From: David A. B. <dbu...@jc...> - 2010-11-23 17:23:06
|
USRP2 support is very early and will probably not be in the official release for a while, or at least until the original author chooses to put it there. Also, running rx and tx on the same board usually causes self- interference problems that severely limit the range of the unit. That is one of the reasons that the original developers never bothered with the USRP2. On Nov 22, 2010, at 6:44 PM, Eugene Blanchard wrote: > "This was one motivation for using the USRP2, which > will accept a 10MHz reference, despite still requiring sample rate > conversion on the host." > > I originally orderd a USRP2 kit in Oct of this year then found out > that it wasn't supported by OpenBTS, So I cancelled the order and > ordered a USRP kit instead. Then reading the latest postings, I > found out that the USRP2 is now supported. Oh well.. > > Eugene Blanchard > ICT Instructor > Information Technology Telecom Systems Major > Broadcast Systems Technology > SAIT Polytechnic > (403) 774-4875 David A. Burgess Kestrel Signal Processing, Inc. |