I have OpenDHCP server installed on 2 computers. Primary is 192.168.0.10, Secondary is 192.168.0.11. Viewing Lease Status on Primary shows all assigned addresses (as it should). Viewing on the Secondary shows no IP addresses assigned. I copied the config file from Primary, changed the ListenOn to the 0.11 address. Also changed the address for the link to lease status. Have stopped the service on Secondary, started service. Still does not show any leases. Will provide any additional information necessary...
I have OpenDHCP server installed on 2 computers. Primary is 192.168.0.10, Secondary is 192.168.0.11. Viewing Lease Status on Primary shows all assigned addresses (as it should). Viewing on the Secondary shows no IP addresses assigned. I coped the config file from Primary, changed the ListenOn to the 0.11 address. Also changed the address for the link to lease status. Have stopped the service on Secondary, started service. Still does not show any leases. Will provide any additional information necessary...
Hello, If the HTTP_INTERFACE is set to anything other than 127.0.0.1:6789, only other computers can get response from the web server. The computer running OpenDHCP cannot connect to itself. This isn't a firewall issue as I've tried disabling that. Regards, Alex
I just found that the upgrade from v1.75 to 1.82 overwrote my OpenDHCPServer.ini without any warning or creating a backup. I was devastated that I'd lost all my hours of hard work configuring dozens of static entries. (Yes I know I should have backed up the computer!) I must be very lucky though because I found I'd left a copy open and minimized in Notepad and managed to rescue it. Please make the installer create a backup INI or preserve any exiting one !! Thanks, Alex
Hello, I use openDHCP on a little intranet. It is to have internet on an intranet network. I'm in France and we have different internet providers. Mine is "Free" using range 192.168.0.0 to 192.168.0.254 and there is conflict. With "Orange" (another provider) the range is 192.168.1.0 to 192.168.1.254 and this runs without any problem. I use openDHCP as windows service and I saw there are parameters permitted, but I can't find any documentation on the internet. Perhaps are some parameters to use with...
I installed OpenDHCP on my home LAN six weeks ago. It has been running great until...