omniprint-user

[Omniprint-user] The printer stops printing unexpectedly

[<tdl...@ya...>]

The problem is that when I send, through the printer
port using 'cat test.escp2 > /dev/lp0', a file
generated with gs+omni, the printer just prints a
piece of the whole image (i.e.
/usr/share/ghostscript/examples/6.53/tiger.ps) then it
ejects the paper and say that there's no paper (of
course there isn't: it had ejected). When you give it
paper again it resume the job but it's all lost.
I tried to print align.ps from www.linuxprinting.org
but I had the same problem.

Had anybody seen that with {gs,gs-esp}+omni ?
What must I do ? Is there hope ?

I could print a simple file genereted by Mozilla and
converted to ESCP2 by gs+omni and it looked good.

I'm using esp-gs 7.05-6 + omni 0.7.3 + Epson LQ 1070+
ESCP2, but I've tried with gs 6.53 7.05 esp-gs 7.07
and with omni 0.9.0.

I don't trust the problem is in the gs or esp-gs code.
I'm having problems to trust the problem is in the
omni code because I've already printed an entire page
many months ago. I'll try to turn off IEEE1284
transfer in the kernel, does anyone use it without any
problem?

For omni 0.7.3 I tried 'gs -q -dPARANOIDSAFER -dBATCH
-dNOPAUSE -sDEVICE=omni -sDeviceName=Epson_LQ_1070_
-sproperties="tray=TRAY_MANUAL_FEEDER
resolution=180x180" -sOutputFile=/root/test.escp2
-sPAPERSIZE=letter
/usr/share/ghostscript/6.53/examples/tiger.ps'

For omni 0.9.0 I tried 'gs -q -dPARANOIDSAFER -dBATCH
-dNOPAUSE -sDEVICE=omni -sDeviceName=XMLOmniDevice
-sproperties="XMLMasterFile=\"Epson LQ-1070+.xml\"
tray=TRAY_MANUAL_FEEDER resolution=180x180"
-sOutputFile=/root/test.escp2 -sPAPERSIZE=letter
/usr/share/ghostscript/6.53/examples/tiger.ps'

Thank you all.

PS: Have you already looked at Omni/docs/ ? It will be
a hard job to update that...

Yahoo! Mail - o melhor webmail do Brasil
http://mail.yahoo.com.br

Re: [Omniprint-user] The printer stops printing unexpectedly

[<tdl...@ya...>]

 --- "Thiago A. M. Delatorre" <tdl...@ya...>
escreveu: > The problem is that when I send, through
the printer
> port using 'cat test.escp2 > /dev/lp0', a file
> generated with gs+omni, the printer just prints a
> piece of the whole image (i.e.
> /usr/share/ghostscript/examples/6.53/tiger.ps) then
> it
> ejects the paper and say that there's no paper (of
> course there isn't: it had ejected). When you give
> it
> paper again it resume the job but it's all lost.
> I tried to print align.ps from www.linuxprinting.org
> but I had the same problem.
> 
> Had anybody seen that with {gs,gs-esp}+omni ?
> What must I do ? Is there hope ?
> 
> I could print a simple file genereted by Mozilla and
> converted to ESCP2 by gs+omni and it looked good.
> 
> I'm using esp-gs 7.05-6 + omni 0.7.3 + Epson LQ
> 1070+
> ESCP2, but I've tried with gs 6.53 7.05 esp-gs 7.07
> and with omni 0.9.0.
> 
> I don't trust the problem is in the gs or esp-gs
> code.
> I'm having problems to trust the problem is in the
> omni code because I've already printed an entire
> page
> many months ago. I'll try to turn off IEEE1284
> transfer in the kernel, does anyone use it without
> any
> problem?
> 
> For omni 0.7.3 I tried 'gs -q -dPARANOIDSAFER
> -dBATCH
> -dNOPAUSE -sDEVICE=omni -sDeviceName=Epson_LQ_1070_
> -sproperties="tray=TRAY_MANUAL_FEEDER
> resolution=180x180" -sOutputFile=/root/test.escp2
> -sPAPERSIZE=letter
> /usr/share/ghostscript/6.53/examples/tiger.ps'
> 
> For omni 0.9.0 I tried 'gs -q -dPARANOIDSAFER
> -dBATCH
> -dNOPAUSE -sDEVICE=omni -sDeviceName=XMLOmniDevice
> -sproperties="XMLMasterFile=\"Epson LQ-1070+.xml\"
> tray=TRAY_MANUAL_FEEDER resolution=180x180"
> -sOutputFile=/root/test.escp2 -sPAPERSIZE=letter
> /usr/share/ghostscript/6.53/examples/tiger.ps'
> 
> Thank you all.
> 
> PS: Have you already looked at Omni/docs/ ? It will
> be
> a hard job to update that...
> 

I've set the printer mode in the BIOS to SPP and I
could print perfectly the file 'tiger.ps' from gs
example files.

______________________________________________________________________

Yahoo! GeoCities: a maneira mais fácil de criar seu web site grátis!
http://br.geocities.yahoo.com/