Re: [Ocf-linux-users] OCF driver for Marvell Kirkwood (88F6xxx) Processors
Brought to you by:
david-m
Menu
▾
▴
Re: [Ocf-linux-users] OCF driver for Marvell Kirkwood (88F6xxx) Processors
|
From: Flaig, P. <Pat...@bd...> - 2010-08-11 16:07:30
|
Hi David, Thanks a lot, the additional lines in the Makefile let me compile the Feroceon driver. I've now compiled the OCF module and the driver directly into the kernel. I think I've now an understanding problem, how to configure OCF the right way. Do I have to configure the cryptographic API as well, with all the algorithms I want? How can I make sure that, if I have selected AES for example, the hardware acceleration is used? /proc/crypto is only showing module: kernel. Patrick -----Original Message----- From: David McCullough [mailto:dav...@mc...] Sent: Wednesday, August 11, 2010 9:03 AM To: Flaig, Patrick Cc: ocf...@li... Subject: Re: [Ocf-linux-users] OCF driver for Marvell Kirkwood (88F6xxx) Processors Jivin Flaig, Patrick lays it down ... > Thanks David, > > that would be great! Try adding the following two lines to your Makefile and see how you go: mv_cesa-y += mvHal/mv_hal/ddr2/spd/mvSpd.o mvHal/mv78xx0_family/device/mvDevice.o mv_cesa-y += mvHal/mv_hal/eth-phy/mvEthPhy.o mvHal/mv_hal/cntmr/mvCntmr.o Cheers, Davidm > Patrick > -----Original Message----- > From: David McCullough [mailto:dav...@mc...] > Sent: Monday, August 09, 2010 1:36 PM > To: Flaig, Patrick > Cc: ocf...@li... > Subject: Re: [Ocf-linux-users] OCF driver for Marvell Kirkwood > (88F6xxx) Processors > > > Jivin Flaig, Patrick lays it down ... > > Hi David, > > > > Did you already have the chance to look into the driver for the Feroceon? > > Sorry, I'm a little busy just now, I intend to look at it for you soon, hopefully later in the week. > > Sorry, I meant to let you know :-( > > Cheers, > Davidm > > > > > Patrick > > > > -----Original Message----- > > From: Flaig, Patrick > > Sent: Tuesday, August 03, 2010 5:41 PM > > To: 'David McCullough' > > Cc: 'ocf...@li...' > > Subject: RE: [Ocf-linux-users] OCF driver for Marvell Kirkwood > > (88F6xxx) Processors > > > > Hi David, > > > > As said the OCF driver for Kirkwood is now compiling. But I still have some issues when porting the driver for Feroceon. > > > > I've attached my modified drivers; maybe you can take a look into it and resolve the one or other dependency. > > I think you are more familiar with the Kirkwood driver and it should be easier for you to get the Feroceon driver compiling. > > > > Thanks a lot and best regards. > > > > Patrick > > > > -----Original Message----- > > From: Flaig, Patrick > > Sent: Tuesday, August 03, 2010 2:30 PM > > To: 'David McCullough' > > Cc: ocf...@li... > > Subject: RE: [Ocf-linux-users] OCF driver for Marvell Kirkwood > > (88F6xxx) Processors > > > > Hi David, > > > > Thanks, for the files, now I'm able to compile the driver. > > When I finished porting the driver for the feroceon platform I also can send you the code, for further use in the OCF project. > > > > One comment from me, I think in the current release mvAesBoxes.dat is also missing. > > > > Is there a next release planned with fixes for the issues we found? > > > > Patrick > > > > -----Original Message----- > > From: David McCullough [mailto:dav...@mc...] > > Sent: Tuesday, August 03, 2010 11:39 AM > > To: Flaig, Patrick > > Cc: ocf...@li... > > Subject: Re: [Ocf-linux-users] OCF driver for Marvell Kirkwood > > (88F6xxx) Processors > > > > > > Jivin Flaig, Patrick lays it down ... > > > Hi, > > > > > > the mv_cesa.h is a Marvell specific file, which they use in their SDKs for the different processors. > > > I will now cross check my SDK if, there is an additional mv_cesa.h which I have to use. > > > My only problem is that I only have a SDK for the Feroceon not for the Kirkwood. > > > > > > Initially I only wanted to port the kirkwood driver to the feroceon platform, but then I saw that it is not possible to compile the kirkwood OCF driver. > > > So I think I have to fix this first to continue with porting the driver. > > > > A couple of things, attached is the mv_cesa.h from my kernel, not much in there really. > > > > Also a patch the was not in the last release which will fix the copyback errors you were seeing. > > > > Cheers, > > Davidm > > > > > > > > > -----Urspr??ngliche Nachricht----- > > > Von: David McCullough [mailto:dav...@mc...] > > > Gesendet: Dienstag, 3. August 2010 02:58 > > > An: Flaig, Patrick > > > Cc: ocf...@li... > > > Betreff: Re: [Ocf-linux-users] OCF driver for Marvell Kirkwood > > > (88F6xxx) Processors > > > > > > > > > Jivin Flaig, Patrick lays it down ... > > > > Hi, > > > > > > > > Thanks for the hint, but where should this file or the directory "plat" be? > > > > Is mv_cesa.h the same as under crypto/ocf/Kirkwood/cesa? > > > > > > > > But when it is the same, why is it included twice > > > > <cesa/mv_cesa.h> and <plat/mv_cesa.h> > > > > > > I think that plat/mv_cesa.h comes from the linux kernel. > > > > > > Cheers, > > > Davidm > > > > > > > -----Original Message----- > > > > From: added by portage for apache > > > > [mailto:ap...@at...] On Behalf Of > > > > md...@as... > > > > Sent: Monday, August 02, 2010 4:59 PM > > > > To: Flaig, Patrick > > > > Subject: Re: [Ocf-linux-users] OCF driver for Marvell Kirkwood > > > > (88F6xxx) Processors > > > > > > > > Hi > > > > Ignore the warnings > > > > make sure that the following file exists and you include it: > > > > plat/mv_cesa.h > > > > >> crypto/ocf/kirkwood/cesa_ocf_drv.c:49:26: error: plat/mv_cesa.h: > > > > >> No such file >>or directory > > > > Regards > > > > Mihalis > > > > > > > > Quoting "Flaig, Patrick" <Pat...@bd...>: > > > > > > > > > Hello, > > > > > > > > > > Maybe someone can help me; I'm getting some compile errors when > > > > > trying to compile the OCF driver for Marvell Kirkwood. > > > > > > > > > > I'm using a Kernel 2.6.31.14 with the latest OCF patches > > > > > (ocf-linux-26-20100325.patch) and the Marvell SDK 3.2 cross > > > > > compilers (arm-mv5vfp-linux-gnueabi). > > > > > > > > > > OCF without this driver enabled compiles without any problems. > > > > > > > > > > Here is the output of the build process: > > > > > > > > > > make ARCH=arm CROSS_COMPILE=arm-mv5vfp-linux-gnueabi- uImage > > > > > scripts/kconfig/conf -s arch/arm/Kconfig > > > > > CHK include/linux/version.h > > > > > make[1]: `include/asm-arm/mach-types.h' is up to date. > > > > > CHK include/linux/utsrelease.h > > > > > SYMLINK include/asm -> include/asm-arm > > > > > CALL scripts/checksyscalls.sh > > > > > <stdin>:1351:2: warning: #warning syscall migrate_pages not > > > > > implemented > > > > > <stdin>:1407:2: warning: #warning syscall pselect6 not > > > > > implemented > > > > > <stdin>:1411:2: warning: #warning syscall ppoll not > > > > > implemented > > > > > <stdin>:1451:2: warning: #warning syscall epoll_pwait not implemented > > > > > CHK include/linux/compile.h > > > > > CC crypto/ocf/kirkwood/cesa/mvCesa.o > > > > > CC crypto/ocf/kirkwood/cesa/mvLru.o > > > > > CC crypto/ocf/kirkwood/cesa/mvMD5.o > > > > > CC crypto/ocf/kirkwood/cesa/mvSHA1.o > > > > > CC crypto/ocf/kirkwood/cesa/AES/mvAesAlg.o > > > > > crypto/ocf/kirkwood/cesa/AES/mvAesAlg.c:13:26: error: > > > > > mvAesBoxes.dat: No such file or directory > > > > > crypto/ocf/kirkwood/cesa/AES/mvAesAlg.c: In function 'mul1': > > > > > crypto/ocf/kirkwood/cesa/AES/mvAesAlg.c:29: error: 'mask' > > > > > undeclared (first use in this function) > > > > > crypto/ocf/kirkwood/cesa/AES/mvAesAlg.c:29: error: (Each undeclared > > > > > identifier is reported only once > > > > > crypto/ocf/kirkwood/cesa/AES/mvAesAlg.c:29: error: for each > > > > > function it appears in.) > > > > > crypto/ocf/kirkwood/cesa/AES/mvAesAlg.c:29: error: 'Alogtable' > > > > > undeclared (first use in this function) > > > > > crypto/ocf/kirkwood/cesa/AES/mvAesAlg.c:29: error: 'Logtable' > > > > > undeclared (first use in this function) > > > > > crypto/ocf/kirkwood/cesa/AES/mvAesAlg.c: In function 'MixColumn': > > > > > crypto/ocf/kirkwood/cesa/AES/mvAesAlg.c:151: error: 'mask' > > > > > undeclared (first use in this function) > > > > > crypto/ocf/kirkwood/cesa/AES/mvAesAlg.c:151: error: 'Alogtable' > > > > > undeclared (first use in this function) > > > > > crypto/ocf/kirkwood/cesa/AES/mvAesAlg.c:151: error: 'Logtable' > > > > > undeclared (first use in this function) > > > > > crypto/ocf/kirkwood/cesa/AES/mvAesAlg.c: In function 'InvMixColumn': > > > > > crypto/ocf/kirkwood/cesa/AES/mvAesAlg.c:169: error: 'mask' > > > > > undeclared (first use in this function) > > > > > crypto/ocf/kirkwood/cesa/AES/mvAesAlg.c:169: error: 'Alogtable' > > > > > undeclared (first use in this function) > > > > > crypto/ocf/kirkwood/cesa/AES/mvAesAlg.c:169: error: 'Logtable' > > > > > undeclared (first use in this function) > > > > > crypto/ocf/kirkwood/cesa/AES/mvAesAlg.c: In function 'rijndaelKeySched': > > > > > crypto/ocf/kirkwood/cesa/AES/mvAesAlg.c:221: error: 'S' undeclared > > > > > (first use in this function) > > > > > crypto/ocf/kirkwood/cesa/AES/mvAesAlg.c:222: error: 'rcon' > > > > > undeclared (first use in this function) > > > > > crypto/ocf/kirkwood/cesa/AES/mvAesAlg.c: In function 'rijndaelEncrypt128': > > > > > crypto/ocf/kirkwood/cesa/AES/mvAesAlg.c:261: error: 'S' undeclared > > > > > (first use in this function) > > > > > crypto/ocf/kirkwood/cesa/AES/mvAesAlg.c: In function 'rijndaelDecrypt128': > > > > > crypto/ocf/kirkwood/cesa/AES/mvAesAlg.c:298: error: 'Si' undeclared > > > > > (first use in this function) > > > > > make[3]: *** [crypto/ocf/kirkwood/cesa/AES/mvAesAlg.o] Error 1 > > > > > make[2]: *** [crypto/ocf/kirkwood] Error 2 > > > > > make[1]: *** [crypto/ocf] Error 2 > > > > > make: *** [crypto] Error 2 > > > > > > > > > > I was able to add the missing mvAesBoxes.dat(from the original > > > > > Marvell Kirkwood kernel), but still some compile errors. > > > > > > > > > > make ARCH=arm CROSS_COMPILE=arm-mv5vfp-linux-gnueabi- uImage > > > > > CHK include/linux/version.h > > > > > make[1]: `include/asm-arm/mach-types.h' is up to date. > > > > > CHK include/linux/utsrelease.h > > > > > SYMLINK include/asm -> include/asm-arm > > > > > CALL scripts/checksyscalls.sh > > > > > <stdin>:1351:2: warning: #warning syscall migrate_pages not > > > > > implemented > > > > > <stdin>:1407:2: warning: #warning syscall pselect6 not > > > > > implemented > > > > > <stdin>:1411:2: warning: #warning syscall ppoll not > > > > > implemented > > > > > <stdin>:1451:2: warning: #warning syscall epoll_pwait not implemented > > > > > CHK include/linux/compile.h > > > > > CC crypto/ocf/kirkwood/cesa/AES/mvAesAlg.o > > > > > CC crypto/ocf/kirkwood/cesa/AES/mvAesApi.o > > > > > CC crypto/ocf/kirkwood/cesa/mvCesaDebug.o > > > > > crypto/ocf/kirkwood/cesa/mvCesaDebug.c: In function 'mvCesaDebugStatus': > > > > > crypto/ocf/kirkwood/cesa/mvCesaDebug.c:270: warning: format '%ld' > > > > > expects type 'long int', but argument 4 has type 'unsigned int' > > > > > crypto/ocf/kirkwood/cesa/mvCesaDebug.c:278: warning: format '%ld' > > > > > expects type 'long int', but argument 4 has type 'unsigned int' > > > > > crypto/ocf/kirkwood/cesa/mvCesaDebug.c: In function 'mvCesaDebugQueue': > > > > > crypto/ocf/kirkwood/cesa/mvCesaDebug.c:306: warning: format '%ld' > > > > > expects type 'long int', but argument 5 has type 'unsigned int' > > > > > crypto/ocf/kirkwood/cesa/mvCesaDebug.c: In function 'mvCesaDebugSramSA': > > > > > crypto/ocf/kirkwood/cesa/mvCesaDebug.c:358: warning: format '%ld' > > > > > expects type 'long int', but argument 3 has type 'unsigned int' > > > > > crypto/ocf/kirkwood/cesa/mvCesaDebug.c: In function 'mvCesaDebugSram': > > > > > crypto/ocf/kirkwood/cesa/mvCesaDebug.c:425: warning: format '%ld' > > > > > expects type 'long int', but argument 2 has type 'unsigned int' > > > > > crypto/ocf/kirkwood/cesa/mvCesaDebug.c:434: warning: format '%ld' > > > > > expects type 'long int', but argument 2 has type 'unsigned int' > > > > > CC crypto/ocf/kirkwood/cesa_ocf_drv.o > > > > > crypto/ocf/kirkwood/cesa_ocf_drv.c:49:26: error: plat/mv_cesa.h: No > > > > > such file or directory > > > > > crypto/ocf/kirkwood/cesa_ocf_drv.c: In function 'cesa_ocf_process': > > > > > crypto/ocf/kirkwood/cesa_ocf_drv.c:501: error: implicit declaration > > > > > of function 'crypto_copy_bits_back' > > > > > crypto/ocf/kirkwood/cesa_ocf_drv.c: In function 'setup_tdma_mbus_windows': > > > > > crypto/ocf/kirkwood/cesa_ocf_drv.c:1115: error: dereferencing > > > > > pointer to incomplete type > > > > > crypto/ocf/kirkwood/cesa_ocf_drv.c:1116: error: dereferencing > > > > > pointer to incomplete type > > > > > crypto/ocf/kirkwood/cesa_ocf_drv.c:1117: error: dereferencing > > > > > pointer to incomplete type > > > > > crypto/ocf/kirkwood/cesa_ocf_drv.c: In function 'mv_cesa_ocf_init': > > > > > crypto/ocf/kirkwood/cesa_ocf_drv.c:1201: warning: format '%x' > > > > > expects type 'unsigned int', but argument 4 has type 'void *' > > > > > crypto/ocf/kirkwood/cesa_ocf_drv.c: At top level: > > > > > crypto/ocf/kirkwood/cesa_ocf_drv.c:1271: warning: initialization > > > > > from incompatible pointer type > > > > > make[3]: *** [crypto/ocf/kirkwood/cesa_ocf_drv.o] Error 1 > > > > > make[2]: *** [crypto/ocf/kirkwood] Error 2 > > > > > make[1]: *** [crypto/ocf] Error 2 > > > > > make: *** [crypto] Error 2 > > > > > > > > > > Any help or support is welcome :) > > > > > > > > > > Thanks and regards. > > > > > > > > > > Patrick > > > > > > > > > > > > > > > > > > > > > > > > > ---------------------------------------------------------------- > > > > -- > > > > -- > > > > ---------- The Palm PDK Hot Apps Program offers developers who > > > > use the Plug-In Development Kit to bring their C/C++ apps to > > > > Palm for a share of $1 Million in cash or HP Products. Visit us > > > > here for more > > > > details: > > > > http://p.sf.net/sfu/dev2dev-palm > > > > _______________________________________________ > > > > Ocf-linux-users mailing list > > > > Ocf...@li... > > > > https://lists.sourceforge.net/lists/listinfo/ocf-linux-users > > > > > > > > > > > > > > -- > > > David McCullough, dav...@mc..., Ph:+61 734352815 > > > McAfee - SnapGear http://www.mcafee.com http://www.uCdot.org > > > > > > > > > > -- > > David McCullough, dav...@mc..., Ph:+61 734352815 > > McAfee - SnapGear http://www.mcafee.com http://www.uCdot.org > > > > > > -- > David McCullough, dav...@mc..., Ph:+61 734352815 > McAfee - SnapGear http://www.mcafee.com http://www.uCdot.org > > -- David McCullough, dav...@mc..., Ph:+61 734352815 McAfee - SnapGear http://www.mcafee.com http://www.uCdot.org |
