[OSR-users] Problem with bond configuration

[Stefano E. <ste...@so...>]

Hi Marc,

I had read in the guide "Installing and Configuring a Shared Root  
Cluster"
that you can make the bond with interfaces, I'm trying to do it but I  
am having problems.
On the server in normal boot, without Open-Shared:

ifconfig
bond0     Link encap:Ethernet  HWaddr 00:15:60:56:75:FD
           inet addr:10.43.100.203  Bcast:10.43.255.255  Mask: 
255.255.0.0
           inet6 addr: fe80::215:60ff:fe56:75fd/64 Scope:Link
           UP BROADCAST RUNNING MASTER MULTICAST  MTU:1500  Metric:1
           RX packets:30897 errors:0 dropped:0 overruns:0 frame:0
           TX packets:332 errors:0 dropped:0 overruns:0 carrier:0
           collisions:0 txqueuelen:0
           RX bytes:2688920 (2.5 MiB)  TX bytes:38900 (37.9 KiB)

eth0      Link encap:Ethernet  HWaddr 00:15:60:56:75:FD
           inet6 addr: fe80::215:60ff:fe56:75fd/64 Scope:Link
           UP BROADCAST RUNNING SLAVE MULTICAST  MTU:1500  Metric:1
           RX packets:15657 errors:0 dropped:0 overruns:0 frame:0
           TX packets:326 errors:0 dropped:0 overruns:0 carrier:0
           collisions:0 txqueuelen:1000
           RX bytes:1363172 (1.3 MiB)  TX bytes:38408 (37.5 KiB)
           Interrupt:217

eth1      Link encap:Ethernet  HWaddr 00:15:60:56:75:FD
           inet6 addr: fe80::215:60ff:fe56:75fd/64 Scope:Link
           UP BROADCAST RUNNING SLAVE MULTICAST  MTU:1500  Metric:1
           RX packets:15240 errors:0 dropped:0 overruns:0 frame:0
           TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
           collisions:0 txqueuelen:1000
           RX bytes:1325748 (1.2 MiB)  TX bytes:492 (492.0 b)
           Interrupt:225



My cluster.conf is:

<?xml version="1.0"?>
<cluster config_version="5" name="cluOCFS2" type="ocfs2">

   <cman expected_votes="1" two_node="1"/>

     <clusternodes>

        <clusternode name="clu01" votes="1" nodeid="1">
            <com_info>
              <syslog name="clu01"/>
              <rootvolume name="/dev/sda2" fstype="ocfs2"/>
              <eth name="eth0" mac="00:15:60:56:75:FD" master=bond0  
slave=yes/>
              <eth name="eth1" mac="00:15:60:56:75:FC" master=bond0  
slave=yes/>
              <eth name="bond0" ip="10.43.100.203" mask="255.255.0.0"/>
              <fenceackserver user="root" passwd="test123"/>
            </com_info>
        </clusternode>

        <clusternode name="clu02" votes="1" nodeid="2">
            <com_info>
              <syslog name="clu01"/>
              <rootvolume name="/dev/sda2" fstype="ocfs2"/>
              <eth name="eth0" ip="10.43.100.187"  
mac="00:15:60:56:77:11"/>
              <fenceackserver user="root" passwd="test123"/>
            </com_info>
         </clusternode>

        <rm log_level="7" log_facility="local4">
          <failoverdomains>
                         <failoverdomain name="failover" ordered="0">
                                 <failoverdomainnode name="clu01"  
priority="1"/>
                         </failoverdomain>
                  </failoverdomains>
                  <resources>
                         <ip address="10.43.100.203" monitor_link="1"/>
                         <script file="/etc/init.d/httpd" name="httpd"/>
                  </resources>
                 <service autostart="0" domain="failover" name="HTTPD">
                         <ip ref="10.43.100.203"/>
                         <script ref="httpd"/>
                 </service>
        </rm>

      </clusternodes>

</cluster>

when Open-Shared start, it stopped saying that could not validate  
cluster configuration,
and I can not understand what the parameter of the cluster.conf is not  
validated.
I think that my bond configuration is not correct.

Thanks






Ing. Stefano Elmopi
Gruppo Darco - Area ICT Sistemi
Via Ostiense 131/L Corpo B, 00154 Roma

cell. 3466147165
tel.  0657060500
email:ste...@so...