From: Orkhan B. <orx...@gm...> - 2012-03-13 01:34:27
|
how about MCC and MNC values? 2012/3/13 Samuel Liverpool <sam...@ho...> > I just have a suggestion for the Control.LUR.OpenRegistration value - you > should set it to all .. (I set mine to twenty periods (.)) which should > allow any IMSI and then narrowed it down the IMSIs I actually wanted to > allow. I would also look at some of the advice given to persons with > similar problems (myself included) to check that the ARFCN is free and that > you have a good clock. As well, try connecting from different distances. I > have found that being too close or too far with the default radio config > does not work. The kalibrate utility can also help in your troubleshooting. > > I am no expert but just sharing my experience. > > ------------------------------ > Date: Tue, 13 Mar 2012 02:15:13 +0200 > From: orx...@gm... > To: ale...@gm...; khe...@cs... > CC: ope...@li... > Subject: Re: [Openbts-discuss] problem running openbts system > > > I started wireshark along with OpenBTS and sipauthserve, and saw no > traffic other than udp and arp > > Since OpenBTS is supposed to register the test phone independent of > sipauthserve and it does not, I guess the problem is in OpenBTS > > I installed OpenBTS on two different computers but the results are the same > > Guidelines I follower are - > https://wush.net/trac/rangepublic/wiki/BuildInstallRun > > I got the installation files through svn > > Any suggestion at this point? > > On Mon, Mar 12, 2012 at 7:43 PM, Alexander Chemeris < > ale...@gm...> wrote: > > Orkhanб > > On Mon, Mar 12, 2012 at 20:40, Orkhan Badirkhanli <orx...@gm...> > wrote: > > Also, I entered my own sim's IMSI for Control.LUR.OpenRegistration, but > > still I when I try to connect to 00101 I get an error - "Your selected > > cellular network is no longer available" > > Are you sure you're using a good clock and there is no interference > from incumbents? Error sounds like your phone looses network because > of RF problems, not because of OpenBTS configuration problems. > > So I suggest you to check SIP traffic between OpenBTS and > SubscriberRegistry with Wireshark and if you don't see any traffic, > then check your hardware setup. > > > -- > Regards, > Alexander Chemeris. > > > > > -- > Orkhan > > ------------------------------------------------------------------------------ > Keep Your Developer Skills Current with LearnDevNow! The most comprehensive > online learning library for Microsoft developers is just $99.99! Visual > Studio, SharePoint, SQL - plus HTML5, CSS3, MVC3, Metro Style Apps, more. > Free future releases when you subscribe now! > http://p.sf.net/sfu/learndevnow-d2d > > _______________________________________________ Openbts-discuss mailing > list Ope...@li... > https://lists.sourceforge.net/lists/listinfo/openbts-discuss > > > ------------------------------------------------------------------------------ > Keep Your Developer Skills Current with LearnDevNow! > The most comprehensive online learning library for Microsoft developers > is just $99.99! Visual Studio, SharePoint, SQL - plus HTML5, CSS3, MVC3, > Metro Style Apps, more. Free future releases when you subscribe now! > http://p.sf.net/sfu/learndevnow-d2d > _______________________________________________ > Openbts-discuss mailing list > Ope...@li... > https://lists.sourceforge.net/lists/listinfo/openbts-discuss > > -- Orkhan |