[63b0cc]: avaya / 96xxmib31.txt  Maximize  Restore  History

Download this file

1973 lines (1951 with data), 102.1 kB

   1
   2
   3
   4
   5
   6
   7
   8
   9
  10
  11
  12
  13
  14
  15
  16
  17
  18
  19
  20
  21
  22
  23
  24
  25
  26
  27
  28
  29
  30
  31
  32
  33
  34
  35
  36
  37
  38
  39
  40
  41
  42
  43
  44
  45
  46
  47
  48
  49
  50
  51
  52
  53
  54
  55
  56
  57
  58
  59
  60
  61
  62
  63
  64
  65
  66
  67
  68
  69
  70
  71
  72
  73
  74
  75
  76
  77
  78
  79
  80
  81
  82
  83
  84
  85
  86
  87
  88
  89
  90
  91
  92
  93
  94
  95
  96
  97
  98
  99
 100
 101
 102
 103
 104
 105
 106
 107
 108
 109
 110
 111
 112
 113
 114
 115
 116
 117
 118
 119
 120
 121
 122
 123
 124
 125
 126
 127
 128
 129
 130
 131
 132
 133
 134
 135
 136
 137
 138
 139
 140
 141
 142
 143
 144
 145
 146
 147
 148
 149
 150
 151
 152
 153
 154
 155
 156
 157
 158
 159
 160
 161
 162
 163
 164
 165
 166
 167
 168
 169
 170
 171
 172
 173
 174
 175
 176
 177
 178
 179
 180
 181
 182
 183
 184
 185
 186
 187
 188
 189
 190
 191
 192
 193
 194
 195
 196
 197
 198
 199
 200
 201
 202
 203
 204
 205
 206
 207
 208
 209
 210
 211
 212
 213
 214
 215
 216
 217
 218
 219
 220
 221
 222
 223
 224
 225
 226
 227
 228
 229
 230
 231
 232
 233
 234
 235
 236
 237
 238
 239
 240
 241
 242
 243
 244
 245
 246
 247
 248
 249
 250
 251
 252
 253
 254
 255
 256
 257
 258
 259
 260
 261
 262
 263
 264
 265
 266
 267
 268
 269
 270
 271
 272
 273
 274
 275
 276
 277
 278
 279
 280
 281
 282
 283
 284
 285
 286
 287
 288
 289
 290
 291
 292
 293
 294
 295
 296
 297
 298
 299
 300
 301
 302
 303
 304
 305
 306
 307
 308
 309
 310
 311
 312
 313
 314
 315
 316
 317
 318
 319
 320
 321
 322
 323
 324
 325
 326
 327
 328
 329
 330
 331
 332
 333
 334
 335
 336
 337
 338
 339
 340
 341
 342
 343
 344
 345
 346
 347
 348
 349
 350
 351
 352
 353
 354
 355
 356
 357
 358
 359
 360
 361
 362
 363
 364
 365
 366
 367
 368
 369
 370
 371
 372
 373
 374
 375
 376
 377
 378
 379
 380
 381
 382
 383
 384
 385
 386
 387
 388
 389
 390
 391
 392
 393
 394
 395
 396
 397
 398
 399
 400
 401
 402
 403
 404
 405
 406
 407
 408
 409
 410
 411
 412
 413
 414
 415
 416
 417
 418
 419
 420
 421
 422
 423
 424
 425
 426
 427
 428
 429
 430
 431
 432
 433
 434
 435
 436
 437
 438
 439
 440
 441
 442
 443
 444
 445
 446
 447
 448
 449
 450
 451
 452
 453
 454
 455
 456
 457
 458
 459
 460
 461
 462
 463
 464
 465
 466
 467
 468
 469
 470
 471
 472
 473
 474
 475
 476
 477
 478
 479
 480
 481
 482
 483
 484
 485
 486
 487
 488
 489
 490
 491
 492
 493
 494
 495
 496
 497
 498
 499
 500
 501
 502
 503
 504
 505
 506
 507
 508
 509
 510
 511
 512
 513
 514
 515
 516
 517
 518
 519
 520
 521
 522
 523
 524
 525
 526
 527
 528
 529
 530
 531
 532
 533
 534
 535
 536
 537
 538
 539
 540
 541
 542
 543
 544
 545
 546
 547
 548
 549
 550
 551
 552
 553
 554
 555
 556
 557
 558
 559
 560
 561
 562
 563
 564
 565
 566
 567
 568
 569
 570
 571
 572
 573
 574
 575
 576
 577
 578
 579
 580
 581
 582
 583
 584
 585
 586
 587
 588
 589
 590
 591
 592
 593
 594
 595
 596
 597
 598
 599
 600
 601
 602
 603
 604
 605
 606
 607
 608
 609
 610
 611
 612
 613
 614
 615
 616
 617
 618
 619
 620
 621
 622
 623
 624
 625
 626
 627
 628
 629
 630
 631
 632
 633
 634
 635
 636
 637
 638
 639
 640
 641
 642
 643
 644
 645
 646
 647
 648
 649
 650
 651
 652
 653
 654
 655
 656
 657
 658
 659
 660
 661
 662
 663
 664
 665
 666
 667
 668
 669
 670
 671
 672
 673
 674
 675
 676
 677
 678
 679
 680
 681
 682
 683
 684
 685
 686
 687
 688
 689
 690
 691
 692
 693
 694
 695
 696
 697
 698
 699
 700
 701
 702
 703
 704
 705
 706
 707
 708
 709
 710
 711
 712
 713
 714
 715
 716
 717
 718
 719
 720
 721
 722
 723
 724
 725
 726
 727
 728
 729
 730
 731
 732
 733
 734
 735
 736
 737
 738
 739
 740
 741
 742
 743
 744
 745
 746
 747
 748
 749
 750
 751
 752
 753
 754
 755
 756
 757
 758
 759
 760
 761
 762
 763
 764
 765
 766
 767
 768
 769
 770
 771
 772
 773
 774
 775
 776
 777
 778
 779
 780
 781
 782
 783
 784
 785
 786
 787
 788
 789
 790
 791
 792
 793
 794
 795
 796
 797
 798
 799
 800
 801
 802
 803
 804
 805
 806
 807
 808
 809
 810
 811
 812
 813
 814
 815
 816
 817
 818
 819
 820
 821
 822
 823
 824
 825
 826
 827
 828
 829
 830
 831
 832
 833
 834
 835
 836
 837
 838
 839
 840
 841
 842
 843
 844
 845
 846
 847
 848
 849
 850
 851
 852
 853
 854
 855
 856
 857
 858
 859
 860
 861
 862
 863
 864
 865
 866
 867
 868
 869
 870
 871
 872
 873
 874
 875
 876
 877
 878
 879
 880
 881
 882
 883
 884
 885
 886
 887
 888
 889
 890
 891
 892
 893
 894
 895
 896
 897
 898
 899
 900
 901
 902
 903
 904
 905
 906
 907
 908
 909
 910
 911
 912
 913
 914
 915
 916
 917
 918
 919
 920
 921
 922
 923
 924
 925
 926
 927
 928
 929
 930
 931
 932
 933
 934
 935
 936
 937
 938
 939
 940
 941
 942
 943
 944
 945
 946
 947
 948
 949
 950
 951
 952
 953
 954
 955
 956
 957
 958
 959
 960
 961
 962
 963
 964
 965
 966
 967
 968
 969
 970
 971
 972
 973
 974
 975
 976
 977
 978
 979
 980
 981
 982
 983
 984
 985
 986
 987
 988
 989
 990
 991
 992
 993
 994
 995
 996
 997
 998
 999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
1231
1232
1233
1234
1235
1236
1237
1238
1239
1240
1241
1242
1243
1244
1245
1246
1247
1248
1249
1250
1251
1252
1253
1254
1255
1256
1257
1258
1259
1260
1261
1262
1263
1264
1265
1266
1267
1268
1269
1270
1271
1272
1273
1274
1275
1276
1277
1278
1279
1280
1281
1282
1283
1284
1285
1286
1287
1288
1289
1290
1291
1292
1293
1294
1295
1296
1297
1298
1299
1300
1301
1302
1303
1304
1305
1306
1307
1308
1309
1310
1311
1312
1313
1314
1315
1316
1317
1318
1319
1320
1321
1322
1323
1324
1325
1326
1327
1328
1329
1330
1331
1332
1333
1334
1335
1336
1337
1338
1339
1340
1341
1342
1343
1344
1345
1346
1347
1348
1349
1350
1351
1352
1353
1354
1355
1356
1357
1358
1359
1360
1361
1362
1363
1364
1365
1366
1367
1368
1369
1370
1371
1372
1373
1374
1375
1376
1377
1378
1379
1380
1381
1382
1383
1384
1385
1386
1387
1388
1389
1390
1391
1392
1393
1394
1395
1396
1397
1398
1399
1400
1401
1402
1403
1404
1405
1406
1407
1408
1409
1410
1411
1412
1413
1414
1415
1416
1417
1418
1419
1420
1421
1422
1423
1424
1425
1426
1427
1428
1429
1430
1431
1432
1433
1434
1435
1436
1437
1438
1439
1440
1441
1442
1443
1444
1445
1446
1447
1448
1449
1450
1451
1452
1453
1454
1455
1456
1457
1458
1459
1460
1461
1462
1463
1464
1465
1466
1467
1468
1469
1470
1471
1472
1473
1474
1475
1476
1477
1478
1479
1480
1481
1482
1483
1484
1485
1486
1487
1488
1489
1490
1491
1492
1493
1494
1495
1496
1497
1498
1499
1500
1501
1502
1503
1504
1505
1506
1507
1508
1509
1510
1511
1512
1513
1514
1515
1516
1517
1518
1519
1520
1521
1522
1523
1524
1525
1526
1527
1528
1529
1530
1531
1532
1533
1534
1535
1536
1537
1538
1539
1540
1541
1542
1543
1544
1545
1546
1547
1548
1549
1550
1551
1552
1553
1554
1555
1556
1557
1558
1559
1560
1561
1562
1563
1564
1565
1566
1567
1568
1569
1570
1571
1572
1573
1574
1575
1576
1577
1578
1579
1580
1581
1582
1583
1584
1585
1586
1587
1588
1589
1590
1591
1592
1593
1594
1595
1596
1597
1598
1599
1600
1601
1602
1603
1604
1605
1606
1607
1608
1609
1610
1611
1612
1613
1614
1615
1616
1617
1618
1619
1620
1621
1622
1623
1624
1625
1626
1627
1628
1629
1630
1631
1632
1633
1634
1635
1636
1637
1638
1639
1640
1641
1642
1643
1644
1645
1646
1647
1648
1649
1650
1651
1652
1653
1654
1655
1656
1657
1658
1659
1660
1661
1662
1663
1664
1665
1666
1667
1668
1669
1670
1671
1672
1673
1674
1675
1676
1677
1678
1679
1680
1681
1682
1683
1684
1685
1686
1687
1688
1689
1690
1691
1692
1693
1694
1695
1696
1697
1698
1699
1700
1701
1702
1703
1704
1705
1706
1707
1708
1709
1710
1711
1712
1713
1714
1715
1716
1717
1718
1719
1720
1721
1722
1723
1724
1725
1726
1727
1728
1729
1730
1731
1732
1733
1734
1735
1736
1737
1738
1739
1740
1741
1742
1743
1744
1745
1746
1747
1748
1749
1750
1751
1752
1753
1754
1755
1756
1757
1758
1759
1760
1761
1762
1763
1764
1765
1766
1767
1768
1769
1770
1771
1772
1773
1774
1775
1776
1777
1778
1779
1780
1781
1782
1783
1784
1785
1786
1787
1788
1789
1790
1791
1792
1793
1794
1795
1796
1797
1798
1799
1800
1801
1802
1803
1804
1805
1806
1807
1808
1809
1810
1811
1812
1813
1814
1815
1816
1817
1818
1819
1820
1821
1822
1823
1824
1825
1826
1827
1828
1829
1830
1831
1832
1833
1834
1835
1836
1837
1838
1839
1840
1841
1842
1843
1844
1845
1846
1847
1848
1849
1850
1851
1852
1853
1854
1855
1856
1857
1858
1859
1860
1861
1862
1863
1864
1865
1866
1867
1868
1869
1870
1871
1872
1873
1874
1875
1876
1877
1878
1879
1880
1881
1882
1883
1884
1885
1886
1887
1888
1889
1890
1891
1892
1893
1894
1895
1896
1897
1898
1899
1900
1901
1902
1903
1904
1905
1906
1907
1908
1909
1910
1911
1912
1913
1914
1915
1916
1917
1918
1919
1920
1921
1922
1923
1924
1925
1926
1927
1928
1929
1930
1931
1932
1933
1934
1935
1936
1937
1938
1939
1940
1941
1942
1943
1944
1945
1946
1947
1948
1949
1950
1951
1952
1953
1954
1955
1956
1957
1958
1959
1960
1961
1962
1963
1964
1965
1966
1967
1968
1969
1970
1971
Avaya-96xxIPTelephone-MIB
DEFINITIONS ::= BEGIN
IMPORTS
enterprises, OBJECT-TYPE, MODULE-IDENTITY, Integer32, IpAddress
FROM SNMPv2-SMI
DisplayString
FROM RFC1213-MIB ;
avaya96xxMIB MODULE-IDENTITY
LAST-UPDATED "0908052000Z"
ORGANIZATION "avaya"
CONTACT-INFO "Avaya Customer Services
Avaya, Inc.
211 Mt. Airy Road
Basking Ridge, NJ 07920 US (A
WWW: www.avaya.com
Tel: +1 908 953 6000"
DESCRIPTION "MIB Module for 96xx IP Telephones as of Release S3.1
in accordance with 96xx IP RFS 110716, Issue 3.1.
Copyright 2009 by Avaya Inc. All rights reserved."
::= { ipEndpointMIBs 2 }
avaya OBJECT IDENTIFIER ::= { enterprises 6889 }
products OBJECT IDENTIFIER ::= { avaya 1 }
avayaMibs OBJECT IDENTIFIER ::= { avaya 2 }
avayaipEndpointProd OBJECT IDENTIFIER ::= { products 69 }
ipEndpointMIBs OBJECT IDENTIFIER ::= { avayaMibs 69 }
endptID OBJECT IDENTIFIER ::= { avaya96xxMIB 1 }
endptAGCHAND OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Handset AGC status. This variable returns 1
if the endpoint's handset Automatic Gain Control
capability is currently enabled, else 0."
::= { endptID 1 }
endptAGCHEAD OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Headset AGC status. This variable returns 1
if the endpoint's headset Automatic Gain Control
capability is currently enabled, else 0."
::= { endptID 2 }
endptAGCSPKR OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Speakerphone AGC status. This variable returns
1 if the endpoint's speakerphone Automatic Gain Control
capability is currently enabled, else 0."
::= { endptID 3 }
endptAPPINUSE OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Application file name. This variable returns
the name of the application file in the endpoint."
::= { endptID 4 }
endptAPPNAME OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Application file ID. This variable returns
a string specifying the system-specific application
file that should be used for telephone operation."
::= { endptID 5 }
endptBAKLIGHTOFF OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Backlight idle timer setting. This variable returns
the number of minutes of idle time, after which the
telephone backlightis turned off. Range is 0-999, with a
default of 120. Used in phones with backlit displays."
::= { endptID 6 }
endptBOOTNAME OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Boot code file ID. This variable returns a string
specifying the boot code
file used to initiate telephone operation."
::= { endptID 7 }
endptBRURI OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Backup and restore URI. This variable returns
a string specifying the URI used for backup and restore files."
::= { endptID 8 }
endptCNAPORT OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Chatter server port. This variable returns the
Chatter server registration transport-layer port number
(from 0 to 65535; default is 8888)."
::= { endptID 9 }
endptCNASRVR OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "CNA server addresses. This variable returns zero
or more Chatter server addresses for network analysis, in
dotted decimal or DNS format."
::= { endptID 10 }
endptCODECR OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Receive codec. This variable returns the
designation of the Receive codec currently in use."
::= { endptID 11 }
endptCODECT OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Transmit codec. This variable returns the
designation of the Transmit codec currently in use."
::= { endptID 12 }
endptDHCPLEASEREBIND OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Rebind time of IPADD lease. This
variable returns an unsigned integer specifying
the length of time at which to rebind the IPADD
lease, in seconds as received by DHCP option 59
or as computed from the lease time if option 59 is
is not received."
::= { endptID 13 }
endptDHCPLEASERENEW OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Renewal time of IPADD lease. This
variable returns an unsigned integer specifying
the length of time at which to renew the IPADD
lease, in seconds as received by DHCP option 58
or as computed from the lease time if option 58 is
is not received."
::= { endptID 14 }
endptDHCPLEASETIME OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Duration of IPADD lease. This variable
returns an unsigned integer specifying the length
of time of the IPADD lease, in seconds as received
by DHCP option 51."
::= { endptID 15 }
endptDNSSRVR OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "List of DNS server addresses. This variable
returns a sequence of IP addresses, in dotted-decimal
format and separated by commas, of DNS servers
available for use."
::= { endptID 16 }
endptDOMAIN OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "List of DNS domain labels. This variable
returns a sequence of labels, separated by periods, for
use as the highest-level domain in resolving DNS names
in system values."
::= { endptID 17 }
endptDOT1X OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Current value for 802.1X handling. This variable returns
0 if Supplicant operation is Enabled, 1 if Supplicant operation is
Enabled with proxy Logoff, and 2 if Supplicant operation is Disabled.
The default is 0."
::= { endptID 18 }
endptDSCPAUD OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "DSCP for audio. This variable specifies the
Differentiated Services Code Point for audio
currently in use (between 0 and 63 inclusive)."
::= { endptID 19 }
endptDSCPBBE OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "DSCP BBE priority value. This variable returns
an integer between 0 and 7 inclusive specifying the
far-end endpoint's DiffServ Better than Best Effort audio
priority value."
::= { endptID 20 }
endptDSCPSIG OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION " DSCP for signaling. This variable specifies
the Differentiated Services Code Point for signaling
currently in use (between 0 and 63 inclusive)."
::= { endptID 21 }
endptDSPVERSION OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "DSP Version. This variable returns a string
of up to 10 characters, that identifies the version of
the DSP firmware in the endpoint."
::= { endptID 22 }
endptFEIPADD OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Audio endpoint address. This variable returns
a 4-octet string specifying the address of the far-end
audio endpoint currently in use."
::= { endptID 23 }
endptFEPORT OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Audio endpoint port number. This variable returns
the far-end endpoint's transport layer port number for
audio, currently in use."
::= { endptID 24 }
endptGIPADD OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "List of router addresses. This variable returns a
sequence of IP addresses, in dotted-decimal format and
separated by commas, of routers available for use."
::= { endptID 25 }
endptGIPINUSE OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Router address. This variable returns
a 4-octet string specifying the IP address of
the router currently in use."
::= { endptID 26 }
endptGROUP OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Group identifier. This variable returns the
integer corresponding to the current group identifier."
::= { endptID 27 }
endptHTTPDIR OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "HTTP server Directory. This variable returns
the path used in formation of the URI for HTTP GET
operations."
::= { endptID 28 }
endptHTTPSRVR OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "HTTP server IP addresses. This variable
returns a comma-separated list of HTTP server IP
addresses available for use, in dotted-decimal or
DNS format."
::= { endptID 29 }
endptHTTPUSED OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "HTTP initialization server IP address. This
variable returns a 4-octet IP address for the HTTP server
used during initialization (all zeroes if no server
successfully used during initialization)."
::= { endptID 30 }
endptICMPDU OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Current value for ICMP Destination message handling.
This variable returns 0 if the telephone does not transmit ICMP
Destination Unreachable messages are not transmitted; 1 if such
messages are transmitted only in response to datagrams that
designate closed UDP ports or if the designated transport
protocol is not supported, and 2 if such such messages are
sent only in response to datagrams that designate closed UDP
or TCP ports or if the designated transport protocol is not
supported. The default is 1."
::= { endptID 31 }
endptICMPRED OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Current value for ICMP Redirect message handling. This
variable returns 1 if received Redict messages are handled as
specified in RFC 1122, Sections 3.2.2.2 and 3.3.1.2, else 0.
The default is 0."
::= { endptID 32 }
endptIPADD OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Endpoint IP address. This variable returns a 4-octet string
specifying the endpoint's current IP address."
::= { endptID 33 }
endptJMSEC OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Jitter buffer size. This variable returns the number of
milliseconds of delay added to compensate for network jitter, from
0-300 milliseconds. The default is 10."
::= { endptID 34 }
endptL2Q OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "802.1Q framing flag. This variable returns 0
if the Layer 2 802.1Q framing parameter is set to
'auto', 1 if it is set to on/enabled, else 2 for
off/disabled."
::= { endptID 35 }
endptL2QAUD OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Audio priority. This variable returns an
integer between 0 and 7 inclusive specifying the
current Layer 2 802.1Q audio priority value."
::= { endptID 36 }
endptL2QSIG OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Signaling priority. This variable returns
an integer between 0 and 7 inclusive specifying the
current Layer 2 802.1Q signaling priority value."
::= { endptID 37 }
endptL2QSTAT OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "802.1Q tagging flag. This variable returns 0
if the Layer 2 802.1Q tagging parameter is currently
OFF, else 1."
::= { endptID 38 }
endptL2QVLAN OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Administered Telephone VLAN Identifier. This variable
returns an integer between 0 and 4094 inclusive specifying the
administered Layer 2 802.1Q VLAN Identifier value."
::= { endptID 39 }
endptL2QVLANINUSE OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Telephone VLAN Identifier in use. This variable
returns an integer between 0 and 4094 inclusive specifying
the current Layer 2 802.1Q VLAN Identifier value."
::= { endptID 40 }
endptLOGSRVR OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Event Log server address. This variable
returns at most one IP address, in dotted-decimal
or DNS format, of the server to be used for event
logging. This function is intended for Avaya use,
in debugging if necessary."
::= { endptID 41 }
endptMACADDR OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "MAC address. This variable returns a 6-octet
string specifying the endpoint's MAC address."
::= { endptID 42 }
endptMODEL OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Model identifier. This variable returns
a string of up to 8 ASCII characters."
::= { endptID 43 }
endptNETMASK OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Subnet mask. This variable returns a
4-octet string specifying the subnet mask
currently in use."
::= { endptID 44 }
endptPHONECC OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Phone comcode. This variable returns a string
of up to 9 numerical characters, specifying the comcode
of the endpoint itself."
::= { endptID 45 }
endptPHONESN OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Housing serial number. This variable
returns a string of up to 18 ASCII characters,
specifying the serial number on the outside
of the endpoint's housing."
::= { endptID 46 }
endptPHY1DUPLEX OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ethernet line interface duplex setting. This variable
returns 1 if the interface is half-duplex and 2 if the interface
is full duplex."
::= { endptID 47 }
endptPHY1SPEED OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ethernet interface speed. This variable
returns a string specifying the endpoint's Ethernet
interface speed in Mbps: '100' or '10'."
::= { endptID 48 }
endptPHY1STAT OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ethernet line interface status. This
variable returns 0 if the endpoint's Ethernet line
interface is currently NOT enabled, 1 if the Ethernet
line interface is currently for auto-negotiation, 2 for
10Mbps half-duplex, 3 for 10Mbps full-duplex, 4 for
100Mbps half-duplex, and 5 for 100Mbps full-duplex."
::= { endptID 49 }
endptPHY2DUPLEX OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Secondary Ethernet interface duplex setting. This
variable returns 0 if no link is established, 1 if the interface
is half-duplex,and 2 if the interface is full duplex."
::= { endptID 50 }
endptPHY2PRIO OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Secondary Ethernet interface Layer 2 priority. This
variable returns 0 through 7, and is used with endptVLANSEP.
The default is 0."
::= { endptID 51 }
endptPHY2SPEED OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Secondary Ethernet speed. This variable
returns a string specifying the endpoint's Ethernet
interface speed in Mbps: '100' or '10' or '0'."
::= { endptID 52 }
endptPHY2STAT OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Secondary Ethernet interface status. This
variable returns 0 if the endpoint's Secondary Ethernet
interface is currently NOT enabled, 1 if the Secondary Ethernet
interface is currently for auto-negotiation, 2 for
10Mbps half-duplex, 3 for 10Mbps full-duplex, 4 for
100Mbps half-duplex, and 5 for 100Mbps full-duplex."
::= { endptID 53 }
endptPHY2VLAN OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Secondary Ethernet interface VLAN ID. This
variable returns an integer between 0 and 4094 inclusive
specifying the current Layer 2 802.1Q VLAN Identifier
value for tagged frames received on the secondary Ethernet
interface while VLAN separation is enabled."
::= { endptID 54 }
endptPORTAUD OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Transport-layer audio port. This variable returns
the endpoint's transport layer port number for audio,
currently in use."
::= { endptID 55 }
endptPROCPSWD OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Local Procedure Password. This variable returns
0 if the Local Procedure Password is null, else 1."
::= { endptID 56 }
endptPROCSTAT OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Local Procedure flag. This variable returns 0 if
Local Procedures are currently allowed for this telephone,
else 1."
::= { endptID 57 }
endptPWBCC OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "PWB comcode. This variable returns
a string of up to 9 numerical characters,
specifying the comcode or version number of
the printed wiring board of the endpoint."
::= { endptID 58 }
endptPWBSN OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "PWB serial number. This variable
returns a string of up to 18 ASCII characters,
specifying the serial number on the endpoint's
printed wiring board, or N/A if the board has
no serial number."
::= { endptID 59 }
endptRTCPCONT OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "RTCP Control flag. This variable returns
0 if the RTCP control status is off/disabled, else 1."
::= { endptID 60 }
endptRTCPFLOW OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "RTCP Flowrate. This variable returns
an integer between 5 and 30 inclusive specifying the
RTCP flowrate in milliseconds."
::= { endptID 61 }
endptRTCPMON OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "RTCP Monitor address. This variable returns a
4-octet string specifying the IP address of the RTCP
monitor currently in use."
::= { endptID 62 }
endptRSVPCONT OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "RSVP Control flag. This variable returns
0 if the RSVP control status is off/disabled, else 1."
::= { endptID 63 }
endptRSVPRFRSH OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "RSVP Refresh rate. This variable returns
an integer between 1 and 3600 inclusive specifying the
RSVP refresh rate in milliseconds."
::= { endptID 64 }
endptRSVPRTRY OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "RSVP Failed Retry flag. This variable returns
0 if the RSVP Failed Retry Reservation control status is
off/disabled, else 1."
::= { endptID 65 }
endptRSVPPROF OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "RSVP profile flag. This variable returns
0 if the RSVP profile is guaranteed, else 1 for controlled
load."
::= { endptID 66 }
endptSIG OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Signaling protocol download flag. This variable
returns the integer corresponding to the current
signaling protocol."
::= { endptID 67 }
endptSNMPADD OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "SNMP source addresses. This variable returns
one or more allowable source IP addresses for SNMP queries,
in dotted decimal or DNS format."
::= { endptID 68 }
endptSTATIC OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Static programming override flag. This variable
returns the integer corresponding to the current level of
override permissions for static programming."
::= { endptID 69 }
endptTLSSRVR OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "TLS server addresses. This variable returns zero
or more Transport Layer Security server addresses for
software download, in dotted decimal or DNS format."
::= { endptID 70 }
endptTLSUSED OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "TLS server address used. This variable returns the
TLS server address from TLSSRVR used, if any, during
initialization, or all zeroes if no TLS server was used."
::= { endptID 71 }
endptTMSEC OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Transmit buffer fill level. This variable returns
the transmit buffer minimum fill level, in msec, currently
in use."
::= { endptID 72 }
endptVLANLIST OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "VLAN ID list. This variable returns a list of
zero or more VLAN IDs."
::= { endptID 73 }
endptVLANSEP OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "VLAN separation value. This variable returns 0
if frames received on the secondary Ethernet interface are
unchanged before forwarding; else 1, which is the default."
::= { endptID 74 }
endptFONT OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Font file identifier. This variable returns a text string
with the name of the font file stored in the phone, if any."
::= { endptID 75 }
endptLANGFILES OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Language file list. This variable returns a comma-separated
text string listing the language files stored in the phone,
if any."
::= { endptID 76 }
endptPHNEMERGNUM OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Emergency Number. This variable returns a telephone number
to be dialed when an Emergency softkey is pressed."
::= { endptID 77}
endptAUDIOENV OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Audio Environment parameter. This variable returns the current value
of AUDIOENV."
::= { endptID 78}
endptAUDIOSTHD OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Audio Handset Sidetone parameter. This variable returns the current
value of AUDIOSTHD."
::= { endptID 79}
endptAUDIOSTHS OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Audio Headset Sidetone parameter. This variable returns the current
value of AUDIOSTHS."
::= { endptID 80}
endptBRAUTH OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Backup/Restore authentication control. This variable returns 0
if the call server IP address and telephone's registration password is NOT
not included as credentials in an Authentication request-header; 1 (the default) if that
data is included and the telephone will accept the server's digital certificate if signed by
Avaya, or 2 if that data is included and the telephone will accept the server's
digital certificate if signed by Avaya or a trusted certificate based on TRUSTCERTS."
::= { endptID 81}
endptDHCPINUSE OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IP address of DHCP server from which phone's IP address was obtained. This
variable returns four zeroes by default or when the telephone is manually programmed."
::= { endptID 82 }
endptDHCPLEASEEXP OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "DHCP lease expiration. This variable returns the time (in seconds) remaining
until the expiration of the current DHCP lease; or 0 if the lease has expired."
::= { endptID 83 }
endptDHCPSTD OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "DHCP compliance flag. This variable returns 0 (the default) if the
telephone ignores the DHCP standard and continues using its IP address after its
lease has expired, assuming the DHCP server cannot be reached. The value 1 is returned
if the DHCP standard is followed and the telephone stops using its IP address (IPADD)."
::= { endptID 84}
endptDHCPT1REM OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "DHCP lease renewal expiration. This variable returns the time (in seconds) until
the start of IP address lease renewal, -1 if the lease is infinite, or 0 if the timer has expired."
::= { endptID 85 }
endptDHCPT2REM OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "DHCP lease rebinding expiration. This variable returns the time (in seconds) remaining
until the start of IP address lease renewal, -1 if the lease is infinite, or 0 if the timer has expired."
::= { endptID 86 }
endptDOT1XSTAT OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "802.1X Supplicant status. This variable returns 0 if 802.1X Supplicant mode is
Disabled; 1 (the default) if the supplicant mode is set to Unicast-only, and 2 if the supplicant
mode is set to Unicast/Multicast."
::= { endptID 87}
endptHTTPPORT OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "HTTP port number. This variable returns the TCP port number used for HTTP file downloading."
::= { endptID 88}
endptTLSDIR OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "TLS Server Directory. This variable returns the path that
is prepended to all file names used in HTTPS GET operations."
::= { endptID 89}
endptTLSPORT OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "TLS server port number. This variable returns
the TCP port number used for HTTPS file downloading."
::= { endptID 90}
endptMEMHEAPFREE OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Heap allocation. This variable returns the number of bytes of
volatile memory currently allocated for, but unused by, the Heap."
::= { endptID 91}
endptSSONCONTENT OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "SSON Content. This variable returns the data portion of the
DHCP site-specific option designated by NVSSON, exactly as received."
::= { endptID 92}
endptTLSSRVRID OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "TLS server ID flag. This variable returns 1 if the TLS server
identity is to be checked against its certificate, otherwise 0."
::= { endptID 93}
endptTRUSTCERTS OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Trusted Certificates list. This variable returns the current
trusted certificates to be downloaded; 0-255 ASCII
characters, 0 or more filenames or URLs separated by commas."
::= { endptID 94}
endptVOXFILES OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Voice language files list. This variable returns the current
list of voice langauge files to be downloaded; 0-255 ASCII
characters, 0 or more filenames separated by commas."
::= { endptID 95}
endptGRATARP OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Gratuitous ARP flag. This variable returns 1 oif gratuitous ARP messages
are to be process; else 0."
::= { endptID 96 }
endptNVM OBJECT IDENTIFIER ::= { avaya96xxMIB 2 }
endptNVAGCHAND OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Non-Volatile Memory (NVM)Handset AGC status. This
variable returns 1 if the endpoint's handset Automatic
Gain Control capability in NVM is currently enabled, else 0."
::= { endptNVM 1 }
endptNVAGCHEAD OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NVM Headset AGC status. This variable returns 1
if the endpoint's headset Automatic Gain Control capability
in NVM is currently enabled, else 0."
::= { endptNVM 2 }
endptNVAGCSPKR OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Speakerphone AGC status. This variable returns 1
if the endpoint's speakerphone Automatic Gain Control
capability in NVM is currently enabled, else 0."
::= { endptNVM 3 }
endptNVALERT OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION "Alerting Mode flag. This variable returns 1 if
the alerting mode setting in non-volatile memory is
enabled, else 0."
::= { endptNVM 4 }
endptNVAUTH OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Script file authentication flag. This variable
returns 1 if the endpoint must authenticate script files,
else 0."
::= { endptNVM 5 }
endptNVBRIGHTNESS OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Display Brightness setting. This variable returns
the value of the display contrast setting in non-volatile
memory. Range is 0-5, with 4 the default."
::= { endptNVM 6 }
endptNVCALLSRVR OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION "NVM IP address of call server if manually entered.
Default is four zeroes."
::= { endptNVM 7 }
endptNVCHADDR OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Manually-entered DHCP chaddr value. This
variable returns a manually-entered value for the DHCP
chaddr field as stored in non-volatile memory, if any.
A Hexadecimal value with range of 0 (the default) to
999999."
::= { endptNVM 8 }
endptNVCONTRAST OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Display Contrast setting. This variable returns
the value of the display contrast setting in non-volatile
memory. Range is 0-15, with 8 the default."
::= { endptNVM 9 }
endptNVFILESRVR OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION "NVM File server address. This variable returns
a 4-octet string specifying the IP address of the file
server as stored in NVM."
::= { endptNVM 10 }
endptNVGIPADD OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NVM Router address. This variable returns a 4-
octet string specifying the IP address of the router as
stored in NVM."
::= { endptNVM 11 }
endptNVIPADD OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NVM IP address. This variable returns a 4-octet
string specifying the endpoint's IP address stored in
NVM."
::= { endptNVM 12 }
endptNVL2Q OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NVM 802.1Q flag. This variable returns 0 if
the Layer 2 802.1Q framing parameter in NVM is set to
'auto', 1 if it is set to on/enabled, else 2 for
off/disabled."
::= { endptNVM 13 }
endptNVL2QVLAN OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NVM VLAN Identifier. This variable returns an
integer between 0 and 4094 inclusive specifying the Layer
2 802.1Q VLAN Identifier value stored in NVM."
::= { endptNVM 14 }
endptNVLOGSTAT OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NVM Event Log flag. This variable returns 0 if the
endpoint's event logging capability in NVM is currently
NOT enabled, else 1."
::= { endptNVM 15 }
endptNVNETMASK OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NVM Subnet mask. This variable returns a 4-octet
string specifying the subnet mask as stored in NVM."
::= { endptNVM 16 }
endptNVPHY1STAT OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NVM Ethernet line interface status. This
variable returns 0 if the endpoint's Ethernet line
interface in NVM iscurrently NOT enabled, 1 if the
Ethernet line interface in NVM is currently for
auto-negotiation, 2 for 10Mbps half-duplex, 3 for
10Mbps full-duplex, 4 for 100Mbps half-duplex, and
5 for 100Mbps full-duplex."
::= { endptNVM 17 }
endptNVPHY2STAT OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NVM Secondary Ethernet interface setting. This
variable returns 0 if the endpoint's secondary Ethernet
interface in NVM is currently NOT enabled(or none exists),
1 if the hub is set for auto-negotiation, 2 for 10Mbps
half-duplex, 3 for 10Mbps full-duplex, 4 for 100Mbps
half-duplex, and 5 for 100Mbps full-duplex."
::= { endptNVM 18 }
endptNVSSON OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NVM Site-specific option number. This variable
returns an integer between 128 and 254 inclusive,
specifying the SSON stored in NVM. The default is 176."
::= { endptNVM 19 }
endptNVVLANTEST OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NVM VLAN pause parameter. This variable returns
the number of seconds stored in NVM for the endppoint to
wait for a DHCPOFFER message when using a non-zero VLAN ID.
Valid values are integers from 0 to 999 inclusive."
::= { endptNVM 20 }
endptNVLANGFILE OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Language file. This variable returns the name
of the language file in non-volatile memory."
::= { endptNVM 21 }
endptNVTRUSTLIST OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "List of trusted certificates. This variable returns 0-255
ASCII characters: 0 or more filenames or URLs separated by commas
and without intervening spaces, containing the list of
downloaded trusted certificates in non-volatile memory."
::= { endptNVM 22 }
endptNVVOXFILE OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Voice language file. This variable returns 0-32
ASCII characters: 0 or 1filename, identifying the voice language file,
if any, in non-volatile memory."
::= { endptNVM 23 }
endptNVRINGTONESTYLE OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ringing style identifier. This variable returns
the number of seconds stored in NVM for the endppoint to
wait for a DHCPOFFER message when using a non-zero VLAN ID.
Valid values are integers from 0 to 999 inclusive."
::= { endptNVM 24 }
endptNVSBM24BRIGHTNESS1 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "SBM24 backlight level. This variable returns
the value of the backlight brightness for the first SBM24 attached,
to the telephone, if any. Valid values are integers from 1 to 5 inclusive."
::= { endptNVM 25 }
endptNVSBM24BRIGHTNESS2 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "SBM24 backlight level. This variable returns
the value of the backlight brightness for the second SBM24 attached,
to the telephone, if any. Valid values are integers from 1 to 5 inclusive."
::= { endptNVM 26 }
endptNVSBM24BRIGHTNESS3 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "SBM24 backlight level. This variable returns
the value of the backlight brightness for the third SBM24 attached,
to the telephone, if any. Valid values are integers from 1 to 5 inclusive."
::= { endptNVM 27 }
endptMaintenance OBJECT IDENTIFIER ::= { avaya96xxMIB 3 }
endptAPPSTAT OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Application download flag. This variable
returns '0' if the most recent attempt to download
and store an application file was successful. This
variable returns '1' if the most recent attempt to
download an application file was successful but the
file was not successfully stored in NVM. This variable
returns '2' if the most recent attempt to download an
application file was NOT successful."
::= { endptMaintenance 1 }
endptUPGRADESTAT OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Script loading status flag. This variable
returns '0' if a 96xxupgrade.txt file was successfully
obtained and interpreted since the last power-up or reset.
This variable returns '1' if the file was successfully
obtained but NOT successfully interpreted since the last
power-up or reset. This variable returns '2' if the file
was NOT successfully obtained since the last
power-up or reset."
::= { endptMaintenance 2 }
endptRecentLog OBJECT-TYPE
SYNTAX SEQUENCE OF EndptRecentLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Each entry is one of up to 75 syslog event
messages added since last reset or power-up, each of
which has severity code less than the value of NVLOGLOCAL.
Entries are in chronological order, oldest first."
::= { endptMaintenance 3 }
endptRecentLogEntry OBJECT-TYPE
SYNTAX EndptRecentLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Each entry is one of up to 75 syslog event
messages added since last reset or power-up, each of
which has severity code less than the value of NVLOGLOCAL.
Entries are in chronological order, oldest first."
INDEX { endptRecentLogText }
::= { endptRecentLog 1 }
EndptRecentLogEntry ::=
SEQUENCE {
endptRecentLogText
DisplayString
}
endptRecentLogText OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Syslog event message."
::= { endptRecentLogEntry 1 }
endptResetLog OBJECT-TYPE
SYNTAX SEQUENCE OF EndptResetLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Each entry is one of up to 75 syslog event
messages added before the last reset or power-up, each of
which has severity code less than the value of NVLOGLOCAL.
Entries are in chronological order, oldest first."
::= { endptMaintenance 4 }
endptResetLogEntry OBJECT-TYPE
SYNTAX EndptResetLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Each entry is one of up to 75 syslog event
messages added before the last reset or power-up, each of
which has severity code less than the value of NVLOGLOCAL.
Entries are in chronological order, oldest first."
INDEX { endptResetLogText }
::= { endptResetLog 1 }
EndptResetLogEntry ::=
SEQUENCE {
endptResetLogText
DisplayString
}
endptResetLogText OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Syslog event message."
::= { endptResetLogEntry 1 }
endptApps OBJECT IDENTIFIER ::= { avaya96xxMIB 4 }
endptAUDIOPATH OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "User audio path. This variable returns 0 if the
telephone does not support a 2-way speaker or does not
have a headset jack; 1 if the user audio path is with the
speakerphone, and 2 if the user audio path is with the headset."
::= { endptApps 1 }
endptENHDIALSTAT OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Enhanced Local Dialing status. This variable
returns 0 if the Enhanced Local Dialing status is
off/disabled, else 1."
::= { endptApps 2 }
endptSUBSCRIBELIST OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "96xx Web push subscription list. This
variable returns a string containing one or more fully
qualified URLs to which the phone's Browser application
subscribes for potential pushed content."
::= { endptApps 3 }
endptTPSLIST OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "96xxWeb Trusted Push Server list. This
variable returns a string containing one or more domains
and paths in DNS format, used to determine for
validation of push requests."
::= { endptApps 4 }
endptWMLEXCEPT OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "96xx Web Proxy Server Exception List. This
variable returns a string specifying a list of one or
more HTTP proxy server Exception domains, separated by
commas with no intervening spaces, up to 127 total
characters. Used by the 96xx Browser application."
::= { endptApps 5 }
endptWMLHOME OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "96xx Web application URL. This variable returns
a URL of the Home page for the 96xx Browser application."
::= { endptApps 6 }
endptWMLIDLETIME OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Web Idle Timer. This variable returns the number
of minutes, from 1 to 60 inclusive, of idle activity on the
telephone before the Web Idle Timer URI is displayed."
::= { endptApps 7 }
endptWMLIDLEURI OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Web Idle Timer URI. This variable returns the
URI of the WML page displayed after the 96xxWeb
Idle Timer expires."
::= { endptApps 8 }
endptWMLPORT OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "96xx Browser application TCP port. This variable
returns an integer specifying the TCP port most recently
used for the HTTP proxy server. Used by the 96xx
Browser application."
::= { endptApps 9 }
endptWMLPROXY OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "96xx Web Proxy Server. This variable returns
an IP addresses, in dotted-decimal or DNS format, of an
HTTP proxy server. Used by the 96xx Browser application."
::= { endptApps 10 }
endptGUESTDURATION OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "96xx Guest Login Duration. This variable
returns an integer specifying the number of hours from 1-12
for the Guest Login duration. The default is 2."
::= { endptApps 11 }
endptGUESTLOGINSTAT OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "96xx Guest Login permission flag. This variable
returns 1 if the user is allowed to initiate a Guest Login,
otherwise 0."
::= { endptApps 12 }
endptGUESTWARNING OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "96xx Guest Login Warning interval. This variable
returns an integer specifying the number of minutes from 1-15
before the expiration of a Guest Login that a warnign screen
is displayed. The default is 5."
::= { endptApps 13 }
endptPUSHCAP OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Push capabilities. This variable returns a
4-digit integer specifying the phone administration for audio transmit,
audi receive, display (web), and Top Line pushes, respectively.
The valid digits are 0 (Disabled), 1 (barge-in onl ypushes of the given
type Enabled) and 2 (both barge-in and normal pushes of the given
type Enabled). The default is 2222."
::= { endptApps 14 }
endptPUSHPORT OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Push listening port. This variable returns an
integer specifying the TCP listening port most recently
used for the HTTP server.."
::= { endptApps 15 }
endptQKLOGINSTAT OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Quick Login permission flag. This variable
returns 1 (the default) if users are permitted to use the # button
to use a previous login and password during registration, else 0."
::= { endptApps 16 }
endptSCREENSAVER OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Custom screen saver URL. This variable returns
a filename from 0-32 characters that specifies an image displayed
in lieu of the Avaya screen saver."
::= {endptApps 17 }
endptWMLSMALL OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "9610 Web application URL. This variable returns
a URL of the Home page for the 9610 Browser application."
::= { endptApps 18 }
endptCLDELCALLBK OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Call Log Callback Deletion flag. This variable
returns 1 if a Missed Call Log entry is deleted from the Call Log
if the user Calls that entry from the Call Log, else 0 (the default) ."
::= { endptApps 19 }
endptFBONCASCREEN OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Feature Buttons on Call Appearance List flag. This
variable returns 1 if administered feature buttons are allowed to be
listed on the Call Appearance Screen, else 0 (the default) ."
::= { endptApps 20 }
endptLOGBACKUP OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Call Log backup permission flag. This variable
returns 1 (the default) if the telephone is to automatically store and
retrieve a file of Call Log entries, else 0."
::= { endptApps 21 }
endptLOGMISSEDONCE OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Missed Call Log Counter flag. This variable
returns 1 if the telephone keeps only one Missed Call Log record for
a given Name and Number, as well as a counter of Missed calls from
that Name and Number, else 0 (the default)."
::= { endptApps 22 }
endptLOGUNSEEN OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Log redirected calls permission flag. This variable
returns 1 if the telephone is to create Call Log entries for calls that
are redirected from the physical telephone, else 0 (the default)."
::= { endptApps 23 }
endptAPPSTATVALUE OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Applications permission status. This variable returns the
current value of the APPSTAT parameter, which can restrict the
availability of some of the telephone applications, as documented in
the 9600 Series Admin Guide."
::= { endptApps 24 }
endptOPSTAT OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Options permission status. This variable returns the
current value of the OPSTAT parameter, which can restrict the
availability of some of the telephone options, as documented in
the 9600 Series Admin Guide."
::= { endptApps 25}
endptOPSTAT2 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Options permission override parameter. This variable returns
the current value of the OPSTAT2 parameter, which can override specific
functionality of the OPSTAT parameter, as documented in the 9600
Series Admin Guide."
::= { endptApps 26 }
endptAdjuncts OBJECT IDENTIFIER ::= { avaya96xxMIB 5 }
endptBMODS OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Button Module interface usage. This variable returns
the number of devicess attached (or daisy-chained) to the
endpoint through the button module interface."
::= { endptAdjuncts 1}
endptBTADHWVER OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Bluetooth adapter hardware version. This variable returns
the hardware version of an attached Bluetooth Adapter, if any.
If none, null is returned."
::= {endptAdjuncts 2}
endptBTADSTAT OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Bluetooth adapter presence. This variable returns
1 if the presence. of a Bluetooth adapter is detected, else 0."
::= { endptAdjuncts 3}
endptBTADSWVER OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Bluetooth adapter software version. This variable returns
the software version of an attached Bluetooth Adapter, if any.
If none, null is returned."
::= {endptAdjuncts 4}
endptGIGEHWVER OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "GigE adapter hardware version. This variable returns
the hardware version of an attached GigE Adapter, if any.
If none, null is returned."
::= {endptAdjuncts 5}
endptGIGESTAT OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "GigE adapter presence. This variable returns
1 if the presence. of a GigE adapter is detected, else 0."
::= { endptAdjuncts 6}
endptGIGESWVER OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "GigE adapter software version. This variable returns
the software version of an attached GigE Adapter, if any.
If none, null is returned."
::= {endptAdjuncts 7}
endptSBM1HWVER OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "SBM #1 hardware version. This variable returns
the hardware version of the first button module, if any.
If none, null is returned."
::= {endptAdjuncts 8}
endptSBM1SWVER OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "SBM #1 software version. This variable returns
the software version of the first button module, if any.
If none, null is returned."
::= {endptAdjuncts 9}
endptSBM2HWVER OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "SBM #2 hardware version. This variable returns
the hardware version of the second button module, if any.
If none, null is returned."
::= {endptAdjuncts 10}
endptSBM2SWVER OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "SBM #2 software version. This variable returns
the software version of the second button module, if any."
::= {endptAdjuncts 11}
endptSBM3HWVER OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "SBM #3 hardware version. This variable returns
the hardware version of the third button module, if any.
If none, null is returned."
::= {endptAdjuncts 12}
endptSBM3SWVER OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "SBM #3 software version. This variable returns
the software version of the third button module, if any."
::= {endptAdjuncts 13}
endptSBMSTAT OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Button Modules attached. This variable returns
the number of Button Modules attached (or daisy-chained)
to the endpoint."
::= { endptAdjuncts 14}
endptUSBPOWER OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "USB Power Provision. This variable returns 0 if
the telephone is to disable USB power, 1 if USB power is enabled
only if the telephone is Aux powered, 2 if USB power is enabled
regardless of the power source, or 3 if USB power is enabled if
the telephone is Aux powered or PoE Class 3."
::= { endptAdjuncts 15}
endptH323 OBJECT IDENTIFIER ::= { avaya96xxMIB 6 }
endptMCIPADD OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "List of call server addresses. This
variable returns a sequence of IP addresses, in
dotted-decimal or DNS format and separated by
commas, of call server IP addresses available
for use."
::= { endptH323 1 }
endptGKINUSE OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Gatekeeper in use address. This variable
returns a 4-octet string specifying the IP
address of the gatekeeper currently in use."
::= { endptH323 2 }
endptNVPHONEXT OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Endpoint's phone extension. This variable
returns a text string identifying the endpoint's extension,
in free text format. The default value is NULL. "
::= { endptH323 3 }
endptRASGkList OBJECT-TYPE
SYNTAX SEQUENCE OF EndptRASGkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Each entry is one of up to 75 gatekeeper
addresses in dotted-decimal or DNS format, as downloaded from
the call server during RAS. Entries are listed in the order received."
::= { endptH323 4 }
endptRASGkEntry OBJECT-TYPE
SYNTAX EndptRASGkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Each entry is one of up to 75 gatekeeper
addresses in dotted-decimal or DNS format, as downloaded from
the call server during RAS. Entries are listed in the order received."
INDEX { endptRASGkEntryData}
::= { endptRASGkList 1 }
EndptRASGkEntry ::=
SEQUENCE {
endptRASGkEntryData
DisplayString
}
endptRASGkEntryData OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Data for an individual RAS-provided Gatekeeper."
::= { endptRASGkEntry 1 }
endptREREGISTER OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Reregistration Timer value. This variable returns
the number of minutes from 1 to 120 inclusive the telephone
waits between re-registration attempts if unnamed registration
is not in effect. The default is 20 minutes."
::= { endptH323 5 }
endptSERVICESTAT OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status of phone in service. This variable returns
0 if the phone is not in service nor is attempting to register,
1 if the telephone has failed Gatekeeper Discovery, 2 if the
telephone has successfully completed Gatekeeper Discovery but
has not successfully completed registration, 3 if the telephone
has successfully registered but does not have a TCP connection,
and 4 if the telephone is registered and has a TCP connection."
::= { endptH323 6 }
endptGKTCPPORT OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Gatekeeper Port. This variable returns 0 if the
telephone is not currently registered, otherwise it returns the
TCP port number on the gatekeeper with which the telephone
has a signaling connection established."
::= { endptH323 7 }
endptCERT OBJECT IDENTIFIER ::= { avaya96xxMIB 8 }
endptMYCERTCAID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Certificate Authority ID. This variable returns the
Certificate Authority Identifier to be used in a certificate request."
::= { endptCERT 1 }
endptMYCERTCN OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Certificate Common Name. This variable returns the
Common Name of the Subject of a certificate request."
::= { endptCERT 2 }
endptMYCERTDN OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Certificate Distinguished Name. This variable returns additional information (sometimes
common country and organizational information) that, together with the Common
Name, is used to create a Distinguished Name."
::= { endptCERT 3 }
endptMYCERTKEYLEN OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Key length. This variable returns the bit length of the public and private keys generated
for a certificate request"
::= { endptCERT 4 }
endptMYCERTRENEW OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Certificate Renewal interval. This variable returns the percentage of a certificate Validity
interval after which renewal procedures will be initiated."
::= { endptCERT 5 }
endptMYCERTURL OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "SCEP URL. This variable returns the URL to be used
to contact an SCEP server."
::= { endptCERT 6 }
endptMYCERTWAIT OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Certificate wait flag. This variable returns 0 if the
telephone will wait until a pending certificate request is
complete, else 1 if it will periodically check in the background."
::= { endptCERT 7 }
endptVPN OBJECT IDENTIFIER ::= { avaya96xxMIB 9 }
endptALWCLRNOTIFY OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "ISAKP Notification flag. This variable returns 1 if
unencrypted ISAKMP Notification Payloads will be accepted, else 0."
::= { endptVPN 1 }
endptAUTHTYPE OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "VPN Authentication Method. This variable returns 3 if the VPN authentication
method is Pre-Shared Key (PSK); 4 if the method is PSK with XAUTH, 5 if the method is RSA
signatures with XAUTH, 6 if the method is Hybrid XAUTH, and 7 if the method is RSA
signatures."
::= { endptVPN 2 }
endptCFGPROF OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "VPN Configuration Profile. This variable returns 2 if the VPN Configuration Profile
is based on Checkpoint Security Gateway, 3 if the profile is based on Cisco PSK with XAUTH,
5 if the profile is based on Juniper PSK with XAUTH, 6 if the profile is based on Generic PSK,
8 if the profile is based on Cisco Cert. with XAUTH, 9 if the profile is based on Juniper Cert.
with XAUTH, or 11 if the profile is based on Nortel Contivity."
::= { endptVPN 3 }
endptCOPYTOS OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "TOS Copy flag. This variable returns 1 if the value of the TOS bits will be copied
from the inner IP header to the outer IP header, else this variable returns 2 and the TOS
bits of the outer IP header will be set to 0."
::= { endptVPN 4 }
endptDHCPSRVR OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "List of DHCP server addresses. This variable returns a sequence of zero or more
IP addresses, in dotted-decimal format and separated by commas, of enterprise DHCP
servers from which configuration parameters may be requested through a VPN tunnel
via a DHCPINFORM message."
::= { endptVPN 5 }
endptDROPCLEAR OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Clear IPSec packet treatment. This variable returns 1 if received unencrypted
(clear) IPsec packets are to be dropped, else 0"
::= { endptVPN 6 }
endptENCAPS OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Encapsulation Port Numbers. This variable returns 0 if negotiation of NAT
traversal is as specified in IETF RFC 3947 (except that IKE negotiation begins with a
source port of 2070 and that source port continues to be used unless the source and
destination port numbers are changed to 4500, 1 if UDP encapsulation of the inner IP
layer will not be provided and negotiation of NAT traversal as specified in IETF RFC 3947
is not supported, 2 if negotiation of NAT traversal is as specified in IETF RFC 3947
(except IKE uses source port 2070 and the source and destination port numbers are not
subsequently changed), or 4 if negotiation of NAT traversal is as specified in IETF RFC 3947."
::= { endptVPN 7 }
endptEXTDNSSRVR OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "List of external DNS server addresses. This variable returns a sequence of IP
addresses, in dotted-decimal format and separated by commas, of DNS servers available for
use outside of the VPN tunnel when in VPN mode."
::= { endptVPN 8 }
endptEXTGIPADD OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "List of external router addresses. This variable returns a sequence of IP addresses,
in dotted-decimal format and separated by commas, of routers available for use outside of
the VPN tunnel when in VPN mode."
::= { endptVPN 9 }
endptEXTIPADD OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Endpoint External IP address. This variable returns a 4-octet string specifying the
endpoint's current outer IP address when in VPN mode."
::= { endptVPN 10 }
endptEXTNETMASK OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "External Subnet mask. This variable returns a 4-octet string specifying the subnet
mask to be used outside of the VPN tunnel when in VPN mode."
::= { endptVPN 11 }
endptIKECONFIGMODE OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IKE Configuration flag. This variable returns 1 if the ISAKMP configuration method
to be used, else 2.."
::= { endptVPN 12 }
endptIKEDH OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "In-Use Diffie-Hellman Group for IKE SA. This variable returns the negotiated IKE Phase 1
DH Group number."
::= { endptVPN 13 }
endptIKEDHGRP OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Proposed Diffie-Hellman Group for IKE SA. This variable returns 1 if the DH Group
Description proposed for IKE Phase 1 is the First Oakley Group, 2 if the proposal is for the
Second Oakley Group, 5 if the proposal is for the 1536-bit MODP Group, 14 if the proposal is
for the 2048-bit MODP Group, and 15 if the proposal is for the 3072-bit MODP Group, else 0."
::= { endptVPN 14 }
endptIKEID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IKE Phase 1 identity, This variable returns the identity (also known as in XAUTH as
group name) used during IKE Phase 1 negotiation."
::= { endptVPN 15 }
endptIKEIDTYPE OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IKE SA identification type. This varable returns 1 if the Identification Type used for
IKE Phase 1 is ID_IPV4_ADDR, 2 if the ID Type is ID_FQDN, 3 if the ID Type is ID_USER_FQDN,
9 if the ID Type is ID_DER_ASN1_DN, and 11 if the ID Type is ID_KEY_ID."
::= { endptVPN 16 }
endptIKEOVERTCP OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IKE TCP usage policy. This variable returns 0 if IKE is only to use UDP, 1 if TCP is to be
tried after an IKE times out using UDP, or 2 if only TCP is to be used."
::= { endptVPN 17 }
endptIKEP1AUTH OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "In-Use IKE Phase 1 authentication algorithm. This variable returns 1 if MD5 was negotiated,
and 2 if SHA was negotiated."
::= { endptVPN 18 }
endptIKEP1AUTHALG OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Proposed IKE Phase 1 authentication algorithm. This variable returns 0 if if either hash
algorithm is acceptable for IKE Phase 1, 1 if MD5 is proposed, or 2 if SHA is proposed:."
::= { endptVPN 19 }
endptIKEP1ENC OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "In-Use IKE Phase 1 encryption algorithm. This variable returns 1 if AES-CBC-128 was
negotiated, 2 if 3DES-CBC was negotiated, 3 if DES-CBC was negotiated, 4 if AES-CBC-192 was
negotiated, or 5 if AES-CBC-256 was negotiated."
::= { endptVPN 20 }
endptIKEP1ENCALG OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IKE Phase 1 encryption algorithm. This variable returns.0 if any encryption algoithm
is acceptable for IKE Phase 1, 1 if AES-CBC-128 is proposed, 2 if 3DES-CBC is proposed, 3 if
DES-CBC is proposed, 4 if AES-CBC-192 is proposed, and 5 if AES-CBC-256 is proposed."
::= { endptVPN 21 }
endptIKEP1LIFESEC OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IKE Security Association lifetime. This variable returns the proposed number of seconds
for the SA Life Duration for IKE Phase 1."
::= { endptVPN 22 }
endptIKEP2AUTH OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "In-Use IKE Phase 2 authentication algorithm. This variable returns 1 if MD5 was
negotiated, and 2 if SHA was negotiated."
::= { endptVPN 23 }
endptIKEP2AUTHALG OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IKE Phase 2 authentication algorithm. This variable returns 0 if either hash algorithm
is acceptable for IKE Phase 1, 1 if MD5 is proposed, or 2 if SHA is proposed:."
::= { endptVPN 24 }
endptIKEP2ENC OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "In-Use IKE Phase 2 encryption algorithm. This variable returns 1 if AES-CBC-128 was
negotiated, 2 if 3DES-CBC was negotiated, 3 if DES-CBC was negotiated, 4 if AES-CBC-192
was negotiated, 5 if AES-CBC-256 was negotiated, or 6 if NULL encryption was negotiated."
::= { endptVPN 25 }
endptIKEP2ENCALG OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IKE Phase 1 encryption algorithm. This variable returns.0 if any encryption algoithm
is acceptable for IKE Phase 1, 1 if AES-CBC-128 is proposed, 2 if 3DES-CBC is proposed, 3 if
DES-CBC is proposed, 4 if AES-CBC-192 is proposed, 5 if AES-CBC-256 is proposed, and 6 if
NULLencryption is proposed."
::= { endptVPN 26 }
endptIKEP2LIFESEC OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IPsec Security Association lifetime. This variable returns the proposed number of seconds
for the SA Life Duration for IKE Phase 2."
::= { endptVPN 27 }
endptIKESALIFEKB OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IKE Security Association KB Lifetime. This variable returns the IKE SA lifetime in kilobytes."
::= { endptVPN 28 }
endptIKESALIFESEC OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IKE Security Association time Lifetime. This variable returns the IKE SA lifetime in seconds."
::= { endptVPN 29 }
endptIKETRANSPORT OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "In-Use IKE transport protocol. This variable returns 0 if IKE is not in use, 1 if UDP is being
used for IKE transport, or 2 if TCP is being used for IKE transport."
::= { endptVPN 30 }
endptIKEXCHGMODE OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IKE Phase 1 negotiation mode. This variable returns 1 if the IKE Phase 1 exchange usesd is
Aggressive Mode, else 2 for Main Mode. "
::= { endptVPN 31 }
endptIPSECSALIFEKB OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IPsec Security Association KB Lifetime. This variable returns the IPsec SA lifetime in
kilobytes."
::= { endptVPN 32 }
endptIPSECSALIFESEC OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IPsec Security Association time Lifetime. This variable returns the IPsec SA lifetime
in seconds."
::= { endptVPN 33 }
endptIPSECSUBNET OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "VPN Tunnel IP Address ranges. This variable returns the IP address ranges that will use
the VPN tunnel, with 0.0.0.0/0 meaning all IP addresses."
::= { endptVPN 34 }
endptNORTELAUTH OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Nortel gateway authentication method. If Nortel gateway user authentication is to
be used, this variable returns 1 if a local username and password are to be used; 2 if a RADIUS
username and password are to be used, 3 if RADIUS SecurID is to be used, and 4 if RADIUS Axent
is to be used.."
::= { endptVPN 35 }
endptPFSDH OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "In-Use Diffie-Hellman Group for IPsec SA. This variable returns the negotiated IKE PFS
DH Group number."
::= { endptVPN 36 }
endptPFSDHGRP OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Diffie-Hellman Group for IPsec SA. This variable returns 1 if the DH Group Description
proposed for IPSec SA is the First Oakley Group, 2 if the proposal is for the Second Oakley Group,
5 if the proposal is for the 1536-bit MODP Group, 14 if the proposal is for the 2048-bit MODP Group,
and 15 if the proposal is for the 3072-bit MODP Group, else 0."
::= { endptVPN 37 }
endptPSWDTYPE OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "VPN Password Permissions. This variable returns 1 if the password may be alphanumeric
and is to be stored in non-volatile memory as the value of NVVPNPSWD, 2 if the password may be
alphanumeric and is to be stored in volatile memory that will be cleared when the telephone resets,
3 if the password may be numeric-only and is to be stored in volatile memory that will be cleared
mmediately after the first time the password is used (this is for use with numeric-only one-time token
devices), 4 if the password may be alphanumeric and is to be stored in volatile memory that will be
cleared immediately after the first time the password is used, and 5 if the password may be
alphanumeric and is to be stored in volatile memory that is cleared when the user invokes VPN
Sleep Mode and when the telephone resets."
::= { endptVPN 38 }
endptSGINUSE OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "VPN Security Gateway address. This variable returns a 4-octet string specifying the IP
address of the VPN Security Gateway in use, else 0.0.0.0."
::= { endptVPN 39 }
endptSGIP OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "VPN Security Gateway list. This variable returns the list of VPN security gateway IP
addresses available to the telephone."
::= { endptVPN 40}
endptSGVENDOR OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "VPN Security Gateway Vendor. This variable returns 1 if the IKE implementation matches
Juniper/NetScreen, 2 if it matches Cisco, 3 if it matches Check Point/Nokia, 5 if it matches
Nortel, otherwise 4."
::= { endptVPN 41 }
endptSGVERSION OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Security Gateway Version. This variable returns the version information, if any,
of the Security Gateway with wich the telephone has a VPN tunnel established, else NULL."
::= { endptVPN 42 }
endptVPNMODE OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "VPN Support Specification. This variable returns 1 if VPN functionality is enabled, else 0."
::= { endptVPN 43 }
endptVPNUSER OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "VPN User Name. This variable returns the user name to be used during authentication. "
::= { endptVPN 44 }
endptVPNUSERTYPE OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "VPN User Name Permissions. This variable returns 1 if the user can change the VPN username,
else 0."
::= { endptVPN 45 }
endptXAUTH OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "XAUTH status. This variable returns 2 if XAUTH is disabled, else 1."
::= { endptVPN 46 }
END

Get latest updates about Open Source Projects, Conferences and News.

Sign up for the SourceForge newsletter:

JavaScript is required for this form.





No, thanks