Re: [Opalvoip-devel] FIR requests under SIP connection
Brought to you by:
csoutheren,
rjongbloed
Menu
▾
▴
Re: [Opalvoip-devel] FIR requests under SIP connection
|
From: Robert J. <ro...@vo...> - 2018-09-06 11:48:28
|
I have checked in a possible fix for this. It isn’t the SSRC==0 that was the problem, but the seq no == 0. ----- Robert Jongbloed Vox Lucida Pty. Ltd. On 5 Sep 2018, at 16:46, Alexander Sbitnev <ale...@gm... <mailto:ale...@gm...> > wrote: I found a problem with opal running SIP connection to Polycom videoconference server. H264 format was used for video. It turns out that even under normal network Polycom RMX sometimes issue FIR request and it is ignored on the opal side as no I-Frame is being forced into stream. Something like that popup in the log: 0:09.316 RTP-2-control:15856 rtp_session.cxx(1554) RTP Session 2, FIR from incorrect SSRC=0 (0x0) 0:09.316 RTP-2-control:15856 rtp_session.cxx(1730) RTP Session 2, received RFC5104 FIR: sn=0, last-sn=0, receiver SSRC=2279148435 (0x87d90b93), sender SSRC=0 (0x0) Yes there is warning about zero SSRC and that is how frame looks in wireshark: Frame 1461: 62 bytes on wire (496 bits), 62 bytes captured (496 bits) on interface 0 Ethernet II, Src: AccordVi_05:6d:79 (00:90:ca:05:6d:79), Dst: AsustekC_5c:53:7d (bc:ee:7b:5c:53:7d) Internet Protocol Version 4, Src: 10.0.55.191, Dst: 10.0.55.197 User Datagram Protocol, Src Port: 49225, Dst Port: 5669 Real-time Transport Control Protocol (Payload-specific Feedback) [Stream setup by SDP (frame 6)] 10.. .... = Version: RFC 1889 Version (2) ..0. .... = Padding: False ...0 0100 = RTCP Feedback message type (FMT): Full Intra Request (FIR) Command (4) Packet type: Payload-specific Feedback (206) Length: 4 (20 bytes) Sender SSRC: 0x00000000 (0) Media source SSRC: 0x8ebd4308 (2394768136) FIR 1 SSRC: 0x87d90b93 (2279148435) Command Sequence Number: 0 Reserved: 1 [RTCP frame length check: OK - 20 bytes] Polycom RMX in it's turn halt video stream to opal until I-Frame is finally arrive. As I remember FUR requests for same purpose works fine and force I-Frames into the stream. Is there support for FIR proccessing in opal? Can be SSRC field of request be the cause of this request ignorance? ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org <http://Slashdot.org> ! http://sdm.link/slashdot <http://sdm.link/slashdot> _______________________________________________ Opalvoip-devel mailing list Opa...@li... <mailto:Opa...@li...> https://lists.sourceforge.net/lists/listinfo/opalvoip-devel |
