[njbfs-devel] Jukebox 2?

[Ken M. <km...@ma...>]

I just got a 10GB Nomad "Jukebox 2" which I'm trying to use with
the 0.2.1 njbfs driver.

I'm running on Redhat 8.0 with a 2.4.18 kernel and hotplug for usb.

When I plug in the drive the log shows

Dec 19 10:11:41 kmlinux kernel: hub.c: USB new device connect on bus1/2, 
assigned device number 2
Dec 19 10:11:41 kmlinux kernel: usb.c: USB device 2 (vend/prod 
0x41e/0x4100) is not claimed by any active driver.
Dec 19 10:11:45 kmlinux /etc/hotplug/usb.agent: Setup njbfs for USB 
product 41e/4100/1
Dec 19 10:11:45 kmlinux kernel: usb.c: registered new driver nomad
Dec 19 10:11:45 kmlinux kernel: nomad.c: USB Creative Nomad II/Jukebox 
support registered.
Dec 19 10:11:45 kmlinux kernel: driver.c: /proc/njb created
Dec 19 10:11:45 kmlinux kernel: driver.c: /proc/njb/driver created

and  cat /proc/njb/driver shows

Nomad Jukebox Driver Status
---------------------------
NJB File System Version : 0.1
Connected : No

A mount attempt yields

Dec 19 10:12:41 kmlinux kernel: njb_usb.c: check: jukebox not connected
Dec 19 10:12:41 kmlinux kernel: inode.c: could not connect


Is the problem that this is a "Jukebox 2" and not the older "1", or am I
running into a Linux issue with Redhat?

Any suggestions?

Ken Mandelberg      | km...@ma...
Emory University    |
Dept of Math and CS | Phone: Voice (404) 727-7963
Atlanta, GA 30322   |        FAX 727-5611