Hi,
nvtv (0.4.7) did work great with my old Geforce2MX400 -
but not with my new GeforceFX5200 (Gainward Pro/680,
http://www.gainward.com/html/product/vga/fx/5200/680tvdvi.htm\).
The TV-Out port works using nVidias TwinView driver
options, but unfortunately not when using nvtv.
Playing arround with the "Fake chip" options in the
sourcecode results int nothing different or just a
SegFault.
Some information is added below, if something important
is missing or I could perform furthert tests - just
mail me.
Thanks in advance,
Michael
----------------------------------------------
"nvtv -l" says:
Null chip: create
Modes for Unknown chip (0:A0) on GeForce FX 5200 (01:00.00)
----------------------------------------------
"nvtv -P" says:
NVTV 0.4.7 Probe
GeForce FX 5200 (01:00.00) (0322) io=0xE8000000
Null chip: create
MC_boot=034200A2 FB_boot=00000000 FB_conf=19D10011
EXT_boot=A140E11F
PCRTC 1/2:
Assoc = 00001110 Config = 00000002
PRAMDAC 1/2:
PLL coeff = 10000700 0x524 = 00000000 VPLL
= 00029A09 / 00045405
Gen Ctrl = 20100130 Test Ctrl = F0000000 TV Setup
= 00000000
FP Test = 00000000 TG Ctrl = 21100022 FP Debug
= 31101111
TV blank = v= 00000000-00000000 h=
00000000-00000000 40000000
TV slave = v= 00000000-00000000 h=
00000000-00000000 00000000,00000000
TV slave' = 00000000
PCRTC 2/2:
Assoc = 00000000 Config = 00000000
PRAMDAC 2/2:
PLL coeff = 00000000 0x524 = 00000000 VPLL
= 0006DF5F / 00045405
Gen Ctrl = 00000100 Test Ctrl = F0010000 TV Setup
= 00000001
FP Test = 00000000 TG Ctrl = 11100011 FP Debug
= 21101111
TV blank = v= 00000000-00000000 h=
00000000-00000000 40000000
TV slave = v= 00000000-00000000 h=
00000000-00000000 00000000,00000000
TV slave' = 00000000
CRT registers 1/2:
00: AF 7F 7F 93 85 9D 20 F5 00 60 06 07 00 00 3F FF
10: 02 8C FF 00 00 FF 21 E3 FF 40 3C 93 3C 00 00 03
20: AC FE 20 A1 80 00 3F A2 03 00 00 03 00 10 00 0F
30: F7 E1 00 08 12 02 3E 31 00 FF 03 22 78 00 3F 31
40: 00 00 00 01 00 80 00 00 00 54 00 01 00 65 66 00
50: 3E 31 0C 40 00 40 00 00 00 00 00 10 00 56 66 00
60: 5F 4F 50 62 5C 5D 00 01 0B 02 8F 01 08 02 08 02
70: 0C 09 5F 4F 50 62 54 60 00 00 BF 01 8F 01 96 01
80: 9C 01 B9 9E 00 00 00 00 00 00 00 00 00 22 22 00
90: 25 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
CRT registers 2/2:
00: 5F 4F 50 82 54 80 BF 1F 00 47 06 07 00 00 3F FF
10: 9C 8E 8F 28 08 96 B9 A3 FF 00 3D 85 18 00 00 03
20: 80 FA 20 A1 80 10 3F A2 00 00 00 00 00 00 00 00
30: 00 00 00 00 02 02 32 30 00 FF 00 00 00 00 32 30
40: 00 00 00 01 00 00 00 00 00 00 00 00 10 21 22 00
50: 33 30 08 00 00 00 14 00 7F 00 00 00 00 12 22 00
60: 5F 4F 50 62 5C 5D 00 01 0B 02 8F 01 08 02 08 02
70: 0C 09 5F 4F 50 62 54 60 00 00 BF 01 8F 01 96 01
80: 9C 01 B9 9E 00 00 00 00 00 00 00 00 00 22 22 00
90: 25 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ATTR registers 1/2:
00: 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
10: 01 00 0F 00 00 05 0F 07 09 09 0F 0B 0C 0D 0F 0F
ATTR registers 2/2:
00: 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
10: 0C 00 0F 08 00 05 0F 0F 0C 09 0F 0B 0C 0D 0F 0F
SEQ registers 1/2:
00: 03 01 0F 00 0E 00 00 00 03 01 0F 00 0E 00 00 00
GR registers 1/2:
00: 00 00 00 00 00 40 05 0F FF 00 00 00 00 00 00 00
MISC registers 1/2:
input0=70 vse=01 feat=00 misc=EB
SEQ registers 2/2:
00: 03 00 03 00 02 00 00 00 03 00 03 00 02 00 00 00
GR registers 2/2:
00: 00 00 00 00 00 10 0E 00 FF 00 00 00 00 00 00 00
MISC registers 2/2:
input0=70 vse=01 feat=00 misc=67
I2C Devices: 0:A0 0:A2
----------------------------------------------
Some info from 'lspci -vvv':
0000:01:00.0 VGA compatible controller: nVidia
Corporation NV34 [GeForce FX 5200] (rev a1) (prog-if 00
[VGA])
Subsystem: CardExpert Technology: Unknown
device 0427
Control: I/O+ Mem+ BusMaster+ SpecCycle-
MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 248 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 4
Region 0: Memory at e8000000 (32-bit,
non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (32-bit,
prefetchable) [size=256M]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2-
AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 3.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+
ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=32 ArqSz=0 Cal=0 SBA- AGP+
GART64- 64bit- FW- Rate=x4
----------------------------------------------
Some additional info from /proc:
/proc/driver/nvidia/version:
NVRM version: NVIDIA Linux x86 NVIDIA Kernel Module
1.0-6111 Tue Jul 27 07:55:38 PDT 2004
GCC version: gcc version 3.3.4 (Debian 1:3.3.4-13)
/proc/driver/nvidia/agp/host-bridge:
Host Bridge: VIA Technologies, Inc. VT8366/A/7
[Apollo KT266/A/333]
Fast Writes: Supported
SBA: Supported
AGP Rates: 4x 2x 1x
Registers: 0x1f000217:0x00000104
----------------------------------------------
eros:/proc/driver/nvidia/agp/status
Status: Enabled
Driver: AGPGART
AGP Rate: 4x
Fast Writes: Disabled
SBA: Disabled
Log in to post a comment.