Re: [Omniprint-user] The printer stops printing unexpectedly

[<tdl...@ya...>]

 --- "Thiago A. M. Delatorre" <tdl...@ya...>
escreveu: > The problem is that when I send, through
the printer
> port using 'cat test.escp2 > /dev/lp0', a file
> generated with gs+omni, the printer just prints a
> piece of the whole image (i.e.
> /usr/share/ghostscript/examples/6.53/tiger.ps) then
> it
> ejects the paper and say that there's no paper (of
> course there isn't: it had ejected). When you give
> it
> paper again it resume the job but it's all lost.
> I tried to print align.ps from www.linuxprinting.org
> but I had the same problem.
> 
> Had anybody seen that with {gs,gs-esp}+omni ?
> What must I do ? Is there hope ?
> 
> I could print a simple file genereted by Mozilla and
> converted to ESCP2 by gs+omni and it looked good.
> 
> I'm using esp-gs 7.05-6 + omni 0.7.3 + Epson LQ
> 1070+
> ESCP2, but I've tried with gs 6.53 7.05 esp-gs 7.07
> and with omni 0.9.0.
> 
> I don't trust the problem is in the gs or esp-gs
> code.
> I'm having problems to trust the problem is in the
> omni code because I've already printed an entire
> page
> many months ago. I'll try to turn off IEEE1284
> transfer in the kernel, does anyone use it without
> any
> problem?
> 
> For omni 0.7.3 I tried 'gs -q -dPARANOIDSAFER
> -dBATCH
> -dNOPAUSE -sDEVICE=omni -sDeviceName=Epson_LQ_1070_
> -sproperties="tray=TRAY_MANUAL_FEEDER
> resolution=180x180" -sOutputFile=/root/test.escp2
> -sPAPERSIZE=letter
> /usr/share/ghostscript/6.53/examples/tiger.ps'
> 
> For omni 0.9.0 I tried 'gs -q -dPARANOIDSAFER
> -dBATCH
> -dNOPAUSE -sDEVICE=omni -sDeviceName=XMLOmniDevice
> -sproperties="XMLMasterFile=\"Epson LQ-1070+.xml\"
> tray=TRAY_MANUAL_FEEDER resolution=180x180"
> -sOutputFile=/root/test.escp2 -sPAPERSIZE=letter
> /usr/share/ghostscript/6.53/examples/tiger.ps'
> 
> Thank you all.
> 
> PS: Have you already looked at Omni/docs/ ? It will
> be
> a hard job to update that...
> 

I've set the printer mode in the BIOS to SPP and I
could print perfectly the file 'tiger.ps' from gs
example files.

______________________________________________________________________

Yahoo! GeoCities: a maneira mais fácil de criar seu web site grátis!
http://br.geocities.yahoo.com/