Diff of /oggs_stm8_firmware_001.ewd [17cf07] .. [2637f7]  Maximize  Restore

  Switch to side-by-side view

--- a/oggs_stm8_firmware_001.ewd
+++ b/oggs_stm8_firmware_001.ewd
@@ -1,417 +1,417 @@
-<?xml version="1.0" encoding="iso-8859-1"?>
-
-<project>
-  <fileVersion>2</fileVersion>
-  <configuration>
-    <name>Debug</name>
-    <toolchain>
-      <name>STM8</name>
-    </toolchain>
-    <debug>1</debug>
-    <settings>
-      <name>C-SPY</name>
-      <archiveVersion>1</archiveVersion>
-      <data>
-        <version>1</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>CSpyMandatory</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CSpyInput</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CSpyRunToEnable</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CSpyRunToName</name>
-          <state>main</state>
-        </option>
-        <option>
-          <name>CSpyMacOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CSpyMacFile</name>
-          <state></state>
-        </option>
-        <option>
-          <name>DynDriver</name>
-          <state>STLINK_STM8</state>
-        </option>
-        <option>
-          <name>CSpyDDFOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CSpyDDFFile</name>
-          <state>$TOOLKIT_DIR$\config\ddf\iostm8s105c6.ddf</state>
-        </option>
-        <option>
-          <name>CSpyEnableExtraOptions</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CSpyExtraOptions</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CSpyImagesSuppressCheck1</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CSpyImagesPath1</name>
-          <state>C:\Dokumente und Einstellungen\Verwalter\Desktop\OggSteamer_STM8\oggstreamer-oggs-stm8-firmware-001\gen_patch\vsdsp_patch.hex</state>
-        </option>
-        <option>
-          <name>CSpyImagesSuppressCheck2</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CSpyImagesPath2</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CSpyImagesSuppressCheck3</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CSpyImagesPath3</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CSpyImagesOffset1</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CSpyImagesOffset2</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CSpyImagesOffset3</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CSpyImagesUse1</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CSpyImagesUse2</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CSpyImagesUse3</name>
-          <state>0</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>SIMULATOR_STM8</name>
-      <archiveVersion>1</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>SimMandatory</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>STICE_STM8</name>
-      <archiveVersion>1</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>STiceMandatory</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>STiceSuppressLoad</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>STiceVerifyLoad</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>STiceLogFileOver</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>STiceLogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>STiceUseSwim</name>
-          <state>0</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>STLINK_STM8</name>
-      <archiveVersion>1</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>STlinkMandatory</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>STlinkSuppressLoad</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>STlinkVerifyLoad</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>STlinkLogFileOver</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>STlinkLogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-      </data>
-    </settings>
-    <debuggerPlugins>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
-        <loadFlag>1</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\Stack\Stack.ENU.ewplugin</file>
-        <loadFlag>1</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
-        <loadFlag>1</loadFlag>
-      </plugin>
-    </debuggerPlugins>
-  </configuration>
-  <configuration>
-    <name>Release</name>
-    <toolchain>
-      <name>STM8</name>
-    </toolchain>
-    <debug>0</debug>
-    <settings>
-      <name>C-SPY</name>
-      <archiveVersion>1</archiveVersion>
-      <data>
-        <version>1</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>CSpyMandatory</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CSpyInput</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CSpyRunToEnable</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CSpyRunToName</name>
-          <state>main</state>
-        </option>
-        <option>
-          <name>CSpyMacOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CSpyMacFile</name>
-          <state></state>
-        </option>
-        <option>
-          <name>DynDriver</name>
-          <state>SIMULATOR_STM8</state>
-        </option>
-        <option>
-          <name>CSpyDDFOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CSpyDDFFile</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CSpyEnableExtraOptions</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CSpyExtraOptions</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CSpyImagesSuppressCheck1</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CSpyImagesPath1</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CSpyImagesSuppressCheck2</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CSpyImagesPath2</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CSpyImagesSuppressCheck3</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CSpyImagesPath3</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CSpyImagesOffset1</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CSpyImagesOffset2</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CSpyImagesOffset3</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CSpyImagesUse1</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CSpyImagesUse2</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CSpyImagesUse3</name>
-          <state>0</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>SIMULATOR_STM8</name>
-      <archiveVersion>1</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>SimMandatory</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>STICE_STM8</name>
-      <archiveVersion>1</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>STiceMandatory</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>STiceSuppressLoad</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>STiceVerifyLoad</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>STiceLogFileOver</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>STiceLogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>STiceUseSwim</name>
-          <state>0</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>STLINK_STM8</name>
-      <archiveVersion>1</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>STlinkMandatory</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>STlinkSuppressLoad</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>STlinkVerifyLoad</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>STlinkLogFileOver</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>STlinkLogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-      </data>
-    </settings>
-    <debuggerPlugins>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
-        <loadFlag>1</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\Stack\Stack.ENU.ewplugin</file>
-        <loadFlag>1</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
-        <loadFlag>1</loadFlag>
-      </plugin>
-    </debuggerPlugins>
-  </configuration>
-</project>
-
-
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>
+  <configuration>
+    <name>Debug</name>
+    <toolchain>
+      <name>STM8</name>
+    </toolchain>
+    <debug>1</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>1</debug>
+        <option>
+          <name>CSpyMandatory</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CSpyInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CSpyRunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CSpyRunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CSpyMacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CSpyMacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DynDriver</name>
+          <state>STLINK_STM8</state>
+        </option>
+        <option>
+          <name>CSpyDDFOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CSpyDDFFile</name>
+          <state>$TOOLKIT_DIR$\config\ddf\iostm8s105c6.ddf</state>
+        </option>
+        <option>
+          <name>CSpyEnableExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CSpyExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CSpyImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CSpyImagesPath1</name>
+          <state>C:\Dokumente und Einstellungen\Verwalter\Desktop\OggSteamer_STM8\oggstreamer-oggs-stm8-firmware-001\gen_patch\vsdsp_patch.hex</state>
+        </option>
+        <option>
+          <name>CSpyImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CSpyImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CSpyImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CSpyImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CSpyImagesOffset1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CSpyImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CSpyImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CSpyImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CSpyImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CSpyImagesUse3</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>SIMULATOR_STM8</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>1</debug>
+        <option>
+          <name>SimMandatory</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_STM8</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>1</debug>
+        <option>
+          <name>STlinkMandatory</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>STlinkSuppressLoad</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>STlinkVerifyLoad</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>STlinkLogFileOver</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>STlinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STICE_STM8</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>1</debug>
+        <option>
+          <name>STiceMandatory</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>STiceSuppressLoad</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>STiceVerifyLoad</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>STiceLogFileOver</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>STiceLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>STiceUseSwim</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration>
+  <configuration>
+    <name>Release</name>
+    <toolchain>
+      <name>STM8</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CSpyMandatory</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CSpyInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CSpyRunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CSpyRunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CSpyMacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CSpyMacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DynDriver</name>
+          <state>SIMULATOR_STM8</state>
+        </option>
+        <option>
+          <name>CSpyDDFOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CSpyDDFFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CSpyEnableExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CSpyExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CSpyImagesSuppressCheck1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CSpyImagesPath1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CSpyImagesSuppressCheck2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CSpyImagesPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CSpyImagesSuppressCheck3</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CSpyImagesPath3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CSpyImagesOffset1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CSpyImagesOffset2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CSpyImagesOffset3</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CSpyImagesUse1</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CSpyImagesUse2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CSpyImagesUse3</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>SIMULATOR_STM8</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>SimMandatory</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_STM8</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>STlinkMandatory</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>STlinkSuppressLoad</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>STlinkVerifyLoad</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>STlinkLogFileOver</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>STlinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STICE_STM8</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>STiceMandatory</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>STiceSuppressLoad</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>STiceVerifyLoad</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>STiceLogFileOver</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>STiceLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>STiceUseSwim</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration>
+</project>
+
+

Get latest updates about Open Source Projects, Conferences and News.

Sign up for the SourceForge newsletter:





No, thanks