nsob modified by Anonymous

Anonymous — Wed, 01 Apr 2015 22:46:59 -0000

Networked Small Object Broker (nsob)

nsdci/dcicommon/sob.c

Introduction

The Networked Small Object Broker (nsob) is used to broker data between servers. You must set up a "nsob client" to send and request data, and a "nsob server" to broker data. The api is only exposed when properly configured. See the "Configuration" section for more information.

Additional Reading: rpc, ncf

TCL API

--------------------------------------------------------------------------------

nsob.put

Used to put data from a client to the server. If sendflush is enabled (default), a ncf message will be sent to all clients.

nsob.put server key value

Argument
Description

server
String. The name of the sob server.

key
String. The file name or key of the data.

value
String. The data to be put.

Result
Description

NULL
Success

TCL_ERROR
Failure. An error occurred. See the server log for more information.

--------------------------------------------------------------------------------

nsob.append

Used to append data on the server. If sendflush is enabled (default), a ncf message will be sent to all clients.

nsob.append server key value

Argument
Description

server
String. The name of the sob server.

key
String. The file name or key of the data.

value
String. The data to be appended.

Result
Description

NULL
Success

TCL_ERROR
Failure. An error occurred. See the server log for more information.

--------------------------------------------------------------------------------

nsob.get

Used to fetch data from the server. If caching is enabled (default), the API will fetch from cache if exists, and make a cache entry if it does not.

nsob.get server key

Argument
Description

server
String. The name of the sob server.

key
String. The file name or key of the data.

Result
Description

STRING
Success. The contents of the file.

NULL
Success. The communication was successful, but there was no such key.

TCL_ERROR
Failure. An error occurred. See the server log for more information.

--------------------------------------------------------------------------------

nsob.delete

Used to remove data from the server. If sendflush is enabled (default), a ncf message will be sent to all clients.

nsob.delete server key

Argument
Description

server
String. The name of the sob server.

key
String. The file name or key of the data.

Result
Description

NULL
Success. The file has been deleted.

TCL_ERROR
Failure. An error occurred. See the server log for more information.

--------------------------------------------------------------------------------

nsob.names

Used to list the names of the configured sobs. Both clients and servers are listed.

nsob.names

Result
Description

String
Success. The names of the configured sobs in TCL_LIST format.

TCL_ERROR
Failure. An error occurred. See the server log for more information.

--------------------------------------------------------------------------------

nsob.debug

Used to toggle debug mode. Debug mode adds log messages for many nsob commands.

nsob.debug ?boolean?

Argument
Description

?boolean?
Boolean. Optional. Specifies whether or not debugging is enabled.

Result
Description

1
Success. Returned if a boolean was specified.

BOOLEAN
Success. If a boolean was not specified, then the current debug value is returned.

--------------------------------------------------------------------------------

nsob.copy

Used to copy the contents of a local file to the borker. If sendflush is enabled (default), a ncf message will be sent to all clients.

nsob.copy localFile server key

Argument
Description

localFile
String. The complete file path to the file.

server
String. The name of the sob server.

key
String. The file name or key of the data.

Result
Description

NULL
Success. The file was copied to the server.

TCL_ERROR
Failure. An error occurred. See the server log for more information.

Configuration

The bundled configuration has a single AOLserver instance configured with more than one nsob server. You could easily break out each nsob server to its own AOLserver instance. Below is a simple configuration that creates a nsob server called "sob".

Server:

    ns_section "ns/server/$server/modules"
        ns_param nssock nssock.so
        ns_param dci dci.so

    ns_section "ns/server/$server/module/nssock"
        ns_param hostname $hostName
        ns_param address $address
        ns_param port $httpPort

    ns_section "ns/server/$server/module/dci/rpc/server/nsobc:sob"
        ns_param http 1

    ns_section "ns/server/$server/module/dci/rpc/server/nsobc:sob/acl"
        ns_paran allow 127.0.0.1

    ns_section "ns/server/$server/module/dci/sob"
        ns_param debug 1

    ns_section "ns/server/$server/module/dci/sob/servers"
        ns_param sob sob

    ns_section "ns/server/$server/module/dci/sob/server/sob"
        ns_param root $sobRoot
        ns_param mkdirs 1
        ns_param rename 1
        ns_param statsdetail 1

    ns_section "ns/server/$server/module/dci/sob/server/sob/clients"
        # This section has no params but is required.
        # Legacy client list before HTTP RPC.
        # See the rpc/server acl section above.

Client:

    ns_section "ns/server/$server/modules"
        ns_param dci dci.so

    ns_section "ns/server/$server/module/dci/rpc"
        ns_param debug 1
        ns_param address $address
        ns_param port $rpcPort

    ns_section "ns/server/$server/module/dci/rpc/client/nsobc:sob"
        ns_param address $sobHostAddress
        ns_param port $sobHostHttpPort 
        ns_param httpkeepalive true
        ns_param httpnumconnections 1

    ns_section "ns/server/$server/module/dci/sob"
        ns_param debug 1

    ns_section "ns/server/$server/module/dci/sob/clients"
        ns_param sob sob

    ns_section "ns/server/$server/module/dci/sob/client/sob"
        ns_param timeout 1
        ns_param flushOnWrite 1 ; # Default. See Best Practices.

Usage

Any client can "put" data on the server. Use the tool server's Control Port to send some data to the sob server (See Topology for more information):

    tool:nscp 1> nsob.put sob mySobFile "my sob data"

Any client can "get" data from the server. Use the frontend's Control Port to request data from the sob server (See Topology for more information):

    frontend:nscp 1> nsob.get sob mySobFile
    my sob data

Caching and Network Cache Flush

To optimize performance, nsob has the ability to cache at both the server and client. With caching enabled (default), the initial client request first looks into its own cache. If no entry is found it will make a call to the server. If the server has caching enabled (default), it will first look in its cache. If no entry is found, it will read from disk, make a cache entry, and return the data. The client API will make a cache entry and return the data.

Network Cache Flush (ncf) is another service availble in nsdci. With the sobs configured to send cache flush messages (default), the remote client cache will be flushed when a sob entry is addded or changed. Note: You must configure ncf on the AOLserver instance hosting the nsob server in order to send cache flush messages.

There are significant performance gains from caching. Consider a fetch to "file.xml" which is 8KB:

    tool:nscp 1> time {nsob.get sob file.xml}
    555 microseconds per iteration

    tool:nscp 2> time {nsob.get sob file.xml} 100
    79.08 microseconds per iteration

If dubugging is turned on, you will see the following log entries in the tool.server.log file:

    ...[-nscp:0-] Notice: sob: sob: get file.xml - ok
    ...[-nscp:0-] Notice: sob: sob: get file.xml - ok (cached)

The first entry shows that the data was fetched from the server, the second shows the data was retrieved from cache. Similar notices can be seen on the server in the sob.server.log file:

    ...[-conn:0-] Notice: read: file.xml
    ...[-conn:0-] Notice: read: file.xml (cached)

Best Practices

Caching should be used where possible to optimize performance. The AOLserver Stats interface has insight to cache hit-rate information and should be used to measure the performance of the nsob cache. A high cache hit-rate is preferred.

You might find that flowing content one way per server gives better performance. For example, one server brokering data from the tool server to the frontend, and a second from the frontend to the tool server. This could perform better than one nsob server doing both.

When debugging, always check logs on both the client and server. If nsob.put fails, there might be insight in the sob server's server log.

When writing from a client that receives ncf messages, you should turn off the flushOnWrite param in the client config. This will cause the client to write to the server without removing its cache entry allowing the ncf message to remove it instead. Useful if the server is set up to send ncf messages.

Recent changes to nsob

nsob modified by Anonymous

Networked Small Object Broker (nsob)

Introduction

TCL API

nsob.put

nsob.append

nsob.get

nsob.delete

nsob.names

nsob.debug

nsob.copy

Configuration

Server:

Client:

Usage

Caching and Network Cache Flush

Best Practices