[e995bb]: cisco / CISCO-INTERFACETOPN-EXT-MIB.my  Maximize  Restore  History

Download this file

359 lines (294 with data), 12.7 kB

-- *****************************************************************
-- CISCO-INTERFACETOPN-EXT-MIB
--   
-- July 2005, Lilian Jiang
--   
-- Copyright (c) 2005, 2010 by Cisco Systems Inc.
-- All rights reserved.
-- *****************************************************************

CISCO-INTERFACETOPN-EXT-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY,
    OBJECT-TYPE
        FROM SNMPv2-SMI
    MODULE-COMPLIANCE,
    OBJECT-GROUP
        FROM SNMPv2-CONF
    ciscoMgmt
        FROM CISCO-SMI
    interfaceTopNControlEntry
        FROM INTERFACETOPN-MIB
    VlanIndex
        FROM Q-BRIDGE-MIB;


ciscoInterfaceTopNExtMIB MODULE-IDENTITY
    LAST-UPDATED    "201010190000Z"
    ORGANIZATION    "Cisco Systems, Inc."
    CONTACT-INFO
            "Cisco Systems
            Customer Service

            Postal: 170 W Tasman Drive
            San Jose, CA  95134
            USA

            Tel: +1 800 553-NETS

            E-mail: cs-lan-switch-snmp@cisco.com"
    DESCRIPTION
        "This MIB module is an extension to INTERFACETOPN-MIB.
        It provides additional management information for
        sorting device interfaces."
    REVISION        "201010190000Z"
    DESCRIPTION
        "Add fortyGigaEthernet
        in citneInterfaceTopNInterfaceType"
    REVISION        "200801150000Z"
    DESCRIPTION
        "Modified the object descriptions of
        citneInterfaceTopNCounterType,
        citneInterfaceTopNInterfaceType 
        and citneInterfaceTopNVlanNumber."
    REVISION        "200603150000Z"
    DESCRIPTION
        "Initial version of this MIB module."
    ::= { ciscoMgmt 482 }


ciscoInterfaceTopNExtMIBNotifs  OBJECT IDENTIFIER
    ::= { ciscoInterfaceTopNExtMIB 0 }

ciscoInterfaceTopNExtMIBObjects  OBJECT IDENTIFIER
    ::= { ciscoInterfaceTopNExtMIB 1 }

ciscoInterfaceTopNExtMIBConform  OBJECT IDENTIFIER
    ::= { ciscoInterfaceTopNExtMIB 2 }


-- Interface Top N capability

citneInterfaceTopNCaps OBJECT-TYPE
    SYNTAX          BITS {
                        utilization(0),
                        bytes(1),
                        packets(2),
                        broadcast(3),
                        multicast(4),
                        overflow(5)
                    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The type of interface counters the system is capable to
        do sorting on, as an extension to the interfaceTopNCaps 
        defined in INTERFACETOPN-MIB. 

        utilization --  The interface bandwidth utilization in 
                        32-bit version. The utilization on 
                        ethernet interface is computed in the 
                        following methods:

          Ethernet utilization: (for full duplex interface, 
                                 divide by 2)

          10 Mbps         I/O-pkts * (9.6 + 6.4) + (0.8 * I/O-Bytes)
          Ethernet Util = -----------------------------------------
                          Interval * 10,000

                          where 9.6 is interframe gap of Ethernet
                          6.4 is preamble of Ethernet
                          10,000 is 10Mbps

          100 Mbps        I/O-pkts * (96 + 64) + (8 * I/O-Bytes)
          Ethernet Util = --------------------------------------
                          Interval * 1,000,000

          1000 Mbps       I/O-pkts * (96 + 64) + (8 * I/O-Bytes)
          Ethernet Util = --------------------------------------
                          Interval * 10,000,000

          10000Mbps       I/O-pkts * (96 + 64) + (8 * I/O-Bytes)
          Ethernet Util = --------------------------------------
                          Interval * 100,000,000

          All other       I/O-pkts * (9.6 + 6.4) + (0.8 * I/O-Bytes)
          Ethernet Util = ------------------------------------------
                          Interval * N * 1,000
                          (where N is N Mbps)

        bytes -- the total number of bytes received and transmitted 
                 on the interface in 64-bit version.  

        packets -- the total number of packets received and 
                 transmitted on  the interface in 64-bit version.

        broadcast -- the total number of broadcast packets received 
                 and transmitted on the interface in 64-bit version.

        multicast -- the total number of multicast packets received 
                 and transmitted on the interface in 64-bit version.

        overflow -- the total number of transmitted buffer overflow 
                 errors on the interface in 32-bit version." 
    ::= { ciscoInterfaceTopNExtMIBObjects 1 }
-- Interface Top N Control Table

citneInterfaceTopNControlTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CitneInterfaceTopNControlEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "A table providing supplemental parameter information
        for interfaceTopNControlTable as defined in 
        INTERFACETOPN-MIB."
    ::= { ciscoInterfaceTopNExtMIBObjects 2 }

citneInterfaceTopNControlEntry OBJECT-TYPE
    SYNTAX          CitneInterfaceTopNControlEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "An entry providing supplemental parameter information
        that control the creation of a report of the top 
        N ports according to several metrics."
    AUGMENTS           { interfaceTopNControlEntry  } 
    ::= { citneInterfaceTopNControlTable 1 }

CitneInterfaceTopNControlEntry ::= SEQUENCE {
        citneInterfaceTopNCounterType   INTEGER,
        citneInterfaceTopNInterfaceType INTEGER,
        citneInterfaceTopNVlanNumber    VlanIndex
}

citneInterfaceTopNCounterType OBJECT-TYPE
    SYNTAX          INTEGER  {
                        none(1),
                        utilization(2),
                        bytes(3),
                        packets(4),
                        broadcast(5),
                        multicast(6),
                        overflow(7)
                    }
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "The particular counter type to be sampled, as
        an extension to the interfaceTopNObjectVariable
        defined in INTERFACETOPN-MIB.

        Setting this object to the value of 'none' indicates
        that the TopN sampling is based on the counter type 
        as specified by the corresponding 
        interfaceTopNObjectVariable for the same entry
        in interfaceTopNControlTable; Setting this object 
        to a value other than 'none' indicates that the 
        TopN sampling is based on the counter type as 
        specified by this object instead of the 
        counter type as specified by the 
        corresponding interfaceTopNObjectVariable for 
        the same entry in interfaceTopNControlTable.    

        For entries in the interfaceTopNTable in the 
        INTERFACETOPN-MIB reported for counter type as specified 
        by this citneInterfaceTopNCounterType: 
        (1) The corresponding interfaceTopNDataSourceIndex will 
            point to the ifIndex of the sorted interfaces; 
        (2) If the sampled counter type is one of the following
            32 bit counters: 
                   'utilization',
                   'overflow', 
            the interfaceTopNValue object is used in 
            the corresponding entries in interfaceTopNTable.

            If the sampled counter type is one of the following
            64 bit counters: 
                   'bytes', 
                   'packets',
                   'broadcast',
                   'multicast',
            the interfaceTopNValue64 object is used 
            in the corresponding entries in interfaceTopNTable. 

        This object may not be modified if the associated
        interfaceTopNRowStatus object is equal to 'active'."
    DEFVAL          { none } 
    ::= { citneInterfaceTopNControlEntry 1 }

citneInterfaceTopNInterfaceType OBJECT-TYPE
    SYNTAX          INTEGER  {
                        all(1),
                        ethernet(2),
                        fastEthernet(3),
                        gigaEthernet(4),
                        tenGigaEthernet(5),
                        portChannel(6),
                        layer2(7),
                        layer3(8),
                        fortyGigaEthernet(9)
                    }
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "Specifies the interface type for the TopN sampling.

        all -- all applicable interfaces in the system.

        ethernet -- all Ethernet interfaces in the system.        

        fastEthernet -- all FastEthernet interfaces in the system.

        gigaEthernet -- all GigabitEthernet interfaces in the 
                        system. 

        tenGigaEthernet -- all TenGigabitEthernet interfaces 
                           in the system.

        portChannel -- all Port-channel interfaces in the system. 

        layer2 -- all layer-2 interfaces in the system. 

        layer3 -- all layer-3 interfaces in the system.  

        fortyGigaEthernet -- all FortyGigabitEthernet interfaces 
                           in the system.

        This object may not be modified if the associated
        interfaceTopNRowStatus object is equal to 'active'."
    DEFVAL          { all } 
    ::= { citneInterfaceTopNControlEntry 2 }

citneInterfaceTopNVlanNumber OBJECT-TYPE
    SYNTAX          VlanIndex
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "Specifies the Vlan number for the layer-2 interfaces when
        the object value of citneInterfaceTopNInterfaceType 
        for the same entry is 'layer2'. If the object value
        of citneInterfaceTopNVlanNumber is other than zero and 
        the corresponding citneInterfaceTopNInterfaceType is 
        'layer2' for the same entry, then it indicates all 
        layer-2 interfaces in that VLAN is sampled.  If the 
        object value of citneInterfaceTopNVlanNumber is zero 
        and the corresponding citneInterfaceTopNInterfaceType 
        is 'layer2' for the same entry, then it indicates all 
        layer-2 interfaces in the system regardless of their 
        Vlan number is sampled. If the object value of 
        citneInterfaceTopNInterfaceType is other than 
        'layer2', then citneInterfaceTopNVlanNumber has to take
        the value of 0.

        This object may not be modified if the associated
        interfaceTopNRowStatus object is equal to 'active'."
    DEFVAL          { 0 } 
    ::= { citneInterfaceTopNControlEntry 3 }
 

-- Notifications
-- (none defined)
--   
-- Conformance

ciscoIfTopNExtMIBCompliances  OBJECT IDENTIFIER
    ::= { ciscoInterfaceTopNExtMIBConform 1 }

ciscoIfTopNExtMIBGroups  OBJECT IDENTIFIER
    ::= { ciscoInterfaceTopNExtMIBConform 2 }


ciscoIfTopNExtMIBCompliance MODULE-COMPLIANCE
    STATUS          current
    DESCRIPTION
        "Describes the requirements for conformance to the
        Cisco InterfaceTopN Extention MIB."
    MODULE          -- this module
    MANDATORY-GROUPS { ciscoIfTopNExtCapsGroup }

    GROUP           ciscoIfTopNExtControlGroup
    DESCRIPTION
        "This group is mandatory for systems which support
        the supplemental parameters for the 
        interfaceTopNControlTable."

    GROUP           ciscoIfTopNExtCtrlVlanGroup
    DESCRIPTION
        "This group is mandatory for systems which support
        the supplemental vlan parameters for the 
        interfaceTopNControlTable."
    ::= { ciscoIfTopNExtMIBCompliances 1 }

-- Units of Conformance

ciscoIfTopNExtCapsGroup OBJECT-GROUP
    OBJECTS         { citneInterfaceTopNCaps }
    STATUS          current
    DESCRIPTION
        "A collection of objects providing capability information
        about supplemental counter type supported by the system."
    ::= { ciscoIfTopNExtMIBGroups 1 }

ciscoIfTopNExtControlGroup OBJECT-GROUP
    OBJECTS         {
                        citneInterfaceTopNCounterType,
                        citneInterfaceTopNInterfaceType
                    }
    STATUS          current
    DESCRIPTION
        "A collection of objects providing information about
        supplemental parameters for the 
        interfaceTopNControlTable."
    ::= { ciscoIfTopNExtMIBGroups 2 }

ciscoIfTopNExtCtrlVlanGroup OBJECT-GROUP
    OBJECTS         { citneInterfaceTopNVlanNumber }
    STATUS          current
    DESCRIPTION
        "A collection of objects providing information about
        supplemental vlan parameters for the
        interfaceTopNControlTable."
    ::= { ciscoIfTopNExtMIBGroups 3 }

END



Get latest updates about Open Source Projects, Conferences and News.

Sign up for the SourceForge newsletter:





No, thanks