[njbfs-bugs] insmod problems

[<sq...@sq...>]

(squeegy:/home/chiodi/njbfs)--> insmod njbfs
Using /lib/modules/2.4.20-9/kernel/fs/njbfs/njbfs.o
/lib/modules/2.4.20-9/kernel/fs/njbfs/njbfs.o: init_module: Operation not permitted
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
      You may find more information in syslog or the output from dmesg


(squeegy:/home/chiodi/njbfs)--> dmesg
Linux version 2.4.20-9 (bhc...@po...) (gcc version 3.2.2 20030313 (Red Hat Linux 3.2.2-10)) #1 Wed Apr 2 13:24:44 EST 2003
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
512MB LOWMEM available.
On node 0 totalpages: 131072
zone(0): 4096 pages.
zone(1): 126976 pages.
zone(2): 0 pages.
Kernel command line: ro root=LABEL=/
Initializing CPU#0
Detected 1400.081 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 2791.83 BogoMIPS
Memory: 511360k/524288k available (1313k kernel code, 10368k reserved, 996k data, 128k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0183f9ff c1c7f9ff 00000000 00000000
CPU:             Common caps: 0183f9ff c1c7f9ff 00000000 00000000
CPU: AMD Athlon(tm) processor stepping 04
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rg...@at...)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfb4f0, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router VIA [1106/0686] at 00:07.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
Detected PS/2 Mouse Port.
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS0 at 0x03f8 (irq = 4) is a 16550A
Real Time Clock Driver v1.10e
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 00:07.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:07.1
    ide0: BM-DMA at 0xd400-0xd407, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xd408-0xd40f, BIOS settings: hdc:DMA, hdd:pio
hda: Maxtor 91303D6, ATA DISK drive
hdb: Maxtor 86480D6, ATA DISK drive
blk: queue c03be900, I/O limit 4095Mb (mask 0xffffffff)
blk: queue c03bea44, I/O limit 4095Mb (mask 0xffffffff)
hdc: CD-ROM 56X L, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: host protected area => 1
hda: 25450992 sectors (13031 MB) w/512KiB Cache, CHS=25249/16/63, UDMA(33)
hdb: host protected area => 1
hdb: 12658776 sectors (6481 MB) w/256KiB Cache, CHS=13395/15/63, UDMA(33)
ide-floppy driver 0.99.newide
Partition check:
 hda: hda1 hda2 hda3 hda4 < hda5 >
 hdb: hdb1 hdb2
ide-floppy driver 0.99.newide
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 131072 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 250k freed
VFS: Mounted root (ext2 filesystem).
SCSI subsystem driver Revision: 1.00
ohci1394: $Rev: 693 $ Ben Collins <bco...@de...>
PCI: Found IRQ 12 for device 00:0a.0
ohci1394_0: OHCI-1394 1.0 (PCI): IRQ=[12]  MMIO=[ea005000-ea0057ff]  Max Packet=[2048]
ieee1394: SelfID completion called outside of bus reset!
ieee1394: Host added: Node[00:1023]  GUID[005062560000099b]  [Linux OHCI-1394]
ieee1394: NodeMgr: hotplug policy returned -2
ieee1394: Device added: Node[01:1023]  GUID[00063a0240000000]  [DMI     ]
ieee1394: sbp2: Node 01:1023: Using 36byte inquiry workaround
ieee1394: sbp2: Logged into SBP-2 device
ieee1394: sbp2: Node[01:1023]: Max speed [S400] - Max payload [2048]
scsi0 : IEEE-1394 SBP-2 protocol driver (host: ohci1394)
$Rev: 707 $ James Goodwin <ja...@fi...>
SBP-2 module load options:
- Max speed supported: S400
- Max sectors per I/O supported: 255
- Max outstanding commands supported: 64
- Max outstanding commands per lun supported: 1
- Serialized I/O (debug): no
- Exclusive login: yes
  Vendor: GENERIC   Model: CRD-BP1500P       Rev: 6z34
  Type:   CD-ROM                             ANSI SCSI revision: 02
Journalled Block Device driver loaded
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 128k freed
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 13:29:01 Apr  2 2003
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 10 for device 00:07.2
PCI: Sharing IRQ 10 with 00:07.3
PCI: Sharing IRQ 10 with 00:0b.0
usb-uhci.c: USB UHCI at I/O 0xd800, IRQ 10
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 10 for device 00:07.3
PCI: Sharing IRQ 10 with 00:07.2
PCI: Sharing IRQ 10 with 00:0b.0
usb-uhci.c: USB UHCI at I/O 0xdc00, IRQ 10
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vo...@su...>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
hub.c: new USB device 00:07.2-2, assigned address 2
input0: USB HID v1.00 Mouse [Logitech USB-PS/2 Trackball] on usb1:2.0
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,3), internal journal
Adding Swap: 524120k swap-space (priority -1)
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,65), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,66), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport_pc: Via 686A parallel port: io=0x378
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (4096 buckets, 32768 max) - 292 bytes per conntrack
8139too Fast Ethernet driver 0.9.26
PCI: Found IRQ 11 for device 00:09.0
PCI: Sharing IRQ 11 with 01:05.0
divert: allocating divert_blk for eth0
eth0: RealTek RTL8139 Fast Ethernet at 0xe0933000, 00:40:95:30:4a:91, IRQ 11
eth0:  Identified 8139 chip type 'RTL-8139C'
eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability 45e1.martian source 255.255.255.255 from 192.168.1.1, on dev eth0
ll header: ff:ff:ff:ff:ff:ff:00:06:25:60:e9:b4:08:00
Loading 1.2 (16[1] devices)...
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport_pc: Via 686A parallel port: io=0x378
lp0: using parport0 (polling).
lp0: console ready
0: nvidia: loading NVIDIA Linux x86 nvidia.o Kernel Module  1.0-4349  Thu Mar 27 19:00:02 PST 2003
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 440M
agpgart: Detected AMD 761 chipset
agpgart: AGP aperture is 128M @ 0xd0000000
hub.c: new USB device 00:07.2-1, assigned address 3
usb.c: USB device 3 (vend/prod 0x471/0x222) is not claimed by any active driver.ide-floppy driver 0.99.newide
hdc: ATAPI 56X CD-ROM drive, 128kB Cache, UDMA(33)
cdrom: This disc doesn't have any tracks I recognize!
cdrom: This disc doesn't have any tracks I recognize!
es1370: version v0.38 time 13:29:36 Apr  2 2003
PCI: Found IRQ 10 for device 00:0b.0
PCI: Sharing IRQ 10 with 00:07.2
PCI: Sharing IRQ 10 with 00:07.3
es1370: found adapter at io 0xe400 irq 10
es1370: features: joystick off, line in, mic impedance 0
Device not ready.  Make sure there is a disc in the drive.
Device not ready.  Make sure there is a disc in the drive.
Device not ready.  Make sure there is a disc in the drive.
Device not ready.  Make sure there is a disc in the drive.
udf: registering filesystem
UDF-fs DEBUG lowlevel.c:57:udf_get_last_session: XA disk: no, vol_desc_start=0
UDF-fs DEBUG super.c:1421:udf_read_super: Multi-session=0
UDF-fs DEBUG super.c:410:udf_vrs: Starting at sector 16 (2048 byte sectors)
UDF-fs DEBUG super.c:437:udf_vrs: ISO9660 Primary Volume Descriptor found
UDF-fs DEBUG super.c:446:udf_vrs: ISO9660 Volume Descriptor Set Terminator foundUDF-fs: No VRS found
ISO 9660 Extensions: RRIP_1991A
usb.c: USB disconnect on device 00:07.2-1 address 3
ATAPI device hdc:
  Error: Illegal request -- (Sense key=0x05)
  Illegal mode for this track or incompatible medium -- (asc=0x64, ascq=0x00)
  The failed "Test Unit Ready" packet command was:
  "00 00 00 00 00 00 00 00 00 00 00 00 "
hub.c: new USB device 00:07.2-1, assigned address 4
usb.c: USB device 4 (vend/prod 0x471/0x222) is not claimed by any active driver.usb.c: USB disconnect on device 00:07.2-1 address 4
hub.c: new USB device 00:07.2-1, assigned address 5
usb.c: USB device 5 (vend/prod 0x471/0x222) is not claimed by any active driver.usb.c: USB disconnect on device 00:07.2-1 address 5
usb.c: error registering nomad driver
hub.c: new USB device 00:07.2-1, assigned address 6
usb.c: USB device 6 (vend/prod 0x471/0x222) is not claimed by any active driver.usb.c: error registering nomad driver
usb.c: error registering nomad driver
usb.c: error registering nomad driver
usb.c: error registering nomad driver
(squeegy:/home/chiodi/njbfs)-->

tail /var/log/messages

Apr 26 00:44:01 squeegy automount[23740]: starting automounter version 3.1.7, path = /import, maptype = file, mapname = /etc/auto.import
Apr 26 00:44:01 squeegy automount[23747]: starting automounter version 3.1.7, path = /mnt/njbfs, maptype = program, mapname = /etc/auto.njb
Apr 26 00:44:01 squeegy autofs: automount startup succeeded
Apr 26 00:44:01 squeegy automount[23740]: using kernel protocol version 3
Apr 26 00:44:01 squeegy automount[23747]: using kernel protocol version 3
Apr 26 00:44:01 squeegy automount[23740]: attempting to mount entry /import/homeApr 26 00:44:01 squeegy automount[23740]: attempting to mount entry /import/xmg
Apr 26 00:44:49 squeegy kernel: usb.c: error registering nomad driver
Apr 26 00:45:49 squeegy kernel: hub.c: new USB device 00:07.2-1, assigned address 6
Apr 26 00:45:49 squeegy kernel: usb.c: USB device 6 (vend/prod 0x471/0x222) is not claimed by any active driver.
Apr 26 00:45:52 squeegy /etc/hotplug/usb.agent: Setup njbfs for USB product 471/222/100
Apr 26 00:45:52 squeegy kernel: usb.c: error registering nomad driver
Apr 26 00:45:52 squeegy insmod: /lib/modules/2.4.20-9/kernel/fs/njbfs/njbfs.o: init_module: Operation not permitted
Apr 26 00:45:52 squeegy insmod: Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.       You may find more information in syslog or the output from dmesg
Apr 26 00:45:52 squeegy insmod: /lib/modules/2.4.20-9/kernel/fs/njbfs/njbfs.o: insmod /lib/modules/2.4.20-9/kernel/fs/njbfs/njbfs.o failed
Apr 26 00:45:52 squeegy insmod: /lib/modules/2.4.20-9/kernel/fs/njbfs/njbfs.o: insmod njbfs failed
Apr 26 00:45:52 squeegy /etc/hotplug/usb.agent: ... can't load module njbfs
Apr 26 00:45:52 squeegy /etc/hotplug/usb.agent: missing kernel or user mode driver njbfs
Apr 26 00:45:52 squeegy /etc/hotplug/usb.agent: Setup nomadjukebox for USB product 471/222/100
Apr 26 00:45:52 squeegy /etc/hotplug/usb.agent: Module setup nomadjukebox for USB product 471/222/100
Apr 26 00:45:52 squeegy devlabel: devlabel service started/restarted
Apr 26 00:45:52 squeegy kernel: usb.c: error registering nomad driver
Apr 26 00:46:33 squeegy kernel: usb.c: error registering nomad driver
Apr 26 00:47:30 squeegy gconfd (chiodi-24366): starting (version 2.2.0), pid 24366 user 'chiodi'
Apr 26 00:47:30 squeegy gconfd (chiodi-24366): Failed to load source "xml:readwrite:/home/chiodi/.gconf": Failed to lock '/home/chiodi/.gconf/%gconf-xml-backend.lock/ior': probably another process has the lock, or your operating system has
NFS file locking misconfigured (Resource temporarily unavailable)
Apr 26 00:47:30 squeegy gconfd (chiodi-24366): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only config source at position 0
Apr 26 00:47:30 squeegy gconfd (chiodi-24366): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only config source at position 1
Apr 26 00:47:30 squeegy gconfd (chiodi-24366): None of the resolved addresses are writable; saving configuration settings will not be possible
Apr 26 00:47:30 squeegy gconfd (chiodi-24366): No writable config sources successfully resolved, may not be able to save some configuration changes
Apr 26 00:48:28 squeegy kernel: usb.c: error registering nomad driver
Apr 26 00:49:30 squeegy gconfd (chiodi-24366): GConf server is not in use, shutting down.
Apr 26 00:49:30 squeegy gconfd (chiodi-24366): Exiting
Apr 26 00:51:00 squeegy kernel: usb.c: USB disconnect on device 00:07.2-1 address 6
Apr 26 00:51:00 squeegy devlabel: devlabel service started/restarted
Apr 26 00:52:11 squeegy automount[24943]: expired /import/home
Apr 26 00:52:11 squeegy automount[24943]: expired /import/xmg
Apr 26 00:52:12 squeegy automount[23740]: attempting to mount entry /import/homeApr 26 00:52:12 squeegy automount[23740]: attempting to mount entry /import/xmg