From: Alexander C. <ale...@gm...> - 2011-06-17 11:47:46
|
Yes, it looks like a codec configuration problem in Asterisk. Alternatively - make sure you enable passing of GSM to IAX and that your IAX client supports GSM too. On Fri, Jun 17, 2011 at 15:38, keith <wh...@gm...> wrote: > If anybody can give some pointers here.. much appreciated.. I'm really > under pressure to get this working in the next few hours. > > I having problems with a lack of audio on calls. > > Tests today have gone a little like this: Connect MS and call the > asterisk echo test - PASSED > Connect two MS and call between them - PASSED > Call the outside world via diamondcard IAX - FAILED! > > I thought this might be due to the asterisk server being behind a NAT, > but no, Connecting a SIP client from another machine and calling out > over IAX works > > In both cases the calls are setup correctly, asterisk shows that the > call is making progress: > ".....is making progress passing it to SIP/xlite1-0000003e" or > "...passing it to SIP/IMSIXXXXXXX" in the case of the call from the handset > > but there's no audio on the GSM handset. > > I had all this working before in the lab, but now in the field I have > installed on a new machine (following all the same steps, but I may > have missed something) > Over the past few days I have tested everything except the air > interface due to license restrictions, but now this one important part > is not working. > > Could it be a codec problem in asterisk config? > > I don't want to clutter this mail with log/config files, but can send > on whatever... > > Thanks! > > k. > > ------------------------------------------------------------------------------ > EditLive Enterprise is the world's most technically advanced content > authoring tool. Experience the power of Track Changes, Inline Image > Editing and ensure content is compliant with Accessibility Checking. > http://p.sf.net/sfu/ephox-dev2dev > _______________________________________________ > Openbts-discuss mailing list > Ope...@li... > https://lists.sourceforge.net/lists/listinfo/openbts-discuss > -- Regards, Alexander Chemeris. |