--- a
+++ b/avaya/46xxmib28.txt
@@ -0,0 +1,1836 @@
+Avaya-46xxIPTelephone-MIB 
+DEFINITIONS ::= BEGIN     
+IMPORTS
+        	enterprises, OBJECT-TYPE, MODULE-IDENTITY, Integer32, IpAddress
+                FROM SNMPv2-SMI 
+   		DisplayString 
+		FROM RFC1213-MIB ;
+
+endpointMIB MODULE-IDENTITY
+	     	LAST-UPDATED     "0612052000Z"
+    		 ORGANIZATION     "avaya"
+        		CONTACT-INFO     "Avaya Customer Services
+				Avaya, Inc.
+				211 Mt. Airy Road
+				Basking Ridge, NJ 07920 USA
+
+    	                        WWW: www.avaya.com
+
+        	                  Tel: +1 908 953 6000"
+	      DESCRIPTION "MIB Module for 46xx IP Telephones through Release 2.8
+				in accordance with 46xx Common Requirements COMPAS 75441, Issue 2.8.
+				Copyright 2006 by Avaya Inc.  All rights reserved."
+	            ::= { avayaipEndpointMIBs 1 }
+
+avaya           		OBJECT IDENTIFIER ::= { enterprises 6889 }
+avayaProducts  			OBJECT IDENTIFIER ::= { avaya 1 }
+avayaMibs            		OBJECT IDENTIFIER ::= { avaya 2 }
+avayaipEndpointProd    	OBJECT IDENTIFIER ::= { avayaProducts 69 }
+avayaipEndpointMIBs  	OBJECT IDENTIFIER ::= { avayaMibs 69 }
+
+endptID         OBJECT IDENTIFIER ::= { endpointMIB 1 }
+endptMARKET     OBJECT-TYPE
+                    SYNTAX      DisplayString
+                    MAX-ACCESS  read-only
+                    STATUS      obsolete
+                    DESCRIPTION "ID designation. This variable returns a 
+		string specifying 'domestic' or 'export'."
+                    ::= { endptID 1 }
+endptMODEL      OBJECT-TYPE
+                    SYNTAX      DisplayString
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Model identifier. This variable returns 
+		a string of up to 8 ASCII characters."
+                    ::= { endptID 2 }
+endptMCIPADD    OBJECT-TYPE                   
+                    SYNTAX      DisplayString                   
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "List of call server addresses.  This 
+		variable returns a sequence of IP addresses, in 
+		dotted-decimal orDNS format and separated by  
+		commas, of call server IP addresses available 
+                        for use."
+                    ::= { endptID 3 }
+endptMCIPINUSE    OBJECT-TYPE
+                    SYNTAX      IpAddress
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Call server address.  This variable 
+                        returns a 4-octet string specifying the IP 
+                        address of the call server currently in use."
+                    ::= { endptID 4 }
+endptMCPORT     OBJECT-TYPE
+                    SYNTAX      INTEGER 
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Transport layer port number. This 
+		variable returns an integer specifying the  
+		port number in use by the current call server." 
+                    ::= { endptID 5 }
+endptPHONESN    OBJECT-TYPE
+                    SYNTAX      DisplayString
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Housing serial number. This variable 
+		returns a string of up to 18 ASCII characters, 
+		specifying the serial number on the outside 
+                        of the endpoint's housing."
+                    ::= { endptID 6 }
+endptPWBCC      OBJECT-TYPE
+                    SYNTAX      DisplayString
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "PWB comcode. This variable returns  
+                        a string of up to 9 numerical characters, 
+                        specifying the comcode or version number of 
+                        the printed wiring board of the endpoint."
+                    ::= { endptID 7 }
+endptPWBSN      OBJECT-TYPE
+                    SYNTAX      DisplayString
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "PWB serial number. This variable 
+		returns a string of up to 18 ASCII characters, 
+		specifying the serial number on the endpoint's 
+		printed wiring board, or N/A if the board has 
+                        no serial number."
+                    ::= { endptID 8 }
+endptETHERADD   OBJECT-TYPE
+                    SYNTAX      OCTET STRING
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "MAC address. This variable returns  
+                        a 6-octet string specifying the endpoint's
+                        MAC address."
+                    ::= { endptID 9 }
+endptESPEED     OBJECT-TYPE
+                    SYNTAX      DisplayString
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Ethernet interface speed. This variable 
+		returns a string specifying the endpoint's Ethernet
+		interface speed in Mbps: '100', '10', or '0'."
+                    ::= { endptID 10 }
+endptIPADD      OBJECT-TYPE
+                    SYNTAX      IpAddress
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "IP address. This variable returns a 
+		4-octet string specifying the endpoint's current 
+                        IP address."
+                    ::= { endptID 11 }
+endptDHCPLEASETIME      OBJECT-TYPE
+                    SYNTAX      Integer32
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Duration of IPADD lease. This variable 
+                        returns an unsigned integer specifying the length 
+                        of time of the IPADD lease, in seconds as received 
+                        by DHCP option 51."
+                    ::= { endptID 12 }
+endptDHCPLEASERENEW     OBJECT-TYPE
+                    SYNTAX      Integer32
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Renewal time of IPADD lease. This 
+                        variable returns an unsigned integer specifying 
+                        the length of time at which to renew the IPADD 
+				lease, in seconds as received by DHCP option 58."
+                    ::= { endptID 13 }
+endptDHCPLEASEREBIND     OBJECT-TYPE
+                    SYNTAX      Integer32
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Rebind time of IPADD lease. This 
+                        variable returns an unsigned integer specifying 
+                        the length of time at which to rebind the IPADD 
+		lease, in seconds as received by DHCP option 59."
+                    ::= { endptID 14 }
+endptGIPADD     OBJECT-TYPE
+                    SYNTAX      DisplayString
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "List of router addresses.  This variable 
+		returns a sequence of IP addresses, in  
+		dotted-decimal format and separated by commas, 
+                      	of routers available for use."
+                    ::= { endptID 15 }
+endptGIPINUSE       OBJECT-TYPE
+                    SYNTAX      IpAddress
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Router address.  This variable returns  
+                        a 4-octet string specifying the IP address of 
+                        the router currently in use."
+                    ::= { endptID 16 }
+endptNETMASK        OBJECT-TYPE
+                    SYNTAX      IpAddress
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Subnet mask. This variable returns a  
+                        4-octet string specifying the subnet mask 
+                        currently in use."
+                    ::= { endptID 17 }
+endptTFTPDIR    OBJECT-TYPE
+                    SYNTAX      DisplayString
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "TFTP server path name. This variable 
+                        returns a string of 0-127 ASCII characters, 
+                        specifying the path name currently prepended 
+                        to file names used in TFTP read operations."
+                    ::= { endptID 18 }
+endptTFTPSRVR   OBJECT-TYPE
+                    SYNTAX      DisplayString
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "List of TFTP server addresses.  This 
+		variable returns a sequence of IP addresses, 
+		in dotted-decimal orDNS format and separated 
+		by commas, of TFTP servers available for use."
+                    ::= { endptID 19 }
+endptTFTPINUSE      OBJECT-TYPE
+                    SYNTAX      IpAddress
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "TFTP server address.  This variable 
+                        returns a 4-octet string specifying the IP 
+                        address of the TFTP server currently in use 
+		(or all zeroes if no server used successfully 
+                        during initialization)."
+                    ::= { endptID 20 }
+endptBOOTNAME       OBJECT-TYPE
+                    SYNTAX      DisplayString
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Boot code file ID. This variable 
+                        returns a string specifying the boot code 
+                        file used to initiate telephone operation."
+                    ::= { endptID 21 }
+endptAPPNAME    OBJECT-TYPE
+                    SYNTAX      DisplayString
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Application file ID. This variable 
+                        returns a string specifying the system-specific 
+                        application file that should be used for
+                        telephone operation."
+                    ::= { endptID 22 }
+endptSSON       OBJECT-TYPE
+                    SYNTAX      INTEGER 
+                    MAX-ACCESS  read-only
+                    STATUS      obsolete
+                    DESCRIPTION "Site-specific option number (SSON). This 
+                        variable returns an integer between 128 and 254 
+                        inclusive, specifying the SSON in use.  The
+                        default is 176."
+                    ::= { endptID 23 }
+endptBBURST     OBJECT-TYPE
+                    SYNTAX      INTEGER  
+                    MAX-ACCESS  read-only
+                    STATUS      obsolete
+                    DESCRIPTION "Blackburst flag. This variable returns 0
+                        if Blackburst is currently OFF, else 1."
+                    ::= { endptID 24 }
+endptHUBSTAT    OBJECT-TYPE
+                    SYNTAX      INTEGER  
+                    MAX-ACCESS  read-only
+                    STATUS      obsolete
+                    DESCRIPTION "Hub flag. This variable has been superseded 
+                        by endptPHY2STAT."
+                    ::= { endptID 25 }
+endptDSCPAUD    OBJECT-TYPE
+                    SYNTAX      INTEGER  
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "DSCP for audio. This variable specifies the
+                        Differentiated Services Code Point for audio 
+                        currently in use (between 0 and 63 inclusive)."
+                    ::= { endptID 26 }
+endptDSCPSIG    OBJECT-TYPE
+                    SYNTAX      INTEGER  
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION " DSCP for signaling. This variable specifies 
+                        the Differentiated Services Code Point for signaling 
+                        currently in use (between 0 and 63 inclusive)."
+                    ::= { endptID 27 }
+endptL2Q        OBJECT-TYPE
+                    SYNTAX      INTEGER  
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "802.1Q framing flag. This variable returns 0 
+		if the Layer 2 802.1Q framing parameter is set to 
+		'auto', 1 if it is set to on/enabled, else 2 for
+                        off/disabled."
+                    ::= { endptID 28 }
+endptL2QAUD     OBJECT-TYPE
+                    SYNTAX      INTEGER  
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Audio priority. This variable returns an 
+                        integer between 0 and 7 inclusive specifying the 
+                        current Layer 2 802.1Q audio priority value."
+                    ::= { endptID 29 }
+endptL2QSIG     OBJECT-TYPE
+                    SYNTAX      INTEGER  
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Signaling priority. This variable returns 
+                        an integer between 0 and 7 inclusive specifying the 
+                        current Layer 2 802.1Q signaling priority value."
+                    ::= { endptID 30 }
+endptL2QVLAN    OBJECT-TYPE
+                    SYNTAX      INTEGER 
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Telephone VLAN Identifier. This variable returns 
+                        an integer between 0 and 4094 inclusive specifying the 
+                        current Layer 2 802.1Q VLAN Identifier value."
+                    ::= { endptID 31 }
+endpt46XXUPGR   OBJECT-TYPE
+                    SYNTAX      DisplayString
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Upgrade script ID. This variable returns
+                        a string of up to 16 ASCII characters specifying 
+                        the name of the upgrade script retrieved by TFTP 
+                        after the most recent power-up or reset."
+                    ::= { endptID 32 }
+endptDNSSRVR   OBJECT-TYPE
+                    SYNTAX      DisplayString
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "List of DNS server addresses.  This variable 
+		returns a sequence of IP addresses, in dotted-decimal 
+		format and separated by commas, of DNS servers 
+		available for use."
+                    ::= { endptID 33 }
+endptDNSINUSE  OBJECT-TYPE
+                    SYNTAX      IpAddress
+                    MAX-ACCESS  read-only
+                    STATUS      obsolete
+                    DESCRIPTION "DNS server address.  This variable returns a 
+                        4-octet string specifying the IP address of the DNS
+                        server currently in use."
+                    ::= { endptID 34 }
+endptDOMAIN    OBJECT-TYPE
+                    SYNTAX      DisplayString
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "List of DNS domain labels.  This variable 
+		returns a sequence of labels, separated by periods, for
+                        use as the highest-level domain in resolving DNS names
+		in system values."
+                    ::= { endptID 35 }
+endptRTCPMON  OBJECT-TYPE
+                    SYNTAX      IpAddress
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "RTCP Monitor address.  This variable returns a 
+                        4-octet string specifying the IP address of the RTCP
+                        monitor currently in use."
+                    ::= { endptID 36 }
+endptPHY2STAT    OBJECT-TYPE
+                    SYNTAX      INTEGER  
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Secondary Ethernet interface setting.  This 
+		variable returns 0 if the endpoint's secondary Ethernet 
+		interface is currently NOT enabled (or none exists), 1  
+		if the hub is setfor auto-negotiation, 2 for 10Mbps 
+		half-duplex, 3 for 10Mbps full-duplex, 4 for 100Mbps 
+		half-duplex, and 5 for 100Mbps full-duplex."
+                    ::= { endptID 37 }
+endptIRSTAT    OBJECT-TYPE
+                    SYNTAX      INTEGER  
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "IR Interface flag. This variable returns 0 
+                        if the endpoint's IR interface is currently NOT enabled,
+                        else 1."
+                    ::= { endptID 38 }
+endptSMTPSRVR    OBJECT-TYPE
+                    SYNTAX      DisplayString
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "SMTP server IP addresses.  This variable 
+				returns a comma-separated list of SMTP server IP 
+				addresses available for use, in dotted-decimal
+                        or DNS format."
+                    ::= { endptID 39 }
+
+endptDSPVERSION  OBJECT-TYPE
+                    SYNTAX      DisplayString
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "DSP Version.  This variable returns a string 
+				of up to 10 characters, that identifies the version of 
+				the DSP firmware in the endpoint."
+                    ::= { endptID 40 }
+endptLOGSRVR   OBJECT-TYPE
+                    SYNTAX      DisplayString
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Event Log server address.  This variable 
+				returns at most one IP address, in dotted-decimal 
+				or DNS format, of the server to be used for event 
+				logging.  This function is intended for Avaya use,
+                        in debugging if necessary."
+                    ::= { endptID 41 }
+endptLOGSTAT    OBJECT-TYPE
+                    SYNTAX      INTEGER  
+                    MAX-ACCESS  read-only
+                    STATUS      obsolete
+                    DESCRIPTION "Event Log flag. This variable returns 0 if   
+                        the endpoint's event logging capability is currently 
+                        NOT enabled, else 1.  This function is intended for 
+		Avaya use, in debugging if necessary."
+                    ::= { endptID 42 }
+endptAGCHAND   OBJECT-TYPE
+                    SYNTAX      INTEGER  
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Handset AGC status. This variable returns 1  
+                        if the endpoint's handset Automatic Gain Control 
+                        capability is currently enabled, else 0."
+                    ::= { endptID 43 }
+endptAGCHEAD   OBJECT-TYPE
+                    SYNTAX      INTEGER  
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Headset AGC status. This variable returns 1 
+                        if the endpoint's headset Automatic Gain Control 
+                        capability is currently enabled, else 0."
+                    ::= { endptID 44 }
+endptPHY1STAT    OBJECT-TYPE
+                    SYNTAX      INTEGER  
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Ethernet line interface status.  This 
+		variable returns 0 if the endpoint's Ethernet line 
+		interface is currently NOT enabled, 1 if the Ethernet 
+		line interface is currently for auto-negotiation, 2 for 
+		10Mbps half-duplex, 3 for 10Mbps full-duplex, 4 for 
+		100Mbps half-duplex, and 5 for 100Mbps full-duplex."
+                    ::= { endptID 45 }
+endptL2QSTAT     OBJECT-TYPE
+                    SYNTAX      INTEGER  
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "802.1Q tagging flag. This variable returns 0  
+                        if the Layer 2 802.1Q tagging parameter is currently
+                        OFF, else 1." 
+                    ::= { endptID 46 }
+endptVLANTEST    OBJECT-TYPE
+                    SYNTAX      INTEGER  
+                    MAX-ACCESS  read-only
+                    STATUS      obsolete
+                    DESCRIPTION "VLAN pause parameter. This variable returns 
+                        the number of seconds for the endpoint to wait for a 
+				DHCPOFFER message when using a non-zero VLAN ID.  Valid 
+				values are integers from 0 to 999 inclusive."
+                    ::= { endptID 47 }
+endptPHONECC     OBJECT-TYPE
+                    SYNTAX      DisplayString
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Phone comcode. This variable returns a string 
+				of up to 9 numerical characters, specifying the comcode
+                        of the endpoint itself." 
+                    ::= { endptID 48 }
+endptVLANLIST    OBJECT-TYPE
+                    SYNTAX      DisplayString
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "VLAN ID list. This variable returns a list of  
+                        zero or more VLAN IDs."
+                    ::= { endptID 49}
+endptAGCSPKR    OBJECT-TYPE
+                    SYNTAX      INTEGER  
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Speakerphone AGC status. This variable returns 
+                        1 if the endpoint's speakerphone Automatic Gain Control 
+                        capability is currently enabled, else 0."
+                    ::= { endptID 50}
+endptHTTPSRVR    OBJECT-TYPE
+                    SYNTAX      DisplayString
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "HTTP server IP addresses.  This variable 
+				returns a comma-separated list of HTTP server IP 
+				addresses available  for use, in dotted-decimal or 
+                        DNS format."
+                    ::= { endptID 51}
+endptHTTPDIR    OBJECT-TYPE
+                    SYNTAX      DisplayString
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "HTTP server Directory.  This variable returns 
+				the path used in formation of the URI for HTTP GET 
+                        operations."
+                    ::= { endptID 52}
+endptHTTPPORT   OBJECT-TYPE
+                    SYNTAX      INTEGER  
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "HTTP TCP port number.  This variable returns  
+				the TCP port number used by HTTP during initialization."
+                    ::= { endptID 53}
+endptHTTPUSED   OBJECT-TYPE
+                    SYNTAX      OCTET STRING
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "HTTP initialization server IP address.  This 
+				variable returns a 4-octet IP address for the HTTP server 
+				used during initialization (all zeroes if no server 
+				successfully used during initialization)."
+                    ::= { endptID 54}
+endptPROCSTAT   OBJECT-TYPE
+                    SYNTAX      INTEGER  
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Local Procedure flag. This variable returns 0 if 
+                        Local Procedures are currently allowed for this telephone,
+                        else 1."
+                    ::= { endptID 55 }
+endptPROCPSWD   OBJECT-TYPE
+                    SYNTAX      INTEGER
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Local Procedure Password. This variable returns
+                        0 if the Local Procedure Password is null, else 1."
+                    ::= { endptID 56 }
+endptSIG	OBJECT-TYPE
+                    SYNTAX      INTEGER  
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Signaling protocol download flag. This variable 
+                        returns the integer corresponding to the current
+                        signaling protocol."
+                    ::= { endptID 57 }
+endptGROUP	OBJECT-TYPE
+                    SYNTAX      INTEGER  
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Group identifier. This variable returns the 
+                        integer corresponding to the current group identifier."
+                    ::= { endptID 58 }
+endptSNMPADD    OBJECT-TYPE
+                    SYNTAX      DisplayString
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "SNMP source addresses. This variable returns 
+				one or more allowable source IP addresses for SNMP queries, 
+                        in dotted decimal or DNS format."
+                    ::= { endptID 59 }
+endptCODESRVR    OBJECT-TYPE
+                    SYNTAX      DisplayString
+                    MAX-ACCESS  read-only
+                    STATUS      obsolete
+                    DESCRIPTION "HTTP server addresses. This variable returns 
+				zero or more HTTP server addresses for software download, 
+                        in dotted decimal or DNS format."
+                    ::= { endptID 60 }
+endptCODEUSED    OBJECT-TYPE
+                    SYNTAX      OCTET STRING
+                    MAX-ACCESS  read-only
+                    STATUS      obsolete
+                    DESCRIPTION "HTTP server address used. This variable 
+				returns the HTTP server address from CODESRVR used, 
+				if any, during initialization, or all zeroes if no HTTP
+                        server was used."
+                    ::= { endptID 61 }
+endptSTATIC	OBJECT-TYPE
+                    SYNTAX      INTEGER  
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Static programming override flag. This variable 
+                        returns the integer corresponding to the current level of
+				 override permissions for static programming."
+                    ::= { endptID 62 }
+endptTLSSRVR    OBJECT-TYPE
+                    SYNTAX      DisplayString
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "TLS server addresses. This variable returns zero 
+				or more Transport Layer Security server addresses for
+                        software download, in dotted decimal or DNS format."
+                    ::= { endptID 63 }
+endptTLSUSED    OBJECT-TYPE
+                    SYNTAX      OCTET STRING
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "TLS server address used. This variable returns the
+				TLS server address from TLSSRVR used, if any, during 
+				initialization, or all zeroes if no TLS server was used."
+                    ::= { endptID 64 }
+endptCNAPORT    OBJECT-TYPE
+                    SYNTAX      INTEGER
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Chatter server port. This variable returns the 
+				Chatter server registration transport-layer port number 
+				(from 0 to 65535; default is 8888)."
+                    ::= { endptID 65 }
+endptCNASRVR    OBJECT-TYPE
+                    SYNTAX      DisplayString
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "CNA server addresses. This variable returns zero 
+				or more Chatter server addresses for network analysis, in 
+				dotted decimal or DNS format."
+                    ::= { endptID 66 }
+endptDSTOFFSET  OBJECT-TYPE
+                    SYNTAX      DisplayString
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Daylight Savings Time Offset. This variable 
+				returns the offset in local time for Daylight Savings Time.  
+				Currently used in SIP phones."
+                    ::= { endptID 67 }
+endptDSTSTART   OBJECT-TYPE
+                    SYNTAX      DisplayString
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Daylight Savings Time Start. This variable returns 
+				the first day or date Daylight Savings Time is effective.  
+				Currently used in SIP phones."
+                    ::= { endptID 68 }
+endptDSTSTOP    OBJECT-TYPE
+                    SYNTAX      DisplayString
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Daylight Savings Time Stop. This variable returns 
+		the first day or date after Daylight Savings Time is over.  
+		Currently used in SIP phones."
+                    ::= { endptID 69 }
+endptGMTOFFSET  OBJECT-TYPE
+                    SYNTAX      DisplayString
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Greenwich Mean Time Offset. This variable returns 
+		the offset in local time for Greenwich Mean Time.  Currently 
+		used in SIP phones."
+                    ::= { endptID 70 }
+endptSNTPSRVR   OBJECT-TYPE
+                    SYNTAX      DisplayString
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "SNTP server addresses. This variable returns zero 
+		or more SNTP server addresses for obtaining time data, in 
+		dotted decimal or DNS format.  Currently used in SIP phones."
+                    ::= { endptID 71 }
+endptBAKLIGHTOFF OBJECT-TYPE
+                    SYNTAX      INTEGER
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Backlight idle timer setting. This variable returns 
+		the number of minutes of idle time, after which the 
+		telephone backlightis turned off. Range is 0-999, with a 
+		default of 120.  Used in phones with backlit displays."                        
+                    ::= { endptID 72 }
+endptDOT1X      OBJECT-TYPE
+                    SYNTAX      INTEGER
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Current value for 802.1X handling. This variable returns 
+		0 if the telephone supports unicast Supplicant operation only,
+                        with PAE multicast pass-through without proxy Logoff, 1 if the 
+                        same as 0 but with proxy Logoff, and 2 if Unicast both unicast
+                        or Multicast Supplicant operation, without PAE multicast pass-
+                        through, is supported.  The default is 0." 
+                    ::= { endptID 73 }
+endptAUDIOENV    OBJECT-TYPE
+                    SYNTAX      INTEGER
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Audio environment selection index.  This variable returns 
+		the current setting from the audio environment table (from 0 to 107,
+		default is 0)."
+                    ::= { endptID 74}
+endptAUDIOSTHD    OBJECT-TYPE
+                    SYNTAX      INTEGER
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Audio headset sidetone setting.  This variable returns the 
+		current setting (0, 1, or 2; default is 0)."
+                    ::= { endptID 75}
+endptAUDIOSTHS    OBJECT-TYPE
+                    SYNTAX      INTEGER
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Audio handset sidetone setting.  This variable returns the 
+		current setting (0, 1, or 2; default is 0)."
+                    ::= { endptID 76}
+endptDHCPINUSE      OBJECT-TYPE
+                    SYNTAX      IpAddress
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "DHCP server address.  This variable returns a 4-octet string 
+		specifying the IP address of the DHCP server from which the
+		telephone's IP address was obtained (or all zeroes if the telephone
+		was statically addressed)."
+                    ::= { endptID 77}
+endptDHCPLEASEEXP     OBJECT-TYPE
+                    SYNTAX      Integer32
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Remaining time of IPADD lease. This 
+                        	variable returns an unsigned integer specifying 
+                        	the length of time in seconds until the expiration of the IP
+		address lease, or 0 if the lease has expired."
+                    ::= { endptID 78}
+endptDHCPSTD    OBJECT-TYPE
+                    SYNTAX      INTEGER
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "DHCP lease violation flag.  This variable returns 
+		1 if the telephone is not allowed to use the IP address after
+		its lease has expired, or else 0 if the telephone is allowed to
+		continue operating after the IP address lease has expired.)."
+                    ::= { endptID 79}
+endptDHCPT1REM     OBJECT-TYPE
+                    SYNTAX      Integer32
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Remaining time until IP address lease renewal. This 
+                        	variable returns an unsigned integer specifying the length of 
+		time in seconds until the start of the IP
+		address lease renewal, or 0 if the lease has expired."
+                    ::= { endptID 80}
+endptDHCPT2REM     OBJECT-TYPE
+                    SYNTAX      Integer32
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Remaining time until IP address lease renewal. This 
+                        	variable returns an unsigned integer specifying the length of 
+		time in seconds until the start of the IP address lease 
+		rebindingl, or 0 if the lease has expired."
+                    ::= { endptID 81}
+endptICMPDU    OBJECT-TYPE
+                    SYNTAX      INTEGER
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "ICMP Destination support setting.  This variable returns 
+		2 if the telephone transmits Destination Unreachable messages with
+		code 2 if the designated transport protocol is not supported AND also
+		if the telephone transmits Destination Unreachable messages with
+		code 3 if a closed UD/TCP port is designated.
+
+		This variable returns 1 if the telephone only transmits Destination Unreachable 
+		messages with code 3 if a closed UD/TCP port is designated.
+
+		This variable returns 0 if the telephone does not transmit Destination 
+		Unreachable messages."
+                    ::= { endptID 81}
+endptICMPRED    OBJECT-TYPE
+                    SYNTAX      INTEGER
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "ICMP Redirect support setting.  This variable returns 1 if the telephone 
+		supports received Redirect messages as specified in RFC 1122, Sections
+		3.2.2.2 and 3.3.1.2, or 0 if the telephone does not provide this support."
+                    ::= { endptID 82}
+endptSSONCONTENT    OBJECT-TYPE
+                    SYNTAX      DisplayString
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Contents of DHCP Site Specific Option Number.  This variable returns
+		the data portion of the DHCP SSON as designated by endptNVSSON."
+                    ::= { endptID 83}
+endptBRURI      OBJECT-TYPE
+                    SYNTAX      DisplayString
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Backup and restore URI. This variable returns 
+		a string specifying the URI used for backup and restore files."      
+  	  ::= { endptID 84}
+
+endptNVM        OBJECT IDENTIFIER ::= { endpointMIB 2 }
+endptNVMCIPADD  OBJECT-TYPE
+                    SYNTAX      DisplayString
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "IP address of call server stored in Non-Volatile 
+                        Memory (NVM). This variable returns a 4-octet string or 
+                        DNS string.  Default is AvayaCallServer."
+                    ::= { endptNVM 1 }
+endptNVMCPORT   OBJECT-TYPE
+                    SYNTAX      INTEGER 
+                    MAX-ACCESS  read-only
+                    STATUS      obsolete
+                    DESCRIPTION "NVM Transport layer port number. This variable 
+                        returns an integer specifying the call server port number
+                        stored in NVM."
+                    ::= { endptNVM 2 }
+endptNVIPADD    OBJECT-TYPE
+                    SYNTAX      DisplayString
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "NVM IP address. This variable returns a 4-octet
+                        string specifying the endpoint's IP address stored in
+                        NVM."
+                    ::= { endptNVM 3 }
+endptNVGIPADD   OBJECT-TYPE
+                    SYNTAX      DisplayString
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "NVM Router address.  This variable returns a 4-
+                        octet string specifying the IP address of the router as
+                        stored in NVM."
+                    ::= { endptNVM 4 }
+endptNVNETMASK  OBJECT-TYPE
+                    SYNTAX      DisplayString
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "NVM Subnet mask. This variable returns a 4-octet 
+                        string specifying the subnet mask as stored in NVM."
+                    ::= { endptNVM 5 }
+endptNVTFTPSRVR OBJECT-TYPE
+                    SYNTAX      DisplayString
+                    MAX-ACCESS  read-only
+                    STATUS      obsolete
+                    DESCRIPTION "NVM TFTP server address. This variable returns
+                        a 4-octet string specifying the IP address of the file 
+                        server as stored in NVM.  The default is AvayaTFTPserver."
+                    ::= { endptNVM 6 }
+endptNVSSON     OBJECT-TYPE
+                    SYNTAX      INTEGER 
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "NVM Site-specific option number. This variable 
+                        returns an integer between 128 and 254 inclusive,
+                        specifying the SSON stored in NVM.  The default is 176."
+                    ::= { endptNVM 7 }
+endptNVBBURST   OBJECT-TYPE
+                    SYNTAX      INTEGER  
+                    MAX-ACCESS  read-only
+                    STATUS      obsolete
+                    DESCRIPTION "NVM Blackburst flag. This variable returns 0
+                         if the Blackburst parameter in NVM is OFF, else 1."
+                    ::= { endptNVM 8 }
+endptNVHUBSTAT  OBJECT-TYPE
+                    SYNTAX      INTEGER  
+                    MAX-ACCESS  read-only
+                    STATUS      obsolete
+                    DESCRIPTION "NVM Hub flag. This variable has been superseded 
+                        by endptNVPHY2STAT."
+                    ::= { endptNVM 9 }
+endptNVDSCPAUD  OBJECT-TYPE
+                    SYNTAX      INTEGER  
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "NVM DSCP for audio. This variable specifies the
+                        Differentiated Services Code Point for audio stored 
+                        in NVM (integer between 0 and 63 inclusive)."
+                    ::= { endptNVM 10 }
+endptNVDSCPSIG  OBJECT-TYPE
+                    SYNTAX      INTEGER  
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION " NVM DSCP for signaling. This variable specifies 
+                        the Differentiated Services Code Point for signaling 
+                        stored in NVM (integer between 0 and 63 inclusive)."
+                    ::= { endptNVM 11 }
+endptNVL2Q      OBJECT-TYPE
+                    SYNTAX      INTEGER  
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "NVM 802.1Q flag. This variable returns 0 if 
+				the Layer 2 802.1Q framing parameter in NVM is set to  
+				'auto', 1 if it is set to on/enabled, else 2 for
+                        off/disabled."
+                    ::= { endptNVM 12 }
+endptNVL2QAUD   OBJECT-TYPE
+                    SYNTAX      INTEGER  
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "NVM Audio priority. This variable returns an 
+                        integer between 0 and 7 inclusive specifying the Layer 2 
+                        802.1Q audio priority value stored in NVM."
+                    ::= { endptNVM 13 }
+endptNVL2QSIG   OBJECT-TYPE
+                    SYNTAX      INTEGER  
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "NVM Signaling priority. This variable returns an 
+                        integer between 0 and 7 inclusive specifying the Layer 2
+                        802.1Q signaling priority value stored in NVM."
+                    ::= { endptNVM 14 }
+endptNVL2QVLAN  OBJECT-TYPE
+                    SYNTAX      INTEGER  
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "NVM VLAN Identifier. This variable returns an 
+                        integer between 0 and 4094 inclusive specifying the Layer
+                        2 802.1Q VLAN Identifier value stored in NVM."
+                    ::= { endptNVM 15 }
+endptNVPHY2STAT  OBJECT-TYPE
+                    SYNTAX      INTEGER  
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "NVM Secondary Ethernet interface setting.  This 
+				variable returns 0 if the endpoint's secondary Ethernet 
+				interface in NVM is currently NOT enabled(or none exists), 
+				1 if the hub is set for auto-negotiation, 2 for 10Mbps 
+				half-duplex, 3 for 10Mbps full-duplex, 4 for 100Mbps
+                        half-duplex, and 5 for 100Mbps full-duplex."
+                    ::= { endptNVM 16 }
+endptNVLOGSTAT    OBJECT-TYPE
+                    SYNTAX      INTEGER  
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "NVM Event Log flag. This variable returns 0 if the 
+                        endpoint's event logging capability in NVM is currently 
+                        NOT enabled, else 1."
+                    ::= { endptNVM 17 }
+endptNVAGCHAND   OBJECT-TYPE
+                    SYNTAX      INTEGER  
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "NVM Handset AGC status. This variable returns 1  
+                        if the endpoint's handset Automatic Gain Control capability 
+				in NVM is currently enabled, else 0."
+                    ::= { endptNVM 18}
+endptNVAGCHEAD   OBJECT-TYPE
+                    SYNTAX      INTEGER  
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "NVM Headset AGC status. This variable returns 1 
+                        if the endpoint's headset Automatic Gain Control capability 
+				in NVM is currently enabled, else 0."
+                    ::= { endptNVM 19}
+endptNVIRSTAT    OBJECT-TYPE
+                    SYNTAX      INTEGER  
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "NVM IR Interface flag. This variable returns 0 
+                        if the endpoint's IR interface capability in NVM is 
+				currently NOT enabled, else 1."
+                    ::= { endptNVM 20}
+endptNVPHY1STAT    OBJECT-TYPE
+                    SYNTAX      INTEGER  
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "NVM Ethernet line interface status.  This 
+                        variable returns 0 if the endpoint's Ethernet line 
+                        interface in NVM iscurrently NOT enabled, 1 if the 
+                        Ethernet line interface in NVM is currently for 
+                        auto-negotiation, 2 for 10Mbps half-duplex, 3 for 
+                        10Mbps full-duplex, 4 for 100Mbps half-duplex, and
+                        5 for 100Mbps full-duplex."
+                    ::= { endptNVM 21}
+endptNVVLANTEST    OBJECT-TYPE
+                    SYNTAX      INTEGER  
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "NVM VLAN pause parameter. This variable returns 
+                        the number of seconds stored in NVM for the endppoint to 
+                        wait for a DHCPOFFER message when using a non-zero VLAN ID.  
+                        Valid values are integers from 0 to 999 inclusive."
+                    ::= { endptNVM 22 }
+endptNVVLANLIST    OBJECT-TYPE
+                    SYNTAX      DisplayString
+                    MAX-ACCESS  read-only
+                    STATUS      obsolete
+                    DESCRIPTION "NVM VLAN ID list. This variable returns a list 
+                        of zero or more VLAN IDs in NVM."
+                    ::= { endptNVM 23}
+endptNVAGCSPKR    OBJECT-TYPE
+                    SYNTAX      INTEGER  
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Speakerphone AGC status. This variable returns 1 
+                        if the endpoint's speakerphone Automatic Gain Control 
+                        capability in NVM is currently enabled, else 0."
+                    ::= { endptNVM 24}
+endptNVHTTPSRVR   OBJECT-TYPE
+                    SYNTAX      DisplayString
+                    MAX-ACCESS  read-only
+                    STATUS      obsolete
+                    DESCRIPTION "NVM HTTP server IP addresses.  This variable 
+				returns a comma-separated list of HTTP server IP 
+				addresses available for use as stored in NVM, in
+                        dotted-decimal format."
+                    ::= { endptNVM 25}
+endptNVAUTH      OBJECT-TYPE
+                    SYNTAX      INTEGER  
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Script file authentication flag. This variable 
+				returns 1 if the endpoint must authenticate script files,
+                        else 0."
+                    ::= { endptNVM 26}
+endptNVFILESRVR OBJECT-TYPE
+                    SYNTAX      DisplayString
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "NVM File server address. This variable returns
+                        a 4-octet string specifying the IP address of the file 
+                        server as stored in NVM."
+                    ::= { endptNVM 27 }
+endptNVALERT    OBJECT-TYPE
+                    SYNTAX      INTEGER  
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Alerting Mode flag. This variable returns 1 if 
+				the alerting mode setting in non-volatile memory is 
+				enabled, else 0."
+                    ::= { endptNVM 28}
+endptNVCHADDR    OBJECT-TYPE
+                    SYNTAX      Integer32
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Manually-entered DHCP chaddr value. This 
+				variable returns a manually-entered value for the DHCP 
+				chaddr field as stored in non-volatile memory, if any. 
+				A Hexadecimal value with range of 0 (the default) to
+                        999999."
+                    ::= { endptNVM 29}
+endptNVCONTRAST    OBJECT-TYPE
+                    SYNTAX      INTEGER  
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Display Contrast setting. This variable returns 
+				the value of the display contrast setting in non-volatile 
+				memory.  Range is 0-15, with 8 the default."
+                    ::= { endptNVM 30}
+
+
+endptMaintenance        OBJECT IDENTIFIER ::= { endpointMIB 3 }
+endptUPGRADESCRIPT      OBJECT-TYPE 
+                    SYNTAX      INTEGER  
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Script loading status flag. This variable
+                        returns '0' if the upgrade script (endpt46XXUPGR)
+                        was successfully obtained and interpreted since the
+                        last power-up or reset. This variable returns '1' if
+                        the upgrade script was successfully obtained and but
+                        NOT successfully interpreted since the last power-up
+                        or reset. This variable returns '2' if the upgrade
+                        script was NOT successfully obtained since the last
+                        power-up or reset."
+                    ::= { endptMaintenance 1 }
+endptAPPINUSE    OBJECT-TYPE 
+                    SYNTAX      DisplayString 
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Application file name.  This variable returns
+                        the name of the application file in the endpoint."
+                    ::= { endptMaintenance 2 }
+endptAPPSTAT    OBJECT-TYPE 
+                    SYNTAX      INTEGER  
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Application download flag. This variable
+				returns '0' if the most recent attempt to download
+				and store an application file was successful. This
+				variable returns '1' if the most recent attempt to
+				download an application file was successful but the
+				file was not successfully stored in NVM.  This variable
+				returns '2' if the most recent attempt to download an
+				application file was NOT successful."
+		    ::= { endptMaintenance 3 }
+endptRecentLog	OBJECT-TYPE
+			  SYNTAX SEQUENCE OF EndptRecentLogEntry
+		 	  MAX-ACCESS	not-accessible
+			  STATUS		current
+			  DESCRIPTION	"Each entry is one of up to 75 syslog event 
+				messages added since last reset or power-up, each of 
+				which has severity code less than the value of NVLOGLOCAL.  
+				Entries are in chronological order, oldest first."
+			  ::= { endptMaintenance 4 }
+endptRecentLogEntry	OBJECT-TYPE
+			  SYNTAX EndptRecentLogEntry
+			  MAX-ACCESS	not-accessible
+			  STATUS		current
+			  DESCRIPTION	"Each entry is one of up to 75 syslog event 
+				messages added since last reset or power-up, each of 
+				which has severity code less than the value of NVLOGLOCAL. 
+				Entries are in chronological order, oldest first."
+			  INDEX		{ endptRecentLogText }
+			  ::= { endptRecentLog 1 }
+EndptRecentLogEntry	    ::= 
+				SEQUENCE {
+			  		endptRecentLogText
+			  			DisplayString
+				}
+endptRecentLogText	OBJECT-TYPE
+			  SYNTAX		DisplayString
+			  MAX-ACCESS	read-only
+			  STATUS		current
+			  DESCRIPTION	"Syslog event message."
+			  ::= { endptRecentLogEntry 1 }	
+endptResetLog	OBJECT-TYPE
+			  SYNTAX SEQUENCE OF EndptResetLogEntry
+		 	  MAX-ACCESS	not-accessible
+			  STATUS		current
+			  DESCRIPTION	"Each entry is one of up to 75 syslog event 
+				messages added before the last reset or power-up, each of 
+				which has severity code less than the value of NVLOGLOCAL.  
+				Entries are in chronological order, oldest first."
+			  ::= { endptMaintenance 5 }
+endptResetLogEntry	OBJECT-TYPE
+			  SYNTAX EndptResetLogEntry
+			  MAX-ACCESS	not-accessible
+			  STATUS		current
+			  DESCRIPTION	"Each entry is one of up to 75 syslog event 
+				messages added before the last reset or power-up, each of 
+				which has severity code less than the value of NVLOGLOCAL.  
+				Entries are in chronological order, oldest first."
+			  INDEX		{ endptResetLogText }
+			  ::= { endptResetLog 1 }
+EndptResetLogEntry	    ::= 
+				SEQUENCE {
+			  		endptResetLogText
+			  			DisplayString
+				}
+endptResetLogText	OBJECT-TYPE
+			  SYNTAX		DisplayString
+			  MAX-ACCESS	read-only
+			  STATUS		current
+			  DESCRIPTION	"Syslog event message."
+			  ::= { endptResetLogEntry 1 }	
+
+
+
+endptDEFINITY   OBJECT IDENTIFIER ::= { endpointMIB 4 }
+endptPORTAUD    OBJECT-TYPE
+                    SYNTAX      INTEGER 
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Transport-layer audio port. This variable returns
+                        the endpoint's transport layer port number for audio, 
+                        currently in use."
+                    ::= { endptDEFINITY 1 }
+endptPORTSIG    OBJECT-TYPE
+                    SYNTAX      INTEGER 
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Transport-layer signaling port. This variable 
+                        returns the endpoint's transport layer port number for 
+                        signaling, currently in use."
+                    ::= { endptDEFINITY 2 }
+endptFEIPADD    OBJECT-TYPE
+                    SYNTAX      OCTET STRING
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Audio endpoint address. This variable returns
+                        a 4-octet string specifying the address of the far-end 
+                        audio endpoint currently in use."
+                    ::= { endptDEFINITY 3 }
+endptFEPORT     OBJECT-TYPE
+                    SYNTAX      INTEGER 
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Audio endpoint port number. This variable returns
+                        the far-end endpoint's transport layer port number for 
+                        audio, currently in use."
+                    ::= { endptDEFINITY 4 }
+endptCODECR     OBJECT-TYPE
+                    SYNTAX      DisplayString
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Receive codec. This variable returns the 
+                        designation of the Receive codec currently in use."
+                    ::= { endptDEFINITY 5 }
+endptCODECT     OBJECT-TYPE
+                    SYNTAX      DisplayString
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Transmit codec. This variable returns the 
+                        designation of the Transmit codec currently in use."
+                    ::= { endptDEFINITY 6 }
+endptJCPC       OBJECT-TYPE
+                    SYNTAX      INTEGER 
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Jitter compensation packet count. This variable 
+                        returns the Jitter compensation packet count currently
+                        in use (between 0 and 20, inclusive)."
+                    ::= { endptDEFINITY 7 }
+endptTMSEC      OBJECT-TYPE
+                    SYNTAX      INTEGER 
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Transmit buffer fill level. This variable returns 
+                        the transmit buffer minimum fill level, in msec, currently
+                        in use."
+                    ::= { endptDEFINITY 8 }
+endptNVPHONEXT      OBJECT-TYPE
+                    SYNTAX      DisplayString
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Endpoint's phone extension.  This variable 
+				returns a text string identifying the endpoint's extension, 
+				in free text format.  The default value is NULL. "
+                    ::= { endptDEFINITY 9 }
+endptL2QBBE     OBJECT-TYPE
+                    SYNTAX      INTEGER 
+                    MAX-ACCESS  read-only
+                    STATUS      obsolete
+                    DESCRIPTION "802.1Q BBE priority value. This variable returns
+                        an integer between 0 and 7 inclusive specifying the 
+                        far-end endpoint's Layer 2 Better than Best Effort audio 
+                        priority value."
+                    ::= { endptDEFINITY 10 }
+endptDSCPBBE    OBJECT-TYPE
+                    SYNTAX      INTEGER 
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "DSCP BBE priority value. This variable returns
+                        an integer between 0 and 7 inclusive specifying the 
+                        far-end endpoint's DiffServ Better than Best Effort audio 
+                        priority value."
+                    ::= { endptDEFINITY 11 }
+endptRTCPCONT   OBJECT-TYPE
+                    SYNTAX      INTEGER 
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "RTCP Control flag. This variable returns
+                        0 if the RTCP control status is off/disabled, else 1."
+                    ::= { endptDEFINITY 12 }
+endptRTCPFLOW   OBJECT-TYPE
+                    SYNTAX      INTEGER 
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "RTCP Flowrate. This variable returns
+                        an integer between 0 and 65335 inclusive specifying the
+                        RTCP flowrate in milliseconds."
+                    ::= { endptDEFINITY 13 }
+endptRSVPCONT   OBJECT-TYPE
+                    SYNTAX      INTEGER 
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "RSVP Control flag. This variable returns
+                        0 if the RSVP control status is off/disabled, else 1."
+                    ::= { endptDEFINITY 14 }
+endptRSVPRFRSH   OBJECT-TYPE
+                    SYNTAX      INTEGER 
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "RSVP Refresh rate. This variable returns
+                        an integer between 0 and 65335 inclusive specifying the
+                        RSVP refresh rate in milliseconds."
+                    ::= { endptDEFINITY 15 }
+endptRSVPRTRY   OBJECT-TYPE
+                    SYNTAX      INTEGER 
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "RSVP Failed Retry flag. This variable returns
+                        0 if the RSVP Failed Retry Reservation control status is 
+                        off/disabled, else 1."
+                    ::= { endptDEFINITY 16 }
+endptRSVPPROF   OBJECT-TYPE
+                    SYNTAX      INTEGER 
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "RSVP profile flag. This variable returns
+                        0 if the RSVP profile is guaranteed, else 1 for controlled
+                        load."
+                    ::= { endptDEFINITY 17 }
+endptPHNCC      OBJECT-TYPE
+                    SYNTAX      INTEGER 
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Telephone country code. This variable returns
+                        1-3 digits; the administered international country code
+                        for the location of the serving call server."
+                    ::= { endptDEFINITY 18 }
+endptPHNDPLENGTH OBJECT-TYPE
+                    SYNTAX      INTEGER 
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Telephone dial plan length. This variable returns
+                        1 or 2 digits (3-10); the length of the administered dial 
+                        plan for the serving call server."
+                    ::= { endptDEFINITY 19 }
+endptPHNIC      OBJECT-TYPE
+                    SYNTAX      INTEGER 
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Telephone international access code. This variable
+                        returns 1-4 digits; the digits dialed to access public 
+                        network international trunks from the serving call server."
+                    ::= { endptDEFINITY 20 }
+endptPHNLD      OBJECT-TYPE
+                    SYNTAX      INTEGER 
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Telephone long distance access code. This variable
+                        returns 1 digit or Null; the digit dialed to access public 
+                        network long distance trunks from the serving call server."
+                    ::= { endptDEFINITY 21 }
+endptPHNLDLENGTH OBJECT-TYPE
+                    SYNTAX      INTEGER 
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Length of national telephone number. This 
+                        variable returns 1 or 2 digits (5-15); the number of digits 
+                        in the longest possible national telephone number for the 
+                        location of the serving call server."
+                    ::= { endptDEFINITY 22 }
+endptPHNOL      OBJECT-TYPE
+                    SYNTAX      INTEGER 
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Outside line access code. This variable returns
+                        1 or 2 digits or Null; the digit(s) dialed to access public
+                        network local trunks from the serving call server."
+                    ::= { endptDEFINITY 23 }
+endptNTWKAUDIO  OBJECT-TYPE
+                    SYNTAX      INTEGER 
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Network audio quality display flag. This variable 
+                        returns 0 if the Network audio quality display status is 
+                        off/disabled, else 1. This flag does not apply to the 4610, 
+				4620, or 4630 IP Telephones."
+                    ::= { endptDEFINITY 24 }
+endptENHDIALSTAT OBJECT-TYPE
+                    SYNTAX      INTEGER 
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Enhanced Local Dialing status.  This variable 
+				returns 0 if the Enhanced Local Dialing status is
+                        off/disabled, else 1."                     
+                    ::= { endptDEFINITY 25 }
+endptRESTORESTAT OBJECT-TYPE
+                    SYNTAX      INTEGER 
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "FTP Backup/restore status.  This variable returns 
+				0 if the automatic FTP backup and restore feature status is 
+				off/disabled, else 1."                     
+                    ::= { endptDEFINITY 26 }
+endptFTPUSERSTAT OBJECT-TYPE
+                    SYNTAX      INTEGER 
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "FTP User permissions status.  This variable returns 
+				0 if the user may not change previously-administered FTP 
+				server and Directory data, 1 if the user may change or 
+				create both FTP server and Directory data, and 2 if the user 
+                        may only change or create FTP Directory data."                     
+                    ::= { endptDEFINITY 27 }
+endptRASGkList	OBJECT-TYPE
+			  SYNTAX SEQUENCE OF EndptRASGkEntry
+		 	  MAX-ACCESS	not-accessible
+			  STATUS		current
+			  DESCRIPTION	"Each entry is one of up to 30 gatekeeper 
+				addresses in dotted-decimal or DNS format, as downloaded from 
+				the call server during RAS.  Entries are listed in the order
+                        received."
+			  ::= { endptDEFINITY 28 }
+endptRASGkEntry   OBJECT-TYPE
+			  SYNTAX EndptRASGkEntry
+			  MAX-ACCESS	not-accessible
+			  STATUS		current
+			  DESCRIPTION	"Each entry is one of up to 30 gatekeeper 
+				addresses in dotted-decimal or DNS format, as downloaded from
+				the call server during RAS.  Entries are listed in the order
+                        received."
+			  INDEX		{ endptRASGkEntryData}
+			  ::= { endptRASGkList 1 }
+EndptRASGkEntry	  ::= 
+				SEQUENCE {
+			  		endptRASGkEntryData
+			  			DisplayString
+				}
+endptRASGkEntryData OBJECT-TYPE
+			  SYNTAX		DisplayString
+			  MAX-ACCESS	read-only
+			  STATUS		current
+			  DESCRIPTION	"Data for an individual RAS-provided Gatekeeper."
+			  ::= { endptRASGkEntry 1 }
+
+
+endptAdvApps    OBJECT IDENTIFIER ::= { endpointMIB 5 }
+endptCIBURL     OBJECT-TYPE
+                    SYNTAX      DisplayString 
+                    MAX-ACCESS  read-only
+                    STATUS      obsolete
+                    DESCRIPTION "Documentation URL. This variable returns
+                        a URL of the directory in which the web-based Customer
+                        Information Booklet web pages are located."
+                    ::= { endptAdvApps 1 }
+endptDIRSRVR     OBJECT-TYPE
+                    SYNTAX      OCTET STRING 
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "LDAP Server address. This variable returns
+                        a  the IP address of the LDAP server to be used for 
+                        the phone's Directoryapplication, in dotted decimal 
+                        or DNS format."
+                    ::= { endptAdvApps 2 }
+endptDIRTOPDN     OBJECT-TYPE
+                    SYNTAX      DisplayString 
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Directory Top Name. This variable returns
+                        a string specifying the Topmost Distinguished Name in the 
+                        LDAP Directory to be used for the 4630's Directory 
+                        application."
+                    ::= { endptAdvApps 3 }
+endptDIRFULLNAME  OBJECT-TYPE
+                    SYNTAX      DisplayString 
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Directory FullName Label. This variable returns
+                        a string specifying the LDAP Directory's Full Name Field
+                        Label, to be used for the 4630's Directory application."
+                    ::= { endptAdvApps 4 }
+endptDIRTELNUM  OBJECT-TYPE
+                    SYNTAX      DisplayString 
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Directory Phone Number Label. This variable returns
+                        a string specifying the LDAP Directory's Telephone Number 
+                        Field Label, to be used for the 4630's Directory application."
+                    ::= { endptAdvApps 5 }
+endptDIRSRCHTIME  OBJECT-TYPE
+                    SYNTAX      INTEGER
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Directory Search Duration. This variable returns
+                        an integer specifying the maximum number of seconds the LDAP
+                        Directory should be searched before reporting completion or
+                        failure of the search."
+                    ::= { endptAdvApps 6 }
+endptDIRSRVRPWD   OBJECT-TYPE
+                    SYNTAX      DisplayString 
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Directory Access Password. This variable returns
+                        a string specifying the password used for accessing the LDAP
+                        Directory.  The null string is returned if no password has
+                        been specified."
+                    ::= { endptAdvApps 7 }
+endptDIRUSERID   OBJECT-TYPE
+                    SYNTAX      DisplayString 
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Directory Access User ID. This variable returns
+                        a string specifying the User identity used for accessing 
+                        the LDAP Directory.  The null strong is returned if no 
+                        user ID has been specified."
+                    ::= { endptAdvApps 8 }
+endptDIRCODING  OBJECT-TYPE
+                    SYNTAX      DisplayString 
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Directory Coding Scheme. This variable returns
+                        a string specifying the character coding scheme (e.g. ASCII
+                        or Latin-1) to be used for LDAP Directory queries."
+                    ::= { endptAdvApps 9 }
+endptDIRSTAT    OBJECT-TYPE
+                    SYNTAX      INTEGER
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Directory Connection Status. This variable returns
+                        an integer specifying the result code for the most recent
+                        Bind Request sent by the 4630 to the LDAP server."
+                    ::= { endptAdvApps 10 }
+endptFTPSRVR    OBJECT-TYPE
+                    SYNTAX      OCTET STRING
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "FTP Server address. This variable returns
+                        the IP address of the FTP server to be used for the phone's 
+				file storage and retrieval, in dotted decimal or DNS format."
+                    ::= { endptAdvApps 11 }
+endptFTPDIR     OBJECT-TYPE
+                    SYNTAX      DisplayString 
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "FTP Server directory. This variable returns
+                        a path name of the directory on the FTP server 
+                        to be used for the phone's file storage and retrieval."
+                    ::= { endptAdvApps 12 }
+endptPHNEMERGNUM  OBJECT-TYPE
+                    SYNTAX      DisplayString 
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Emergency number. This variable returns
+                        a string specifying the emergency number to be outpulsed 
+                        when the user presses the optional Emergency button in
+                        the 4630 Speed Dial application."
+                    ::= { endptAdvApps 13 }
+endptPHNNUMOFCA   OBJECT-TYPE
+                    SYNTAX      INTEGER
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Number of Call Appearances. This variable returns
+                        the number of Call Appearances downloaded from the DEFINITY
+                        during registration to the 4630, 462x and 4610SW."
+                    ::= { endptAdvApps 14 }
+endptPHNNUMOFFB   OBJECT-TYPE
+                    SYNTAX      INTEGER
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Number of Feature Buttons. This variable returns
+                        the number of administered Feature Buttons downloaded from 
+                        the switch during registration to the 4630, 462x and 4610SW."
+                    ::= { endptAdvApps 15 }
+endptWEBCODING  OBJECT-TYPE
+                    SYNTAX      DisplayString 
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Web Coding Scheme. This variable returns
+                        a string specifying the character coding scheme (e.g. ASCII
+                        or Latin-1) to be used for characters entered on forms on 
+                        web pages. Used by the 4630 Web application."
+                    ::= { endptAdvApps 16 }
+endptWEBEXCEPT  OBJECT-TYPE
+                    SYNTAX      DisplayString 
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Web Proxy Server Exception List. This variable 
+                        returns a string specifying a list of one or more HTTP  
+                        proxy server Exception domains, separated by commas with 
+                        no intervening spaces, up to 127 total characters.  Used 
+				by the 4630 Web application."
+                    ::= { endptAdvApps 17 }
+endptWEBHOME    OBJECT-TYPE
+                    SYNTAX      DisplayString 
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Web application URL. This variable returns
+                        a URL of the Home page for the 4630 Web application."
+                    ::= { endptAdvApps 18 }
+endptWEBPORT    OBJECT-TYPE
+                    SYNTAX      INTEGER
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Web application TCP port. This variable returns
+                        an integer specifying the TCP port most recently used for 
+                        the HTTP proxy server.  Used by the 4630 Web application."
+                    ::= { endptAdvApps 19 }
+endptWEBPROXY   OBJECT-TYPE
+                    SYNTAX      OCTET STRING 
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Web Proxy Server. This variable returns
+                        an IP addresses, in dotted-decimal or DNS format, of an  
+                        HTTP proxy server.  Used by the 4630 Web application."
+                    ::= { endptAdvApps 20 }
+endptDIRLDAPPORT OBJECT-TYPE
+                    SYNTAX      INTEGER
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "LDAP Directory Port. This variable returns
+                        the port number for LDAP messages, and has a default value
+                        of 389."
+                    ::= { endptAdvApps 21 }
+endptVMLCODING OBJECT-TYPE
+                      SYNTAX      DisplayString 
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Voice Mail Coding Scheme. This variable returns
+                        a string specifying the character coding scheme (e.g. ASCII
+                        or Latin-1) to be used for characters entered on forms on 
+                        the 4630 Voice Mail application."
+                    ::= { endptAdvApps 22 }
+endptVMLHOME    OBJECT-TYPE
+                    SYNTAX      DisplayString 
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Voice Mail application URL. This variable returns
+                        a URL of the Home page for the 4630 Voice Mail application."
+                    ::= { endptAdvApps 23 }
+endptCLACTIVE    OBJECT-TYPE
+                    SYNTAX      INTEGER 
+                    MAX-ACCESS  read-only
+                    STATUS      obsolete
+                    DESCRIPTION "Call Log activation flag. This variable returns
+                        0 if the call log status is off/disabled, else 1."
+                    ::= { endptAdvApps 24 }
+endptWMLCODING  OBJECT-TYPE
+                    SYNTAX      DisplayString 
+                    MAX-ACCESS  read-only
+                    STATUS      obsolete
+                    DESCRIPTION "4610SW/2x Web Coding Scheme. This variable returns
+                        a string specifying the character coding scheme (e.g. ASCII
+                        or Latin-1) to be used for characters entered on forms on 
+                        web pages. Used by the 4610SW/462x Web application."
+                    ::= { endptAdvApps 25 }
+endptWMLEXCEPT  OBJECT-TYPE
+                    SYNTAX      DisplayString 
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "4610SW/2x Web Proxy Server Exception List. This 
+                        variable returns a string specifying a list of one or 
+                        more HTTP proxy server Exception domains, separated by 
+                        commas with no intervening spaces, up to 127 total  
+				characters. Used by the 4610SW/462x Web application."
+                    ::= { endptAdvApps 26 }
+endptWMLHOME    OBJECT-TYPE
+                    SYNTAX      DisplayString 
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "4610SW/2x Web application URL. This variable returns
+                        a URL of the Home page for the 4610SW/462x Web application."
+                    ::= { endptAdvApps 27 }
+endptWMLPORT    OBJECT-TYPE
+                    SYNTAX      INTEGER
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "4610SW/2x Web application TCP port. This variable 
+                        returns an integer specifying the TCP port most recently 
+                        used for the HTTP proxy server.  Used by the 4610SW/462x
+                        Web application."
+                    ::= { endptAdvApps 28 }
+endptWMLPROXY   OBJECT-TYPE
+                    SYNTAX      OCTET STRING 
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "4610SW/2x Web Proxy Server. This variable returns
+                        an IP addresses, in dotted-decimal or DNS format, of an  
+                        HTTP proxy server.  Used by the 4610SW/2x Web application."
+                    ::= { endptAdvApps 29 }
+endptCTISTAT    OBJECT-TYPE
+                    SYNTAX      INTEGER
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "CTI flag. This variable returns
+                        0 if the CTI application is set to off, else 1."
+                    ::= { endptAdvApps 30 }
+endptCTIUDPPORT OBJECT-TYPE
+                    SYNTAX      INTEGER
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "CTI application UDP port. This variable returns
+                        an integer specifying the UDP port most recently used for 
+                        the UDP listener to receive broadcast messages."
+                    ::= { endptAdvApps 31 }
+endptSTKSTAT    OBJECT-TYPE
+                    SYNTAX      INTEGER
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Stock Ticker flag. This variable returns
+                        0 if the 4630 Stock Ticker application is set to off,
+                        else 1."
+                    ::= { endptAdvApps 32 }
+endptSUBSCRIBELIST    OBJECT-TYPE
+                    SYNTAX      DisplayString 
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "4610SW/2x Web push subscription list. This 
+                        variable returns a string containing one or more fully 
+                        qualified URLs to which the phone's Web application 
+                        subscribes for potential pushed content."
+                    ::= { endptAdvApps 33 }
+endptTPSLIST    OBJECT-TYPE
+                    SYNTAX      DisplayString 
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "4610SW/2x Web Trusted Push Server list. This 
+                        variable returns a string containing one or more domains 
+                        and paths in DNS format, used to determine for 
+                        validation of push requests."
+                    ::= { endptAdvApps 34 }
+endptWMLIDLETIME    OBJECT-TYPE
+                    SYNTAX      INTEGER
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Web Idle Timer. This variable returns the number
+                        of minutes, from 1 to 60 inclusive, of idle activity on the
+                        telephone before the Web Idle Timer URI is displayed."
+                    ::= { endptAdvApps 35 }
+endptWMLIDLEURI    OBJECT-TYPE
+                    SYNTAX      DisplayString
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Web Idle Timer URI. This variable returns the
+                        URI of the WML page displayed after the 4610SW/462x Web 
+                        Idle Timer expires."
+                    ::= { endptAdvApps 36 }
+
+
+endptAdjuncts   OBJECT IDENTIFIER ::= { endpointMIB 6 }
+endptFKEU       OBJECT-TYPE
+                    SYNTAX      INTEGER
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "FKEU flag. This variable returns
+                        0 if the Feature Key Expansion Unit is off, disabled, 
+				or not present, else 1."
+                    ::= { endptAdjuncts 1}
+endptFKEUHEALTH OBJECT-TYPE
+                    SYNTAX      INTEGER
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "FKEU flag. This variable returns
+                        1 if the most recent self-test of the Feature Key Expansion 
+				Unit or the 4620 failed, else 0."
+                    ::= { endptAdjuncts 2}
+
+
+endptSIP   OBJECT IDENTIFIER ::= { endpointMIB 7 }
+endptCALLFWDSTAT OBJECT-TYPE
+                    SYNTAX      INTEGER
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Call Forwarding setting. This variable returns
+                        the sum of all Call Forwarding permissions.  Range is 0
+                        to 7, with 0 as the default."
+                    ::= { endptSIP 1}
+endptCOVERAGEADDR OBJECT-TYPE
+                    SYNTAX      DisplayString
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Call Coverage Server address. This variable returns
+                        the URI to which call coverage is sent; up to 255 characters."
+                    ::= { endptSIP 2}
+endptDATETIMEFORMAT OBJECT-TYPE
+                    SYNTAX      INTEGER
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Date and Time format specification. This variable 
+                        returns a parameter indicating the desired format for display 
+				of date and time.  Range is 0 to 3, with 0 as the default."
+                    ::= { endptSIP 3}
+endptMUSICSRVR     OBJECT-TYPE
+                    SYNTAX      DisplayString
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "List of music server addresses.  This variable 
+				returns a sequence of IP addresses, in dotted-decimal format
+				and separated by commas, of music servers available for use."
+                    ::= { endptSIP 4}
+endptMUSICSRVRINUSE     OBJECT-TYPE
+                    SYNTAX      IpAddress
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Music server address.  This variable returns a 
+                        4-octet string specifying the IP address of the music server 
+                        most recently used."
+                    ::= { endptSIP 5}
+endptMWISRVR    OBJECT-TYPE
+                    SYNTAX      DisplayString
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "List of message waiting indicator server addresses.  
+				This variable returns a sequence of IP addresses, in 
+				dotted-decimal format and separated by commas, of message 
+				waiting indicator servers available for use."
+                    ::= { endptSIP 6}
+endptMWISRVRINUSE   OBJECT-TYPE
+                    SYNTAX      IpAddress
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Message waiting indicator server address.  This 
+                        variable returns a 4-octet string specifying the IP address 
+                        of the message waiting indicator server most recently used."
+                    ::= { endptSIP 7}
+endptREGISTERWAIT OBJECT-TYPE
+                    SYNTAX      INTEGER
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Registration wait interval. This variable returns 
+                        the number of seconds between attempts to re-register with 
+				the current server.  Range is 0 to 65535, with 3600 as the
+                        default."
+                    ::= { endptSIP 8}
+endptSIPPROXYSRVR    OBJECT-TYPE
+                    SYNTAX      DisplayString
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "List of SIP Proxy server addresses.  This variable 
+				returns a sequence of IP addresses, in dotted-decimal format 
+				and separated by commas, of SIP Proxy servers available for use."
+                    ::= { endptSIP 9}
+endptSIPPROXYSRVRINUSE   OBJECT-TYPE
+                    SYNTAX      IpAddress
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "SIP Proxy server address.  This variable returns a
+                        4-octet string specifying the IP address of the SIP Proxy 
+				server most recently used."
+                    ::= { endptSIP 10}
+endptSIPREGISTRAR    OBJECT-TYPE
+                    SYNTAX      DisplayString
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "List of SIP registrar addresses.  This variable 
+				returns a sequence of IP addresses, in dotted-decimal format 
+				and separated by commas, of SIP registrars available for use."
+                    ::= { endptSIP 11}
+endptSIPREGISTRARINUSE   OBJECT-TYPE
+                    SYNTAX      IpAddress
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "SIP registrar address.  This variable returns a 4-octet
+                        string specifying the IP address of the SIP registrar most 
+				recently used."
+                    ::= { endptSIP 12}
+endptSPEAKERSTAT OBJECT-TYPE
+                    SYNTAX      INTEGER
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Speaker setting. This variable returns a parameter
+                        indicating the allowed level of speakerphone functionality.  
+				Range is 0 to 2, with 2 as the default."
+                    ::= { endptSIP 13}
+endptSIPPORT    OBJECT-TYPE
+                    SYNTAX      INTEGER 
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "TCP/UDP port used for SIP messages.  This variable 
+                        returns the current port number used for SIP messaging.  The
+                        default is 5060."
+			  ::= { endptSIP 14}
+endptSIPDOMAIN  OBJECT-TYPE
+                    SYNTAX      DisplayString
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "SIP registration domain name.  This text is used in the 
+                        Contact header field as part of SIP registration."
+			  ::= { endptSIP 15}
+endptPHNNUMOFSA OBJECT-TYPE
+                    SYNTAX      INTEGER
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Number of Session Appearances. This variable returns
+                        the number of Session Appearances administered for the SIP 
+                        phone."
+                    ::= { endptSIP 16 }
+endptDIALWAIT   OBJECT-TYPE
+                    SYNTAX      INTEGER 
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Dialing timeout interval.  This variable returns the 
+                        number of seconds after the user stops dialing, that the 
+                        telephone waits before automatically dialing the number enterered 
+                        so far. The range is 0 to 10, and zero seconds means the 
+                        telephone will wait forever, or until the user presses Send."
+			  ::= { endptSIP 17}
+endptDIALPLAN   OBJECT-TYPE
+                    SYNTAX      DisplayString
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "SIP dial plan.  This variable returns the administered
+                        dial plan, used during manual dialing to allow a call to be 			      initiated without the use of a Send button and without waiting 
+                        for the expiration of a timeout interval; up to 1000 characters."
+			  ::= { endptSIP 18}
+endptCALLFWDADDR OBJECT-TYPE
+                    SYNTAX      DisplayString
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Call Forwarding address. This variable returns
+                        the URI to which calls are forwarded; up to 255 characters."
+                    ::= { endptSIP 19}
+endptCALLFWDDELAY OBJECT-TYPE
+                    SYNTAX      INTEGER 
+                    MAX-ACCESS  read-only
+                    STATUS      current
+                    DESCRIPTION "Call Forwarding delay. This variable returns the number 
+                        of times the telephone will ring before a call is forwarded, if 
+                        Call Forwarding on No Answer is selected."
+			  ::= { endptSIP 20}
+END