Re: [Ocf-linux-users] SafeXcel 1141

[Nawang C. <naw...@gm...>]

Hi David,
               I just tried the simple ocf-bench test program with
SafeXcel 1141 card. But all the operations fail.
I am attaching a tar ball which contains following three files:
1. lsmod.txt
2. lspci.txt
3. ocfbench-dmesg.txt
with respective details.

Please have a look at them.

Thanks a lot.



On 9/5/07, David McCullough <Dav...@se...> wrote:
>
> Jivin Nawang Chhetan lays it down ...
> > Hi David,
> >                I am trying to run "bench-ocf" with safe.ko . I dont
> > see any debug messages( I insert the modules with debug messages
> > enabled).  Seems even though open-ssl does all the stuff mentioned in
> > the script "bench-ocf", 1141 card is not used. Can you give me some
> > directions here ?
>
> Send me the output of:
>
>         lsmod
>
> If you want to be sure only the safenet driver is used,  make sure that
> you do not load cryptosoft or any other crypto driver.  Just load:
>
>         ocf
>         safe
>         cryptodev
>
> Cheers,
> Davidm
>
> > On 9/5/07, David McCullough <Dav...@se...> wrote:
> > >
> > > Jivin Nawang Chhetan lays it down ...
> > > > Hi David,
> > > >                I was testing OCF with SafeXcel 1141 card. Just wanted
> > > > to know which version of the 1141 card you tested OCF with i.e. REV1
> > > > or REV1.1.
> > >
> > > I think I have used both as I had to work around a bug in version1 IIRC.
> > > I have also used the 1741.
> > >
> > > Note that none of these were cards,  but PCI chips on an embedded board,
> > > but they look like cards ;-)
> > >
> > > Cheers,
> > > Davidm
> > >
> > > --
> > > David McCullough,  dav...@se...,   Ph:+61 734352815
> > > Secure Computing - SnapGear  http://www.uCdot.org http://www.cyberguard.com
> > >
> >
> >
> > --
> > Nawang Chhetan
> > Software Engineer
> > SafeNet India.
> >
>
> --
> David McCullough,  dav...@se...,   Ph:+61 734352815
> Secure Computing - SnapGear  http://www.uCdot.org http://www.cyberguard.com
>