[3e954a]: cisco / ALTIGA-HARDWARE-STATS-MIB.my  Maximize  Restore  History

Download this file

749 lines (652 with data), 22.9 kB

-- *------------------------------------------------------------------
-- * ALTIGA-HARDWARE-STATS-MIB.my:  Altiga Hardware Statistics MIB.
-- *
-- * Altiga Networks was acquired by Cisco Systems on March 29, 2000
-- *
-- * Copyright (c) 2002, 2003 by Cisco Systems, Inc.
-- * All rights reserved.
-- *
-- *------------------------------------------------------------------

ALTIGA-HARDWARE-STATS-MIB DEFINITIONS ::= BEGIN

   IMPORTS
      MODULE-IDENTITY, OBJECT-TYPE, Integer32, Gauge32, Counter32, 
      TimeTicks, Unsigned32
         FROM SNMPv2-SMI
      DisplayString, TruthValue, TEXTUAL-CONVENTION
         FROM SNMPv2-TC
      OBJECT-GROUP, MODULE-COMPLIANCE
         FROM SNMPv2-CONF
      alStatsHardware, alHardwareGroup
         FROM ALTIGA-MIB
      alHardwareMibModule
         FROM ALTIGA-GLOBAL-REG;

      altigaHardwareStatsMibModule MODULE-IDENTITY
         LAST-UPDATED   "200303271300Z"
      ORGANIZATION   "Cisco Systems, Inc."
      CONTACT-INFO
         "Cisco Systems
          170 W Tasman Drive
          San Jose, CA  95134
          USA

          Tel: +1 800 553-NETS
          E-mail: cs-cvpn3000@cisco.com"

      DESCRIPTION
         "The Altiga Hardware Statistics MIB models counters and objects that
          are of management interest for the hardware.
         
          Acronyms
          The following acronyms are used in this document:

            CPU:        Central Processing Unit

            MB:         Megabyte

            MIB:        Management Information Base

            PS:         Power Supply

            RPM:        Revolutions Per Minute

            SEP:        Scalable Encryption Processor

            WAN:        Wide Area Network

         "

        REVISION "200303271300Z"
        DESCRIPTION
           "Added new emun to ConcentratorCard."

        REVISION "200209051300Z"
        DESCRIPTION
           "Added module compliance."

        REVISION "200207100000Z"
        DESCRIPTION
           "Updated with new header"

      ::= { alHardwareMibModule 2 }

-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- MIB Objects
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++

ConcentratorCard     ::= TEXTUAL-CONVENTION
   STATUS         current
   DESCRIPTION
      "Concentrator Card Type."
   SYNTAX         INTEGER {
                     none(1),
                     sep(2),
                     dualT1Wan(3),
                     sepE(4)
                  }

ConcentratorType     ::= TEXTUAL-CONVENTION
   STATUS         current
   DESCRIPTION
      "Concentrator Type indicates the chassis type."
   SYNTAX         INTEGER {
                     cxx(1), -- VPN3015 through VPN3080
                     c5(2),  -- VPN3005
                     c1(3)   -- VPN3002
                  }

alStatsHardwareGlobal   OBJECT IDENTIFIER ::= { alStatsHardware 1 }

-- Current Settings and Alarms

alHardwareCpuVoltage    OBJECT-TYPE
   SYNTAX         Gauge32
   UNITS          "centivolts"
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The current CPU voltage in centivolts."
   ::= { alStatsHardwareGlobal 1 }

alHardwareCpuVoltageAlarm  OBJECT-TYPE
   SYNTAX         TruthValue
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The alarm status for CPU voltage.  This alarm will fired when the CPU
       voltage is detected out of configured range."
   ::= { alStatsHardwareGlobal 2 }

alHardwareCpuVoltageCount  OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The number of alarm events for CPU voltage."
   ::= { alStatsHardwareGlobal 3 }

alHardwareCpuVoltageTime   OBJECT-TYPE
   SYNTAX         TimeTicks
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The sysUptime at the time of the last change of alarm status for CPU
       voltage."
   ::= { alStatsHardwareGlobal 4 }

alHardwarePs1Voltage3v     OBJECT-TYPE
   SYNTAX         Gauge32
   UNITS          "centivolts"
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The current 3V voltage of Power Supply 1 in centivolts."
   ::= { alStatsHardwareGlobal 5 }

alHardwarePs1Voltage3vAlarm   OBJECT-TYPE
   SYNTAX         TruthValue
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The alarm status for PS1 3v voltage.  This alarm will fired when the
       3v power supply 1 voltage is detected out of configured range."
   ::= { alStatsHardwareGlobal 6 }

alHardwarePs1Voltage3vCount   OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The number of alarm events for PS1 3v voltage."
   ::= { alStatsHardwareGlobal 7 }

alHardwarePs1Voltage3vTime OBJECT-TYPE
   SYNTAX         TimeTicks
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The sysUptime at the time of the last change of alarm status for PS1 
       3v voltage."
   ::= { alStatsHardwareGlobal 8 }

alHardwarePs1Voltage5v     OBJECT-TYPE
   SYNTAX         Gauge32
   UNITS          "centivolts"
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The current 5V voltage of Power Supply 1 in centivolts."
   ::= { alStatsHardwareGlobal 9 }

alHardwarePs1Voltage5vAlarm   OBJECT-TYPE
   SYNTAX         TruthValue
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The alarm status for PS1 5v voltage.  This alarm will fired when the
       5v power supply 1 voltage is detected out of configured range."
   ::= { alStatsHardwareGlobal 10 }

alHardwarePs1Voltage5vCount   OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The number of alarm events for PS1 5v voltage."
   ::= { alStatsHardwareGlobal 11 }

alHardwarePs1Voltage5vTime OBJECT-TYPE
   SYNTAX         TimeTicks
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The sysUptime at the time of the last change of alarm status for PS1
       5v voltage."
   ::= { alStatsHardwareGlobal 12 }

alHardwarePs2Voltage3v     OBJECT-TYPE
   SYNTAX         Gauge32
   UNITS          "centivolts"
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The current 3V voltage of Power Supply 2 in centivolts."
   ::= { alStatsHardwareGlobal 13 }

alHardwarePs2Voltage3vAlarm   OBJECT-TYPE
   SYNTAX         TruthValue
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The alarm status for PS2 3v voltage.  This alarm will fired when the
       3v power supply 2 voltage is detected out of configured range."
   ::= { alStatsHardwareGlobal 14 }

alHardwarePs2Voltage3vCount   OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The number of alarm events for PS2 3v voltage."
   ::= { alStatsHardwareGlobal 15 }

alHardwarePs2Voltage3vTime OBJECT-TYPE
   SYNTAX         TimeTicks
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The sysUptime at the time of the last change of alarm status for PS2
       3v voltage."
   ::= { alStatsHardwareGlobal 16 }

alHardwarePs2Voltage5v     OBJECT-TYPE
   SYNTAX         Gauge32
   UNITS          "centivolts"
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The current 5V voltage of Power Supply 2 in centivolts."
   ::= { alStatsHardwareGlobal 17 }

alHardwarePs2Voltage5vAlarm   OBJECT-TYPE
   SYNTAX         TruthValue
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The alarm status for PS2 5v voltage.  This alarm will fired when the
       5v power supply 2 voltage is detected out of configured range."
   ::= { alStatsHardwareGlobal 18 }

alHardwarePs2Voltage5vCount   OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The number of alarm events for PS2 5v voltage."
   ::= { alStatsHardwareGlobal 19 }

alHardwarePs2Voltage5vTime OBJECT-TYPE
   SYNTAX         TimeTicks
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The sysUptime at the time of the last change of alarm status for PS2
       5v voltage."
   ::= { alStatsHardwareGlobal 20 }

alHardwareBoardVoltage3v   OBJECT-TYPE
   SYNTAX         Gauge32
   UNITS          "centivolts"
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The current 3V voltage of the mainboard in centivolts."
   ::= { alStatsHardwareGlobal 21 }

alHardwareBoardVoltage3vAlarm OBJECT-TYPE
   SYNTAX         TruthValue
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The alarm status for the mainboard 3v voltage.  This alarm will fired
       when the 3v mainboard voltage is detected out of configured range."
   ::= { alStatsHardwareGlobal 22 }

alHardwareBoardVoltage3vCount OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The number of alarm events for the mainboard 3v voltage."
   ::= { alStatsHardwareGlobal 23 }

alHardwareBoardVoltage3vTime  OBJECT-TYPE
   SYNTAX         TimeTicks
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The sysUptime at the time of the last change of alarm status for the
       mainboard 3v voltage."
   ::= { alStatsHardwareGlobal 24 }

alHardwareBoardVoltage5v   OBJECT-TYPE
   SYNTAX         Gauge32
   UNITS          "centivolts"
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The current 5V voltage of the mainboard in centivolts."
   ::= { alStatsHardwareGlobal 25 }

alHardwareBoardVoltage5vAlarm OBJECT-TYPE
   SYNTAX         TruthValue
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The alarm status for the mainboard 5v voltage.  This alarm will fired
       when the 5v mainboard voltage is detected out of configured range."
   ::= { alStatsHardwareGlobal 26 }

alHardwareBoardVoltage5vCount OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The number of alarm events for the mainboard 5v voltage."
   ::= { alStatsHardwareGlobal 27 }

alHardwareBoardVoltage5vTime  OBJECT-TYPE
   SYNTAX         TimeTicks
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The sysUptime at the time of the last change of alarm status for the
       mainboard 5v voltage."
   ::= { alStatsHardwareGlobal 28 }

alHardwareCpuTemp    OBJECT-TYPE
   SYNTAX         Integer32 (-40..120)
   UNITS          "degrees Celsius"
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The current CPU temperature in degrees C."
   ::= { alStatsHardwareGlobal 29 }

alHardwareCpuTempAlarm     OBJECT-TYPE
   SYNTAX         TruthValue
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The alarm status for the CPU temperature.  This alarm will fired
       when the CPU temperature is detected out of configured range."
   ::= { alStatsHardwareGlobal 30 }

alHardwareCpuTempCount     OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The number of alarm events for the CPU temperature."
   ::= { alStatsHardwareGlobal 31 }

alHardwareCpuTempTime      OBJECT-TYPE
   SYNTAX         TimeTicks
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The sysUptime at the time of the last change of alarm status for the
       CPU temperature."
   ::= { alStatsHardwareGlobal 32 }

alHardwareCageTemp      OBJECT-TYPE
   SYNTAX         Integer32 (-40..120)
   UNITS          "degrees Celsius"
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The current cage temperature in degrees C."
   ::= { alStatsHardwareGlobal 33 }

alHardwareCageTempAlarm    OBJECT-TYPE
   SYNTAX         TruthValue
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The alarm status for the cage temperature.  This alarm will fired
       when the cage temperature is detected out of configured range."
   ::= { alStatsHardwareGlobal 34 }

alHardwareCageTempCount    OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The number of alarm events for the cage temperature."
   ::= { alStatsHardwareGlobal 35 }

alHardwareCageTempTime     OBJECT-TYPE
   SYNTAX         TimeTicks
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The sysUptime at the time of the last change of alarm status for the
       cage temperature."
   ::= { alStatsHardwareGlobal 36 }

alHardwareFan1Rpm    OBJECT-TYPE
   SYNTAX         Gauge32
   UNITS          "RPM"
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The current speed of fan 1 in RPM."
   ::= { alStatsHardwareGlobal 37 }

alHardwareFan1RpmAlarm     OBJECT-TYPE
   SYNTAX         TruthValue
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The alarm status for fan 1 RPM.  This alarm will fired when fan 1 RPM
       is detected out of configured range."
   ::= { alStatsHardwareGlobal 38 }

alHardwareFan1RpmCount     OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The number of alarm events for fan 1 RPM."
   ::= { alStatsHardwareGlobal 39 }

alHardwareFan1RpmTime      OBJECT-TYPE
   SYNTAX         TimeTicks
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The sysUptime at the time of the last change of alarm status for
       fan 1 RPM."
   ::= { alStatsHardwareGlobal 40 }

alHardwareFan2Rpm    OBJECT-TYPE
   SYNTAX         Gauge32
   UNITS          "RPM"
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The current speed of fan 2 in RPM."
   ::= { alStatsHardwareGlobal 41 }

alHardwareFan2RpmAlarm     OBJECT-TYPE
   SYNTAX         TruthValue
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The alarm status for fan 2 RPM.  This alarm will fired when fan 2 RPM
       is detected out of configured range."
   ::= { alStatsHardwareGlobal 42 }

alHardwareFan2RpmCount     OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The number of alarm events for fan 2 RPM."
   ::= { alStatsHardwareGlobal 43 }

alHardwareFan2RpmTime      OBJECT-TYPE
   SYNTAX         TimeTicks
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The sysUptime at the time of the last change of alarm status for
       fan 2 RPM."
   ::= { alStatsHardwareGlobal 44 }

alHardwareFan3Rpm    OBJECT-TYPE
   SYNTAX         Gauge32
   UNITS          "RPM"
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The current speed of fan 3 in RPM."
   ::= { alStatsHardwareGlobal 45 }

alHardwareFan3RpmAlarm     OBJECT-TYPE
   SYNTAX         TruthValue
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The alarm status for fan 3 RPM.  This alarm will fired when fan 3 RPM
       is detected out of configured range."
   ::= { alStatsHardwareGlobal 46 }

alHardwareFan3RpmCount     OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The number of alarm events for fan 3 RPM."
   ::= { alStatsHardwareGlobal 47 }

alHardwareFan3RpmTime      OBJECT-TYPE
   SYNTAX         TimeTicks
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The sysUptime at the time of the last change of alarm status for
       fan 3 RPM."
   ::= { alStatsHardwareGlobal 48 }

-- List of Current Hardware

alHardwarePs1Type    OBJECT-TYPE
   SYNTAX         INTEGER {
                     none(1), -- no power supply detected in slot
                     ac(2)    -- AC power supply detected in slot
                  }
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The type of power supply for Power Supply slot 1."
   ::= { alStatsHardwareGlobal 49 }

alHardwarePs2Type    OBJECT-TYPE
   SYNTAX         INTEGER {
                     none(1), -- no power supply detected in slot
                     ac(2)    -- AC power supply detected in slot
                  }
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The type of power supply for Power Supply slot 2."
   ::= { alStatsHardwareGlobal 50 }

alHardwareSlot1Card     OBJECT-TYPE
   SYNTAX         ConcentratorCard
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The type of card in slot 1."
   ::= { alStatsHardwareGlobal 51 }

alHardwareSlot2Card     OBJECT-TYPE
   SYNTAX         ConcentratorCard
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The type of card in slot 2."
   ::= { alStatsHardwareGlobal 52 }

alHardwareSlot3Card     OBJECT-TYPE
   SYNTAX         ConcentratorCard
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The type of card in slot 3."
   ::= { alStatsHardwareGlobal 53 }

alHardwareSlot4Card     OBJECT-TYPE
   SYNTAX         ConcentratorCard
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The type of card in slot 4."
   ::= { alStatsHardwareGlobal 54 }

alHardwareSlot1Operational OBJECT-TYPE
   SYNTAX         TruthValue
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The operational status of card in slot 1."
   ::= { alStatsHardwareGlobal 55 }

alHardwareSlot2Operational OBJECT-TYPE
   SYNTAX         TruthValue
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The operational status of card in slot 2."
   ::= { alStatsHardwareGlobal 56 }

alHardwareSlot3Operational OBJECT-TYPE
   SYNTAX         TruthValue
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The operational status of card in slot 3."
   ::= { alStatsHardwareGlobal 57 }

alHardwareSlot4Operational OBJECT-TYPE
   SYNTAX         TruthValue
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The operational status of card in slot 4."
   ::= { alStatsHardwareGlobal 58 }

alHardwareRamSize    OBJECT-TYPE
   SYNTAX         Unsigned32
   UNITS          "MB"
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The amount of memory, in MB on the concentrator."
   ::= { alStatsHardwareGlobal 59 }

alHardwareChassis    OBJECT-TYPE
   SYNTAX         ConcentratorType
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The type of VPN Concentrator this is."
   ::= { alStatsHardwareGlobal 60 }

alHardwareCpuVoltageNominal   OBJECT-TYPE
   SYNTAX         Gauge32
   UNITS          "centivolts"
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The nominal CPU voltage in centivolts for the concentrator."
   ::= { alStatsHardwareGlobal 61 }

alHardwareClientEthPrivSwitch OBJECT-TYPE
   SYNTAX         TruthValue
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "Whether or not the 3002 Hardware Client has an Ethernet Switch for
       the private interface."
   ::= { alStatsHardwareGlobal 62 }

alHardwareSerialNumber     OBJECT-TYPE
   SYNTAX         DisplayString
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "Unit serial number."
   ::= { alStatsHardwareGlobal 63 }

altigaHardwareStatsMibConformance OBJECT IDENTIFIER
   ::= { altigaHardwareStatsMibModule 1 }

altigaHardwareStatsMibCompliances OBJECT IDENTIFIER
   ::= { altigaHardwareStatsMibConformance 1 }

altigaHardwareStatsMibCompliance MODULE-COMPLIANCE
   STATUS         current
   DESCRIPTION
      "The compliance statement for agents which 
       implement the Altiga Hardware Statistics MIB."
   MODULE
   MANDATORY-GROUPS { 
      altigaHardwareStatsGroup
   }
   ::= { altigaHardwareStatsMibCompliances 1 }

altigaHardwareStatsGroup OBJECT-GROUP
   OBJECTS
   {
      alHardwareCpuVoltage,
      alHardwareCpuVoltageAlarm,
      alHardwareCpuVoltageCount,
      alHardwareCpuVoltageTime,
      alHardwarePs1Voltage3v,
      alHardwarePs1Voltage3vAlarm,
      alHardwarePs1Voltage3vCount,
      alHardwarePs1Voltage3vTime,
      alHardwarePs1Voltage5v,
      alHardwarePs1Voltage5vAlarm,
      alHardwarePs1Voltage5vCount,
      alHardwarePs1Voltage5vTime,
      alHardwarePs2Voltage3v,
      alHardwarePs2Voltage3vAlarm,
      alHardwarePs2Voltage3vCount,
      alHardwarePs2Voltage3vTime,
      alHardwarePs2Voltage5v,
      alHardwarePs2Voltage5vAlarm,
      alHardwarePs2Voltage5vCount,
      alHardwarePs2Voltage5vTime,
      alHardwareBoardVoltage3v,
      alHardwareBoardVoltage3vAlarm,
      alHardwareBoardVoltage3vCount,
      alHardwareBoardVoltage3vTime,
      alHardwareBoardVoltage5v,
      alHardwareBoardVoltage5vAlarm,
      alHardwareBoardVoltage5vCount,
      alHardwareBoardVoltage5vTime,
      alHardwareCpuTemp,
      alHardwareCpuTempAlarm,
      alHardwareCpuTempCount,
      alHardwareCpuTempTime,
      alHardwareCageTemp,
      alHardwareCageTempAlarm,
      alHardwareCageTempCount,
      alHardwareCageTempTime,
      alHardwareFan1Rpm,
      alHardwareFan1RpmAlarm,
      alHardwareFan1RpmCount,
      alHardwareFan1RpmTime,
      alHardwareFan2Rpm,
      alHardwareFan2RpmAlarm,
      alHardwareFan2RpmCount,
      alHardwareFan2RpmTime,
      alHardwareFan3Rpm,
      alHardwareFan3RpmAlarm,
      alHardwareFan3RpmCount,
      alHardwareFan3RpmTime,
      alHardwarePs1Type,
      alHardwarePs2Type,
      alHardwareSlot1Card,
      alHardwareSlot2Card,
      alHardwareSlot3Card,
      alHardwareSlot4Card,
      alHardwareSlot1Operational,
      alHardwareSlot2Operational,
      alHardwareSlot3Operational,
      alHardwareSlot4Operational,
      alHardwareRamSize,
      alHardwareChassis,
      alHardwareCpuVoltageNominal,
      alHardwareClientEthPrivSwitch,
      alHardwareSerialNumber
   }
   STATUS   current
   DESCRIPTION
      "The objects for Hardware statistics."
   ::= { alHardwareGroup 2 }

END




Get latest updates about Open Source Projects, Conferences and News.

Sign up for the SourceForge newsletter:

JavaScript is required for this form.





No, thanks