[openadsl-users] modprobe hangs on solos_pci insert

[Jim C. <jam...@gm...>]

Hello, I am trying to use the solos-pci driver on a "Multimedia controller:
Xilinx Corporation Spartan 3 Designs (Xilinx IP)".  I re-compiled my
3.12.13 kernel with the options as outlined in the solos pci README and the
atm howto.

When I restarted, the boot process would just hang on udev initialization.
 Using a rescue cd, I blacklisted the solos and atm modules and restarted.
 I then did a successful modprobe on the atm module.  When I ran 'modprobe
solos_pci', the command never returns, it hangs in the terminal.  In
another terminal window I can run dmesg and see:


[54828.407474] Solos PCI Driver Version 1.04
[54828.407753] pci 0000:00:08.0: setting latency timer to 64
[54828.407985] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 17
[54828.408033] solos 0000:01:06.0: Solos FPGA Version 255.255 svn-65535
[54828.408150] solos 0000:01:06.0: Registered ATM device 0
[54828.408200] solos 0000:01:06.0: Registered ATM device 1
[54828.408260] solos 0000:01:06.0: Registered ATM device 2
[54828.408314] solos 0000:01:06.0: Registered ATM device 3
[54828.408365] solos 0000:01:06.0: Registered ATM device 4
[54828.408409] solos 0000:01:06.0: Registered ATM device 5
[54828.408452] solos 0000:01:06.0: Registered ATM device 6
[54828.408498] solos 0000:01:06.0: Registered ATM device 7
[54828.408544] solos 0000:01:06.0: Registered ATM device 8
[54828.408601] solos 0000:01:06.0: Registered ATM device 9


I'm assuming that when udev tries to load the solos module, it's hanging
for whatever reason it hangs when I load it manually.  Any advice on how to
prevent the hang on modprobe?

Thanks,
Jim