Documentation errata

An open process control and laser engraving software solution

Brought to you by: oxygenic

Documentation errata

Forum: OpenSDK programming

Creator: Randolf Hoffmann

Created: 2022-08-12

Updated: 2022-08-16

Randolf Hoffmann - 2022-08-12

Hi folks,

I'm just reading through the Beam-SDK manual and found some minor errors. Since I like to replace errors and because I do not know how to fork here (maybe I am just to stupid....) I want to open this thread for the owners of the repository, so they can review my suggestions, which may of course be wrong.

So starting with this:
page 48: tag "Power" -> Wrong description, should be "Specifies the marking power in 1/1000%" not marking frequency.

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Randolf Hoffmann - 2022-08-12

page 91, section 1.7.5.: This section describes all matrix

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Randolf Hoffmann - 2022-08-12

You may find this ridiculous, but as a non native english speaker I am always confused with errors, such as these
p. 114, Section 1.8.1 : "packets to a scanner controller plug-ins binary input 7" must be: "packets to a scanner controller plug-in's binary input 7"

Last edit: Randolf Hoffmann 2022-08-12

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Randolf Hoffmann - 2022-08-16

p.76, Section 1.6.1.19 Element Tags for Additional Element Hatcher
Field "Angle" error in the unit, must be "millidegree" or "m-degree", not "µ-degree" otherwise the value makes no sense AND the c#Example either

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Log in to post a comment.