only data but no date. If i delete the first 30 bytes (see screenshot), then dta is shown with good dates.
hello opendta, i have the same issue since a few months. Suddenly the dta files show the date of 1970, each time i download the files with a usb drive. Attached is one dta file. Are you able to open that one? Im using version 2.0 with Windows, luxtronik V1.88.3-9717. I noticed something: if i download the data from: http://ip-address/proclog they are fine but from http://ip-address/NewProc they show 1970. So something must have changed in the data format. I'll add the dta files here.
These are the last good dataset (31.03) and the first bad dataset (02.04). I changed the IP to get remote access. And also one is wintertime, the other one summertime.
These are the last good dataset (31.03) and the first bad dataset (02.04). I changed the IPs to get remote access. And also one is wintertime, the other one summertime.
Update. I see that until the 31.3.2024 the data is good, and the next one (i have) from 02.4.2024 is bad. Could it be thats because of summer/winter time?
Update. I see that until the 31.3.2024 the data is good, and the next one (i have) from 02.4.2024 is bad. Could it be thats because of summer/winter time?
hello opendta, i have the same issue since a few months. Suddenly the dta files show the date of 1970, each time i download the files with a usb drive. Attached is one dta file. Are you able to open that one? Im using version 2.0 with Windows, luxtronik V1.88.3-9717. I noticed something: if i download the data from: http://ip-address/proclog they are fine but from http://ip-address/NewProc they show 1970. So something must have changed in the data format. I'll add the dta files here.
hello opendta, i have the same issue since a few months. Suddenly the dta files show the date of 1970, each time i download the files with a usb drive. Attached is one dta file. Are you able to open that one? Im using version 2.0 with Windows, luxtronik V1.88.3-9717. I noticed something: if i download the data from: http://ip-address/proclog they are fine but from http://ip-address/NewProc they show 1970. So something must have changed in the data format. I'll add the dta files here.
hello opendta, i have the same issue since a few months. Suddenly the dta files show the date of 1970, each time i download the files with a usb drive. Attached is one dta file. Are you able to open that one? Im using version 2.0 with Windows, luxtronik V1.88.3-9717. I noticed something: if i download the data from: http://192.168.178.133/proclog they are fine but from http://192.168.178.133/NewProc they show 1970. So something must have changed in the data format. I'll add the dta files here.
hello opendta, i have the same issue since a few months. Suddenly the dta files show the date of 1970, each time i download the files with a usb drive. Attached is one dta file. Are you able to open that one? Im using version 2.0 with Windows, luxtronik V1.88.3-9717.
hello opendta, i have the same issue since a few months. Suddenly the dta files show the date of 1970, each time i download the files (no firmware update on the luxtronik was made). Attached is one dta file. Are you able to open that one? Im using version 2.0 with Windows, luxtronik V1.88.3-9717.
hello opendta, i have the same issue since a few months. Suddenly the dta files show the date of 1970, each time i download the files (no firmware update on the luxtronic was made). Attached is one dta file. Are you able to open that one? Im using version 2.0 with Windows, luxtronik V1.88.3-9717.
hello opendta, i have the same issue since a few months. Suddenly the dta files show the date of 1970, each time i download the files (no firmware update on the luxtronic was made). Attached is one dta file. Are you able to open that one?
The 1st dateset in the attached DTA file is malformed. Thus, everything else is read wrong. Also the number of datasets the file contains is not equivalent to the number in the header. If this problem still persists, please provide another DTA file.
I can confirm that I see the same problem with the attached DTA file. Debugging could take a while.
Dta recording starts 1970 / File Format issue
Datafile: Anpassung Pth Berechnung
macdeploy Script
Merge branch 'develop' of ssh://diskstation:/volume1/git/repos/opendta_src into develop
dta2csv: Tausendertrennzeichen ausgeschaltet
i don't find any useful translation for the value. I think even if there is an translation formula, it doesn't realy make sence to build it in opendata. I'm afraid it's much to specific rated to my local Alpha Innotec LWC60. edit: Is the value in opendta for AIN3 correct scaled? now at warmwater generation I have 2200l/min and 1.46V in the webinterface. Maybe the scale for opendta is 1:10? Then 5V could be max
i don't find any useful translation for the value. I think even if there is an translation formula, it doesn't realy make sence to build it in opendata. I'm afraid it's much to specific rated to my local Alpha Innotec LWC60.
AIN3 could match to some flow values. However, I do not know, how to calculate the flow from the analog input. Do you know, what kind of flow sensor your heatpump is using? So far, I have only seen a Grundfoss VFS 5-100 and this sensor provides input signal between 0 and 5V. (Which is actually not the case here.)
At least I know that the pump is controlled by AO4. At the website of the LWC I can't find an AIn1 anywhere. AIN3 could be the flowrate, it's looking pretty similiar. 7.1 equals around 730l/min 7.5 equals around 790l/min 14.6 equals around 2200l/min I compared AIN3 from DtaGui to logged values in fhem (captured from lwc website)
I don't know if it's stored in the dta. Do you have any idea how I can check that? At least I know that the pump is controlled by AO4. At the website of the LWC I can't find an AIn1 anywhere. AIN3 could be the flowrate 7.1 equals around 730l/min 7.5 equals around 790l/min 14.6 equals around 2200l/min I compared AIN3 from DtaGui to logged values in fhem (captured from lwc website)
Confirmed to work again. Many thanks!! :-)
Unfortunately, I can not find a field in your DTA file which could represent the flow. Maybe it is not stored in DTA? Do you see, at which port the flow sensor is connected to the controller? Usually it is AIn1.
opendta-v0.20-macos does not start/open
A v0.20a macOS download is now available. Hopefully it is working now.
thank's for taking a look at it. It has an flow sensor. On the website of the LWC i get values for the flowrate. The id of the flowrate is 0x0x230d20 in the website source.
I cannot find a field in you DTA file which would represent a flow value. Some DTAs have a direct flow field. Others have AIn / AnalogIn / AIn1 to calculate the flow from. Does your heat pump has a flow sensor?
not the one from the screenshot (downloaded it a few minutes ago)
Thanks for your response and help! Here comes the output: testuser@iMac ~ % /Applications/opendta/dtagui.app/Contents/MacOS/dtagui dyld[46897]: Library not loaded: @rpath/QtDBus.framework/Versions/A/QtDBus Referenced from: /Applications/opendta/dtagui.app/Contents/Frameworks/QtGui.framework/Versions/A/QtGui Reason: tried: '/Applications/opendta/dtagui.app/Contents/Frameworks/QtGui.framework/Versions/A/../../../QtDBus.framework/Versions/A/QtDBus' (no such file), '/Applications/opendta/dtagui.app/Contents/Frameworks/QtWidgets.framework/Versions/A/../../../QtDBus.framework/Versions/A/QtDBus'...
Can you please attach the DTA file (or send it via email to me).
Can you please attache the DTA file (or send it via email to me).
Can please try to start the app from command line: open terminal type: /path-where-dtaguiapp-is-located/dtagui.app/Contents/MacOS/dtagui typically: /Applications/dtagui.app/Contents/MacOS/dtagui Please copy the text output here.
Same here today. Updated to version 0.20 (from 0.18) but it does not start at all. You click to start but no reaction at all. Monterey 12.1 Had to go back to 0.18.
Same here today. Updated to version 0.20 (from 0.18) but it does not start at all. You click to start but reaction at all. Monterey 12.1 Had to go back to 0.18.
csv is created by the dtagui .2
DF [l/min] is 0, also E1 [kWh] and AZ1 []
opendta-v0.20-macos does not start/open
Anpassung an Qt6
Version setzen
Merge branch 'release-v0.20'
Aktualisierung Dokumentation DumpXML
Aktualisierung Komponenten
Version v0.20
Merge branch 'release-v0.20'
Uebersetzung aktualisieren
field_config.ini: unix2dos
Aktualisierung von HISTORY.txt
Beschreibung des DumpXML-Datei-Formates
QCustomPlot: Anpassung an Qt 6.2
VD RPM units
"VD RMP*" Felder in "VD DZ*" umbenennen
To be more precise: I can not change the field names in DTA files but I can change the display name in DtaGUI. ;-)
Thanks for the hint. Probably the field names in the DTA files are misleading here. Will change the field names to "CP RS" (compressor revolution speed) and "VD DZ" (Verdichter Drehzahl).
fix DUMP Datei (elektrische Energie, AZ)
Merge branch 'dump' into develop
DUMP-oeffnen Action entfernt
DUMP: Feld Pe HH neu, field_config angepasst
Berechtigung dump.bz2 angepasst
DumpFile in DumpFile1 umbenennen
DumpFile hinzufuegen, DUMP-Datei Handhabung
Merge branch 'dumpxml' into develop
DumpFileXML hinzufuegen
Merge branch 'common_open' into develop
Berechnung der AZ auch aus DTA-Feld Motor1PowerOut
Merge branch 'dumpxml' into develop
String compare
VD RPM units
compile error
include von QIODevice vereinheitlichen
Lizenzinfo hinzufuegen
dtagui.pro: SVG hinzufuegen, Qt Version pruefen
Qt Version anpassen
dta2csv: Anpassungen an Qt6
einheitlicher VERSION_STRING in develop
QT_VERSION_CHECK verwenden
Merge branch 'master' of ssh://diskstation:/volume1/git/repos/opendta_src
Version setzen
merge branch release-v0.19
Merge branch 'master' of ssh://diskstation:/volume1/git/repos/opendta_src
dtagui.pro: SVG hinzufuegen, Qt Version pruefen
Lizenzinfo hinzufuegen
include von QIODevice vereinheitlichen
Qt Version anpassen