[17d1ee]: ibm / GbTOR-10G-L2L3.mib  Maximize  Restore  History

Download this file

55577 lines (48910 with data), 1.6 MB

-- ----------------------------------------------------------------------------
-- File Main Owner: 
-- File Peer Owner:   
-- File Description:  Main entry point to build private MIBs.
--                    
--
-- { COPYRIGHT / HISTORY
--
--
--
-- PORTING HISTORY
--
-- } COPYRIGHT / HISTORY (end)
--

-- ----------------------------------------------------------------------------
-- { INSERT:  blade
-- ----------------------------------------------------------------------------

IBM-GbTOR-10G-L2L3-MIB DEFINITIONS ::= BEGIN

IMPORTS
    OBJECT-TYPE, Integer32, Unsigned32, Counter32, Gauge32, Counter64,
    TimeTicks, IpAddress
        FROM SNMPv2-SMI
    DisplayString, PhysAddress, MacAddress, TruthValue, RowStatus
        FROM SNMPv2-TC
    BridgeId
        FROM BRIDGE-MIB
    sysName, sysLocation, sysContact, ifIndex
        FROM RFC1213-MIB
    enterprises 
        FROM RFC1155-SMI
    InetAddressType, InetAddress, InetAddressIPv6
        FROM INET-ADDRESS-MIB
    OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY,
    Integer32, Unsigned32, Counter32, Gauge32, Counter64,
    TimeTicks, IpAddress, mib-2
        FROM SNMPv2-SMI
    TEXTUAL-CONVENTION, TruthValue, DisplayString, PhysAddress,
    MacAddress, RowStatus, TimeInterval, TimeStamp, RowPointer,
    AutonomousType, StorageType, TDomain, TAddress
        FROM SNMPv2-TC
    MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
        FROM SNMPv2-CONF
    BridgeId, dot1dTp, dot1dTpPort, dot1dBridge, dot1dBasePortEntry,
    dot1dBasePort
        FROM BRIDGE-MIB
    EnabledStatus
        FROM P-BRIDGE-MIB
    PortList
        FROM Q-BRIDGE-MIB
    SnmpAdminString, SnmpEngineID,SnmpMessageProcessingModel,
     SnmpSecurityModel,SnmpSecurityLevel  FROM SNMP-FRAMEWORK-MIB
    usmNoAuthProtocol, usmNoPrivProtocol  FROM SNMP-USER-BASED-SM-MIB
    sysName, sysLocation, sysContact, ifIndex
        FROM RFC1213-MIB
    InterfaceIndex, InterfaceIndexOrZero
        FROM IF-MIB
    InetAddressType, InetAddress
        FROM INET-ADDRESS-MIB
    ;

-- ----------------------------------------------------------------------------
-- { INSERT: module identity 
-- ----------------------------------------------------------------------------

ibmGbTORG8124MIB MODULE-IDENTITY
         LAST-UPDATED "201308142148Z"    -- Aug 14, 2013 09:48:33 PM
         ORGANIZATION "IBM/System Networking"
         CONTACT-INFO "
                IBM/System Networking 
                4400 North First Street
                San Jose, CA 95134
                408-956-3239
                "             
         DESCRIPTION " 
         MIB for IBM Networking Operating System RackSwitch G8124 
         All Rights reserved
         DEVICE VERSION: 7.7.5.0
                "
          ::= { blade 3 }

-- ----------------------------------------------------------------------------
-- } INSERT: module identity 
-- ----------------------------------------------------------------------------


-- ----------------------------------------------------------------------------
-- { INSERT:  textual conventions
-- ----------------------------------------------------------------------------

PortNumber ::= TEXTUAL-CONVENTION
    STATUS        current
    DESCRIPTION
                  "Represents a port number of a switch."
    SYNTAX        Unsigned32

VlanId ::= TEXTUAL-CONVENTION
    DISPLAY-HINT  "d"
    STATUS      current
    DESCRIPTION
        "A 12-bit VLAN ID used in the VLAN Tag header."
    SYNTAX      Integer32 (1..4094)


Timeout ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "d4"
    STATUS       current
    DESCRIPTION
                " Time out value in 4 byte"
    SYNTAX       Integer32


-- ----------------------------------------------------------------------------
-- } INSERT:  textual conventions
-- ----------------------------------------------------------------------------


-- blade OID reference  http://www.iana.org/assignments/enterprise-numbers
-- defined in /vobs/webos/src/lib/epi/target/h/wrn/wm/snmp/engine/mib.h

blade                   OBJECT IDENTIFIER ::= { enterprises 26543 }

-- Groups in blade
registration            OBJECT IDENTIFIER ::= { blade 1 }
private-mibs            OBJECT IDENTIFIER ::= { blade 2 }




-- Access Switch for BNT Private MIBs
-- bnt-switch           OBJECT IDENTIFIER ::= { private-mibs 7 }
-- ----------------------------------------------------------------------------
-- { INSERT:  bntRoot
-- ----------------------------------------------------------------------------

-- Access Web Switch Module for Private MIBs
ibm-switch-mgmt  OBJECT IDENTIFIER
    ::= { private-mibs 7 }

g8124-mgmt  OBJECT IDENTIFIER
    ::= { ibm-switch-mgmt 4 }




-------------------------------------------------------------------------------
-- Platform Dependent Registration sysObjectID
-- Must correspond to g_sysobjid in /vobs/webos/src/<bert>/ts/mp/sys/config.c
-- and defined in /vobs/webos/src/lib/epi/target/h/wrn/wm/snmp/engine/mib.h.
-- Careful when re-numbering sysObjectIDs due to hard coded references in
-- /vobs/webos/src/<bert>/ts/mp/epi/trap.c
-------------------------------------------------------------------------------

-- Top of Rack Switch
ibm-switch  OBJECT IDENTIFIER
    ::= { registration 7 }

g8124  OBJECT IDENTIFIER
    ::= { ibm-switch 4 }  -- G8124 switch

-------------------------------------------------------------------------------
-- Platform Common Private MIBs for g8124-mgmt
-------------------------------------------------------------------------------
agent                   OBJECT IDENTIFIER ::= { g8124-mgmt 1 }
-- ----------------------------------------------------------------------------
-- { INSERT:  agent
-- ----------------------------------------------------------------------------

agentConfig       OBJECT IDENTIFIER ::= { agent 1 }
agentStats        OBJECT IDENTIFIER ::= { agent 2 }
agentInfo         OBJECT IDENTIFIER ::= { agent 3 }
agentOper         OBJECT IDENTIFIER ::= { agent 4 }

agSystem          OBJECT IDENTIFIER ::= { agentConfig 1 }
agPortConfig      OBJECT IDENTIFIER ::= { agentConfig 2 }
agRadiusConfig    OBJECT IDENTIFIER ::= { agentConfig 3 }
agNTP             OBJECT IDENTIFIER ::= { agentConfig 4 }
agSyslog          OBJECT IDENTIFIER ::= { agentConfig 5 }
agTransfer        OBJECT IDENTIFIER ::= { agentConfig 7 }
agApply           OBJECT IDENTIFIER ::= { agentConfig 8 }
agTacacsConfig    OBJECT IDENTIFIER ::= { agentConfig 11 }
agMgmtNetConfig   OBJECT IDENTIFIER ::= { agentConfig 12 }
agBoot            OBJECT IDENTIFIER ::= { agentConfig 13 }
agAccess          OBJECT IDENTIFIER ::= { agentConfig 19 }
agLdapConfig      OBJECT IDENTIFIER ::= { agentConfig 21 }
agSSHConfig       OBJECT IDENTIFIER ::= { agentConfig 22 }
agsFlowConfig     OBJECT IDENTIFIER ::= { agentConfig 24 }



pktStats          OBJECT IDENTIFIER ::= { agentStats 1 }
mpCpuStats        OBJECT IDENTIFIER ::= { agentStats 2 }
portStats         OBJECT IDENTIFIER ::= { agentStats 3 }
agClearStats      OBJECT IDENTIFIER ::= { agentStats 7 }
ntpStats          OBJECT IDENTIFIER ::= { agentStats 9 }
aclStats          OBJECT IDENTIFIER ::= { agentStats 11 }
memoryStats       OBJECT IDENTIFIER ::= { agentStats 12 }
snmpStats         OBJECT IDENTIFIER ::= { agentStats 20 }
mpTcbStats        OBJECT IDENTIFIER ::= { agentStats 21 }
mpUdpStats        OBJECT IDENTIFIER ::= { agentStats 22 }

hardware          OBJECT IDENTIFIER ::= { agentInfo 1 }
portInfo          OBJECT IDENTIFIER ::= { agentInfo 2 }
agDiff            OBJECT IDENTIFIER ::= { agentInfo 4 }
agCfgDump         OBJECT IDENTIFIER ::= { agentInfo 5 }
geaportInfo       OBJECT IDENTIFIER ::= { agentInfo 9 }
sfpInfo           OBJECT IDENTIFIER ::= { agentInfo 11 }


accessInfo        OBJECT IDENTIFIER ::= { agentInfo 13 }

agNTPOper         OBJECT IDENTIFIER ::= { agentOper 2 }

-- There are two configuration blocks.
-- The "current_config" reflects the configuration parameters that the
-- switch is operating on and it is read-only.  The objects with "CurCfg"
-- in the name are reflect to this configuration block.
--
-- The "new_config" accepts user configurations on set.  The objects with
-- "NewCfg" in the name are reflect to this configuration block.
--
-- The newly set configurations will not take effect until a "apply"
-- command has been issued (See agApplyConfiguration object)
--
-- The newly set configurations will not be saved through next restarting
-- of the switch unless a "save" command has been issued (See
-- agSaveConfiguration object).

-- Hardware Information

hwPartNumber OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..16))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The hardware part number of the Switch."
    ::= { hardware 1 }

hwRevision OBJECT-TYPE
    SYNTAX DisplayString (SIZE(0..16))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"The hardware revision.  If the revision is not
	 available, a zero length string should be returned."
    ::= { hardware 2 }


hwFanStatus OBJECT-TYPE
    SYNTAX DisplayString (SIZE(0..255))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The fan status on the system."
    ::= { hardware 12 }

hwFanSpeed OBJECT-TYPE
    SYNTAX DisplayString (SIZE(0..255))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The fan speed on the system."
    ::= { hardware 13 }
hwTempSensors OBJECT-TYPE
    SYNTAX DisplayString (SIZE(0..255))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The temperature sensors on the system."
    ::= { hardware 14 }
hwGlobalHealthStatus OBJECT-TYPE
    SYNTAX  INTEGER {
        ok(1),
        noncritical(2),
        critical(3)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "
       This variable summarizes the statuses of several key elements of the device.
       OK:
          - All temperature sensors are below the warning threshold (eg. < 85 C);
          - All fans are running at >= 100 RPMs;
          - Both power supplies are on;
          - No panic dump exists in flash.
       Non-critical:
          - One or more temperature sensors is in the warning range (eg. >= 85 and < 100 C);
          - A panic dump exists in flash.
       Critical:
          - One or more temperature sensors is in the failure range (eg. >= 100 C);
          - One or more fans are running < 100 RPM;
          - One power supply is off.
         "
    ::= { hardware 15 }

hwMainBoardRevision OBJECT-TYPE
    SYNTAX DisplayString (SIZE(0..16))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The main board revision. If the revision is not
     available, a zero length string should be returned."
    ::= { hardware 11 }



    -- Port operation table
    agPortOperTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF AgPortOperTableEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
	    "The table of port operations."
	::= { agentOper 1 }

    agPortOperTableEntry OBJECT-TYPE
	SYNTAX  AgPortOperTableEntry
	MAX-ACCESS  not-accessible
	STATUS  current
	DESCRIPTION
	    "A row in the port operations table."
	INDEX   { portOperIdx }
	::= { agPortOperTable 1 }

    AgPortOperTableEntry ::=
	SEQUENCE {
	    portOperIdx	    PortNumber,
	    portOperRmon	    INTEGER,
	    portOperLearning    INTEGER,
	    portOperState	    INTEGER
	}

    portOperIdx OBJECT-TYPE
	SYNTAX  PortNumber
	MAX-ACCESS  read-only
	STATUS  current
	DESCRIPTION
	    "The port index."
	::= { agPortOperTableEntry 1 }

    portOperState OBJECT-TYPE
	SYNTAX  INTEGER {
	    enabled(1),
	    disabled(2)
	    }
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
	    "Enable/Disable port."
	::= { agPortOperTableEntry 2 }

    portOperRmon OBJECT-TYPE
	SYNTAX  INTEGER {
	    enabled(1),
	    disabled(2)
	    }
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
	    "Enable/Disable RMON for port."
	::= { agPortOperTableEntry 3 }

    portOperLearning OBJECT-TYPE
	SYNTAX  INTEGER {
	    enabled(1),
	    disabled(2)
	    }
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
	    "Enable/Disable L2 (FDB) Learning for this port."
	::= { agPortOperTableEntry 4 }


    ntpOperSendReq OBJECT-TYPE
	SYNTAX  INTEGER {
	    no(1),
	    yes(2)
	    }
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
	    "Allows the user to send requests to the NTP server."
	::= { agNTPOper 1 }

-- Oper PRM settings



-- Port information table

portInfoTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF PortInfoTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table of port information."
    ::= { portInfo 1 }

portInfoTableEntry OBJECT-TYPE
    SYNTAX  PortInfoTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A row in the port information table."
    INDEX   { portInfoIndx }
    ::= { portInfoTable 1 }

PortInfoTableEntry ::= SEQUENCE {
    portInfoIndx                PortNumber,
    portInfoSpeed               INTEGER,
    portInfoMode                INTEGER,
    portInfoFlowCtrl            INTEGER,
    portInfoLink                INTEGER,
    portInfoPhyIfDescr          DisplayString,
    portInfoPhyIfType           INTEGER,
    portInfoPhyIfMtu            Integer32,
    portInfoPhyIfPhysAddress    PhysAddress,
    portInfoPhyIfOperStatus     INTEGER,
    portInfoPhyIfLastChange     TimeTicks,
    portInfoLearning            INTEGER,
    portInfoBpduGuard           INTEGER,
    portInfoPvid                Unsigned32,
    portInfoVlanTag             INTEGER
   ,portInfoErrDisableRecovery  INTEGER
   ,portInfoErrDisableTimeLeft  INTEGER
   ,portInfoExtGuard            INTEGER
   ,portInfoLFDState            INTEGER
    }

portInfoIndx OBJECT-TYPE
    SYNTAX  PortNumber
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The port index."
    ::= { portInfoTableEntry 1 }

portInfoSpeed OBJECT-TYPE
    SYNTAX  INTEGER {
        mbs10(2),
        mbs100(3),
        mbs1000(4),
        any(5)
	,
        mbs10000(6)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The current operational speed of the port."
    ::= { portInfoTableEntry 2 }

portInfoMode OBJECT-TYPE
    SYNTAX  INTEGER {
        full-duplex(2),
        half-duplex(3)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The current operational mode of the port."
    ::= { portInfoTableEntry 3 }

portInfoFlowCtrl OBJECT-TYPE
    SYNTAX  INTEGER {
        transmit(2),
        receive(3),
        both(4),
        none(5)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The current operational flow control of the port."
    ::= { portInfoTableEntry 4 }

portInfoLink OBJECT-TYPE
    SYNTAX  INTEGER {
        up(1),
        down(2),
        disabled(3),
        inoperative(4), -- unrecognized PCI device
        errdisabled(5)
        }
     MAX-ACCESS  read-only
     STATUS  current
     DESCRIPTION
         "The current operational link status of the port."
     ::= { portInfoTableEntry 5 }

portInfoPhyIfDescr OBJECT-TYPE
    SYNTAX  DisplayString (SIZE (0..255))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
	    "A textual string containing information about the
	    interface.  This string should include the name of
	    the manufacturer, the product name and the version
	    of the hardware interface."
    ::= { portInfoTableEntry 6 }

portInfoPhyIfType OBJECT-TYPE
    SYNTAX  INTEGER {
		other(1),          -- none of the following
		regular1822(2),
		hdh1822(3),
		ddn-x25(4),
		rfc877-x25(5),
		ethernet-csmacd(6),
		iso88023-csmacd(7),
		iso88024-tokenBus(8),
		iso88025-tokenRing(9),
		iso88026-man(10),
		starLan(11),
		proteon-10Mbit(12),
		proteon-80Mbit(13),
		hyperchannel(14),
		fddi(15),
		lapb(16),
		sdlc(17),
		ds1(18),           -- T-1
		e1(19),            -- european equiv. of T-1
		basicISDN(20),
		primaryISDN(21),   -- proprietary serial
		propPointToPointSerial(22),
		ppp(23),
		softwareLoopback(24),
		eon(25),            -- CLNP over IP [11]
		ethernet-3Mbit(26),
		nsip(27),           -- XNS over IP
		slip(28),           -- generic SLIP
		ultra(29),          -- ULTRA technologies
		ds3(30),            -- T-3
		sip(31),            -- SMDS
		frame-relay(32)
	    }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
	    "The type of interface, distinguished according to
	    the physical/link protocol(s) immediately `below'
	    the network layer in the protocol stack."
    ::= { portInfoTableEntry 7 }

portInfoPhyIfMtu OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
	    "The size of the largest datagram which can be
	    sent/received on the interface, specified in
	    octets.  For interfaces that are used for
	    transmitting network datagrams, this is the size
	    of the largest network datagram that can be sent
	    on the interface."
    ::= { portInfoTableEntry 8 }

portInfoPhyIfPhysAddress OBJECT-TYPE
    SYNTAX  PhysAddress
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
	    "The interface's address at the protocol layer
	    immediately `below' the network layer in the
	    protocol stack.  For interfaces which do not have
	    such an address (e.g., a serial line), this object
	    should contain an octet string of zero length."
    ::= { portInfoTableEntry 9 }

portInfoPhyIfOperStatus OBJECT-TYPE
    SYNTAX  INTEGER {
	up(1),       -- ready to pass packets
	down(2),
	testing(3)   -- in some test mode
	}
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
	    "The current operational state of the interface.
	    The testing(3) state indicates that no operational
	    packets can be passed."
    ::= { portInfoTableEntry 10 }

portInfoPhyIfLastChange OBJECT-TYPE
    SYNTAX  TimeTicks
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
	    "The value of sysUpTime at the time the interface
	    entered its current operational state.  If the
	    current state was entered prior to the last re-
	    initialization of the local network management
	    subsystem, then this object contains a zero
	    value."
    ::= { portInfoTableEntry 11 }


portInfoLearning OBJECT-TYPE
    SYNTAX  INTEGER {
		enabled(1),
		disabled(2)
	    }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
	    "The port L2 (FDB) Learning state."
    ::= { portInfoTableEntry 18 }

portInfoBpduGuard OBJECT-TYPE
    SYNTAX INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The operational status of BPDU Guard on the port."
    ::= { portInfoTableEntry 20 }

portInfoPvid    OBJECT-TYPE
    SYNTAX  Unsigned32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "This is the operational port vlan-id of the port. Typically,
         the value of this object is the same as the value of the
         agPortCurCfgPVID object. But if, for example, 802.1x is
         enabled on the port and the port is assigned a vlan-id via
         802.1x, this port will be moved to the assigned vlan even
         when the port is configured with a different PVID."
    ::= { portInfoTableEntry 21}

portInfoVlanTag OBJECT-TYPE
    SYNTAX  INTEGER {
        untagged(0),
        tagged(1)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "This is the operational VLAN tag state of the port. Typically,
         the value of this object is the same as the value of the
         agPortCurCfgVlanTag objec. But if, for example, 802.1x is
         enabled on the port and if the port is assigned a vlan via
         802.1x, the port will be operationally untagged even when the
         port is configured to be tagged."
    ::= { portInfoTableEntry 22}

portInfoErrDisableRecovery OBJECT-TYPE
    SYNTAX      INTEGER {
                    enable(1),
                    disable(2)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object indicates whether the system will automatically
         re-enable an error-disabled port after the time interval
         indicated by agCurCfgErrDisableTimeout has elapsed. A port
         is in error-disabled state when it has been operationally
         disabled by the system due to an error condition.

         The value of this object is 'enable' if the values of both
         the global agCurCfgErrDisableRecovery object and the port's
         agPortCurCfgErrDisableRecovery object are 'enable'."
    ::= { portInfoTableEntry 23 }

portInfoErrDisableTimeLeft OBJECT-TYPE
    SYNTAX      INTEGER (0 .. 86400)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "If the portInfoErrDisableRecovery object has a value of 'enable'
         and the portInfoLink object has a value of 'errdisabled', the
         value of this object indicates the remaining time, in seconds,
         before the system automatically re-enables this port."
    ::= { portInfoTableEntry 24 }

portInfoExtGuard OBJECT-TYPE
    SYNTAX INTEGER {
        loop(1),
        root(2),
        global-loop(3),
        no-guard(0)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The operational status of STP Loop/Root Guard on the port."
    ::= { portInfoTableEntry 25 }


portInfoLFDState OBJECT-TYPE
    SYNTAX      INTEGER {
                    yes(1),
                    no(2)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object indicates whether the port is error-disabled due
         to excessive link flaps.  The value of this object is 'yes'
         if the port is error-disabled due to excessive link flaps,
         otherwise the value is 'no'."
    ::= { portInfoTableEntry 26 }







-- Agent System Group
-- This group of objects take effect on the 'SET' request.
-- There is no need to 'apply' or 'save'.

agApplyConfiguration OBJECT-TYPE
    SYNTAX  INTEGER {
        other(1),
        apply(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "This is an action object to apply the changes made to configuration
         of the switch. By setting the value to apply(2), all the changes
         made since the last apply are written to the new configuration block.

         other(1) is returned when this object ie read. "
    ::= { agSystem 2 }

agSavePending OBJECT-TYPE
    SYNTAX  INTEGER {
        saveNeeded(1),
        noSaveNeeded(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "This object, when read, gives the user information
         whether an save action is needed and that the configuration
         has been applied but not saved to the flash."
    ::= { agSystem 3 }

agSaveConfiguration OBJECT-TYPE
    SYNTAX  INTEGER {
        ok(1),
        saveActive(2),
        notSaveActive(3)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "This is an action object to write current configuration to
         nonvolatile storage.

         When issued with the saveActive, the active configuration
         in flash is saved to backup in flash and then the new
         configuration is saved to the active configuration in flash.

         When issued with notSaveActive, the active configuration
         is NOT saved to the flash and the active configuration is
         overwritten with the new configuration.

         ok(1) is returned always when read."
    ::= { agSystem 4 }

agRevert OBJECT-TYPE
    SYNTAX  INTEGER {
        other(1),
        revert(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "This is an action object to revert the unapplied changes
         made to the switch. By setting the value to revert(2),
         all the unapplied changes will be reverted. This action
         will copy the current_config to the new configuration block.

         other(1) is returned when this object is read. "
    ::= { agSystem 5 }

agRevertApply OBJECT-TYPE
    SYNTAX  INTEGER {
        other(1),
        revertApply(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "This is an action object to revert the unsaved changes
         made to the switch. By setting the value to revertApply(2),
         all the unsaved as well as unapplied changes will be
         reverted.

         other(1) is returned when this object is read. "
    ::= { agSystem 6 }

agReset OBJECT-TYPE
    SYNTAX  INTEGER {
        other(1),
        reset(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "This is an action object to reboot the agent.
         other(1) is returned always when read."
    ::= { agSystem 7 }

agConfigForNxtReset OBJECT-TYPE
    SYNTAX  INTEGER {
        active(2),
        backup(3),
        default(4)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The configuration information to be loaded from at next reset.

          The following values are writable:
              active(2)...active configuration block
              backup(3)...backup configuration block
              default(4)..default configuration block"
    ::= { agSystem 8 }

agImageForNxtReset OBJECT-TYPE
    SYNTAX  INTEGER {
        image1(2),
        image2(3)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The software image to be booted from at next reset.

         The following values are writable:
             image1(2)...image 1
             image2(3)...image 2"
    ::= { agSystem 9 }

agSoftwareVersion OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..16))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The version of the software image that is currently running on the
         system in the form of 'major.minor.maintenance.bugfix'.  A zero
         length string is returned if version is not available."
    ::= { agSystem 10 }

agBootVer OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..16))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The version of the boot code in the form of 'major.minor.bugfix'.
         A zero length string is returned if version is not available."
    ::= { agSystem 11 }

agImage1Ver OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..128))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The version of the software image stored in image 1 storage in the
         form of 'major.minor.bugfix'.  A zero length string is returned if
         version is not available or there is no valid software image."
    ::= { agSystem 12 }

agImage2Ver OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..128))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The version of the software image stored in image 2 storage in the
         form of 'major.minor.bugfix'.  A zero length string is returned if
         version is not available or there is no valid software image."
    ::= { agSystem 13 }

agRtcDate OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..16))
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The date on the real time clock in the form of 'mm/dd/yy'.
         A zero length string is returned if date is not available."
    ::= { agSystem 14 }

agRtcTime OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..16))
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The time on the real time clock in the form of 'hh:mm:ss'.
         A zero length string is returned if time is not available."
    ::= { agSystem 15 }

agLastSetErrorReason   OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..255))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The error reason of the last SET failure."
    ::= { agSystem 16 }

agCurCfgHttpServerPort OBJECT-TYPE
    SYNTAX  INTEGER (1..65535)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The TCP port number that the HTTP server is listening to
         in the current configuration block."
    ::= { agSystem 17 }

agNewCfgHttpServerPort OBJECT-TYPE
    SYNTAX  INTEGER (1..65535)
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The TCP port number that the HTTP server is listening to
         in the new configuration block."
    ::= { agSystem 18 }

agCurCfgLoginBanner OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..80))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The user defined login banner."
    ::= { agSystem 19 }

agNewCfgLoginBanner OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..80))
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The user defined login banner."
    ::= { agSystem 20 }

agCurCfgLoginNotice OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..80))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The user defined login notice."
    ::= { agSystem 78 }

agNewCfgLoginNotice OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..80))
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The user defined login notice."
    ::= { agSystem 79 }


agCurCfgConsole OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable console output of syslog messages."
    ::= { agSystem 23 }

agNewCfgConsole OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable or disable console output of syslog messages."
    ::= { agSystem 24 }


agCurCfgBootp OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(2),
        disabled(3)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable the use of BootP, as currently configured in the
         current configuration block."
    ::= { agSystem 29 }

agNewCfgBootp OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(2),
        disabled(3)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable or disable the use of BootP, in the new configuration block."
    ::= { agSystem 30 }

agSlotNumber OBJECT-TYPE
    SYNTAX INTEGER (1..10)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Identifies the slot in which this switch is installed. If the
         agent implementing this MIB is not a blade in a chassis this
         value has no meaning."
    ::= { agSystem 31 }

agCurCfgSnmpTimeout OBJECT-TYPE
    SYNTAX  INTEGER (1..30)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Once SNMP operations like agApplyConfig, agDiffState and
         agDumpState, which use the state machine are done the resources
         used by these operations need to be freed by setting the state
         back to 'idle' so others can issue the commands via SNMP.
         agSnmpTimeout indicates the number of minutes before the resources
         are freed and the state set back to 'idle' if this operation is not
         performed by the user."
    ::= { agSystem 32 }

agNewCfgSnmpTimeout OBJECT-TYPE
    SYNTAX  INTEGER (1..30)
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Once SNMP operations like agApplyConfig, agDiffState and
         agDumpState, which use the state machine are done the resources
         used by these operations need to be freed by setting the state
         back to 'idle' so others can issue the commands via SNMP.
         agSnmpTimeout indicates the number of minutes before the resources
         are freed and the state set back to 'idle' if this operation is not
         performed by the user."
    ::= { agSystem 33 }

agCurCfgTelnetServerPort OBJECT-TYPE
    SYNTAX  INTEGER (1..65535)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The TCP port number that the telnet server listens for telnet
         sessions."
    ::= { agSystem 34 }

agNewCfgTelnetServerPort OBJECT-TYPE
    SYNTAX  INTEGER (1..65535)
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The TCP port number that the telnet server listens for telnet
         sessions."
    ::= { agSystem 35 }

agClearFlashDump OBJECT-TYPE
    SYNTAX  INTEGER {
        ok(1),
        clear(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "This is an action object to clear the FLASH dump.
         ok(1) is returned when this object is read. "
    ::= { agSystem 36 }


agCurCfgTrapSrcIf OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The SNMP trap source interface number."
    ::= { agSystem 39 }

agNewCfgTrapSrcIf OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The SNMP trap source interface number."
    ::= { agSystem 40 }


agCurCfgHttpsServerPort OBJECT-TYPE
    SYNTAX  INTEGER (1..65535)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The TCP port number that the HTTPS server is listening to
         in the current configuration block."
    ::= { agSystem 49 }

agNewCfgHttpsServerPort OBJECT-TYPE
    SYNTAX  INTEGER (1..65535)
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The TCP port number that the HTTPS server is listening to
         in the new configuration block."
    ::= { agSystem 50 }

agCurCfgTftpServerPort OBJECT-TYPE
    SYNTAX  INTEGER (1..65535)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The TCP port number that the TFTP server is listening to
         in the current configuration block."
    ::= { agSystem 51 }

agNewCfgTftpServerPort OBJECT-TYPE
    SYNTAX  INTEGER (1..65535)
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The TCP port number that the TFTP server is listening to
         in the new configuration block."
    ::= { agSystem 52 }

agRackId OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..127))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The rack unique identifier."
    ::= { agSystem 53 }

agChassis OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..127))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Chassis serial number."
    ::= { agSystem 54 }

agCurDaylightSavings   OBJECT-TYPE
    SYNTAX  INTEGER {
    none(0),
    africa-Algeria(1),
    africa-Angola(2),
    africa-Benin(3),
    africa-Botswana(4),
    africa-Burkina-Faso(5),
    africa-Burundi(6),
    africa-Cameroon(7),
    africa-Central-African-Rep(8),
    africa-Chad(9),
    africa-Congo-WestDemRepCongo(10),
    africa-Congo-EastDemRepCongo(11),
    africa-Congo-Rep(12),
    africa-Cote-dIvoire(13),
    africa-Djibouti(14),
    africa-Egypt(15),
    africa-Equatorial-Guinea(16),
    africa-Eritrea(17),
    africa-Ethiopia(18),
    africa-Gabon(19),
    africa-Gambia(20),
    africa-Ghana(21),
    africa-Guinea(22),
    africa-Guinea-Bissau(23),
    africa-Kenya(24),
    africa-Lesotho(25),
    africa-Liberia(26),
    africa-Libya(27),
    africa-Malawi(28),
    africa-Mali-SouthWestMali(29),
    africa-Mali-NorthEastMali(30),
    africa-Mauritania(31),
    africa-Morocco(32),
    africa-Mozambique(33),
    africa-Namibia(34),
    africa-Niger(35),
    africa-Nigeria(36),
    africa-Rwanda(37),
    africa-SaoTome-And-Principe(38),
    africa-Senegal(39),
    africa-SierraLeone(40),
    africa-Somalia(41),
    africa-SouthAfrica(42),
    africa-Spain-Mainland(43),
    africa-Spain-CeutaMelilla(44),
    africa-Spain-CanaryIslands(45),
    africa-Sudan(46),
    africa-Swaziland(47),
    africa-Tanzania(48),
    africa-Togo(49),
    africa-Tunisia(50),
    africa-Uganda(51),
    africa-Western-Sahara(52),
    africa-Zambia(53),
    africa-Zimbabwe(54),
    americas-Anguilla(55),
    americas-Antigua-Barbuda(56),
    americas-Argentina-EArgentina(57),
    americas-Argentina-MostLocations(58),
    americas-Argentina-Jujuy(59),
    americas-Argentina-Catamarca(60),
    americas-Argentina-Mendoza(61),
    americas-Aruba(62),
    americas-Bahamas(63),
    americas-Barbados(64),
    americas-Belize(65),
    americas-Bolivia(66),
    americas-Brazil-AtlanticIslands(67),
    americas-Brazil-AmapaEPara(68),
    americas-Brazil-NEBrazil(69),
    americas-Brazil-Pernambuco(70),
    americas-Brazil-Tocantins(71),
    americas-Brazil-AlagoasSergipe(72),
    americas-Brazil-SSEBrazil(73),
    americas-Brazil-MatoGrossoDoSul(74),
    americas-Brazil-WParaRondonia(75),
    americas-Brazil-Roraima(76),
    americas-Brazil-EAmazonas(77),
    americas-Brazil-WAmazonas(78),
    americas-Brazil-Acre(79),
    americas-Canada-NewfoundlandIsland(80),
    americas-Canada-AtlanTime-NovaScotia(81),
    americas-Canada-AtlanTime-ELabrador(82),
    americas-Canada-EastTime-OntarioMostlocation(83),
    americas-Canada-EastTime-ThunderBay(84),
    americas-Canada-EastStdTime-PangnirtungNunavut(85),
    americas-Canada-EastStdTime-EastNunavut(86),
    americas-Canada-EastStdTime-CenNunavut(87),
    americas-Canada-CenTime-ManitobaWestOntario(88),
    americas-Canada-CenTime-RainyRiver(89),
    americas-Canada-CenTime-WestNunavut(90),
    americas-Canada-CenStdTime-SaskatchewanMostlocation(91),
    americas-Canada-CenStdTime-SaskatchewanMidwest(92),
    americas-Canada-MountTime-AlbertaEastBritishColumbia(93),
    americas-Canada-MountTime-CentralNorthwestTerritories(94),
    americas-Canada-MountTime-WestNorthwestTerritories(95),
    americas-Canada-MountStdTime-DawsonCrkStJohnBritColumbia(96),
    americas-Canada-PacificTime-WestBritishColumbia(97),
    americas-Canada-PacificTime-SouthYukon(98),
    americas-Canada-PacificTime-NorthYukon(99),
    americas-CaymanIslands(100),
    americas-Chile-MostLocation(101),
    americas-Chile-EasterIsland(102),
    americas-Colombia(103),
    americas-CostaRica(104),
    americas-Cuba(105),
    americas-Dominica(106),
    americas-DominicanRepublic (107),
    americas-Ecuador(108),
    americas-ElSalvado(109),
    americas-FrenchGuiana(110),
    americas-Greenland-MostLocation(111),
    americas-Greenland-EastCoastNorthScoresbysund(112),
    americas-Greenland-ScoresbysundIttoqqortoormiit(113),
    americas-Greenland-ThulePituffik(114),
    americas-Grenada(115),
    americas-Guadeloupe(116),
    americas-Guatemala(117),
    americas-Guyana(118),
    americas-Haiti(119),
    americas-Honduras(120),
    americas-Jamaica(121),
    americas-Martinique(122),
    americas-Mexico-CentTime-Mostlocations(123),
    americas-Mexico-CentTime-QuintanaRoo(124),
    americas-Mexico-CentTime-CampecheYucatan(125),
    americas-Mexico-CentTime-CoahuilaDurNuevoLeonTam(126),
    americas-Mexico-MountTime-SBajaNayaritSinaloa(127),
    americas-Mexico-MountTime-Chihuahua(128),
    americas-Mexico-MountStdTime-Sonora(129),
    americas-Mexico-PacificTime(130),
    americas-Montserrat(131),
    americas-NetherlandsAntilles(132),
    americas-Nicaragua(133),
    americas-Panama(134),
    americas-Paraguay(135),
    americas-Peru(136),
    americas-PuertoRico(137),
    americas-StKittsAndNevis(138),
    americas-StLucia(139),
    americas-StPierreAndMiquelon(140),
    americas-StVincent(141),
    americas-Suriname(142),
    americas-TrinidadAndTobago(143),
    americas-TurksAndCaicosIs(144),
    americas-USA-EastTime(145),
    americas-USA-EastTime-MichiganMostLocation(146),
    americas-USA-EastTime-KentuckyLouisvilleArea(147),
    americas-USA-EastTime-KentuckyWayneCounty(148),
    americas-USA-EastStdTime-IndianaMostLocations(149),
    americas-USA-EastStdTime-IndianaCrawfordCounty(150),
    americas-USA-EastStdTime-IndianaStarkeCounty(151),
    americas-USA-EastStdTime-IndianaSwitzerlandCounty(152),
    americas-USA-CentTime(153),
    americas-USA-CentTime-MichiganWisconsinborder(154),
    americas-USA-CentTime-NorthDakotaOliverCounty(155),
    americas-USA-MountTime(156),
    americas-USA-MountTime-SouthIdahoAndEastOregon(157),
    americas-USA-MountTime-Navajo(158),
    americas-USA-MountStdTime-Arizona(159),
    americas-USA-PacificTime(160),
    americas-USA-AlaskaTime(161),
    americas-USA-AlaskaTime-AlaskaPanhandle(162),
    americas-USA-AlaskaTime-AlaskaPanhandleNeck(163),
    americas-USA-AlaskaTime-WestAlaska(164),
    americas-USA-AleutianIslands(165),
    americas-USA-Hawaii(166),
    americas-Uruguay(167),
    americas-Venezuela(168),
    americas-VirginIslands-UK(169),
    americas-VirginIslands-US(170),
    antarctica-McMurdoStationRossIsland(171),
    antarctica-Amundsen-ScottStationSouthPole(172),
    antarctica-PalmerStationAnversIsland(173),
    antarctica-MawsonStationHolmeBay(174),
    antarctica-DavisStationVestfoldHills(175),
    antarctica-CaseyStationBaileyPeninsula(176),
    antarctica-VostokStationSMagneticPole(177),
    antarctica-Dumont-dUrvilleBaseTerreAdelie(178),
    antarctica-SyowaStationEOngulI(179),
    arcticOcean-Svalbard(180),
    arcticOcean-JanMayen(181),
    asia-Afghanistan(182),
    asia-Armenia(183),
    asia-Azerbaijan(184),
    asia-Bahrain(185),
    asia-Bangladesh(186),
    asia-Bhutan(187),
    asia-Brunei(188),
    asia-Cambodia(189),
    asia-China-EastChinaBeijingGuangdongShanghai(190),
    asia-China-Heilongjiang(191),
    asia-China-CentralChinaGansuGuizhouSichuanYunnan(192),
    asia-China-TibetmostofXinjiangUyghur(193),
    asia-China-SouthwestXinjiangUyghur(194),
    asia-Cyprus(195),
    asia-EastTimor(196),
    asia-Georgia(197),
    asia-HongKong(198),
    asia-India(199),
    asia-Indonesia-JavaAndSumatra(200),
    asia-Indonesia-WestCentralBorneo(201),
    asia-Indonesia-ESBorneoCelebesBaliNusaTengaWTimor(202),
    asia-Indonesia-IrianJayaAndMoluccas(203),
    asia-Iran(204),
    asia-Iraq(205),
    asia-Israel(206),
    asia-Japan(207),
    asia-Jordan(208),
    asia-Kazakhstan-MostLocations(209),
    asia-Kazakhstan-QyzylordaKyzylorda(210),
    asia-Kazakhstan-Aqtobe(211),
    asia-Kazakhstan-AtyrauMangghystau(212),
    asia-Kazakhstan-WestKazakhstan(213),
    asia-Korea-North(214),
    asia-Korea-South(215),
    asia-Kuwait(216),
    asia-Kyrgyzstan(217),
    asia-Laos(218),
    asia-Lebanon(219),
    asia-Macau(220),
    asia-Malaysia-PeninsularMalaysia(221),
    asia-Malaysia-SabahSarawak(222),
    asia-Mongolia-MostLocations(223),
    asia-Mongolia-BayanOlgiyGoviAltaiHovdUvsZavkhan(224),
    asia-Mongolia-DornodSukhbaatar(225),
    asia-Myanmar(226),
    asia-Nepal(227),
    asia-Oman(228),
    asia-Pakistan(229),
    asia-Palestine(230),
    asia-Philippines(231),
    asia-Qatar(232),
    asia-Russia-Moscow-01Kaliningrad(233),
    asia-Russia-Moscow00WestRussia(234),
    asia-Russia-Moscow01CaspianSea(235),
    asia-Russia-Moscow02Urals(236),
    asia-Russia-Moscow03WestSiberia(237),
    asia-Russia-Moscow03Novosibirsk(238),
    asia-Russia-Moscow04YeniseiRiver(239),
    asia-Russia-Moscow05LakeBaikal(240),
    asia-Russia-Moscow06LenaRiver(241),
    asia-Russia-Moscow07AmurRiver(242),
    asia-Russia-Moscow07SakhalinIsland(243),
    asia-Russia-Moscow08Magadan(244),
    asia-Russia-Moscow09Kamchatka(245),
    asia-Russia-Moscow10BeringSea(246),
    asia-SaudiArabia(247),
    asia-Singapore(248),
    asia-SriLanka(249),
    asia-Syria(250),
    asia-Taiwan(251),
    asia-Tajikistan(252),
    asia-Thailand(253),
    asia-Turkmenistan(254),
    asia-UnitedArabEmirates(255),
    asia-Uzbekistan-WestUzbekistan(256),
    asia-Uzbekistan-EastUzbekistan(257),
    asia-Vietnam(258),
    asia-Yemen(259),
    atlanticOcean-Bermuda(260),
    atlanticOcean-CapeVerde(261),
    atlanticOcean-FaeroeIslands(262),
    atlanticOcean-FalklandIslands(263),
    atlanticOcean-Iceland(264),
    atlanticOcean-Portugal-Mainland(265),
    atlanticOcean-Portugal-MadeiraIslands(266),
    atlanticOcean-Portugal-Azores(267),
    atlanticOcean-SouthGeorgia-SouthSandwichIslands(268),
    atlanticOcean-Spain-Mainland(269),
    atlanticOcean-Spain-CeutaMelilla(270),
    atlanticOcean-Spain-CanaryIslands(271),
    atlanticOcean-StHelena(272),
    atlanticOcean-Svalbard-JanMayen(273),
    australia-LordHoweIsland(274),
    australia-Tasmania(275),
    australia-Victoria(276),
    australia-NewSouthWales-MostLocations(277),
    australia-NewSouthWales-Yancowinna(278),
    australia-Queensland-MostLocations(279),
    australia-Queensland-HolidayIslands(280),
    australia-SouthAustralia(281),
    australia-NorthernTerritory(282),
    australia-WesternAustralia(283),
    europe-Albania(284),
    europe-Andorra(285),
    europe-Austria(286),
    europe-Belarus(287),
    europe-Belgium(288),
    europe-BosniaHerzegovina(289),
    europe-Britain-UKGreatBritain(290),
    europe-Britain-UKNorthernIreland(291),
    europe-Bulgaria(292),
    europe-Croatia(293),
    europe-CzechRepublic(294),
    europe-Denmark(295),
    europe-Estonia(296),
    europe-Finland(297),
    europe-France(298),
    europe-Germany(299),
    europe-Gibraltar(300),
    europe-Greece(301),
    europe-Hungary(302),
    europe-Ireland(303),
    europe-Italy(304),
    europe-Latvia(305),
    europe-Liechtenstein(306),
    europe-Lithuania(307),
    europe-Luxembourg(308),
    europe-Macedonia(309),
    europe-Malta(310),
    europe-Moldova(311),
    europe-Monaco(312),
    europe-Montenegro(421),
    europe-Netherlands(313),
    europe-Norway(314),
    europe-Poland(315),
    europe-Portugal-Mainland(316),
    europe-Portugal-MadeiraIslands(317),
    europe-Portugal-Azores(318),
    europe-Romania(319),
    europe-Russia-Moscow-01Kaliningrad(320),
    europe-Russia-Moscow00WestRussia(321),
    europe-Russia-Moscow01CaspianSea(322),
    europe-Russia-Moscow02Urals(323),
    europe-Russia-Moscow03WestSiberia(324),
    europe-Russia-Moscow03Novosibirsk(325),
    europe-Russia-Moscow04YeniseiRiver(326),
    europe-Russia-Moscow05LakeBaikal(327),
    europe-Russia-Moscow06LenaRiver(328),
    europe-Russia-Moscow07AmurRiver(329),
    europe-Russia-Moscow07SakhalinIsland(330),
    europe-Russia-Moscow08Magadan(331),
    europe-Russia-Moscow09Kamchatka(332),
    europe-Russia-Moscow10BeringSea(333),
    europe-SanMarino(334),
    europe-Serbia(348),
    europe-Slovakia(335),
    europe-Slovenia(336),
    europe-Spain-Mainland(337),
    europe-Spain-CeutaAndMelilla(338),
    europe-Spain-CanaryIslands(339),
    europe-Sweden(340),
    europe-Switzerland(341),
    europe-Turkey(342),
    europe-Ukraine-MostLocations(343),
    europe-Ukraine-Ruthenia(344),
    europe-Ukraine-Zaporozhye-ELugansk(345),
    europe-Ukraine-CentralCrimea(346),
    europe-VaticanCity(347),
    indianOcean-BritishIndianOceanTerritory(349),
    indianOcean-ChristmasIsland(350),
    indianOcean-CocosOrKeelingIslands(351),
    indianOcean-Comoros(352),
    indianOcean-FrenchSouthernAndAntarcticLands(353),
    indianOcean-Madagascar(354),
    indianOcean-Maldives(355),
    indianOcean-Mauritius(356),
    indianOcean-Mayotte(357),
    indianOcean-Reunion(358),
    indianOcean-Seychelles(359),
    pacificOcean-Chile-MostLocations(360),
    pacificOcean-Chile-EasterIslandSalayGomez(361),
    pacificOcean-CookIslands(362),
    pacificOcean-Ecuador(363),
    pacificOcean-Fiji(364),
    pacificOcean-FrenchPolynesia-SocietyIslands(365),
    pacificOcean-FrenchPolynesia-MarquesasIslands(366),
    pacificOcean-FrenchPolynesia-GambierIslands(367),
    pacificOcean-Guam(368),
    pacificOcean-Kiribati-GilbertIslands(369),
    pacificOcean-Kiribati-PhoenixIslands(370),
    pacificOcean-Kiribati-LineIslands(371),
    pacificOcean-MarshallIslands-MostLocations(372),
    pacificOcean-MarshallIslands-Kwajalein(373),
    pacificOcean-Micronesia-Yap(374),
    pacificOcean-Micronesia-TrukOrChuuk(375),
    pacificOcean-Micronesia-PonapeOrPohnpei(376),
    pacificOcean-Micronesia-Kosrae(377),
    pacificOcean-Nauru(378),
    pacificOcean-NewCaledonia(379),
    pacificOcean-NewZealand-MostLocations(380),
    pacificOcean-NewZealand-ChathamIslands(381),
    pacificOcean-Niue(382),
    pacificOcean-NorfolkIsland(383),
    pacificOcean-NorthernMarianaIslands(384),
    pacificOcean-Palau(385),
    pacificOcean-PapuaNewGuinea(386),
    pacificOcean-Pitcairn(387),
    pacificOcean-SamoaAmerican(388),
    pacificOcean-SamoaWestern(389),
    pacificOcean-SolomonIslands(390),
    pacificOcean-Tokelau(391),
    pacificOcean-Tonga(392),
    pacificOcean-Tuvalu(393),
    pacificOceanUSA-EastTime(394),
    pacificOceanUSA-EastTime-MichiganMostLocations(395),
    pacificOceanUSA-EastTime-KentuckyLouisvilleArea(396),
    pacificOceanUSA-EastTime-KentuckyWayneCounty(397),
    pacificOceanUSA-EastStdTime-IndianaMostLocations(398),
    pacificOceanUSA-EastStdTime-IndianaCrawfordCounty(399),
    pacificOceanUSA-EastStdTime-IndianaStarkeCounty(400),
    pacificOceanUSA-EastStdTime-IndianaSwitzerlandCounty(401),
    pacificOceanUSA-CentTime(402),
    pacificOceanUSA-CentTime-MichiganWisconsinborder(403),
    pacificOceanUSA-CentTime-NorthDakotaOliverCounty(404),
    pacificOceanUSA-MountTime(405),
    pacificOceanUSA-MountTime-SouthIdahoAndEastOregon(406),
    pacificOceanUSA-MountTime-Navajo(407),
    pacificOceanUSA-MountStdTime-Arizona(408),
    pacificOceanUSA-PacificTime(409),
    pacificOceanUSA-AlaskaTime(410),
    pacificOceanUSA-AlaskaTime-AlaskaPanhandle(411),
    pacificOceanUSA-AlaskaTime-AlaskaPanhandleNeck(412),
    pacificOceanUSA-AlaskaTime-WestAlaska(413),
    pacificOceanUSA-AleutianIslands(414),
    pacificOceanUSA-Hawaii(415),
    pacificOcean-USMinorOutlyingIslands-JohnstonAtoll(416),
    pacificOcean-USMinorOutlyingIslands-MidwayIslands(417),
    pacificOcean-USMinorOutlyingIslands-WakeIsland(418),
    pacificOcean-Vanuatu(419),
    pacificOcean-WallisAndFutuna(420)
	}
    MAX-ACCESS read-only
    STATUS  current
    DESCRIPTION
        "The daylight savings location.
         Note: Locations are alphabetically ordered and
         the corresponding code is not reflected in CLI."
    ::= { agSystem 55 }

agNewDaylightSavings   OBJECT-TYPE
    SYNTAX  INTEGER  {
    none(0),
    africa-Algeria(1),
    africa-Angola(2),
    africa-Benin(3),
    africa-Botswana(4),
    africa-Burkina-Faso(5),
    africa-Burundi(6),
    africa-Cameroon(7),
    africa-Central-African-Rep(8),
    africa-Chad(9),
    africa-Congo-WestDemRepCongo(10),
    africa-Congo-EastDemRepCongo(11),
    africa-Congo-Rep(12),
    africa-Cote-dIvoire(13),
    africa-Djibouti(14),
    africa-Egypt(15),
    africa-Equatorial-Guinea(16),
    africa-Eritrea(17),
    africa-Ethiopia(18),
    africa-Gabon(19),
    africa-Gambia(20),
    africa-Ghana(21),
    africa-Guinea(22),
    africa-Guinea-Bissau(23),
    africa-Kenya(24),
    africa-Lesotho(25),
    africa-Liberia(26),
    africa-Libya(27),
    africa-Malawi(28),
    africa-Mali-SouthWestMali(29),
    africa-Mali-NorthEastMali(30),
    africa-Mauritania(31),
    africa-Morocco(32),
    africa-Mozambique(33),
    africa-Namibia(34),
    africa-Niger(35),
    africa-Nigeria(36),
    africa-Rwanda(37),
    africa-SaoTome-And-Principe(38),
    africa-Senegal(39),
    africa-SierraLeone(40),
    africa-Somalia(41),
    africa-SouthAfrica(42),
    africa-Spain-Mainland(43),
    africa-Spain-CeutaMelilla(44),
    africa-Spain-CanaryIslands(45),
    africa-Sudan(46),
    africa-Swaziland(47),
    africa-Tanzania(48),
    africa-Togo(49),
    africa-Tunisia(50),
    africa-Uganda(51),
    africa-Western-Sahara(52),
    africa-Zambia(53),
    africa-Zimbabwe(54),
    americas-Anguilla(55),
    americas-Antigua-Barbuda(56),
    americas-Argentina-EArgentina(57),
    americas-Argentina-MostLocations(58),
    americas-Argentina-Jujuy(59),
    americas-Argentina-Catamarca(60),
    americas-Argentina-Mendoza(61),
    americas-Aruba(62),
    americas-Bahamas(63),
    americas-Barbados(64),
    americas-Belize(65),
    americas-Bolivia(66),
    americas-Brazil-AtlanticIslands(67),
    americas-Brazil-AmapaEPara(68),
    americas-Brazil-NEBrazil(69),
    americas-Brazil-Pernambuco(70),
    americas-Brazil-Tocantins(71),
    americas-Brazil-AlagoasSergipe(72),
    americas-Brazil-SSEBrazil(73),
    americas-Brazil-MatoGrossoDoSul(74),
    americas-Brazil-WParaRondonia(75),
    americas-Brazil-Roraima(76),
    americas-Brazil-EAmazonas(77),
    americas-Brazil-WAmazonas(78),
    americas-Brazil-Acre(79),
    americas-Canada-NewfoundlandIsland(80),
    americas-Canada-AtlanTime-NovaScotia(81),
    americas-Canada-AtlanTime-ELabrador(82),
    americas-Canada-EastTime-OntarioMostlocation(83),
    americas-Canada-EastTime-ThunderBay(84),
    americas-Canada-EastStdTime-PangnirtungNunavut(85),
    americas-Canada-EastStdTime-EastNunavut(86),
    americas-Canada-EastStdTime-CenNunavut(87),
    americas-Canada-CenTime-ManitobaWestOntario(88),
    americas-Canada-CenTime-RainyRiver(89),
    americas-Canada-CenTime-WestNunavut(90),
    americas-Canada-CenStdTime-SaskatchewanMostlocation(91),
    americas-Canada-CenStdTime-SaskatchewanMidwest(92),
    americas-Canada-MountTime-AlbertaEastBritishColumbia(93),
    americas-Canada-MountTime-CentralNorthwestTerritories(94),
    americas-Canada-MountTime-WestNorthwestTerritories(95),
    americas-Canada-MountStdTime-DawsonCrkStJohnBritColumbia(96),
    americas-Canada-PacificTime-WestBritishColumbia(97),
    americas-Canada-PacificTime-SouthYukon(98),
    americas-Canada-PacificTime-NorthYukon(99),
    americas-CaymanIslands(100),
    americas-Chile-MostLocation(101),
    americas-Chile-EasterIsland(102),
    americas-Colombia(103),
    americas-CostaRica(104),
    americas-Cuba(105),
    americas-Dominica(106),
    americas-DominicanRepublic (107),
    americas-Ecuador(108),
    americas-ElSalvado(109),
    americas-FrenchGuiana(110),
    americas-Greenland-MostLocation(111),
    americas-Greenland-EastCoastNorthScoresbysund(112),
    americas-Greenland-ScoresbysundIttoqqortoormiit(113),
    americas-Greenland-ThulePituffik(114),
    americas-Grenada(115),
    americas-Guadeloupe(116),
    americas-Guatemala(117),
    americas-Guyana(118),
    americas-Haiti(119),
    americas-Honduras(120),
    americas-Jamaica(121),
    americas-Martinique(122),
    americas-Mexico-CentTime-Mostlocations(123),
    americas-Mexico-CentTime-QuintanaRoo(124),
    americas-Mexico-CentTime-CampecheYucatan(125),
    americas-Mexico-CentTime-CoahuilaDurNuevoLeonTam(126),
    americas-Mexico-MountTime-SBajaNayaritSinaloa(127),
    americas-Mexico-MountTime-Chihuahua(128),
    americas-Mexico-MountStdTime-Sonora(129),
    americas-Mexico-PacificTime(130),
    americas-Montserrat(131),
    americas-NetherlandsAntilles(132),
    americas-Nicaragua(133),
    americas-Panama(134),
    americas-Paraguay(135),
    americas-Peru(136),
    americas-PuertoRico(137),
    americas-StKittsAndNevis(138),
    americas-StLucia(139),
    americas-StPierreAndMiquelon(140),
    americas-StVincent(141),
    americas-Suriname(142),
    americas-TrinidadAndTobago(143),
    americas-TurksAndCaicosIs(144),
    americas-USA-EastTime(145),
    americas-USA-EastTime-MichiganMostLocation(146),
    americas-USA-EastTime-KentuckyLouisvilleArea(147),
    americas-USA-EastTime-KentuckyWayneCounty(148),
    americas-USA-EastStdTime-IndianaMostLocations(149),
    americas-USA-EastStdTime-IndianaCrawfordCounty(150),
    americas-USA-EastStdTime-IndianaStarkeCounty(151),
    americas-USA-EastStdTime-IndianaSwitzerlandCounty(152),
    americas-USA-CentTime(153),
    americas-USA-CentTime-MichiganWisconsinborder(154),
    americas-USA-CentTime-NorthDakotaOliverCounty(155),
    americas-USA-MountTime(156),
    americas-USA-MountTime-SouthIdahoAndEastOregon(157),
    americas-USA-MountTime-Navajo(158),
    americas-USA-MountStdTime-Arizona(159),
    americas-USA-PacificTime(160),
    americas-USA-AlaskaTime(161),
    americas-USA-AlaskaTime-AlaskaPanhandle(162),
    americas-USA-AlaskaTime-AlaskaPanhandleNeck(163),
    americas-USA-AlaskaTime-WestAlaska(164),
    americas-USA-AleutianIslands(165),
    americas-USA-Hawaii(166),
    americas-Uruguay(167),
    americas-Venezuela(168),
    americas-VirginIslands-UK(169),
    americas-VirginIslands-US(170),
    antarctica-McMurdoStationRossIsland(171),
    antarctica-Amundsen-ScottStationSouthPole(172),
    antarctica-PalmerStationAnversIsland(173),
    antarctica-MawsonStationHolmeBay(174),
    antarctica-DavisStationVestfoldHills(175),
    antarctica-CaseyStationBaileyPeninsula(176),
    antarctica-VostokStationSMagneticPole(177),
    antarctica-Dumont-dUrvilleBaseTerreAdelie(178),
    antarctica-SyowaStationEOngulI(179),
    arcticOcean-Svalbard(180),
    arcticOcean-JanMayen(181),
    asia-Afghanistan(182),
    asia-Armenia(183),
    asia-Azerbaijan(184),
    asia-Bahrain(185),
    asia-Bangladesh(186),
    asia-Bhutan(187),
    asia-Brunei(188),
    asia-Cambodia(189),
    asia-China-EastChinaBeijingGuangdongShanghai(190),
    asia-China-Heilongjiang(191),
    asia-China-CentralChinaGansuGuizhouSichuanYunnan(192),
    asia-China-TibetmostofXinjiangUyghur(193),
    asia-China-SouthwestXinjiangUyghur(194),
    asia-Cyprus(195),
    asia-EastTimor(196),
    asia-Georgia(197),
    asia-HongKong(198),
    asia-India(199),
    asia-Indonesia-JavaAndSumatra(200),
    asia-Indonesia-WestCentralBorneo(201),
    asia-Indonesia-ESBorneoCelebesBaliNusaTengaWTimor(202),
    asia-Indonesia-IrianJayaAndMoluccas(203),
    asia-Iran(204),
    asia-Iraq(205),
    asia-Israel(206),
    asia-Japan(207),
    asia-Jordan(208),
    asia-Kazakhstan-MostLocations(209),
    asia-Kazakhstan-QyzylordaKyzylorda(210),
    asia-Kazakhstan-Aqtobe(211),
    asia-Kazakhstan-AtyrauMangghystau(212),
    asia-Kazakhstan-WestKazakhstan(213),
    asia-Korea-North(214),
    asia-Korea-South(215),
    asia-Kuwait(216),
    asia-Kyrgyzstan(217),
    asia-Laos(218),
    asia-Lebanon(219),
    asia-Macau(220),
    asia-Malaysia-PeninsularMalaysia(221),
    asia-Malaysia-SabahSarawak(222),
    asia-Mongolia-MostLocations(223),
    asia-Mongolia-BayanOlgiyGoviAltaiHovdUvsZavkhan(224),
    asia-Mongolia-DornodSukhbaatar(225),
    asia-Myanmar(226),
    asia-Nepal(227),
    asia-Oman(228),
    asia-Pakistan(229),
    asia-Palestine(230),
    asia-Philippines(231),
    asia-Qatar(232),
    asia-Russia-Moscow-01Kaliningrad(233),
    asia-Russia-Moscow00WestRussia(234),
    asia-Russia-Moscow01CaspianSea(235),
    asia-Russia-Moscow02Urals(236),
    asia-Russia-Moscow03WestSiberia(237),
    asia-Russia-Moscow03Novosibirsk(238),
    asia-Russia-Moscow04YeniseiRiver(239),
    asia-Russia-Moscow05LakeBaikal(240),
    asia-Russia-Moscow06LenaRiver(241),
    asia-Russia-Moscow07AmurRiver(242),
    asia-Russia-Moscow07SakhalinIsland(243),
    asia-Russia-Moscow08Magadan(244),
    asia-Russia-Moscow09Kamchatka(245),
    asia-Russia-Moscow10BeringSea(246),
    asia-SaudiArabia(247),
    asia-Singapore(248),
    asia-SriLanka(249),
    asia-Syria(250),
    asia-Taiwan(251),
    asia-Tajikistan(252),
    asia-Thailand(253),
    asia-Turkmenistan(254),
    asia-UnitedArabEmirates(255),
    asia-Uzbekistan-WestUzbekistan(256),
    asia-Uzbekistan-EastUzbekistan(257),
    asia-Vietnam(258),
    asia-Yemen(259),
    atlanticOcean-Bermuda(260),
    atlanticOcean-CapeVerde(261),
    atlanticOcean-FaeroeIslands(262),
    atlanticOcean-FalklandIslands(263),
    atlanticOcean-Iceland(264),
    atlanticOcean-Portugal-Mainland(265),
    atlanticOcean-Portugal-MadeiraIslands(266),
    atlanticOcean-Portugal-Azores(267),
    atlanticOcean-SouthGeorgia-SouthSandwichIslands(268),
    atlanticOcean-Spain-Mainland(269),
    atlanticOcean-Spain-CeutaMelilla(270),
    atlanticOcean-Spain-CanaryIslands(271),
    atlanticOcean-StHelena(272),
    atlanticOcean-Svalbard-JanMayen(273),
    australia-LordHoweIsland(274),
    australia-Tasmania(275),
    australia-Victoria(276),
    australia-NewSouthWales-MostLocations(277),
    australia-NewSouthWales-Yancowinna(278),
    australia-Queensland-MostLocations(279),
    australia-Queensland-HolidayIslands(280),
    australia-SouthAustralia(281),
    australia-NorthernTerritory(282),
    australia-WesternAustralia(283),
    europe-Albania(284),
    europe-Andorra(285),
    europe-Austria(286),
    europe-Belarus(287),
    europe-Belgium(288),
    europe-BosniaHerzegovina(289),
    europe-Britain-UKGreatBritain(290),
    europe-Britain-UKNorthernIreland(291),
    europe-Bulgaria(292),
    europe-Croatia(293),
    europe-CzechRepublic(294),
    europe-Denmark(295),
    europe-Estonia(296),
    europe-Finland(297),
    europe-France(298),
    europe-Germany(299),
    europe-Gibraltar(300),
    europe-Greece(301),
    europe-Hungary(302),
    europe-Ireland(303),
    europe-Italy(304),
    europe-Latvia(305),
    europe-Liechtenstein(306),
    europe-Lithuania(307),
    europe-Luxembourg(308),
    europe-Macedonia(309),
    europe-Malta(310),
    europe-Moldova(311),
    europe-Monaco(312),
    europe-Montenegro(421),
    europe-Netherlands(313),
    europe-Norway(314),
    europe-Poland(315),
    europe-Portugal-Mainland(316),
    europe-Portugal-MadeiraIslands(317),
    europe-Portugal-Azores(318),
    europe-Romania(319),
    europe-Russia-Moscow-01Kaliningrad(320),
    europe-Russia-Moscow00WestRussia(321),
    europe-Russia-Moscow01CaspianSea(322),
    europe-Russia-Moscow02Urals(323),
    europe-Russia-Moscow03WestSiberia(324),
    europe-Russia-Moscow03Novosibirsk(325),
    europe-Russia-Moscow04YeniseiRiver(326),
    europe-Russia-Moscow05LakeBaikal(327),
    europe-Russia-Moscow06LenaRiver(328),
    europe-Russia-Moscow07AmurRiver(329),
    europe-Russia-Moscow07SakhalinIsland(330),
    europe-Russia-Moscow08Magadan(331),
    europe-Russia-Moscow09Kamchatka(332),
    europe-Russia-Moscow10BeringSea(333),
    europe-SanMarino(334),
    europe-Serbia(348),
    europe-Slovakia(335),
    europe-Slovenia(336),
    europe-Spain-Mainland(337),
    europe-Spain-CeutaAndMelilla(338),
    europe-Spain-CanaryIslands(339),
    europe-Sweden(340),
    europe-Switzerland(341),
    europe-Turkey(342),
    europe-Ukraine-MostLocations(343),
    europe-Ukraine-Ruthenia(344),
    europe-Ukraine-Zaporozhye-ELugansk(345),
    europe-Ukraine-CentralCrimea(346),
    europe-VaticanCity(347),
    indianOcean-BritishIndianOceanTerritory(349),
    indianOcean-ChristmasIsland(350),
    indianOcean-CocosOrKeelingIslands(351),
    indianOcean-Comoros(352),
    indianOcean-FrenchSouthernAndAntarcticLands(353),
    indianOcean-Madagascar(354),
    indianOcean-Maldives(355),
    indianOcean-Mauritius(356),
    indianOcean-Mayotte(357),
    indianOcean-Reunion(358),
    indianOcean-Seychelles(359),
    pacificOcean-Chile-MostLocations(360),
    pacificOcean-Chile-EasterIslandSalayGomez(361),
    pacificOcean-CookIslands(362),
    pacificOcean-Ecuador(363),
    pacificOcean-Fiji(364),
    pacificOcean-FrenchPolynesia-SocietyIslands(365),
    pacificOcean-FrenchPolynesia-MarquesasIslands(366),
    pacificOcean-FrenchPolynesia-GambierIslands(367),
    pacificOcean-Guam(368),
    pacificOcean-Kiribati-GilbertIslands(369),
    pacificOcean-Kiribati-PhoenixIslands(370),
    pacificOcean-Kiribati-LineIslands(371),
    pacificOcean-MarshallIslands-MostLocations(372),
    pacificOcean-MarshallIslands-Kwajalein(373),
    pacificOcean-Micronesia-Yap(374),
    pacificOcean-Micronesia-TrukOrChuuk(375),
    pacificOcean-Micronesia-PonapeOrPohnpei(376),
    pacificOcean-Micronesia-Kosrae(377),
    pacificOcean-Nauru(378),
    pacificOcean-NewCaledonia(379),
    pacificOcean-NewZealand-MostLocations(380),
    pacificOcean-NewZealand-ChathamIslands(381),
    pacificOcean-Niue(382),
    pacificOcean-NorfolkIsland(383),
    pacificOcean-NorthernMarianaIslands(384),
    pacificOcean-Palau(385),
    pacificOcean-PapuaNewGuinea(386),
    pacificOcean-Pitcairn(387),
    pacificOcean-SamoaAmerican(388),
    pacificOcean-SamoaWestern(389),
    pacificOcean-SolomonIslands(390),
    pacificOcean-Tokelau(391),
    pacificOcean-Tonga(392),
    pacificOcean-Tuvalu(393),
    pacificOceanUSA-EastTime(394),
    pacificOceanUSA-EastTime-MichiganMostLocations(395),
    pacificOceanUSA-EastTime-KentuckyLouisvilleArea(396),
    pacificOceanUSA-EastTime-KentuckyWayneCounty(397),
    pacificOceanUSA-EastStdTime-IndianaMostLocations(398),
    pacificOceanUSA-EastStdTime-IndianaCrawfordCounty(399),
    pacificOceanUSA-EastStdTime-IndianaStarkeCounty(400),
    pacificOceanUSA-EastStdTime-IndianaSwitzerlandCounty(401),
    pacificOceanUSA-CentTime(402),
    pacificOceanUSA-CentTime-MichiganWisconsinborder(403),
    pacificOceanUSA-CentTime-NorthDakotaOliverCounty(404),
    pacificOceanUSA-MountTime(405),
    pacificOceanUSA-MountTime-SouthIdahoAndEastOregon(406),
    pacificOceanUSA-MountTime-Navajo(407),
    pacificOceanUSA-MountStdTime-Arizona(408),
    pacificOceanUSA-PacificTime(409),
    pacificOceanUSA-AlaskaTime(410),
    pacificOceanUSA-AlaskaTime-AlaskaPanhandle(411),
    pacificOceanUSA-AlaskaTime-AlaskaPanhandleNeck(412),
    pacificOceanUSA-AlaskaTime-WestAlaska(413),
    pacificOceanUSA-AleutianIslands(414),
    pacificOceanUSA-Hawaii(415),
    pacificOcean-USMinorOutlyingIslands-JohnstonAtoll(416),
    pacificOcean-USMinorOutlyingIslands-MidwayIslands(417),
    pacificOcean-USMinorOutlyingIslands-WakeIsland(418),
    pacificOcean-Vanuatu(419),
    pacificOceanWallisAndFutuna(420)
	}
    MAX-ACCESS read-write
    STATUS  current
    DESCRIPTION
        "The daylight savings location."
    ::= { agSystem 56 }


agCurCfgIdleCLITimeout OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Set idle CLI sessions timeout."
    ::= { agSystem 57 }

agNewCfgIdleCLITimeout OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Set idle CLI sessions timeout."
    ::= { agSystem 58 }



-- Auto-Discovery topology table info

agCurCfgHttpsServerAccess OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(0)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Current HTTPS server access state."
    ::= { agSystem 62 }

agNewCfgHttpsServerAccess OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(0)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable/disable HTTPS server access."
    ::= { agSystem 63 }

agCurBootNxtCliMode OBJECT-TYPE
    SYNTAX  INTEGER {
        ibmnos-cli(1),
        iscli(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Current boot mode."
    ::= { agSystem 64 }

agNewBootNxtCliMode OBJECT-TYPE
    SYNTAX  INTEGER {
        ibmnos-cli(1),
        iscli(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Next cli boot mode."
    ::= { agSystem 65 }

agCurBootNxtCliModePrompt OBJECT-TYPE
    SYNTAX  INTEGER {
        disable(1),
        enable(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Current status of selectable CLI mode prompt."
    ::= { agSystem 76 }

agNewBootNxtCliModePrompt OBJECT-TYPE
    SYNTAX  INTEGER {
        disable(1),
        enable(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Next status of selectable CLI mode prompt."
    ::= { agSystem 77 }

agCurHttpAcces OBJECT-TYPE
   SYNTAX  INTEGER {
        enable(1),
        disable(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Current HTTP server access state."
    ::= { agSystem 66 }

agNewHttpAcces OBJECT-TYPE
   SYNTAX  INTEGER {
        enable(1),
        disable(2)
        }
    MAX-ACCESS read-write
    STATUS  current
    DESCRIPTION
        "New HTTP server access state."
    ::= { agSystem 67 }



agCurCfgReminders OBJECT-TYPE
    SYNTAX  INTEGER {
        enable(1),
        disable(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Current status of reminders feature."
    ::= { agSystem 70 }

agNewCfgReminders OBJECT-TYPE
    SYNTAX  INTEGER {
        enable(1),
        disable(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable or disable reminders feature."
    ::= { agSystem 71 }

agCurCfgHprompt OBJECT-TYPE
    SYNTAX  INTEGER {
        enable(1),
        disable(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Current status of hprompt."
    ::= { agSystem 72 }

agNewCfgHprompt OBJECT-TYPE
    SYNTAX  INTEGER {
        enable(1),
        disable(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "New status of hprompt."
    ::= { agSystem 73 }

agCurCfgUserBBI OBJECT-TYPE
    SYNTAX  INTEGER {
        enable(1),
        disable(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Current status of user configuration from BBI."
    ::= { agSystem 74 }

agNewCfgUserBBI OBJECT-TYPE
    SYNTAX  INTEGER {
        enable(1),
        disable(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "New status of user configuration from BBI."
    ::= { agSystem 75 }





agCurCfgSysCustomDstState OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The current status of Custom DST"
    ::= { agSystem 98 }
agNewCfgSysCustomDstState OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable/disable Custom DST"
    ::= { agSystem 99 }
agCurCfgSysCustomDstStart OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..8))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        " The current Custom DST start rule"
    ::= { agSystem 100 }
agNewCfgSysCustomDstStart OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..8))
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Set Custom DST start rule"
    ::= { agSystem 101 }
agCurCfgSysCustomDstEnd OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..8))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The current Custom DST end rule"
    ::= { agSystem 102}
agNewCfgSysCustomDstEnd OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..8))
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Set Custom DST end rule"
    ::= { agSystem 103 }

agHavePanicDump OBJECT-TYPE
    SYNTAX  INTEGER {
        havePanic(1),
        noHavePanic(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The presence of a panic dump in the flash memory."
    ::= { agSystem 104 }


agCurCfgResetControl OBJECT-TYPE
    SYNTAX  INTEGER {
        enable(1),
        disable(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Current reset control state."
    ::= { agSystem 111 }

agNewCfgResetControl OBJECT-TYPE
    SYNTAX  INTEGER {
        enable(1),
        disable(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable/disable reset control after panic."
    ::= { agSystem 112 }

agCurCfgSysDlight OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Current daylight savings time status."
    ::= { agSystem 113 }

agNewCfgSysDlight OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable/disable daylight savings time."
    ::= { agSystem 114 }

agCurCfgErrDisableRecovery OBJECT-TYPE
    SYNTAX      INTEGER {
                    enable(1),
                    disable(2)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object indicates whether the system will automatically
         re-enable an error-disabled port after the time interval
         indicated by agCurCfgErrDisableTimeout has elapsed. A port
         is in error-disabled state when it has been operationally
         disabled due to abnormal conditions detected on the port.

         An error-disabled port will only be automatically re-enabled
         by the system if and only if this object and the port's
         agPortCurCfgErrDisableRecovery object both have a value of
         'enable(1)'."
    DEFVAL      { disable }
    ::= { agSystem 115 }

agNewCfgErrDisableRecovery OBJECT-TYPE
    SYNTAX      INTEGER {
                    enable(1),
                    disable(2)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object specifies whether the system should automatically
         re-enable an error-disabled port.  Use this object to change
         the global setting of the error-disable recovery action."
    DEFVAL      { disable }
    ::= { agSystem 116 }

agCurCfgErrDisableTimeout OBJECT-TYPE
    SYNTAX      INTEGER (30 .. 86400)
    UNITS       "seconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object indicates the time, in seconds, that the system
         will wait before it automatically re-enables any port that
         is in error-disabled state."
    DEFVAL      { 300 }
    ::= { agSystem 117 }

agNewCfgErrDisableTimeout OBJECT-TYPE
    SYNTAX      INTEGER (30 .. 86400)
    UNITS       "seconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object specifies the time, in seconds, that the system
         should wait before it automatically re-enables a port that
         is in error-disabled state.  Use this object to change the
         global error-disable timeout value."
    DEFVAL      { 300 }
    ::= { agSystem 118 }

agCurCfgTelnetAccess OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(0)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Current telnet access state."
    ::= { agSystem 119 }

agNewCfgTelnetAccess OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(0)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable/disable telnet access."
    ::= { agSystem 120 }

agCurCfgDcbx OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(0)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Current DCBX state."
    ::= { agSystem 121 }

agNewCfgDcbx OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(0)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable/disable DCBX feature."
    ::= { agSystem 122 }

agCurCfgDhcpMgta OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable the use of DHCP mgta, as configured
	in the current configuration block."
    ::= { agSystem 123 }

agNewCfgDhcpMgta OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable or disable the use of DHCP mgta, in the new configuration block."
    ::= { agSystem 124 }
agCurCfgDhcpMgtb OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable the use of DHCP mgtb, as configured in the
         current configuration block."
    ::= { agSystem 125 }

agNewCfgDhcpMgtb OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable or disable the use of DHCP mgtb, in the new configuration block."
    ::= { agSystem 126 }

serverPortsCurCfgPorts OBJECT-TYPE
    SYNTAX  OCTET STRING
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The current configured server port list. The ports are presented in bitmap format.
         in receiving order:

             OCTET 1  OCTET 2  .....
             xxxxxxxx xxxxxxxx .....
             ||    || |_ port 8
             ||    ||
             ||    ||___ port 7
             ||    |____ port 6
             ||      .    .   .
             ||_________ port 1
             |__________ reserved

         where x : 1 - The represented port belongs to the server ports list
                   0 - The represented port does not belong to the server ports list"
    ::= { agSystem 127 }

serverPortsNewCfgPorts OBJECT-TYPE
    SYNTAX  OCTET STRING
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "New configuration server port list. The ports are presented in bitmap format.
         in receiving order:

             OCTET 1  OCTET 2  .....
             xxxxxxxx xxxxxxxx .....
             ||    || |_ port 8
             ||    ||
             ||    ||___ port 7
             ||    |____ port 6
             ||      .    .   .
             ||_________ port 1
             |__________ reserved

         where x : 1 - The represented port belongs to the server ports list
                   0 - The represented port does not belong to the server ports list"
    ::= { agSystem 128 }

serverPortsNewCfgAddPort OBJECT-TYPE
    SYNTAX  PortNumber
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "The port to be added to the server ports list.  A '0' value is
         returned when read."
    ::= {agSystem 129 }

serverPortsNewCfgRemovePort OBJECT-TYPE
    SYNTAX  PortNumber
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "The port to be removed from the server ports list.  A '0' value is
         returned when read."
    ::= { agSystem 130 }

agCurBootProfile OBJECT-TYPE
    SYNTAX  INTEGER {
        default(0)
        ,routing(1)
        ,aggregate(2)
        ,hft(3)
        ,ipv6(6)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Profile that will be used by the switch after reset"
    ::= { agSystem 131 }

agNewBootProfile OBJECT-TYPE
    SYNTAX  INTEGER {
        default(0)
        ,routing(1)
        ,aggregate(2)
        ,hft(3)
        ,ipv6(6)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Configure the profile that will be used by the switch after reset"
    ::= { agSystem 132 }

agNetboot OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Ena/dis loading of config over n/w during bootup"
    ::= { agSystem 133 }

agNetbootTftpAddr OBJECT-TYPE
    SYNTAX IpAddress
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Tftp server address from where config file needs to be downloaded"
    ::= { agSystem 134 }

agNetbootCfgFile OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..31))
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Config file location on tftp server"
    ::= { agSystem 135 }





agCurRFC4741NetconfAccess OBJECT-TYPE
   SYNTAX  INTEGER {
        enable(1),
        disable(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Current NETCONF server access state."
    ::= { agSystem 142 }

agNewRFC4741NetconfAccess  OBJECT-TYPE
   SYNTAX  INTEGER {
        enable(1),
        disable(2)
        }
    MAX-ACCESS read-write
    STATUS  current
    DESCRIPTION
        "Enable/disable NETCONF server access state."
    ::= { agSystem 143 }

agCurRFC4741NetconfSessionTimeout OBJECT-TYPE
    SYNTAX  INTEGER (60..3600)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Once NETCONF session setup, NETCONF server will allocate resource
        for this session.
        agCurRFC4741NetconfSessionTimeout indicates the number of seconds before
        the resources are freed if there is no operation on this session"
    ::= { agSystem 144 }

agNewRFC4741NetconfSessionTimeout OBJECT-TYPE
    SYNTAX  INTEGER (60..3600)
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Once NETCONF session setup, NETCONF server will allocate resource
        for this session.
        agNewRFC4741NetconfSessionTimeout specifies the number of seconds before
        the resources are freed if there is no operation on this session"
    ::= { agSystem 145 }

agCurRFC4741NetconfSshAccess OBJECT-TYPE
   SYNTAX  INTEGER {
        enable(1),
        disable(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Current NETCONF server over SSH access state."
    ::= { agSystem 146 }

agNewRFC4741NetconfSshAccess OBJECT-TYPE
   SYNTAX  INTEGER {
        enable(1),
        disable(2)
        }
    MAX-ACCESS read-write
    STATUS  current
    DESCRIPTION
        "Enable/disable NETCONF server over SSH access state."
    ::= { agSystem 147 }

agCurRFC4741NetconfSshPort OBJECT-TYPE
    SYNTAX  INTEGER (1..65535)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The TCP port number that the NETCONF server over SSH is listening to
         in the current configuration block."
    ::= { agSystem 148 }

agNewRFC4741NetconfSshPort OBJECT-TYPE
    SYNTAX  INTEGER (1..65535)
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The TCP port number that the NETCONF server over SSH is listening to
         in the new configuration block."
    ::= { agSystem 149}

agCurCfgCpuRateLimitArp OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Current CPU rate limit for ARP requests and responses."
    ::= { agSystem 150 }

agNewCfgCpuRateLimitArp OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "New CPU rate limit for ARP requests and responses."
    ::= { agSystem 151 }

agCurCfgCpuRateLimitBpdu OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Current CPU rate limit for BPDUs (STP, LACP)."
    ::= { agSystem 152 }

agNewCfgCpuRateLimitBpdu OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "New CPU rate limit for BPDUs (STP, LACP)."
    ::= { agSystem 153 }

agCurCfgCpuRateLimitCntl OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Current CPU rate limit for control packets (IGMP, DHCP)."
    ::= { agSystem 154 }

agNewCfgCpuRateLimitCntl OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "New CPU rate limit for control packets (IGMP, DHCP)."
    ::= { agSystem 155 }

agCurCfgCpuRateLimitOther OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Current CPU rate limit for other packets (Data, ICMP)."
    ::= { agSystem 156 }

agNewCfgCpuRateLimitOther OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "New CPU rate limit for other packets (Data, ICMP)."
    ::= { agSystem 157 }


agCurCfgLFDStatus OBJECT-TYPE
    SYNTAX      INTEGER {
                    enable(1),
                    disable(2)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object indicates whether the system will put any port
         in an error-disabled state due to excessive link flaps.

         A port will be put in an error-disabled state due to 
         excessive link flaps if this object and the port's
         agPortCurCfgLFDStatus object both have a value of 'enable'.
         A port has an excessive number of link flaps if the number
         of link flaps detected during a time period in seconds
         indicated by agCurCfgLFDTime exceeds the maximum number of
         allowed flaps indicated by agCurCfgLFDFlaps."
    DEFVAL      { disable }
    ::= { agSystem 158 }

agNewCfgLFDStatus OBJECT-TYPE
    SYNTAX      INTEGER {
                    enable(1),
                    disable(2)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object indicates whether the system should put any port
         in an error-disabled state due to excessive link flaps.
         Use this object to change the global setting of the Link
         Flap Dampening error-disable action."
    DEFVAL      { disable }
    ::= { agSystem 159 }

agCurCfgLFDFlaps OBJECT-TYPE
    SYNTAX      INTEGER (1 .. 100)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object indicates the maximum number of flaps allowed
         in a time period set by agCurCfgLFDTime."
    DEFVAL      { 5 }
    ::= { agSystem 160 }

agNewCfgLFDFlaps OBJECT-TYPE
    SYNTAX      INTEGER (1 .. 100)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object specifies the maximum number of flaps that should
         be allowed in a time period.  Use this object to change the
         global maximum number of flaps allowed in a time period."
    DEFVAL      { 5 }
    ::= { agSystem 161 }

agCurCfgLFDTime OBJECT-TYPE
    SYNTAX      INTEGER (5 .. 500)
    UNITS       "seconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object indicates the length of time period in seconds
         during which link flaps are counted."
    DEFVAL      { 30 }
    ::= { agSystem 162 }

agNewCfgLFDTime OBJECT-TYPE
    SYNTAX      INTEGER (5 .. 500)
    UNITS       "seconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object specifies the length of time period in seconds
         that should be used to count link flaps."
    DEFVAL      { 30 }
    ::= { agSystem 163 }


agCurCfgTrapSrcLoopIf OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The index of the loopback interface that should be used
         for the source IP of the SNMP trap; 0 means that
         no loopback interface is used as the source of the SNMP trap."
    ::= { agSystem 164 }

agNewCfgTrapSrcLoopIf OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The index of the loopback interface that should be used
         for the source IP of the SNMP trap; 0 means that
         no loopback interface is used as the source of the SNMP trap."
    ::= { agSystem 165 }


agCfgMtm OBJECT-TYPE
    SYNTAX      INTEGER {
                    mtmValue1(1),
                    mtmValue2(2),
                    mtmValue3(3),
                    mtmValue4(4),
                    mtmValue5(5)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object specifies the new value for MTM. 
         The available MTM values are:
         1455-24E (1)
         7309-BF7 (2)
         7309-BR6 (3)
         7309-HC7 (4)
         7309-HC6 (5)"
    ::= { agSystem 166 }

agCurCfgDefipData OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable the use of default IP address on data interface,
          as configured in the current configuration block."
    ::= { agSystem 167 }

agNewCfgDefipData OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable or disable the use of default IP address on data interface,
          in the new configuration block."
    ::= { agSystem 168 }

agCurCfgDefipMgta OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable the use of default IP address on mgta interface,
          as configured in the current configuration block."
    ::= { agSystem 169 }

agNewCfgDefipMgta OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable or disable the use of default IP address on mgta interface,
          in the new configuration block."
    ::= { agSystem 170 }
agCurCfgDefipMgtb OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable the use of default IP address on mgtb interface,
          as configured in the current configuration block."
    ::= { agSystem 171 }
agNewCfgDefipMgtb OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable or disable the use of default IP address on mgtb interface,
          in the new configuration block."
    ::= { agSystem 172 }


-- Syslog Configuration
agCurCfgSyslogHost OBJECT-TYPE
    SYNTAX  DisplayString
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The syslog host IP address in the current configuration block."
    ::= { agSyslog 1 }

agNewCfgSyslogHost OBJECT-TYPE
    SYNTAX  DisplayString
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The syslog host IP address in the new configuration block."
    ::= { agSyslog 2 }

agCurCfgSyslog2Host OBJECT-TYPE
    SYNTAX  DisplayString
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The second syslog host IP address in the current configuration block."
    ::= { agSyslog 3 }

agNewCfgSyslog2Host OBJECT-TYPE
    SYNTAX  DisplayString
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The second syslog host IP address in the new configuration block."
    ::= { agSyslog 4 }

agCurCfgSyslogFac   OBJECT-TYPE
    SYNTAX  INTEGER  {
	local0(1),
	local1(2),
	local2(3),
	local3(4),
	local4(5),
	local5(6),
	local6(7),
	local7(8)
	}
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The facility level of syslog host in the current configuration block."
    ::= { agSyslog 5 }

agNewCfgSyslogFac   OBJECT-TYPE
    SYNTAX  INTEGER  {
	local0(1),
	local1(2),
	local2(3),
	local3(4),
	local4(5),
	local5(6),
        local6(7),
	local7(8)
	}
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The facility level of syslog host in the new configuration block."
    ::= { agSyslog 6 }

agCurCfgSyslog2Fac   OBJECT-TYPE
    SYNTAX  INTEGER  {
	local0(1),
	local1(2),
	local2(3),
	local3(4),
	local4(5),
	local5(6),
	local6(7),
	local7(8)
	}
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The facility level of second syslog host in the current
         configuration block."
    ::= { agSyslog 7 }

agNewCfgSyslog2Fac   OBJECT-TYPE
    SYNTAX  INTEGER  {
	local0(1),
	local1(2),
	local2(3),
	local3(4),
        local4(5),
	local5(6),
        local6(7),
	local7(8)
	}
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The facility level of second syslog host in the new
         configuration block."
    ::= { agSyslog 8 }

agCurCfgSyslogSev   OBJECT-TYPE
    SYNTAX  INTEGER  {
        emerg0(1),
	alert1(2),
	crit2(3),
	err3(4),
	warning4(5),
	notice5(6),
	info6(7),
	debug7(8)
	}
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The severity of syslog host in the current configuration block."
    ::= { agSyslog 13 }

agNewCfgSyslogSev   OBJECT-TYPE
    SYNTAX  INTEGER  {
        emerg0(1),
	alert1(2),
	crit2(3),
	err3(4),
	warning4(5),
	notice5(6),
	info6(7),
	debug7(8)
	}
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The severity of syslog host in the new configuration block."
    ::= { agSyslog 14 }

agCurCfgSyslog2Sev   OBJECT-TYPE
    SYNTAX  INTEGER  {
        emerg0(1),
	alert1(2),
	crit2(3),
	err3(4),
	warning4(5),
	notice5(6),
	info6(7),
	debug7(8)
	}
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The severity of syslog2 host in the current configuration block."
    ::= { agSyslog 15 }

agNewCfgSyslog2Sev   OBJECT-TYPE
    SYNTAX  INTEGER  {
        emerg0(1),
	alert1(2),
	crit2(3),
	err3(4),
	warning4(5),
	notice5(6),
	info6(7),
	debug7(8)
	}
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The severity of syslogs host in the new configuration block."
    ::= { agSyslog 16 }

agCurCfgSyslogConsoleSev OBJECT-TYPE
    SYNTAX  INTEGER {
        emerg0(1),
        alert1(2),
        crit2(3),
        err3(4),
        warning4(5),
        notice5(6),
        info6(7),
        debug7(8)
    }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The severity of syslogs console in the current configuration block."
    ::= { agSyslog 23 }
    
agNewCfgSyslogConsoleSev   OBJECT-TYPE
    SYNTAX  INTEGER  {
        emerg0(1),
        alert1(2),
        crit2(3),
        err3(4),
        warning4(5),
        notice5(6),
        info6(7),
        debug7(8)
	}
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The severity of syslogs console in the new configuration block."
    ::= { agSyslog 24 }

agCurCfgSyslogFlashSev OBJECT-TYPE
    SYNTAX  INTEGER {
        emerg0(1),
        alert1(2),
        crit2(3),
        err3(4),
        warning4(5),
        notice5(6),
        info6(7),
        debug7(8)
    }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The severity of syslogs flash in the current configuration block."
    ::= { agSyslog 25 }
    
agNewCfgSyslogFlashSev   OBJECT-TYPE
    SYNTAX  INTEGER  {
        emerg0(1),
        alert1(2),
        crit2(3),
        err3(4),
        warning4(5),
        notice5(6),
        info6(7),
        debug7(8)
	}
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The severity of syslogs flash in the new configuration block."
    ::= { agSyslog 26 }

agClrSyslogMsgs OBJECT-TYPE
    SYNTAX  INTEGER {
        other(1),
        reset(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Clears all current Syslog messages."
    ::= { agSyslog 9 }

agSyslogMsgTableMaxSize OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The maximum number of rows in the syslog message table."
    ::= { agSyslog 10 }

agCurCfgSyslogHostPort OBJECT-TYPE
    SYNTAX  INTEGER {
        data(1),
        mgta(2),
        mgtb(3)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Choose the port that the primary Syslog server is connected to."
    ::= { agSyslog 17 }

agNewCfgSyslogHostPort OBJECT-TYPE
    SYNTAX  INTEGER {
        data(1),
        mgta(2),
        mgtb(3)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Choose the port that the primary Syslog server is connected to."
    ::= { agSyslog 18 }

agCurCfgSyslog2HostPort OBJECT-TYPE
    SYNTAX  INTEGER {
        data(1),
        mgta(2),
        mgtb(3)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Choose the port that the secondary Syslog server is connected to."
    ::= { agSyslog 19 }

agNewCfgSyslog2HostPort OBJECT-TYPE
    SYNTAX  INTEGER {
        data(1),
        mgta(2),
        mgtb(3)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Choose the port that the secondary Syslog server is connected to."
    ::= { agSyslog 20 }

agCurCfgSyslogSrcLoopIf OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The index of the loopback interface that should be used
         for the source IP of the syslog message; 0 means that
         no loopback interface is used as the source of the syslog message."
    ::= { agSyslog 21 }

agNewCfgSyslogSrcLoopIf OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The index of the loopback interface that should be used 
         for the source IP of the syslog message; 0 means that
         no loopback interface is used as the source of the syslog message."
    ::= { agSyslog 22 }

agSyslogMsgTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF AgSyslogMsgTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table of syslog messages."
    ::= { agSyslog 11 }

agSyslogMsgTableEntry OBJECT-TYPE
    SYNTAX  AgSyslogMsgTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A syslog message stored on the switch."
    INDEX   { agSyslogMsgIndex }
    ::= { agSyslogMsgTable 1 }

AgSyslogMsgTableEntry ::= SEQUENCE {
    agSyslogMsgIndex          Integer32,
    agSyslogMessage           DisplayString
    }

agSyslogMsgIndex OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The syslog message table index."
    ::= { agSyslogMsgTableEntry 1 }

agSyslogMessage OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..128))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The syslog message."
    ::= { agSyslogMsgTableEntry 2 }

agLog OBJECT IDENTIFIER ::= { agSyslog 12 }

agNewCfgSyslogTrapConsole OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable or disable console syslog and SNMP trap in the
         new configuration block."
    ::= { agLog 1 }

agCurCfgSyslogTrapConsole OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable console syslog and SNMP trap, as configured
         in the current configuration block."
    ::= { agLog 2 }

agNewCfgSyslogTrapSystem OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable or disable system level syslog and SNMP trap in the
         new configuration block."
    ::= { agLog 3 }

agCurCfgSyslogTrapSystem OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable system level syslog and SNMP trap, as configured
         in the current configuration block."
    ::= { agLog 4 }

agNewCfgSyslogTrapMgmt OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable or disable management(flash, config, login) syslog and SNMP
         trap in the new configuration block."
    ::= { agLog 5 }

agCurCfgSyslogTrapMgmt OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable management(flash, config, login) syslog and SNMP
         trap, as configured in the current configuration block."
    ::= { agLog 6 }

agNewCfgSyslogTrapCli OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable or disable CLI generated error syslog and SNMP trap in the
	     new configuration block."
    ::= { agLog 7 }

agCurCfgSyslogTrapCli OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable CLI generated error syslog and SNMP trap, as
         configured in the current configuration block."
    ::= { agLog 8 }

agNewCfgSyslogTrapStg OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable or disable spanning tree syslog and SNMP trap in the
         new configuration block."
    ::= { agLog 9 }

agCurCfgSyslogTrapStg OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable spanning tree syslog and SNMP trap, as
         configured in the current configuration block."
    ::= { agLog 10 }

agNewCfgSyslogTrapVlan OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable or disable VLAN syslog and SNMP trap in the new
         configuration block."
    ::= { agLog 11 }

agCurCfgSyslogTrapVlan OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable VLAN syslog and SNMP trap, as configured
         in the current configuration block."
    ::= { agLog 12 }



agNewCfgSyslogTrapSsh OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable or disable SSH, RADIUS syslog and SNMP trap in the new
         configuration block."
    ::= { agLog 19 }

agCurCfgSyslogTrapSsh OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable SSH, RADIUS syslog and SNMP trap, as configured
         in the current configuration block."
    ::= { agLog 20 }

agNewCfgSyslogTrapVrrp OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable or disable VRRP syslog and SNMP trap in the new
         configuration block."
    ::= { agLog 21 }

agCurCfgSyslogTrapVrrp OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable VRRP syslog and SNMP trap, as configured
         in the current configuration block."
    ::= { agLog 22 }

agNewCfgSyslogTrapBgp OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable or disable BGP syslog and SNMP trap in the new
         configuration block."
    ::= { agLog 23 }

agCurCfgSyslogTrapBgp OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable BGP syslog and SNMP trap, as configured
         in the current configuration block."
    ::= { agLog 24 }

agNewCfgSyslogTrapNtp OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable or disable NTP syslog and SNMP trap in the new
         configuration block."
    ::= { agLog 25 }

agCurCfgSyslogTrapNtp OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable NTP syslog and SNMP trap, as configured
         in the current configuration block."
    ::= { agLog 26 }

agNewCfgSyslogTrapIp OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable or disable IP related syslog and SNMP trap in the
         new configuration block."
    ::= { agLog 31 }

agCurCfgSyslogTrapIp OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable IP related syslog and SNMP trap, as configured
         in the current configuration block."
    ::= { agLog 32 }

agNewCfgSyslogTrapWeb OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable or disable WEBUI related syslog and SNMP trap in the
         new configuration block."
    ::= { agLog 35 }

agCurCfgSyslogTrapWeb OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable WEBUI related syslog and SNMP trap, as configured
         in the current configuration block."
    ::= { agLog 36 }



agNewCfgSyslogTrapOspf OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable or disable OSPF related syslog and SNMP trap
         in the new configuration block."
    ::= { agLog 41 }

agCurCfgSyslogTrapOspf OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable OSPF related syslog and SNMP trap,
         as configured in the current configuration block."
    ::= { agLog 42 }


agNewCfgSyslogTrapRmon OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable or disable RMON related syslog and SNMP trap
         in the new configuration block."
    ::= { agLog 45 }

agCurCfgSyslogTrapRmon OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable RMON related syslog and SNMP trap,
         as configured in the current configuration block."
    ::= { agLog 46 }




agNewCfgSyslogTrapCfg OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable or disable CFG related syslog and SNMP trap in the
         new configuration block."
    ::= { agLog 53 }

agCurCfgSyslogTrapCfg OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable CFG related syslog and SNMP trap,
         as configured in the current configuration block."
    ::= { agLog 54 }

agNewCfgSyslogTrapServer OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable or disable Server related syslog and SNMP trap in the
         new configuration block."
    ::= { agLog 55 }

agCurCfgSyslogTrapServer OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable Server related syslog and SNMP trap,
         as configured in the current configuration block."
    ::= { agLog 56 }

agNewCfgSyslogTrapDifftrak OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable or disable Difftrak related syslog and SNMP trap in the
         new configuration block."
    ::= { agLog 57 }

agCurCfgSyslogTrapDifftrak OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable Difftrak related syslog and SNMP trap,
         as configured in the current configuration block."
    ::= { agLog 58 }


agNewCfgSyslogTrapHotlinks             OBJECT-TYPE
    SYNTAX      INTEGER {
                    enabled(1),
                    disabled(2)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Enable or disable Hot Links related syslog and SNMP trap in the
         new configuration block."
    ::= { agLog 61 }

agCurCfgSyslogTrapHotlinks             OBJECT-TYPE
    SYNTAX      INTEGER {
                    enabled(1),
                    disabled(2)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Enable or disable Hot Links related syslog and SNMP trap,
         as configured in the current configuration block."
    ::= { agLog 62 }

agNewCfgSyslogTrapLldp OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable or disable LLDP related syslog and SNMP trap in the
         new configuration block."
    ::= { agLog 63 }

agCurCfgSyslogTrapLldp OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable LLDP related syslog and SNMP trap,
         as configured in the current configuration block."
    ::= { agLog 64 }

agNewCfgSyslogTrapAll OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable or disable all syslog and SNMP traps in the
         new configuration block."
    ::= { agLog 65 }

agCurCfgSyslogTrapAll OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable all syslog and SNMP traps, as configured
         in the current configuration block."
    ::= { agLog 66 }
agNewCfgSyslogTrapIpv6 OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable or disable IPv6 related syslog and SNMP trap in the
         new configuration block."
    ::= { agLog 67 }

agCurCfgSyslogTrapIpv6 OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable IPv6 related syslog and SNMP trap,
         as configured in the current configuration block."
    ::= { agLog 68 }

agNewCfgSyslogTrapFailover OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable or disable failover related syslog and SNMP trap in the
         new configuration block."
    ::= { agLog 73 }

agCurCfgSyslogTrapFailover OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable failover related syslog and SNMP trap,
         as configured in the current configuration block."
    ::= { agLog 74 }

agNewCfgSyslogTrapLacp  OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable or disable LACP syslog and SNMP trap in the
         new configuration block."
    ::= { agLog 77 }

agCurCfgSyslogTrapLacp  OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable LACP syslog and SNMP trap, as configured
         in the current configuration block."
    ::= { agLog 78 }

agNewCfgSyslogTrapLink OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable or disable all syslog and SNMP traps, in link
         up/down."
    ::= { agLog 79 }

agCurCfgSyslogTrapLink OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable all syslog and SNMP traps, as currently
         configured in link up/down."
    ::= { agLog 80 }

agNewCfgSyslogTrapOspfv3 OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable or disable OSPFv3 related syslog and SNMP trap
         in the new configuration block."
    ::= { agLog 81 }

agCurCfgSyslogTrapOspfv3 OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable OSPFv3 related syslog and SNMP trap,
         as configured in the current configuration block."
    ::= { agLog 82 }

agNewCfgSyslogTrapDcbx OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable or disable all DCBX-related syslog and SNMP traps."
    ::= { agLog 85 }

agCurCfgSyslogTrapDcbx OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable all DCBX-related syslog and SNMP traps."
    ::= { agLog 86 }

agNewCfgSyslogTrapFcoe OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable or disable all FCOE-related syslog and SNMP traps."
    ::= { agLog 87 }

agCurCfgSyslogTrapFcoe OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable all FCOE-related syslog and SNMP traps."
    ::= { agLog 88 }

agNewCfgSyslogTrapVm OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable or disable all VM-related syslog and SNMP traps."
    ::= { agLog 89 }

agCurCfgSyslogTrapVm OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable all VM-related syslog and SNMP traps."
    ::= { agLog 90 }

agNewCfgSyslogTrapVnic OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable or disable all VNIC-related syslog and SNMP traps."
    ::= { agLog 91 }

agCurCfgSyslogTrapVnic OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable all VNIC-related syslog and SNMP traps."
    ::= { agLog 92 }

agNewCfgSyslogTrapCfgchg OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable or disable configuration change related syslog and SNMP trap
         in the new configuration block." 
    ::= { agLog 93 }

agCurCfgSyslogTrapCfgchg OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable configuration change related syslog and SNMP trap, 
         as configured in the current configuration block." 
    ::= { agLog 94 }

agNewCfgSyslogTrapVlag OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable or disable Vlag related syslog and SNMP trap." 
    ::= { agLog 95 }

agCurCfgSyslogTrapVlag OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable Vlag related syslog and SNMP trap." 
    ::= { agLog 96 }


agNewCfgSyslogTrapIgmpGroup OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable or disable all IGMP GROUP-related syslog and SNMP traps."
    ::= { agLog 99 }

agCurCfgSyslogTrapIgmpGroup OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable all IGMP GROUP-related syslog and SNMP traps."
    ::= { agLog 100 }

agNewCfgSyslogTrapIgmpMrouter OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable or disable all IGMP MROUTER-related syslog and SNMP traps."
    ::= { agLog 101 }

agCurCfgSyslogTrapIgmpMrouter OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable all IGMP MROUTER-related syslog and SNMP traps."
    ::= { agLog 102 }

agNewCfgSyslogTrapIgmpQuerier OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable or disable all IGMP QUERIER-related syslog and SNMP traps."
    ::= { agLog 103 }

agCurCfgSyslogTrapIgmpQuerier OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable all IGMP QUERIER-related syslog and SNMP traps."
    ::= { agLog 104 }

agNewCfgSyslogTrapMld OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable or disable all MLD-related syslog and SNMP traps."
    ::= { agLog 105 }

agCurCfgSyslogTrapMld OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable all MLD-related syslog and SNMP traps."
    ::= { agLog 106 }


-- TFTP Config
agTransferServer OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..128))
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The FTP/TFTP server IP address or domain name."
    ::= { agTransfer 1 }

agTransferImage OBJECT-TYPE
    SYNTAX  INTEGER {
        image1(2),
        image2(3),
        boot(4)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Whether the image file should be loaded in image1 or image2 in flash."
    ::= { agTransfer 2 }

agTransferImageFileName OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..128))
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The image file name to be downloaded."
    ::= { agTransfer 3 }

agTransferCfgFileName OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..128))
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The configuration file name."
    ::= { agTransfer 4 }

agTransferDumpFileName OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..128))
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The core dump file name."
    ::= { agTransfer 5 }

agTransferAction OBJECT-TYPE
    SYNTAX  INTEGER {
        other(1),
        img-get(2),
        cfg-get(3),
        cfg-put(4),
        dump-put(5),
        img-put(7),
        tsdump-put(8)
        ,ca-get(14)
        ,hostcert-get(15)
        ,hostkey-get(16)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "This is an action object to perform various FTP/TFTP Get or Put functions.
         The FTP/TFTP sever is specified in agTransferServer object.
	 img-get(2)    - Download switch image from a specified image
                         file(agTransferImageFileName) on the FTP/TFTP server to
	                 the destinated storage(agTransferImage).
                         The duration of the action will depend on the image 
                         downloading and writting time on the network element.
                         Sugguest 150 seconds timeout setting in MIB Browser to get 
                         the correct response for this action.
	 cfg-get(3)    - Download switch configuration from a specified
                         file(agTransferCfgFileName) on the FTP/TFTP server.
	 cfg-put(4)    - Upload switch configuration to a specified
                         file(agTransferCfgFileName) on the FTP/TFTP server.
	 dump-put(5)   - Download switch core dump to a specified
                         file(agTransferDumpFileName) on the FTP/TFTP server.
	 bkpdump-put(6)- Download switch backup core dump to a specified
                         file(agTransferDumpFileName) on the FTP/TFTP server.
         img-put(7)    - Upload specified switch image to a specified image
                         file(agTransferImageFileName) on the FTP/TFTP server.
         tsdump-put(8) - Download switch tech support dump to a specified
                         file(agTransferTSDumpFileName) on the FTP/TFTP server.
	 bogon-get(9)  - Download bogon config file from a specified bogon
                         file(uses agTransferImageFileName) on the FTP/TFTP server.
    ca-get(14)         - Download CA root certificate from a specified
                         file(agTransferCaFileName) on the TFTP server. 
                         This command did not support FTP.
    hostcert-get(15)   - Download host certificate from a specified
                         file(agTransferHostCertFileName) on the TFTP server.
                         This command did not support FTP.
    hostkey-get(16)    - Download host private key from a specified
                         file(agTransferHostKeyFileName) on the TFTP server.
                         This command did not support FTP.
         other(1) is returned always when read."
    ::= { agTransfer 6 }

agTransferLastActionStatus OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..128))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The recorded status of the previous FTP/TFTP activity."
    ::= { agTransfer 7 }

agTransferPort OBJECT-TYPE
    SYNTAX  INTEGER {
        data(1),
        mgta(2),
        mgtb(3)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Specify whether the FTP/TFTP operation should be performed over the
         data port or the management port."
    ::= { agTransfer 8 }

agTransferUserName OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..128))
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The username for the FTP server or blank for TFTP server."
    ::= { agTransfer 9 }

agTransferPassword OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..128))
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The password for the FTP server. For security reason, an empty string will be returned when the OID is read."
    ::= { agTransfer 10 }

agTransferTSDumpFileName OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..128))
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The TS dump file name."
    ::= { agTransfer 11 }


agTransferLastConfigurationActionStatus OBJECT-TYPE
    SYNTAX INTEGER {
        successfully(1),
        failed(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The status of the last configuration action using the file ftp/tftp'd
         from server."
    ::= { agTransfer 14 }

agTransferCaFileName OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..128))
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The CA certificate file name."
    ::= { agTransfer 15 }
    
agTransferHostCertFileName OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..128))
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The Host certificate file name."
    ::= { agTransfer 16 }
    
agTransferHostKeyFileName OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..128))
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The Host private key file name."
    ::= { agTransfer 17 }


    
-- Agent Port Table

agPortTableMaxEnt OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The maximum number of rows in the port configuration host table."
    ::= { agPortConfig 1 }

agPortCurCfgTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF AgPortCurCfgTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table of port configuration in the current configuration block."
    ::= { agPortConfig 2 }

agPortCurCfgTableEntry OBJECT-TYPE
    SYNTAX  AgPortCurCfgTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A row in the port table in the current configuration block."
    INDEX   { agPortCurCfgIndx }
    ::= { agPortCurCfgTable 1 }

AgPortCurCfgTableEntry ::= SEQUENCE {
    agPortCurCfgIndx             PortNumber,
    agPortCurCfgState            INTEGER,
    agPortCurCfgVlanTag          INTEGER,
    agPortCurCfgRmon             INTEGER,
    agPortCurCfgPVID             Integer32,
    agPortCurCfgGigEthFctl       INTEGER,
    agPortCurCfgLinkTrap         INTEGER,

    agPortCurCfgDscpRemarking    INTEGER,
    agPortCurCfgTagPVID          INTEGER,
    agPortCurCfgMulticastThreshold         INTEGER,
    agPortCurCfgMulticastThresholdRate     INTEGER,
    agPortCurCfgBroadcastThreshold         INTEGER,
    agPortCurCfgBroadcastThresholdRate     INTEGER,
    agPortCurCfgDLFThreshold               INTEGER,
    agPortCurCfgDLFThresholdRate           INTEGER,
    agPortCurCfgPortAlias        DisplayString,
    agPortCurCfgPortName         DisplayString
   ,agPortCurCfgLearning         INTEGER
   ,agPortCurCfgFloodBlocking    INTEGER
   ,agPortCurCfgType             DisplayString
   ,agPortCurCfgLinkType         INTEGER
   ,agPortCurCfgEdge             INTEGER
   ,agPortCurCfgErrDisableRecovery        INTEGER
   ,agPortCurCfgUdld             INTEGER
   ,agPortCurCfgUdldMode         INTEGER
   ,agPortCurCfgOam              INTEGER
   ,agPortCurCfgOamMode          INTEGER
   ,agPortCurCfgBpduGuard        INTEGER
   ,agPortCurCfgMacAddrNotif     INTEGER
   ,agPortCurCfgStpExtGuard      INTEGER
   ,agPortCurCfgLFDStatus       INTEGER
    }

agPortCurCfgIndx OBJECT-TYPE
    SYNTAX  PortNumber
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The index of the row in port configurations table."
    ::= { agPortCurCfgTableEntry 1 }

agPortCurCfgState OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(2),
        disabled(3)
	}
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "This is the state of the port."
    ::= { agPortCurCfgTableEntry 2 }

agPortCurCfgVlanTag OBJECT-TYPE
    SYNTAX  INTEGER {
        tagged(2),
        untagged(3)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "This is VLAN tag state of the port"
    ::= { agPortCurCfgTableEntry 3 }


agPortCurCfgRmon OBJECT-TYPE
    SYNTAX  INTEGER {
        on(2),
        off(3)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "This object is used to turn RMON on or off on the port."
   ::= { agPortCurCfgTableEntry 5 }

agPortCurCfgPVID OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The default VLAN ID for the port.
        "
    ::= { agPortCurCfgTableEntry 6 }



agPortCurCfgGigEthFctl OBJECT-TYPE
    SYNTAX  INTEGER {
        transmit(2),
        receive(3),
        both(4),
        none(5)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "This object is used to select port flow control for
         gigabit Ethernet connection."
    ::= { agPortCurCfgTableEntry 12 }

agPortCurCfgPortName	OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..63))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The switch port name."
    ::= { agPortCurCfgTableEntry 13 }



agPortCurCfgLinkTrap OBJECT-TYPE
    SYNTAX  INTEGER {
	enabled(1),
	disabled(2)
    }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Indicates whether linkUp/linkDown traps should be
        generated for this interface.

        By default, this object should have the value
        enabled(1) for interfaces which do not operate on
        'top' of any other interface (as defined in the
        ifStackTable), and disabled(2) otherwise."
    ::= { agPortCurCfgTableEntry 16 }





agPortCurCfgDscpRemarking OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable Dscp remarking for the switch port."
    ::= { agPortCurCfgTableEntry 23 }

agPortCurCfgPortAlias    OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..15))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The switch port alias."
    ::= { agPortCurCfgTableEntry 24 }

agPortCurCfgTagPVID OBJECT-TYPE
    SYNTAX  INTEGER {
        tagged(2),
        untagged(3)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "This is PVID tag state of the port"
    ::= { agPortCurCfgTableEntry 25 }

agPortCurCfgLearning OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable L2 (FDB) Learning for the switch port."
    ::= { agPortCurCfgTableEntry 26 }

agPortCurCfgFloodBlocking OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable flood blocking for the switch port."
    ::= { agPortCurCfgTableEntry 27 }


agPortCurCfgType OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..7))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The switch port type."
    ::= { agPortCurCfgTableEntry 29 }


agPortCurCfgLinkType OBJECT-TYPE
    SYNTAX INTEGER {
        auto(1),
        p2p(2),
        shared(3)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The type of port connection. (for PVRST only)"
    ::= { agPortCurCfgTableEntry 30 }

agPortCurCfgEdge OBJECT-TYPE
    SYNTAX INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The state of port edge."
    ::= { agPortCurCfgTableEntry 31 }





agPortCurCfgErrDisableRecovery OBJECT-TYPE
    SYNTAX      INTEGER {
                    enable(1),
                    disable(2)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object indicates whether the system will automatically
         re-enable this port if it becomes error-disabled. This port
         will be re-enabled after the time interval specified by the
         agCurCfgErrDisableTimeout object has elapsed.

         A port is in error-disabled state when it is operationally
         disabled due to abnormal conditions detected on the port.

         If this port is error-disabled, it will only be re-enabled
         by the system if the agCurCfgErrDisableRecovery object and
         this object both have a value of 'enable(1)'."
    DEFVAL      { enable }
    ::= { agPortCurCfgTableEntry 35 }


agPortCurCfgUdld OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable UDLD for the switch port."
    ::= { agPortCurCfgTableEntry 37 }

agPortCurCfgUdldMode OBJECT-TYPE
    SYNTAX  INTEGER {
        normal(1),
        aggressive(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable UDLD mode for the switch port."
    ::= { agPortCurCfgTableEntry 38 }

agPortCurCfgOam OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable OAM Discovery process for the switch port."
    ::= { agPortCurCfgTableEntry 39 }

agPortCurCfgOamMode OBJECT-TYPE
    SYNTAX  INTEGER {
        active(1),
        passive(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable OAM mode for the switch port."
    ::= { agPortCurCfgTableEntry 40 }

agPortCurCfgBpduGuard OBJECT-TYPE
    SYNTAX INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Enable or disable BPDU guard for the switch port."
    ::= { agPortCurCfgTableEntry 41 }


agPortCurCfgMulticastThreshold OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Current status of the port's Multicast Threshold."
    ::= { agPortCurCfgTableEntry 42 }

agPortCurCfgMulticastThresholdRate OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Current port's Multicast Threshold Rate."
    ::= { agPortCurCfgTableEntry 43 }

agPortCurCfgBroadcastThreshold OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Current status of the port's Broadcast Threshold."
    ::= { agPortCurCfgTableEntry 44 }

agPortCurCfgBroadcastThresholdRate OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Current port's Broadcast Threshold Rate."
    ::= { agPortCurCfgTableEntry 45 }

agPortCurCfgDLFThreshold OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Current status of the port's Destination Lookup Fail Threshold."
    ::= { agPortCurCfgTableEntry 46 }

agPortCurCfgDLFThresholdRate OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Current port's Destination Lookup Fail Threshold Rate."
    ::= { agPortCurCfgTableEntry 47 }

agPortCurCfgMacAddrNotif OBJECT-TYPE
    SYNTAX  INTEGER{
        enabled(2),
        disabled(3)
	}
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "This is the state of the MAC address notification
         syslog messages on the port."
    ::= { agPortCurCfgTableEntry 48 }




agPortCurCfgStpExtGuard OBJECT-TYPE
    SYNTAX  INTEGER {
        loop(1),
        root(2),
        none(3),
        default(0)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Current state for spanning tree guard type"
    ::= { agPortCurCfgTableEntry 52 }
    
agPortCurCfgLFDStatus OBJECT-TYPE
    SYNTAX      INTEGER {
                    enable(1),
                    disable(2)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object indicates whether the system will put this port
         in an error-disabled state due to excessive link flaps.

         A port will be put in an error-disabled state due to 
         excessive link flaps if this object and the global
         agCurCfgLFDStatus object both have a value of 'enable'.
         A port has an excessive number of link flaps if the number
         of link flaps detected during a time period in seconds
         indicated by agCurCfgLFDTime exceeds the maximum number of
         allowed flaps indicated by agCurCfgLFDFlaps."
    DEFVAL      { enable }
    ::= { agPortCurCfgTableEntry 53 }







agPortNewCfgTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF AgPortNewCfgTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table of port configuration in the new configuration block."
    ::= { agPortConfig 3 }

agPortNewCfgTableEntry OBJECT-TYPE
    SYNTAX  AgPortNewCfgTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A row in the port configuration table in the new configuration block."
    INDEX   { agPortNewCfgIndx }
    ::= { agPortNewCfgTable 1 }

AgPortNewCfgTableEntry ::= SEQUENCE {
    agPortNewCfgIndx             PortNumber,
    agPortNewCfgState            INTEGER,
    agPortNewCfgVlanTag          INTEGER,
    agPortNewCfgRmon             INTEGER,
    agPortNewCfgPVID             Integer32,
    agPortNewCfgGigEthFctl       INTEGER,
    agPortNewCfgLinkTrap         INTEGER,
    agPortNewCfgDscpRemarking    INTEGER,
    agPortNewCfgTagPVID          INTEGER,
    agPortNewCfgMulticastThreshold        INTEGER,
    agPortNewCfgMulticastThresholdRate     INTEGER,
    agPortNewCfgBroadcastThreshold         INTEGER,
    agPortNewCfgBroadcastThresholdRate     INTEGER,
    agPortNewCfgDLFThreshold               INTEGER,
    agPortNewCfgDLFThresholdRate           INTEGER,
    agPortNewCfgPortName         DisplayString
   ,agPortNewCfgLearning         INTEGER
   ,agPortNewCfgFloodBlocking    INTEGER
   ,agPortNewCfgType             DisplayString
   ,agPortNewCfgLinkType         INTEGER
   ,agPortNewCfgEdge             INTEGER
   ,agPortNewCfgErrDisableRecovery INTEGER
   ,agPortNewCfgUdld             INTEGER
   ,agPortNewCfgUdldMode         INTEGER
   ,agPortNewCfgOam              INTEGER
   ,agPortNewCfgOamMode          INTEGER
   ,agPortNewCfgBpduGuard        INTEGER
   ,agPortNewCfgMacAddrNotif     INTEGER

   ,agPortNewCfgStpExtGuard      INTEGER
   ,agPortNewCfgLFDStatus        INTEGER
    }

agPortNewCfgIndx OBJECT-TYPE
    SYNTAX  PortNumber
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The index of the row in port configurations table."
    ::= { agPortNewCfgTableEntry 1 }

agPortNewCfgState OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(2),
        disabled(3)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "This is the state of the port."
    ::= { agPortNewCfgTableEntry 2 }

agPortNewCfgVlanTag OBJECT-TYPE
    SYNTAX  INTEGER {
        tagged(2),
        untagged(3)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "This is VLAN tag state of the port"
    ::= { agPortNewCfgTableEntry 3 }


agPortNewCfgRmon OBJECT-TYPE
    SYNTAX  INTEGER {
        on(2),
        off(3)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "This object is used to turn RMON on or off on the port."
    ::= { agPortNewCfgTableEntry 5 }

agPortNewCfgPVID OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The default VLAN ID for the port.
        "
    ::= { agPortNewCfgTableEntry 6 }



agPortNewCfgGigEthFctl OBJECT-TYPE
    SYNTAX  INTEGER {
        transmit(2),
        receive(3),
        both(4),
        none(5)
       }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "This object is used to select port flow control for
         gigabit Ethernet connection."
    ::= { agPortNewCfgTableEntry 12 }

agPortNewCfgPortName	OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..64))
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The switch port name."
    ::= { agPortNewCfgTableEntry 13 }



agPortNewCfgLinkTrap OBJECT-TYPE
    SYNTAX  INTEGER {
	enabled(1),
	disabled(2)
    }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Indicates whether linkUp/linkDown traps should be
        generated for this interface.

        By default, this object should have the value
        enabled(1) for interfaces which do not operate on
        'top' of any other interface (as defined in the
        ifStackTable), and disabled(2) otherwise."
    ::= { agPortNewCfgTableEntry 16 }





agPortNewCfgDscpRemarking OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable or disable Dscp remarking for the switch port."
    ::= { agPortNewCfgTableEntry 23 }


agPortNewCfgTagPVID OBJECT-TYPE
    SYNTAX  INTEGER {
        tagged(2),
        untagged(3)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "This is PVID tag state of the port"
    ::= { agPortNewCfgTableEntry 25 }

agPortNewCfgLearning OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable or disable L2 (FDB) Learning for the switch port."
    ::= { agPortNewCfgTableEntry 26 }

agPortNewCfgFloodBlocking OBJECT-TYPE
    SYNTAX INTEGER {
	enabled(1),
	disabled(2)
	}
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
	"Enable or disable flood blocking for the switch port."
    ::= { agPortNewCfgTableEntry 27 }


agPortNewCfgType OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..7))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The switch port type."
    ::= { agPortNewCfgTableEntry 29 }


agPortNewCfgLinkType OBJECT-TYPE
    SYNTAX INTEGER {
        auto(1),
        p2p(2),
        shared(3)
        }
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "The type of port connection. (for PVRST only)"
    ::= { agPortNewCfgTableEntry 30 }

agPortNewCfgEdge OBJECT-TYPE
    SYNTAX INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "The state of port edge."
    ::= { agPortNewCfgTableEntry 31 }




agPortNewCfgErrDisableRecovery OBJECT-TYPE
    SYNTAX      INTEGER {
                    enable(1),
                    disable(2)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object specifies whether the system should automatically
         re-enable this port when it becomes error-disabled.  Use this
         object to change the port-level setting of the error-disable
         recovery action."
    DEFVAL      { enable }
    ::= { agPortNewCfgTableEntry 35 }


agPortNewCfgUdld OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable or disable UDLD for the switch port."
    ::= { agPortNewCfgTableEntry 37 }

agPortNewCfgUdldMode OBJECT-TYPE
    SYNTAX  INTEGER {
        normal(1),
        aggressive(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable or disable UDLD mode for the switch port."
    ::= { agPortNewCfgTableEntry 38 }

agPortNewCfgOam OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable or disable OAM Discovery process for the switch port."
    ::= { agPortNewCfgTableEntry 39 }

agPortNewCfgOamMode OBJECT-TYPE
    SYNTAX  INTEGER {
        active(1),
        passive(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable or disable OAM mode for the switch port."
    ::= { agPortNewCfgTableEntry 40 }

agPortNewCfgBpduGuard OBJECT-TYPE
    SYNTAX INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Enable or disable BPDU guard for the switch port."
    ::= { agPortNewCfgTableEntry 41 }


agPortNewCfgMulticastThreshold OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "New status of the port's Multicast Threshold."
    ::= { agPortNewCfgTableEntry 42 }

agPortNewCfgMulticastThresholdRate OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "New port's Multicast Threshold Rate."
    ::= { agPortNewCfgTableEntry 43 }

agPortNewCfgBroadcastThreshold OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "New status of the port's Broadcast Threshold."
    ::= { agPortNewCfgTableEntry 44 }

agPortNewCfgBroadcastThresholdRate OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "New port's Broadcast Threshold Rate."
    ::= { agPortNewCfgTableEntry 45 }

agPortNewCfgDLFThreshold OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "New status of the port's Destination Lookup Fail Threshold."
    ::= { agPortNewCfgTableEntry 46 }

agPortNewCfgDLFThresholdRate OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "New port's Destination Lookup Fail Threshold Rate."
    ::= { agPortNewCfgTableEntry 47 }

agPortNewCfgMacAddrNotif OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(2),
        disabled(3)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enables or Disables the MAC address notification
         syslog messages on the port."
    ::= { agPortNewCfgTableEntry 48 }




agPortNewCfgStpExtGuard OBJECT-TYPE
    SYNTAX  INTEGER {
        loop(1),
        root(2),
        none(3),
        default(0)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Set spanning tree guard type"
    ::= { agPortNewCfgTableEntry 52 }

agPortNewCfgLFDStatus OBJECT-TYPE
    SYNTAX      INTEGER {
                    enable(1),
                    disable(2)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object indicates whether the system should put this port
         in an error-disabled state due to excessive link flaps.
         Use this object to change the port setting of the Link Flap
         Dampening error-disable action."
    DEFVAL      { enable }
    ::= { agPortNewCfgTableEntry 53 }







-- Agent Fast Forwarding Port Table

-- Agent Fast Forwarding Port Table


-- SSH Configuration
sshCurCfgScpAdm OBJECT-TYPE
    SYNTAX DisplayString(SIZE(0..128))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "SCP-only admin password."
    ::= { agSSHConfig 3 }

sshNewCfgScpAdm OBJECT-TYPE
    SYNTAX DisplayString(SIZE(0..128))
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Set SCP-only admin password."
    ::= { agSSHConfig 4 }

sshNewCfgHKeyGen OBJECT-TYPE
    SYNTAX INTEGER {
        generate(1),
        other(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "This is an action object to generate the RSA host key.
         other(2) is returned always when read.
         The following values are writable: generate(1).. Generate the RSA host key."
    ::= { agSSHConfig 5 }

sshCurCfgSSHPort OBJECT-TYPE
    SYNTAX INTEGER (1..65535)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "SSH server port number."
    ::= { agSSHConfig 7 }

sshNewCfgSSHPort OBJECT-TYPE
    SYNTAX INTEGER (1..65535)
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Set SSH server port number."
    ::= { agSSHConfig 8 }

sshCurCfgScpApplySave OBJECT-TYPE
    SYNTAX INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "SCP apply and save."
    ::= { agSSHConfig 9 }

sshNewCfgScpApplySave OBJECT-TYPE
    SYNTAX INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable/Disable the SCP apply and save."
    ::= { agSSHConfig 10 }

sshCurCfgStatus OBJECT-TYPE
    SYNTAX INTEGER {
        on(1),
        off(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "SSH server status."
    ::= { agSSHConfig 11 }

sshNewCfgStatus OBJECT-TYPE
    SYNTAX INTEGER {
        on(1),
        off(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Turn SSH server ON/OFF."
    ::= { agSSHConfig 12 }


-- RADIUS Configuration

radCurCfgPrimaryServer OBJECT-TYPE
    SYNTAX  IpAddress
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The IP address of the Primary RADIUS server."
    ::= { agRadiusConfig 1 }

radNewCfgPrimaryServer OBJECT-TYPE
    SYNTAX  IpAddress
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The IP address of the Primary RADIUS server."
    ::= { agRadiusConfig 2 }

radCurCfgSecondaryServer OBJECT-TYPE
    SYNTAX  IpAddress
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The IP address of the Secondary RADIUS server."
    ::= { agRadiusConfig 3 }

radNewCfgSecondaryServer OBJECT-TYPE
    SYNTAX  IpAddress
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The IP address of the Secondary RADIUS server."
    ::= { agRadiusConfig 4 }

radCurCfgPort OBJECT-TYPE
    SYNTAX  INTEGER  (1500..3000)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Specify the RADIUS port number."
    ::= { agRadiusConfig 5 }

radNewCfgPort OBJECT-TYPE
    SYNTAX  INTEGER  (1500..3000)
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Specify the RADIUS port number."
    ::= { agRadiusConfig 6 }

radCurCfgTimeout OBJECT-TYPE
    SYNTAX  INTEGER  (1..10)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The maximum number of seconds before resending authentication
         to RADIUS server."
    ::= { agRadiusConfig 7 }

radNewCfgTimeout OBJECT-TYPE
    SYNTAX  INTEGER  (1..10)
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The maximum number of seconds before resending authentication
         to RADIUS server."
    ::= { agRadiusConfig 8 }

radCurCfgRetries OBJECT-TYPE
    SYNTAX  INTEGER  (1..3)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Number of retries to the RADIUS server."
    ::= { agRadiusConfig 9 }

radNewCfgRetries OBJECT-TYPE
    SYNTAX  INTEGER  (1..3)
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Number of retries to the RADIUS server."
    ::= { agRadiusConfig 10 }

radCurCfgState OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(0)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable RADIUS authentication."
    ::= { agRadiusConfig 11 }

radNewCfgState OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(0)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable or disable RADIUS authentication."
    ::= { agRadiusConfig 12 }

radCurCfgAuthenString OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..32))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The RADIUS authentication string."
    ::= { agRadiusConfig 13 }

radNewCfgAuthenString OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..32))
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The RADIUS authentication string."
    ::= { agRadiusConfig 14 }

radCurCfgBackdoor OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable RADIUS backdoor for telnet/ssh/http/https."
    ::= { agRadiusConfig 15 }

radNewCfgBackdoor OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable or disable RADIUS backdoor for telnet/ssh/http/https."
    ::= { agRadiusConfig 16 }

radCurCfgAuthenSecondString OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..32))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The second RADIUS authentication string."
    ::= { agRadiusConfig 17 }

radNewCfgAuthenSecondString OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..32))
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The second RADIUS authentication string."
    ::= { agRadiusConfig 18 }

radCurCfgSecBd OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable RADIUS secure backdoor for telnet."
    ::= { agRadiusConfig 19 }

radNewCfgSecBd OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable or disable RADIUS secure backdoor for telnet."
    ::= { agRadiusConfig 20 }

radCurCfgPorttoUse OBJECT-TYPE
    SYNTAX  INTEGER {
        data(1),
        mgta(2),
        mgtb(3)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Specify whether the Radius should be performed over the
         data port or the management port."
    ::= { agRadiusConfig 21 }

radNewCfgPorttoUse OBJECT-TYPE
    SYNTAX  INTEGER {
        data(1),
        mgta(2),
        mgtb(3)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Specify whether the Radius should be performed over the
         data port or the management port."
    ::= { agRadiusConfig 22 }

radCurCfgSecPorttoUse OBJECT-TYPE
    SYNTAX  INTEGER {
        data(1),
        mgta(2),
        mgtb(3)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Specify whether the Radius should be performed over the
         data port or the management port."
    ::= { agRadiusConfig 23 }

radNewCfgSecPorttoUse OBJECT-TYPE
    SYNTAX  INTEGER {
        data(1),
        mgta(2),
        mgtb(3)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Specify whether the Radius should be performed over the
         data port or the management port."
    ::= { agRadiusConfig 24 }

radCurCfgSrcLoopIf OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The index of the loopback interface that should be used
         for the source IP of the Radius message; 0 means that
         no loopback interface is used as the source of the Radius message."
    ::= { agRadiusConfig 25 }

radNewCfgSrcLoopIf OBJECT-TYPE
    SYNTAX  INTEGER 
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The index of the loopback interface that should be used
         for the source IP of the Radius message; 0 means that
         no loopback interface is used as the source of the Radius message."
    ::= { agRadiusConfig 26 }

-- NTP Configuration
agCurCfgNTPServer OBJECT-TYPE
    SYNTAX DisplayString (SIZE(0..46))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The NTP Server Address."
    ::= { agNTP 1 }

agNewCfgNTPServer OBJECT-TYPE
    SYNTAX DisplayString (SIZE(0..46))
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The NTP Server Address."
    ::= { agNTP 2 }

agCurCfgNTPResyncInterval OBJECT-TYPE
    SYNTAX  INTEGER (5..44640)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The NTP Server resync interval in minutes."
    ::= { agNTP 3 }

agNewCfgNTPResyncInterval OBJECT-TYPE
    SYNTAX  INTEGER (5..44640)
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The NTP Server resync interval in minutes."
    ::= { agNTP 4 }


agCurCfgNTPService OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable/disable NTP Service."
    ::= { agNTP 9 }

agNewCfgNTPService OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable/disable NTP Service."
    ::= { agNTP 10 }

agCurCfgNTPSecServer OBJECT-TYPE
    SYNTAX DisplayString (SIZE(0..46))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The Secondary NTP Server Address."
    ::= { agNTP 11 }

agNewCfgNTPSecServer OBJECT-TYPE
    SYNTAX DisplayString (SIZE(0..46))
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The Secondary NTP Server Address."
    ::= { agNTP 12 }

agCurCfgNTPServerPort OBJECT-TYPE
    SYNTAX  INTEGER {
        data(1),
        mgta(2),
        mgtb(3)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Choose the port that the primary server is connected to."
    ::= { agNTP 13 }

agNewCfgNTPServerPort OBJECT-TYPE
    SYNTAX  INTEGER {
        data(1),
        mgta(2),
        mgtb(3)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Choose the port that the primary server is connected to."
    ::= { agNTP 14 }
agCurCfgNTPSecServerPort OBJECT-TYPE
    SYNTAX  INTEGER {
        data(1),
        mgta(2),
        mgtb(3)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Choose the port that the secondary server is connected to."
    ::= { agNTP 15 }

agNewCfgNTPSecServerPort OBJECT-TYPE
    SYNTAX  INTEGER {
        data(1),
        mgta(2),
        mgtb(3)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Choose the port that the secondary server is connected to."
    ::= { agNTP 16 }

agCurCfgNTPSrcLoopIf OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The index of the loopback interface that should be used
         for the source IP of the NTP packet; 0 means that
         no loopback interface is used as the source of the NTP packet."
    ::= { agNTP 17 }

agNewCfgNTPSrcLoopIf OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The index of the loopback interface that should be used
         for the source IP of the NTP packet; 0 means that
         no loopback interface is used as the source of the NTP packet."
    ::= { agNTP 18 }


-- APPLY Configuration
agApplyPending OBJECT-TYPE
    SYNTAX  INTEGER {
        applyNeeded(2),
        noApplyNeeded(3)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "This object, when read, gives the user information
         whether an apply action is needed and that the configuration
         has been chaged by the user actions. The user then can
         apply the changes by setting proper value to the object
         agApplyConfiguration described above."
    ::= { agApply 1 }

agApplyConfig OBJECT-TYPE
    SYNTAX  INTEGER {
        apply(1),
        idle(2),
        inprogress(3),
        complete(4),
        failed(5)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
         "When this object is read the current state is returned.
          idle(1) indicates that there is no apply in progess.
          complete(4) indicates that the last apply operation is completed.
          Setting the value to apply(1), will write all the changes made
          since the last apply to the current configuration block.
	  If the apply is successful this variable will return the state
          'complete' else it will return 'failed'. In case of failure,
          to read the reason for failure use the agApplyTable.
          Once the operation is completed or the agApplyTable is read in case
          of failure, the apply buffer needs to be freed and the agApplyState
          should be set back to 'idle' state so others can issue the apply
          command via SNMP."
    ::= { agApply 2 }

agApplyTableSize OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The number of strings in the apply table."
    ::= { agApply 4 }

agApplyTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF AgApplyTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table of failure reasons for an apply of current
         configuration block changes."
    ::= { agApply 5 }

agApplyTableEntry OBJECT-TYPE
    SYNTAX  AgApplyTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A row in the table of failure reasons for an apply
         (information about a particular reason of failure)."
    INDEX   { agApplyIndex }
    ::= { agApplyTable 1 }

AgApplyTableEntry ::= SEQUENCE {
    agApplyIndex      Integer32,
    agApplyString     OCTET STRING
    }

agApplyIndex OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The table index."
    ::= { agApplyTableEntry 1 }

agApplyString OBJECT-TYPE
    SYNTAX  OCTET STRING
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "A string in the apply table."
    ::= { agApplyTableEntry 2 }




-- TACACS+ Configuration

tacCurCfgPrimaryServer OBJECT-TYPE
    SYNTAX  IpAddress
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The IP address of the Primary TACACS+ server."
    ::= { agTacacsConfig 1 }

tacNewCfgPrimaryServer OBJECT-TYPE
    SYNTAX  IpAddress
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The IP address of the Primary TACACS+ server."
    ::= { agTacacsConfig 2 }

tacCurCfgSecondaryServer OBJECT-TYPE
    SYNTAX  IpAddress
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The IP address of the Secondary TACACS+ server."
    ::= { agTacacsConfig 3 }

tacNewCfgSecondaryServer OBJECT-TYPE
    SYNTAX  IpAddress
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The IP address of the Secondary TACACS+ server."
    ::= { agTacacsConfig 4 }


tacCurCfgPort OBJECT-TYPE
    SYNTAX  INTEGER  (1..65000)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Specify the TACACS+ port number."
    ::= { agTacacsConfig 5 }

tacNewCfgPort OBJECT-TYPE
    SYNTAX  INTEGER  (1..65000)
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Specify the TACACS+ port number."
    ::= { agTacacsConfig 6 }

tacCurCfgTimeout OBJECT-TYPE
    SYNTAX  INTEGER  (4..15)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The maximum number of seconds before resending authentication
         to TACACS+ server."
    ::= { agTacacsConfig 7 }

tacNewCfgTimeout OBJECT-TYPE
    SYNTAX  INTEGER  (4..15)
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The maximum number of seconds before resending authentication
         to TACACS+ server."
    ::= { agTacacsConfig 8 }

tacCurCfgRetries OBJECT-TYPE
    SYNTAX  INTEGER  (1..3)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Number of retries to the TACACS+ server."
    ::= { agTacacsConfig 9 }

tacNewCfgRetries OBJECT-TYPE
    SYNTAX  INTEGER  (1..3)
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Number of retries to the TACACS+ server."
    ::= { agTacacsConfig 10 }

tacCurCfgState OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(0)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable TACACS+ authentication."
    ::= { agTacacsConfig 11 }

tacNewCfgState OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(0)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable or disable TACACS+ authentication."
    ::= { agTacacsConfig 12 }

tacCurCfgAuthenString OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..32))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The TACACS+ authentication string."
    ::= { agTacacsConfig 13 }

tacNewCfgAuthenString OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..32))
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The TACACS+ authentication string."
    ::= { agTacacsConfig 14 }

tacCurCfgBackdoor OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable TACACS+ backdoor for telnet/ssh/http/https."
    ::= { agTacacsConfig 15 }

tacNewCfgBackdoor OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable or disable TACACS+ backdoor for telnet/ssh/http/https."
    ::= { agTacacsConfig 16 }

tacCurCfgAuthenSecondString OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..32))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The second TACACS+ authentication string."
    ::= { agTacacsConfig 17 }

tacNewCfgAuthenSecondString OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..32))
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The second TACACS+ authentication string."
    ::= { agTacacsConfig 18 }

tacCurCfgCmdAuthor OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable TACACS+ command authorization."
    ::= { agTacacsConfig 19 }

tacNewCfgCmdAuthor OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable or disable TACACS+ command authorization."
    ::= { agTacacsConfig 20 }

tacCurCfgCmdLogging OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable TACACS+ command logging."
    ::= { agTacacsConfig 21 }

tacNewCfgCmdLogging OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable or disable TACACS+ command logging."
    ::= { agTacacsConfig 22 }

tacCurCfgSecBd OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable TACACS+ secure backdoor for telnet."
    ::= { agTacacsConfig 23 }

tacNewCfgSecBd OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable or disable TACACS+ secure backdoor for telnet."
    ::= { agTacacsConfig 24 }
tacCurCfgCmap OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable/Disable Tacacs+ new privilege level mapping, as
         configured in the current configuration block."
    ::= { agTacacsConfig 25 }

tacNewCfgCmap OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable/Disable Tacacs+ new privilege level mapping."
    ::= { agTacacsConfig 26 }
tacCurCfgEnaPassChange OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        " Enable/Disable Tacacs+ password change."
    ::= { agTacacsConfig 29 }

tacNewCfgEnaPassChange OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        " Enable/Disable Tacacs+ password change."
    ::= { agTacacsConfig 30 }

tacChangePassForUser OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..32))
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The username for changing server password."
    ::= { agTacacsConfig 31 }

tacChangePassCurPass OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..32))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The current password for tacacs server."
    ::= { agTacacsConfig 32 }

tacChangePassNewPass OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..32))
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The new password for tacacs server."
    ::= { agTacacsConfig 33 }

tacChangePassForServer OBJECT-TYPE
    SYNTAX  INTEGER {
        primary(1),
        secondary(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Change password for <1/2> Tacacs+ server."
    ::= { agTacacsConfig 34 }

tacCurCfgPorttoUse OBJECT-TYPE
    SYNTAX  INTEGER {
        data(1),
        mgta(2),
        mgtb(3)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Specify whether the Tacacs should be performed over the
         data port or the management port."
    ::= { agTacacsConfig 35 }

tacNewCfgPorttoUse OBJECT-TYPE
    SYNTAX  INTEGER {
        data(1),
        mgta(2),
        mgtb(3)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Specify whether the Tacacs should be performed over the
         data port or the management port."
    ::= { agTacacsConfig 36 }

tacCurCfgSecPorttoUse OBJECT-TYPE
    SYNTAX  INTEGER {
        data(1),
        mgta(2),
        mgtb(3)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Specify whether the Tacacs should be performed over the
         data port or the management port."
    ::= { agTacacsConfig 37 }

tacNewCfgSecPorttoUse OBJECT-TYPE
    SYNTAX  INTEGER {
        data(1),
        mgta(2),
        mgtb(3)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Specify whether the Tacacs should be performed over the
         data port or the management port."
    ::= { agTacacsConfig 38 }

agTacacsUserMapCurCfgTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF AgTacacsUserMapCurCfgTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table of tacacs+ user map current configuration."
    ::= { agTacacsConfig 39 }

agTacacsUserMapCurCfgTableEntry OBJECT-TYPE
    SYNTAX  AgTacacsUserMapCurCfgTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A row in the tacacs+ user mapping table."
    INDEX  { agTacacsUserMapCurCfgUId }
    ::= { agTacacsUserMapCurCfgTable 1 }

AgTacacsUserMapCurCfgTableEntry ::= SEQUENCE {
    agTacacsUserMapCurCfgUId       Integer32,
    agTacacsUserMapCurCfgMapping   INTEGER
    }

agTacacsUserMapCurCfgUId OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The current config remote privilege identifier.
         The identifier value corresponds to the remote privilege."
    ::= { agTacacsUserMapCurCfgTableEntry 1 }

agTacacsUserMapCurCfgMapping OBJECT-TYPE
    SYNTAX  INTEGER {
        none(0),
        user(1),
        oper(2),
        admin(3)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Current Tacacs+ user privilege mappings.
         The correspondence between the local privilege and the remote privilege is:
          - The remote privilege is the privilege identifier value
          - The local privilege is the mapped value(user, oper, admin)
         Example: For the remote privilege 15, we have the index 16:
         agTacacsUserMapCurCfgUId.16 = 15."
    ::= { agTacacsUserMapCurCfgTableEntry 2 }

agTacacsUserMapNewCfgTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF AgTacacsUserMapNewCfgTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table of tacacs+ user map new configuration."
    ::= { agTacacsConfig 40 }

tacNewCfgDirectedRequest OBJECT-TYPE
    SYNTAX  INTEGER {
        disabled(1),
        restricted(2),
        no-truncate(3)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable/Disable tacacs directed request."
    ::= { agTacacsConfig 41 }

tacCurCfgDirectedRequest OBJECT-TYPE
    SYNTAX  INTEGER {
        disabled(1),
        restricted(2),
        no-truncate(3)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The current tacacs directed request state."
    ::= { agTacacsConfig 42 }

agTacacsUserMapNewCfgTableEntry OBJECT-TYPE
    SYNTAX  AgTacacsUserMapNewCfgTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A row in the tacacs+ user mapping table."
    INDEX  { agTacacsUserMapNewCfgUId }
    ::= { agTacacsUserMapNewCfgTable 1 }

AgTacacsUserMapNewCfgTableEntry ::= SEQUENCE {
    agTacacsUserMapNewCfgUId       Integer32,
    agTacacsUserMapNewCfgMapping   INTEGER
    }

agTacacsUserMapNewCfgUId OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The new config remote privilege identifier.
         The identifier value corresponds to the remote privilege."
    ::= { agTacacsUserMapNewCfgTableEntry 1 }

agTacacsUserMapNewCfgMapping OBJECT-TYPE
    SYNTAX  INTEGER {
        none(0),
        user(1),
        oper(2),
        admin(3)
        }
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "Set new Tacacs+ user privilege mappings.
         The correspondence between the local privilege and the remote privilege is:
          - The remote privilege is the privilege identifier value
          - The local privilege is the mapped value(user, oper, admin)
         Example: For the remote privilege 15, we have the index 16:
         agTacacsUserMapNewCfgUId.16 = 15."
    ::= { agTacacsUserMapNewCfgTableEntry 2 }
tacCurCfgAttempts OBJECT-TYPE
    SYNTAX  INTEGER  (1..10)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Number of login attempts to the TACACS+ server."
    ::= { agTacacsConfig 43 }

tacNewCfgAttempts OBJECT-TYPE
    SYNTAX  INTEGER  (1..10)
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Number of login attempts to the TACACS+ server."
    ::= { agTacacsConfig 44 }

tacCurBypassEnable OBJECT-TYPE
    SYNTAX      INTEGER {
        disable(0),
        enable (1)
    }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Status of the enable bypass.If the status of this object
         is enabled, user authenticated via TACACS+ with admin
         previllage is granted enable previllage access.If disabled,
         admin users will be provided with enable previllage access
         based on enable password configured."
    DEFVAL      { enable }
    ::= { agTacacsConfig 45 }

tacNewBypassEnable OBJECT-TYPE
    SYNTAX      INTEGER {
        disable(0),
        enable (1)
    }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Status of the enable bypass.If the status of this object
         is enabled, user authenticated via TACACS+ with admin
         previllage is granted enable previllage access.If disabled,
         admin users will be provided with enable previllage access
         based on enable password configured."
    DEFVAL      { enable }
    ::= { agTacacsConfig 46 }

tacCurCfgEnableAccounting OBJECT-TYPE
    SYNTAX    INTEGER {
        enable(1),
        disable(0)
    }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        " Current TACACS+ accounting state."
    ::= { agTacacsConfig 47 }

tacNewCfgEnableAccounting OBJECT-TYPE
    SYNTAX INTEGER  {
        enable(1),
        disable(0)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        " Enable/Disable TACACS+ accounting."
    ::= { agTacacsConfig 48 }

tacCurCfgSrcLoopIf OBJECT-TYPE
    SYNTAX  INTEGER 
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The index of the loopback interface that should be used
         for the source IP of the Tacacs+ message; 0 means that
         no loopback interface is used as the source of the Tacacs+ message."
    ::= { agTacacsConfig 49 }

tacNewCfgSrcLoopIf OBJECT-TYPE
    SYNTAX INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The index of the loopback interface that should be used
         for the source IP of the Tacacs+ message; 0 means that
         no loopback interface is used as the source of the Tacacs+ message."
    ::= { agTacacsConfig 50 }


-- Multiple Management network MIB objects
agMgmtNetTableMaxSize OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The maximum number of entries in the Management
         Network Table."
    ::= { agMgmtNetConfig 1 }

agCurCfgMgmtNetTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF AgCurCfgMgmtNetEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table for Management Network definitions
         in the current configuration block."
    ::= { agMgmtNetConfig 2 }

agCurCfgMgmtNetEntry OBJECT-TYPE
    SYNTAX  AgCurCfgMgmtNetEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A row in the management network definition table."
    INDEX   {  agCurCfgMgmtNetIndex }
    ::= { agCurCfgMgmtNetTable 1 }

AgCurCfgMgmtNetEntry ::= SEQUENCE {
    agCurCfgMgmtNetIndex  	Integer32,
    agCurCfgMgmtNetSubnet       DisplayString,
    agCurCfgMgmtNetMask         DisplayString
    }

agCurCfgMgmtNetIndex OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The index of the Management Network Definition table."
    ::= { agCurCfgMgmtNetEntry 1 }

agCurCfgMgmtNetSubnet OBJECT-TYPE
    SYNTAX  DisplayString
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The Management Network Address in the current configuration
         block."
    ::= { agCurCfgMgmtNetEntry 2 }

agCurCfgMgmtNetMask OBJECT-TYPE
    SYNTAX  DisplayString
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The Management Network Mask/Prefix Length in the current configuration
         block."
    ::= { agCurCfgMgmtNetEntry 3 }

agNewCfgMgmtNetTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF AgNewCfgMgmtNetEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table for Management Network definitions
         in the new configuration block."
    ::= { agMgmtNetConfig 3 }

agNewCfgMgmtNetEntry OBJECT-TYPE
    SYNTAX  AgNewCfgMgmtNetEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A row in the management network definition table."
    INDEX   {  agNewCfgMgmtNetIndex }
    ::= { agNewCfgMgmtNetTable 1 }

AgNewCfgMgmtNetEntry ::= SEQUENCE {
    agNewCfgMgmtNetIndex  	Integer32,
    agNewCfgMgmtNetSubnet       DisplayString,
    agNewCfgMgmtNetMask         DisplayString,
    agNewCfgMgmtNetDelete       INTEGER
    }

agNewCfgMgmtNetIndex OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The index of the Management Network Definition table."
    ::= { agNewCfgMgmtNetEntry 1 }

agNewCfgMgmtNetSubnet OBJECT-TYPE
    SYNTAX  DisplayString
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "The Management Network Address in the new configuration
         block."
    ::= { agNewCfgMgmtNetEntry 2 }

agNewCfgMgmtNetMask OBJECT-TYPE
    SYNTAX  DisplayString
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "The Management Network Mask/Prefix length in the new configuration
         block."
    ::= { agNewCfgMgmtNetEntry 3 }

agNewCfgMgmtNetDelete OBJECT-TYPE
    SYNTAX  INTEGER {
        other(1),
        delete(2)
        }
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "By setting the value to delete(2), the entire row is deleted."
    ::= { agNewCfgMgmtNetEntry 4 }

agMgmtNetClear OBJECT-TYPE
    SYNTAX  INTEGER {
        other(1),
        clear(2)
        }
    MAX-ACCESS  read-write
    STATUS current
    DESCRIPTION
        "By setting the value to delete(2), the entire table is cleared."
    ::= { agMgmtNetConfig 4 }



-- Scheduled Reboot Group

agCfgBootResetParameters OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..255))
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "String formatated as 'weekday hour minute'
         where
         - weekday is none(0),sunday(1),monday(2),
         tuesday(3),wednesday(4),thursday(5),friday(6),
         saturday(7)
         - hour is the hour in 24-hour format for reboot
         - minutes are the minutes [00] for reboot"

     ::= { agBoot 1 }

agCfgBootReset OBJECT-TYPE
    SYNTAX  INTEGER {
        none(1),
        cancel(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Cancel pending switch reset."
    ::= { agBoot 4 }

agCfgBootNxtResetTime OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..255))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Display the next scheduled reboot time."
     ::= { agBoot 5 }

agCfgBootPendingReset OBJECT-TYPE
    SYNTAX INTEGER {
        idle(1),
        pending(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Shows if there is any pending reboot scheduled.
         You should cancel any pending reboot scheduled
         before setting another."
    ::= { agBoot 6 }





agAccessUserMaxUserID OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The maximum number of User IDs."
    ::= { agAccess 1 }

agAccessCurStrongPassword OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(0)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Status of strong password."
    ::= { agAccess 4 }

agAccessNewStrongPassword OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(0)
        }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Setting this value to enabled(1) enables strong
         password support, while disabled(0) disables it."
    ::= { agAccess 5 }

agAccessCurStrongPassValidity OBJECT-TYPE
    SYNTAX  INTEGER (1..365)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Password validity in days."
    ::= { agAccess 6 }

agAccessNewStrongPassValidity OBJECT-TYPE
    SYNTAX  INTEGER (1..365)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Get or set password validity in days."
    ::= { agAccess 7 }

agAccessCurStrongPassWarning OBJECT-TYPE
    SYNTAX  INTEGER (1..365)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Warning days before password expires."
    ::= { agAccess 8 }

agAccessNewStrongPassWarning OBJECT-TYPE
    SYNTAX  INTEGER (1..365)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Get or set warning days before password expires."
    ::= { agAccess 9 }

agAccessCurStrongPassFailLog OBJECT-TYPE
    SYNTAX  INTEGER (1..255)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Number of failed logins that trigger
         security notifications."
    ::= { agAccess 10 }

agAccessNewStrongPassFailLog OBJECT-TYPE
    SYNTAX  INTEGER (1..255)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Get or set number of failed logins that trigger
         security notifications."
    ::= { agAccess 11 }

agAccessCurDefaultAdmin OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(0)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Get default admin account state. (1) indicates enabled and (0) indicates
          disabled (0). Default it is enabled."
    ::= { agAccess 12 }

agAccessNewDefaultAdmin OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(0)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Setting this value to enabled (1) will enable the default admin account while
          disabled (0) will disable the default admin account. Default it is enabled."
    ::= { agAccess 13 }

agAccessCurStrongPassLockout OBJECT-TYPE
    SYNTAX  INTEGER  {
        enabled(1),
        disabled(0)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Status of Lockout"
    ::= { agAccess 14 }

agAccessNewStrongPassLockout OBJECT-TYPE
    SYNTAX  INTEGER  {
        enabled(1),
        disabled(0)
        }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Setting this value to enabled (1) enables account locking after trying for failed login
          attempts. While disabled (0) disables account locking."
    ::= { agAccess 15 }

agAccessCurStrongPassAttemptsMaxFail OBJECT-TYPE
    SYNTAX  INTEGER (1..10)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The max number of failed logins before disabling account. Default value is 6"
    ::= { agAccess 16 }

agAccessNewStrongPassAttemptsMaxFail OBJECT-TYPE
    SYNTAX  INTEGER (1..10)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Sets Max number of failed logins before disabling account. Default value is 6"
    ::= { agAccess 17 }



agAccessUserCurCfgTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF AgAccessUserCurCfgTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table of Access user configuration."
    ::= { agAccess 2 }

agAccessUserCurCfgTableEntry OBJECT-TYPE
    SYNTAX  AgAccessUserCurCfgTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A row in the Access user configuration table."
    INDEX  { agAccessUserCurCfgUId }
    ::= { agAccessUserCurCfgTable 1 }

AgAccessUserCurCfgTableEntry ::= SEQUENCE {
    agAccessUserCurCfgUId 	Integer32,
    agAccessUserCurCos 		INTEGER,
    agAccessUserCurCfgName 	DisplayString,
    agAccessUserCurCfgPswd 	DisplayString,
    agAccessUserCurCfgState	INTEGER
    }

agAccessUserCurCfgUId OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The User identifier."
    ::= { agAccessUserCurCfgTableEntry 1 }

agAccessUserCurCos OBJECT-TYPE
    SYNTAX  INTEGER {
        user(0),
        oper(3),
        admin(6)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The user class of service."
    ::= { agAccessUserCurCfgTableEntry 2 }

agAccessUserCurCfgName OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..64))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The user name. Please note, the max length is 8 in stacking mode."
    ::= { agAccessUserCurCfgTableEntry 3 }

agAccessUserCurCfgPswd OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..128))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The character string representing the user password."
    ::= { agAccessUserCurCfgTableEntry 4 }


agAccessUserCurCfgState OBJECT-TYPE
    SYNTAX  INTEGER  {
	enabled(2),
	disabled(3)
	}
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "User validation (enabled or disabled) in current
         configuration block."
    ::= { agAccessUserCurCfgTableEntry 6 }

agAccessUserNewCfgTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF AgAccessUserNewCfgTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table of Access user configuration."
    ::= { agAccess 3 }

agAccessUserNewCfgTableEntry OBJECT-TYPE
    SYNTAX  AgAccessUserNewCfgTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A row in the Access user configuration table."
    INDEX  { agAccessUserNewCfgUId }
    ::= { agAccessUserNewCfgTable 1 }

AgAccessUserNewCfgTableEntry ::= SEQUENCE {
    agAccessUserNewCfgUId 	Integer32,
    agAccessUserNewCos  	INTEGER,
    agAccessUserNewCfgName   	DisplayString,
    agAccessUserNewCfgPswd 	DisplayString,
    agAccessUserNewCfgState	INTEGER,
    agAccessUserNewCfgDelete    INTEGER
    }

agAccessUserNewCfgUId OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The User identifier."
    ::= { agAccessUserNewCfgTableEntry 1 }

agAccessUserNewCos OBJECT-TYPE
    SYNTAX  INTEGER {
        user(0),
        oper(3),
        admin(6)
        }
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "The user class of service."
    ::= { agAccessUserNewCfgTableEntry 2 }

agAccessUserNewCfgName OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..64))
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "The user name. Please note, the max length is 8 in stacking mode."
    ::= { agAccessUserNewCfgTableEntry 3 }

agAccessUserNewCfgPswd OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..128))
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "The character string representing the user password."
    ::= { agAccessUserNewCfgTableEntry 4 }


agAccessUserNewCfgState OBJECT-TYPE
    SYNTAX  INTEGER  {
	enabled(2),
	disabled(3)
	}
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "User validation (enabled or disabled) in new
         configuration block."
    ::= { agAccessUserNewCfgTableEntry 7 }

agAccessUserNewCfgDelete OBJECT-TYPE
    SYNTAX  INTEGER  {
        other(1),
        delete(2)
        }
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "This is an action object to create or delete a User.
         other(1) is returned always when read.
         The following values are writable: delete(2)...to delete a User"
    ::= { agAccessUserNewCfgTableEntry 8 }

-- LDAP Configuration

ldapCurCfgPrimaryIpAddr OBJECT-TYPE
    SYNTAX  IpAddress
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The IP address of the Primary LDAP server."
    ::= { agLdapConfig 1 }

ldapNewCfgPrimaryIpAddr OBJECT-TYPE
    SYNTAX  IpAddress
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The IP address of the Primary LDAP server."
    ::= { agLdapConfig 2 }

ldapCurCfgSecondaryIpAddr OBJECT-TYPE
    SYNTAX  IpAddress
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The IP address of the Secondary LDAP server."
    ::= { agLdapConfig 3 }

ldapNewCfgSecondaryIpAddr OBJECT-TYPE
    SYNTAX  IpAddress
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The IP address of the Secondary LDAP server."
    ::= { agLdapConfig 4 }

ldapCurCfgPort OBJECT-TYPE
    SYNTAX  INTEGER  (1..65000)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Specify the LDAP port number."
    ::= { agLdapConfig 5 }

ldapNewCfgPort OBJECT-TYPE
    SYNTAX  INTEGER  (1..65000)
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Specify the LDAP port number."
    ::= { agLdapConfig 6 }

ldapCurCfgRetries OBJECT-TYPE
    SYNTAX  INTEGER  (1..3)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Number of retries to the LDAP server."
    ::= { agLdapConfig 7 }

ldapNewCfgRetries OBJECT-TYPE
    SYNTAX  INTEGER  (1..3)
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Number of retries to the LDAP server."
    ::= { agLdapConfig 8 }

ldapCurCfgTimeout OBJECT-TYPE
    SYNTAX  INTEGER  (4..15)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The maximum number of seconds before resending authentication
         to LDAP server."
    ::= { agLdapConfig 9 }

ldapNewCfgTimeout OBJECT-TYPE
    SYNTAX  INTEGER  (4..15)
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The maximum number of seconds before resending authentication
         to LDAP server."
    ::= { agLdapConfig 10 }

ldapCurCfgDomain OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..127))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The LDAP domain name."
    ::= { agLdapConfig 11 }

ldapNewCfgDomain OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..127))
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The LDAP domain name."
    ::= { agLdapConfig 12 }

ldapCurCfgBackdoor OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(0)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable LDAP backdoor for telnet/ssh/http/https."
    ::= { agLdapConfig 13 }

ldapNewCfgBackdoor OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(0)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable or disable LDAP backdoor for telnet/ssh/http/https."
    ::= { agLdapConfig 14 }

ldapCurCfgState OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(0)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable LDAP authentication."
    ::= { agLdapConfig 15 }

ldapNewCfgState OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(0)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable or disable LDAP authentication."
    ::= { agLdapConfig 16 }

ldapCurCfgPorttoUse OBJECT-TYPE
    SYNTAX  INTEGER {
        data(1),
        mgta(2),
        mgtb(3)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Specify whether the LDAP should be performed over the
         data port or the management port."
    ::= { agLdapConfig 17 }

ldapNewCfgPorttoUse OBJECT-TYPE
    SYNTAX  INTEGER {
        data(1),
        mgta(2),
        mgtb(3)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Specify whether the LDAP should be performed over the
         data port or the management port."
    ::= { agLdapConfig 18 }

ldapCurCfgSecPorttoUse OBJECT-TYPE
    SYNTAX  INTEGER {
        data(1),
        mgta(2),
        mgtb(3)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Specify whether the LDAP should be performed over the
         data port or the management port."
    ::= { agLdapConfig 19 }

ldapNewCfgSecPorttoUse OBJECT-TYPE
    SYNTAX  INTEGER {
        data(1),
        mgta(2),
        mgtb(3)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Specify whether the LDAP should be performed over the
         data port or the management port."
    ::= { agLdapConfig 20 }

-- sFlow Group
sflowCurCfgServerAddress OBJECT-TYPE
    SYNTAX  IpAddress
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The IP address of the sFlow server."
    ::= { agsFlowConfig 1 }

sflowNewCfgServerAddress OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..46))
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The IP address of the sFlow server."
    ::= { agsFlowConfig 2 }

sflowCurCfgServerPort OBJECT-TYPE
    SYNTAX  INTEGER  (1..65000)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Specify the sFlow server port number."
    ::= { agsFlowConfig 3 }

sflowNewCfgServerPort OBJECT-TYPE
    SYNTAX  INTEGER  (1..65000)
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Specify the sFlow server port number."
    ::= { agsFlowConfig 4 }

sflowCurCfgState OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(0)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable sFlow."
    ::= { agsFlowConfig 5 }

sflowNewCfgState OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(0)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable or disable sFlow"
    ::= { agsFlowConfig 6 }

sflowCurPortCfgTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF SflowCurPortCfgTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table of sFlow port configuration."
    ::= { agsFlowConfig 7 }

sflowCurPortCfgTableEntry OBJECT-TYPE
    SYNTAX  SflowCurPortCfgTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A row in the sFlow port configuration table."
    INDEX  { sflowCurPortCfgTableId }
    ::= { sflowCurPortCfgTable 1 }

SflowCurPortCfgTableEntry ::= SEQUENCE {
    sflowCurPortCfgTableId 	    PortNumber,
    sflowCurPortSampling            INTEGER,
    sflowCurPortPolling             INTEGER
    }

sflowCurPortCfgTableId OBJECT-TYPE
    SYNTAX PortNumber
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
          "sFlow port number."
    ::= { sflowCurPortCfgTableEntry 1 }
sflowCurPortSampling OBJECT-TYPE
    SYNTAX       INTEGER (256..65536)
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The current sFlow port sampling rate."
    ::= { sflowCurPortCfgTableEntry 2 }
sflowCurPortPolling OBJECT-TYPE
    SYNTAX       INTEGER (5..60)
    MAX-ACCESS       read-only
    STATUS       current
    DESCRIPTION
        "The current sFlow port polling interval."
    ::= { sflowCurPortCfgTableEntry 3 }

sflowNewPortCfgTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF SflowNewPortCfgTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table of sFlow port configuration."
    ::= { agsFlowConfig 8 }

sflowNewPortCfgTableEntry OBJECT-TYPE
    SYNTAX  SflowNewPortCfgTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A row in the sFlow port configuration table."
    INDEX  { sflowNewPortCfgTableId }
    ::= { sflowNewPortCfgTable 1 }

SflowNewPortCfgTableEntry ::= SEQUENCE {
    sflowNewPortCfgTableId 	    PortNumber,
    sflowNewPortSampling    	    INTEGER,
    sflowNewPortPolling             INTEGER
    }

sflowNewPortCfgTableId OBJECT-TYPE
    SYNTAX PortNumber
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
          " sFlow port number."
    ::= { sflowNewPortCfgTableEntry 1 }
sflowNewPortSampling OBJECT-TYPE
    SYNTAX       INTEGER (1..16777215)
    MAX-ACCESS    read-write
    STATUS       current
    DESCRIPTION
        "The new sFlow port sampling rate.
        Valid range: 1-16777215| 0 for disable"
    ::= { sflowNewPortCfgTableEntry 2 }
sflowNewPortPolling OBJECT-TYPE
    SYNTAX       INTEGER (5..60)
    MAX-ACCESS       read-write
    STATUS       current
    DESCRIPTION
        "The new sFlow port polling interval.
	Valid range: 5-60| 0 for disable"
    ::= { sflowNewPortCfgTableEntry 3 }

sflowCurCfgMgmtPort OBJECT-TYPE
    SYNTAX  INTEGER {
        data(1),
        mgta(2),
        mgtb(3)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The port that the sFlow server is connected to"
    ::= { agsFlowConfig 9 }

sflowNewCfgMgmtPort OBJECT-TYPE
    SYNTAX  INTEGER {
        data(1),
        mgta(2),
        mgtb(3)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Chose the port that the sFlow server will connect to"
    ::= { agsFlowConfig 10 }






-- Statistics Group

-- Packet Statistics Group
-- This group represents Packet Statistics information

pktStatsAllocs OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Total number of packet allocations from the packet buffer pool by
         the TCP/IP protocol stack."
    ::= { pktStats 1 }

pktStatsFrees OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Total number of times the packet buffers are freed(released) to the
         packet buffer pool by the TCP/IP protocol stack."
    ::= { pktStats 2 }

pktStatsAllocFails OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Total number of packet allocation failures from the packet buffer
         pool by the TCP/IP protocol stack."
    ::= { pktStats 3}

pktStatsMediums OBJECT-TYPE
    SYNTAX  Gauge32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Total number of packet allocations with size greater than 128 bytes
         and less than or equal to 1536 bytes from the packet buffer pool by
         the TCP/IP protocol stack."
    ::= { pktStats 4}

pktStatsJumbos OBJECT-TYPE
    SYNTAX  Gauge32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Total number of packet allocations with size larger than 1536 bytes
         from the packet buffer pool by the TCP/IP protocol stack."
    ::= { pktStats 5}

pktStatsSmalls OBJECT-TYPE
    SYNTAX  Gauge32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Total number of packet allocations with size less than or eqaul to
         128 bytes from the packet buffer pool by the TCP/IP protocol stack."
    ::= { pktStats 6}

pktStatsMediumsHiWatermark OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The highest number of packet allocations with size greater than
         128 bytes and less than or equal to 1536 bytes from the packet
         buffer pool by the TCP/IP protocol stack."
    ::= { pktStats 7}

pktStatsJumbosHiWatermark OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The highest number of packet allocations with size larger than
         1536 bytes from the packet buffer pool by the TCP/IP protocol stack."
    ::= { pktStats 8}

pktStatsSmallsHiWatermark OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The highest number of packet allocations with size less than or
         equal to 128 bytes from the packet buffer pool by the TCP/IP
         protocol stack."
    ::= { pktStats 9}


-- MP CPU Statisitics Group

mpCpuStatsUtil1Second OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The utilization of MP CPU over 1 second. It shows the percentage."
    ::= { mpCpuStats 1}

mpCpuStatsUtil4Seconds OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The utilization of MP CPU  over 4 seconds.
	 It shows the percentage."
    ::= { mpCpuStats 2}

mpCpuStatsUtil64Seconds OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The utilization of MP CPU over 64 seconds.
	 It shows the percentage."
    ::= { mpCpuStats 3}


-- Stats for per thread CPU utilization

cpuUtilProcessStatsTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF CpuUtilProcessStatsTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table of CPU utilization per process statistics."
    ::= { mpCpuStats 5 }

cpuUtilProcessStatsTableEntry OBJECT-TYPE
    SYNTAX  CpuUtilProcessStatsTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
	"A row in the CPU utilization stats per process table."
    INDEX    { processId }
    ::= { cpuUtilProcessStatsTable 1 }

CpuUtilProcessStatsTableEntry ::=
    SEQUENCE {
    processId	
		Integer32,
    processName
        DisplayString,
    cpuProcessUtil1Sec	
        DisplayString,
    cpuProcessUtil5Sec	
        DisplayString,
    cpuProcessUtil1Min
        DisplayString,
	cpuProcessUtil5Min
        DisplayString,
    processStatus
        DisplayString
    }

processId OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The process ID."
    ::= { cpuUtilProcessStatsTableEntry 1 }

processName OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..32))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
         "Process Name."
    ::= { cpuUtilProcessStatsTableEntry 2 }

cpuProcessUtil1Sec OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..32))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The utilization of MP CPU over 1 second.
         It shows the percentage."
    ::= { cpuUtilProcessStatsTableEntry 3 }

cpuProcessUtil5Sec OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..32))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The utilization of MP CPU over 5 seconds.
         It shows the percentage."
    ::= { cpuUtilProcessStatsTableEntry 4 }

cpuProcessUtil1Min OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..32))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The utilization of MP CPU over 1 min.
         It shows the percentage."
    ::= { cpuUtilProcessStatsTableEntry 5 }

cpuProcessUtil5Min OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..32))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The utilization of MP CPU over 5 min.
         It shows the percentage."
    ::= { cpuUtilProcessStatsTableEntry 6 }

processStatus OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..32))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
         "Process Status"
    ::= { cpuUtilProcessStatsTableEntry 7 }

--
-- Port statistics table
--
portStatsTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF PortStatsTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table of port statistics."
    ::= { portStats 1 }

portStatsTableEntry OBJECT-TYPE
    SYNTAX  PortStatsTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A row in the port stats table."
    INDEX   { portStatsIndx }
    ::= { portStatsTable 1 }

PortStatsTableEntry ::=
    SEQUENCE {
	portStatsIndx
	    PortNumber,
	portStatsPhyIfInOctets
	    Counter32,
	portStatsPhyIfInUcastPkts
	    Counter32,
	portStatsPhyIfInNUcastPkts
	    Counter32,
	portStatsPhyIfInDiscards
	    Counter32,
	portStatsPhyIfInErrors
	    Counter32,
	portStatsPhyIfInUnknownProtos
	    Counter32,
	portStatsPhyIfOutOctets
	    Counter32,
	portStatsPhyIfOutUcastPkts
	    Counter32,
	portStatsPhyIfOutNUcastPkts
	    Counter32,
	portStatsPhyIfOutDiscards
	    Counter32,
	portStatsPhyIfOutErrors
	    Counter32,
	portStatsPhyIfOutQLen
	    Gauge32,
        portStatsPhyIfInBroadcastPkts
            Counter32,
        portStatsPhyIfOutBroadcastPkts
            Counter32,
        portStatsPhyIfInMulticastPkts
            Counter32,
        portStatsPhyIfOutMulticastPkts
            Counter32,
	portStatsClear
            INTEGER
        ,portStatsLinkStateChange
            Counter32
        ,portStatsPhyIfInFctlPkts
            Counter32
        ,portStatsPhyIfOutFctlPkts
            Counter32
        ,portStatsPhyIfInFctlPktsRate
            Counter32
        ,portStatsPhyIfOutFctlPktsRate
            Counter32
        ,portStatsDot1PortInFrames
            Counter32
        ,portStatsDot1PortOutFrames
            Counter32
        ,portStatsDot1PortInDiscards
            Counter32
        ,portStatsDot1TpLearnedEntryDiscards
            Counter32
        ,portStatsDot1StpPortForwardTransitions
            Counter32
    }

tcpControlBlocksTable OBJECT-TYPE
   SYNTAX SEQUENCE OF TcpControlBlocksTableEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
      "All TCP allocated control blocks "
   ::= { mpTcbStats 1 }

tcpControlBlocksTableEntry OBJECT-TYPE
   SYNTAX TcpControlBlocksTableEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
     "A row in the TCP control blocks table. "
  INDEX { tcpControlBlocksIndx }
  ::= { tcpControlBlocksTable 1 }

TcpControlBlocksTableEntry ::=
   SEQUENCE {
     tcpControlBlocksIndx
         Integer32,
     destAddr
        DisplayString,
    remotePort
         Gauge32,
    sourceAddr
         DisplayString,
   localPort
         Gauge32,
   portType
         DisplayString,
   portState
         DisplayString,
   state
         DisplayString
}

tcpControlBlocksIndx OBJECT-TYPE
   SYNTAX Integer32
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
       "The TCP blocks index."
  ::= { tcpControlBlocksTableEntry 1 }

  destAddr OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "The TCP block destination address."
    ::= { tcpControlBlocksTableEntry 2 }

  remotePort OBJECT-TYPE
    SYNTAX Gauge32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Tcp informations concerning the remote port"
    ::= { tcpControlBlocksTableEntry 3}

  sourceAddr OBJECT-TYPE
    SYNTAX DisplayString 
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "IP address of the source of the Tcp block"
    ::= { tcpControlBlocksTableEntry 4}

  localPort OBJECT-TYPE
    SYNTAX Gauge32
    MAX-ACCESS read-only
    STATUS current
  DESCRIPTION
      "Tcp informations concerning the local  port"
    ::= { tcpControlBlocksTableEntry 5}


  portType OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
     "The type of the local port"
    ::= { tcpControlBlocksTableEntry 7 }

  portState OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
     " The state of the local port"
    ::= { tcpControlBlocksTableEntry 8 }


  state OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "The state of the Tcp"
    ::= { tcpControlBlocksTableEntry 6 }


  tcpMGMTControlBlocksTable OBJECT-TYPE
     SYNTAX SEQUENCE OF TcpMGMTTableEntry
     MAX-ACCESS not-accessible
     STATUS current
     DESCRIPTION
        "All TCP allocated control blocks on MGMT port"
     ::= { mpTcbStats 2 }

  tcpMGMTTableEntry OBJECT-TYPE
     SYNTAX TcpMGMTTableEntry
     MAX-ACCESS not-accessible
     STATUS current
     DESCRIPTION
     " A row in the TCP on MGMT port table. "
     INDEX { tcpMGMTIndx }
     ::= { tcpMGMTControlBlocksTable 1 }

  TcpMGMTTableEntry ::=
     SEQUENCE {
     tcpMGMTIndx
         Integer32,
     recvQ
         Integer32,
     sentQ
         Integer32,
     localAddress
         DisplayString,
     foreignAddress
         DisplayString,
     stateMgmt
         DisplayString
  }

  tcpMGMTIndx OBJECT-TYPE
     SYNTAX Integer32
     MAX-ACCESS read-only
     STATUS  current
     DESCRIPTION
       " Index in the tcpMGMTControlBlocksTable table."
     ::= { tcpMGMTTableEntry 1 }

  recvQ OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
     "The size of the received TCP queue."
    ::= { tcpMGMTTableEntry 2 }

  sentQ OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
     "The size of the sent TCP blocks queue."
    ::= { tcpMGMTTableEntry 3 }

localAddress OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
     "The local address for the TCP."
    ::= { tcpMGMTTableEntry 4 }

  foreignAddress OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
     "The remote address for the TCP."
    ::= { tcpMGMTTableEntry 5  }

  stateMgmt OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
     "The port's state."
    ::= { tcpMGMTTableEntry 6 }



  udpControlBlocksTable OBJECT-TYPE
     SYNTAX SEQUENCE OF UdpControlBlocksTableEntry
     MAX-ACCESS not-accessible
     STATUS current
     DESCRIPTION
       "All UDP control blocks in use"
     ::= { mpUdpStats 1 }

udpControlBlocksTableEntry OBJECT-TYPE
     SYNTAX UdpControlBlocksTableEntry
     MAX-ACCESS not-accessible
     STATUS current
     DESCRIPTION
        "A row in the UDP control blocks table. "
     INDEX { udpMpLocalPort }
     ::= { udpControlBlocksTable 1 }

  UdpControlBlocksTableEntry ::=
    SEQUENCE {
       udpMpLocalPort
           Integer32,
      udpMpState
           DisplayString
  }

  udpMpLocalPort OBJECT-TYPE
     SYNTAX Integer32
     MAX-ACCESS read-only
     STATUS current
     DESCRIPTION
        "The current UDP local port."
     ::= { udpControlBlocksTableEntry 1 }

  udpMpState OBJECT-TYPE
     SYNTAX DisplayString
     MAX-ACCESS read-only
     STATUS current
     DESCRIPTION
        " The port's state. "
    ::= { udpControlBlocksTableEntry 2 }


  udpMGMTControlBlocksTable OBJECT-TYPE
     SYNTAX SEQUENCE OF UdpMGMTTableEntry
     MAX-ACCESS not-accessible
     STATUS current
     DESCRIPTION
        "All UDP control blocks allocated  on MGMT port"
     ::= { mpUdpStats 2 }

udpMGMTTableEntry OBJECT-TYPE
     SYNTAX UdpMGMTTableEntry
     MAX-ACCESS not-accessible
     STATUS current
     DESCRIPTION
       " A row in the UDP on MGMT port table. "
     INDEX { udpMGMTIndx }
     ::= { udpMGMTControlBlocksTable 1 }

  UdpMGMTTableEntry ::=
     SEQUENCE {
     udpMGMTIndx
         Integer32,
     recvQUdp
         Integer32,
     sentQUdp
         Integer32,
     localAddressUdp
         DisplayString,
     foreignAddressUdp
         DisplayString,
     stateMgmtUdp
         DisplayString
  }

  udpMGMTIndx OBJECT-TYPE
     SYNTAX Integer32
     MAX-ACCESS read-only
     STATUS  current
     DESCRIPTION
       " Index in the udpMGMTControlBlocksTable table."
     ::= { udpMGMTTableEntry 1 }

  recvQUdp OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
     "The size of the received UDP queue."
    ::= { udpMGMTTableEntry 2 }

  sentQUdp OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
     "The size of the sent UDP blocks queue."
    ::= { udpMGMTTableEntry 3 }

localAddressUdp OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
     "The local address for the UDP."
    ::= { udpMGMTTableEntry 4 }

  foreignAddressUdp OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
     "The remote address for the UDP."
    ::= { udpMGMTTableEntry 5  }

  stateMgmtUdp OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
     "The port's state."
    ::= { udpMGMTTableEntry 6 }





portStatsIndx OBJECT-TYPE
    SYNTAX  PortNumber
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The port index."
    ::= { portStatsTableEntry 1 }

portStatsPhyIfInOctets OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
	    "The total number of octets received on the
	    interface, including framing characters."
    ::= { portStatsTableEntry 2 }

portStatsPhyIfInUcastPkts OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
	    "The number of subnetwork-unicast packets
	    delivered to a higher-layer protocol."
    ::= { portStatsTableEntry 3 }

portStatsPhyIfInNUcastPkts OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
	    "The number of non-unicast (i.e., subnetwork-
	    broadcast or subnetwork-multicast) packets
	    delivered to a higher-layer protocol."
    ::= { portStatsTableEntry 4 }

portStatsPhyIfInDiscards OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
	    "The number of inbound packets which were chosen
	    to be discarded even though no errors had been
	    detected to prevent their being deliverable to a
	    higher-layer protocol.  One possible reason for
	    discarding such a packet could be to free up
	    buffer space."
    ::= { portStatsTableEntry 5 }

portStatsPhyIfInErrors OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
	    "The number of inbound packets that contained
	    errors preventing them from being deliverable to a
	    higher-layer protocol."
    ::= { portStatsTableEntry 6 }

portStatsPhyIfInUnknownProtos OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
	    "The number of packets received via the interface
	    which were discarded because of an unknown or
	    unsupported protocol."
    ::= { portStatsTableEntry 7 }

portStatsPhyIfOutOctets OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
	    "The total number of octets transmitted out of the
	    interface, including framing characters."
    ::= { portStatsTableEntry 8 }

portStatsPhyIfOutUcastPkts OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
	    "The total number of packets that higher-level
	    protocols requested be transmitted to a
	    subnetwork-unicast address, including those that
	    were discarded or not sent."
    ::= { portStatsTableEntry 9 }

portStatsPhyIfOutNUcastPkts OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
	    "The total number of packets that higher-level
	    protocols requested be transmitted to a non-
	    unicast (i.e., a subnetwork-broadcast or
	    subnetwork-multicast) address, including those
	    that were discarded or not sent."
    ::= { portStatsTableEntry 10 }

portStatsPhyIfOutDiscards OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
	    "The number of outbound packets which were chosen
	    to be discarded even though no errors had been
	    detected to prevent their being transmitted.  One
	    possible reason for discarding such a packet could
	    be to free up buffer space."
    ::= { portStatsTableEntry 11 }

portStatsPhyIfOutErrors OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
	    "The number of outbound packets that could not be
	    transmitted because of errors."
    ::= { portStatsTableEntry 12 }

portStatsPhyIfOutQLen OBJECT-TYPE
    SYNTAX  Gauge32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
	    "The length of the output packet queue (in
	    packets)."
    ::= { portStatsTableEntry 13 }

portStatsPhyIfInBroadcastPkts OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
            "The number of packets, delivered by this sub-layer to
            a higher (sub-)layer, which were addressed to a
            broadcast address at this sub-layer."
    ::= { portStatsTableEntry 14 }

portStatsPhyIfOutBroadcastPkts OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
	    "The total number of packets that higher-level
            protocols requested be transmitted, and which were
            addressed to a broadcast address at this sub-layer,
            including those that were discarded or not sent."
    ::= { portStatsTableEntry 15 }

portStatsPhyIfInMulticastPkts OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
            "The number of packets, delivered by this sub-layer to
            a higher (sub-)layer, which were addressed to a
            multicast address at this sub-layer."
    ::= { portStatsTableEntry 17 }

portStatsPhyIfOutMulticastPkts OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
            "The total number of packets that higher-level
            protocols requested be transmitted, and which were
            addressed to a multicast address at this sub-layer,
            including those that were discarded or not sent."
    ::= { portStatsTableEntry 18 }

portStatsClear OBJECT-TYPE
    SYNTAX  INTEGER {
        ok(1),
        clear(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
            "Setting this value to clear(2) clears the stats for this port."
    ::= { portStatsTableEntry 16 }


portStatsLinkStateChange OBJECT-TYPE
    SYNTAX           Counter32
    MAX-ACCESS       read-only
    STATUS           current
    DESCRIPTION
            "Number of link state changes."
    ::= { portStatsTableEntry 20 }

portStatsPhyIfInFctlPkts OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
            "The number of inbound flow control packets."
    ::= { portStatsTableEntry 21 }

portStatsPhyIfOutFctlPkts OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
            "The number of outbound flow control packets."
    ::= { portStatsTableEntry 22 }

portStatsPhyIfInFctlPktsRate OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
            "The number of inbound flow control packets per second."
    ::= { portStatsTableEntry 23 }

portStatsPhyIfOutFctlPktsRate OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
            "The number of outbound flow control packets per second."
    ::= { portStatsTableEntry 24 }


portStatsDot1PortInFrames OBJECT-TYPE                             
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
            "The number of IN frames per port."
    ::= { portStatsTableEntry 31 }

portStatsDot1PortOutFrames OBJECT-TYPE                             
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
            "The number of OUT frames per port."
    ::= { portStatsTableEntry 32 }

portStatsDot1PortInDiscards OBJECT-TYPE                             
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
            "The number of IN packets discarded per port."
    ::= { portStatsTableEntry 33 }

portStatsDot1TpLearnedEntryDiscards OBJECT-TYPE                             
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
            "The number of Dot1Tp learned entries discarded."
    ::= { portStatsTableEntry 34 }

portStatsDot1StpPortForwardTransitions OBJECT-TYPE                             
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
            "The number of transitions ...."
    ::= { portStatsTableEntry 35 }




portMgmtStatsTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF PortMgmtStatsTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table of port statistics."
    ::= { portStats 3 }

portMgmtStatsTableEntry OBJECT-TYPE
    SYNTAX  PortMgmtStatsTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A row in the management port stats table."
    INDEX   { portMgmtStatsIndx }
    ::= { portMgmtStatsTable 1 }

PortMgmtStatsTableEntry ::=
    SEQUENCE {
        portMgmtStatsIndx
            Integer32,
        portMgmtStatsRxBytes
            Counter32,
        portMgmtStatsTxBytes
            Counter32,
        portMgmtStatsRxpackets
            Counter32,
        portMgmtStatsTxpackets
            Counter32,
        portMgmtStatsRxErrors
            Counter32,
        portMgmtStatsTxErrors
            Counter32,
        portMgmtStatsRxDropped
            Counter32,
        portMgmtStatsTxDropped
            Counter32,
        portMgmtStatsRxOverruns
            Counter32,
        portMgmtStatsTxOverruns
            Counter32,
        portMgmtStatsRxFrame
            Counter32,
        portMgmtStatsTxCarrier
            Counter32,
        portMgmtStatsRxMulticast
            Counter32,
        portMgmtStatsTxCollisions
            Counter32
}

portMgmtStatsIndx OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The management port index."
    ::= { portMgmtStatsTableEntry 1 }

portMgmtStatsRxBytes OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
            "The total number of bytes received."
    ::= { portMgmtStatsTableEntry 2 }

portMgmtStatsTxBytes OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
            "The total number of bytes transmitted."
    ::= { portMgmtStatsTableEntry 3 }

portMgmtStatsRxpackets OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Total number of packet allocations from the packet buffer pool by
         the TCP/IP protocol stack."
    ::= { portMgmtStatsTableEntry 4 }

portMgmtStatsTxpackets OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Total number of packet allocations from the packet buffer pool by
         the TCP/IP protocol stack."
    ::= { portMgmtStatsTableEntry 5 }

portMgmtStatsRxErrors OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
            "The number of inbound packets that contained
             errors preventing them from being deliverable to a
             higher-layer protocol."
    ::= { portMgmtStatsTableEntry 6 }

portMgmtStatsTxErrors OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
            "The number of outbound packets that contained
             errors preventing them from being deliverable to a
             higher-layer protocol."
    ::= { portMgmtStatsTableEntry 7 }

portMgmtStatsRxDropped OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
            "The number of inbound packets that were dropped."
    ::= { portMgmtStatsTableEntry 8 }

portMgmtStatsTxDropped OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
            "The number of outbound packets that were dropped."
    ::= { portMgmtStatsTableEntry 9 }

portMgmtStatsRxOverruns OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
            "The number of data overruns over this link."
    ::= { portMgmtStatsTableEntry 10 }

portMgmtStatsTxOverruns OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
            "The number of data overruns over this link."
    ::= { portMgmtStatsTableEntry 11 }

portMgmtStatsRxFrame OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
            "The number of frames received on this link."
    ::= { portMgmtStatsTableEntry 12 }

portMgmtStatsTxCarrier OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The number of times that the carrier sense
         condition was lost or never asserted when
         attempting to transmit a frame on a this
         interface."
    ::= { portMgmtStatsTableEntry 13 }

portMgmtStatsRxMulticast OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
            "The total number of multicast packets received."
    ::= { portMgmtStatsTableEntry 14 }

portMgmtStatsTxCollisions OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
            "The number of collisions on this outbound segment."
    ::= { portMgmtStatsTableEntry 15 }


allportsStatsTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF AllportsStatsTableEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The table of all ports statistics."
    ::= { portStats 4 }

allportsStatsTableEntry OBJECT-TYPE
    SYNTAX      AllportsStatsTableEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A row in the table of all ports statistics."
    INDEX   { allportsStatsIndx }
    ::= { allportsStatsTable 1 }

AllportsStatsTableEntry ::=
    SEQUENCE {
        allportsStatsIndx                      PortNumber,
        allportsStatsDescr                     DisplayString,
        allportsStatsSpeed		       INTEGER,
        allportsStatsPhysAddress	       PhysAddress,
        allportsStatsAdminStatus               INTEGER,
        allportsStatsOperStatus                INTEGER,
        allportsStatsInOctets                  Counter32,
        allportsStatsOutOctets                 Counter32,
        allportsStatsInPkts                    Counter32,
        allportsStatsOutPkts                   Counter32,
        allportsStatsInUcast                   DisplayString,
        allportsStatsOutUcast                  DisplayString,
        allportsStatsInBcast                   DisplayString,
        allportsStatsOutBcast                  DisplayString,
        allportsStatsInMcast                   DisplayString,
        allportsStatsOutMcast                  DisplayString,
        allportsStatsInDiscards                Counter32,
        allportsStatsOutDiscards               Counter32,
        allportsStatsInErrors                  Counter32,
        allportsStatsOutErrors                 Counter32,
        allportsStatsInUnknownProtos           DisplayString,
        allportsStatsOutQLen                   DisplayString
        ,
        allportsStatsLinkStateChange           Counter32
        ,
        allportsStatsInOctetsRate              Counter32,
        allportsStatsOutOctetsRate             Counter32,
        allportsStatsInUcastRate               DisplayString,
        allportsStatsOutUcastRate              DisplayString,
        allportsStatsInBcastRate               DisplayString,
        allportsStatsOutBcastRate              DisplayString,
        allportsStatsInMcastRate               DisplayString,
        allportsStatsOutMcastRate              DisplayString,
        allportsStatsInDiscardsRate            Counter32,
        allportsStatsOutDiscardsRate           Counter32,
        allportsStatsInErrorsRate              Counter32,
        allportsStatsOutErrorsRate             Counter32
}

allportsStatsIndx OBJECT-TYPE
    SYNTAX           PortNumber
    MAX-ACCESS       read-only
    STATUS           current
    DESCRIPTION
            "The port number."
    ::= { allportsStatsTableEntry 1 }

allportsStatsDescr OBJECT-TYPE
    SYNTAX           DisplayString(SIZE(0..7))
    MAX-ACCESS       read-only
    STATUS           current
    DESCRIPTION
            "The port description."
    ::= { allportsStatsTableEntry 2 }

allportsStatsSpeed OBJECT-TYPE
    SYNTAX  INTEGER {
        mbs10(2),
        mbs100(3),
        mbs1000(4),
        any(5)
        ,
        mbs10000(6)
        }
    MAX-ACCESS       read-only
    STATUS           current
    DESCRIPTION
            "The current operational speed of the port."
    ::= { allportsStatsTableEntry 3 }

allportsStatsPhysAddress OBJECT-TYPE
    SYNTAX           PhysAddress
    MAX-ACCESS       read-only
    STATUS           current
    DESCRIPTION
            "The port MAC Address."
    ::= { allportsStatsTableEntry 4 }

allportsStatsAdminStatus OBJECT-TYPE
    SYNTAX  INTEGER {
        up(1),
        down(2),
        testing(3)
        }
    MAX-ACCESS       read-only
    STATUS           current
    DESCRIPTION
            "The port Admin state."
    ::= { allportsStatsTableEntry 5 }

allportsStatsOperStatus OBJECT-TYPE
    SYNTAX  INTEGER {
        up(1),
        down(2),
        testing(3)
        }
    MAX-ACCESS       read-only
    STATUS           current
    DESCRIPTION
            "The port Operational Status."
    ::= { allportsStatsTableEntry 6 }

allportsStatsInOctets OBJECT-TYPE
    SYNTAX           Counter32
    MAX-ACCESS       read-only
    STATUS           current
    DESCRIPTION
            "Octets In for port."
    ::= { allportsStatsTableEntry 7 }

allportsStatsOutOctets OBJECT-TYPE
    SYNTAX           Counter32
    MAX-ACCESS       read-only
    STATUS           current
    DESCRIPTION
            "Octets Out for port."
    ::= { allportsStatsTableEntry 8 }

allportsStatsInPkts OBJECT-TYPE
    SYNTAX           Counter32
    MAX-ACCESS       read-only
    STATUS           current
    DESCRIPTION
            "Packets In for port."
    ::= { allportsStatsTableEntry 9 }

allportsStatsOutPkts OBJECT-TYPE
    SYNTAX           Counter32
    MAX-ACCESS       read-only
    STATUS           current
    DESCRIPTION
            "Packets Out for port."
    ::= { allportsStatsTableEntry 10 }

allportsStatsInUcast OBJECT-TYPE
    SYNTAX           DisplayString(SIZE(0..20))
    MAX-ACCESS       read-only
    STATUS           current
    DESCRIPTION
            "Unicast Packets In for port."
    ::= { allportsStatsTableEntry 11 }

allportsStatsOutUcast OBJECT-TYPE
    SYNTAX           DisplayString(SIZE(0..20))
    MAX-ACCESS       read-only
    STATUS           current
    DESCRIPTION
            "Unicast Packets Out for port."
    ::= { allportsStatsTableEntry 12 }

allportsStatsInBcast OBJECT-TYPE
    SYNTAX           DisplayString(SIZE(0..20))
    MAX-ACCESS       read-only
    STATUS           current
    DESCRIPTION
            "Broadcasts Packets In for port."
    ::= { allportsStatsTableEntry 13 }

allportsStatsOutBcast OBJECT-TYPE
    SYNTAX           DisplayString(SIZE(0..20))
    MAX-ACCESS       read-only
    STATUS           current
    DESCRIPTION
            "Broadcasts Packets Out for port."
    ::= { allportsStatsTableEntry 14 }

allportsStatsInMcast OBJECT-TYPE
    SYNTAX           DisplayString(SIZE(0..20))
    MAX-ACCESS       read-only
    STATUS           current
    DESCRIPTION
            "Multicast Packets In for port."
    ::= { allportsStatsTableEntry 15 }

allportsStatsOutMcast OBJECT-TYPE
    SYNTAX           DisplayString(SIZE(0..20))
    MAX-ACCESS       read-only
    STATUS           current
    DESCRIPTION
            "Multicast Packets Out for port."
    ::= { allportsStatsTableEntry 16 }

allportsStatsInDiscards OBJECT-TYPE
    SYNTAX           Counter32
    MAX-ACCESS       read-only
    STATUS           current
    DESCRIPTION
            "Discarded Packets for port."
    ::= { allportsStatsTableEntry 17 }

allportsStatsOutDiscards OBJECT-TYPE
    SYNTAX           Counter32
    MAX-ACCESS       read-only
    STATUS           current
    DESCRIPTION
            "Outbound Packets for port."
    ::= { allportsStatsTableEntry 18 }

allportsStatsInErrors OBJECT-TYPE
    SYNTAX           Counter32
    MAX-ACCESS       read-only
    STATUS           current
    DESCRIPTION
            "Error Packets for port."
    ::= { allportsStatsTableEntry 19 }

allportsStatsOutErrors OBJECT-TYPE
    SYNTAX           Counter32
    MAX-ACCESS       read-only
    STATUS           current
    DESCRIPTION
            "Not sent packets due to error."
    ::= { allportsStatsTableEntry 20 }

allportsStatsInUnknownProtos OBJECT-TYPE
    SYNTAX           DisplayString(SIZE(0..20))
    MAX-ACCESS       read-only
    STATUS           current
    DESCRIPTION
            "Unknown protocol packets."
    ::= { allportsStatsTableEntry 21 }

allportsStatsOutQLen OBJECT-TYPE
    SYNTAX           DisplayString(SIZE(0..20))
    MAX-ACCESS       read-only
    STATUS           current
    DESCRIPTION
            "Outbound Packet Queue Length."
    ::= { allportsStatsTableEntry 22 }


allportsStatsLinkStateChange OBJECT-TYPE
    SYNTAX           Counter32
    MAX-ACCESS       read-only
    STATUS           current
    DESCRIPTION
            "Number of link state changes."
    ::= { allportsStatsTableEntry 26 }


allportsStatsInOctetsRate OBJECT-TYPE
    SYNTAX           Counter32
    MAX-ACCESS       read-only
    STATUS           current
    DESCRIPTION
            "Octets In rate for port."
    ::= { allportsStatsTableEntry 30 }

allportsStatsOutOctetsRate OBJECT-TYPE
    SYNTAX           Counter32
    MAX-ACCESS       read-only
    STATUS           current
    DESCRIPTION
            "Octets Out rate for port."
    ::= { allportsStatsTableEntry 31 }

allportsStatsInUcastRate OBJECT-TYPE
    SYNTAX           DisplayString(SIZE(0..20))
    MAX-ACCESS       read-only
    STATUS           current
    DESCRIPTION
            "Unicast Packets In rate for port."
    ::= { allportsStatsTableEntry 32 }

allportsStatsOutUcastRate OBJECT-TYPE
    SYNTAX           DisplayString(SIZE(0..20))
    MAX-ACCESS       read-only
    STATUS           current
    DESCRIPTION
            "Unicast Packets Out rate for port."
    ::= { allportsStatsTableEntry 33 }

allportsStatsInBcastRate OBJECT-TYPE
    SYNTAX           DisplayString(SIZE(0..20))
    MAX-ACCESS       read-only
    STATUS           current
    DESCRIPTION
            "Broadcasts Packets In rate for port."
    ::= { allportsStatsTableEntry 34 }

allportsStatsOutBcastRate OBJECT-TYPE
    SYNTAX           DisplayString(SIZE(0..20))
    MAX-ACCESS       read-only
    STATUS           current
    DESCRIPTION
            "Broadcasts Packets Out rate for port."
    ::= { allportsStatsTableEntry 35 }

allportsStatsInMcastRate OBJECT-TYPE
    SYNTAX           DisplayString(SIZE(0..20))
    MAX-ACCESS       read-only
    STATUS           current
    DESCRIPTION
            "Multicast Packets In rate for port."
    ::= { allportsStatsTableEntry 36 }

allportsStatsOutMcastRate OBJECT-TYPE
    SYNTAX           DisplayString(SIZE(0..20))
    MAX-ACCESS       read-only
    STATUS           current
    DESCRIPTION
            "Multicast Packets Out rate for port."
    ::= { allportsStatsTableEntry 37 }

allportsStatsInDiscardsRate OBJECT-TYPE
    SYNTAX           Counter32
    MAX-ACCESS       read-only
    STATUS           current
    DESCRIPTION
            "Discarded In Packets rate for port."
    ::= { allportsStatsTableEntry 38 }

allportsStatsOutDiscardsRate OBJECT-TYPE
    SYNTAX           Counter32
    MAX-ACCESS       read-only
    STATUS           current
    DESCRIPTION
            "Discarded Out Packets rate for port."
    ::= { allportsStatsTableEntry 39 }

allportsStatsInErrorsRate OBJECT-TYPE
    SYNTAX           Counter32
    MAX-ACCESS       read-only
    STATUS           current
    DESCRIPTION
            "Erroneus inbound packets rate for port."
    ::= { allportsStatsTableEntry 40 }

allportsStatsOutErrorsRate OBJECT-TYPE
    SYNTAX           Counter32
    MAX-ACCESS       read-only
    STATUS           current
    DESCRIPTION
            "Not sent packets due to error rate."
    ::= { allportsStatsTableEntry 41 }


clearPortsStats OBJECT-TYPE
    SYNTAX  INTEGER {
	ok(1),
	clear(2)
	}
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Setting this to clear(2) results in clearing the statistics for all ports."
    ::= { portStats 6 }

dot1RateStatsTable OBJECT-TYPE
    SYNTAX SEQUENCE OF Dot1RateStatsTableEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The table of bridging statistics per second."
    ::= { portStats 7}

dot1RateStatsTableEntry OBJECT-TYPE
    SYNTAX Dot1RateStatsTableEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Bridging statistics per second."
    INDEX { dot1RateStatsIndx }
    ::= { dot1RateStatsTable 1 }

Dot1RateStatsTableEntry ::= SEQUENCE {
    dot1RateStatsIndx                      PortNumber,
    dot1RatePortInFrames                   Counter32,
    dot1RatePortOutFrames                  Counter32,
    dot1RatePortInDiscards                 Counter32,
    dot1RateTpLearnedEntryDiscards         Counter32
    ,dot1RateStpPortForwardTransitions     Counter32
}

dot1RateStatsIndx OBJECT-TYPE
    SYNTAX  PortNumber
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The port index."
    ::= { dot1RateStatsTableEntry 1 }

dot1RatePortInFrames OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The number of frames that have been received
        per second by this port from its segment."
    ::= { dot1RateStatsTableEntry 2 }

dot1RatePortOutFrames OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The number of frames that have been transmitted
        per second by this port to its segment."
    ::= { dot1RateStatsTableEntry 3 }

dot1RatePortInDiscards OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Count of valid frames received which were
        discarded per second."
    ::= { dot1RateStatsTableEntry 4 }

dot1RateTpLearnedEntryDiscards OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The number per second of Forwarding Database
        entries, which have been or would have been
        learnt, but have been discarded due to a lack
        of space to store them."
    ::= { dot1RateStatsTableEntry 5 }


dot1RateStpPortForwardTransitions OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The number of times this port has transitioned
        per second from the Learning state to the
        Forwarding state."
    ::= { dot1RateStatsTableEntry 8 }

dot3RateStatsTable OBJECT-TYPE
    SYNTAX SEQUENCE OF Dot3RateStatsTableEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The table of Ethernet statistics per second."
    ::= { portStats 8}

dot3RateStatsTableEntry OBJECT-TYPE
    SYNTAX Dot3RateStatsTableEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Ethernet statistics per second."
    INDEX { dot3RateStatsIndx }
    ::= { dot3RateStatsTable 1 }

Dot3RateStatsTableEntry ::= SEQUENCE {
    dot3RateStatsIndx                       PortNumber,
    dot3RateStatsAlignmentErrors            Counter32,
    dot3RateStatsFCSErrors                  Counter32,
    dot3RateStatsSingleCollisionFrames      Counter32,
    dot3RateStatsMultipleCollisionFrames    Counter32,
    dot3RateStatsLateCollisions             Counter32,
    dot3RateStatsExcessiveCollisions        Counter32,
    dot3RateStatsInternalMacTransmitErrors  Counter32,
    dot3RateStatsFrameTooLongs              Counter32,
    dot3RateStatsInternalMacReceiveErrors   Counter32
}

dot3RateStatsIndx OBJECT-TYPE
    SYNTAX  PortNumber
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The port index."
    ::= { dot3RateStatsTableEntry 1 }

dot3RateStatsAlignmentErrors OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "A count of frames received per second on a particular
        interface that are not an integral number of octets
        in length and do not pass the FCS check."
    ::= { dot3RateStatsTableEntry 2 }

dot3RateStatsFCSErrors OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "A count of frames received per second on a particular
        interface that are an integral number of octets
        in length but do not pass the FCS check."
    ::= { dot3RateStatsTableEntry 3 }

dot3RateStatsSingleCollisionFrames OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "A count of successfully transmitted frames per second
        on a particular interface for which transmission is
        inhibited by exactly one collision."
    ::= { dot3RateStatsTableEntry 4 }

dot3RateStatsMultipleCollisionFrames OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "A count of successfully transmitted frames per second
        on a particular interface for which transmission is
        inhibited by more than one collision."
    ::= { dot3RateStatsTableEntry 5 }


dot3RateStatsLateCollisions OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The number of times per second that a collision
        is detected on a particular interface later than
        512 bit-times into the transmission of a packet."
    ::= { dot3RateStatsTableEntry 8 }

dot3RateStatsExcessiveCollisions OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "A count per second of frames for which
        transmission on a particular interface fails
        due to excessive collisions."
    ::= { dot3RateStatsTableEntry 9 }

dot3RateStatsInternalMacTransmitErrors OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "A count per second of frames for which transmission
        on a particular interface fails due to an internal
        MAC sublayer transmit error."
    ::= { dot3RateStatsTableEntry 10 }


dot3RateStatsFrameTooLongs OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "A count per second of frames received on a particular
        interface that exceed the maximum permitted frame size."
    ::= { dot3RateStatsTableEntry 12 }

dot3RateStatsInternalMacReceiveErrors OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "A count per second of frames for which reception on
        a particular interface fails due to an internal MAC
        sublayer receive error."
    ::= { dot3RateStatsTableEntry 13 }


-- NTP Statisitics

ntpPrimaryServerReqSent OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The total number of NTP requests sent to Primary NTP Server."
    ::= { ntpStats 1 }

ntpPrimaryServerRespRcvd OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The total number of NTP responces received from Primary NTP Server."
    ::= { ntpStats 2 }

ntpPrimaryServerUpdates OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The total number of NTP Updates by Primary NTP Server."
    ::= { ntpStats 3 }

ntpSecondaryServerReqSent OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The total number of NTP requests sent to Secondary NTP Server."
    ::= { ntpStats 4 }

ntpSecondaryServerRespRcvd OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The total number of NTP responces received from Secondary NTP Server."
    ::= { ntpStats 5 }

ntpSecondaryServerUpdates OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The total number of NTP Updates by Secondary NTP Server."
    ::= { ntpStats 6 }

ntpLastUpdateServer OBJECT-TYPE
    SYNTAX  INTEGER {
        none(0),
        primary(1),
        secondary(2)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The type of ntp server updated last time."
    ::= { ntpStats 7 }

ntpLastUpdateTime OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..127))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The last time updated by ntp server."
    ::= { ntpStats 8 }

ntpClearStats OBJECT-TYPE
    SYNTAX  INTEGER {
        ok(1),
        clear(2)
        }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Setting this value to clear(2) clears the stats for ntp."
    ::= { ntpStats 9 }

ntpSystemCurrentTime OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..127))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The current system time."
    ::= { ntpStats 10 }


aclStatsTable  OBJECT-TYPE
    SYNTAX      SEQUENCE OF AclStatsTableEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The table of ACL statistics."
    ::= { aclStats 1 }

aclStatsTableEntry  OBJECT-TYPE
    SYNTAX      AclStatsTableEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Statistics about a particular ACL configuration entry."
    INDEX { aclStatsIndex }
    ::= { aclStatsTable 1 }

AclStatsTableEntry  ::= SEQUENCE {
    aclStatsIndex          Integer32,
    aclStatsHits           Counter32,
    aclClearStats          INTEGER
    }

aclStatsIndex OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The acl index."
    ::= { aclStatsTableEntry 1 }

aclStatsHits OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Total number of hits for this ACL entry"
    ::= { aclStatsTableEntry 2 }

aclClearStats OBJECT-TYPE
    SYNTAX  INTEGER {
        ok(1),
        clear(2)
        }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Setting this value to clear(2) clears the stats for the ACL."
    ::= { aclStatsTableEntry 3 }


    vmapStatsTable  OBJECT-TYPE
    SYNTAX      SEQUENCE OF VmapStatsTableEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The table of VMAP statistics."
    ::= { aclStats 2 }

vmapStatsTableEntry  OBJECT-TYPE
    SYNTAX      VmapStatsTableEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Statistics about a particular VMAP configuration entry."
    INDEX { vmapStatsIndex }
    ::= { vmapStatsTable 1 }

VmapStatsTableEntry  ::= SEQUENCE {
    vmapStatsIndex          Integer32,
    vmapStatsHits           Counter32,
    vmapClearStats          INTEGER
    }

vmapStatsIndex OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The vmap index."
    ::= { vmapStatsTableEntry 1 }

vmapStatsHits OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Total number of hits for this VMAP entry"
    ::= { vmapStatsTableEntry 2 }

vmapClearStats OBJECT-TYPE
    SYNTAX  INTEGER {
        ok(1),
        clear(2)
        }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Setting this value to clear(2) clears the stats for the VMAP."
    ::= { vmapStatsTableEntry 3 }


acl6StatsTable  OBJECT-TYPE
	SYNTAX		SEQUENCE OF Acl6StatsTableEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
		"The table of IPv6 ACL statistics."
	::= { aclStats 3 }

acl6StatsTableEntry	OBJECT-TYPE
	SYNTAX		Acl6StatsTableEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
		"Statistics about a particular IPv6 ACL configuration entry."
	INDEX { aclStatsIndex }
	::= { acl6StatsTable 1 }

Acl6StatsTableEntry	::= SEQUENCE {
	acl6StatsIndex		   Integer32,
	acl6StatsHits		   Counter32,
	acl6ClearStats		   INTEGER
	}

acl6StatsIndex OBJECT-TYPE
	SYNTAX	Integer32
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"The ipv6 acl index."
	::= { acl6StatsTableEntry 1 }

acl6StatsHits OBJECT-TYPE
	SYNTAX	Counter32
	MAX-ACCESS	read-only
	STATUS	current
	DESCRIPTION
		"Total number of hits for this IPv6 ACL entry"
	::= { acl6StatsTableEntry 2 }

acl6ClearStats OBJECT-TYPE
	SYNTAX	INTEGER {
		ok(1),
		clear(2)
		}
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
		"Setting this value to clear(2) clears the stats for the IPv6 ACL."
	::= { acl6StatsTableEntry 3 }


-- Clear Statistics
snmpClearStats OBJECT-TYPE
    SYNTAX  INTEGER {
	ok(1),
	clear(2)
	}
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Setting this to clear(2) results in clearing the SNMP statistics."
    ::= { agClearStats 1 }

agDiffState OBJECT-TYPE
    SYNTAX  INTEGER {
        diff(1),
        flashdiff(2),
        idle(3),
        inprogress(4),
        complete(5)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
         "When this object is read the current state is returned.
          idle(3) indicates that there is no diff in progess.
          complete(5) indicates that the last diff operation is completed.
          Setting the value to diff(1), will start a new diff operation
          Diff compares the new configuration with the current configuration
          and shows the pending configuration changes.
          Setting the value to flashdiff(1), will start a new diff operation.
          flashdiff compares new configuration with the flash configuration.
          To read the configuration changes use the agDiffTable once the
          state of this variable returns complete.
          Once the agDiffTable is read the state should be set back to 'idle'
          which frees the diff buffer and others can issue a diff command via
          SNMP."
    ::= { agDiff 2 }

agDiffTableSize OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The number of strings in the diff table."
    ::= { agDiff 3 }

agDiffTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF AgDiffTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table of diff strings."
    ::= { agDiff 4 }

agDiffTableEntry OBJECT-TYPE
    SYNTAX  AgDiffTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "An entry in the diff table."
    INDEX   { agDiffIndex }
    ::= { agDiffTable 1 }

AgDiffTableEntry ::= SEQUENCE {
    agDiffIndex      Integer32,
    agDiffString     OCTET STRING
    }

agDiffIndex OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The table index."
    ::= { agDiffTableEntry 1 }

agDiffString OBJECT-TYPE
    SYNTAX  OCTET STRING
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "A string in the diff table."
    ::= { agDiffTableEntry 2 }

-- Config Dump
agCfgDumpState OBJECT-TYPE
    SYNTAX  INTEGER {
        dump(1),
        idle(2),
        inprogress(3),
        complete(4)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
         "When this object is read the current state is returned.
          idle(2) indicates that there is no dump in progess.
          complete(4) indicates that the last dump operation is completed.
          Setting the value to dump(1), will start a new dump operation
          Dump will show the current configuration.
          To read the configuration dump use the agCfgDumpTable once the
          state of this variable returns complete.
          Once the agCfgDumpTable is read the state should be set back to
          'idle' which frees the dump buffer and others can issue a dump
          command via SNMP."
    ::= { agCfgDump 2 }

agCfgDumpTableSize OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The number of strings in the dump table."
    ::= { agCfgDump 3 }

agCfgDumpTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF AgCfgDumpTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table of dump strings."
    ::= { agCfgDump 4 }

agCfgDumpTableEntry OBJECT-TYPE
    SYNTAX  AgCfgDumpTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "An entry in the dump table."
    INDEX   { agCfgDumpIndex }
    ::= { agCfgDumpTable 1 }

AgCfgDumpTableEntry ::= SEQUENCE {
    agCfgDumpIndex      Integer32,
    agCfgDumpString     OCTET STRING
    }

agCfgDumpIndex OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The table index."
    ::= { agCfgDumpTableEntry 1 }

agCfgDumpString OBJECT-TYPE
    SYNTAX  OCTET STRING
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "A string in the dump table."
    ::= { agCfgDumpTableEntry 2 }






-- Memory Statisitics Group
totalMemoryStats OBJECT-TYPE
    SYNTAX  Counter64
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total memory in bytes."
    ::= { memoryStats 1}

memoryFreeStats OBJECT-TYPE
    SYNTAX  Counter64
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The free memory in bytes."
    ::= { memoryStats 2}

memorySharedStats OBJECT-TYPE
    SYNTAX  Counter64
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The shared memory in bytes."
    ::= { memoryStats 3}

memoryBufferStats OBJECT-TYPE
    SYNTAX  Counter64
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The buffer memory in bytes."
    ::= { memoryStats 4}

swapTotalStats OBJECT-TYPE
    SYNTAX  Counter64
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total swap memory in bytes."
    ::= { memoryStats 5}

swapFreeStats OBJECT-TYPE
    SYNTAX  Counter64
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The free swap memory in bytes."
    ::= { memoryStats 6}

highTotalStats OBJECT-TYPE
    SYNTAX  Counter64
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total high memory in bytes."
    ::= { memoryStats 7}

highFreeStats OBJECT-TYPE
    SYNTAX  Counter64
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The free high memory in bytes."
    ::= { memoryStats 8}


-- GeaPort Information

geaportInfoTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF GeaportInfoTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table of gea port mapping."
    ::= { geaportInfo 1 }

geaportInfoTableEntry OBJECT-TYPE
    SYNTAX  GeaportInfoTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "An entry in the geaport table mapping."
    INDEX   { geaportInfoLogicalIndex }
    ::= { geaportInfoTable 1 }

GeaportInfoTableEntry ::= SEQUENCE {
    geaportInfoLogicalIndex    PortNumber,
    geaportInfoAlias	       DisplayString,
    geaportInfoPort            INTEGER,
    geaportInfoUnit            INTEGER
    }

geaportInfoLogicalIndex OBJECT-TYPE
    SYNTAX  PortNumber
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The logical port index."
    ::= { geaportInfoTableEntry 1 }

geaportInfoAlias OBJECT-TYPE
    SYNTAX  DisplayString
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
	"The GEA Port Alias."
    ::= { geaportInfoTableEntry 2 }

geaportInfoPort OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The GEA Port (0-based)."
    ::= { geaportInfoTableEntry 3 }

geaportInfoUnit OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The GEA Unit."
    ::= { geaportInfoTableEntry 4 }

-- SFP Information

sfpInfoTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF SfpInfoTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table of external port SFP information."
    ::= { sfpInfo 1 }

sfpInfoTableEntry OBJECT-TYPE
    SYNTAX  SfpInfoTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A row in the external port SFP information table."
    INDEX   { sfpInfoIndx }
    ::= { sfpInfoTable 1 }

SfpInfoTableEntry ::= SEQUENCE {
    sfpInfoIndx                 PortNumber,
    sfpInfoPort			DisplayString,
    sfpInfoDevice		DisplayString,
    sfpInfoTXEnable		INTEGER,
    sfpInfoRXSignal		INTEGER,
    sfpInfoTXFault		INTEGER,
    sfpInfoApproved		INTEGER,
    sfpInfoVendor               DisplayString,
    sfpInfoSerial               DisplayString
    }

sfpInfoIndx OBJECT-TYPE
    SYNTAX  PortNumber
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The external port SFX index."
    ::= { sfpInfoTableEntry 1 }

sfpInfoPort OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..6))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
	  "External Port SFP/XFP alias."
    ::= { sfpInfoTableEntry 2 }

sfpInfoDevice OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..6))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
          "External Port SFP/XFP Device."
    ::= { sfpInfoTableEntry 3 }

sfpInfoTXEnable OBJECT-TYPE
    SYNTAX  INTEGER {
	  notInstalled (1),
	  enabled (2),
	  disabled (3)
          , notAvailable (5)
    }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
	  "External Port SFP/XFP TX-Enable."
    ::= { sfpInfoTableEntry 4  }

sfpInfoRXSignal  OBJECT-TYPE
    SYNTAX  INTEGER {
	  notInstalled (1),
	  down (2),
	  link (3),
	  notAvailable (4)
    }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
          "External Port SFP/XFP RX-Signal."
    ::= { sfpInfoTableEntry 5 }

sfpInfoTXFault  OBJECT-TYPE
    SYNTAX  INTEGER {
          notInstalled (1),
          fault (2),
          none (3),
          notAvailable (4)
    }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
          "External Port SFP/XFP TX-Fault."
    ::= { sfpInfoTableEntry 6 }

sfpInfoApproved  OBJECT-TYPE
    SYNTAX  INTEGER {
      notInstalled (1),
      notApproved (2),
      sfpApproved (3)
      ,sfpAccepted (5)
    }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
          "External Port SFP/XFP Approval."
    ::= { sfpInfoTableEntry 7 }

sfpInfoVendor OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..32))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
          "External Port SFP/XFP device vendor."
    ::= { sfpInfoTableEntry 8 }

sfpInfoSerial OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..32))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
          "External Port SFP/XFP device serial."
    ::= { sfpInfoTableEntry 9 }

accessInfoClearAllUserFailAttempts OBJECT-TYPE
    SYNTAX INTEGER {
        ok(1),
        clear(2)
    }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Action Object. When set to clear(2),clears all the unsuccessful 
         attempts of users.  Otherwise nothing is done.
         ok(1) is returned always when read."
    ::= { accessInfo 1 }

accessInfoClearAllUserLocks OBJECT-TYPE
    SYNTAX INTEGER {
        ok(1),
        clear(2)
    }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Action Object. When set to clear(2), Unlock all locked users. 
         Otherwise nothing is done. ok(1) is returned always when read."
    ::= { accessInfo 2 }

accessUserInfoTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF AccessUserInfoTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table of user information."
    ::= { accessInfo 3 }

accessUserInfoTableEntry OBJECT-TYPE
    SYNTAX  AccessUserInfoTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "An entry in the user information table."
    INDEX   { accessUserInfoIndex}
    ::= { accessUserInfoTable 1 }

AccessUserInfoTableEntry ::= SEQUENCE {
    accessUserInfoIndex     Integer32,
    accessUserInfoLockState INTEGER,
    accessUserInfoClearFailAttempts INTEGER,
    accessUserInfoClearLock        INTEGER
    }

accessUserInfoIndex OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The table index. The index value corresponds to the same value
         of agAccessUserCurCfgUId for the user."
    ::= { accessUserInfoTableEntry 1 }

accessUserInfoLockState OBJECT-TYPE
    SYNTAX INTEGER {
        unlocked(1),
        locked(2)
    }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Lock State of a specific user, unlocked(1) or locked(2).
         When the state is locked the user is not allowed to login 
         until the account is unlocked by the administrator."
    ::= { accessUserInfoTableEntry 2 }

accessUserInfoClearFailAttempts OBJECT-TYPE
    SYNTAX INTEGER {
        ok(1),
        clear(2)
    }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Action Object. When set to clear(2), clears 
         the unsuccessful attempts of a particular user.
         Otherwise nothing is done. 
         ok(1) is returned always when read."
    ::= { accessUserInfoTableEntry 3 }

accessUserInfoClearLock OBJECT-TYPE
    SYNTAX INTEGER {
        ok(1),
        clear(2)
    }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Action Object. When set to clear(2), unlock a particular user.
         Otherwise nothing is done. 
         ok(1) is returned always when read."
    ::= { accessUserInfoTableEntry 4 }



-- ----------------------------------------------------------------------------
-- } INSERT:  agent
-- ----------------------------------------------------------------------------

layer2                  OBJECT IDENTIFIER ::= { g8124-mgmt 2 }
-- ----------------------------------------------------------------------------
-- { INSERT:  layer2
-- ----------------------------------------------------------------------------

layer2Configs     OBJECT IDENTIFIER ::= { layer2 1 }
layer2Stats       OBJECT IDENTIFIER ::= { layer2 2 }
layer2Info        OBJECT IDENTIFIER ::= { layer2 3 }
layer2Oper        OBJECT IDENTIFIER ::= { layer2 4 }

vlan              OBJECT IDENTIFIER ::= { layer2Configs 1 }
trunkgroup        OBJECT IDENTIFIER ::= { layer2Configs 2 }
stgCfg            OBJECT IDENTIFIER ::= { layer2Configs 3 }

mirroring         OBJECT IDENTIFIER ::= { layer2Configs 4 }

lacp              OBJECT IDENTIFIER ::= { layer2Configs 5 }
thash             OBJECT IDENTIFIER ::= { layer2Configs 6 }
mstCfg            OBJECT IDENTIFIER ::= { layer2Configs 7 }
l2GeneralCfg      OBJECT IDENTIFIER ::= { layer2Configs 8 }
failoverCfg       OBJECT IDENTIFIER ::= { layer2Configs 10 }
-- ----------------------------------------------------------------------------
-- { INSERT:  failoverCfg
-- ----------------------------------------------------------------------------

-- ----------------------------------------------------------------------------
-- { GLOBAL TEAMING CONFIG
-- ----------------------------------------------------------------------------

failoverCurCfgOnState                 OBJECT-TYPE
    SYNTAX      INTEGER  {
                    on(1),
                    off(2)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Failover ON/OFF setting."
    ::= { failoverCfg 1 }

failoverNewCfgOnState                 OBJECT-TYPE
    SYNTAX      INTEGER  {
                    on(1),
                    off(2)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Failover ON/OFF settings."
    ::= { failoverCfg 2 }


failoverMaxTriggerEntries             OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The maximum number of entries in the Failover Trigger Table."
    ::= { failoverCfg 5 }

-- } GLOBAL TEAMING CONFIG

-- ----------------------------------------------------------------------------
-- { CUR TEAMING FOP CONFIG
-- ----------------------------------------------------------------------------

failoverCurCfgTriggerTable             OBJECT-TYPE
    SYNTAX      SEQUENCE OF FailoverCurCfgTriggerTableEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The Failover Trigger Table."
    ::= { failoverCfg 6 }

failoverCurCfgTriggerTableEntry        OBJECT-TYPE
    SYNTAX      FailoverCurCfgTriggerTableEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A row in the Failover Trigger Table."
    INDEX  { failoverCurCfgTriggerId }
    ::= { failoverCurCfgTriggerTable 1 }

FailoverCurCfgTriggerTableEntry ::= SEQUENCE {
    failoverCurCfgTriggerId            Integer32,
    failoverCurCfgTriggerLimit         INTEGER, 
    failoverCurCfgTriggerMmonPort      OCTET STRING,
    failoverCurCfgTriggerMmonTrunk     OCTET STRING,
    failoverCurCfgTriggerMmonKey       DisplayString,
    failoverCurCfgTriggerMconPort      OCTET STRING,
    failoverCurCfgTriggerMconTrunk     OCTET STRING,
    failoverCurCfgTriggerMconKey       DisplayString,
    failoverCurCfgTriggerState         INTEGER
    }

failoverCurCfgTriggerId                OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Trigger identifier."
    ::= { failoverCurCfgTriggerTableEntry 1 }

failoverCurCfgTriggerState             OBJECT-TYPE
    SYNTAX      INTEGER  {
                    enabled(1),
                    disabled(2)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Enable or disable Trigger state"
    ::= { failoverCurCfgTriggerTableEntry 2 }


failoverCurCfgTriggerLimit             OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Limit # of operational links"
    ::= { failoverCurCfgTriggerTableEntry 3 }




failoverCurCfgTriggerMmonPort          OBJECT-TYPE
    SYNTAX      OCTET STRING
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Manual Monitor port list. The ports are presented in bitmap format:

             OCTET 1  OCTET 2  .....
             xxxxxxxx xxxxxxxx .....
             ||    || |_ port 8
             ||    ||
             ||    ||___ port 7
             ||    |____ port 6
             ||      .    .   .
             ||_________ port 1
             |__________ reserved

         where x : 1 - The represented port belongs to the Manual Monitor
                   0 - The represented port does not belong to the Manual Monitor"
    ::= { failoverCurCfgTriggerTableEntry 6 }
 

failoverCurCfgTriggerMmonTrunk         OBJECT-TYPE
    SYNTAX      OCTET STRING
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Manual Monitor trunk list. The trunks are presented in bitmap format:
 
             OCTET 1  OCTET 2  .....
             xxxxxxxx xxxxxxxx .....
             ||    || |_ trunk 8
             ||    ||
             ||    ||___ trunk 7
             ||    |____ trunk 6
             ||      .    .   .
             ||_________ trunk 1
             |__________ reserved
 
         where x : 1 - The represented trunk belongs to the Manual Monitor
                   0 - The represented trunk does not belong to the Manual Monitor"
    ::= { failoverCurCfgTriggerTableEntry 7 }
 
failoverCurCfgTriggerMmonKey           OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The LACP admin key. This is an array of 16-bit read-only values."
    ::= { failoverCurCfgTriggerTableEntry 8 }


failoverCurCfgTriggerMconPort          OBJECT-TYPE
    SYNTAX      OCTET STRING
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Manual Control port list. The ports are presented in bitmap format:

             OCTET 1  OCTET 2  .....
             xxxxxxxx xxxxxxxx .....
             ||    || |_ port 8
             ||    ||
             ||    ||___ port 7
             ||    |____ port 6
             ||      .    .   .
             ||_________ port 1
             |__________ reserved

         where x : 1 - The represented port belongs to the Manual Control
                   0 - The represented port does not belong to the Manual Control"
    ::= { failoverCurCfgTriggerTableEntry 9 }
 
 

failoverCurCfgTriggerMconTrunk         OBJECT-TYPE
    SYNTAX      OCTET STRING
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Manual Control trunk list. The trunks are presented in bitmap format:
 
             OCTET 1  OCTET 2  .....
             xxxxxxxx xxxxxxxx .....
             ||    || |_ trunk 8
             ||    ||
             ||    ||___ trunk 7
             ||    |____ trunk 6
             ||      .    .   .
             ||_________ trunk 1
             |__________ reserved
 
         where x : 1 - The represented trunk belongs to the Manual Control
                   0 - The represented trunk does not belong to the Manual Control"
    ::= { failoverCurCfgTriggerTableEntry 11 }
 
failoverCurCfgTriggerMconKey           OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The LACP admin key. This is an array of 16-bit read-only values."
    ::= { failoverCurCfgTriggerTableEntry 12 }
 

-- } CUR TEAMING FOP CONFIG

-- ----------------------------------------------------------------------------
-- { NEW TEAMING FOP CONFIG
-- ----------------------------------------------------------------------------

failoverNewCfgTriggerTable             OBJECT-TYPE
    SYNTAX      SEQUENCE OF FailoverNewCfgTriggerTableEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The Failover Trigger Table."
    ::= { failoverCfg 7 }

failoverNewCfgTriggerTableEntry        OBJECT-TYPE
    SYNTAX      FailoverNewCfgTriggerTableEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A row in the Failover Trigger Table."
    INDEX  { failoverNewCfgTriggerId }
    ::= { failoverNewCfgTriggerTable 1 }

FailoverNewCfgTriggerTableEntry ::= SEQUENCE {
    failoverNewCfgTriggerId            Integer32,
    failoverNewCfgTriggerLimit         INTEGER,
    failoverNewCfgTriggerMmonPort      OCTET STRING,
    failoverNewCfgTriggerMmonPortAdd   PortNumber,
    failoverNewCfgTriggerMmonPortRem   PortNumber,
    failoverNewCfgTriggerMmonTrunk     OCTET STRING,
    failoverNewCfgTriggerMmonTrunkAdd  INTEGER,
    failoverNewCfgTriggerMmonTrunkRem  INTEGER,
    failoverNewCfgTriggerMmonKey       DisplayString,
    failoverNewCfgTriggerMmonKeyAdd    INTEGER,
    failoverNewCfgTriggerMmonKeyRem    INTEGER,
    failoverNewCfgTriggerMconPort      OCTET STRING,
    failoverNewCfgTriggerMconPortAdd   PortNumber,
    failoverNewCfgTriggerMconPortRem   PortNumber,
    failoverNewCfgTriggerMconTrunk     OCTET STRING,
    failoverNewCfgTriggerMconTrunkAdd  INTEGER,
    failoverNewCfgTriggerMconTrunkRem  INTEGER,
    failoverNewCfgTriggerMconKey       DisplayString,
    failoverNewCfgTriggerMconKeyAdd    INTEGER,
    failoverNewCfgTriggerMconKeyRem    INTEGER,
    failoverNewCfgTriggerState         INTEGER,
    failoverNewCfgTriggerDelete        INTEGER
    }
 
failoverNewCfgTriggerId                OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Trigger identifier."
    ::= { failoverNewCfgTriggerTableEntry 1 }

failoverNewCfgTriggerState             OBJECT-TYPE
    SYNTAX      INTEGER  {
                    enabled(1),
                    disabled(2)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Enable or disable Trigger state"
    ::= { failoverNewCfgTriggerTableEntry 2 }

failoverNewCfgTriggerLimit             OBJECT-TYPE
    SYNTAX      INTEGER (0..1024)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Limit # of operational links"
    ::= { failoverNewCfgTriggerTableEntry 3 }



failoverNewCfgTriggerMmonPort          OBJECT-TYPE
    SYNTAX      OCTET STRING
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Manual Monitor port list. The ports are presented in bitmap format:

             OCTET 1  OCTET 2  .....
             xxxxxxxx xxxxxxxx .....
             ||    || |_ port 8
             ||    ||
             ||    ||___ port 7
             ||    |____ port 6
             ||      .    .   .
             ||_________ port 1
             |__________ reserved

         where x : 1 - The represented port belongs to the Manual Monitor
                   0 - The represented port does not belong to the Manual Monitor"
    ::= { failoverNewCfgTriggerTableEntry 10 }

failoverNewCfgTriggerMmonPortAdd       OBJECT-TYPE
    SYNTAX      PortNumber
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Add port to Manual Monitor.  When read, 0 is returned."
    ::= { failoverNewCfgTriggerTableEntry 11 }

failoverNewCfgTriggerMmonPortRem       OBJECT-TYPE
    SYNTAX      PortNumber
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Remove port from Manual Monitor.  When read, 0 is returned."
    ::= { failoverNewCfgTriggerTableEntry 12 }


failoverNewCfgTriggerMmonTrunk         OBJECT-TYPE
    SYNTAX      OCTET STRING
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Manual Monitor trunk list. The trunks are presented in bitmap format:

             OCTET 1  OCTET 2  .....
             xxxxxxxx xxxxxxxx .....
             ||    || |_ trunk 8
             ||    ||
             ||    ||___ trunk 7
             ||    |____ trunk 6
             ||      .    .   .
             ||_________ trunk 1
             |__________ reserved

         where x : 1 - The represented trunk belongs to the Manual Monitor
                   0 - The represented trunk does not belong to the Manual Monitor"
    ::= { failoverNewCfgTriggerTableEntry 13 }

failoverNewCfgTriggerMmonTrunkAdd      OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Add trunk to Manual Monitor.  When read, 0 is returned."
    ::= { failoverNewCfgTriggerTableEntry 14 }

failoverNewCfgTriggerMmonTrunkRem      OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Remove trunk from Manual Monitor.  When read, 0 is returned."
    ::= { failoverNewCfgTriggerTableEntry 15 }
 
failoverNewCfgTriggerMmonKey           OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The LACP admin key. This is an array of 16-bit read-only values."
    ::= { failoverNewCfgTriggerTableEntry 16 }

failoverNewCfgTriggerMmonKeyAdd        OBJECT-TYPE
    SYNTAX      INTEGER (1..65535)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Add LACP admin key to Manual Monitor.  When read, 0 is returned."
    ::= { failoverNewCfgTriggerTableEntry 17 }

failoverNewCfgTriggerMmonKeyRem        OBJECT-TYPE
    SYNTAX      INTEGER (1..65535) 
    MAX-ACCESS  read-create
    STATUS      current  
    DESCRIPTION 
        "Remove LACP admin key from Manual Monitor.  When read, 0 is returned."
    ::= { failoverNewCfgTriggerTableEntry 18 } 


failoverNewCfgTriggerMconPort          OBJECT-TYPE
    SYNTAX      OCTET STRING
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Manual Control port list. The ports are presented in bitmap format:

             OCTET 1  OCTET 2  .....
             xxxxxxxx xxxxxxxx .....
             ||    || |_ port 8
             ||    ||
             ||    ||___ port 7
             ||    |____ port 6
             ||      .    .   .
             ||_________ port 1
             |__________ reserved

         where x : 1 - The represented port belongs to the Manual Control
                   0 - The represented port does not belong to the Manual Control"
    ::= { failoverNewCfgTriggerTableEntry 19 }

failoverNewCfgTriggerMconPortAdd       OBJECT-TYPE
    SYNTAX      PortNumber
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Add port to Manual Control.  When read, 0 is returned."
    ::= { failoverNewCfgTriggerTableEntry 20 }

failoverNewCfgTriggerMconPortRem       OBJECT-TYPE
    SYNTAX      PortNumber
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Remove port from Manual Control.  When read, 0 is returned."
    ::= { failoverNewCfgTriggerTableEntry 21 }



failoverNewCfgTriggerMconTrunk         OBJECT-TYPE
    SYNTAX      OCTET STRING
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Manual Control trunk list. The trunks are presented in bitmap format:

             OCTET 1  OCTET 2  .....
             xxxxxxxx xxxxxxxx .....
             ||    || |_ trunk 8
             ||    ||
             ||    ||___ trunk 7
             ||    |____ trunk 6
             ||      .    .   .
             ||_________ trunk 1
             |__________ reserved

         where x : 1 - The represented trunk belongs to the Manual Control
                   0 - The represented trunk does not belong to the Manual Control"
    ::= { failoverNewCfgTriggerTableEntry 25 }

failoverNewCfgTriggerMconTrunkAdd      OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Add trunk to Manual Control.  When read, 0 is returned."
    ::= { failoverNewCfgTriggerTableEntry 26 }

failoverNewCfgTriggerMconTrunkRem      OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Remove trunk from Manual Control.  When read, 0 is returned."
    ::= { failoverNewCfgTriggerTableEntry 27 }
 
failoverNewCfgTriggerMconKey           OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The LACP admin key. This is an array of 16-bit read-only values."
    ::= { failoverNewCfgTriggerTableEntry 28 }

failoverNewCfgTriggerMconKeyAdd        OBJECT-TYPE
    SYNTAX      INTEGER (1..65535)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Add LACP admin key to Manual Control.  When read, 0 is returned."
    ::= { failoverNewCfgTriggerTableEntry 29 }

failoverNewCfgTriggerMconKeyRem        OBJECT-TYPE
    SYNTAX      INTEGER (1..65535) 
    MAX-ACCESS  read-create
    STATUS      current  
    DESCRIPTION 
        "Remove LACP admin key from Manual Control.  When read, 0 is returned."
    ::= { failoverNewCfgTriggerTableEntry 30 } 


failoverNewCfgTriggerDelete            OBJECT-TYPE
    SYNTAX      INTEGER  {
                    other(1),
                    delete(2)
                }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Setting the value to delete(2) will delete the entire
         row.  When read, other(1) is returned."
    ::= { failoverNewCfgTriggerTableEntry 31 } 


-- } NEW TEAMING FOP CONFIG


-- ----------------------------------------------------------------------------
-- } INSERT:  failoverCfg
-- ----------------------------------------------------------------------------
fdb               OBJECT IDENTIFIER ::= { layer2Configs 13 }
hotlinksCfg       OBJECT IDENTIFIER ::= { layer2Configs 14 }
-- ----------------------------------------------------------------------------
-- { INSERT:  hotlinksCfg
-- ----------------------------------------------------------------------------

-- ----------------------------------------------------------------------------
-- { GLOBAL HOTLINKS CONFIG
-- ----------------------------------------------------------------------------

hotlinksCurCfgOnState                  OBJECT-TYPE
    SYNTAX      INTEGER  {
                    on(1),
                    off(2)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Hot Links ON/OFF setting."
    ::= { hotlinksCfg 1 }

hotlinksNewCfgOnState                  OBJECT-TYPE
    SYNTAX      INTEGER  {
                    on(1),
                    off(2)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Hot Links ON/OFF settings."
    ::= { hotlinksCfg 2 }

hotlinksCurCfgFdbUpdateState           OBJECT-TYPE
    SYNTAX      INTEGER {
                    enabled(1),
                    disabled(2)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Enable/disable Hot Links FDB Update setting."
    ::= { hotlinksCfg 3 }

hotlinksNewCfgFdbUpdateState           OBJECT-TYPE
    SYNTAX      INTEGER  {
                    enabled(1),
                    disabled(2)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Enable/disable Hot Links FDB Update setting."
    ::= { hotlinksCfg 4 }

hotlinksMaxTriggerEntries              OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The maximum number of entries in the Hot Links Trigger Table."
    ::= { hotlinksCfg 5 }

-- } GLOBAL HOTLINKS CONFIG

-- ----------------------------------------------------------------------------
-- { CUR HOTLINKS FOP CONFIG
-- ----------------------------------------------------------------------------

hotlinksCurCfgTriggerTable             OBJECT-TYPE
    SYNTAX      SEQUENCE OF HotlinksCurCfgTriggerTableEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The Hot Links Trigger Table."
    ::= { hotlinksCfg 6 }

hotlinksCurCfgTriggerTableEntry        OBJECT-TYPE
    SYNTAX      HotlinksCurCfgTriggerTableEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A row in the Hot Links Trigger Table."
    INDEX  { hotlinksCurCfgTriggerId }
    ::= { hotlinksCurCfgTriggerTable 1 }

HotlinksCurCfgTriggerTableEntry ::= SEQUENCE {
    hotlinksCurCfgTriggerId              Integer32,
    hotlinksCurCfgTriggerName            DisplayString,
    hotlinksCurCfgTriggerState           INTEGER,
    hotlinksCurCfgTriggerPreemptState    INTEGER, 
    hotlinksCurCfgTriggerFdelay          Integer32,
    hotlinksCurCfgTriggerMasterPort      Integer32,
    hotlinksCurCfgTriggerMasterTrunk     Integer32,
    hotlinksCurCfgTriggerBackupPort      Integer32,
    hotlinksCurCfgTriggerBackupTrunk     Integer32,
    hotlinksCurCfgTriggerDelete          INTEGER
  , hotlinksCurCfgTriggerMasterAdminkey  Integer32
  , hotlinksCurCfgTriggerBackupAdminkey  Integer32
    }

hotlinksCurCfgTriggerId                OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Trigger identifier."
    ::= { hotlinksCurCfgTriggerTableEntry 1 }

hotlinksCurCfgTriggerName              OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "A textual string containing the trigger name."
    ::= { hotlinksCurCfgTriggerTableEntry 2 }

hotlinksCurCfgTriggerState             OBJECT-TYPE
    SYNTAX      INTEGER  {
                    enabled(1),
                    disabled(2)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Enable/disable Trigger state."
    ::= { hotlinksCurCfgTriggerTableEntry 3 }

hotlinksCurCfgTriggerPreemptState      OBJECT-TYPE
    SYNTAX      INTEGER  {
                    enabled(1),
                    disabled(2)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Enable/disable Preemption state."
    ::= { hotlinksCurCfgTriggerTableEntry 4 }

hotlinksCurCfgTriggerFdelay            OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Forward Delay setting (in secs)."
    ::= { hotlinksCurCfgTriggerTableEntry 5 }

hotlinksCurCfgTriggerMasterPort        OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The master interface port number."
    ::= { hotlinksCurCfgTriggerTableEntry 6 }

hotlinksCurCfgTriggerMasterTrunk       OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The master interface trunk number."
    ::= { hotlinksCurCfgTriggerTableEntry 7 }

hotlinksCurCfgTriggerBackupPort        OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The backup interface port number."
    ::= { hotlinksCurCfgTriggerTableEntry 8 }

hotlinksCurCfgTriggerBackupTrunk       OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The backup interface trunk number."
    ::= { hotlinksCurCfgTriggerTableEntry 9 }

hotlinksCurCfgTriggerDelete       OBJECT-TYPE
    SYNTAX      INTEGER  {
                    other(1),
                    delete(2)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Delete a Hot Links trigger configuration."
    ::= { hotlinksCurCfgTriggerTableEntry 10 }

hotlinksCurCfgTriggerMasterAdminkey       OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The master interface admin key number."
    ::= { hotlinksCurCfgTriggerTableEntry 11 }

hotlinksCurCfgTriggerBackupAdminkey       OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The backup interface admin key number."
    ::= { hotlinksCurCfgTriggerTableEntry 12 }

-- } CUR HOTLINKS FOP CONFIG

-- ----------------------------------------------------------------------------
-- { NEW HOTLINKS FOP CONFIG
-- ----------------------------------------------------------------------------

hotlinksNewCfgTriggerTable             OBJECT-TYPE
    SYNTAX      SEQUENCE OF HotlinksNewCfgTriggerTableEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The Hot Links Trigger Table."
    ::= { hotlinksCfg 7 }

hotlinksNewCfgTriggerTableEntry        OBJECT-TYPE
    SYNTAX      HotlinksNewCfgTriggerTableEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A row in the Hot Links Trigger Table."
    INDEX  { hotlinksNewCfgTriggerId }
    ::= { hotlinksNewCfgTriggerTable 1 }

HotlinksNewCfgTriggerTableEntry ::= SEQUENCE {
    hotlinksNewCfgTriggerId              Integer32,
    hotlinksNewCfgTriggerName            DisplayString,
    hotlinksNewCfgTriggerState           INTEGER,
    hotlinksNewCfgTriggerPreemptState    INTEGER, 
    hotlinksNewCfgTriggerFdelay          Integer32,
    hotlinksNewCfgTriggerMasterPort      Integer32,
    hotlinksNewCfgTriggerMasterTrunk     Integer32,
    hotlinksNewCfgTriggerBackupPort      Integer32,
    hotlinksNewCfgTriggerBackupTrunk     Integer32,
    hotlinksNewCfgTriggerDelete          INTEGER
  , hotlinksNewCfgTriggerMasterAdminkey  Integer32
  , hotlinksNewCfgTriggerBackupAdminkey  Integer32
    }
 
hotlinksNewCfgTriggerId                OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Trigger identifier."
    ::= { hotlinksNewCfgTriggerTableEntry 1 }

hotlinksNewCfgTriggerName              OBJECT-TYPE
    SYNTAX      DisplayString (SIZE(0..33))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "A textual string containing the trigger name."
    ::= { hotlinksNewCfgTriggerTableEntry 2 }

hotlinksNewCfgTriggerState             OBJECT-TYPE
    SYNTAX      INTEGER  {
                    enabled(1),
                    disabled(2)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Enable/disable Trigger state."
    ::= { hotlinksNewCfgTriggerTableEntry 3 }

hotlinksNewCfgTriggerPreemptState      OBJECT-TYPE
    SYNTAX      INTEGER  {
                    enabled(1),
                    disabled(2)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Enable/disable Preemption state."
    ::= { hotlinksNewCfgTriggerTableEntry 4 }

hotlinksNewCfgTriggerFdelay            OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Forward Delay setting (in secs)."
    ::= { hotlinksNewCfgTriggerTableEntry 5 }

hotlinksNewCfgTriggerMasterPort        OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The master interface port number."
    ::= { hotlinksNewCfgTriggerTableEntry 6 }

hotlinksNewCfgTriggerMasterTrunk       OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The master interface trunk number."
    ::= { hotlinksNewCfgTriggerTableEntry 7 }

hotlinksNewCfgTriggerBackupPort        OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The backup interface port number."
    ::= { hotlinksNewCfgTriggerTableEntry 8 }

hotlinksNewCfgTriggerBackupTrunk       OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The backup interface trunk number."
    ::= { hotlinksNewCfgTriggerTableEntry 9 }

hotlinksNewCfgTriggerDelete       OBJECT-TYPE
    SYNTAX      INTEGER  {
                    other(1),
                    delete(2)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Delete a Hot Links trigger configuration."
    ::= { hotlinksNewCfgTriggerTableEntry 10 }

hotlinksNewCfgTriggerMasterAdminkey        OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The master interface admin key number."
    ::= { hotlinksNewCfgTriggerTableEntry 11 }

hotlinksNewCfgTriggerBackupAdminkey        OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The backup interface admin key number."
    ::= { hotlinksNewCfgTriggerTableEntry 12 }

-- } NEW HOTLINKS FOP CONFIG

-- ----------------------------------------------------------------------------
-- { BPDU FLOOD CONFIG
-- ----------------------------------------------------------------------------
hotlinksCurCfgBpduState                OBJECT-TYPE
    SYNTAX      INTEGER {
                    enabled(1),
                    disabled(2)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Enable/disable Hot Links BPDU flood setting."
    ::= { hotlinksCfg 8 }

hotlinksNewCfgBpduState                OBJECT-TYPE
    SYNTAX      INTEGER  {
                    enabled(1),
                    disabled(2)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Enable/disable Hot Links BPDU flood setting."
    ::= { hotlinksCfg 9 }

-- } BPDU FLOOD CONFIG

-- ----------------------------------------------------------------------------
-- { FDB UPDATE RATE CONFIG
-- ----------------------------------------------------------------------------
hotlinksCurCfgFdbUpdateRate            OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Hot Links FDB update rate (packets per second)."
    ::= { hotlinksCfg 10 }

hotlinksNewCfgFdbUpdateRate            OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Hot Links FDB update rate (packets per second)."
    ::= { hotlinksCfg 11 }

-- } FDB UPDATE RATE CONFIG

-- ----------------------------------------------------------------------------
-- } INSERT:  hotlinksCfg
-- ----------------------------------------------------------------------------
lldpCfg           OBJECT IDENTIFIER ::= { layer2Configs 15 }

vlagCfg           OBJECT IDENTIFIER ::= { layer2Configs 18 }
vlagIslCfg        OBJECT IDENTIFIER ::= { vlagCfg 1 }

ecpCfg            OBJECT IDENTIFIER ::= { layer2Configs 19 }

thashL2           OBJECT IDENTIFIER ::= { thash 1 }

mirrPortMirr      OBJECT IDENTIFIER ::= { mirroring 1 }

mstGeneralCfg     OBJECT IDENTIFIER ::= { mstCfg 1 }
mstCistCfg        OBJECT IDENTIFIER ::= { mstCfg 2 }


fdbGeneralCfg	  OBJECT IDENTIFIER ::= { fdb 1 }


-- FDB
fdbCurCfgAgingTime  OBJECT-TYPE
    SYNTAX   Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Fdb current aging time"
    ::= { fdbGeneralCfg 1 }

fdbNewCfgAgingTime OBJECT-TYPE
    SYNTAX   Integer32
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Fdb new aging time."
    ::= { fdbGeneralCfg 2 }



fdbStats          OBJECT IDENTIFIER ::= { layer2Stats 1 }
stpStats          OBJECT IDENTIFIER ::= { layer2Stats 2 }
lacpStats         OBJECT IDENTIFIER ::= { layer2Stats 4 }
hotlinksStats     OBJECT IDENTIFIER ::= { layer2Stats 6 }
-- ----------------------------------------------------------------------------
-- { INSERT:  hotlinksStats
-- ----------------------------------------------------------------------------

hotlinksStatsTriggerTable              OBJECT-TYPE
    SYNTAX      SEQUENCE OF HotlinksStatsTriggerTableEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The Hot Links Trigger Table Stats."
    ::= { hotlinksStats 1 }

hotlinksStatsTriggerTableEntry         OBJECT-TYPE
    SYNTAX      HotlinksStatsTriggerTableEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A row in the Hot Links Trigger Table Stats."
    INDEX  { hotlinksStatsTriggerId }
    ::= { hotlinksStatsTriggerTable 1 }

HotlinksStatsTriggerTableEntry ::= SEQUENCE {
    hotlinksStatsTriggerId             Integer32,
    hotlinksStatsTriggerName           DisplayString,
    hotlinksStatsTriggerMasterActive   Integer32,
    hotlinksStatsTriggerBackupActive   Integer32,
    hotlinksStatsTriggerFdbUpdate      Integer32,
    hotlinksStatsTriggerFdbFailed      Integer32
    }

hotlinksStatsTriggerId                 OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Trigger identifier."
    ::= { hotlinksStatsTriggerTableEntry 1 }

hotlinksStatsTriggerName               OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "A textual string containing the trigger name."
    ::= { hotlinksStatsTriggerTableEntry 2 }

hotlinksStatsTriggerMasterActive       OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of times the master interface was set to active."
    ::= { hotlinksStatsTriggerTableEntry 3 }

hotlinksStatsTriggerBackupActive       OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of times the backup interface was set to active."
    ::= { hotlinksStatsTriggerTableEntry 4 }

hotlinksStatsTriggerFdbUpdate          OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of times an FDB update was performed."
    ::= { hotlinksStatsTriggerTableEntry 5 }

hotlinksStatsTriggerFdbFailed          OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of times an FDB update failed."
    ::= { hotlinksStatsTriggerTableEntry 6 }

-- ----------------------------------------------------------------------------
-- } INSERT:  hotlinksStats
-- ----------------------------------------------------------------------------
lldpStats	  OBJECT IDENTIFIER ::= { layer2Stats 7 }
oamStats          OBJECT IDENTIFIER ::= { layer2Stats 8 }

vlagStats         OBJECT IDENTIFIER ::= { layer2Stats 11 }
vlagStatsSystem   OBJECT IDENTIFIER ::= { vlagStats 1 }
vlagStatsIsl      OBJECT IDENTIFIER ::= { vlagStats 2 }
vlagStatsHealth   OBJECT IDENTIFIER ::= { vlagStats 3 }
vlagStatsLacp     OBJECT IDENTIFIER ::= { vlagStats 4 }
vlagStatsPdu      OBJECT IDENTIFIER ::= { vlagStats 5 }
vlagStatsIgmp     OBJECT IDENTIFIER ::= { vlagStats 6 }

fdbInfo           OBJECT IDENTIFIER ::= { layer2Info 1 }
stpInfo           OBJECT IDENTIFIER ::= { layer2Info 2 }
lacpInfo          OBJECT IDENTIFIER ::= { layer2Info 3 }
cistInfo          OBJECT IDENTIFIER ::= { layer2Info 4 }
genInfo           OBJECT IDENTIFIER ::= { layer2Info 7 }
vlanInfo          OBJECT IDENTIFIER ::= { layer2Info 5 }
trunkGroupInfo    OBJECT IDENTIFIER ::= { layer2Info 9 }
hotlinksInfo      OBJECT IDENTIFIER ::= { layer2Info 10 }
-- ----------------------------------------------------------------------------
-- { INSERT:  hotlinksInfo
-- ----------------------------------------------------------------------------

hotlinksInfoOnState                    OBJECT-TYPE
    SYNTAX      INTEGER  {
                    on(1),
                    off(2)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Hot Links ON/OFF setting info."
    ::= { hotlinksInfo 1 }

hotlinksInfoFdbUpdateState             OBJECT-TYPE
    SYNTAX      INTEGER {
                    enabled(1),
                    disabled(2)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Enable/disable Hot Links FDB Update setting info."
    ::= { hotlinksInfo 2 }

hotlinksInfoTriggerTable               OBJECT-TYPE
    SYNTAX      SEQUENCE OF HotlinksInfoTriggerTableEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The Hot Links Trigger Table Info."
    ::= { hotlinksInfo 3 }

hotlinksInfoBpduState                  OBJECT-TYPE
    SYNTAX      INTEGER {
                    enabled(1),
                    disabled(2)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Enable/disable Hot Links BPDU flood setting info."
    ::= { hotlinksInfo 4 }

hotlinksInfoFdbUpdateRate              OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Hot Links FDB update rate (packets per second)."
    ::= { hotlinksInfo 5 }

hotlinksInfoTriggerTableEntry          OBJECT-TYPE
    SYNTAX      HotlinksInfoTriggerTableEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A row in the Hot Links Trigger Table Info."
    INDEX  { hotlinksInfoTriggerId }
    ::= { hotlinksInfoTriggerTable 1 }

HotlinksInfoTriggerTableEntry ::= SEQUENCE {
    hotlinksInfoTriggerId              Integer32,
    hotlinksInfoTriggerName            DisplayString,
    hotlinksInfoTriggerState           INTEGER,
    hotlinksInfoTriggerPreemptState    INTEGER,
    hotlinksInfoTriggerFdelay          Integer32,
    hotlinksInfoTriggerActive          DisplayString
    }

hotlinksInfoTriggerId                  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Trigger identifier."
    ::= { hotlinksInfoTriggerTableEntry 1 }

hotlinksInfoTriggerName                OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "A textual string containing the trigger name."
    ::= { hotlinksInfoTriggerTableEntry 2 }

hotlinksInfoTriggerState               OBJECT-TYPE
    SYNTAX      INTEGER  {
                    enabled(1),
                    disabled(2)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Enable/disable Trigger state info."
    ::= { hotlinksInfoTriggerTableEntry 3 }

hotlinksInfoTriggerPreemptState        OBJECT-TYPE
    SYNTAX      INTEGER  {
                    enabled(1),
                    disabled(2)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Enable/disable Preemption state info."
    ::= { hotlinksInfoTriggerTableEntry 4 }

hotlinksInfoTriggerFdelay              OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Forward Delay setting info (in secs)."
    ::= { hotlinksInfoTriggerTableEntry 5 }

hotlinksInfoTriggerActive              OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "A textual string containing the active interface info."
    ::= { hotlinksInfoTriggerTableEntry 6 }


-- ----------------------------------------------------------------------------
-- } INSERT:  hotlinksInfo
-- ----------------------------------------------------------------------------
lldpInfo          OBJECT IDENTIFIER ::= { layer2Info 11 }

cistGeneralInfo   OBJECT IDENTIFIER ::= { cistInfo 1 }
oamInfo           OBJECT IDENTIFIER ::= { layer2Info 12 }
udldInfo          OBJECT IDENTIFIER ::= { layer2Info 13 }
failoverInfo      OBJECT IDENTIFIER ::= { layer2Info 14 }
-- ----------------------------------------------------------------------------
-- { INSERT:  failoverInfo
-- ----------------------------------------------------------------------------

failoverInfoState   OBJECT-TYPE
    SYNTAX      INTEGER {
                    on(1),
                    off(2)
                }
    MAX-ACCESS  read-only  
    STATUS      current
    DESCRIPTION 
        "Current state of failover"
    ::= { failoverInfo 1 }

failoverInfoTriggerTable    OBJECT-TYPE
    SYNTAX      SEQUENCE OF FailoverInfoTriggerEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "This table holds the information for individual triggers"
    ::= { failoverInfo 3 }

failoverInfoTriggerEntry   OBJECT-TYPE
    SYNTAX      FailoverInfoTriggerEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A row in the failover trigger table."
    INDEX       { failoverInfoTriggerId }
    ::= { failoverInfoTriggerTable 1 }

FailoverInfoTriggerEntry ::= SEQUENCE {
    failoverInfoTriggerId               Integer32,
    failoverInfoTriggerState            INTEGER,
    failoverInfoTriggerLimit            INTEGER, 
    failoverInfoTriggerMonitorState     INTEGER,
    failoverInfoTriggerMonitorPorts     OCTET STRING,
    failoverInfoTriggerControlState     INTEGER,
    failoverInfoTriggerControlPorts     OCTET STRING,
    failoverInfoTriggerControlPorts     OCTET STRING
    }

failoverInfoTriggerId   OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The trigger identifier."
    ::= { failoverInfoTriggerEntry 1 }

failoverInfoTriggerState    OBJECT-TYPE
    SYNTAX      INTEGER  {
                    enabled(1),
                    disabled(2)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The trigger state."
    ::= { failoverInfoTriggerEntry 2 }

failoverInfoTriggerLimit    OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Limit number of operational links"
    ::= { failoverInfoTriggerEntry 3 }

failoverInfoTriggerMonitorState OBJECT-TYPE
    SYNTAX  INTEGER{
        up(1),
        down(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The runtime monitor state"
    ::= { failoverInfoTriggerEntry 4 }

failoverInfoTriggerMonitorPorts OBJECT-TYPE
    SYNTAX      OCTET STRING
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The list of ports that are monitored. The ports are
         represented in bitmap format in receiving order:

              OCTET 1  OCTET 2  .....
             xxxxxxxx xxxxxxxx .....
             ||    || |_ port 8
             ||    ||
             ||    ||___ port 7
             ||    |____ port 6
             ||      .    .   .
             ||_________ port 1
             |__________ reserved

         where x : 1 - The represented port belongs to Monitor list
            0 - The represented port does not belong to Monitor list"
    ::= { failoverInfoTriggerEntry 5 }

failoverInfoTriggerControlState OBJECT-TYPE
    SYNTAX      INTEGER{
        auto-controlled(1),
        auto-disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The runtime control state"
    ::= { failoverInfoTriggerEntry 6 }

failoverInfoTriggerControlPorts OBJECT-TYPE
    SYNTAX      OCTET STRING
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The list of ports that are controlled. The ports are
         represented in bitmap format in receiving order:

              OCTET 1  OCTET 2  .....
             xxxxxxxx xxxxxxxx .....
             ||    || |_ port 8
             ||    ||
             ||    ||___ port 7
             ||    |____ port 6
             ||      .    .   .
             ||_________ port 1
             |__________ reserved

         where x : 1 - The represented port belongs to Control list
            0 - The represented port does not belong to Control list"
    ::= { failoverInfoTriggerEntry 7 }


failoverInfoMonPortStateTable    OBJECT-TYPE
    SYNTAX      SEQUENCE OF FailoverInfoTriggerMonPortEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "This table holds the information for individual triggers"
    ::= { failoverInfo 4 }

failoverInfoTriggerMonPortEntry   OBJECT-TYPE
    SYNTAX      FailoverInfoTriggerMonPortEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A row in the failover trigger table."
    INDEX       { failoverInfoTriggerMonId, failoverInfoTriggerMonPortId }
    ::= { failoverInfoMonPortStateTable 1 }

FailoverInfoTriggerMonPortEntry ::= SEQUENCE {
    failoverInfoTriggerMonId                   Integer32,
    failoverInfoTriggerMonPortId            PortNumber,
    failoverInfoTriggerMonPortStatus        INTEGER
    }

failoverInfoTriggerMonId   OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The trigger identifier."
    ::= { failoverInfoTriggerMonPortEntry 1 }

failoverInfoTriggerMonPortId    OBJECT-TYPE
    SYNTAX  PortNumber
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The Port identifier."
    ::= { failoverInfoTriggerMonPortEntry 2 }

failoverInfoTriggerMonPortStatus    OBJECT-TYPE
    SYNTAX  INTEGER{
        failed(0),
        operational(1)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The Port Status."
    ::= { failoverInfoTriggerMonPortEntry 3 }


failoverInfoCtlPortStateTable    OBJECT-TYPE
    SYNTAX      SEQUENCE OF FailoverInfoTriggerCtlPortEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "This table holds the information for individual triggers"
    ::= { failoverInfo 5 }

failoverInfoTriggerCtlPortEntry   OBJECT-TYPE
    SYNTAX      FailoverInfoTriggerCtlPortEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A row in the failover trigger table."
    INDEX       { failoverInfoTriggerCtlId, failoverInfoTriggerCtlPortId }
    ::= { failoverInfoCtlPortStateTable 1 }

FailoverInfoTriggerCtlPortEntry ::= SEQUENCE {
    failoverInfoTriggerCtlId                   Integer32,
    failoverInfoTriggerCtlPortId            PortNumber,
    failoverInfoTriggerCtlPortStatus        INTEGER
    }

failoverInfoTriggerCtlId   OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The trigger identifier."
    ::= { failoverInfoTriggerCtlPortEntry 1 }

failoverInfoTriggerCtlPortId    OBJECT-TYPE
    SYNTAX  PortNumber
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The Port identifier."
    ::= { failoverInfoTriggerCtlPortEntry 2 }

failoverInfoTriggerCtlPortStatus    OBJECT-TYPE
    SYNTAX  INTEGER{
        failed(0),
        operational(1)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The Port Status."
    ::= { failoverInfoTriggerCtlPortEntry 3 }

-- ----------------------------------------------------------------------------
-- } INSERT:  failoverInfo
-- ----------------------------------------------------------------------------

vlagInfo           OBJECT IDENTIFIER ::= { layer2Info 16 }
vlagInfoSystem     OBJECT IDENTIFIER ::= { vlagInfo 1 }
vlagInfoGroup      OBJECT IDENTIFIER ::= { vlagInfo 2 }
vlagInfoIslGroup   OBJECT IDENTIFIER ::= { vlagInfoGroup 2 }

ecpInfo            OBJECT IDENTIFIER ::= { layer2Info 17 }

-- VLAN group
vlanMaxEnt OBJECT-TYPE
    SYNTAX  Integer32 
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The maximum number of rows in the VLAN configuration table."
    ::= { vlan 1 }

vlanMaxVlanID OBJECT-TYPE
    SYNTAX  Integer32 
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The maximum allowed VLAN ID."
    ::= { vlan 4 }

vlanCurCfgTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF VlanCurCfgTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table of VLAN configuration."
    ::= { vlan 2 }

vlanCurCfgTableEntry OBJECT-TYPE
    SYNTAX  VlanCurCfgTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A row in the VLAN configuration table."
    INDEX  { vlanCurCfgVlanId }
    ::= { vlanCurCfgTable 1 }

VlanCurCfgTableEntry ::= SEQUENCE {
    vlanCurCfgVlanId 		Integer32,
    vlanCurCfgPorts 		OCTET STRING,
    vlanCurCfgState 		INTEGER,
    vlanCurCfgStg  	        Integer32,
    vlanCurCfgPrVlanType	INTEGER,
    vlanCurCfgPrVlanMapPriId 	Integer32,
    vlanCurCfgPrVlanState	INTEGER,
    vlanCurCfgVlanName 		DisplayString
    }

vlanCurCfgVlanId OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The VLAN identifier."
    ::= { vlanCurCfgTableEntry 1 }

vlanCurCfgPorts	OBJECT-TYPE
    SYNTAX  OCTET STRING
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The port list in the VLAN. The ports are presented in bitmap format.
	 in receiving order:

	     OCTET 1  OCTET 2  .....
             xxxxxxxx xxxxxxxx ..... 
             ||    || |_ port 8
             ||    ||  
             ||    ||___ port 7
             ||    |____ port 6
             ||      .    .   .
             ||_________ port 1
             |__________ reserved

         where x : 1 - The represented port belongs to the VLAN
		   0 - The represented port does not belong to the VLAN"
    ::= { vlanCurCfgTableEntry 2 }

vlanCurCfgState	OBJECT-TYPE
    SYNTAX  INTEGER  {
	enabled(2),
	disabled(3)
	}
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable a VLAN"
    ::= { vlanCurCfgTableEntry 3 }


vlanCurCfgStg OBJECT-TYPE
    SYNTAX  Integer32  
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The Spanning Tree Group for the VLAN."
    ::= { vlanCurCfgTableEntry 5 }




vlanCurCfgVlanName OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..32))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The VLAN name."
    ::= { vlanCurCfgTableEntry 9 }

vlanCurCfgPrVlanType OBJECT-TYPE
    SYNTAX  INTEGER{
        none(0),
        primary(1),
        isolated(2),
        community(3)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The type of the Private VLAN."
    ::= { vlanCurCfgTableEntry 10 }

vlanCurCfgPrVlanMapPriId OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The primary vlan id"
    ::= { vlanCurCfgTableEntry 11 }

vlanCurCfgPrVlanState OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(0)
    }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable a Private VLAN."
    ::= { vlanCurCfgTableEntry 12 }





vlanNewCfgTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF VlanNewCfgTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table of VLAN configuration."
    ::= { vlan 3 }

vlanNewCfgTableEntry OBJECT-TYPE
    SYNTAX  VlanNewCfgTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A row in the VLAN configuration table."
    INDEX  { vlanNewCfgVlanId }
    ::= { vlanNewCfgTable 1 }

VlanNewCfgTableEntry ::= SEQUENCE {
    vlanNewCfgVlanId 		Integer32,
    vlanNewCfgVlanName 		DisplayString,
    vlanNewCfgPorts 		OCTET STRING,
    vlanNewCfgState 		INTEGER,
    vlanNewCfgAddPort 		PortNumber,
    vlanNewCfgRemovePort	PortNumber,
    vlanNewCfgStg  	        Integer32,
    vlanNewCfgPrVlanType	INTEGER,
    vlanNewCfgPrVlanMapPriId 	Integer32,
    vlanNewCfgPrVlanState	INTEGER,
    vlanNewCfgDelete 		INTEGER
    }

vlanNewCfgVlanId OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The VLAN identifier."
    ::= { vlanNewCfgTableEntry 1 }

vlanNewCfgVlanName OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..32))
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "The VLAN name."
    ::= { vlanNewCfgTableEntry 2 }

vlanNewCfgPorts	OBJECT-TYPE
    SYNTAX  OCTET STRING
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The port list in the VLAN.  The ports are presented in bitmap format.
         in receiving order:

	     OCTET 1  OCTET 2  .....
             xxxxxxxx xxxxxxxx ..... 
             ||    || |_ port 8
             ||    ||  
             ||    ||___ port 7
             ||    |____ port 6
             ||      .    .   .
             ||_________ port 1
             |__________ reserved

         where x : 1 - The represented port belongs to the VLAN
	           0 - The represented port does not belong to the VLAN"
    ::= { vlanNewCfgTableEntry 3 }

vlanNewCfgState	OBJECT-TYPE
    SYNTAX  INTEGER  {
	enabled(2),
	disabled(3)
	}
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "Enable or disable a VLAN"
    ::= { vlanNewCfgTableEntry 4 }

vlanNewCfgAddPort OBJECT-TYPE
    SYNTAX  PortNumber
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "The port to be added to the specified VLAN.  A '0' value is 
         returned when read."
    ::= { vlanNewCfgTableEntry 5 }

vlanNewCfgRemovePort OBJECT-TYPE
    SYNTAX  PortNumber
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "The port to be removed from the specified VLAN.  A '0'
         value is returned when read."
    ::= { vlanNewCfgTableEntry 6 }

vlanNewCfgDelete OBJECT-TYPE
    SYNTAX  INTEGER  {
        other(1),
        delete(2)
        }
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "This is an action object to create or delete a VLAN.
         other(1) is returned always when read.
         The following values are writable: delete(2)...to delete a VLAN"
    ::= { vlanNewCfgTableEntry 7 }


vlanNewCfgStg OBJECT-TYPE
    SYNTAX  Integer32  
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "The Spanning Tree Group for the VLAN."
    ::= { vlanNewCfgTableEntry 9 }




vlanNewCfgPrVlanType OBJECT-TYPE
    SYNTAX  INTEGER{
        none(0),
        primary(1),
        isolated(2),
        community(3)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The type of the Private VLAN."
    ::= { vlanNewCfgTableEntry 13 }

vlanNewCfgPrVlanMapPriId OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The primary vlan id. To delete set 0."
    ::= { vlanNewCfgTableEntry 14 }

vlanNewCfgPrVlanState OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(0)
    }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable or disable a Private VLAN."
    ::= { vlanNewCfgTableEntry 15 }







-- Link Aggregation Control Protocol Group
lacpCurSystemPriority OBJECT-TYPE
    SYNTAX  INTEGER (1..65535)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
       "A 2-octet read-write value indicating the priority
        value associated with the Actor's System ID."
    ::= { lacp 1 }

lacpNewSystemPriority OBJECT-TYPE
    SYNTAX  INTEGER (1..65535)
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
       "A 2-octet read-write value indicating the priority
        value associated with the Actor's System ID."
    ::= { lacp 2 }

lacpCurSystemTimeoutTime OBJECT-TYPE
    SYNTAX  INTEGER  {
        short(3),
        long(90)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "If a port does not receive LACPDUs for Timeout time LACP 
         information pertaining to the port is invalidated.
         Its every 3 sec (short) and every 90 sec (long 3)."
    ::= { lacp 5 }

lacpNewSystemTimeoutTime OBJECT-TYPE
    SYNTAX  INTEGER  {
        short(3),
        long(90)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "If a port does not receive LACPDUs for Timeout time LACP 
         information pertaining to the port is invalidated.
         Its every 3 sec (short) and every 90 sec (long 3)."
    ::= { lacp 6 }

lacpCurPortCfgTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF LacpCurPortCfgTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table of LACP port configuration."
    ::= { lacp 7 }

lacpCurPortCfgTableEntry OBJECT-TYPE
    SYNTAX  LacpCurPortCfgTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A row in the LACP port configuration table."
    INDEX  { lacpCurPortCfgTableId }
    ::= { lacpCurPortCfgTable 1 }

LacpCurPortCfgTableEntry ::= SEQUENCE {
    lacpCurPortCfgTableId 	    PortNumber,
    lacpCurPortState                INTEGER, 
    lacpCurPortActorPortPriority    INTEGER, 
    lacpCurPortActorAdminKey        INTEGER,
    lacpCurPortActorMinLinks        INTEGER
    }

lacpCurPortCfgTableId OBJECT-TYPE
    SYNTAX PortNumber
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
          " LACP port number."
    ::= { lacpCurPortCfgTableEntry 1 }

lacpCurPortState OBJECT-TYPE
    SYNTAX  INTEGER  {
        off(1),
        active(2),
        passive(3)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "LACP port state can be one of three states 
         off (Not participating in LACP) 
         Active (Initiates LACPDU updates)
         Passive (Does not initiate LACPDU updates but responds to peer."
    ::= { lacpCurPortCfgTableEntry 2 }

lacpCurPortActorPortPriority OBJECT-TYPE
    SYNTAX       INTEGER (1..65535)
    MAX-ACCESS       read-only
    STATUS       current
    DESCRIPTION
        "The priority value assigned to this Aggregation Port.
        This 16-bit value is read-only."
    ::= { lacpCurPortCfgTableEntry 3 }

lacpCurPortActorAdminKey OBJECT-TYPE
    SYNTAX       INTEGER (1..65535)
    MAX-ACCESS       read-only
    STATUS       current
    DESCRIPTION
        "The current administrative value of the Key for the
        Aggregation Port. This is a 16-bit read-only value.
        The meaning of particular Key values is of local
        significance."
    ::= { lacpCurPortCfgTableEntry 4 }

lacpCurPortActorMinLinks OBJECT-TYPE
    SYNTAX       INTEGER (1..12)
    MAX-ACCESS       read-only
    STATUS       current
    DESCRIPTION
    "The current minimum links for the Aggregation Port. 
    This is a 16-bit read-only value. The meaning of 
    particular Key values is of local significance."
    ::= { lacpCurPortCfgTableEntry 5 }
lacpNewPortCfgTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF LacpNewPortCfgTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table of LACP port configuration."
    ::= { lacp 8 }

lacpNewPortCfgTableEntry OBJECT-TYPE
    SYNTAX  LacpNewPortCfgTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A row in the LACP port configuration table."
    INDEX  { lacpNewPortCfgTableId }
    ::= { lacpNewPortCfgTable 1 }

LacpNewPortCfgTableEntry ::= SEQUENCE {
    lacpNewPortCfgTableId 	    PortNumber,
    lacpNewPortState                INTEGER, 
    lacpNewPortActorPortPriority    INTEGER, 
    lacpNewPortActorAdminKey        INTEGER,
    lacpNewPortActorMinLinks        INTEGER,
    lacpNewPortSetToDefault         INTEGER
    }

lacpNewPortCfgTableId OBJECT-TYPE
    SYNTAX PortNumber
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
          " LACP port number."
    ::= { lacpNewPortCfgTableEntry 1 }

lacpNewPortState OBJECT-TYPE
    SYNTAX  INTEGER  {
        off(1),
        active(2),
        passive(3)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "LACP port state can be one of three states 
         off (Not participating in LACP) 
         Active (Initiates LACPDU updates)
         Passive (Does not initiate LACPDU updates but responds to peer."
    ::= { lacpNewPortCfgTableEntry 2 }

lacpNewPortActorPortPriority OBJECT-TYPE
    SYNTAX       INTEGER (1..65535)
    MAX-ACCESS       read-write
    STATUS       current
    DESCRIPTION
        "The priority value assigned to this Aggregation Port.
        This 16-bit value is read-write."
    ::= { lacpNewPortCfgTableEntry 3 }

lacpNewPortActorAdminKey OBJECT-TYPE
    SYNTAX       INTEGER (1..65535)
    MAX-ACCESS       read-write
    STATUS       current
    DESCRIPTION
        "The current administrative value of the Key for the
        Aggregation Port. This is a 16-bit read-write value.
        The meaning of particular Key values is of local
        significance."
    ::= { lacpNewPortCfgTableEntry 4 }

lacpNewPortActorMinLinks OBJECT-TYPE
    SYNTAX       INTEGER (1..12)
    MAX-ACCESS       read-write
    STATUS       current
    DESCRIPTION
        "The current minimum links for the Aggregation Port. 
        This is a 16-bit read-write value. The meaning of 
        particular Key values is of local significance."
    ::= { lacpNewPortCfgTableEntry 5 }
lacpNewPortSetToDefault OBJECT-TYPE
    SYNTAX  INTEGER  {
        none(1),
        setDefault(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "When read, always returns none(1). 
         When setting setDefault(2) value, the LACP port settings 
         are set to the default values."
    ::= { lacpNewPortCfgTableEntry 6 }
    
lacpDeleteTrunk OBJECT-TYPE
    SYNTAX       INTEGER (1..65535)
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "Delete a trunk with specified admin key"
    ::= { lacp 9 }    

lacpNewSystemSetToDefault OBJECT-TYPE
    SYNTAX  INTEGER  {
        none(1),
        setDefault(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "When read, always returns none(1).
         When setting setDefault(2) value, the LACP system settings
         are set to the default values."
    ::= { lacp 10 }
    

-- Trunk Group Group
trunkGroupTableMaxSize OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The maximum number of entries in trunk group table."
    ::= { trunkgroup 1 }

trunkGroupCurCfgTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF TrunkGroupCurCfgTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table of trunk group configuration."
    ::= { trunkgroup 2 }

trunkGroupCurCfgTableEntry OBJECT-TYPE
    SYNTAX  TrunkGroupCurCfgTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A row in the trunk group configuration table."
    INDEX   { trunkGroupCurCfgIndex }
    ::= { trunkGroupCurCfgTable 1 }

TrunkGroupCurCfgTableEntry ::= SEQUENCE {
    trunkGroupCurCfgIndex         Integer32,
    trunkGroupCurCfgPorts         OCTET STRING,
    trunkGroupCurCfgState         INTEGER
    }
 
trunkGroupCurCfgIndex OBJECT-TYPE
    SYNTAX  Integer32  
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The identifier of the trunk group."
    ::= { trunkGroupCurCfgTableEntry 1 }
 
trunkGroupCurCfgPorts OBJECT-TYPE
    SYNTAX  OCTET STRING
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The port list in the trunk group. The ports are presented in 
         bitmap format.
 
         in receiving order:
 
             OCTET 1  OCTET 2  .....
             xxxxxxxx xxxxxxxx ..... 
             ||    || |_ port 8
             ||    ||  
             ||    ||___ port 7
             ||    |____ port 6
             ||      .    .   .
             ||_________ port 1
             |__________ reserved

         where x : 1 - The represented port belongs to the trunk group
                   0 - The represented port does not belong to the trunk group"
    ::= { trunkGroupCurCfgTableEntry 2 }
 
trunkGroupCurCfgState OBJECT-TYPE
    SYNTAX  INTEGER  {
        enable(1),
        disable(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable a trunk group."
    ::= { trunkGroupCurCfgTableEntry 3 }
 
 




trunkGroupNewCfgTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF TrunkGroupNewCfgTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table of trunk group configuration."
    ::= { trunkgroup 3 }

trunkGroupNewCfgTableEntry OBJECT-TYPE
    SYNTAX  TrunkGroupNewCfgTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A row in the trunk group configuration table."
    INDEX   { trunkGroupNewCfgIndex }
    ::= { trunkGroupNewCfgTable 1 }

TrunkGroupNewCfgTableEntry ::= SEQUENCE {
    trunkGroupNewCfgIndex          Integer32,
    trunkGroupNewCfgPorts          OCTET STRING,
    trunkGroupNewCfgAddPort        PortNumber,
    trunkGroupNewCfgRemovePort     PortNumber,
    trunkGroupNewCfgState          INTEGER,
    trunkGroupNewCfgDelete         INTEGER
    }
 
trunkGroupNewCfgIndex OBJECT-TYPE
    SYNTAX  Integer32  
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The identifier of the trunk group."
    ::= { trunkGroupNewCfgTableEntry 1 }
 
trunkGroupNewCfgPorts OBJECT-TYPE
    SYNTAX  OCTET STRING
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The port list in the trunk group.  The ports are presented
         in bitmap format.

         in receiving order:

             OCTET 1  OCTET 2  .....
             xxxxxxxx xxxxxxxx ..... 
             ||    || |_ port 8
             ||    ||  
             ||    ||___ port 7
             ||    |____ port 6
             ||      .    .   .
             ||_________ port 1
             |__________ reserved
 
         where x : 1 - The represented port belongs to the trunk group
                   0 - The represented port does not belong to the trunk group"
    ::= { trunkGroupNewCfgTableEntry 2 }
 
trunkGroupNewCfgAddPort OBJECT-TYPE
    SYNTAX  PortNumber
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "The port to be added in the trunk group. When read, 0 is returned."
    ::= { trunkGroupNewCfgTableEntry 3 }

trunkGroupNewCfgRemovePort OBJECT-TYPE
    SYNTAX  PortNumber
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "The port to be deleted from the trunk group. when read, 0
	 is returned."
    ::= { trunkGroupNewCfgTableEntry 4 }

trunkGroupNewCfgState OBJECT-TYPE
    SYNTAX  INTEGER  {
        enable(1),
        disable(2)
        }
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "Enable or disable a trunk group."
    ::= { trunkGroupNewCfgTableEntry 5 }
 
trunkGroupNewCfgDelete OBJECT-TYPE
    SYNTAX  INTEGER  {
        other(1),
        delete(2)
        }
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "Setting the value to delete(2) will delete the entire
         row. When read, other(1) is returned."
    ::= { trunkGroupNewCfgTableEntry 6 }




trunkLacpGroupTableMaxSize OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The maximum number of entries in LACP trunk group table."
    ::= { trunkgroup 4 }

trunkLacpGroupCurCfgTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF TrunkLacpGroupCurCfgTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table of LACP trunk group configuration."
    ::= { trunkgroup 5 }

trunkLacpGroupCurCfgTableEntry OBJECT-TYPE
    SYNTAX  TrunkLacpGroupCurCfgTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A row in the LACP trunk group configuration table."
    INDEX   { trunkLacpGroupCurCfgIndex }
    ::= { trunkLacpGroupCurCfgTable 1 }

TrunkLacpGroupCurCfgTableEntry ::= SEQUENCE {
    trunkLacpGroupCurCfgIndex         Integer32,
    trunkLacpGroupCurCfgAdminKey      Integer32
    }
 
trunkLacpGroupCurCfgIndex OBJECT-TYPE
    SYNTAX  Integer32  
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The identifier of the LACP trunk group."
    ::= { trunkLacpGroupCurCfgTableEntry 1 }
 
trunkLacpGroupCurCfgAdminKey OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The administrative key of the LACP trunk group. Ports
        whose LACP key is same will be member ports of the trunk."
    ::= { trunkLacpGroupCurCfgTableEntry 2 }
 

trunkLacpGroupNewCfgTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF TrunkLacpGroupNewCfgTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table of LACP trunk group configuration."
    ::= { trunkgroup 6 }

trunkLacpGroupNewCfgTableEntry OBJECT-TYPE
    SYNTAX  TrunkLacpGroupNewCfgTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A row in the LACP trunk group configuration table."
    INDEX   { trunkLacpGroupNewCfgIndex }
    ::= { trunkLacpGroupNewCfgTable 1 }

TrunkLacpGroupNewCfgTableEntry ::= SEQUENCE {
    trunkLacpGroupNewCfgIndex          Integer32,
    trunkLacpGroupNewCfgAdminKey       Integer32
    }
 
trunkLacpGroupNewCfgIndex OBJECT-TYPE
    SYNTAX  Integer32  
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The identifier of the LACP trunk group."
    ::= { trunkLacpGroupNewCfgTableEntry 1 }
 
trunkLacpGroupNewCfgAdminKey OBJECT-TYPE
    SYNTAX  Integer32 (0..65535)
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The administrative key of the LACP trunk group. Ports
        whose LACP key is same will be member ports of the trunk.
        Value 0 means LACP trunk group deletion."
    ::= { trunkLacpGroupNewCfgTableEntry 2 }


-- Elmo trunk hash
l2ThashCurCfgSmacState OBJECT-TYPE
    SYNTAX  INTEGER  {
        enable(1),
        disable(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable smac hash."
    ::= { thashL2 1 }

l2ThashNewCfgSmacState OBJECT-TYPE
    SYNTAX  INTEGER  {
        enable(1),
        disable(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable or disable smac hash."
    ::= { thashL2 2 }

l2ThashCurCfgDmacState OBJECT-TYPE
    SYNTAX  INTEGER  {
        enable(1),
        disable(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable dmac hash."
    ::= { thashL2 3 }

l2ThashNewCfgDmacState OBJECT-TYPE
    SYNTAX  INTEGER  {
        enable(1),
        disable(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable or disable dmac hash."
    ::= { thashL2 4 }

l2ThashCurCfgSipState OBJECT-TYPE
    SYNTAX  INTEGER  {
        enable(1),
        disable(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable sip hash."
    ::= { thashL2 5 }

l2ThashNewCfgSipState OBJECT-TYPE
    SYNTAX  INTEGER  {
        enable(1),
        disable(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable or disable sip hash."
    ::= { thashL2 6 }

l2ThashCurCfgDipState OBJECT-TYPE
    SYNTAX  INTEGER  {
        enable(1),
        disable(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable dip hash."
    ::= { thashL2 7 }

l2ThashNewCfgDipState OBJECT-TYPE
    SYNTAX  INTEGER  {
        enable(1),
        disable(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable or disable dip hash."
    ::= { thashL2 8 }







-- Spanning Tree Group Configuration
-- This group specifies the additional configurations that are not
-- covered by the Bridge MIB (RFC 1493).
-- The relative Spanning Tree information can be retrieved or configured
-- using Bridge MIB with an unique community string for each group specified
-- in entLogicalTable of Entity MIB (RFC 2037).
--
stgCurCfgTable OBJECT-TYPE
    SYNTAX SEQUENCE OF StgCurCfgTableEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The table of Spanning Tree Group configuration."
    ::= { stgCfg 1 }

stgCurCfgTableEntry OBJECT-TYPE
    SYNTAX StgCurCfgTableEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Information about a particular Spanning Tree Group configuration."
    INDEX { stgCurCfgIndex }
    ::= { stgCurCfgTable 1 }

StgCurCfgTableEntry ::= SEQUENCE {
    stgCurCfgIndex           Integer32,
    stgCurCfgState           INTEGER,
    stgCurCfgPriority        INTEGER,
    stgCurCfgBrgHelloTime    INTEGER,
    stgCurCfgBrgForwardDelay INTEGER,
    stgCurCfgBrgMaxAge       INTEGER,
    stgCurCfgVlanBmap        OCTET STRING
    }

stgCurCfgIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The identifier of a particular Spanning Tree Group.  This is also
         index to the entLogicalTable of Entity MIB."
    ::= { stgCurCfgTableEntry 1 }

stgCurCfgState OBJECT-TYPE
    SYNTAX INTEGER {
        on(1),
        off(2)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Turn on of off Spanning Tree operation of a particular Spanning
         Tree Group."
    ::= { stgCurCfgTableEntry 2 }


stgCurCfgPriority OBJECT-TYPE
    SYNTAX  INTEGER (0..65535)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The value of the write-able portion of the Bridge ID, i.e., the first
         two octets of the (8 octet long) Bridge ID."
    ::= { stgCurCfgTableEntry 5 }

stgCurCfgBrgHelloTime OBJECT-TYPE
    SYNTAX  INTEGER (1..10)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The value in seconds that all bridges use for HelloTime when this 
         bridge is acting as the root."
    ::= { stgCurCfgTableEntry 6 }

stgCurCfgBrgForwardDelay OBJECT-TYPE
    SYNTAX  INTEGER (4..30)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The value in seconds that all bridges use for ForwardDelay when this 
         bridge is acting as the root."
    ::= { stgCurCfgTableEntry 7 }

stgCurCfgBrgMaxAge OBJECT-TYPE
    SYNTAX  INTEGER (6..40)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The value in seconds that all bridges use for MaxAge when this bridge
         is acting as the root."
    ::= { stgCurCfgTableEntry 8 }

stgCurCfgVlanBmap OBJECT-TYPE
    SYNTAX  OCTET STRING (SIZE(0..512)) 
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
	"The vlans applied to the spanning tree group.  The vlans are 
         presented in bitmap format. This string displays vlan number
	 from 1 to 4096.

	 in receiving order:

	     OCTET 1  OCTET 2  .....
             xxxxxxxx xxxxxxxx ..... 
             ||    || |_ vlan 9
             ||    ||  
             ||    ||___ vlan 8
             ||    |____ vlan 7
             ||      .    .   .
             ||_________ vlan 2
             |__________ vlan 1 (as index to stgCurCfgTable)

         where x : 1 - The represented vlan applied to the spanning tree. 
		   0 - The represented vlan not applied to the spanning tree"
    ::= { stgCurCfgTableEntry 10 }


stgNewCfgTable OBJECT-TYPE
    SYNTAX SEQUENCE OF StgNewCfgTableEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The table of Spanning Tree Groups configuration in the new_config."
    ::= { stgCfg 2 }

stgNewCfgTableEntry OBJECT-TYPE
    SYNTAX StgNewCfgTableEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Information about a particular Spanning Tree Group configuration."
    INDEX { stgNewCfgIndex }
    ::= { stgNewCfgTable 1 }

StgNewCfgTableEntry ::= SEQUENCE {
    stgNewCfgIndex           Integer32,
    stgNewCfgState           INTEGER,
    stgNewCfgDefaultCfg      INTEGER,
    stgNewCfgAddVlan         Integer32,
    stgNewCfgRemoveVlan      Integer32,
    stgNewCfgPriority        INTEGER,
    stgNewCfgBrgHelloTime    INTEGER,
    stgNewCfgBrgForwardDelay INTEGER,
    stgNewCfgBrgMaxAge       INTEGER,
    stgNewCfgVlanBmap        OCTET STRING,
    stgNewCfgRemoveAllVlan   INTEGER
    }

stgNewCfgIndex  OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The identifier of a particular Spanning Tree Group.  This is also
         index to the entLogicalTable of Entity MIB."
    ::= { stgNewCfgTableEntry 1 }

stgNewCfgState OBJECT-TYPE
    SYNTAX INTEGER {
        on(1),
        off(2)
        }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Turn on of off Spanning Tree operation of a particular Spanning
         Tree Group."
    ::= { stgNewCfgTableEntry 2 }

stgNewCfgDefaultCfg OBJECT-TYPE
    SYNTAX INTEGER {
        default-config(1)
        }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Setting the value to default-config(1) will set the default
         configuration as recommended by IEEE 802.1D for a particular
         Spanning Tree Group.  default-config (1) is always returned 
	 When read, but it does not mean anything."
    ::= { stgNewCfgTableEntry 3 }

stgNewCfgAddVlan OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The vlan to be added to the specified Spanning Tree Group.  A 
         '0' value is returned when read." 
    ::= {stgNewCfgTableEntry 4 }

stgNewCfgRemoveVlan OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The vlan to be removed from the specified Spanning Tree Group.
         A '0' value is returned when read."
    ::= { stgNewCfgTableEntry 5 }


stgNewCfgPriority OBJECT-TYPE
    SYNTAX  INTEGER (0..65535)
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The value of the write-able portion of the Bridge ID, i.e., the first
         two octets of the (8 octet long) Bridge ID."
    ::= { stgNewCfgTableEntry 8 }

stgNewCfgBrgHelloTime OBJECT-TYPE
    SYNTAX  INTEGER (1..10)
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The value in seconds that all bridges use for HelloTime when this 
         bridge is acting as the root."
    ::= { stgNewCfgTableEntry 9 }

stgNewCfgBrgForwardDelay OBJECT-TYPE
    SYNTAX  INTEGER (4..30)
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The value in seconds that all bridges use for ForwardDelay when this 
         bridge is acting as the root."
    ::= { stgNewCfgTableEntry 10 }

stgNewCfgBrgMaxAge OBJECT-TYPE
    SYNTAX  INTEGER (6..40)
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The value in seconds that all bridges use for MaxAge when this bridge
         is acting as the root."
    ::= { stgNewCfgTableEntry 11 }

stgNewCfgVlanBmap OBJECT-TYPE
    SYNTAX  OCTET STRING (SIZE(0..512)) 
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
	"The vlans applied to the spanning tree group.  The vlans are 
         presented in bitmap format. This string displays vlan number
	 from 1 to 4096.

	 in receiving order:

	     OCTET 1  OCTET 2  .....
             xxxxxxxx xxxxxxxx ..... 
             ||    || |_ vlan 9
             ||    ||  
             ||    ||___ vlan 8
             ||    |____ vlan 7
             ||      .    .   .
             ||_________ vlan 2
             |__________ vlan 1 (as index to stgCurCfgTable)

         where x : 1 - The represented vlan applied to the spanning tree. 
		   0 - The represented vlan not applied to the spanning tree"
    ::= { stgNewCfgTableEntry 13 }

stgNewCfgRemoveAllVlan OBJECT-TYPE
    SYNTAX INTEGER {
        default-config(1)
        }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The all vlans to be removed from the specified Spanning Tree Group.
         A '0' value is returned when read."
    ::= { stgNewCfgTableEntry 14 }


stgCurCfgPortTable OBJECT-TYPE
    SYNTAX SEQUENCE OF StgCurCfgPortTableEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The table of Spanning Tree Group port configuration in the
         current_config."
    ::= { stgCfg 3 }

stgCurCfgPortTableEntry OBJECT-TYPE
    SYNTAX StgCurCfgPortTableEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Information about port configuration of a particular Spanning Tree
         Group."
    INDEX { stgCurCfgStgIndex, stgCurCfgPortIndex }
    ::= { stgCurCfgPortTable 1 }

StgCurCfgPortTableEntry ::= SEQUENCE {
    stgCurCfgStgIndex      Integer32,
    stgCurCfgPortIndex     PortNumber,
    stgCurCfgPortPriority  INTEGER,
    stgCurCfgPortPathCost  Integer32,
    stgCurCfgPortState     INTEGER
    }

stgCurCfgStgIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The identifier of a particular Spanning Tree Group.  This is also
         index to the entLogicalTable of Entity MIB."
    ::= { stgCurCfgPortTableEntry 1 }

stgCurCfgPortIndex OBJECT-TYPE
    SYNTAX PortNumber
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The port identifier of a particular Spanning Tree Group."
    ::= { stgCurCfgPortTableEntry 2 }

stgCurCfgPortState OBJECT-TYPE
    SYNTAX INTEGER {
        on(1),
        off(2)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Turn on of off Spanning Tree operation of a particular port of a
         Spanning Tree Group."
    ::= { stgCurCfgPortTableEntry 3 }

stgCurCfgPortPriority OBJECT-TYPE
    SYNTAX INTEGER (0..240)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The value of the priority field which is contained in the first 
         (in network byte order) octet of the (2 octet long) Port ID."
    ::= { stgCurCfgPortTableEntry 4 }

stgCurCfgPortPathCost OBJECT-TYPE
    SYNTAX Integer32 
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
       "The contribution of this port to the path cost of paths towards the 
        spanning tree root which include this port (
        range is (0..200000000) )."
    ::= { stgCurCfgPortTableEntry 5 }



stgNewCfgPortTable OBJECT-TYPE
    SYNTAX SEQUENCE OF StgNewCfgPortTableEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The table of Spanning Tree Group port configuration in the
         new_config."
    ::= { stgCfg 4 }

stgNewCfgPortTableEntry OBJECT-TYPE
    SYNTAX StgNewCfgPortTableEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Information about port configuration of a particular Spanning Tree
         Group."
    INDEX { stgNewCfgStgIndex, stgNewCfgPortIndex }
    ::= { stgNewCfgPortTable 1 }

StgNewCfgPortTableEntry ::= SEQUENCE {
    stgNewCfgStgIndex      Integer32,
    stgNewCfgPortIndex     PortNumber,
    stgNewCfgPortPriority  INTEGER,
    stgNewCfgPortPathCost  Integer32,
    stgNewCfgPortState     INTEGER
    }

stgNewCfgStgIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The identifier of a particular Spanning Tree Group.  This is also
         index to the entLogicalTable of Entity MIB."
    ::= { stgNewCfgPortTableEntry 1 }

stgNewCfgPortIndex OBJECT-TYPE
    SYNTAX PortNumber
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The port identifier of a particular Spanning Tree Group."
    ::= { stgNewCfgPortTableEntry 2 }

stgNewCfgPortState OBJECT-TYPE
    SYNTAX INTEGER {
        on(1),
        off(2)
        }
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "Turn on of off Spanning Tree operation of a particular port of a
         Spanning Tree Group."
    ::= { stgNewCfgPortTableEntry 3 }

stgNewCfgPortPriority OBJECT-TYPE
    SYNTAX INTEGER (0..240)
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "The value of the priority field which is contained in the first 
         (in network byte order) octet of the (2 octet long) Port ID."
    ::= { stgNewCfgPortTableEntry 4 }

stgNewCfgPortPathCost OBJECT-TYPE
    SYNTAX  Integer32 
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
       "The contribution of this port to the path cost of paths towards the 
        spanning tree root which include this port (
        range is (0..200000000) )."
    ::= { stgNewCfgPortTableEntry 5 }



    

-- Complete Port Mirroring 
pmCurCfgPortMirrState OBJECT-TYPE
    SYNTAX  INTEGER {
	enabled(1),
	disabled(2)
	}
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The state of port-based port mirroring."
    ::= { mirrPortMirr 1 }
 
pmNewCfgPortMirrState OBJECT-TYPE
    SYNTAX  INTEGER {
	enabled(1),
	disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The state of port-based port mirroring."
    ::= { mirrPortMirr 2 }

pmCurCfgPortMonitorTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF PmCurCfgPortMonitorEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table of monitoring ports."
    ::= { mirrPortMirr 3 }

pmCurCfgPortMonitorEntry OBJECT-TYPE
    SYNTAX  PmCurCfgPortMonitorEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A row in the monitoring port table."
    INDEX   { pmCurCfgPmirrMoniPortIndex, pmCurCfgPmirrMirrPortIndex }
    ::= { pmCurCfgPortMonitorTable 1 }

PmCurCfgPortMonitorEntry ::= SEQUENCE {
    pmCurCfgPmirrMoniPortIndex       PortNumber,
    pmCurCfgPmirrMirrPortIndex       PortNumber,
    pmCurCfgPmirrDirection           INTEGER
    }

pmCurCfgPmirrMoniPortIndex OBJECT-TYPE
    SYNTAX  PortNumber
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The monitoring port number." 
    ::= { pmCurCfgPortMonitorEntry 1 }

pmCurCfgPmirrMirrPortIndex OBJECT-TYPE 
    SYNTAX  PortNumber
    MAX-ACCESS  read-only 
    STATUS  current 
    DESCRIPTION 
        "The mirrored port number" 
    ::= { pmCurCfgPortMonitorEntry 2 }

pmCurCfgPmirrDirection OBJECT-TYPE
    SYNTAX  INTEGER {
	in(1),
	out(2),
	both(3)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The type of traffic to be monitored with respect to the
         mirrored port."
    ::= { pmCurCfgPortMonitorEntry 3 }

pmNewCfgPortMonitorTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF PmNewCfgPortMonitorEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table of monitoring ports."
    ::= { mirrPortMirr 4 }

pmNewCfgPortMonitorEntry OBJECT-TYPE
    SYNTAX  PmNewCfgPortMonitorEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A row in the monitoring port table."
    INDEX   { pmNewCfgPmirrMoniPortIndex, pmNewCfgPmirrMirrPortIndex }
    ::= { pmNewCfgPortMonitorTable 1 }

PmNewCfgPortMonitorEntry ::= SEQUENCE {
    pmNewCfgPmirrMoniPortIndex          PortNumber,
    pmNewCfgPmirrMirrPortIndex          PortNumber,
    pmNewCfgPmirrDirection              INTEGER,
    pmNewCfgPmirrDelete                 INTEGER,
    pmNewCfgPmonDelete                 INTEGER
    }

pmNewCfgPmirrMoniPortIndex OBJECT-TYPE
    SYNTAX  PortNumber
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The monitoring port number." 
    ::= { pmNewCfgPortMonitorEntry 1 }

pmNewCfgPmirrMirrPortIndex OBJECT-TYPE 
    SYNTAX  PortNumber 
    MAX-ACCESS  read-only 
    STATUS  current 
    DESCRIPTION 
        "The mirrored port number" 
    ::= { pmNewCfgPortMonitorEntry 2 }

pmNewCfgPmirrDirection OBJECT-TYPE
    SYNTAX  INTEGER {
	in(1),
	out(2),
	both(3)
        }
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "The type of traffic to be monitored with respect to the
         mirrored port."
    ::= { pmNewCfgPortMonitorEntry 3 }

pmNewCfgPmirrDelete OBJECT-TYPE
    SYNTAX  INTEGER  {
        other(1),
        delete(2)
        }
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "Setting the value to delete(2) will delete the entire
         row. When read, other(1) is returned."
    ::= { pmNewCfgPortMonitorEntry 4 }


pmNewCfgPmonDelete OBJECT-TYPE
    SYNTAX  INTEGER  {
        other(1),
        delete(2)
        }
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "Setting the value to delete(2) will delete the monitor
         port. When read, other(1) is returned."
    ::= { pmNewCfgPortMonitorEntry 10 }

-- MST Configuration 


mstCurCfgRegionName OBJECT-TYPE
   SYNTAX  DisplayString (SIZE (0..32))
   MAX-ACCESS  read-only
   STATUS  current
   DESCRIPTION
      "The Name for the Region's configuration."
   ::= { mstGeneralCfg 3 } 

mstNewCfgRegionName OBJECT-TYPE
   SYNTAX  DisplayString (SIZE (0..32))
   MAX-ACCESS  read-write
   STATUS  current
   DESCRIPTION
      "The Name for the Region's configuration."
   ::= { mstGeneralCfg 4 } 

mstCurCfgRegionRevision OBJECT-TYPE
    SYNTAX  INTEGER  (0..65535)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Revision of the MST Region."
    ::= { mstGeneralCfg 5 }

mstNewCfgRegionRevision OBJECT-TYPE
    SYNTAX  INTEGER  (0..65535)
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Revision of the MST Region."
    ::= { mstGeneralCfg 6 }

mstCurCfgMaxHopCount OBJECT-TYPE
    SYNTAX  INTEGER  (4..60)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Indicates the maximum hop count value."
    ::= { mstGeneralCfg 7 }

mstNewCfgMaxHopCount OBJECT-TYPE
    SYNTAX  INTEGER  (4..60)
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Indicates the maximum hop count value."
    ::= { mstGeneralCfg 8 }

mstCurCfgStpMode OBJECT-TYPE
    SYNTAX  INTEGER  {
        mstp(1),
        rstp(2),
        pvrst(3)
    }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The version of Spanning Tree Protocal the bridge is currently 
         running."
    ::= { mstGeneralCfg 9 }

mstNewCfgStpMode OBJECT-TYPE
    SYNTAX  INTEGER  {
        mstp(1),
        rstp(2),
        pvrst(3)
    }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The version of Spanning Tree Protocal the bridge is currently 
         running."
    ::= { mstGeneralCfg 10 }

mstCistDefaultCfg OBJECT-TYPE
    SYNTAX INTEGER {
        default(1)
        }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Setting the value to default(1) will set the Multiple
         Spanning Tree and member parameters to default.  default(1) is 
         always returned when read, but it does not mean anything."
    ::= { mstCistCfg 1 }

-- CIST Brige Configuration
mstCistBridgeCfg  OBJECT IDENTIFIER ::= { mstCistCfg 2 }

mstCistCurCfgBridgePriority OBJECT-TYPE
    SYNTAX  INTEGER  (0..65535)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The value of the writable portion of the Brigde Identifier comprising
         of the first two octets."
    ::= { mstCistBridgeCfg 1 }

mstCistNewCfgBridgePriority OBJECT-TYPE
    SYNTAX  INTEGER  (0..65535)
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The value of the writable portion of the Brigde Identifier comprising
         of the first two octets."
    ::= { mstCistBridgeCfg 2 }


mstCistCurCfgBridgeMaxAge OBJECT-TYPE
    SYNTAX  INTEGER  (6..40)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The value in seconds that all bridges use for MaxAge when this bridge
         is acting as the root."
    ::= { mstCistBridgeCfg 5 }

mstCistNewCfgBridgeMaxAge OBJECT-TYPE
    SYNTAX  INTEGER  (6..40)
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The value in seconds that all bridges use for MaxAge when this bridge
         is acting as the root."
    ::= { mstCistBridgeCfg 6 }

mstCistCurCfgBridgeForwardDelay OBJECT-TYPE
    SYNTAX  INTEGER  (4..30)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The value in seconds that all bridges use for ForwardDelay when this 
         bridge is acting as the root."
    ::= { mstCistBridgeCfg 7 }

mstCistNewCfgBridgeForwardDelay OBJECT-TYPE
    SYNTAX  INTEGER  (4..30)
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The value in seconds that all bridges use for ForwardDelay when this 
         bridge is acting as the root."
    ::= { mstCistBridgeCfg 8 }

mstCistCurCfgVlanBmap OBJECT-TYPE
    SYNTAX  OCTET STRING (SIZE(0..512)) 
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
    "The vlans applied to the CIST group.  The vlans are 
     presented in bitmap format. This string displays vlan number
     from 1 to 4094.

     in receiving order:

         OCTET 1  OCTET 2  .....
             xxxxxxxx xxxxxxxx ..... 
             ||    || |_ vlan 9
             ||    ||  
             ||    ||___ vlan 8
             ||    |____ vlan 7
             ||      .    .   .
             ||_________ vlan 2
             |__________ vlan 1

         where x : 1 - The represented vlan applied to the CIST group. 
                   0 - The represented vlan not applied to the group"
    ::= { mstCistBridgeCfg 9 }

mstCistNewCfgVlanBmap OBJECT-TYPE
    SYNTAX  OCTET STRING (SIZE(0..512)) 
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
    "The vlans applied to the CIST group.  The vlans are 
     presented in bitmap format. This string displays vlan number
     from 1 to 4094.

     in receiving order:

         OCTET 1  OCTET 2  .....
             xxxxxxxx xxxxxxxx ..... 
             ||    || |_ vlan 9
             ||    ||  
             ||    ||___ vlan 8
             ||    |____ vlan 7
             ||      .    .   .
             ||_________ vlan 2
             |__________ vlan 1

         where x : 1 - The represented vlan applied to the CIST group. 
                   0 - The represented vlan not applied to the group"
    ::= { mstCistBridgeCfg 10 }

mstCistNewCfgAddVlan OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "The vlan to be added to the CIST Group.  A 
         '0' value is returned when read." 
    ::= { mstCistBridgeCfg 11 }

-- CIST Port Configuration

mstCistCurCfgPortTable OBJECT-TYPE
    SYNTAX SEQUENCE OF MstCistCurCfgPortTableEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The table of CIST Port configuration."
    ::= { mstCistCfg 3 }

mstCistCurCfgPortTableEntry OBJECT-TYPE
    SYNTAX MstCistCurCfgPortTableEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Information about a particular CIST Port configuration."
    INDEX { mstCistCurCfgPortIndex }
    ::= { mstCistCurCfgPortTable 1 }

MstCistCurCfgPortTableEntry ::= SEQUENCE {
    mstCistCurCfgPortIndex      PortNumber,
    mstCistCurCfgPortPriority   INTEGER,
    mstCistCurCfgPortPathCost   INTEGER,
    mstCistCurCfgPortLinkType   INTEGER,
    mstCistCurCfgPortEdge       INTEGER,
    mstCistCurCfgPortStpState   INTEGER,
    mstCistCurCfgPortHelloTime  INTEGER
    , mstCistCurCfgPortPvstProtection  INTEGER 
    }

mstCistCurCfgPortIndex OBJECT-TYPE
    SYNTAX PortNumber
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The port number of the port for which this entry contains spanning
         tree configuration."
    ::= { mstCistCurCfgPortTableEntry 1 }

mstCistCurCfgPortPriority OBJECT-TYPE
    SYNTAX INTEGER (0..240)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The four most significant bits of the Port Identifier of the 
         Spanning Tree instance can be modified by setting this value."
    ::= { mstCistCurCfgPortTableEntry 2 }

mstCistCurCfgPortPathCost OBJECT-TYPE
    SYNTAX INTEGER (0..200000000)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The contribution of this port to the path cost of paths towards 
         the CIST Root which include this port."
    ::= { mstCistCurCfgPortTableEntry 3 }

mstCistCurCfgPortLinkType OBJECT-TYPE
    SYNTAX INTEGER {
        auto(1),
        p2p(2),
        shared(3)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The administrative point-to-point status of the LAN segment attached 
         to this port.  A value of p2p (2) indicates that this port should 
         always be treated as if it is connected to a point-to-point link. 
         A value of shared(3) indicates that this port should be treated as 
         having a shared media connection.  A value of auto(1) indicates that 
         this port is considered to have a point-to-point link if it is an 
         Aggregator and all of its members are aggregatable, or if the MAC 
         entity is configured for full duplex operation, either through
         auto-negotiation or by management means. (for MSTP only)"
    ::= { mstCistCurCfgPortTableEntry 4 }

mstCistCurCfgPortEdge OBJECT-TYPE
    SYNTAX INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The value of the Edge Port parameter. (for MSTP only)"
    ::= { mstCistCurCfgPortTableEntry 5 }

mstCistCurCfgPortStpState OBJECT-TYPE
    SYNTAX INTEGER {
        on(1),
        off(2)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Turn port's Spanning Tree on/off."
    ::= { mstCistCurCfgPortTableEntry 6 }

mstCistCurCfgPortHelloTime OBJECT-TYPE
    SYNTAX  INTEGER (1..10)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The amount of time between the transmission of Configuration Port 
         PDUs in seconds."
    ::= { mstCistCurCfgPortTableEntry 7 } 

    mstCistCurCfgPortPvstProtection OBJECT-TYPE
    SYNTAX INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The value of the PVST Protection parameter."
    ::= { mstCistCurCfgPortTableEntry 8 }

mstCistNewCfgPortTable OBJECT-TYPE
    SYNTAX SEQUENCE OF MstCistNewCfgPortTableEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The table of CIST Port configuration."
    ::= { mstCistCfg 4 }

mstCistNewCfgPortTableEntry OBJECT-TYPE
    SYNTAX MstCistNewCfgPortTableEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Information about a particular CIST Port configuration."
    INDEX { mstCistNewCfgPortIndex }
    ::= { mstCistNewCfgPortTable 1 }

MstCistNewCfgPortTableEntry ::= SEQUENCE {
    mstCistNewCfgPortIndex      PortNumber,
    mstCistNewCfgPortPriority   INTEGER,
    mstCistNewCfgPortPathCost   INTEGER,
    mstCistNewCfgPortStpState   INTEGER,
    mstCistNewCfgPortHelloTime  INTEGER
    , mstCistNewCfgPortPvstProtection  INTEGER 
    }

mstCistNewCfgPortIndex OBJECT-TYPE
    SYNTAX PortNumber
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The port number of the port for which this entry contains spanning
         tree configuration."
    ::= { mstCistNewCfgPortTableEntry 1 }

mstCistNewCfgPortPriority OBJECT-TYPE
    SYNTAX INTEGER (0..240)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The four most significant bits of the Port Identifier of the 
         Spanning Tree instance can be modified by setting this value."
    ::= { mstCistNewCfgPortTableEntry 2 }

mstCistNewCfgPortPathCost OBJECT-TYPE
    SYNTAX INTEGER (0..200000000)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The contribution of this port to the path cost of paths towards 
         the CIST Root which include this port."
    ::= { mstCistNewCfgPortTableEntry 3 }



mstCistNewCfgPortStpState OBJECT-TYPE
    SYNTAX INTEGER {
        on(1),
        off(2)
        }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Turn port's Spanning Tree on/off."
    ::= { mstCistNewCfgPortTableEntry 6 }

mstCistNewCfgPortHelloTime OBJECT-TYPE
    SYNTAX  INTEGER (1..10)
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The amount of time between the transmission of Configuration Port 
         PDUs in seconds."
    ::= { mstCistNewCfgPortTableEntry 7 }

    mstCistNewCfgPortPvstProtection OBJECT-TYPE
    SYNTAX INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The value of the PVST Protection parameter."
    ::= { mstCistNewCfgPortTableEntry 8 }
 

-- L2 general


pvstCompatibilityCurCfgState OBJECT-TYPE
    SYNTAX INTEGER  {
        enable(1),
        disable(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable PVST+ compatibility"
    ::= { l2GeneralCfg 9 }

pvstCompatibilityNewCfgState OBJECT-TYPE
    SYNTAX INTEGER  {
        enable(1),
        disable(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable or disable PVST+ compatibility"
    ::= { l2GeneralCfg 10 }

nostpCurCfgState OBJECT-TYPE
    SYNTAX INTEGER {
        enable(1),
        disable(2)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "STP Mode Disable global state."
    ::= { l2GeneralCfg 11 }

nostpNewCfgState OBJECT-TYPE
    SYNTAX INTEGER {
        enable(1),
        disable(2)
        }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Enable or disable STP Mode Disable."
    ::= { l2GeneralCfg 12 }
stpLoopGuardCurCfgState OBJECT-TYPE
    SYNTAX INTEGER {
        enable(1),
        disable(2)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "STP loop guard global state."
    ::= { l2GeneralCfg 13 }

stpLoopGuardNewCfgState OBJECT-TYPE
    SYNTAX INTEGER {
        enable(1),
        disable(2)
        }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Enable or disable STP loop guard."
    ::= { l2GeneralCfg 14 }
vlanAutoStgCurCfgState OBJECT-TYPE
    SYNTAX INTEGER {
        enable(1),
        disable(2)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "VLAN automatic STG assignment global state."
    ::= { l2GeneralCfg 15 }

vlanAutoStgNewCfgState OBJECT-TYPE
    SYNTAX INTEGER {
        enable(1),
        disable(2)
        }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Enable or disable VLAN automatic STG assignment."
    ::= { l2GeneralCfg 16 }


--
-- { LLDP Port Table
--
lldpPortTableMaxEnt OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The maximum number of rows in the port configuration
         host table."
    ::= { lldpCfg 1 }

lldpCurCfgPortTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF LldpCurCfgPortEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table of LLDP port configuration in the current_configuration
         block."
    ::= { lldpCfg 2 }

lldpCurCfgPortEntry OBJECT-TYPE
    SYNTAX  LldpCurCfgPortEntry 
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A row in the LLDP port configuration table in the
         current_configuration block."
    INDEX   { lldpCurCfgPortIndx }
    ::= { lldpCurCfgPortTable 1 }
 
LldpCurCfgPortEntry ::= SEQUENCE {
    lldpCurCfgPortIndx           PortNumber,
    lldpCurCfgPortAdmStat        INTEGER,
    lldpCurCfgPortSnmpTrap    	 INTEGER
    ,lldpCurCfgPortportdesctlv   INTEGER
    ,lldpCurCfgPortsysnametlv    INTEGER
    ,lldpCurCfgPortsysdescrtlv   INTEGER
    ,lldpCurCfgPortsyscaptlv     INTEGER
    ,lldpCurCfgPortmgmtaddrtlv   INTEGER
    ,lldpCurCfgPortportvidtlv    INTEGER
    ,lldpCurCfgPortportprottlv   INTEGER
    ,lldpCurCfgPortvlannametlv   INTEGER
    ,lldpCurCfgPortprotidtlv     INTEGER
    ,lldpCurCfgPortmacphytlv     INTEGER
    ,lldpCurCfgPortpowermditlv   INTEGER
    ,lldpCurCfgPortlinkaggrtlv   INTEGER
    ,lldpCurCfgPortframesztlv    INTEGER
    ,lldpCurCfgPortdcbxtlv       INTEGER
    }
 
lldpCurCfgPortIndx OBJECT-TYPE
    SYNTAX  PortNumber
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The index of the row in LLDP port configurations table."
    ::= { lldpCurCfgPortEntry 1 }
 
lldpCurCfgPortAdmStat OBJECT-TYPE
    SYNTAX  INTEGER {
	enabledTxOnly(1),
	enabledRxOnly(2),
	enabledRxTx(3),
        disabled(4)
        } 
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "This is the admin status of the LLDP port."
    ::= { lldpCurCfgPortEntry 2 }

lldpCurCfgPortSnmpTrap OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        } 
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "This is the SNMP trap notification state of the LLDP port."
    ::= { lldpCurCfgPortEntry 3 }
 
lldpCurCfgPortportdesctlv OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "This is the Port Description TLV state of the LLDP port."
    ::= { lldpCurCfgPortEntry 4 }

lldpCurCfgPortsysnametlv OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "This is the System Name TLV state of the LLDP port."
    ::= { lldpCurCfgPortEntry 5 }

lldpCurCfgPortsysdescrtlv OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "This is the System Description TLV state of the LLDP port."
    ::= { lldpCurCfgPortEntry 6 }

lldpCurCfgPortsyscaptlv OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "This is the System Capabilities TLV state of the LLDP port."
    ::= { lldpCurCfgPortEntry 7 }

lldpCurCfgPortmgmtaddrtlv OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "This is the Management Address TLV state of the LLDP port."
    ::= { lldpCurCfgPortEntry 8 }

lldpCurCfgPortportvidtlv OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "This is the Port VLAN ID TLV state of the LLDP port."
    ::= { lldpCurCfgPortEntry 9 }

lldpCurCfgPortportprottlv OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "This is the Port and Protocol VLAN ID TLV state of the LLDP port."
    ::= { lldpCurCfgPortEntry 10 }

lldpCurCfgPortvlannametlv OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "This is the VLAN Name TLV state of the LLDP port."
    ::= { lldpCurCfgPortEntry 11 }

lldpCurCfgPortprotidtlv OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "This is the Protocol Identity TLV state of the LLDP port."
    ::= { lldpCurCfgPortEntry 12 }

lldpCurCfgPortmacphytlv OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "This is the MAC/PHY Configuration/Status TLV state of the LLDP port."
    ::= { lldpCurCfgPortEntry 13 }

lldpCurCfgPortpowermditlv OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "This is the Power Via MDI TLV state of the LLDP port."
    ::= { lldpCurCfgPortEntry 14 }

lldpCurCfgPortlinkaggrtlv OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "This is the Link Aggregation TLV state of the LLDP port."
    ::= { lldpCurCfgPortEntry 15 }

lldpCurCfgPortframesztlv OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "This is the Maximum Frame Size TLV state of the LLDP port."
    ::= { lldpCurCfgPortEntry 16 }

lldpCurCfgPortdcbxtlv OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "This is the DCBX TLV state of the LLDP port."
    ::= { lldpCurCfgPortEntry 17 }


lldpNewCfgPortTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF LldpNewCfgPortEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table of LLDP port configuration in the new_configuration
         block."
    ::= { lldpCfg 3 }

lldpNewCfgPortEntry OBJECT-TYPE
    SYNTAX  LldpNewCfgPortEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A row in the LLDP port configuration table in the
         new_configuration block."
    INDEX   { lldpNewCfgPortIndx }
    ::= { lldpNewCfgPortTable 1 }
 
LldpNewCfgPortEntry ::= SEQUENCE {
    lldpNewCfgPortIndx           PortNumber,
    lldpNewCfgPortAdmStat        INTEGER,
    lldpNewCfgPortSnmpTrap       INTEGER
    ,lldpNewCfgPortportdesctlv   INTEGER
    ,lldpNewCfgPortsysnametlv    INTEGER
    ,lldpNewCfgPortsysdescrtlv   INTEGER
    ,lldpNewCfgPortsyscaptlv     INTEGER
    ,lldpNewCfgPortmgmtaddrtlv   INTEGER
    ,lldpNewCfgPortportvidtlv    INTEGER
    ,lldpNewCfgPortportprottlv   INTEGER
    ,lldpNewCfgPortvlannametlv   INTEGER
    ,lldpNewCfgPortprotidtlv     INTEGER
    ,lldpNewCfgPortmacphytlv     INTEGER
    ,lldpNewCfgPortpowermditlv   INTEGER
    ,lldpNewCfgPortlinkaggrtlv   INTEGER
    ,lldpNewCfgPortframesztlv    INTEGER
    ,lldpNewCfgPortalltlv        INTEGER
    ,lldpNewCfgPortdcbxtlv       INTEGER
    }
 
lldpNewCfgPortIndx OBJECT-TYPE
    SYNTAX  PortNumber
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The index of the row in LLDP port configurations table."
    ::= { lldpNewCfgPortEntry 1 }
 
lldpNewCfgPortAdmStat OBJECT-TYPE
    SYNTAX  INTEGER {
	enabledTxOnly(1),
	enabledRxOnly(2),
	enabledRxTx(3),
	disabled(4)
        } 
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "This is the admin status of the LLDP port."
    ::= { lldpNewCfgPortEntry 2 }

lldpNewCfgPortSnmpTrap OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
	disabled(2)
        } 
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "This is the SNMP trap notification state of the LLDP port"
    ::= { lldpNewCfgPortEntry 3 }

lldpNewCfgPortportdesctlv OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "This is the Port Description TLV state of the LLDP port."
    ::= { lldpNewCfgPortEntry 4 }

lldpNewCfgPortsysnametlv OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "This is the System Name TLV state of the LLDP port."
    ::= { lldpNewCfgPortEntry 5 }

lldpNewCfgPortsysdescrtlv OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "This is the System Description TLV state of the LLDP port."
    ::= { lldpNewCfgPortEntry 6 }

lldpNewCfgPortsyscaptlv OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "This is the System Capabilities TLV state of the LLDP port."
    ::= { lldpNewCfgPortEntry 7 }

lldpNewCfgPortmgmtaddrtlv OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "This is the Management Address TLV state of the LLDP port."
    ::= { lldpNewCfgPortEntry 8 }

lldpNewCfgPortportvidtlv OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "This is the Port VLAN ID TLV state of the LLDP port."
    ::= { lldpNewCfgPortEntry 9 }

lldpNewCfgPortportprottlv OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "This is the Port and Protocol VLAN ID TLV state of the LLDP port."
    ::= { lldpNewCfgPortEntry 10 }

lldpNewCfgPortvlannametlv OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "This is the VLAN Name TLV state of the LLDP port."
    ::= { lldpNewCfgPortEntry 11 }

lldpNewCfgPortprotidtlv OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "This is the Protocol Identity TLV state of the LLDP port."
    ::= { lldpNewCfgPortEntry 12 }

lldpNewCfgPortmacphytlv OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "This is the MAC/PHY Configuration/Status TLV state of the LLDP port."
    ::= { lldpNewCfgPortEntry 13 }

lldpNewCfgPortpowermditlv OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "This is the Power Via MDI TLV state of the LLDP port."
    ::= { lldpNewCfgPortEntry 14 }

lldpNewCfgPortlinkaggrtlv OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "This is the Link Aggregation TLV state of the LLDP port."
    ::= { lldpNewCfgPortEntry 15 }

lldpNewCfgPortframesztlv OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "This is the Maximum Frame Size TLV state of the LLDP port."
    ::= { lldpNewCfgPortEntry 16 }

lldpNewCfgPortalltlv OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2),
        other(3)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Set the corresponding state for all the LLDP port's TLVs.
         other(3) is returned when the object is read."
    ::= { lldpNewCfgPortEntry 17 }

lldpNewCfgPortdcbxtlv OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "This is the DCBX TLV state of the LLDP port."
    ::= { lldpNewCfgPortEntry 18 }


--
-- } End of LLDP Port Table
--

--
-- { LLDP General Table
--
lldpGeneral      OBJECT IDENTIFIER ::= { lldpCfg 4 }

lldpCurCfgState OBJECT-TYPE
    SYNTAX INTEGER {
        on(1),
        off(2)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "LLDP global state."
    ::= { lldpGeneral 1 }

lldpNewCfgState OBJECT-TYPE
    SYNTAX INTEGER {
        on(1),
        off(2)
        }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Globally turn LLDP on or off."
    ::= { lldpGeneral 2 }
       
lldpCurCfgMsgTxInt OBJECT-TYPE
      SYNTAX  INTEGER  (5..32768)
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
              "LLDP message transmission interval for LLDPDU."
      ::= { lldpGeneral 3 }
       
lldpNewCfgMsgTxInt OBJECT-TYPE
      SYNTAX  INTEGER  (5..32768)
      MAX-ACCESS  read-write
      STATUS  current
      DESCRIPTION
              "LLDP message transmission interval for LLDPDU."
      ::= { lldpGeneral 4 }
       
lldpCurCfgMsgTxHld OBJECT-TYPE
      SYNTAX  INTEGER  (2..10)
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
              "LLDP message transmission holdtime-multiplier."
      ::= { lldpGeneral 5 }
       
lldpNewCfgMsgTxHld OBJECT-TYPE
      SYNTAX  INTEGER  (2..10)
      MAX-ACCESS  read-write
      STATUS  current
      DESCRIPTION
              "LLDP message transmission holdtime-multiplier."
      ::= { lldpGeneral 6 }
 
lldpCurCfgNotifInt OBJECT-TYPE
      SYNTAX  INTEGER (1..3600)
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
              "LLDP minimum SNMP trap notification interval."
      ::= { lldpGeneral 7 }
       
lldpNewCfgNotifInt OBJECT-TYPE
      SYNTAX  INTEGER (1..3600)
      MAX-ACCESS  read-write
      STATUS  current
      DESCRIPTION
              "LLDP minimum SNMP trap notification interval."
      ::= { lldpGeneral 8 }
       
lldpCurCfgTxDelay OBJECT-TYPE
      SYNTAX  INTEGER  (1..8192)
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
              "LLDP delay interval between advertisements."
      ::= { lldpGeneral 9 }
       
lldpNewCfgTxDelay OBJECT-TYPE
      SYNTAX  INTEGER  (1..8192)
      MAX-ACCESS  read-write
      STATUS  current
      DESCRIPTION
              "LLDP delay interval between advertisements."
      ::= { lldpGeneral 10 }

lldpCurCfgReinitDelay OBJECT-TYPE
      SYNTAX  INTEGER  (1..10)
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
              "LLDP reinit delay interval."
      ::= { lldpGeneral 11 }
       
lldpNewCfgReinitDelay OBJECT-TYPE
      SYNTAX  INTEGER  (1..10)
      MAX-ACCESS  read-write
      STATUS  current
      DESCRIPTION
              "LLDP reinit delay interval."
      ::= { lldpGeneral 12 }
--
-- } End of LLDP General Table
--

--
-- { LLDP Statistics
--
lldpStatsTableMaxEnt OBJECT-TYPE
      SYNTAX  INTEGER
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
              "The maximum number of rows in the statistics 
	       host table."
      ::= { lldpStats 1 }

lldpStatsTable OBJECT-TYPE
      SYNTAX SEQUENCE OF LldpStatsTableEntry
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
              "The table of LLDP statistics."
      ::= { lldpStats 2 }

lldpStatsClearAll  OBJECT-TYPE
    SYNTAX  INTEGER {
        ok(1),
        clear(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Setting this to clear(2) results in clearing the LLDP statistics
        for all the ports."
    ::= { lldpStats 3 }

lldpStatsTableEntry OBJECT-TYPE
      SYNTAX LldpStatsTableEntry
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
              "LLDP statistics info."
      INDEX   { lldpStatsIndex }
      ::= { lldpStatsTable 1 }

LldpStatsTableEntry ::= SEQUENCE {
    lldpStatsIndex                 PortNumber,
    lldpStatsFramesOutTotal        Counter32,
    lldpStatsFramesInTotal         Counter32,
    lldpStatsFramesInErrorsTotal   Counter32,
    lldpStatsFramesDiscardedTotal  Counter32,
    lldpStatsTLVsUnrecognizedTotal Counter32,
    lldpStatsAgeoutsTotal          Counter32,
    lldpStatsClear                 INTEGER
}

lldpStatsIndex OBJECT-TYPE
    SYNTAX  PortNumber
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The index of the row in LLDP port statistics."
    ::= { lldpStatsTableEntry 1 }
 
lldpStatsFramesOutTotal OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"The total number of LLDP frames transmitted in this port." 
    ::= { lldpStatsTableEntry 2 }

lldpStatsFramesInTotal OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"The total number of LLDP frames received in this port." 
    ::= { lldpStatsTableEntry 3 }

lldpStatsFramesInErrorsTotal OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"The total number of erroneous LLDP frames received in this port." 
    ::= { lldpStatsTableEntry 4 }

lldpStatsFramesDiscardedTotal OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"The total number of received LLDP frames discarded in this port." 
    ::= { lldpStatsTableEntry 5 }

lldpStatsTLVsUnrecognizedTotal OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"The total number of unrecognized TLVs in this port." 
    ::= { lldpStatsTableEntry 6 }

lldpStatsAgeoutsTotal OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"The total number of neighbor's information deleted in this port." 
    ::= { lldpStatsTableEntry 7 }

lldpStatsClear  OBJECT-TYPE
    SYNTAX  INTEGER {
        ok(1),
        clear(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Setting this to clear(2) results in clearing the LLDP statistics."
    ::= { lldpStatsTableEntry 8 }

--
-- } End of LLDP Statistics
--

--
--  { LLDP Info
--
lldpInfoPortTable OBJECT-TYPE
      SYNTAX SEQUENCE OF LldpInfoPortEntry
      MAX-ACCESS not-accessible
      STATUS  current
      DESCRIPTION
              "The table of LLDP Port Info."
      ::= { lldpInfo 1 }

lldpInfoPortEntry OBJECT-TYPE
      SYNTAX LldpInfoPortEntry
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
              "LLDP Port Info."
      INDEX   { lldpInfoPortIndex }
      ::= { lldpInfoPortTable 1 }

LldpInfoPortEntry ::= SEQUENCE {
      lldpInfoPortIndex                PortNumber,
      lldpInfoPortAlias                DisplayString,
      lldpInfoPortMacAddress           PhysAddress,
      lldpInfoPortMtu                  Integer32,
      lldpInfoPortEnabled              INTEGER,
      lldpInfoPortAdminStatus          INTEGER,
      lldpInfoPortRxChanges            INTEGER
     ,lldpInfoPortportdesctlv   INTEGER
     ,lldpInfoPortsysnametlv    INTEGER
     ,lldpInfoPortsysdescrtlv   INTEGER
     ,lldpInfoPortsyscaptlv     INTEGER
     ,lldpInfoPortmgmtaddrtlv   INTEGER
     ,lldpInfoPortportvidtlv    INTEGER
     ,lldpInfoPortportprottlv   INTEGER
     ,lldpInfoPortvlannametlv   INTEGER
     ,lldpInfoPortprotidtlv     INTEGER
     ,lldpInfoPortmacphytlv     INTEGER
     ,lldpInfoPortpowermditlv   INTEGER
     ,lldpInfoPortlinkaggrtlv   INTEGER
     ,lldpInfoPortframesztlv    INTEGER
     ,lldpInfoPortdcbxtlv       INTEGER
}

lldpInfoPortIndex OBJECT-TYPE
      SYNTAX  PortNumber
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
          "The index of the row in LLDP info port table."
      ::= { lldpInfoPortEntry 1 }

lldpInfoPortAlias OBJECT-TYPE
      SYNTAX  DisplayString  (SIZE(0..32))
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
          "The port alias of the port in LLDP info port table."
      ::= { lldpInfoPortEntry 2 }

lldpInfoPortMacAddress OBJECT-TYPE
      SYNTAX  PhysAddress
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
          "The mac address of the port in LLDP info port table."
      ::= { lldpInfoPortEntry 3 }

lldpInfoPortMtu OBJECT-TYPE
      SYNTAX  Integer32
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
          "The MTU size of the port in LLDP info port table."
      ::= { lldpInfoPortEntry 4 }

lldpInfoPortEnabled OBJECT-TYPE
      SYNTAX  INTEGER {
          true(1),
          false(2)
      }
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
          "The PortEnabled field of the port in LLDP info port table."
      ::= { lldpInfoPortEntry 5 }

lldpInfoPortAdminStatus OBJECT-TYPE
      SYNTAX  INTEGER {
          enabledTxOnly(1),
          enabledRxOnly(2),
          enabledRxTx(3),
          disabled(4)
      }
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
          "The Admin Status of the port in LLDP info port table."
      ::= { lldpInfoPortEntry 6 }

lldpInfoPortRxChanges OBJECT-TYPE
      SYNTAX  INTEGER {
          true(1),
          false(2)
      }
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
          "The rxChanges field of the port in LLDP info port table."
      ::= { lldpInfoPortEntry 7 }

lldpInfoPortportdesctlv OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "This is the Port Description TLV state of the LLDP port."
    ::= { lldpInfoPortEntry 8 }

lldpInfoPortsysnametlv OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "This is the System Name TLV state of the LLDP port."
    ::= { lldpInfoPortEntry 9 }

lldpInfoPortsysdescrtlv OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "This is the System Description TLV state of the LLDP port."
    ::= { lldpInfoPortEntry 10 }

lldpInfoPortsyscaptlv OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "This is the System Capabilities TLV state of the LLDP port."
    ::= { lldpInfoPortEntry 11 }

lldpInfoPortmgmtaddrtlv OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "This is the Management Address TLV state of the LLDP port."
    ::= { lldpInfoPortEntry 12 }

lldpInfoPortportvidtlv OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "This is the Port VLAN ID TLV state of the LLDP port."
    ::= { lldpInfoPortEntry 13 }

lldpInfoPortportprottlv OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "This is the Port and Protocol VLAN ID TLV state of the LLDP port."
    ::= { lldpInfoPortEntry 14 }

lldpInfoPortvlannametlv OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "This is the VLAN Name TLV state of the LLDP port."
    ::= { lldpInfoPortEntry 15 }

lldpInfoPortprotidtlv OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "This is the Protocol Identity TLV state of the LLDP port."
    ::= { lldpInfoPortEntry 16 }

lldpInfoPortmacphytlv OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "This is the MAC/PHY Configuration/Status TLV state of the LLDP port."
    ::= { lldpInfoPortEntry 17 }

lldpInfoPortpowermditlv OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "This is the Power Via MDI TLV state of the LLDP port."
    ::= { lldpInfoPortEntry 18 }

lldpInfoPortlinkaggrtlv OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "This is the Link Aggregation TLV state of the LLDP port."
    ::= { lldpInfoPortEntry 19 }

lldpInfoPortframesztlv OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "This is the Maximum Frame Size TLV state of the LLDP port."
    ::= { lldpInfoPortEntry 20 }

lldpInfoPortdcbxtlv OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "This is the DCBX TLV state of the LLDP port."
    ::= { lldpInfoPortEntry 21 }


lldpInfoTxTable OBJECT-TYPE
      SYNTAX SEQUENCE OF LldpInfoTxEntry
      MAX-ACCESS not-accessible
      STATUS  current
      DESCRIPTION
              "The table of LLDP Transmit State Machine Info."
      ::= { lldpInfo 2 }

lldpInfoTxEntry OBJECT-TYPE
      SYNTAX LldpInfoTxEntry
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
              "LLDP Transmit State Machine Info."
      INDEX   { lldpInfoTxIndex }
      ::= { lldpInfoTxTable 1 }

LldpInfoTxEntry ::= SEQUENCE {
      lldpInfoTxIndex                PortNumber,
      lldpInfoTxState                INTEGER,
      lldpInfoTxLocalChanged         INTEGER,
      lldpInfoTxTTL                  Integer32,
      lldpInfoTxTxTTR                Integer32,
      lldpInfoTxDelayWhile           Integer32,
      lldpInfoTxShutdownWhile        Integer32,
      lldpInfoTxReinitDelay          Integer32,
      lldpInfoTxHoldMultiplier       Integer32,
      lldpInfoTxTransmitInterval     Integer32,
      lldpInfoTxTransmitDelay        Integer32
}

lldpInfoTxIndex OBJECT-TYPE
      SYNTAX  PortNumber
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
          "The index of the row in LLDP Transmit State Machine info table."
      ::= { lldpInfoTxEntry 1 }

lldpInfoTxState OBJECT-TYPE
      SYNTAX  INTEGER {
          txLldpInitialize(1),
          txIdle(2),
          txShutdownFrame(3),
          txInfoFrame(4)
      }
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
          "The transmit state of the port in LLDP Transmit State Machine."
      ::= { lldpInfoTxEntry 2 }

lldpInfoTxLocalChanged OBJECT-TYPE
      SYNTAX  INTEGER {
          true(1),
          false(2)
      }
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
          "The somethingChangedLocal field of the port in LLDP Transmit 
	   State Machine."
      ::= { lldpInfoTxEntry 3 }

lldpInfoTxTTL OBJECT-TYPE
      SYNTAX  Integer32
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
          "The txTTL timer of the port in LLDP Transmit State Machine."
      ::= { lldpInfoTxEntry 4 }

lldpInfoTxTxTTR OBJECT-TYPE
      SYNTAX  Integer32
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
          "The txTTR timer of the port in LLDP Transmit State Machine."
      ::= { lldpInfoTxEntry 5 }

lldpInfoTxDelayWhile OBJECT-TYPE
      SYNTAX  Integer32
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
          "The txDelayWhile timer of the port in LLDP Transmit State 
	   Machine."
      ::= { lldpInfoTxEntry 6 }

lldpInfoTxShutdownWhile OBJECT-TYPE
      SYNTAX  Integer32
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
          "The txShutdownWhile timer of the port in LLDP Transmit State 
	   Machine."
      ::= { lldpInfoTxEntry 7 }

lldpInfoTxReinitDelay OBJECT-TYPE
      SYNTAX  Integer32
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
          "The reinitDelay timer of the port in LLDP Transmit State 
	   Machine."
      ::= { lldpInfoTxEntry 8 }

lldpInfoTxHoldMultiplier OBJECT-TYPE
      SYNTAX  Integer32
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
          "The msgTxHold timer of the port in LLDP Transmit State 
	   Machine."
      ::= { lldpInfoTxEntry 9 }

lldpInfoTxTransmitInterval OBJECT-TYPE
      SYNTAX  Integer32
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
          "The msgTxInterval timer of the port in LLDP Transmit State 
	   Machine."
      ::= { lldpInfoTxEntry 10 }

lldpInfoTxTransmitDelay OBJECT-TYPE
      SYNTAX  Integer32
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
          "The txDelay timer of the port in LLDP Transmit State Machine."
      ::= { lldpInfoTxEntry 11 }

lldpInfoRxTable OBJECT-TYPE
      SYNTAX SEQUENCE OF LldpInfoRxEntry
      MAX-ACCESS not-accessible
      STATUS  current
      DESCRIPTION
              "The table of LLDP Receive State Machine Info."
      ::= { lldpInfo 3 }

lldpInfoRxEntry OBJECT-TYPE
      SYNTAX LldpInfoRxEntry
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
              "LLDP Receive State Machine Info."
      INDEX   { lldpInfoRxIndex }
      ::= { lldpInfoRxTable 1 }

LldpInfoRxEntry ::= SEQUENCE {
      lldpInfoRxIndex                PortNumber,
      lldpInfoRxState                INTEGER,
      lldpInfoRxBadFrame             INTEGER,
      lldpInfoRxRcvFrame             INTEGER,
      lldpInfoRxRxInfoAge            INTEGER,
      lldpInfoRxRemoteChanged        INTEGER,
      lldpInfoRxTooManyNeighbors     INTEGER,
      lldpInfoRxSNMPNotify           INTEGER,
      lldpInfoRxRxTTL                Integer32,
      lldpInfoRxTooManyNeighborTimer Integer32
}

lldpInfoRxIndex OBJECT-TYPE
      SYNTAX  PortNumber
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
          "The index of the row in LLDP Receive State Machine info table."
      ::= { lldpInfoRxEntry 1 }

lldpInfoRxState OBJECT-TYPE
      SYNTAX  INTEGER {
          lldpWaitPortOperational(1),
          deleteAgedInfo(2),
          rxLldpInitialize(3),
          rxWaitForFrame(4),
          rxFrame(5),
          deleteInfo(6),
          updateInfo(7)
      }
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
          "The receive state of the port in LLDP Receive State Machine."
      ::= { lldpInfoRxEntry 2 }

lldpInfoRxBadFrame OBJECT-TYPE
      SYNTAX  INTEGER {
          true(1),
          false(2)
      }
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
          "The badFrame field of the port in LLDP Receive State Machine."
      ::= { lldpInfoRxEntry 3 }

lldpInfoRxRcvFrame OBJECT-TYPE
      SYNTAX  INTEGER {
          true(1),
          false(2)
      }
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
          "The rcvFrame field of the port in LLDP Receive State Machine."
      ::= { lldpInfoRxEntry 4 }

lldpInfoRxRxInfoAge OBJECT-TYPE
      SYNTAX  INTEGER {
          true(1),
          false(2)
      }
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
          "The rxInfoAge field of the port in LLDP Receive State Machine."
      ::= { lldpInfoRxEntry 5 }

lldpInfoRxRemoteChanged OBJECT-TYPE
      SYNTAX  INTEGER {
          true(1),
          false(2)
      }
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
          "The somethingChangedRemote field of the port in LLDP Receive 
	   State Machine."
      ::= { lldpInfoRxEntry 6 }

lldpInfoRxTooManyNeighbors OBJECT-TYPE
      SYNTAX  INTEGER {
          true(1),
          false(2)
      }
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
          "The tooManyNeighbors field of the port in LLDP Receive 
	   State Machine."
      ::= { lldpInfoRxEntry 7 }

lldpInfoRxSNMPNotify OBJECT-TYPE
      SYNTAX  INTEGER {
          true(1),
          false(2)
      }
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
          "The tooManyNeighbors field of the port in LLDP Receive 
	   State Machine."
      ::= { lldpInfoRxEntry 8 }

lldpInfoRxRxTTL OBJECT-TYPE
      SYNTAX  Integer32
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
          "The rxTTL timer of the port in LLDP Receive State Machine."
      ::= { lldpInfoRxEntry 9 }

lldpInfoRxTooManyNeighborTimer OBJECT-TYPE
      SYNTAX  Integer32
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
          "The tooManyNeighborsTimer timer of the port in LLDP Receive State 
	   Machine."
      ::= { lldpInfoRxEntry 10 }

lldpInfoRemoteDevicesTable OBJECT-TYPE
      SYNTAX SEQUENCE OF LldpInfoRemoteDevicesEntry
      MAX-ACCESS not-accessible
      STATUS  current
      DESCRIPTION
              "The table of LLDP remote devices Info."
      ::= { lldpInfo 4 }

lldpInfoRemoteDevicesEntry OBJECT-TYPE
      SYNTAX LldpInfoRemoteDevicesEntry
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
              "LLDP remote devices Info."
      INDEX   { lldpInfoRemoteDevicesIndex }
      ::= { lldpInfoRemoteDevicesTable 1 }

LldpInfoRemoteDevicesEntry ::= SEQUENCE {
      lldpInfoRemoteDevicesIndex                INTEGER,
      lldpInfoRemoteDevicesRemoteTTL            Integer32,
      lldpInfoRemoteDevicesRxChanges            INTEGER,
      lldpInfoRemoteDevicesLocalPort            DisplayString,
      lldpInfoRemoteDevicesChassisSubtype       INTEGER,
      lldpInfoRemoteDevicesChassisId            DisplayString,
      lldpInfoRemoteDevicesPortSubtype          INTEGER,
      lldpInfoRemoteDevicesPortId               DisplayString,
      lldpInfoRemoteDevicesSystemName           DisplayString,
      lldpInfoRemoteDevicesSystemDescription    DisplayString,
      lldpInfoRemoteDevicesPortDescription      DisplayString,
      lldpInfoRemoteDevicesSystemCapSupported   DisplayString,
      lldpInfoRemoteDevicesSystemCapEnabled     DisplayString
}

lldpInfoRemoteDevicesIndex OBJECT-TYPE
      SYNTAX  INTEGER  (1..256)
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
          "The index of the row in LLDP remote devices info table."
      ::= { lldpInfoRemoteDevicesEntry 1 }

-- lldpInfoMsapMagicNumber OBJECT-TYPE
--       SYNTAX  Integer32
--       MAX-ACCESS  read-only
--       STATUS  current
--       DESCRIPTION
--           "The magic number of the LLDP MSAP entry."
--       ::= { lldpInfoRemoteDevicesEntry 2 }

lldpInfoRemoteDevicesRemoteTTL OBJECT-TYPE
      SYNTAX  Integer32
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
          "The remote TTL of the LLDP remote devices entry."
      ::= { lldpInfoRemoteDevicesEntry 3 }

lldpInfoRemoteDevicesRxChanges OBJECT-TYPE
      SYNTAX  INTEGER {
          true(1),
          false(2)
      }
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
          "The rxChanges field of the LLDP remote devices entry."
      ::= { lldpInfoRemoteDevicesEntry 4 }

lldpInfoRemoteDevicesLocalPort OBJECT-TYPE
      SYNTAX  DisplayString (SIZE(1..128))
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
          "The local port alias of the LLDP remote devices entry."
      ::= { lldpInfoRemoteDevicesEntry 5 }

lldpInfoRemoteDevicesChassisSubtype OBJECT-TYPE
      SYNTAX  INTEGER {
          chassisComponent(1),
          interfaceAlias(2),
          portComponent(3),
          macAddress(4),
          networkAddress(5),
          interfaceName(6),
          locallyAssigned(7)
      }
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
          "The chassis ID subtype of the LLDP remote devices entry."
      ::= { lldpInfoRemoteDevicesEntry 6 }

lldpInfoRemoteDevicesChassisId OBJECT-TYPE
      SYNTAX  DisplayString (SIZE(1..255))
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
          "The chassis ID of the LLDP remote devices entry."
      ::= { lldpInfoRemoteDevicesEntry 7 }

lldpInfoRemoteDevicesPortSubtype OBJECT-TYPE
      SYNTAX  INTEGER {
          interfaceAlias(1),
          portComponent(2),
          macAddress(3),
          networkAddress(4),
          interfaceName(5),
          agentCircuitId(6),
          locallyAssigned(7)
      }
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
          "The port ID subtype of the LLDP remote devices entry."
      ::= { lldpInfoRemoteDevicesEntry 8 }

lldpInfoRemoteDevicesPortId OBJECT-TYPE
      SYNTAX  DisplayString (SIZE(1..255))
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
          "The port ID of the LLDP remote devices entry."
      ::= { lldpInfoRemoteDevicesEntry 9 }

lldpInfoRemoteDevicesSystemName OBJECT-TYPE
      SYNTAX  DisplayString (SIZE(0..255))
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
          "The system name of the LLDP remote devices entry."
      ::= { lldpInfoRemoteDevicesEntry 10 }

lldpInfoRemoteDevicesSystemDescription OBJECT-TYPE
      SYNTAX  DisplayString (SIZE(0..255))
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
          "The system description of the LLDP remote devices entry."
      ::= { lldpInfoRemoteDevicesEntry 11 }

lldpInfoRemoteDevicesPortDescription OBJECT-TYPE
      SYNTAX  DisplayString (SIZE(0..255))
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
          "The port description of the LLDP remote devices entry."
      ::= { lldpInfoRemoteDevicesEntry 12 }

lldpInfoRemoteDevicesSystemCapSupported OBJECT-TYPE
      SYNTAX  DisplayString (SIZE(0..64))
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
          "The supported system capabilities of the LLDP remote devices entry."
      ::= { lldpInfoRemoteDevicesEntry 13 }

lldpInfoRemoteDevicesSystemCapEnabled OBJECT-TYPE
      SYNTAX  DisplayString (SIZE(0..64))
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
          "The enabled system capabilities of the LLDP remote devices entry."
      ::= { lldpInfoRemoteDevicesEntry 14 }

--
-- lldpInfoRemoteDevicesManAddrTable : Management addresses of remote system
--

lldpInfoRemoteDevicesManAddrTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF LldpInfoRemoteDevicesManAddrEntry
    MAX-ACCESS not-accessible
    STATUS  current
    DESCRIPTION
        "The table of LLDP remote devices management address Info."
    ::= { lldpInfo 5 }

lldpInfoRemoteDevicesManAddrEntry OBJECT-TYPE
    SYNTAX      LldpInfoRemoteDevicesManAddrEntry
    MAX-ACCESS not-accessible
    STATUS      current
    DESCRIPTION
        "LLDP remote devices management address Info."
    INDEX       { lldpInfoRemoteDevicesIndex,
                  lldpInfoRemoteDevicesManAddrSubtype,
                  lldpInfoRemoteDevicesManAddr
    }
    ::= { lldpInfoRemoteDevicesManAddrTable 1 }

LldpInfoRemoteDevicesManAddrEntry ::= SEQUENCE {
    lldpInfoRemoteDevicesManAddrSubtype         INTEGER,
    lldpInfoRemoteDevicesManAddr                DisplayString,
    lldpInfoRemoteDevicesManAddrIfSubtype       INTEGER,
    lldpInfoRemoteDevicesManAddrIfId            Integer32,
    lldpInfoRemoteDevicesManAddrOID             DisplayString
}

lldpInfoRemoteDevicesManAddrSubtype OBJECT-TYPE
      SYNTAX  INTEGER {
	  other(0),
	  ipV4(1),
	  ipV6(2),
	  nsap(3),
	  hdlc(4),
	  bbn1822(5),
	  all802(6),
	  e163(7),
	  e164(8),
	  f69(9),
	  x121(10),
	  ipx(11),
	  appletalk(12),
	  decnetIV(13),
	  banyanVines(14),
	  e164withNsap(15),
	  dns(16),
	  distinguishedname(17),
	  asnumber(18),
	  xtpoveripv4(19),
	  xtpoveripv6(20),
	  xtpnativemodextp(21),
	  reserved(65535)
      }
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
          "The management address subtype of the LLDP remote devices entry."
      ::= { lldpInfoRemoteDevicesManAddrEntry 1 }

lldpInfoRemoteDevicesManAddr OBJECT-TYPE
      SYNTAX  DisplayString (SIZE(1..64))
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
          "The management address of the LLDP remote devices entry."
      ::= { lldpInfoRemoteDevicesManAddrEntry 2 }

lldpInfoRemoteDevicesManAddrIfSubtype OBJECT-TYPE
      SYNTAX  INTEGER {
          unknown(1),
          ifIndex(2),
          systemPortNumber(3)
      }
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
          "The interface numbering subtype of the LLDP remote devices 
	   management address entry."
      ::= { lldpInfoRemoteDevicesManAddrEntry 3 }

lldpInfoRemoteDevicesManAddrIfId OBJECT-TYPE
      SYNTAX  Integer32
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
          "The interface number of the LLDP remote devices management address 
	   entry."
      ::= { lldpInfoRemoteDevicesManAddrEntry 4 }

lldpInfoRemoteDevicesManAddrOID OBJECT-TYPE
      SYNTAX  DisplayString (SIZE(0..128))
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
          "The object identifier of the LLDP remote devices management address 
	   entry."
      ::= { lldpInfoRemoteDevicesManAddrEntry 5 }

lldpClearMsap OBJECT-TYPE
    SYNTAX INTEGER {
        ok(0),
        clearMsap(1)
    }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Clear LLDP remote devices information when setting clearMsap(1).
         When read, ok(0) is always returned."
    ::= { lldpInfo 6 }

--
--  } End of LLDP Info
--

--
--  { UDLD
--

udldInfoPortTable  OBJECT-TYPE
      SYNTAX  SEQUENCE OF UdldInfoPortEntry
      MAX-ACCESS  not-accessible
      STATUS  current
      DESCRIPTION
          "The table of UDLD port info."
      ::= { udldInfo 1 }

udldInfoPortEntry  OBJECT-TYPE
      SYNTAX  UdldInfoPortEntry
      MAX-ACCESS  not-accessible
      STATUS  current
      DESCRIPTION
          "A row inside UDLD port info table."
      INDEX  { udldInfoPortIndex }
      ::= { udldInfoPortTable 1 }

UdldInfoPortEntry ::= SEQUENCE
{     udldInfoPortIndex               PortNumber
,     udldInfoPortConfig              INTEGER
,     udldInfoPortMode                INTEGER
,     udldInfoPortLink                INTEGER
,     udldInfoPortOperationalStatus   INTEGER
,     udldInfoPortBidirectionalStatus INTEGER
,     udldInfoPortInterval            INTEGER
,     udldInfoPortTimeout             INTEGER
,     udldInfoPortNeighborCount       INTEGER
}

udldInfoPortIndex  OBJECT-TYPE
      SYNTAX  PortNumber
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
          "The index of the row in UDLD port configuration table."
      ::= { udldInfoPortEntry 1 }

udldInfoPortConfig OBJECT-TYPE
      SYNTAX  INTEGER
      {   enabled(1)
      ,   disabled(2)
      }
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
          "The Config field of the port in UDLD port info table.
      Shows the administative state of the current port."
      ::= { udldInfoPortEntry 2 }
 
udldInfoPortMode OBJECT-TYPE
      SYNTAX  INTEGER
      {   aggresive(1)
      ,   normal(2)
      }
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
          "The Mode field of the port in UDLD info port table.
      Shows the udld administrative mode for the current port."
      ::= { udldInfoPortEntry 3 }

udldInfoPortLink OBJECT-TYPE
      SYNTAX  INTEGER
      {   up(1)
      ,   down(2)
      }
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
          "The Link field of the port in UDLD info port table.
      Shows the state of the link associated with the port."
      ::= { udldInfoPortEntry 4 }

udldInfoPortOperationalStatus OBJECT-TYPE
      SYNTAX  INTEGER
      {   init(1)
      ,   inactive(2)
      ,   linkup(3)
      ,   advertisement(4)
      ,   detection(5)
      ,   extDetection(6)
      ,   shutdown(7)
      }
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
          "The OperationalStatus field of the port in UDLD info port table.
      Contains the udld operational state for the current port."
      ::= { udldInfoPortEntry 5 }

udldInfoPortBidirectionalStatus OBJECT-TYPE
      SYNTAX  INTEGER
      {   unknown(1)
      ,   unidirectional(2)
      ,   bidirectional(3)
      ,   loop(4)
      ,   neighborMismatch(5)
      }
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
            "The BidirectionalStatus field of the port in UDLD info port table.
      Contains the udld bidirectional state for the current port."
      ::= { udldInfoPortEntry 6 }

udldInfoPortInterval OBJECT-TYPE
      SYNTAX  INTEGER
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
            "The Interval field of the port in UDLD info port table.
      The duration, measured in seconds, of the interval during which
      UDLD probes are sent, after the linkup or detection phases.
      Its time unit is 1 second."
      ::= { udldInfoPortEntry 7 }

udldInfoPortTimeout OBJECT-TYPE
      SYNTAX  INTEGER
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
            "The Timeout field of the port in UDLD info port table.
      Length of the detection phase, measured in seconds."
      ::= { udldInfoPortEntry 8}

udldInfoPortNeighborCount OBJECT-TYPE
      SYNTAX  INTEGER
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
            "The Neighbor field of the port in UDLD info port table.
      Contains the number of udld neighbors for the current port."
      ::= { udldInfoPortEntry 9 }

udldInfoNeighborTable  OBJECT-TYPE
      SYNTAX  SEQUENCE OF UdldInfoNeighborEntry
      MAX-ACCESS  not-accessible
      STATUS  current
      DESCRIPTION
          "The table of UDLD port neighbor info."
      ::= { udldInfo 2 }

udldInfoNeighborEntry  OBJECT-TYPE
      SYNTAX  UdldInfoNeighborEntry
      MAX-ACCESS  not-accessible
      STATUS  current
      DESCRIPTION
          "A row inside UDLD port info table."
      INDEX  { udldInfoNeighborLocalPortIndex, udldInfoNeighborIndex }
      ::= { udldInfoNeighborTable 1 }

UdldInfoNeighborEntry ::= SEQUENCE
{     udldInfoNeighborLocalPortIndex   PortNumber
,     udldInfoNeighborIndex            Integer32
,     udldInfoNeighborExpiration       INTEGER
,     udldInfoNeighborDeviceName       DisplayString
,     udldInfoNeighborDeviceID         DisplayString
,     udldInfoNeighborPortID           DisplayString
}

udldInfoNeighborLocalPortIndex  OBJECT-TYPE
      SYNTAX  PortNumber
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
          "The index of the port for which neighbor information
      will be returned."
      ::= { udldInfoNeighborEntry 1 }

udldInfoNeighborIndex OBJECT-TYPE
      SYNTAX  Integer32
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
          "The index of the target neighbor among the port neighbors."
      ::= { udldInfoNeighborEntry 2 }

udldInfoNeighborExpiration  OBJECT-TYPE
      SYNTAX  INTEGER
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
          "Hold time for the given neighbor."
      ::= { udldInfoNeighborEntry 3 }
 
udldInfoNeighborDeviceName OBJECT-TYPE
      SYNTAX  DisplayString
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
          "Device name reported by neigbor."
      ::= { udldInfoNeighborEntry 4 }
 
udldInfoNeighborDeviceID OBJECT-TYPE
      SYNTAX  DisplayString
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
          "Device ID reported by neigbor."
      ::= { udldInfoNeighborEntry 5 }
 
udldInfoNeighborPortID OBJECT-TYPE
      SYNTAX  DisplayString
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
          "Port ID reported by neigbor."
      ::= { udldInfoNeighborEntry 6 }
--
--  } End of UDLD Info
--

-- FDB
fdbCurCfgStaticTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF FdbCurCfgStaticEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table of FDB static entries."
    ::= { fdb 2 }

fdbCurCfgStaticEntry OBJECT-TYPE
    SYNTAX  FdbCurCfgStaticEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A row in the fdb table."
    INDEX   { fdbCurCfgEntryIndex }
    ::= { fdbCurCfgStaticTable 1 }

FdbCurCfgStaticEntry ::= SEQUENCE {
    fdbCurCfgEntryIndex              Integer32,
    fdbCurCfgVlan                    Integer32,
    fdbCurCfgPort                    PortNumber,
    fdbCurCfgMac                     PhysAddress
    ,fdbCurCfgTrunk                   Integer32
    ,fdbCurCfgAdminkey                Integer32
    }

fdbCurCfgEntryIndex OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The fdb entry index"
    ::= { fdbCurCfgStaticEntry 1 }

fdbCurCfgVlan OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Add vlan for fdb entry index"
    ::= { fdbCurCfgStaticEntry 2 }

fdbCurCfgPort OBJECT-TYPE
    SYNTAX  PortNumber
    MAX-ACCESS   read-only
    STATUS  current
    DESCRIPTION
        "The MAC address port number."
    ::= { fdbCurCfgStaticEntry 3 }

fdbCurCfgMac OBJECT-TYPE
    SYNTAX  PhysAddress
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Add a fdb entry."
    ::= { fdbCurCfgStaticEntry 4 }

fdbCurCfgTrunk OBJECT-TYPE
    SYNTAX  Integer32 
    MAX-ACCESS   read-only
    STATUS  current
    DESCRIPTION
        "The MAC address trunk number."
    ::= { fdbCurCfgStaticEntry 5 }

fdbCurCfgAdminkey OBJECT-TYPE
    SYNTAX       Integer32 
    MAX-ACCESS   read-only
    STATUS  current
    DESCRIPTION
        "The MAC address LACP trunk adminkey."
    ::= { fdbCurCfgStaticEntry 6 }

fdbNewCfgStaticTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF FdbNewCfgStaticEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table of FDB static entries."
    ::= { fdb 3 }

fdbNewCfgStaticEntry OBJECT-TYPE
    SYNTAX  FdbNewCfgStaticEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A row in the fdb table."
    INDEX   { fdbNewCfgEntryIndex }
    ::= { fdbNewCfgStaticTable 1 }

FdbNewCfgStaticEntry ::= SEQUENCE {
    fdbNewCfgEntryIndex			Integer32,
    fdbNewCfgAddVlan	                Integer32,
    fdbNewCfgAddPort	                PortNumber,
    fdbNewCfgAddTrunk                   Integer32,
    fdbNewCfgAddAdminkey                Integer32,
    fdbNewCfgAddMac			PhysAddress,
    fdbNewCfgDelStaticEntry		INTEGER
    }

fdbNewCfgEntryIndex OBJECT-TYPE 
    SYNTAX  Integer32 
    MAX-ACCESS  read-only 
    STATUS  current 
    DESCRIPTION 
        "The fdb entry index" 
    ::= { fdbNewCfgStaticEntry 1 }

fdbNewCfgAddVlan OBJECT-TYPE 
    SYNTAX  Integer32 
    MAX-ACCESS  read-create
    STATUS  current 
    DESCRIPTION 
        "Add vlan for fdb entry index" 
    ::= { fdbNewCfgStaticEntry 2 }

fdbNewCfgAddPort OBJECT-TYPE
    SYNTAX  PortNumber
    MAX-ACCESS   read-create
    STATUS  current
    DESCRIPTION
        "The MAC address port number." 
    ::= { fdbNewCfgStaticEntry 3 }

fdbNewCfgAddMac OBJECT-TYPE
    SYNTAX  PhysAddress
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "Add a fdb entry, ex:0x00 0x01 0x02 0x03 0x04 0x05"
    ::= { fdbNewCfgStaticEntry 4 }

fdbNewCfgDelStaticEntry OBJECT-TYPE
    SYNTAX  INTEGER {
        other(1),
        delete(2)
        }
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "When set to the value of 2 (delete), the entire row is deleted.
         When read, other(1) is returned. Setting the value to anything
         other than 2(delete) has no effect on the state of the row."
    ::= { fdbNewCfgStaticEntry 5 }

fdbNewCfgAddTrunk OBJECT-TYPE
    SYNTAX  Integer32 
    MAX-ACCESS   read-create
    STATUS  current
    DESCRIPTION
        "The MAC address trunk number."
    ::= { fdbNewCfgStaticEntry 6 }

fdbNewCfgAddAdminkey OBJECT-TYPE
    SYNTAX  Integer32 
    MAX-ACCESS   read-create
    STATUS  current
    DESCRIPTION
        "The MAC address LACP trunk adminkey."
    ::= { fdbNewCfgStaticEntry 7 }

-- Multicast FDB

mcastFdbCurCfgTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF McastFdbCurCfgEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table of multicast FDB static entries."
    ::= { fdb 8 }

mcastFdbCurCfgEntry OBJECT-TYPE
    SYNTAX  McastFdbCurCfgEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A row in the multicast fdb table."
    INDEX   { mcastFdbCurCfgEntryIndex }
    ::= { mcastFdbCurCfgTable 1 }

McastFdbCurCfgEntry ::= SEQUENCE {
    mcastFdbCurCfgEntryIndex              Integer32,
    mcastFdbCurCfgVlan                    Integer32,
    mcastFdbCurCfgPorts                   PortNumber,
    mcastFdbCurCfgMac                     MacAddress 
    }

mcastFdbCurCfgEntryIndex OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The multicast fdb entry index"
    ::= { mcastFdbCurCfgEntry 1 }

mcastFdbCurCfgVlan OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Add vlan for multicast fdb entry index"
    ::= { mcastFdbCurCfgEntry 2 }

mcastFdbCurCfgPorts OBJECT-TYPE
    SYNTAX  PortNumber
    MAX-ACCESS   read-only
    STATUS  current
    DESCRIPTION
        "The multicast MAC address port list.  The ports are presented in bitmap format.
         in receiving order:

             OCTET 1  OCTET 2  .....
             xxxxxxxx xxxxxxxx .....
             ||    || |_ port 8
             ||    ||
             ||    ||___ port 7
             ||    |____ port 6
             ||      .    .   .
             ||_________ port 1
             |__________ reserved

         where x : 1 - The represented port belongs to the multicast MAC address.
                   0 - The represented port does not belong to the multicast MAC address."
    ::= { mcastFdbCurCfgEntry 3 }

mcastFdbCurCfgMac OBJECT-TYPE
    SYNTAX  MacAddress 
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Add a multicast fdb entry."
    ::= { mcastFdbCurCfgEntry 4 }

mcastFdbNewCfgTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF McastFdbNewCfgEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table of multicast FDB static entries."
    ::= { fdb 9 }

mcastFdbNewCfgEntry OBJECT-TYPE
    SYNTAX  McastFdbNewCfgEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A row in the multicast fdb table."
    INDEX   { mcastFdbNewCfgEntryIndex }
    ::= { mcastFdbNewCfgTable 1 }

McastFdbNewCfgEntry ::= SEQUENCE {
    mcastFdbNewCfgEntryIndex			Integer32,
    mcastFdbNewCfgAddVlan	                Integer32,
    mcastFdbNewCfgPorts                         OCTET STRING, 
    mcastFdbNewCfgAddPort	                PortNumber,
    mcastFdbNewCfgRemPort                       PortNumber,
    mcastFdbNewCfgAddMac			MacAddress,
    mcastFdbNewCfgDelStaticEntry       		INTEGER
    }

mcastFdbNewCfgEntryIndex OBJECT-TYPE 
    SYNTAX  Integer32 
    MAX-ACCESS  read-only 
    STATUS  current 
    DESCRIPTION 
        "The multicast fdb entry index" 
    ::= { mcastFdbNewCfgEntry 1 }

mcastFdbNewCfgAddVlan OBJECT-TYPE 
    SYNTAX  Integer32 
    MAX-ACCESS  read-create
    STATUS  current 
    DESCRIPTION 
        "Add vlan for multicast fdb entry index" 
    ::= { mcastFdbNewCfgEntry 2 }

mcastFdbNewCfgPorts OBJECT-TYPE
    SYNTAX  OCTET STRING 
    MAX-ACCESS   read-only
    STATUS  current
    DESCRIPTION
        "The multicast MAC address port list.  The ports are presented in bitmap format.
         in receiving order:

	     OCTET 1  OCTET 2  .....
             xxxxxxxx xxxxxxxx ..... 
             ||    || |_ port 8
             ||    ||  
             ||    ||___ port 7
             ||    |____ port 6
             ||      .    .   .
             ||_________ port 1
             |__________ reserved

         where x : 1 - The represented port belongs to the multicast MAC address. 
	           0 - The represented port does not belong to the multicast MAC address."
    ::= { mcastFdbNewCfgEntry 3 }

mcastFdbNewCfgAddPort OBJECT-TYPE
    SYNTAX  PortNumber
    MAX-ACCESS   read-create
    STATUS  current
    DESCRIPTION
        "The multicast MAC address port number to be added.  A '0'
         value is returned when read." 
    ::= { mcastFdbNewCfgEntry 4 }

mcastFdbNewCfgRemPort OBJECT-TYPE
    SYNTAX  PortNumber
    MAX-ACCESS   read-create
    STATUS  current
    DESCRIPTION
        "The multicast MAC address port number to be removed.  A '0'
         value is returned when read."
    ::= { mcastFdbNewCfgEntry 5 }

mcastFdbNewCfgAddMac OBJECT-TYPE
    SYNTAX  MacAddress 
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "Add a multicast fdb entry, ex:0x00 0x01 0x02 0x03 0x04 0x05"
    ::= { mcastFdbNewCfgEntry 6 }

mcastFdbNewCfgDelStaticEntry OBJECT-TYPE
    SYNTAX  INTEGER {
        other(1),
        delete(2)
        }
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "When set to the value of 2 (delete), the entire row is deleted.
         When read, other(1) is returned. Setting the value to anything
         other than 2(delete) has no effect on the state of the row."
    ::= { mcastFdbNewCfgEntry 7 }




oamInfoPortTable OBJECT-TYPE
    SYNTAX SEQUENCE OF OAMInfoPortEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "The table of OAM port information."
    ::= { oamInfo 1 }

oamInfoPortEntry OBJECT-TYPE
    SYNTAX OAMInfoPortEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "Information about OAM Port"
    INDEX { oamInfoPortIndex }
    ::= { oamInfoPortTable 1 }
 
OAMInfoPortEntry ::= SEQUENCE {
    oamInfoPortIndex                PortNumber,	
    oamInfoPortLocalState           INTEGER,
    oamInfoPortLocalMode            INTEGER,
    oamInfoPortLocalLinkStatus	    INTEGER,
    oamInfoPortLocalStable  	    INTEGER,
    oamInfoPortLocalSatisfied 	    INTEGER,
    oamInfoPortLocalEvaluating	    INTEGER,
    oamInfoPortRemoteMode  	    INTEGER,
    oamInfoPortRemoteMAC  	    PhysAddress,
    oamInfoPortRemoteStable  	    INTEGER,
    oamInfoPortRemoteStateValid     INTEGER,	
    oamInfoPortRemoteEvaluating     INTEGER
    }
 
oamInfoPortIndex OBJECT-TYPE
    SYNTAX PortNumber
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"The OAM Port number for which the table is related."
    ::= { oamInfoPortEntry 1}

oamInfoPortLocalState OBJECT-TYPE
    SYNTAX INTEGER {
      enabled(0),
      disabled(1)
    }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	" OAM local port state" 
    ::= { oamInfoPortEntry 2 }

oamInfoPortLocalMode OBJECT-TYPE
    SYNTAX INTEGER {
      active(0),
      passive(1)
    }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	" OAM local port mode" 
    ::= { oamInfoPortEntry 3 }
    
oamInfoPortLocalLinkStatus OBJECT-TYPE
    SYNTAX INTEGER {
      ok(0),
      fail(1)
    }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	" OAM local port link status" 
    ::= { oamInfoPortEntry 4 }

oamInfoPortLocalStable OBJECT-TYPE
    SYNTAX INTEGER {
      true(0),
      false(1)
    }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	" OAM local port stable" 
    ::= { oamInfoPortEntry 5 }

oamInfoPortLocalSatisfied OBJECT-TYPE
    SYNTAX INTEGER {
      true(0),
      false(1)
    }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	" OAM local port satisfied" 
    ::= { oamInfoPortEntry 6 }

oamInfoPortLocalEvaluating OBJECT-TYPE
    SYNTAX INTEGER {
      true(0),
      false(1)
    }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	" OAM local port evaluating" 
    ::= { oamInfoPortEntry 7 }

oamInfoPortRemoteMode OBJECT-TYPE
    SYNTAX INTEGER {
      active(0),
      passive(1)
    }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	" OAM remote port mode" 
    ::= { oamInfoPortEntry 8 }

oamInfoPortRemoteMAC OBJECT-TYPE
    SYNTAX  PhysAddress
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	" OAM remote port MAC address" 
    ::= { oamInfoPortEntry 9 }

oamInfoPortRemoteStable OBJECT-TYPE
    SYNTAX INTEGER {
      true(0),
      false(1)
    }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	" OAM remote port stable" 
    ::= { oamInfoPortEntry 10 }

oamInfoPortRemoteStateValid OBJECT-TYPE
    SYNTAX INTEGER {
      true(0),
      false(1)
    }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	" OAM remote port state valid" 
    ::= { oamInfoPortEntry 11 }
	
oamInfoPortRemoteEvaluating OBJECT-TYPE
    SYNTAX INTEGER {
      true(0),
      false(1)
    }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	" OAM remote port evaluating" 
    ::= { oamInfoPortEntry 12 }

--
-- OAM Stats
--
oamStatsPortTable OBJECT-TYPE
    SYNTAX SEQUENCE OF OAMStatsPortEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "The table of OAM port statistics."
    ::= { oamStats 1 }

oamStatsPortEntry OBJECT-TYPE
    SYNTAX OAMStatsPortEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "Statistics about OAM Port"
    INDEX { oamStatsPortIndex }
    ::= { oamStatsPortTable 1 }


OAMStatsPortEntry ::= SEQUENCE {
    oamStatsPortIndex                  PortNumber,
    oamStatsPortInfoTx                 INTEGER,
    oamStatsPortInfoRx                 INTEGER,
    oamStatsPortUnsupTx                INTEGER,
    oamStatsPortUnsupRx                INTEGER,
    oamStatsPortLocalLinkFaults        INTEGER,
    oamStatsPortLocalCriticalEvents    INTEGER,
    oamStatsPortLocalDyingGasps        INTEGER,
    oamStatsPortRemoteLinkFaults       INTEGER,
    oamStatsPortRemoteCriticalEvents   INTEGER,
    oamStatsPortRemoteDyingGasps       INTEGER
    }

oamStatsPortIndex OBJECT-TYPE
    SYNTAX PortNumber
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The OAM Port number for which the table is related."
    ::= { oamStatsPortEntry 1}

oamStatsPortInfoTx OBJECT-TYPE
    SYNTAX INTEGER
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The number of transmitted OAM information packets"
    ::= { oamStatsPortEntry 2}

oamStatsPortInfoRx OBJECT-TYPE
    SYNTAX INTEGER
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The number of received OAM information packets"
    ::= { oamStatsPortEntry 3}

oamStatsPortUnsupTx OBJECT-TYPE
    SYNTAX INTEGER
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The number of transmitted OAM unsupported packets"
    ::= { oamStatsPortEntry 4}

oamStatsPortUnsupRx OBJECT-TYPE
    SYNTAX INTEGER
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The number of received OAM unsupported packets"
    ::= { oamStatsPortEntry 5}

oamStatsPortLocalLinkFaults  OBJECT-TYPE
    SYNTAX INTEGER
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The number of local OAM link fault packets"
    ::= { oamStatsPortEntry 6}

oamStatsPortLocalCriticalEvents  OBJECT-TYPE
    SYNTAX INTEGER
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The number of local OAM critical event packets"
    ::= { oamStatsPortEntry 7}

oamStatsPortLocalDyingGasps  OBJECT-TYPE
    SYNTAX INTEGER
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The number of local OAM dying gasp packets"
    ::= { oamStatsPortEntry 8}

oamStatsPortRemoteLinkFaults  OBJECT-TYPE
    SYNTAX INTEGER
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The number of remote OAM link fault packets"
    ::= { oamStatsPortEntry 9}

oamStatsPortRemoteCriticalEvents  OBJECT-TYPE
    SYNTAX INTEGER
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The number of remote OAM critical event packets"
    ::= { oamStatsPortEntry 10}

oamStatsPortRemoteDyingGasps  OBJECT-TYPE
    SYNTAX INTEGER
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The number of remote OAM dying gasp packets"
    ::= { oamStatsPortEntry 11}


-- Trunk Group Information

trunkGroupInfoTable OBJECT-TYPE
    SYNTAX SEQUENCE OF TrunkGroupInfoTableEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The table of trunk group information."
    ::= { trunkGroupInfo 1 }

trunkGroupInfoTableEntry OBJECT-TYPE
    SYNTAX TrunkGroupInfoTableEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "A row in trunk group information table."
    INDEX { trunkGroupInfoIndex }
    ::= { trunkGroupInfoTable 1 }

TrunkGroupInfoTableEntry ::= SEQUENCE {
    trunkGroupInfoIndex       Integer32,
    trunkGroupInfoState       INTEGER,
    trunkGroupInfoProtocol    INTEGER,
    trunkGroupInfoPorts       OCTET STRING
    }

trunkGroupInfoIndex OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The identifier of the trunk group."
    ::= { trunkGroupInfoTableEntry 1 }

trunkGroupInfoState OBJECT-TYPE
    SYNTAX  INTEGER  {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Trunk group state."
    ::= { trunkGroupInfoTableEntry 2 }


trunkGroupInfoPorts OBJECT-TYPE
    SYNTAX  OCTET STRING
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The port list in the trunk group. The ports are presented in
         bitmap format.

         in receiving order:

             OCTET 1  OCTET 2  .....
             xxxxxxxx xxxxxxxx .....
             ||    || |_ port 8
             ||    ||
             ||    ||___ port 7
             ||    |____ port 6
             ||      .    .   .
             ||_________ port 1
             |__________ reserved

         where x : 1 - The represented port belongs to the trunk group
                   0 - The represented port does not belong to the trunk group"
    ::= { trunkGroupInfoTableEntry 3 }

trunkGroupInfoProtocol OBJECT-TYPE
    SYNTAX  INTEGER  {
        static(1),
        lacp(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Trunk group protocol
         Static - static trunk group
         Lacp - dynamic trunk group"
    ::= { trunkGroupInfoTableEntry 4 }

trunkGroupInfoPortTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF TrunkGroupInfoPortTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table of Trunk Group Info."
    ::= {trunkGroupInfo 2 }

trunkGroupInfoPortTableEntry OBJECT-TYPE
    SYNTAX  TrunkGroupInfoPortTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A row in the Trunk Info table."
    INDEX  { trunkGroupInfoPortTrunkId, trunkGroupInfoPortPortId }
    ::= { trunkGroupInfoPortTable 1 }

TrunkGroupInfoPortTableEntry ::= SEQUENCE {
    trunkGroupInfoPortTrunkId   Integer32,
    trunkGroupInfoPortPortId    PortNumber,
    trunkGroupInfoPortStatus    INTEGER
    }

trunkGroupInfoPortTrunkId OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The Trunk identifier."
    ::= { trunkGroupInfoPortTableEntry 1 }

trunkGroupInfoPortPortId OBJECT-TYPE
    SYNTAX  PortNumber
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The Port identifier."
    ::= { trunkGroupInfoPortTableEntry 2 }

trunkGroupInfoPortStatus OBJECT-TYPE
    SYNTAX  INTEGER{
        down(0),

        blocking(1),
        forwarding(2)

        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The Port Status."
    ::= { trunkGroupInfoPortTableEntry 3 }


-- LACP Statistics

lacpStatsTable OBJECT-TYPE
    SYNTAX SEQUENCE OF LacpStatsTableEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The table of LACP Stats."
	::= {lacpStats 1}

lacpStatsTableEntry OBJECT-TYPE
    SYNTAX LacpStatsTableEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Lacp status info."
    INDEX { lacpStatsIndex }
    ::= { lacpStatsTable 1 }

LacpStatsTableEntry ::= SEQUENCE {
   lacpStatsIndex PortNumber,
   lacpdusRx Integer32,
   markerpdusRx Integer32,
   markerresponsepdusRx Integer32,
   unknownRx Integer32,
   illegalRx Integer32,
   lacpdusTx Integer32,
   markerpdusTx Integer32,
   markerresponsepdusTx Integer32
   ,lacpClearStats INTEGER
}

lacpStatsIndex OBJECT-TYPE
  SYNTAX PortNumber
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
	"Index"
  ::= {lacpStatsTableEntry 1}

lacpdusRx OBJECT-TYPE
  SYNTAX Integer32
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
	"Valid LACPDUs received"
  ::= {lacpStatsTableEntry 2}

markerpdusRx OBJECT-TYPE
  SYNTAX Integer32
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
	"Valid Marker PDUs received"
  ::= {lacpStatsTableEntry 3}

markerresponsepdusRx OBJECT-TYPE
  SYNTAX Integer32
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
	"Valid Marker Rsp PDUs received"
  ::= {lacpStatsTableEntry 4}

unknownRx OBJECT-TYPE
  SYNTAX Integer32
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
	"Unknown version/TLV type"
  ::= {lacpStatsTableEntry 5}

illegalRx OBJECT-TYPE
  SYNTAX Integer32
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
	"Illegal subtype received"
  ::= {lacpStatsTableEntry 6}

lacpdusTx OBJECT-TYPE
  SYNTAX Integer32
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
	"LACPDUs transmitted"
  ::= {lacpStatsTableEntry 7}

markerpdusTx OBJECT-TYPE
  SYNTAX Integer32
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
	"Market PDUs transmitted"
  ::= {lacpStatsTableEntry 8}

markerresponsepdusTx OBJECT-TYPE
  SYNTAX Integer32
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
	"Marker Rsp PDUs transmitted "
  ::= {lacpStatsTableEntry 9}

lacpClearStats  OBJECT-TYPE
    SYNTAX  INTEGER {
        ok(1),
        clear(2)
        }
    MAX-ACCESS  read-write
    STATUS  current 
    DESCRIPTION 
        "Setting this to clear(2) results in clearing the LACP statistics."
    ::= { lacpStatsTableEntry 10 }


-- FDB Statistics


fdbStatsCurrent OBJECT-TYPE
    SYNTAX  Gauge32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Current number of entries in the Forwarding Database."
    ::= { fdbStats 3 }

fdbStatsHiwat OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Highest number of entries recorded at any given time in the 
         Forwarding Database."
    ::= { fdbStats 4 }


fdbStatsClear OBJECT-TYPE
    SYNTAX INTEGER {
      ok(1),
      clear(2)
      }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Clear FDB statistics"
    ::= { fdbStats 11 }

-- STP Statistics

stgStatsPortTable OBJECT-TYPE
    SYNTAX SEQUENCE OF StgStatsPortTableEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The table of Spanning Tree Group port statistics."
    ::= { stpStats 1 }

stgStatsPortTableEntry OBJECT-TYPE
    SYNTAX StgStatsPortTableEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Statistics about port of a particular Spanning Tree Group."
    INDEX { stgStatsStpIndex, stgStatsPortIndex }
    ::= { stgStatsPortTable 1 }

StgStatsPortTableEntry ::= SEQUENCE {
    stgStatsStpIndex            Integer32,
    stgStatsPortIndex	        PortNumber,
    stgStatsPortRcvCfgBpdus     Counter32,
    stgStatsPortRcvTcnBpdus     Counter32,
    stgStatsPortXmtCfgBpdus     Counter32,
    stgStatsPortXmtTcnBpdus     Counter32 
    }

stgStatsStpIndex OBJECT-TYPE
    SYNTAX Integer32  
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The identifier of a particular Spanning Tree Group."
    ::= { stgStatsPortTableEntry 1 }

stgStatsPortIndex OBJECT-TYPE
    SYNTAX PortNumber
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The port identifier of a particular Spanning Tree Group."
    ::= { stgStatsPortTableEntry 2 }

stgStatsPortRcvCfgBpdus OBJECT-TYPE
    SYNTAX Counter32 
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Number of Configuration BPDU's received on this port."
    ::= { stgStatsPortTableEntry 3 }

stgStatsPortRcvTcnBpdus OBJECT-TYPE
    SYNTAX Counter32 
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Number of TCN BPDU's received on this port."
    ::= { stgStatsPortTableEntry 4 }

stgStatsPortXmtCfgBpdus OBJECT-TYPE
    SYNTAX Counter32 
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Number of Configuration BPDU's trasmitted from the port."
    ::= { stgStatsPortTableEntry 5 }

stgStatsPortXmtTcnBpdus OBJECT-TYPE
    SYNTAX Counter32 
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Number of TCN BPDU's trasmitted from the port."
    ::= { stgStatsPortTableEntry 6 }

fdbClear OBJECT-TYPE
    SYNTAX  INTEGER {
        ok(1),
        clear(2)
        }
    MAX-ACCESS  read-write
    STATUS  current 
    DESCRIPTION
        "Setting this value to clear(2) clears the entire master FDB."
    ::= { fdbInfo 1 }


--  FDB table
fdbTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF FdbEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table of FDB entries."
    ::= { fdbInfo 2 }

fdbEntry OBJECT-TYPE
    SYNTAX  FdbEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A row in the FDB table"
    INDEX   { fdbMacAddr }
    ::= { fdbTable 1 }

FdbEntry ::= SEQUENCE {
    fdbMacAddr            MacAddress,
    fdbVlan       	  Integer32,
    fdbSrcPort            PortNumber,
    fdbSrcTrunk           Integer32,
    fdbState              INTEGER
    ,fdbStatus             Integer32
    }

fdbMacAddr OBJECT-TYPE
    SYNTAX  MacAddress
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The MAC address for the FDB entry."
    ::= { fdbEntry 1 }

fdbVlan OBJECT-TYPE 
    SYNTAX  Integer32 
    MAX-ACCESS  read-only 
    STATUS  current 
    DESCRIPTION 
        "The VLAN ID for the FDB entry." 
    ::= { fdbEntry 2 }

fdbSrcPort OBJECT-TYPE  
    SYNTAX  PortNumber 
    MAX-ACCESS  read-only  
    STATUS  current  
    DESCRIPTION  
       "Either the value '0', or the port number of the port on which a frame 
        having a source address equal to the value of the corresponding 
        instance has been seen.  A value of '0' indicates that the port 
        number has not been learned but that the bridge does have some
        forwarding/filtering information about this address."
    ::= { fdbEntry 3 }

fdbState OBJECT-TYPE  
    SYNTAX  INTEGER {
	unknown(1),
	forward(2),
	trunk(3)
        }
    MAX-ACCESS  read-only  
    STATUS  current  
    DESCRIPTION  
        "The state of the FDB entry. The meanings of the values are :
         unknown(1) : the MAC address has not yet been learned by the switch
                      but has only been seen as a destination address
         forward(3) : the MAC address has been learned by the switch
         flood(4)   : the MAC address is a multicast destination address 
         trunk(6)   : frames with this MAC address are forwarded to trunk
                      group
         vir(7)     : frames with this MAC address are forwarded for L3 
                      processing"
    ::= { fdbEntry 4 }


fdbSrcTrunk OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
       "Either the value '0', or the trunk number of the trunk on which a frame
        having a source address equal to the value of the corresponding
        instance has been seen.  A value of '0' indicates that the source
        address is not associated with a trunk."
    ::= { fdbEntry 7 }

fdbStatus OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
       "'1' if it is permanent 
        '0' if it is not permanent"
    ::= { fdbEntry 8 }

--  Multicast FDB table
mcastFdbTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF McastFdbEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table of static multicast FDB entries."
    ::= { fdbInfo 3 }

mcastFdbEntry OBJECT-TYPE
    SYNTAX  McastFdbEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A row in the static multicast FDB table"
    INDEX   { mcastFdbEntryIndex }
    ::= { mcastFdbTable 1 }

McastFdbEntry ::= SEQUENCE {
    mcastFdbEntryIndex         Integer32,
    mcastFdbMacAddr            MacAddress,
    mcastFdbVlan               Integer32,
    mcastFdbSrcPorts           PortNumber
    }

mcastFdbEntryIndex OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The static multicast fdb entry index"
    ::= { mcastFdbEntry 1 }

mcastFdbMacAddr OBJECT-TYPE
    SYNTAX  MacAddress
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The static multicast MAC address for the FDB entry."
    ::= { mcastFdbEntry 2 }

mcastFdbVlan OBJECT-TYPE 
    SYNTAX  Integer32 
    MAX-ACCESS  read-only 
    STATUS  current 
    DESCRIPTION 
        "The VLAN ID for the FDB entry." 
    ::= { mcastFdbEntry 3 }

mcastFdbSrcPorts OBJECT-TYPE
    SYNTAX  PortNumber
    MAX-ACCESS   read-only
    STATUS  current
    DESCRIPTION
        "The multicast MAC address port list.  The ports are presented in bitmap format.
         in receiving order:

             OCTET 1  OCTET 2  .....
             xxxxxxxx xxxxxxxx .....
             ||    || |_ port 8
             ||    ||
             ||    ||___ port 7
             ||    |____ port 6
             ||      .    .   .
             ||_________ port 1
             |__________ reserved

         where x : 1 - The represented port belongs to the multicast MAC address.
                   0 - The represented port does not belong to the multicast MAC address."
    ::= { mcastFdbEntry 4 }

-- STP Information

stpInfoTable OBJECT-TYPE
    SYNTAX SEQUENCE OF StpInfoTableEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The table of Spanning Tree Group information."
    ::= { stpInfo 1 }

stpInfoTableEntry OBJECT-TYPE
    SYNTAX StpInfoTableEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Information about a particular Spanning Tree Group."
    INDEX { stpInfoIndex }
    ::= { stpInfoTable 1 }

StpInfoTableEntry ::= SEQUENCE {
    stpInfoIndex              Integer32,
    stpInfoTimeSinceTopChange TimeTicks,
    stpInfoTopChanges         Counter32,
    stpInfoDesignatedRoot     BridgeId,
    stpInfoRootCost           Integer32,
    stpInfoRootPort           PortNumber,
    stpInfoMaxAge             Integer32,
    stpInfoHelloTime          Integer32,
    stpInfoForwardDelay       Integer32,
    stpInfoHoldTime           Integer32
    }

stpInfoIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The identifier of a particular Spanning Tree Group.  This is also
         index to the entLogicalTable of Entity MIB."
    ::= { stpInfoTableEntry 1 }

stpInfoTimeSinceTopChange OBJECT-TYPE
    SYNTAX  TimeTicks
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The time (in hundredths of a second) since the last time a topology 
         change was detected by the bridge entity."
    ::= { stpInfoTableEntry 2 }

stpInfoTopChanges OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of topology changes detected by this bridge since 
         the management entity was last reset or initialized."
    ::= { stpInfoTableEntry 3 }

stpInfoDesignatedRoot OBJECT-TYPE
    SYNTAX  BridgeId
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The bridge identifier of the root of the spanning tree as determined 
         by the Spanning Tree Protocol as executed by this node.  This value 
         is used as the Root Identifier parameter in all Configuration Bridge 
         PDUs originated by this node."
    ::= { stpInfoTableEntry 4 }

stpInfoRootCost OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The cost of the path to the root as seen from this bridge."
    ::= { stpInfoTableEntry 5 }

stpInfoRootPort OBJECT-TYPE
    SYNTAX  PortNumber
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The port number of the port which offers the lowest cost path from 
         this bridge to the root bridge."
    ::= { stpInfoTableEntry 6 }

stpInfoMaxAge OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The maximum age of Spanning Tree Protocol information learned from 
         the network on any port before it is discarded, in units of 
         hundredths of a second.  This is the actual value that this bridge is
         currently using."
    ::= { stpInfoTableEntry 7 }

stpInfoHelloTime OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The amount of time between the transmission of Configuration bridge 
         PDUs by this node on any port when it is the root of the spanning 
         tree or trying to become so, in units of hundredths of a second.
         This is the actual value that this bridge is currently using."
    ::= { stpInfoTableEntry 8 }

stpInfoForwardDelay OBJECT-TYPE
     SYNTAX  Integer32
     MAX-ACCESS  read-only
     STATUS  current
     DESCRIPTION
         "This time value, measured in units of hundredths of a second, 
          controls how fast a port changes its spanning state when moving 
          towards the Forwarding state.  The value determines how long the port
          stays in each of the Listening and Learning states, which precede 
          the Forwarding state.  This value is also used, when a topology 
          change has been detected and is underway, to age all dynamic entries
          in the Forwarding Database."
    ::= { stpInfoTableEntry 9 }

stpInfoHoldTime OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "This time value determines the interval length during which no more 
         than two Configuration bridge PDUs shall be transmitted by this node,
         in units of hundredths of a second."
    ::= { stpInfoTableEntry 10 }

stpInfoPortTable OBJECT-TYPE
    SYNTAX SEQUENCE OF StpInfoPortTableEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The table of Spanning Tree Group port information."
    ::= { stpInfo 2 }

stpInfoPortTableEntry OBJECT-TYPE
    SYNTAX StpInfoPortTableEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Information about port configuration for a particular Spanning Tree
         Group."
    INDEX { stpInfoPortStpIndex, stpInfoPortIndex }
    ::= { stpInfoPortTable 1 }

StpInfoPortTableEntry ::= SEQUENCE {
    stpInfoPortStpIndex           Integer32,
    stpInfoPortIndex              PortNumber,
    stpInfoPortState              INTEGER,
    stpInfoPortDesignatedRoot     BridgeId,
    stpInfoPortDesignatedCost     Integer32,
    stpInfoPortDesignatedBridge   BridgeId,
    stpInfoPortDesignatedPort     OCTET STRING,
    stpInfoPortForwardTransitions Counter32,
    stpInfoPortRole               INTEGER,
    stpInfoPortLinkType           INTEGER,
    stpInfoPortEdge               INTEGER,
    stpInfoPortExtGuard           INTEGER,
    stpInfoPortPathCost           Integer32,
    stpInfoPortPriority           Integer32
   }

stpInfoPortStpIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The identifier of a particular Spanning Tree Group."
    ::= { stpInfoPortTableEntry 1 }

stpInfoPortIndex OBJECT-TYPE
    SYNTAX PortNumber
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The port identifier of a particular Spanning Tree Group."
    ::= { stpInfoPortTableEntry 2 }

stpInfoPortState OBJECT-TYPE
    SYNTAX  INTEGER {
        disabled(1),
        blocking(2),
        listening(3),
        learning(4),
        forwarding(5),
        discarding(7),
        broken(6)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The port's current state as defined by application of the Spanning 
         Tree Protocol.  This state controls what action a port takes on
         reception of a frame.  If the bridge has detected a port that is 
         malfunctioning it will place that port into the broken(6) state.  
         For ports which are disabled, this object will have a value of 
         disabled(1)."
    ::= { stpInfoPortTableEntry 3 }

stpInfoPortDesignatedRoot OBJECT-TYPE
    SYNTAX  BridgeId
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The unique Bridge Identifier of the Bridge recorded as the Root in 
         the Configuration BPDUs transmitted by the Designated Bridge for the
         segment to which the port is attached."
    ::= { stpInfoPortTableEntry 4 }

stpInfoPortDesignatedCost OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The path cost of the Designated Port of the segment connected to this
         port.  This value is compared to the Root Path Cost field in received
         bridge PDUs."
    ::= { stpInfoPortTableEntry 5 }

stpInfoPortDesignatedBridge OBJECT-TYPE
    SYNTAX  BridgeId
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The Bridge Identifier of the bridge which this port considers to be 
         the Designated Bridge for this port's segment."
    ::= { stpInfoPortTableEntry 6 }

stpInfoPortDesignatedPort OBJECT-TYPE
    SYNTAX  OCTET STRING (SIZE (2))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The Port Identifier of the port on the Designated Bridge for this 
         port's segment."
    ::= { stpInfoPortTableEntry 7 }

stpInfoPortForwardTransitions OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The number of times this port has transitioned from the Learning 
         state to the Forwarding state."
    ::= { stpInfoPortTableEntry 8 }

stpInfoPortPathCost OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The path cost of the port."
    ::= { stpInfoPortTableEntry 9 }

stpInfoPortRole OBJECT-TYPE
    SYNTAX  INTEGER {
        disabled(1),
        alternate(2),
        backup(3),
        root(4),
        designated(5),
        master(6),
        unknown(7)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The port role. Returns unknown(7) when MSTP/RSTP is not enabled,
         otherwise returns appropriate port role."
    ::= { stpInfoPortTableEntry 10 }

stpInfoPortLinkType OBJECT-TYPE
    SYNTAX  INTEGER {
        p2p(1),
        shared(2),
        unknown(3)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The point-to-point status of the LAN segment attached
         to this port.  A value of p2p (1) indicates that this port is being
         treated as if it is connected to a point-to-point link.
         A value of shared(2) indicates that this port is being treated as
         having a shared media connection."
    ::= { stpInfoPortTableEntry 11 }

stpInfoPortEdge OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The port is an edge port or not. Returns disabled(2) when the port is
	 not an edge port and returns enabled(1) when it is an edge port."
    ::= { stpInfoPortTableEntry 12 }

stpInfoPortExtGuard OBJECT-TYPE
    SYNTAX  INTEGER {
        loop-inc(1),
        root-inc(2),
        normal(0)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Current STP guard state. Not include BPDU Guard."
    ::= { stpInfoPortTableEntry 13 }

stpInfoPortPriority OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The four most significant bits of the Port Identifier of the 
         Spanning Tree instance can be modified by setting this value."
    ::= { stpInfoPortTableEntry 14 }



-- LACP information

lacpInfoAggrTable OBJECT-TYPE
    SYNTAX SEQUENCE OF LacpInfoAggrTableEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The table of LACP aggregator information."
    ::= { lacpInfo 1 }

lacpInfoAggrTableEntry OBJECT-TYPE
    SYNTAX LacpInfoAggrTableEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Information about a LACP aggregator."
    INDEX { lacpInfoAggrIndex }
    ::= { lacpInfoAggrTable 1 }

LacpInfoAggrTableEntry ::= SEQUENCE {
    lacpInfoAggrIndex           PortNumber,
    lacpInfoAggrId		Integer32,
    lacpInfoAggrMac		DisplayString,
    lacpInfoAggrActSysPrio	Integer32,
    lacpInfoAggrActSysId	DisplayString,
    lacpInfoAggrIndivState	INTEGER,
    lacpInfoAggrActAdminKey	Integer32,
    lacpInfoAggrActOperKey	Integer32,
    lacpInfoAggrPartSysPrio	Integer32,
    lacpInfoAggrPartSysId	DisplayString,
    lacpInfoAggrPartOperKey	Integer32,
    lacpInfoAggrReadyState	INTEGER,
    lacpInfoAggrNumPorts	Integer32
    }

lacpInfoAggrIndex OBJECT-TYPE
    SYNTAX PortNumber
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The aggregator identifier."
    ::= { lacpInfoAggrTableEntry 1 }

lacpInfoAggrId OBJECT-TYPE 
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "LACP aggregator ID"
    ::= { lacpInfoAggrTableEntry 2 }

lacpInfoAggrMac OBJECT-TYPE 
    SYNTAX  DisplayString
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "LACP aggregator MAC address"
    ::= { lacpInfoAggrTableEntry 3 }

lacpInfoAggrActSysPrio OBJECT-TYPE 
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "LACP aggregator actor system priority"
    ::= { lacpInfoAggrTableEntry 4 }

lacpInfoAggrActSysId OBJECT-TYPE 
    SYNTAX  DisplayString
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "LACP aggregator actor system ID"
    ::= { lacpInfoAggrTableEntry 5 }

lacpInfoAggrIndivState OBJECT-TYPE 
    SYNTAX  INTEGER {
        true(1),
        false(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "LACP aggregator individual state"
    ::= { lacpInfoAggrTableEntry 6 }

lacpInfoAggrActAdminKey OBJECT-TYPE 
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "LACP aggregator actor admin key"
    ::= { lacpInfoAggrTableEntry 7 }

lacpInfoAggrActOperKey OBJECT-TYPE 
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "LACP aggregator actor oper key"
    ::= { lacpInfoAggrTableEntry 8 }

lacpInfoAggrPartSysPrio OBJECT-TYPE 
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "LACP aggregator partner system priority"
    ::= { lacpInfoAggrTableEntry 9 }

lacpInfoAggrPartSysId OBJECT-TYPE 
    SYNTAX  DisplayString
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "LACP aggregator partner system ID"
    ::= { lacpInfoAggrTableEntry 10 }

lacpInfoAggrPartOperKey OBJECT-TYPE 
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "LACP aggregator partner oper key"
    ::= { lacpInfoAggrTableEntry 11 }

lacpInfoAggrReadyState OBJECT-TYPE 
    SYNTAX  INTEGER {
        true(1),
        false(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "LACP aggregator ready state"
    ::= { lacpInfoAggrTableEntry 12 }

lacpInfoAggrNumPorts OBJECT-TYPE 
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Number of ports in aggregator"
    ::= { lacpInfoAggrTableEntry 13 }


lacpInfoPort OBJECT IDENTIFIER ::= { lacpInfo 2 }

lacpInfoPortGeneralTable OBJECT-TYPE
    SYNTAX SEQUENCE OF LacpInfoPortGeneralTableEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The table of LACP port general information."
    ::= { lacpInfoPort 1 }

lacpInfoPortGeneralTableEntry OBJECT-TYPE
    SYNTAX LacpInfoPortGeneralTableEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "General information about a LACP port."
    INDEX { lacpInfoPortGeneralIndex }
    ::= { lacpInfoPortGeneralTable 1 }

LacpInfoPortGeneralTableEntry ::= SEQUENCE {
    lacpInfoPortGeneralIndex		PortNumber,
    lacpInfoPortLacpEna 		INTEGER,
    lacpInfoPortAdminEna	 	INTEGER,
    lacpInfoPortActSysId		DisplayString,
    lacpInfoPortActSysPrio		Integer32,
    lacpInfoPortActAdminKey 		Integer32,
    lacpInfoPortActOperKey 		Integer32,
    lacpInfoPortActPortNum 		Integer32,
    lacpInfoPortActPortPrio 		Integer32,
    lacpInfoPortIndivState 		INTEGER,
    lacpInfoSelAggrId 			Integer32,
    lacpInfoAttAggrId 			Integer32,
    lacpInfoPortReadyN 			INTEGER,
    lacpInfoPortNtt 			INTEGER,
    lacpInfoPortSelected 		INTEGER,
    lacpInfoPortMoved 			INTEGER,
    lacpInfoCollDetState 		INTEGER,
    lacpInfoPortRxState 		DisplayString, 
    lacpInfoPortMuxState 		DisplayString,
    lacpInfoPortPerState 		DisplayString,
    lacpInfoPortPerTraTimer		Integer32,
    lacpInfoPortCurWhileTimer		Integer32,
    lacpInfoPortOperState		INTEGER
    }

lacpInfoPortGeneralIndex OBJECT-TYPE
    SYNTAX PortNumber
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The port identifier."
    ::= { lacpInfoPortGeneralTableEntry 1 }

lacpInfoPortLacpEna OBJECT-TYPE 
    SYNTAX  INTEGER {
        true(1),
        false(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "LACP enabled on port"
    ::= { lacpInfoPortGeneralTableEntry 2 }

lacpInfoPortAdminEna OBJECT-TYPE 
    SYNTAX  INTEGER {
        true(1),
        false(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "LACP port admin enabled"
    ::= { lacpInfoPortGeneralTableEntry 3 }

lacpInfoPortActSysId OBJECT-TYPE
    SYNTAX  DisplayString
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "LACP port actor system ID"
    ::= { lacpInfoPortGeneralTableEntry 4 }

lacpInfoPortActSysPrio OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "LACP port actor system priority"
    ::= { lacpInfoPortGeneralTableEntry 5 }

lacpInfoPortActAdminKey OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "LACP port actor admin key"
    ::= { lacpInfoPortGeneralTableEntry 6 }

lacpInfoPortActOperKey OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "LACP port actor oper key"
    ::= { lacpInfoPortGeneralTableEntry 7 }

lacpInfoPortActPortNum OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "LACP port number"
    ::= { lacpInfoPortGeneralTableEntry 8 }

lacpInfoPortActPortPrio OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "LACP port priority"
    ::= { lacpInfoPortGeneralTableEntry 9 }

lacpInfoPortIndivState OBJECT-TYPE 
    SYNTAX  INTEGER {
        true(1),
        false(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "LACP port individual state"
    ::= { lacpInfoPortGeneralTableEntry 10 }

lacpInfoSelAggrId OBJECT-TYPE 
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "LACP port selected aggregator ID"
    ::= { lacpInfoPortGeneralTableEntry 11 }

lacpInfoAttAggrId OBJECT-TYPE 
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "LACP port attached aggregator ID"
    ::= { lacpInfoPortGeneralTableEntry 12 }

lacpInfoPortReadyN OBJECT-TYPE
    SYNTAX  INTEGER {
        true(1),
        false(2)
        }
    MAX-ACCESS read-only
    STATUS  current
    DESCRIPTION
        "True value for Ready_N flag indicates that the wait while timer 
         has expired and it is waiting to attach to an aggregator. 
         There is one Ready_N value for each port."
    ::= { lacpInfoPortGeneralTableEntry 13 }

lacpInfoPortNtt OBJECT-TYPE
    SYNTAX  INTEGER {
        true(1),
        false(2)
        }
    MAX-ACCESS read-only
    STATUS  current
    DESCRIPTION
        "Need to transmit flag. True indicates that there is new protocol 
         information that should be transmitted on the link."
    ::= { lacpInfoPortGeneralTableEntry 14 }

lacpInfoPortSelected OBJECT-TYPE
    SYNTAX  INTEGER {
        selected(1),
        unselected(2),
        standby(3),
        suspended(4)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Selected flag value indicates that the selection logic has selected
         an appropriate Aggregator. A value of unselected indicates that no 
         aggregator is currently selected. A value of standby indicates that
         although the selection logic has selected an appropriate Aggregator,
         aggregation restrictions currently prevent the port from being 
         enabled as part of the aggregation, and so the port is being held
         in standby condition. A value of suspended indicates that the port in 
         a LACP port-channel cannot be aggregated due to, for example, 
         incompatible LACP system/port attributes of the remote endpoints. " 
    ::= { lacpInfoPortGeneralTableEntry 15 }

lacpInfoPortMoved OBJECT-TYPE
    SYNTAX  INTEGER {
        true(1),
        false(2)
        }
    MAX-ACCESS read-only
    STATUS  current
    DESCRIPTION
        "Port Moved flag is set to true if the receive machine for a port 
         is in the port_disabled state, and the combination of partner oper
         system and partner oper port number in use by the port has been 
         used by received in an incoming LACPDU on a different port."
    ::= { lacpInfoPortGeneralTableEntry 16 }

lacpInfoCollDetState OBJECT-TYPE 
    SYNTAX  INTEGER {
        on(1),
        off(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "LACP port collision and detection state"
    ::= { lacpInfoPortGeneralTableEntry 17 }

lacpInfoPortRxState OBJECT-TYPE 
    SYNTAX  DisplayString 
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "LACP port RX machine state"
    ::= { lacpInfoPortGeneralTableEntry 18 }

lacpInfoPortMuxState OBJECT-TYPE 
    SYNTAX  DisplayString
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "LACP port Mux machine state"
    ::= { lacpInfoPortGeneralTableEntry 19 }

lacpInfoPortPerState OBJECT-TYPE 
    SYNTAX  DisplayString
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "LACP port periodic machine state"
    ::= { lacpInfoPortGeneralTableEntry 20 }

lacpInfoPortPerTraTimer OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Periodic Transmit Timer"
    ::= { lacpInfoPortGeneralTableEntry 21 }

lacpInfoPortCurWhileTimer OBJECT-TYPE
    SYNTAX Integer32 
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Current While Timer"
    ::= { lacpInfoPortGeneralTableEntry 22 }

lacpInfoPortOperState OBJECT-TYPE
    SYNTAX  INTEGER {
        disabled(1),
        up(2),
        down(3)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The current operational state of LACP on the port."
    ::= { lacpInfoPortGeneralTableEntry 23 }


lacpInfoPortAdminTable OBJECT-TYPE
    SYNTAX SEQUENCE OF LacpInfoPortAdminTableEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The table of LACP port admin information."
    ::= { lacpInfoPort 2 }

lacpInfoPortAdminTableEntry OBJECT-TYPE
    SYNTAX LacpInfoPortAdminTableEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Admin information about a LACP port."
    INDEX { lacpInfoPortAdminIndex }
    ::= { lacpInfoPortAdminTable 1 }

LacpInfoPortAdminTableEntry ::= SEQUENCE {
    lacpInfoPortAdminIndex		PortNumber,
    lacpInfoPortActAdPortState 		DisplayString,
    lacpInfoPortActAdActiv 		INTEGER,
    lacpInfoPortActAdSync 		INTEGER,
    lacpInfoPortActAdDef 		INTEGER,
    lacpInfoPortActAdTimeout 		INTEGER,
    lacpInfoPortActAdColl 		INTEGER,
    lacpInfoPortActAdExp 		INTEGER,
    lacpInfoPortActAdAggr 		INTEGER,
    lacpInfoPortActAdDist 		INTEGER
    }

lacpInfoPortAdminIndex OBJECT-TYPE
    SYNTAX PortNumber
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The port identifier."
    ::= { lacpInfoPortAdminTableEntry 1 }


lacpInfoPortActAdPortState OBJECT-TYPE
    SYNTAX  DisplayString
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The state of Actor Administrator Port. This is a octet mask
         with the following bits: Activity, Synchronization, Defaulted, 
         Timeout, Collecting, Expired, Aggregation and Distributing.
         If all of them are 0 then the state is showed as 0x0, else it is
         displayed a blank state which mean is not a NULL state"
    ::= { lacpInfoPortAdminTableEntry 7 }

lacpInfoPortActAdActiv OBJECT-TYPE
    SYNTAX  INTEGER {
        active(1),
        passive(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The state of Actor Administrator Port Activity"
    ::= { lacpInfoPortAdminTableEntry 8 }

lacpInfoPortActAdSync OBJECT-TYPE
    SYNTAX  INTEGER {
        true(1),
        false(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The state of Actor Administrator Port Synchronization"
    ::= { lacpInfoPortAdminTableEntry 9 }

lacpInfoPortActAdDef OBJECT-TYPE
    SYNTAX  INTEGER {
        true(1),
        false(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The state of Actor Administrator Port Defaulted"
    ::= { lacpInfoPortAdminTableEntry 10 }

lacpInfoPortActAdTimeout OBJECT-TYPE 
    SYNTAX  INTEGER {
        short(1),
        long(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The state of Actor Administrator Port Timeout"
    ::= { lacpInfoPortAdminTableEntry 11 }

lacpInfoPortActAdColl OBJECT-TYPE 
    SYNTAX  INTEGER {
        true(1),
        false(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The state of Actor Administrator Port Collecting"
    ::= { lacpInfoPortAdminTableEntry 12 }

lacpInfoPortActAdExp OBJECT-TYPE 
    SYNTAX  INTEGER {
        true(1),
        false(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The state of Actor Administrator Port Expired"
    ::= { lacpInfoPortAdminTableEntry 13 }

lacpInfoPortActAdAggr OBJECT-TYPE 
    SYNTAX  INTEGER {
        true(1),
        false(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The state of Actor Administrator Port Aggregation"
    ::= { lacpInfoPortAdminTableEntry 14 }

lacpInfoPortActAdDist OBJECT-TYPE 
    SYNTAX  INTEGER {
        true(1),
        false(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The state of Actor Administrator Port Distributing"
    ::= { lacpInfoPortAdminTableEntry 15 }



lacpInfoPortOperTable OBJECT-TYPE
    SYNTAX SEQUENCE OF LacpInfoPortOperTableEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The table of LACP port oper information."
    ::= { lacpInfoPort 3 }

lacpInfoPortOperTableEntry OBJECT-TYPE
    SYNTAX LacpInfoPortOperTableEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Oper information about a LACP port."
    INDEX { lacpInfoPortOperIndex }
    ::= { lacpInfoPortOperTable 1 }

LacpInfoPortOperTableEntry ::= SEQUENCE {
    lacpInfoPortOperIndex		PortNumber,
    lacpInfoPortPartOpSysPrio 		Integer32,
    lacpInfoPortPartOpSysId 		DisplayString,
    lacpInfoPortPartOpKey 		Integer32,
    lacpInfoPortPartOpPortNum 		Integer32,
    lacpInfoPortPartOpPortPrio 		Integer32,
    lacpInfoPortActOpPortState 		DisplayString,
    lacpInfoPortActOpActiv 		INTEGER,
    lacpInfoPortActOpSync 		INTEGER,
    lacpInfoPortActOpDef 		INTEGER,
    lacpInfoPortActOpTimeout 		INTEGER,
    lacpInfoPortActOpColl 		INTEGER,
    lacpInfoPortActOpExp 		INTEGER,
    lacpInfoPortActOpAggr 		INTEGER,
    lacpInfoPortActOpDist 		INTEGER,
    lacpInfoPortPartOpPortState 	DisplayString,
    lacpInfoPortPartOpActiv 		INTEGER,
    lacpInfoPortPartOpSync 		INTEGER,
    lacpInfoPortPartOpDef 		INTEGER,
    lacpInfoPortPartOpTimeout 		INTEGER,
    lacpInfoPortPartOpColl 		INTEGER,
    lacpInfoPortPartOpExp 		INTEGER,
    lacpInfoPortPartOpAggr 		INTEGER,
    lacpInfoPortPartOpDist 		INTEGER 
    }

lacpInfoPortOperIndex OBJECT-TYPE
    SYNTAX PortNumber
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The port identifier."
    ::= { lacpInfoPortOperTableEntry 1 }

lacpInfoPortPartOpSysPrio OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The value of Partner Operator Port System Priority"
    ::= { lacpInfoPortOperTableEntry 2 }

lacpInfoPortPartOpSysId OBJECT-TYPE
    SYNTAX  DisplayString
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The value of Partner Operator Port System ID"
    ::= { lacpInfoPortOperTableEntry 3 }

lacpInfoPortPartOpKey OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The value of Partner Operator Port Key"
    ::= { lacpInfoPortOperTableEntry 4 }

lacpInfoPortPartOpPortNum OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The Partner Operator Port Number"
    ::= { lacpInfoPortOperTableEntry 5 }

lacpInfoPortPartOpPortPrio OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The value of Partner Operator Port Priority"
    ::= { lacpInfoPortOperTableEntry 6 }

lacpInfoPortActOpPortState OBJECT-TYPE
    SYNTAX  DisplayString
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The state of Actor Operator Port. This is a octet mask
         with the following bits: Activity, Synchronization, Defaulted, 
         Timeout, Collecting, Expired, Aggregation and Distributing.
         If all of them are 0 then the state is showed as 0x0, else it is
         displayed a blank state which mean is not a NULL state"
    ::= { lacpInfoPortOperTableEntry 7 }

lacpInfoPortActOpActiv OBJECT-TYPE
    SYNTAX  INTEGER {
        active(1),
        passive(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The state of Actor Operator Port Activity"
    ::= { lacpInfoPortOperTableEntry 8 }

lacpInfoPortActOpSync OBJECT-TYPE
    SYNTAX  INTEGER {
        true(1),
        false(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The state of Actor Operator Port Synchronization"
    ::= { lacpInfoPortOperTableEntry 9 }

lacpInfoPortActOpDef OBJECT-TYPE
    SYNTAX  INTEGER {
        true(1),
        false(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The state of Actor Operator Port Defaulted"
    ::= { lacpInfoPortOperTableEntry 10 }

lacpInfoPortActOpTimeout OBJECT-TYPE 
    SYNTAX  INTEGER {
        short(1),
        long(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The state of Actor Operator Port Timeout"
    ::= { lacpInfoPortOperTableEntry 11 }

lacpInfoPortActOpColl OBJECT-TYPE 
    SYNTAX  INTEGER {
        true(1),
        false(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The state of Actor Operator Port Collecting"
    ::= { lacpInfoPortOperTableEntry 12 }

lacpInfoPortActOpExp OBJECT-TYPE 
    SYNTAX  INTEGER {
        true(1),
        false(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The state of Actor Operator Port Expired"
    ::= { lacpInfoPortOperTableEntry 13 }

lacpInfoPortActOpAggr OBJECT-TYPE 
    SYNTAX  INTEGER {
        true(1),
        false(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The state of Actor Operator Port Aggregation"
    ::= { lacpInfoPortOperTableEntry 14 }

lacpInfoPortActOpDist OBJECT-TYPE 
    SYNTAX  INTEGER {
        true(1),
        false(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The state of Actor Operator Port Distributing"
    ::= { lacpInfoPortOperTableEntry 15 }

lacpInfoPortPartOpPortState OBJECT-TYPE
    SYNTAX  DisplayString
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The state of Partner Operator Port. This is a octet mask
         with the following bits: Activity, Synchronization, Defaulted, 
         Timeout, Collecting, Expired, Aggregation and Distributing.
         If all of them are 0 then the state is showed as 0x0, else it is
         displayed a blank state which mean is not a NULL state"
    ::= { lacpInfoPortOperTableEntry 16 }

lacpInfoPortPartOpActiv OBJECT-TYPE
    SYNTAX  INTEGER {
        active(1),
        passive(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The state of Partner Operator Port Activity"
    ::= { lacpInfoPortOperTableEntry 17 }

lacpInfoPortPartOpSync OBJECT-TYPE
    SYNTAX  INTEGER {
        true(1),
        false(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The state of Partner Operator Port Synchronization"
    ::= { lacpInfoPortOperTableEntry 18 }

lacpInfoPortPartOpDef OBJECT-TYPE
    SYNTAX  INTEGER {
        true(1),
        false(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The state of Partner Operator Port Defaulted"
    ::= { lacpInfoPortOperTableEntry 19 }

lacpInfoPortPartOpTimeout OBJECT-TYPE 
    SYNTAX  INTEGER {
        short(1),
        long(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The state of Partner Operator Port Timeout"
    ::= { lacpInfoPortOperTableEntry 20 }

lacpInfoPortPartOpColl OBJECT-TYPE 
    SYNTAX  INTEGER {
        true(1),
        false(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The state of Partner Operator Port Collecting"
    ::= { lacpInfoPortOperTableEntry 21 }

lacpInfoPortPartOpExp OBJECT-TYPE 
    SYNTAX  INTEGER {
        true(1),
        false(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The state of Partner Operator Port Expired"
    ::= { lacpInfoPortOperTableEntry 22 }

lacpInfoPortPartOpAggr OBJECT-TYPE 
    SYNTAX  INTEGER {
        true(1),
        false(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The state of Partner Operator Port Aggregation"
    ::= { lacpInfoPortOperTableEntry 23 }

lacpInfoPortPartOpDist OBJECT-TYPE 
    SYNTAX  INTEGER {
        true(1),
        false(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The state of Partner Operator Port Distributing"
    ::= { lacpInfoPortOperTableEntry 24 }


-- CIST Information

cistRoot OBJECT-TYPE
    SYNTAX  BridgeId
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The bridge identifier of the Root of the common spanning
         tree as determined by the Spanning Tree Protocol
         as executed by this node.  This value is used as
         the CIST Root Identifier parameter in all Configuration
         Bridge PDUs originated by this node."
    ::= { cistGeneralInfo 1 } 

cistRootPathCost OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The cost of the path to the CIST Root as seen from this bridge."
    ::= { cistGeneralInfo 2 } 

cistRootPort OBJECT-TYPE
    SYNTAX  PortNumber
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION 
        "The Port Number of the Port which offers the lowest path cost from 
        this bridge to the CIST Root Bridge."
    ::= { cistGeneralInfo 3 } 

cistBridgeHelloTime OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The amount of time between the transmission of Configuration bridge
         PDUs in seconds."
    ::= { cistGeneralInfo 4 } 

cistBridgeMaxAge OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The value in seconds that all bridges use for MaxAge when this bridge
         is acting as the root."
    ::= { cistGeneralInfo 5 } 

cistBridgeForwardDelay OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The value in seconds that all bridges use for ForwardDelay when this 
         bridge is acting as the root."
    ::= { cistGeneralInfo 6 } 

cistRegionalRoot OBJECT-TYPE
    SYNTAX  BridgeId
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The bridge identifier of the Root of the Multiple
         spanning tree region as determined by the Spanning Tree
         Protocol as executed by this node.  This value is used as
         the CIST Regional Root Identifier parameter in all Configuration
         Bridge PDUs originated by this node."
   ::= { cistGeneralInfo 7 } 

cistRegionalPathCost OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The Cost of the path to the CIST Regional Root as seen from this 
         bridge."
   ::= { cistGeneralInfo 8 } 

mstpDigest OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..63))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The digest of the mstp."
    ::= { cistGeneralInfo 9 }


-- CIST Port Information Table
cistInfoPortTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CistInfoPortTableEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The table of CIST Port information."
    ::= { cistInfo 2 }

cistInfoPortTableEntry OBJECT-TYPE
    SYNTAX CistInfoPortTableEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Information about a particular CIST Port."
    INDEX { cistInfoPortIndex }
    ::= { cistInfoPortTable 1 }

CistInfoPortTableEntry ::= SEQUENCE {
    cistInfoPortIndex            PortNumber,
    cistInfoPortPriority         Integer32,
    cistInfoPortPathCost         Integer32,
    cistInfoPortState            INTEGER,
    cistInfoPortRole             INTEGER,
    cistInfoPortDesignatedBridge BridgeId,
    cistInfoPortDesignatedPort   OCTET STRING,
    cistInfoPortLinkType         INTEGER,
    cistInfoPortHelloTime        Integer32,
    cistInfoPortEdge              INTEGER
    }

cistInfoPortIndex OBJECT-TYPE
    SYNTAX PortNumber
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The port number of the port for which this entry contains spanning
         tree configuration."
    ::= { cistInfoPortTableEntry 1 }

cistInfoPortPriority OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The four most significant bits of the Port Identifier of the 
         Spanning Tree instance can be modified by setting this value."
    ::= { cistInfoPortTableEntry 2 }

cistInfoPortPathCost OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The contribution of this port to the path cost of paths towards 
         the CIST Root which include this port."
    ::= { cistInfoPortTableEntry 3 }

cistInfoPortState OBJECT-TYPE
    SYNTAX INTEGER {
        disabled (1),
        discarding (2),
        learning (4),
        forwarding (5)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Current state of the Port as defined by the Common    
         spanning tree protocol." 
    ::= { cistInfoPortTableEntry 4 }

cistInfoPortRole OBJECT-TYPE
    SYNTAX INTEGER {
        disabled(1),
        alternate(2),
        backup(3),
        root(4),
        designated(5),
        master(6),
        unknown(7)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
          "Selected Port Role of the port for this spanning tree instance."
    ::= { cistInfoPortTableEntry 5 }

cistInfoPortDesignatedBridge OBJECT-TYPE
    SYNTAX  BridgeId
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The unique Bridge Identifier of the bridge which this port  
         considers to be the Designated Bridge for the port's segment."   
    ::= { cistInfoPortTableEntry 6 }

cistInfoPortDesignatedPort OBJECT-TYPE
    SYNTAX  OCTET STRING (SIZE (2))
    MAX-ACCESS  read-only
    STATUS  current
      DESCRIPTION
          "The Port identifier of the port on the Designated Bridge    
           for this port's segment."                                           
    ::= { cistInfoPortTableEntry 7 }

cistInfoPortLinkType OBJECT-TYPE
    SYNTAX INTEGER {
        p2p(1),
        shared(2),
        unknown(3)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The point-to-point status of the LAN segment attached 
         to this port.  A value of p2p (2) indicates that this port is being
         treated as if it is connected to a point-to-point link. 
         A value of shared(3) indicates that this port is being treated as 
         having a shared media connection."
    ::= { cistInfoPortTableEntry 8 }

cistInfoPortHelloTime OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "CIST port Hello Time"
    ::= { cistInfoPortTableEntry 9 }

cistInfoPortEdge OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The port is an edge port or not. Returns disabled(2) when the port is
         not an edge port and returns enabled(1) when it is an edge port."
    ::= { cistInfoPortTableEntry 10 }



-- General Information



-- VLAN information
vlanInfoTable OBJECT-TYPE
    SYNTAX SEQUENCE OF VlanInfoTableEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The table of VLAN information."
    ::= { vlanInfo 1 }

vlanInfoTableEntry OBJECT-TYPE
    SYNTAX VlanInfoTableEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Information about a particular VLAN."
    INDEX { vlanInfoId }
    ::= { vlanInfoTable 1 }

VlanInfoTableEntry ::= SEQUENCE {
    vlanInfoId                INTEGER,
    vlanInfoName 	      DisplayString,
    vlanInfoStatus            INTEGER,
    vlanInfoPorts             OCTET STRING
    }

vlanInfoId OBJECT-TYPE
    SYNTAX  INTEGER  (1..4090)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The VLAN identifier."
    ::= { vlanInfoTableEntry 1 }

vlanInfoName OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..32))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The VLAN name."
    ::= { vlanInfoTableEntry 2 }

vlanInfoStatus OBJECT-TYPE
    SYNTAX  INTEGER  {
	enabled(2),
	disabled(3)
	}
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable, VLAN state information"
    ::= { vlanInfoTableEntry 3 }




vlanInfoPorts OBJECT-TYPE
    SYNTAX  OCTET STRING
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The port list information in the VLAN. The ports are presented 
         in bitmap format.
	 in receiving order:

	     OCTET 1  OCTET 2  .....
             xxxxxxxx xxxxxxxx ..... 
             ||    || |_ port 8
             ||    ||  
             ||    ||___ port 7
             ||    |____ port 6
             ||      .    .   .
             ||_________ port 1
             |__________ reserved

         where x : 1 - The represented port belongs to the VLAN
		   0 - The represented port does not belong to the VLAN"
    ::= { vlanInfoTableEntry 7 }

-- L2 Operational commands




-- ----------------------------------------------------------------------------
--                                                                           --
--                    Virtual Link Aggregation (VLAG)                        --
--                                                                           --
-- ----------------------------------------------------------------------------

-- ----------------------------------------------------------------------------
-- Global VLAG Configuration
-- ----------------------------------------------------------------------------
vlagCurIslCfgPortChannel         OBJECT-TYPE
    SYNTAX      INTEGER (0..65535)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
                "Current vLAG ISL portchannel"
    DEFVAL      { 0 }
    ::= { vlagIslCfg 1 }

vlagNewIslCfgPortChannel         OBJECT-TYPE
    SYNTAX      INTEGER (0..65535)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "This object is used to change the vLAG ISL portchannel."
    DEFVAL      { 0 }
    ::= { vlagIslCfg 2 }

vlagCurIslCfgAdminKey         OBJECT-TYPE
    SYNTAX      INTEGER (0..65535)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
                "Current vLAG ISL admin key."
    DEFVAL      { 0 }
    ::= { vlagIslCfg 3 }

vlagNewIslCfgAdminKey         OBJECT-TYPE
    SYNTAX      INTEGER (0..65535)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "This object is used to change the vLAG ISL admin key."
    DEFVAL      { 0 }
    ::= { vlagIslCfg 4 }

vlagCurCfgSwitchPriority         OBJECT-TYPE
    SYNTAX      INTEGER (0..65535)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
                "Current vLAG switch priority"
    DEFVAL      { 0 }
    ::= { vlagCfg 4 }

vlagNewCfgSwitchPriority         OBJECT-TYPE
    SYNTAX      INTEGER (0..65535)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "This object is used to change the vLAG priority of this switch."
    DEFVAL      { 0 }
    ::= { vlagCfg 5 }

-- Static Trunk table
vlagCurCfgTrunkTable             OBJECT-TYPE
    SYNTAX      SEQUENCE OF VlagCurCfgTrunkTableEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
                "A table of objects of the vLAG groups configured in this
                 switch."
    ::= { vlagCfg 6 }

vlagCurCfgTrunkTableEntry        OBJECT-TYPE
    SYNTAX      VlagCurCfgTrunkTableEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
                "The configuration objects for an vLAG group."
    INDEX       { vlagCurCfgTrunkIndex }
    ::= { vlagCurCfgTrunkTable 1 }

VlagCurCfgTrunkTableEntry ::=    SEQUENCE {
    vlagCurCfgTrunkIndex              Integer32,
    vlagCurCfgTrunkState              INTEGER
    }

vlagCurCfgTrunkIndex             OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
                "The identifier of the trunk group."
    ::= { vlagCurCfgTrunkTableEntry 1 }

vlagCurCfgTrunkState             OBJECT-TYPE
    SYNTAX      INTEGER {
                    enabled(1),
                    disabled(2)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "The current administrative state of the vLAG group."
    DEFVAL      { disabled }
    ::= { vlagCurCfgTrunkTableEntry 2 }

vlagNewCfgTrunkTable             OBJECT-TYPE
    SYNTAX      SEQUENCE OF VlagNewCfgTrunkTableEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
                "A table of objects of the vLAG groups configured in this
                 switch."
    ::= { vlagCfg 7 }

vlagNewCfgTrunkTableEntry        OBJECT-TYPE
    SYNTAX      VlagNewCfgTrunkTableEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
                "The configuration objects for an vLAG group."
    INDEX       { vlagNewCfgTrunkIndex }
    ::= { vlagNewCfgTrunkTable 1 }

VlagNewCfgTrunkTableEntry ::=    SEQUENCE {
    vlagNewCfgTrunkIndex              Integer32,
    vlagNewCfgTrunkState              INTEGER
    }

vlagNewCfgTrunkIndex             OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "The identifier of the trunk group."
    ::= { vlagNewCfgTrunkTableEntry 1 }

vlagNewCfgTrunkState             OBJECT-TYPE
    SYNTAX      INTEGER {
                    enabled(1),
                    disabled(2)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "The current administrative state of the vLAG group."
    DEFVAL      { disabled }
    ::= { vlagNewCfgTrunkTableEntry 2 }


-- Dynamic Trunk table
vlagCurCfgLacpTable             OBJECT-TYPE
    SYNTAX      SEQUENCE OF VlagCurCfgLacpTableEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
                "A table of objects of the vLAG groups configured in this
                 switch."
    ::= { vlagCfg 8 }

vlagCurCfgLacpTableEntry        OBJECT-TYPE
    SYNTAX      VlagCurCfgLacpTableEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
                "The configuration objects for an vLAG group."
    INDEX       { vlagCurCfgLacpKey }
    ::= { vlagCurCfgLacpTable 1 }

VlagCurCfgLacpTableEntry ::=    SEQUENCE {
    vlagCurCfgLacpKey                INTEGER,
    vlagCurCfgLacpState              INTEGER
    }

vlagCurCfgLacpKey             OBJECT-TYPE
    SYNTAX      INTEGER (1..65535)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
                "The identifier of the trunk group."
    ::= { vlagCurCfgLacpTableEntry 1 }

vlagCurCfgLacpState             OBJECT-TYPE
    SYNTAX      INTEGER {
                    enabled(1),
                    disabled(2)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "The current administrative state of the vLAG group."
    DEFVAL      { disabled }
    ::= { vlagCurCfgLacpTableEntry 2 }

vlagNewCfgLacpTable             OBJECT-TYPE
    SYNTAX      SEQUENCE OF VlagNewCfgLacpTableEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
                "A table of objects of the vLAG groups configured in this
                 switch."
    ::= { vlagCfg 9 }

vlagNewCfgLacpTableEntry        OBJECT-TYPE
    SYNTAX      VlagNewCfgLacpTableEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
                "The configuration objects for an vLAG group."
    INDEX       { vlagNewCfgLacpKey }
    ::= { vlagNewCfgLacpTable 1 }

VlagNewCfgLacpTableEntry ::=    SEQUENCE {
    vlagNewCfgLacpKey                INTEGER,
    vlagNewCfgLacpState              INTEGER
    }

vlagNewCfgLacpKey             OBJECT-TYPE
    SYNTAX      INTEGER (1..65535)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
                "The identifier of the trunk group."
    ::= { vlagNewCfgLacpTableEntry 1 }

vlagNewCfgLacpState             OBJECT-TYPE
    SYNTAX      INTEGER {
                    enabled(1),
                    disabled(2)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "The current administrative state of the vLAG group."
    DEFVAL      { disabled }
    ::= { vlagNewCfgLacpTableEntry 2 }

vlagCurCfgHlthchkPeerIp            OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
                "The current Health check Peer ip address."
    DEFVAL { '00000000'h }    -- 0.0.0.0
    ::= { vlagCfg 10 }

vlagNewCfgHlthchkPeerIp            OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "The New Health check Peer ip address."
    DEFVAL { '00000000'h }    -- 0.0.0.0
    ::= { vlagCfg 11 }

vlagCurCfgTierId                    OBJECT-TYPE
    SYNTAX      INTEGER (0..512)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
                "Current vLAG Tier ID"
    DEFVAL      { 0 }
    ::= { vlagCfg 12 }

vlagNewCfgTierId                    OBJECT-TYPE
    SYNTAX      INTEGER (0..512)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "This object is used to change the vLAG Tier ID of this switch.
                vLAG consist of 2 vLAG peer switches connected by ISL link, the
                system formed by the switches is referred to as a vLAG tier.
                This object is used to specify the vLAG tier. And the tier id 
                is used to generate vLAG system MAC."
    DEFVAL      { 0 }
    ::= { vlagCfg 13 }

vlagCurCfgStartupDelayInterval            OBJECT-TYPE
    SYNTAX      INTEGER (0..3600)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
                "Current vLAG Startup delay interval"
    DEFVAL      { 120 }
    ::= { vlagCfg 14 }

vlagNewCfgStartupDelayInterval            OBJECT-TYPE
    SYNTAX      INTEGER (0..3600)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "This object is used to change the vLAG startup Delay Timer
                interval. The Timer is used to prevent traffic lost for the
                vLAG ports may be up before the ISL is up. The Timer is st-
                arted when the ISL is up and the role has been elected. And
                when the timer expires, all vLAG ports will be up. Before 
                and during the timer running, all vLAG ports should be err-
                disabled."
    DEFVAL      { 120 }
    ::= { vlagCfg 15 }

vlagCurCfgGlobalEnable             OBJECT-TYPE
    SYNTAX      INTEGER {
                    enabled(1),
                    disabled(2)
                } 
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
                "Current vLAG global status on switch."
    DEFVAL      { disabled }
    ::= { vlagCfg 16 }

vlagNewCfgGlobalEnable             OBJECT-TYPE
    SYNTAX      INTEGER {
                    enabled(1),
                    disabled(2)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "Set true to enable vLAG globally or
                 Set false to disable vLAG globally on switch."
    DEFVAL      { disabled }
    ::= { vlagCfg 17 }

vlagCurCfgHlthchkConnectRetryInterval    OBJECT-TYPE
    SYNTAX      INTEGER (1..300)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
                "In case of healtcheck TCP connection can not be 
                 established, interval at which the retry attempt 
                 will be made to connect to the peer."
    DEFVAL      { 30 }
    ::= { vlagCfg 18 }

vlagNewCfgHlthchkConnectRetryInterval    OBJECT-TYPE
    SYNTAX      INTEGER (1..300)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "In case of healtcheck TCP connection can not be 
                 established, interval at which the retry attempt 
                 will be made to connect to the peer."
    DEFVAL      { 30 }
    ::= { vlagCfg 19 }

vlagCurCfgHlthchkKeepaliveAttempts       OBJECT-TYPE
    SYNTAX      INTEGER (1..24)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
                "Number of keepalive attempts made before declaring 
                 peer is down. Within this time, atleast one of the 
                 keepalive message should have been received from the peer."
    DEFVAL      { 3 }
    ::= { vlagCfg 20 }

vlagNewCfgHlthchkKeepaliveAttempts           OBJECT-TYPE
    SYNTAX      INTEGER (1..24)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "Number of keepalive attempts made before declaring 
                 peer is down.Within this time, atleast one of the 
                 keepalive message should have been received from the peer."
    DEFVAL      { 3 }
    ::= { vlagCfg 21 }

vlagCurCfgHlthchkKeepaliveInterval     OBJECT-TYPE
    SYNTAX      INTEGER (2..300)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
                "Interval between keepalives sent over healthcheck 
                 TCP session to keep the session alive."
    DEFVAL      { 5 }
    ::= { vlagCfg 22 }

vlagNewCfgHlthchkKeepaliveInterval     OBJECT-TYPE
    SYNTAX      INTEGER (2..300)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "Interval between keepalives sent over healthcheck 
                 TCP session to keep the session alive."
    DEFVAL      { 5 }
    ::= { vlagCfg 23 }

vlagCurCfgAutoRecoveryInterval            OBJECT-TYPE
    SYNTAX      INTEGER (240..3600)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
                "Current vLAG Auto Recovery interval"
    DEFVAL      { 300 }
    ::= { vlagCfg 24 }

vlagNewCfgAutoRecoveryInterval            OBJECT-TYPE
    SYNTAX      INTEGER (240..3600)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "This object is used to change the vLAG Auto Recovery Timer
                interval. The Timer is used to prevent all vlag ports stay 
                in ErrDisabled state when booting two vLAG switches but one
                can not be up."
    DEFVAL      { 300 }
    ::= { vlagCfg 25 }


-- ----------------------------------------------------------------------------
-- Global VLAG Info
-- ----------------------------------------------------------------------------
vlagInfoState             OBJECT-TYPE
    SYNTAX      INTEGER  {
                    true(1),
                    false(2)
                   }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "The current running state of vLAG."
    ::= { vlagInfoSystem 1 }

vlagInfoAdminRole    OBJECT-TYPE
    SYNTAX INTEGER  {
                    unelected(0),
                    primary(1),
                    secondary(2)
                   }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The current running role of the switch. 
        Role can be Primary(1), secondary(2) and unelected(3).
        Primary role indicates that the this switch controls the centralized
        operation in a vLAG domain. Secondary role indicates that this 
        switch can take up the primary role when primary is not available.
        Unelected indicates that switches are not detected by one another"
    ::= {vlagInfoSystem 2 }

vlagInfoISLId    OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "vLAG ISL trunk id."
    ::= {vlagInfoSystem 3 }

vlagInfoLocalMac    OBJECT-TYPE
    SYNTAX PhysAddress
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Local vLAG MAC address."
    ::= {vlagInfoSystem 4 }

vlagInfoLocalPriority    OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Local vLAG Priority."
    ::= {vlagInfoSystem 5 }

vlagInfoRemoteMac    OBJECT-TYPE
    SYNTAX PhysAddress
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Local vLAG MAC address."
    ::= {vlagInfoSystem 6 }

vlagInfoRemotePriority    OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Local vLAG Priority."
    ::= {vlagInfoSystem 7 }

vlagInfoHlthchkStatus    OBJECT-TYPE
    SYNTAX      INTEGER  {
                    true(1),
                    false(2)
                   }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "The current health check running status."
    ::= { vlagInfoSystem 8 }

vlagInfoStartupDelayInterval    OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Startup Delay Timer Interval. The value may be 
        different from vlagCurCfgStartupDelayInterval for
        the configuration of the interval after the timer
        is started can only take effect next startup."
    ::= {vlagInfoSystem 9 }

vlagInfoStartupDelayStatus    OBJECT-TYPE
    SYNTAX INTEGER {
        unstarted(1),
        running(2),
        finished(3)
    }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Startup Delay Timer Status."
    ::= {vlagInfoSystem 10 }

vlagInfoSystemMac   OBJECT-TYPE
    SYNTAX PhysAddress
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "System vLAG MAC address"
    ::= {vlagInfoSystem 11 }

vlagInfoOperaRole    OBJECT-TYPE
    SYNTAX INTEGER  {
                    unelected(0),
                    primary(1),
                    secondary(2)
                   }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "vLAG switch operational role."
    ::= {vlagInfoSystem 12 }

vlagInfoAutoRecoveryInterval    OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Auto Recovery Timer Interval. The value may be 
        different from vlagCurCfgAutoRecoveryInterval for
        the configuration of the interval after the timer
        is started can only take effect next startup."
    ::= {vlagInfoSystem 13 }

vlagInfoAutoRecoveryStatus    OBJECT-TYPE
    SYNTAX INTEGER {
        unstarted(1),
        running(2),
        finished(3)
    }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Auto Recovery Timer Status."
    ::= {vlagInfoSystem 14 }

vlagInfoInstanceTable             OBJECT-TYPE
    SYNTAX      SEQUENCE OF VlagInfoInstanceEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
                "A table of objects of the running vLAG instances." 
    ::= { vlagInfoGroup 1 }

vlagInfoInstanceEntry        OBJECT-TYPE
    SYNTAX      VlagInfoInstanceEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
                "The configuration objects for an vLAG group."
    INDEX       { vlagInstanceId }
    ::= { vlagInfoInstanceTable 1 }

VlagInfoInstanceEntry ::=    SEQUENCE {
    vlagInstanceId                   Integer32,
    vlagInstanceTrunkId              Integer32,
    vlagInstanceAdminKey             Integer32,
    vlagInstanceState                INTEGER
    }

vlagInstanceId             OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
                "The identifier of this instance."
    ::= { vlagInfoInstanceEntry 1 }

vlagInstanceTrunkId             OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
                "The trunk id of this vLAG instance."
    ::= { vlagInfoInstanceEntry 2 }

vlagInstanceAdminKey            OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
                "AdminKey of this vLAG instance. Applicable only incase of
    dynamic trunks."
    ::= { vlagInfoInstanceEntry 3 }

vlagInstanceState             OBJECT-TYPE
    SYNTAX      INTEGER {
                    down(1),
                    localUp(2),
                    remoteUp(3),
                    formed(4)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "The current running state of the vLAG instance."
    DEFVAL      { down }
    ::= { vlagInfoInstanceEntry 4 }

vlagInfoIslId     OBJECT-TYPE
    SYNTAX        Integer32
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION   "vLAG ISL Id"
    ::= {vlagInfoIslGroup 1 }

vlagInfoIslProtocol  OBJECT-TYPE
    SYNTAX        INTEGER  {
                     static(1),
                     lacp(2)
                  }
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION   "vLAG ISL trunk group state
         Static - static trunk group
         Lacp - dynamic trunk group"
    ::= {vlagInfoIslGroup 3 }

vlagInfoIslPortchannel    OBJECT-TYPE
    SYNTAX        Integer32
    MAX-ACCESS    read-only
    STATUS        current 
    DESCRIPTION   "vLAG ISL portchannel number" 
    ::= {vlagInfoIslGroup 4 }

vlagInfoIslAdminkey    OBJECT-TYPE
    SYNTAX        Integer32
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION   "vLAG ISL lacp admin key"
    ::= {vlagInfoIslGroup 5 }

vlagInfoIslPorts    OBJECT-TYPE
    SYNTAX        OCTET STRING
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION   "Local vLAG MAC address."
    ::= {vlagInfoIslGroup 6 }

vlagInfoIslPortState    OBJECT-TYPE
    SYNTAX        OCTET STRING
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION   "Local vLAG MAC address."
    ::= {vlagInfoIslGroup 7 }


-- ----------------------------------------------------------------------------
-- Global VLAG Statistics
-- ----------------------------------------------------------------------------
-- vlagStatsSystem   OBJECT IDENTIFIER ::= { vlagStats 1 }
-- vlagStatsIsl      OBJECT IDENTIFIER ::= { vlagStats 2 }
-- vlagStatsHealth   OBJECT IDENTIFIER ::= { vlagStats 3 }
-- vlagStatsLacp     OBJECT IDENTIFIER ::= { vlagStats 4 }
-- vlagStatsPdu      OBJECT IDENTIFIER ::= { vlagStats 5 }
-- vlagStatsIgmp     OBJECT IDENTIFIER ::= { vlagStats 6 }

vlagStatsClear                           OBJECT-TYPE
    SYNTAX      INTEGER {
                    clear(1),
                    other(2)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "Setting this object to 'clear' will reset all statistics
                 objects of VLAG. A get action of this object will always
                 return 'other'. Setting this object to 'other' is not
                 allowed."
    ::= { vlagStatsSystem 1 }

vlagStatsIslInOctets OBJECT-TYPE
      SYNTAX  Counter32
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
              "The total number of vlag ISL octets received."
      ::= { vlagStatsIsl 1 }

vlagStatsIslInPackets OBJECT-TYPE
      SYNTAX  Counter32
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
              "The total number of vlag ISL packets received."
      ::= { vlagStatsIsl 2 }

vlagStatsIslOutOctets OBJECT-TYPE
      SYNTAX  Counter32
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
              "The total number of vlag ISL octets sent."
      ::= { vlagStatsIsl 3 }

vlagStatsIslOutPackets OBJECT-TYPE
      SYNTAX  Counter32
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
              "The total number of vlag ISL packets sent."
      ::= { vlagStatsIsl 4 }

vlagStatsPduSentRoleElection OBJECT-TYPE
      SYNTAX  Counter32
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
              "The total number of vlag PDUs sent for role elections"
      ::= { vlagStatsPdu 1 }

vlagStatsPduSentSystemInfo OBJECT-TYPE
      SYNTAX  Counter32
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
              "The total number of vlag PDUs sent for system info"
      ::= { vlagStatsPdu 2 }

vlagStatsPduSentFdbDynamicAdd OBJECT-TYPE
      SYNTAX  Counter32
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
              "The total number of vlag PDUs sent for addition of FDB dynamic entry"
      ::= { vlagStatsPdu 7 }

vlagStatsPduSentFdbDynamicDel OBJECT-TYPE
      SYNTAX  Counter32
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
              "The total number of vlag PDUs sent for deletion of FDB dynamic entry"
      ::= { vlagStatsPdu 8 }

vlagStatsPduSentFdbInactiveAdd OBJECT-TYPE
      SYNTAX  Counter32
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
              "The total number of vlag PDUs sent for addition of FDB inactive entry"
      ::= { vlagStatsPdu 9 }

vlagStatsPduSentFdbInactiveDel OBJECT-TYPE
      SYNTAX  Counter32
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
              "The total number of vlag PDUs sent for deletion of FDB inactive entry"
      ::= { vlagStatsPdu 10 }

vlagStatsPduSentHlthCheck OBJECT-TYPE
      SYNTAX  Counter32
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
              "The total number of vlag PDUs sent for Health check"
      ::= { vlagStatsPdu 13 }

vlagStatsPduSentOther OBJECT-TYPE
      SYNTAX  Counter32
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
              "The total number of vlag PDUs sent for others"
      ::= { vlagStatsPdu 15 }

vlagStatsPduSentUnknown OBJECT-TYPE
      SYNTAX  Counter32
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
              "The total number of vlag PDUs sent for unknowns"
      ::= { vlagStatsPdu 16 }

vlagStatsPduRcvRoleElection OBJECT-TYPE
      SYNTAX  Counter32
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
              "The total number of vlag PDUs received for role elections"
      ::= { vlagStatsPdu 17 }

vlagStatsPduRcvSystemInfo OBJECT-TYPE
      SYNTAX  Counter32
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
              "The total number of vlag PDUs received for system info"
      ::= { vlagStatsPdu 18 }

vlagStatsPduRcvFdbDynamicAdd OBJECT-TYPE
      SYNTAX  Counter32
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
              "The total number of vlag PDUs received for addition of FDB dynamic entry"
      ::= { vlagStatsPdu 23 }

vlagStatsPduRcvFdbDynamicDel OBJECT-TYPE
      SYNTAX  Counter32
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
              "The total number of vlag PDUs received for deletion of FDB dynamic entry"
      ::= { vlagStatsPdu 24 }

vlagStatsPduRcvFdbInactiveAdd OBJECT-TYPE
      SYNTAX  Counter32
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
              "The total number of vlag PDUs received for addition of FDB inactive entry"
      ::= { vlagStatsPdu 25 }

vlagStatsPduRcvFdbInactiveDel OBJECT-TYPE
      SYNTAX  Counter32
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
              "The total number of vlag PDUs received for deletion of FDB inactive entry"
      ::= { vlagStatsPdu 26 }

vlagStatsPduRcvHlthCheck OBJECT-TYPE
      SYNTAX  Counter32
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
              "The total number of vlag PDUs received for Health check"
      ::= { vlagStatsPdu 29 }

vlagStatsPduRcvOther OBJECT-TYPE
      SYNTAX  Counter32
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
              "The total number of vlag PDUs received for others"
      ::= { vlagStatsPdu 31 }

vlagStatsPduRcvUnknown OBJECT-TYPE
      SYNTAX  Counter32
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
              "The total number of vlag PDUs received for unknowns"
      ::= { vlagStatsPdu 32 }

vlagStatsPduSentPeerInstanceEnable OBJECT-TYPE
      SYNTAX  Counter32
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
              "The total number of vlag PDUs sent for peer instance enable"
      ::= { vlagStatsPdu 33 }

vlagStatsPduSentPeerInstanceDisable OBJECT-TYPE
      SYNTAX  Counter32
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
              "The total number of vlag PDUs sent for peer instance disable"
      ::= { vlagStatsPdu 34 }

vlagStatsPduSentISLHello OBJECT-TYPE
      SYNTAX  Counter32
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
              "The total number of vlag PDUs sent for ISL hello"
      ::= { vlagStatsPdu 35 }

vlagStatsPduRcvISLHello OBJECT-TYPE
      SYNTAX  Counter32
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
              "The total number of vlag PDUs received for ISL hello"
      ::= { vlagStatsPdu 36 }

vlagStatsPduRcvPeerInstanceEnable OBJECT-TYPE
      SYNTAX  Counter32
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
              "The total number of vlag PDUs received for peer instance enable"
      ::= { vlagStatsPdu 37 }

vlagStatsPduRcvPeerInstanceDisable OBJECT-TYPE
      SYNTAX  Counter32
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
              "The total number of vlag PDUs received for peer instance disable"
      ::= { vlagStatsPdu 38 }

vlagStatsIgmpReportsForwarded OBJECT-TYPE
      SYNTAX  Counter32
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
              "The total number of IGMP reports forwarded to the peer"
      ::= { vlagStatsIgmp 1 }

vlagStatsIgmpLeavesForwarded OBJECT-TYPE
      SYNTAX  Counter32
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
              "The total number of IGMP leaves forwarded to the peer"
      ::= { vlagStatsIgmp 2 }


-- ----------------------------------------------------------------------------
-- { INSERT:  ecp    
-- ----------------------------------------------------------------------------


-- ------------------------------------------------------------------------- --
-- ECP Configuration                                                         {
-- ------------------------------------------------------------------------- --
ecpCurCfgRetrans OBJECT-TYPE
    SYNTAX INTEGER
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The ECP retransmission interval in millisecond"
    ::= { ecpCfg 1 }

ecpNewCfgRetrans OBJECT-TYPE
    SYNTAX INTEGER (100..9000)
    MAX-ACCESS  read-write
    STATUS current
    DESCRIPTION
        "The ECP retransmission interval in millisecond"
    ::= { ecpCfg 2 }
-- ------------------------------------------------------------------------- --
-- ECP Configuration (end)                                                   }
-- ------------------------------------------------------------------------- --


-- ------------------------------------------------------------------------- --
-- ECP Information                                                           {
-- ------------------------------------------------------------------------- --
ecpChnlInfoTable OBJECT-TYPE
    SYNTAX SEQUENCE OF EcpChnlInfoEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The table of ECP channel Info."
    ::= { ecpInfo 1 }

ecpChnlInfoEntry OBJECT-TYPE
    SYNTAX EcpChnlInfoEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Information about ECP channel."
    INDEX { ecpChnlInfoEntryIndex }
    ::= { ecpChnlInfoTable 1 }

EcpChnlInfoEntry ::= SEQUENCE {
    ecpChnlInfoEntryIndex   Integer32
    ,ecpChnlPort            Integer32
    ,ecpChnlStag            Integer32           
    ,ecpChnlSndlen          Integer32
    ,ecpChnlSndnxt          Integer32
    ,ecpChnlRcvlast         Integer32
    ,ecpChnlStateMachine    Integer32
    ,ecpChnlRxCnt           Integer32
    ,ecpChnlTxCnt           Integer32
    ,ecpChnlRxDrop          Integer32
    ,ecpChnlTxDrop          Integer32
    ,ecpChnlState           INTEGER
    ,ecpChnlAckErr          Integer32
    }

ecpChnlInfoEntryIndex OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS read-only
    STATUS  current
    DESCRIPTION
        "The index of the ecp chnl info table."
    ::= { ecpChnlInfoEntry 1 }

ecpChnlPort OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS read-only
    STATUS  current
    DESCRIPTION
        "The ecp chanl port info."
    ::= { ecpChnlInfoEntry 2 }

ecpChnlStag OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS read-only
    STATUS  current
    DESCRIPTION
        "The ecp chanl stag info."
    ::= { ecpChnlInfoEntry 3 }

ecpChnlSndlen OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS read-only
    STATUS  current
    DESCRIPTION
        "The ecp chanl send length info."
    ::= { ecpChnlInfoEntry 4 }

ecpChnlSndnxt OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS read-only
    STATUS  current
    DESCRIPTION
        "The ecp chanl send next info."
    ::= { ecpChnlInfoEntry 5 }

ecpChnlRcvlast OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS read-only
    STATUS  current
    DESCRIPTION
        "The ecp chanl recv last sequence info."
    ::= { ecpChnlInfoEntry 6 }

ecpChnlStateMachine OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS read-only
    STATUS  current
    DESCRIPTION
        "The ecp chanl state machineinfo."
    ::= { ecpChnlInfoEntry 7 }

ecpChnlRxCnt OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS read-only
    STATUS  current
    DESCRIPTION
        "The ecp chanl Rx count info."
    ::= { ecpChnlInfoEntry 8 }

ecpChnlTxCnt OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS read-only
    STATUS  current
    DESCRIPTION
        "The ecp chanl Tx count info."
    ::= { ecpChnlInfoEntry 9 }

ecpChnlRxDrop OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS read-only
    STATUS  current
    DESCRIPTION
        "The ecp chanl RxDrop info."
    ::= { ecpChnlInfoEntry 10 }

ecpChnlTxDrop OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS read-only
    STATUS  current
    DESCRIPTION
        "The ecp chanl TxDrop info."
    ::= { ecpChnlInfoEntry 11 }

ecpChnlState OBJECT-TYPE
    SYNTAX INTEGER {
        enabled(1),
        disabled(0)
        }
    MAX-ACCESS read-only
    STATUS  current
    DESCRIPTION
        "The ecp chanl state info."
    ::= { ecpChnlInfoEntry 12 }

ecpChnlAckErr OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS read-only
    STATUS  current
    DESCRIPTION
        "The ecp chanl ACK error info."
    ::= { ecpChnlInfoEntry 13 }
-- ------------------------------------------------------------------------- --
-- ECP Information (end)                                                     }
-- ------------------------------------------------------------------------- --


-- ------------------------------------------------------------------------- --
-- ECP Operation                                                             {
-- ------------------------------------------------------------------------- --

-- ------------------------------------------------------------------------- --
-- ECP Operation (end)                                                       }
-- ------------------------------------------------------------------------- --


-- ----------------------------------------------------------------------------
-- } INSERT:  layer2
-- ----------------------------------------------------------------------------

layer3                  OBJECT IDENTIFIER ::= { g8124-mgmt 3 }
-- ----------------------------------------------------------------------------
-- { INSERT:  layer3
-- ----------------------------------------------------------------------------

layer3Configs     OBJECT IDENTIFIER ::= { layer3 1 }

layer3Stats       OBJECT IDENTIFIER ::= { layer3 2 }

layer3Info        OBJECT IDENTIFIER ::= { layer3 3 }


layer3Oper        OBJECT IDENTIFIER ::= { layer3 4 }

ipInterfaceCfg      OBJECT IDENTIFIER ::= { layer3Configs 1 }

ipInterfaceLoopbackCfg    OBJECT IDENTIFIER ::= { layer3Configs 24 }

ipGatewayCfg        OBJECT IDENTIFIER ::= { layer3Configs 2 }

ipStaticRouteCfg    OBJECT IDENTIFIER ::= { layer3Configs 3 }

ipForwardCfg        OBJECT IDENTIFIER ::= { layer3Configs 4 }
vrrpCfg         OBJECT IDENTIFIER ::= { layer3Configs 6 }
arpCfg          OBJECT IDENTIFIER ::= { layer3Configs 7 }
ipBootpCfg      OBJECT IDENTIFIER ::= { layer3Configs 8 }

dnsCfg          OBJECT IDENTIFIER ::= { layer3Configs 9 }

ipNwfCfg        OBJECT IDENTIFIER ::= { layer3Configs 10 }
ipRmapCfg       OBJECT IDENTIFIER ::= { layer3Configs 11 }
bgpCfg          OBJECT IDENTIFIER ::= { layer3Configs 12 }
ospfCfg         OBJECT IDENTIFIER ::= { layer3Configs 13 }
ipGeneralCfg        OBJECT IDENTIFIER ::= { layer3Configs 14 }
ipStaticArpCfg      OBJECT IDENTIFIER ::= { layer3Configs 15 }
rip2Cfg         OBJECT IDENTIFIER ::= { layer3Configs 18 }
igmpCfg             OBJECT IDENTIFIER ::= { layer3Configs 19 }

ipStaticNbrCfg      OBJECT IDENTIFIER ::= { layer3Configs 21 }
ipGatewayIpv6Cfg    OBJECT IDENTIFIER ::= { layer3Configs 22 }

ipStaticRoute6Cfg   OBJECT IDENTIFIER ::= { layer3Configs 23 }

ospf3Cfg              OBJECT IDENTIFIER ::= { layer3Configs 26 }

pptCfg      OBJECT IDENTIFIER ::= { layer3Configs 27 }

ipv6pmtuCfg          OBJECT IDENTIFIER ::= { layer3Configs 28 }

mldCfg             OBJECT IDENTIFIER ::= { layer3Configs 30 }

ndprefixCfg    OBJECT IDENTIFIER ::= { layer3Configs 31 }

dhcpsnpCfg  OBJECT IDENTIFIER ::= { layer3Configs 33 }
ipsecCfg       OBJECT IDENTIFIER ::= { layer3Configs 32 }

arpStats      OBJECT IDENTIFIER ::= { layer3Stats 2 }
routeStats        OBJECT IDENTIFIER ::= { layer3Stats 3 }
dnsStats      OBJECT IDENTIFIER ::= { layer3Stats 4 }
vrrpStats         OBJECT IDENTIFIER ::= { layer3Stats 5 }
ospfStats     OBJECT IDENTIFIER ::= { layer3Stats 6 }
clearStats    OBJECT IDENTIFIER ::= { layer3Stats 7 }
igmpStats         OBJECT IDENTIFIER ::= { layer3Stats 9 }
ipv6Stats          OBJECT IDENTIFIER ::= { layer3Stats 10}
rip2Stats     OBJECT IDENTIFIER ::= { layer3Stats 13 }
ipStats           OBJECT IDENTIFIER ::= { layer3Stats 16 }
icmpStats         OBJECT IDENTIFIER ::= { layer3Stats 17 }
tcpStats          OBJECT IDENTIFIER ::= { layer3Stats 18 }
udpStats          OBJECT IDENTIFIER ::= { layer3Stats 19 }
bootpStats        OBJECT IDENTIFIER ::= { layer3Stats 20 }
ospf3Stats        OBJECT IDENTIFIER ::= { layer3Stats 22 }

mldStats         OBJECT IDENTIFIER ::= { layer3Stats 23 }

ipsecStats     OBJECT IDENTIFIER ::= { layer3Stats 24 }


dhcpsnpStats     OBJECT IDENTIFIER ::= { layer3Stats 25}

ipRoutingInfo     OBJECT IDENTIFIER ::= { layer3Info 1 }
ipEcmpRoutingInfo     OBJECT IDENTIFIER ::= { layer3Info 19 }
ipEcmpHash            OBJECT IDENTIFIER ::= { layer3Info 20 }

ipv6PmtuInfo          OBJECT IDENTIFIER ::= { layer3Info 21}

arpInfo       OBJECT IDENTIFIER ::= { layer3Info 2 }

vrrpInfo      OBJECT IDENTIFIER ::= { layer3Info 3 }
ospfinfo      OBJECT IDENTIFIER ::= { layer3Info 4 }

gatewayInfo   OBJECT IDENTIFIER ::= { layer3Info 5 }

igmpInfo          OBJECT IDENTIFIER ::= { layer3Info 6 }

nbrInfo      OBJECT IDENTIFIER ::= { layer3Info 12 }
gatewayIPv6Info   OBJECT IDENTIFIER ::= { layer3Info 13 }
ipRoute6Info      OBJECT IDENTIFIER ::= { layer3Info 14 }


ipInfo            OBJECT IDENTIFIER ::= { layer3Info 8 }

ipIntfInfo        OBJECT IDENTIFIER ::= { layer3Info 9 }

ipIntfLoopbackInfo OBJECT IDENTIFIER ::= { layer3Info 16 }


rip2Info          OBJECT IDENTIFIER ::= { layer3Info 10 }
bgpInfo           OBJECT IDENTIFIER ::= { layer3Info 11 }

dhcpInfo   OBJECT IDENTIFIER ::= { layer3Info 15 }


ospf3Info         OBJECT IDENTIFIER ::= { layer3Info 18 }

mldInfo          OBJECT IDENTIFIER ::= { layer3Info 22 }

ipsecInfo      OBJECT IDENTIFIER ::= { layer3Info 23 }

dhcpsnpInfo      OBJECT IDENTIFIER ::= { layer3Info 24 }

-- ----------------------------------------------------------------------------
-- { INSERT:  DHCP Snooping Config
-- ----------------------------------------------------------------------------

dhcpSnoopingCurCfgOnState                  OBJECT-TYPE
    SYNTAX      INTEGER  {
                    on(1),
                    off(2)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "DHCP Snooping ON/OFF settings."
    ::= { dhcpsnpCfg 1 }
    
dhcpSnoopingNewCfgOnState                  OBJECT-TYPE
    SYNTAX      INTEGER  {
                    on(1),
                    off(2)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "DHCP Snooping ON/OFF setting."
    ::= { dhcpsnpCfg 2 }

dhcpSnoopingCurCfgOption82OnState           OBJECT-TYPE
    SYNTAX      INTEGER  {
                    on(1),
                    off(2)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "on/off state of DHCP Snooping option82."
    ::= { dhcpsnpCfg 3 }

dhcpSnoopingNewCfgOption82OnState          OBJECT-TYPE
    SYNTAX      INTEGER  {
                    on(1),
                    off(2)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Enable/Disable DHCP Snooping option82"
    ::= { dhcpsnpCfg 4 }    

dhcpSnoopingCurCfgPortTable             OBJECT-TYPE
    SYNTAX      SEQUENCE OF DHCPSnoopingCurCfgPortTableEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "DHCP Snooping Port Configuration Table."
    ::= { dhcpsnpCfg 5 }

dhcpSnoopingCurCfgPortTableEntry        OBJECT-TYPE
    SYNTAX      DHCPSnoopingCurCfgPortTableEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A row in DHCP Snooping Port Configuration Table"
    INDEX  { dhcpSnoopingCurCfgPortId }
    ::= { dhcpSnoopingCurCfgPortTable 1 }

DHCPSnoopingCurCfgPortTableEntry::= SEQUENCE {
    dhcpSnoopingCurCfgPortId                   Integer32,
    dhcpSnoopingCurCfgPortTrusted                 INTEGER,
    dhcpSnoopingCurCfgPortRateLimit            Integer32
}

dhcpSnoopingCurCfgPortId           OBJECT-TYPE
    SYNTAX      Integer32 
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Port ID of this DHCP Snooping port configration."
    ::= { dhcpSnoopingCurCfgPortTableEntry 1 }

dhcpSnoopingCurCfgPortTrusted     OBJECT-TYPE
    SYNTAX      INTEGER  {
                    trusted(1),
                    untrusted(2)
                } 
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Set port as trusted or untrusted port."
    ::= { dhcpSnoopingCurCfgPortTableEntry 2 }

dhcpSnoopingCurCfgPortRateLimit    OBJECT-TYPE
    SYNTAX      Integer32 
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Set port DHCP packet rate limit(pps). 
         Its ranges is 0 ~ 2048, set 0 to disable rate limit."
    ::= { dhcpSnoopingCurCfgPortTableEntry 3 }
         
dhcpSnoopingNewCfgPortTable             OBJECT-TYPE
    SYNTAX      SEQUENCE OF DHCPSnoopingNewCfgPortTableEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "DHCP Snooping Port Configuration Table."
    ::= { dhcpsnpCfg 6 }

dhcpSnoopingNewCfgPortTableEntry        OBJECT-TYPE
    SYNTAX      DHCPSnoopingNewCfgPortTableEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A row in the DHCP Snooping Port Configuration Table"
    INDEX  { dhcpSnoopingNewCfgportId }
    ::= { dhcpSnoopingNewCfgPortTable 1 }

DHCPSnoopingNewCfgPortTableEntry::= SEQUENCE {
    dhcpSnoopingNewCfgportId          Integer32,
    dhcpSnoopingNewCfgportTrusted      INTEGER,
    dhcpSnoopingNewCfgportRateLimit  Integer32
}

dhcpSnoopingNewCfgportId           OBJECT-TYPE
    SYNTAX      Integer32 
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Port ID of this DHCP Snooping port configration."
    ::= { dhcpSnoopingNewCfgPortTableEntry 1 }

dhcpSnoopingNewCfgportTrusted     OBJECT-TYPE
    SYNTAX      INTEGER  {
                    trusted(1),
                    untrusted(2)
                }  
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Set port as trusted or untrusted port."
::= { dhcpSnoopingNewCfgPortTableEntry 2 }

dhcpSnoopingNewCfgportRateLimit    OBJECT-TYPE
    SYNTAX      Integer32 
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Set port DHCP packet rate limit(pps). Set 0 to disable rate limit."
    ::= { dhcpSnoopingNewCfgPortTableEntry 3 }
   
dhcpSnoopingCurCfgVlanTable             OBJECT-TYPE
    SYNTAX      SEQUENCE OF DHCPSnoopingCurCfgVlanTableEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "DHCP Snooping VLAN Table."
    ::= { dhcpsnpCfg 7 }

dhcpSnoopingCurCfgVlanTableEntry        OBJECT-TYPE
    SYNTAX      DHCPSnoopingCurCfgVlanTableEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A row in the DHCP Snooping VLAN Table"
    INDEX  { dhcpSnoopingCurCfgVlanId }
    ::= { dhcpSnoopingCurCfgVlanTable 1 }

DHCPSnoopingCurCfgVlanTableEntry::= SEQUENCE {
    dhcpSnoopingCurCfgVlanId                 Integer32,
    dhcpSnoopingCurCfgVlanOnState        INTEGER
}
    
dhcpSnoopingCurCfgVlanId           OBJECT-TYPE
    SYNTAX      Integer32 (1..4094)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "VLAN ID of this DHCP Snooping VLAN configration."
    ::= { dhcpSnoopingCurCfgVlanTableEntry 1 }
    
dhcpSnoopingCurCfgVlanOnState           OBJECT-TYPE
    SYNTAX      INTEGER  {
                    on(1),
                    off(2)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "on/off state of DHCP Snooping on this VLAN."
    ::= { dhcpSnoopingCurCfgVlanTableEntry 2 }    
    
dhcpSnoopingNewCfgVlanTable             OBJECT-TYPE
    SYNTAX      SEQUENCE OF DHCPSnoopingNewCfgVLANTableEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "DHCP Snooping VLAN Table."
    ::= { dhcpsnpCfg 8 }

dhcpSnoopingNewCfgVlanTableEntry        OBJECT-TYPE
    SYNTAX      DHCPSnoopingNewCfgVLANTableEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A row in the DHCP Snooping VLAN Table"
    INDEX  { dhcpSnoopingNewCfgVlanId }
    ::= { dhcpSnoopingNewCfgVlanTable 1 }

DHCPSnoopingNewCfgVLANTableEntry ::= SEQUENCE {
    dhcpSnoopingNewCfgVlanId             Integer32,
    dhcpSnoopingNewCfgVlanOnState         INTEGER
}

dhcpSnoopingNewCfgVlanId           OBJECT-TYPE
    SYNTAX      Integer32 (1..4094)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "VLAN ID of this DHCP Snooping VLAN configration."
    ::= { dhcpSnoopingNewCfgVlanTableEntry 1 }
    
dhcpSnoopingNewCfgVlanOnState           OBJECT-TYPE
    SYNTAX      INTEGER  {
                    on(1),
                    off(2)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Enable/Disable DHCP Snooping on this VLAN."
    ::= { dhcpSnoopingNewCfgVlanTableEntry 2 }    
    
dhcpSnoopingBindingInfoTable             OBJECT-TYPE
    SYNTAX      SEQUENCE OF  DHCPSnoopingBindingInfoEntry 
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "DHCP Snooping binding Table."
    ::= { dhcpsnpInfo 1 }

dhcpSnoopingBindingInfoEntry        OBJECT-TYPE
    SYNTAX      DHCPSnoopingBindingInfoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A row in the DHCP Snooping binding Table"
    INDEX  { dhcpSnoopingBindingInfoIndex }
    ::= { dhcpSnoopingBindingInfoTable             1 }

DHCPSnoopingBindingInfoEntry ::= SEQUENCE {
	    dhcpSnoopingBindingInfoIndex        Integer32,
        dhcpSnoopingBindingInfoMac          OCTET STRING,
        dhcpSnoopingBindingInfoIp                IpAddress,
        dhcpSnoopingBindingInfoVLAN         Integer32,
        dhcpSnoopingBindingInfoPort         Integer32,
        dhcpSnoopingBindingInfoExpiry       Unsigned32,
        dhcpSnoopingBindingInfoType         INTEGER
    }

dhcpSnoopingBindingInfoIndex           OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Index of this DHCP Snooping binding entry."
    ::= { dhcpSnoopingBindingInfoEntry 1 }
    
dhcpSnoopingBindingInfoMac           OBJECT-TYPE
    SYNTAX      OCTET STRING 
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Mac Address of this DHCP Snooping binding entry."
    ::= { dhcpSnoopingBindingInfoEntry 2 }

dhcpSnoopingBindingInfoIp           OBJECT-TYPE
    SYNTAX      IpAddress 
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Ip Address of this DHCP Snooping binding entry."
    ::= { dhcpSnoopingBindingInfoEntry 3 }
    
dhcpSnoopingBindingInfoVLAN           OBJECT-TYPE
    SYNTAX      Integer32 
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "VLAN ID of this DHCP Snooping binding entry."
    ::= { dhcpSnoopingBindingInfoEntry 4 }    

dhcpSnoopingBindingInfoPort           OBJECT-TYPE
    SYNTAX      Integer32 
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Port Number of this DHCP Snooping binding entry."
    ::= { dhcpSnoopingBindingInfoEntry 5 }    

dhcpSnoopingBindingInfoExpiry           OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The lease time of this DHCP Snooping binding entry.
         Set 0 to remove this entry"
    ::= { dhcpSnoopingBindingInfoEntry 6 }
    
dhcpSnoopingBindingInfoType           OBJECT-TYPE
    SYNTAX      INTEGER  {
                    static(1),
                    dynamic(2)
                } 
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Show How this DHCP Snooping binding entry come from."
    ::= { dhcpSnoopingBindingInfoEntry 7 }
     
    
-- ----------------------------------------------------------------------------
-- { INSERT:  DHCP Snooping stat
-- ----------------------------------------------------------------------------

dhcpSnoopingStatInPacketRequest        OBJECT-TYPE
    SYNTAX      Integer32 
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Counter of DHCP REQUEST messages received."
    ::= { dhcpsnpStats 1 }
    
dhcpSnoopingStatInPacketReply           OBJECT-TYPE
    SYNTAX      Integer32 
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Counter of DHCP REPLY messages received."
    ::= { dhcpsnpStats 2 }

dhcpSnoopingStatDroppedPacketInvalid           OBJECT-TYPE
    SYNTAX      Integer32 
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Counter of dropped DHCP messages due to invalid packet."
    ::= { dhcpsnpStats 3 }

dhcpSnoopingStatDroppedPacketRateLimit           OBJECT-TYPE
    SYNTAX      Integer32 
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Counter of dropped DHCP messages due to Rate Limit in software."
    ::= { dhcpsnpStats 4 }
    
dhcpSnoopingStatDroppedPacketOther           OBJECT-TYPE
    SYNTAX      Integer32 
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Counter of dropped DHCP messages due to other reason."
    ::= { dhcpsnpStats 5 }
    

vrrpOper          OBJECT IDENTIFIER ::= { layer3Oper 1 }

dhcpInfoMacAddr OBJECT-TYPE
    SYNTAX  DisplayString
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The MAC address of the interface."
    ::= { dhcpInfo 1}

dhcpInfoAddr OBJECT-TYPE
    SYNTAX  IpAddress
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The IP address of the interface."
    ::= { dhcpInfo 2}

dhcpInfoSubnetMask OBJECT-TYPE
    SYNTAX  IpAddress
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The subnet mask of the interface."
    ::= { dhcpInfo 3}

dhcpInfoDefaultGateway OBJECT-TYPE
    SYNTAX  IpAddress
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The IP address of default gateway for the interface."
    ::= { dhcpInfo 4}

dhcpInfoServer OBJECT-TYPE
    SYNTAX  IpAddress
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The IP address of the DHCP server that leased the ip of the interface."
    ::= { dhcpInfo 5}

dhcpInfoLeaseObtained  OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..32))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The time and date when the lease was obtained ."
    ::= { dhcpInfo 6}

dhcpInfoLeaseExpires   OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..32))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The time and date when the lease was obtained ."
    ::= { dhcpInfo 7} 


-- IP Configuration

ipInterfaceTableMax OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The maximum number of rows in the IP interface table."
    ::= { ipInterfaceCfg 1 }

ipCurCfgIntfTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF IpCurCfgIntfEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table of IP interface configuration."
    ::= { ipInterfaceCfg 2 }

ipCurCfgIntfEntry OBJECT-TYPE
    SYNTAX  IpCurCfgIntfEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A row in the Ip interface table"
    INDEX   { ipCurCfgIntfIndex }
    ::= { ipCurCfgIntfTable 1 }

IpCurCfgIntfEntry ::= SEQUENCE {
    ipCurCfgIntfIndex         Integer32,
    ipCurCfgIntfAddr          DisplayString,
    ipCurCfgIntfMask          DisplayString,
    ipCurCfgIntfBroadcast     IpAddress,
    ipCurCfgIntfState         INTEGER,
    ipCurCfgIntfBootpRelay    INTEGER,
    ipCurCfgIntfRouteAdv      INTEGER,
    ipCurCfgIntfManagedCfg    INTEGER,
    ipCurCfgIntfOtherCfg      INTEGER,
    ipCurCfgIntfAdvLifetime   INTEGER,
    ipCurCfgIntfDadAttempts   INTEGER,
    ipCurCfgIntfReachTime     Gauge32,
    ipCurCfgIntfAdvInterval   INTEGER,
    ipCurCfgIntfAdvIntervalMin    INTEGER,
    ipCurCfgIntfRetransmitTimer   Gauge32,
    ipCurCfgIntfHopLimit          INTEGER,
    ipCurCfgIntfAdvMtu          INTEGER,
    ipCurCfgIntfIp6Host       INTEGER,
    ipCurCfgIntfIp6Dstun      INTEGER,
    ipCurCfgSecIntfAddr          DisplayString,
    ipCurCfgSecIntfPrefix        Integer32,
    ipCurCfgSecIntfAnycast       INTEGER, 
    ipCurCfgIntfAnycast          INTEGER, 
    ipCurCfgIntfVlan          Integer32
    }

ipCurCfgIntfIndex OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The interface number for which the IP information is related."
    ::= { ipCurCfgIntfEntry 1}

ipCurCfgIntfAddr OBJECT-TYPE
    SYNTAX  DisplayString  (SIZE(0..40))
    MAX-ACCESS read-only
    STATUS  current
    DESCRIPTION
        "This field configures the new IP/IPv6 addr of the interface.
         Address should be IPv4 dotted-quads or IPv6 16-byte hexadecimal 
         colon notation.
         Valid IPv6 address should be in any of the following forms
           xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
           xxxx::xxxx:xxxx:xxxx:xxxx"
    ::= { ipCurCfgIntfEntry 2 }

ipCurCfgIntfMask OBJECT-TYPE
    SYNTAX  DisplayString  (SIZE(0..15))
    MAX-ACCESS read-only
    STATUS  current
    DESCRIPTION
        "The subnet mask as IPv4 dotted-quads OR
         the IPv6 prefix length (integer in range 0..128)
         associated with this IP address ."
    ::= { ipCurCfgIntfEntry 3 }

ipCurCfgIntfBroadcast OBJECT-TYPE
    SYNTAX  IpAddress
    MAX-ACCESS  read-only
    STATUS  obsolete  
    DESCRIPTION
        "The broadcast address of the interface."
    ::= { ipCurCfgIntfEntry 4 }

ipCurCfgIntfVlan OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current  
    DESCRIPTION
        "The VLAN associated with the interface."
    ::= { ipCurCfgIntfEntry 5 }

ipCurCfgIntfState OBJECT-TYPE
    SYNTAX  INTEGER { 
    enabled(2),
    disabled(3)
    }
    MAX-ACCESS  read-only
    STATUS  current  
    DESCRIPTION
        "The state of the interface."
    ::= { ipCurCfgIntfEntry 6 }

ipCurCfgIntfBootpRelay OBJECT-TYPE
    SYNTAX  INTEGER { 
    enabled(1),
    disabled(2)
    }
    MAX-ACCESS  read-only
    STATUS  current  
    DESCRIPTION
        "Enable/disable BOOTP relay."
    ::= { ipCurCfgIntfEntry 7 }


ipCurCfgIntfRouteAdv  OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable/disable route advertisement of the interface."
    ::= { ipCurCfgIntfEntry 12 }

ipCurCfgIntfManagedCfg  OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable/disable Managed config flag of the interface, which
         allows the host to use DHCP for address configuration."
    ::= { ipCurCfgIntfEntry 13 }

ipCurCfgIntfOtherCfg  OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable/disable Other config flag of the interface,
        which allows the host to use DHCP for other stateful configuration."
    ::= { ipCurCfgIntfEntry 14 }

ipCurCfgIntfAdvLifetime  OBJECT-TYPE
    SYNTAX  INTEGER (0..9000)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Set Router Advertisement lifetime of the interface."
    ::= { ipCurCfgIntfEntry 15 }

ipCurCfgIntfDadAttempts  OBJECT-TYPE
    SYNTAX  INTEGER (1..10)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Set the number of duplicate address detection (dad)
        attempts of the interface."
    ::= { ipCurCfgIntfEntry 16 }

ipCurCfgIntfReachTime  OBJECT-TYPE
    SYNTAX  Gauge32 (0..3600000)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Set the advertised reachability time of the interface in ms."
    ::= { ipCurCfgIntfEntry 17 }

ipCurCfgIntfAdvInterval  OBJECT-TYPE
    SYNTAX  INTEGER (4..1800)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Set the IPv6 Router Advertisement interval of the interface."
    ::= { ipCurCfgIntfEntry 18 }

ipCurCfgIntfAdvIntervalMin  OBJECT-TYPE
    SYNTAX  INTEGER (3..1350)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Set the IPv6 Router Advertisement Minimum interval limit 
        of the interface."
    ::= { ipCurCfgIntfEntry 19 }

ipCurCfgIntfRetransmitTimer  OBJECT-TYPE
    SYNTAX  Gauge32 (0..4294967295)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Set the IPv6 Router Advertisement Retransmit Timer in ms."
    ::= { ipCurCfgIntfEntry 20 }

ipCurCfgIntfHopLimit  OBJECT-TYPE
    SYNTAX  INTEGER (0..255)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Set the IPv6 Router Advertisement Current Hop Limit"
    ::= { ipCurCfgIntfEntry 21 }

ipCurCfgIntfAdvMtu  OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable/disable Advertise MTU option."
    ::= { ipCurCfgIntfEntry 22 }

ipCurCfgIntfIp6Host  OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable/disable IPv6 host mode on the interface."
    ::= { ipCurCfgIntfEntry 23 }

ipCurCfgSecIntfAddr OBJECT-TYPE
    SYNTAX  DisplayString  (SIZE(0..40))
    MAX-ACCESS read-only
    STATUS  current
    DESCRIPTION
        "This field configures the new IP/IPv6 addr of the interface.
         Address should be in IPv6 4-byte haxadecimal 
         colon notation.
         Valid IPv6 address should be in any of the following forms
           xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
           xxxx::xxxx:xxxx:xxxx:xxxx"
    ::= { ipCurCfgIntfEntry 25 }

ipCurCfgSecIntfPrefix OBJECT-TYPE
    SYNTAX  Integer32 
    MAX-ACCESS read-only
    STATUS  current
    DESCRIPTION
        "The IPv6 prefix length (integer in range 0..128)
         associated with this IP address ."
    ::= { ipCurCfgIntfEntry 26 }

ipCurCfgIntfAnycast  OBJECT-TYPE
    SYNTAX  INTEGER {
        anycast(1),
        none(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "This field has the value of anycast(1) if IPv6 interface address
         is anycast and none(2) if not."
    ::= { ipCurCfgIntfEntry 27 }

ipCurCfgSecIntfAnycast  OBJECT-TYPE
    SYNTAX  INTEGER {
        anycast(1),
        none(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "This field has the value of anycast(1) if secondary IPv6 interface address
         is anycast and none(2) if not."
    ::= { ipCurCfgIntfEntry 28 }
ipCurCfgIntfIp6Dstun  OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable/disable sending of ICMP Unreachable messages."
    ::= { ipCurCfgIntfEntry 29 }

ipNewCfgIntfTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF IpNewCfgIntfEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table of interface in the new configuration block."
    ::= { ipInterfaceCfg 3 }

ipNewCfgIntfEntry OBJECT-TYPE
    SYNTAX  IpNewCfgIntfEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A row in the Ip interface table"
    INDEX   { ipNewCfgIntfIndex }
    ::= { ipNewCfgIntfTable 1 }
 
IpNewCfgIntfEntry ::= SEQUENCE {
    ipNewCfgIntfIndex         Integer32,
    ipNewCfgIntfAddr          DisplayString,
    ipNewCfgIntfMask          DisplayString,
    ipNewCfgIntfVlan          Integer32,
    ipNewCfgIntfState         INTEGER,
    ipNewCfgIntfBootpRelay    INTEGER,
    ipNewCfgIntfRouteAdv      INTEGER,
    ipNewCfgIntfIp6Host       INTEGER,
    ipNewCfgIntfIp6Dstun      INTEGER,
    ipNewCfgIntfManagedCfg    INTEGER,
    ipNewCfgIntfOtherCfg      INTEGER,
    ipNewCfgIntfAdvLifetime   INTEGER,
    ipNewCfgIntfDadAttempts   INTEGER,
    ipNewCfgIntfReachTime     Gauge32,
    ipNewCfgIntfAdvInterval   INTEGER,
    ipNewCfgIntfAdvIntervalMin    INTEGER,
    ipNewCfgIntfRetransmitTimer   Gauge32,
    ipNewCfgIntfHopLimit          INTEGER,
    ipNewCfgIntfAdvMtu            INTEGER,
    ipNewCfgSecIntfAddr          DisplayString,
    ipNewCfgSecIntfPrefix        Integer32,
    ipNewCfgSecIntfAnycast       INTEGER, 
    ipNewCfgIntfAnycast          INTEGER, 
    ipNewCfgIntfDelete        INTEGER
    }
 
ipNewCfgIntfIndex OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
    "The interface number for which the IP information is related."
    ::= { ipNewCfgIntfEntry 1 }

ipNewCfgIntfAddr OBJECT-TYPE
    SYNTAX  DisplayString  (SIZE(0..40))
    MAX-ACCESS read-create
    STATUS  current
    DESCRIPTION
        "This field configures the new IP/IPv6 addr of the interface.
         Address should be IPv4 dotted-quads or IPv6 16-byte hexadecimal 
         colon notation.
         Valid IPv6 address should be in any of the following forms
           xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
           xxxx::xxxx:xxxx:xxxx:xxxx"
    ::= { ipNewCfgIntfEntry 2 }

ipNewCfgIntfMask OBJECT-TYPE
    SYNTAX  DisplayString  (SIZE(0..15))
    MAX-ACCESS read-create
    STATUS  current
    DESCRIPTION
        "The subnet mask as IPv4 dotted-quads OR
         the IPv6 prefix length (integer in range 0..128)
         associated with this IP address ."
    ::= { ipNewCfgIntfEntry 3 }


ipNewCfgIntfVlan OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-create
    STATUS  current  
    DESCRIPTION
        "The VLAN associated with the interface."
    ::= { ipNewCfgIntfEntry 5 }

ipNewCfgIntfState OBJECT-TYPE
    SYNTAX  INTEGER { 
    enabled(2),
    disabled(3)
    }
    MAX-ACCESS  read-create
    STATUS  current  
    DESCRIPTION
        "The state of the interface."
    ::= { ipNewCfgIntfEntry 6 }

ipNewCfgIntfDelete OBJECT-TYPE
    SYNTAX  INTEGER { 
    other(1),
        delete(2)
    }
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "When set to the value of 2 (delete), the entire row is deleted. 
         When read, other(1) is returned. Setting the value to anything 
         other than 2(delete) has no effect on the state of the row."
    ::= { ipNewCfgIntfEntry 7 }

ipNewCfgIntfBootpRelay OBJECT-TYPE
    SYNTAX  INTEGER { 
    enabled(1),
    disabled(2)
    }
    MAX-ACCESS  read-create
    STATUS  current  
    DESCRIPTION
        "Enable/disable BOOTP relay."
    ::= { ipNewCfgIntfEntry 8 }


ipNewCfgIntfRouteAdv  OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "Enable/disable route advertisement of the interface."
    ::= { ipNewCfgIntfEntry 13 }

ipNewCfgIntfManagedCfg  OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "Enable/disable Managed config flag of the interface, which 
         allows the host to use DHCP for address configuration."
    ::= { ipNewCfgIntfEntry 14 }

ipNewCfgIntfOtherCfg  OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "Enable/disable Other config flag of the interface, 
        which allows the host to use DHCP for other stateful configuration."
    ::= { ipNewCfgIntfEntry 15 }

ipNewCfgIntfAdvLifetime  OBJECT-TYPE
    SYNTAX  INTEGER (0..9000)
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "Set Router Advertisement lifetime of the interface."
    ::= { ipNewCfgIntfEntry 16 }

ipNewCfgIntfDadAttempts  OBJECT-TYPE
    SYNTAX  INTEGER (1..10)
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "Set the number of duplicate address detection (dad) 
        attempts of the interface."
    ::= { ipNewCfgIntfEntry 17 }

ipNewCfgIntfReachTime  OBJECT-TYPE
    SYNTAX  Gauge32 (0..3600000)
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "Set the advertised reachability time of the interface in ms."
    ::= { ipNewCfgIntfEntry 18 }

ipNewCfgIntfAdvInterval  OBJECT-TYPE
    SYNTAX  INTEGER (4..1800)
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "Set the IPv6 Router Advertisement interval of the interface."
    ::= { ipNewCfgIntfEntry 19 }

ipNewCfgIntfAdvIntervalMin  OBJECT-TYPE
    SYNTAX  INTEGER (3..1350)
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "Set the IPv6 Router Advertisement Minimum interval limit 
        of the interface."
    ::= { ipNewCfgIntfEntry 20 }

ipNewCfgIntfRetransmitTimer  OBJECT-TYPE
    SYNTAX  Gauge32 (0..4294967295)
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "Set the IPv6 Router Advertisement Retransmit Timer in ms."
    ::= { ipNewCfgIntfEntry 21 }

ipNewCfgIntfHopLimit  OBJECT-TYPE
    SYNTAX  INTEGER (0..255)
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "Set the IPv6 Router Advertisement Current Hop Limit"
    ::= { ipNewCfgIntfEntry 22 }

ipNewCfgIntfAdvMtu  OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "Enable/disable Advertise MTU option."
    ::= { ipNewCfgIntfEntry 23 }

ipNewCfgIntfIp6Host  OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "Enable/disable IPv6 host mode on the interface."
    ::= { ipNewCfgIntfEntry 24 }


ipNewCfgSecIntfAddr OBJECT-TYPE
    SYNTAX  DisplayString  (SIZE(0..40))
    MAX-ACCESS read-write
    STATUS  current
    DESCRIPTION
        "This field configures the new IPv6 addr of the interface.
         Address should be in IPv6 4-byte haxadecimal 
         colon notation.
         Valid IPv6 address should be in any of the following forms
           xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
           xxxx::xxxx:xxxx:xxxx:xxxx"
    ::= { ipNewCfgIntfEntry 26 }

ipNewCfgSecIntfPrefix OBJECT-TYPE
    SYNTAX  Integer32 
    MAX-ACCESS read-write
    STATUS  current
    DESCRIPTION
        "The IPv6 prefix length (integer in range 0..128)
         associated with this IP address ."
    ::= { ipNewCfgIntfEntry 27 }

ipNewCfgIntfAnycast  OBJECT-TYPE
    SYNTAX  INTEGER {
        anycast(1),
        none(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "This field has the value of anycast(1) if IPv6 interface address
         is anycast and none(2) if not."
    ::= { ipNewCfgIntfEntry 28 }

ipNewCfgSecIntfAnycast  OBJECT-TYPE
    SYNTAX  INTEGER {
        anycast(1),
        none(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "This field has the value of anycast(1) if secondary IPv6 interface address
         is anycast and none(2) if not."
    ::= { ipNewCfgIntfEntry 29 }
ipNewCfgIntfIp6Dstun  OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "Enable/disable sending of ICMP Unreachable messages."
    ::= { ipNewCfgIntfEntry 30 }


-- IP Loopback Configuration

ipInterfaceLoopbackTableMax OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The maximum number of rows in the IP Loopback interface table."
    ::= { ipInterfaceLoopbackCfg 1 }

ipCurCfgIntfLoopbackTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF IpCurCfgIntfLoopbackEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table of IP Loopback interface configuration."
    ::= { ipInterfaceLoopbackCfg 2 }

ipCurCfgIntfLoopbackEntry OBJECT-TYPE
    SYNTAX  IpCurCfgIntfLoopbackEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A row in the Ip Loopback interface table"
    INDEX   { ipCurCfgIntfLoopbackIndex }
    ::= { ipCurCfgIntfLoopbackTable 1 }

IpCurCfgIntfLoopbackEntry ::= SEQUENCE {
    ipCurCfgIntfLoopbackIndex         Integer32,
    ipCurCfgIntfLoopbackAddr          IpAddress,
    ipCurCfgIntfLoopbackMask          IpAddress,
    ipCurCfgIntfLoopbackBroadcast     IpAddress,
    ipCurCfgIntfLoopbackState         INTEGER 
    }
 
ipCurCfgIntfLoopbackIndex OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The Loopback interface number for which the IP information is related."
    ::= { ipCurCfgIntfLoopbackEntry 1}

ipCurCfgIntfLoopbackAddr OBJECT-TYPE
    SYNTAX  IpAddress
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The IP address of the interface."
    ::= { ipCurCfgIntfLoopbackEntry 2 }

ipCurCfgIntfLoopbackMask OBJECT-TYPE
    SYNTAX  IpAddress
    MAX-ACCESS  read-only
    STATUS  current  
    DESCRIPTION
        "The subnet mask of the interface."
    ::= { ipCurCfgIntfLoopbackEntry 3 }

ipCurCfgIntfLoopbackBroadcast OBJECT-TYPE
    SYNTAX  IpAddress
    MAX-ACCESS  read-only
    STATUS  current  
    DESCRIPTION
        "The broadcast address of the interface."
    ::= { ipCurCfgIntfLoopbackEntry 4 }

ipCurCfgIntfLoopbackState OBJECT-TYPE
    SYNTAX  INTEGER { 
    enabled(2),
    disabled(3)
    }
    MAX-ACCESS  read-only
    STATUS  current  
    DESCRIPTION
        "The state of the interface."
    ::= { ipCurCfgIntfLoopbackEntry 6 }

ipNewCfgIntfLoopbackTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF IpNewCfgIntfLoopbackEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table of loopback interface in the new configuration block."
    ::= { ipInterfaceLoopbackCfg 3 }

ipNewCfgIntfLoopbackEntry OBJECT-TYPE
    SYNTAX  IpNewCfgIntfLoopbackEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A row in the Ip Loopback interface table"
    INDEX   { ipNewCfgIntfLoopbackIndex }
    ::= { ipNewCfgIntfLoopbackTable 1 }
 
IpNewCfgIntfLoopbackEntry ::= SEQUENCE {
    ipNewCfgIntfLoopbackIndex         Integer32,
    ipNewCfgIntfLoopbackAddr          IpAddress,
    ipNewCfgIntfLoopbackMask          IpAddress,
    ipNewCfgIntfLoopbackState         INTEGER,
    ipNewCfgIntfLoopbackDelete        INTEGER
    }
 
ipNewCfgIntfLoopbackIndex OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
    "The Loopback interface number for which the IP information is related."
    ::= { ipNewCfgIntfLoopbackEntry 1 }

ipNewCfgIntfLoopbackAddr OBJECT-TYPE
    SYNTAX  IpAddress
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "The IP address of the interface."
    ::= { ipNewCfgIntfLoopbackEntry 2 }

ipNewCfgIntfLoopbackMask OBJECT-TYPE
    SYNTAX  IpAddress
    MAX-ACCESS  read-create
    STATUS  current  
    DESCRIPTION
        "The subnet mask of the interface."
    ::= { ipNewCfgIntfLoopbackEntry 3 }

ipNewCfgIntfLoopbackState OBJECT-TYPE
    SYNTAX  INTEGER { 
    enabled(2),
    disabled(3)
    }
    MAX-ACCESS  read-create
    STATUS  current  
    DESCRIPTION
        "The state of the interface."
    ::= { ipNewCfgIntfLoopbackEntry 6 }

ipNewCfgIntfLoopbackDelete OBJECT-TYPE
    SYNTAX  INTEGER { 
    other(1),
        delete(2)
    }
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "When set to the value of 2 (delete), the entire row is deleted. 
         When read, other(1) is returned. Setting the value to anything 
         other than 2(delete) has no effect on the state of the row."
    ::= { ipNewCfgIntfLoopbackEntry 7 }


-- IP Gateway Table Configuration


ipGatewayTableMax OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The maximum number of rows in the IP gateway table."
    ::= { ipGatewayCfg 3 }

ipCurCfgGwTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF IpCurCfgGwEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table of gateways in the current configuration block."
    ::= { ipGatewayCfg 4 }

ipCurCfgGwEntry OBJECT-TYPE
    SYNTAX  IpCurCfgGwEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A row in the Ip gateway table"
    INDEX   { ipCurCfgGwIndex }
    ::= { ipCurCfgGwTable 1 }

IpCurCfgGwEntry ::= SEQUENCE {
    ipCurCfgGwIndex         Integer32,
    ipCurCfgGwAddr          IpAddress,
    ipCurCfgGwInterval      INTEGER,
    ipCurCfgGwRetry         INTEGER,
    ipCurCfgGwArp           INTEGER,
    ipCurCfgGwState         INTEGER
    }

ipCurCfgGwIndex OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The gateway number for which the information is related."
    ::= { ipCurCfgGwEntry 1}

ipCurCfgGwAddr OBJECT-TYPE
    SYNTAX  IpAddress
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The IP address of the default gateway."
    ::= { ipCurCfgGwEntry 2 }

ipCurCfgGwInterval OBJECT-TYPE 
    SYNTAX  INTEGER (0..60)
    MAX-ACCESS  read-only 
    STATUS  current 
    DESCRIPTION 
        "The interval between ping attempts." 
    ::= { ipCurCfgGwEntry 3 }

ipCurCfgGwRetry OBJECT-TYPE
    SYNTAX  INTEGER (1..120)   
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The number of failed attempts to declare the default gateway DOWN."
    ::= { ipCurCfgGwEntry 4 }

ipCurCfgGwState OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(2),
        disabled(3)
    }  
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The state of the default gateway."
    ::= { ipCurCfgGwEntry 5 }

ipCurCfgGwArp OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(2),
        disabled(3)
        } 
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The state of ARP only health checks."
    ::= { ipCurCfgGwEntry 6 }



ipNewCfgGwTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF IpNewCfgGwEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table of gateway in the new configuration block."
    ::= { ipGatewayCfg 5 }

ipNewCfgGwEntry OBJECT-TYPE
    SYNTAX  IpNewCfgGwEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A row in the Ip default gateway table"
    INDEX   { ipNewCfgGwIndex }
    ::= { ipNewCfgGwTable 1 }

IpNewCfgGwEntry ::= SEQUENCE {
    ipNewCfgGwIndex         Integer32,
    ipNewCfgGwAddr          IpAddress,
    ipNewCfgGwInterval      INTEGER,
    ipNewCfgGwRetry         INTEGER,
    ipNewCfgGwState         INTEGER,
    ipNewCfgGwArp           INTEGER,
    ipNewCfgGwDelete        INTEGER
    }

ipNewCfgGwIndex OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The gateway number for which the information is related."
    ::= { ipNewCfgGwEntry 1}

ipNewCfgGwAddr OBJECT-TYPE
    SYNTAX  IpAddress
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "The IP address of the default gateway."
    ::= { ipNewCfgGwEntry 2 }

ipNewCfgGwInterval OBJECT-TYPE 
    SYNTAX  INTEGER (0..60)
    MAX-ACCESS  read-create 
    STATUS  current 
    DESCRIPTION 
        "The interval in seconds between ping attempts." 
    ::= { ipNewCfgGwEntry 3 }

ipNewCfgGwRetry OBJECT-TYPE
    SYNTAX  INTEGER (1..120)   
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "The number of failed attempts to declare the default gateway DOWN."
    ::= { ipNewCfgGwEntry 4 }

ipNewCfgGwState OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(2),
        disabled(3)
    }
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "The state of the default gateway."
    ::= { ipNewCfgGwEntry 5 }

ipNewCfgGwDelete OBJECT-TYPE
    SYNTAX  INTEGER {
    other(1),
        delete(2)
        }
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "When set to the value of 2 (delete), the entire row is deleted. 
         When read, other is returned. Setting the value to anything other 
         than 2(delete) has no effect on the state of the row."
    ::= { ipNewCfgGwEntry 6 }

ipNewCfgGwArp OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(2),
        disabled(3)
        }
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "The state of the ARP only health checks."
    ::= { ipNewCfgGwEntry 7 }




--
-- IP Static Route Configuration
--
ipStaticRouteTableMaxSize OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The maximum number of rows in the Static Route table."
    ::= { ipStaticRouteCfg 1 }


ipCurCfgStaticRouteTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF IpCurCfgStaticRouteEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table of static routes in the current configuration block."
    ::= { ipStaticRouteCfg 2 }

ipCurCfgStaticRouteEntry OBJECT-TYPE
    SYNTAX  IpCurCfgStaticRouteEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A row in the static IP route table"
    INDEX   { ipCurCfgStaticRouteIndx }
    ::= { ipCurCfgStaticRouteTable 1 }

IpCurCfgStaticRouteEntry ::= SEQUENCE {
    ipCurCfgStaticRouteIndx         Integer32,
    ipCurCfgStaticRouteDestIp       IpAddress,
    ipCurCfgStaticRouteMask         IpAddress,
    ipCurCfgStaticRouteGateway      IpAddress,
    ipCurCfgStaticRouteInterface    Integer32
    }

ipCurCfgStaticRouteIndx OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The index of the static routing table."
    ::= { ipCurCfgStaticRouteEntry 1}

ipCurCfgStaticRouteDestIp OBJECT-TYPE
    SYNTAX  IpAddress
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The destination IP address of this route."
    ::= { ipCurCfgStaticRouteEntry 2}

ipCurCfgStaticRouteMask OBJECT-TYPE 
    SYNTAX  IpAddress
    MAX-ACCESS  read-only 
    STATUS  current 
    DESCRIPTION 
        "The current subnet mask of this route."
    ::= { ipCurCfgStaticRouteEntry 3}

ipCurCfgStaticRouteGateway OBJECT-TYPE 
    SYNTAX  IpAddress
    MAX-ACCESS  read-only 
    STATUS  current 
    DESCRIPTION 
        "The current gateway of this route."
    ::= { ipCurCfgStaticRouteEntry 4}

ipCurCfgStaticRouteInterface OBJECT-TYPE 
    SYNTAX  Integer32
    MAX-ACCESS  read-only 
    STATUS  current 
    DESCRIPTION 
        "The IP interface of this route.  The IP address of the specified 
         interface shall be use as source IP when performs routing."
    ::= { ipCurCfgStaticRouteEntry 5}

ipNewCfgStaticRouteTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF IpNewCfgStaticRouteEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table of static routes in the new configuration block."
    ::= { ipStaticRouteCfg 3 }

ipStaticRouteClearAllByDestIp OBJECT-TYPE
    SYNTAX  IpAddress
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Clears all static routes with the specified destination IP address."
    ::= { ipStaticRouteCfg 4}

ipStaticRouteClearAllByGatewayIp OBJECT-TYPE
    SYNTAX  IpAddress
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Clears all static routes with the specified gateway IP address."
    ::= { ipStaticRouteCfg 5}

ipStaticRouteClearAllByInterface OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Clears all routes on the specified inteface number."
    ::= { ipStaticRouteCfg 6}

ipStaticRouteClearAll OBJECT-TYPE
    SYNTAX INTEGER { 
    ok(1),
    clear(2)
    }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "When set to clear(2),clears all static routes. Otherwhise nothing is done."
    ::= { ipStaticRouteCfg 7}
ipStaticRouteCurPingInterval OBJECT-TYPE
    SYNTAX INTEGER
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The time between ping retries."
    ::= { ipStaticRouteCfg 8}
ipStaticRouteNewPingInterval OBJECT-TYPE
    SYNTAX INTEGER
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The time between ping retries."
    ::= { ipStaticRouteCfg 9}
ipStaticRouteCurPingRetries OBJECT-TYPE
    SYNTAX INTEGER
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The number of ping retries."
    ::= { ipStaticRouteCfg 10}
ipStaticRouteNewPingRetries OBJECT-TYPE
    SYNTAX INTEGER
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The number of ping retries."
    ::= { ipStaticRouteCfg 11}
ipStaticRouteCurEcmpHash OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Ecmp Hash mechanism.It is a BIT mask
      which represents the combination of
      different parameters which can be used for
      ECMP hashing
      ECMP_HASH_SIP  ------ 0x00000001
        - Include Source IP for ECMP hash
      ECMP_HASH_DIP  ------ 0x00000002
        - Include destination IP for ECMP hash
      ECMP_HASH_PROT ------ 0x00000004
        - Include layer3 protocol for ECMP hash
      ECMP_HASH_TCP  ------ 0x00000008
        - Enable L4 source/destination port hash if protocl is TCP
      ECMP_HASH_UDP  ------ 0x00000010
        - Enable L4 source/destination port hash if protocl is UDP
      ECMP_HASH_L4SRC------ 0x00000020
        - Include L4 source port for ECMP hash 
      ECMP_HASH_L4DST------ 0x00000040
        - Include L4 destination port for ECMP hash
      "
    ::= { ipStaticRouteCfg 12}
ipStaticRouteNewEcmpHash OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Ecmp Hash mechanism.It is a BIT mask
      which represents the combination of
      different parameters which can be used for
      ECMP hashing
      ECMP_HASH_SIP  ------ 0x00000001
        - Include Source IP for ECMP hash
      ECMP_HASH_DIP  ------ 0x00000002
        - Include destination IP for ECMP hash
      ECMP_HASH_PROT ------ 0x00000004
        - Include layer3 protocol for ECMP hash
      ECMP_HASH_TCP  ------ 0x00000008
        - Enable L4 source/destination port hash if protocl is TCP
      ECMP_HASH_UDP  ------ 0x00000010
        - Enable L4 source/destination port hash if protocl is UDP
      ECMP_HASH_L4SRC------ 0x00000020
        - Include L4 source port for ECMP hash
      ECMP_HASH_L4DST------ 0x00000040
        - Include L4 destination port for ECMP hash
      "
    ::= { ipStaticRouteCfg 13}


ipStaticRouteCurHealthcheck OBJECT-TYPE
    SYNTAX  INTEGER {
        disable(0),
        enable(1)
    }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Gateway healthcheck functionality"
    ::= { ipStaticRouteCfg 16}

ipStaticRouteNewHealthcheck OBJECT-TYPE
    SYNTAX  INTEGER {
        disable(0),
        enable(1)
    }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Gateway healthcheck functionality"
    ::= { ipStaticRouteCfg 17}


ipNewCfgStaticRouteEntry OBJECT-TYPE
    SYNTAX  IpNewCfgStaticRouteEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A row in the static IP route table"
    INDEX   { ipNewCfgStaticRouteIndx }
    ::= { ipNewCfgStaticRouteTable 1 }

IpNewCfgStaticRouteEntry ::= SEQUENCE {
    ipNewCfgStaticRouteIndx         Integer32,
    ipNewCfgStaticRouteDestIp       IpAddress,
    ipNewCfgStaticRouteMask         IpAddress,
    ipNewCfgStaticRouteGateway      IpAddress,
    ipNewCfgStaticRouteAction       INTEGER,
    ipNewCfgStaticRouteInterface    Integer32
    }

ipNewCfgStaticRouteIndx OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The index of the static routing table."
    ::= { ipNewCfgStaticRouteEntry 1}

ipNewCfgStaticRouteDestIp OBJECT-TYPE
    SYNTAX  IpAddress
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "The destination IP address of this route."
    ::= { ipNewCfgStaticRouteEntry 2}

ipNewCfgStaticRouteMask OBJECT-TYPE 
    SYNTAX  IpAddress
    MAX-ACCESS  read-create 
    STATUS  current 
    DESCRIPTION 
        "The subnet mask of this route."
    ::= { ipNewCfgStaticRouteEntry 3}

ipNewCfgStaticRouteGateway OBJECT-TYPE 
    SYNTAX  IpAddress
    MAX-ACCESS  read-create 
    STATUS  current 
    DESCRIPTION 
        "The IP address of the gateway for this route."
    ::= { ipNewCfgStaticRouteEntry 4}

ipNewCfgStaticRouteAction OBJECT-TYPE
    SYNTAX  INTEGER {
        other(1),
        delete(2)
       }  
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "When set to the value of 2 (delete), the entire row is deleted. 
         When read, other is returned. Setting the value to anything other 
         than 2(delete) has no effect on the state of the row."
    ::= { ipNewCfgStaticRouteEntry 5 }

ipNewCfgStaticRouteInterface OBJECT-TYPE 
    SYNTAX  Integer32
    MAX-ACCESS  read-create 
    STATUS  current 
    DESCRIPTION 
        "The IP interface of this route.  The IP address of the specified 
         interface shall be use as source IP when performs routing."
    ::= { ipNewCfgStaticRouteEntry 6 }



-- RIP version 2 Configuration 

ripCurCfgIntfTable OBJECT-TYPE
    SYNTAX SEQUENCE OF RipCurCfgIntfEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "The table of RIP on IP interface in the current configuration block."
    ::= { rip2Cfg 1 }

ripCurCfgIntfEntry OBJECT-TYPE
    SYNTAX RipCurCfgIntfEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "Information about  RIP on IP interface."
    INDEX { ripCurCfgIntfIndex }
    ::= { ripCurCfgIntfTable 1 }
 
RipCurCfgIntfEntry ::= SEQUENCE {
    ripCurCfgIntfIndex      Integer32,
    ripCurCfgIntfVersion    INTEGER,
    ripCurCfgIntfSupply     INTEGER,
    ripCurCfgIntfListen     INTEGER,
    ripCurCfgIntfTrigUpdate INTEGER,
    ripCurCfgIntfMcastUpdate    INTEGER,
    ripCurCfgIntfPoisonReverse  INTEGER,
    ripCurCfgIntfState      INTEGER,
    ripCurCfgIntfMetric         INTEGER, 
    ripCurCfgIntfAuth           INTEGER, 
    ripCurCfgIntfKey            DisplayString,
    ripCurCfgIntfDefault    INTEGER,
    ripCurCfgIntfSplitHorizon   INTEGER
    }
 
ripCurCfgIntfIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The interface number for which the RIP information is related."
    ::= { ripCurCfgIntfEntry 1}

ripCurCfgIntfVersion OBJECT-TYPE
    SYNTAX INTEGER {
        ripVersion1(1),
        ripVersion2(2),
        ripVersionBoth(3)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "RIP version."
    ::= { ripCurCfgIntfEntry 2 }

ripCurCfgIntfState OBJECT-TYPE
    SYNTAX INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Enable or disable RIP protocol."
    ::= { ripCurCfgIntfEntry 3 }


ripCurCfgIntfListen OBJECT-TYPE
    SYNTAX INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Enable or disable listening to route updates."
    ::= { ripCurCfgIntfEntry 4 }
 

ripCurCfgIntfTrigUpdate OBJECT-TYPE
    SYNTAX INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "Enable or disable triggered updates."
    ::= { ripCurCfgIntfEntry 6 }

ripCurCfgIntfMcastUpdate OBJECT-TYPE
    SYNTAX INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "Enable or disable multicast updates."
    ::= { ripCurCfgIntfEntry 7 }

ripCurCfgIntfPoisonReverse OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "RIP poison reverse."
    ::= { ripCurCfgIntfEntry 8 }

ripCurCfgIntfSupply OBJECT-TYPE
    SYNTAX INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Enable or disable supplying route updates."
    ::= { ripCurCfgIntfEntry 9 }

ripCurCfgIntfMetric OBJECT-TYPE
    SYNTAX  INTEGER (1..15)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "RIP route metric for this interface."
    ::= { ripCurCfgIntfEntry 10 }

ripCurCfgIntfAuth OBJECT-TYPE
    SYNTAX INTEGER {
        none(1),
        password(2)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The type of Authentication used on this interface."
    ::= { ripCurCfgIntfEntry 11 }

ripCurCfgIntfKey OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..16))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "RIP update authentication password."
    ::= { ripCurCfgIntfEntry 12 }

ripCurCfgIntfDefault OBJECT-TYPE
    SYNTAX  INTEGER {
        both(1),
        listen(2),
        supply(3),
        none(4)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "Specifies what RIP does with default routes."
    ::= { ripCurCfgIntfEntry 13 }

ripCurCfgIntfSplitHorizon OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(2),
        disabled(3)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
         "RIP split horizon."
    ::= {ripCurCfgIntfEntry 14 }

ripNewCfgIntfTable OBJECT-TYPE
    SYNTAX SEQUENCE OF RipNewCfgIntfEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "The table of RIP on IP interface in the new configuration block."
    ::= { rip2Cfg 2 }

ripNewCfgIntfEntry OBJECT-TYPE
    SYNTAX RipNewCfgIntfEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "Information about  RIP on IP interface."
    INDEX { ripNewCfgIntfIndex }
    ::= { ripNewCfgIntfTable 1 }
 
RipNewCfgIntfEntry ::= SEQUENCE {
    ripNewCfgIntfIndex      Integer32,
    ripNewCfgIntfVersion    INTEGER,
    ripNewCfgIntfSupply     INTEGER,
    ripNewCfgIntfListen     INTEGER,
    ripNewCfgIntfTrigUpdate INTEGER,
    ripNewCfgIntfMcastUpdate    INTEGER,
    ripNewCfgIntfPoisonReverse  INTEGER,
    ripNewCfgIntfState      INTEGER,
    ripNewCfgIntfMetric         INTEGER, 
    ripNewCfgIntfAuth           INTEGER, 
    ripNewCfgIntfKey            DisplayString,
    ripNewCfgIntfDefault    INTEGER,
    ripNewCfgIntfSplitHorizon   INTEGER
    }
 
ripNewCfgIntfIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The interface number for which the RIP information is related."
    ::= { ripNewCfgIntfEntry 1}

ripNewCfgIntfVersion OBJECT-TYPE
    SYNTAX INTEGER {
        ripVersion1(1),
        ripVersion2(2),
        ripVersionBoth(3) 
        }
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "RIP version."
    ::= { ripNewCfgIntfEntry 2 }

ripNewCfgIntfSupply OBJECT-TYPE
    SYNTAX INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "Enable or disable supplying route updates."
    ::= { ripNewCfgIntfEntry 3 }

ripNewCfgIntfListen OBJECT-TYPE
    SYNTAX INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "Enable or disable listening to route updates."
    ::= { ripNewCfgIntfEntry 4 }
 

ripNewCfgIntfTrigUpdate OBJECT-TYPE
    SYNTAX INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "Enable or disable triggered updates."
    ::= { ripNewCfgIntfEntry 6 }

ripNewCfgIntfMcastUpdate OBJECT-TYPE
    SYNTAX INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "Enable or disable multicast updates."
    ::= { ripNewCfgIntfEntry 7 }

ripNewCfgIntfPoisonReverse OBJECT-TYPE
    SYNTAX INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "RIP poison reverse."
    ::= { ripNewCfgIntfEntry 8 }

ripNewCfgIntfState OBJECT-TYPE
    SYNTAX INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "Enable or disable RIP protocol."
    ::= { ripNewCfgIntfEntry 9 }

ripNewCfgIntfMetric OBJECT-TYPE
    SYNTAX  INTEGER (1..15)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "RIP route metric for this interface."
    ::= { ripNewCfgIntfEntry 10 }

ripNewCfgIntfAuth OBJECT-TYPE
    SYNTAX INTEGER {
        none(1),
        password(2)
        }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The type of Authentication used on this interface."
    ::= { ripNewCfgIntfEntry 11 }

ripNewCfgIntfKey OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..16))
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "RIP update authentication password."
    ::= { ripNewCfgIntfEntry 12 }

ripNewCfgIntfDefault OBJECT-TYPE
    SYNTAX INTEGER {
        both(1),
        listen(2),
        supply(3),
        none(4)
        }
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "Specifies what RIP does with default routes. The default routes 
         action could be set to listen/supply/both/none."
    ::= { ripNewCfgIntfEntry 13 }

ripNewCfgIntfSplitHorizon OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(2),
        disabled(3)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "RIP split horizon."
    ::= { ripNewCfgIntfEntry 14 }

ripGeneral  OBJECT IDENTIFIER ::= { rip2Cfg 3 }

rip2CurCfgState OBJECT-TYPE
    SYNTAX INTEGER {
        on(1),
        off(2)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "RIP global state."
    ::= { ripGeneral 1 }

rip2NewCfgState OBJECT-TYPE
    SYNTAX INTEGER {
        on(1),
        off(2)
        }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
    "Globally turn RIP on or off."
    ::= { ripGeneral 2 }

rip2CurCfgUpdatePeriod OBJECT-TYPE
      SYNTAX  INTEGER  (1..120)
      MAX-ACCESS  read-only
      STATUS  current
      DESCRIPTION
          "Update Period in seconds."
      ::= { ripGeneral 3 }

rip2NewCfgUpdatePeriod OBJECT-TYPE
      SYNTAX  INTEGER  (1..120)
      MAX-ACCESS  read-write
      STATUS  current
      DESCRIPTION
          "Update Period in seconds."
      ::= { ripGeneral 4 }

ripRouteRedistribution   OBJECT IDENTIFIER ::= { rip2Cfg 4 }

ripRedistributeStatic    OBJECT IDENTIFIER ::= { ripRouteRedistribution 1 }

ripCurCfgStaticMetric OBJECT-TYPE
    SYNTAX INTEGER (0..15)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The metric to be assigned to static routes. 
         A value of 0 indicates none."
    ::= { ripRedistributeStatic 1 }

ripNewCfgStaticMetric OBJECT-TYPE
    SYNTAX INTEGER (0..15)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
    "The metric to be assigned to static routes. 
         A value of 0 indicates none."
    ::= { ripRedistributeStatic 2 }

ripCurCfgStaticOutRmapList OBJECT-TYPE
    SYNTAX OCTET STRING
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The route maps present in the out route map list. 
         The route maps are presented in a bitmap format.

         in receiving order:

         OCTET 1  OCTET 2  .....
         xxxxxxxx xxxxxxxx .....
         ||    || |_ Rmap 9
         ||    ||
         ||    ||___ Rmap 8
         ||    |____ Rmap 7
         ||      .    .   .
         ||_________ Rmap 2
         |__________ Rmap 1

         where x : 1 - The represented route map is selected
         0 - The represented route map is not selected"
    ::= { ripRedistributeStatic 5 }

ripNewCfgStaticOutRmapList OBJECT-TYPE
    SYNTAX OCTET STRING
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The route maps present in the out route map list. 
         The route maps are presented in a bitmap format.

         in receiving order:

         OCTET 1  OCTET 2  .....
         xxxxxxxx xxxxxxxx .....
         ||    || |_ Rmap 9
         ||    ||
         ||    ||___ Rmap 8
         ||    |____ Rmap 7
         ||      .    .   .
         ||_________ Rmap 2
         |__________ Rmap 1

         where x : 1 - The represented route map is selected
         0 - The represented route map is not selected"
    ::= { ripRedistributeStatic 6 }

ripNewCfgStaticAddOutRmap OBJECT-TYPE
    SYNTAX Integer32 
    MAX-ACCESS read-write
    STATUS current  
    DESCRIPTION
    "The route map to be add into out-rmap list. When read, 0 is returned."
    ::= { ripRedistributeStatic 7 }

ripNewCfgStaticRemoveOutRmap OBJECT-TYPE
    SYNTAX Integer32 
    MAX-ACCESS read-write
    STATUS current  
    DESCRIPTION
    "The route map to be removed from out-rmap list. When read, 
         0 is returned."
    ::= { ripRedistributeStatic 8 }

ripRedistributeEbgp    OBJECT IDENTIFIER ::= { ripRouteRedistribution 2 }

ripCurCfgEbgpMetric OBJECT-TYPE
    SYNTAX INTEGER (0..15)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The export metric to be assigned to External BGP routes.
         A value of 0 indicates none."
    ::= { ripRedistributeEbgp 1 }

ripNewCfgEbgpMetric OBJECT-TYPE
    SYNTAX INTEGER (0..15)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
    "The export metric to be assigned to External BGP routes.
         A value of 0 indicates none."
    ::= { ripRedistributeEbgp 2 }

ripCurCfgEbgpOutRmapList OBJECT-TYPE
    SYNTAX OCTET STRING
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The route maps present in the out route map list. 
         The route maps are presented in a bitmap format.

         in receiving order:

         OCTET 1  OCTET 2  .....
         xxxxxxxx xxxxxxxx .....
         ||    || |_ Rmap 9
         ||    ||
         ||    ||___ Rmap 8
         ||    |____ Rmap 7
         ||      .    .   .
         ||_________ Rmap 2
         |__________ Rmap 1

         where x : 1 - The represented route map is selected
         0 - The represented route map is not selected"
    ::= { ripRedistributeEbgp 5 }

ripNewCfgEbgpOutRmapList OBJECT-TYPE
    SYNTAX OCTET STRING
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The route maps present in the out route map list. 
         The route maps are presented in a bitmap format.

         in receiving order:

         OCTET 1  OCTET 2  .....
         xxxxxxxx xxxxxxxx .....
         ||    || |_ Rmap 9
         ||    ||
         ||    ||___ Rmap 8
         ||    |____ Rmap 7
         ||      .    .   .
         ||_________ Rmap 2
         |__________ Rmap 1

         where x : 1 - The represented route map is selected
         0 - The represented route map is not selected"
    ::= { ripRedistributeEbgp 6 }

ripNewCfgEbgpAddOutRmap OBJECT-TYPE
    SYNTAX Integer32 
    MAX-ACCESS read-write
    STATUS current  
    DESCRIPTION
    "The route map to be add into out-rmap list. When read, 0 is returned."
    ::= { ripRedistributeEbgp 7 }

ripNewCfgEbgpRemoveOutRmap OBJECT-TYPE
    SYNTAX Integer32 
    MAX-ACCESS read-write
    STATUS current  
    DESCRIPTION
    "The route map to be removed from out-rmap list. When read, 
         0 is returned."
    ::= { ripRedistributeEbgp 8 }

ripRedistributeIbgp    OBJECT IDENTIFIER ::= { ripRouteRedistribution 3 }

ripCurCfgIbgpMetric OBJECT-TYPE
    SYNTAX INTEGER (0..15)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The export metric for Internal BGP routes.
         A value of 0 indicates none."
    ::= { ripRedistributeIbgp 1 }

ripNewCfgIbgpMetric OBJECT-TYPE
    SYNTAX INTEGER (0..15)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
    "The export metric for Internal BGP routes.
         A value of 0 indicates none."
    ::= { ripRedistributeIbgp 2 }

ripCurCfgIbgpOutRmapList OBJECT-TYPE
    SYNTAX OCTET STRING
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The route maps present in the out route map list. 
         The route maps are presented in a bitmap format.

         in receiving order:

         OCTET 1  OCTET 2  .....
         xxxxxxxx xxxxxxxx .....
         ||    || |_ Rmap 9
         ||    ||
         ||    ||___ Rmap 8
         ||    |____ Rmap 7
         ||      .    .   .
         ||_________ Rmap 2
         |__________ Rmap 1

         where x : 1 - The represented route map is selected
         0 - The represented route map is not selected"
    ::= { ripRedistributeIbgp 5 }

ripNewCfgIbgpOutRmapList OBJECT-TYPE
    SYNTAX OCTET STRING
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The route maps present in the out route map list. 
         The route maps are presented in a bitmap format.

         in receiving order:

         OCTET 1  OCTET 2  .....
         xxxxxxxx xxxxxxxx .....
         ||    || |_ Rmap 9
         ||    ||
         ||    ||___ Rmap 8
         ||    |____ Rmap 7
         ||      .    .   .
         ||_________ Rmap 2
         |__________ Rmap 1

         where x : 1 - The represented route map is selected
         0 - The represented route map is not selected"
    ::= { ripRedistributeIbgp 6 }

ripNewCfgIbgpAddOutRmap OBJECT-TYPE
    SYNTAX Integer32 
    MAX-ACCESS read-write
    STATUS current  
    DESCRIPTION
    "The route map to be add into out-rmap list. When read, 0 is returned."
    ::= { ripRedistributeIbgp 7 }

ripNewCfgIbgpRemoveOutRmap OBJECT-TYPE
    SYNTAX Integer32 
    MAX-ACCESS read-write
    STATUS current  
    DESCRIPTION
    "The route map to be removed from out-rmap list. When read, 
         0 is returned."
    ::= { ripRedistributeIbgp 8 }

ripRedistributeFixed    OBJECT IDENTIFIER ::= { ripRouteRedistribution 4 }

ripCurCfgFixedMetric OBJECT-TYPE
    SYNTAX INTEGER (0..15)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The export metric for fixed routes. A value of 0 indicates none"
    ::= { ripRedistributeFixed 1 }

ripNewCfgFixedMetric OBJECT-TYPE
    SYNTAX INTEGER (0..15)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
    "The export metric for fixed routes. A value of 0 indicates none"
    ::= { ripRedistributeFixed 2 }

ripCurCfgFixedOutRmapList OBJECT-TYPE
    SYNTAX OCTET STRING
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The route maps present in the out route map list. 
         The route maps are presented in a bitmap format.

         in receiving order:

         OCTET 1  OCTET 2  .....
         xxxxxxxx xxxxxxxx .....
         ||    || |_ Rmap 9
         ||    ||
         ||    ||___ Rmap 8
         ||    |____ Rmap 7
         ||      .    .   .
         ||_________ Rmap 2
         |__________ Rmap 1

         where x : 1 - The represented route map is selected
         0 - The represented route map is not selected"
    ::= { ripRedistributeFixed 5 }

ripNewCfgFixedOutRmapList OBJECT-TYPE
    SYNTAX OCTET STRING
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The route maps present in the out route map list. 
         The route maps are presented in a bitmap format.

         in receiving order:

         OCTET 1  OCTET 2  .....
         xxxxxxxx xxxxxxxx .....
         ||    || |_ Rmap 9
         ||    ||
         ||    ||___ Rmap 8
         ||    |____ Rmap 7
         ||      .    .   .
         ||_________ Rmap 2
         |__________ Rmap 1

         where x : 1 - The represented route map is selected
         0 - The represented route map is not selected"
    ::= { ripRedistributeFixed 6 }

ripNewCfgFixedAddOutRmap OBJECT-TYPE
    SYNTAX Integer32 
    MAX-ACCESS read-write
    STATUS current  
    DESCRIPTION
    "The route map to be add into out-rmap list. When read, 0 is returned."
    ::= { ripRedistributeFixed 7 }

ripNewCfgFixedRemoveOutRmap OBJECT-TYPE
    SYNTAX Integer32 
    MAX-ACCESS read-write
    STATUS current  
    DESCRIPTION
    "The route map to be removed from out-rmap list. When read, 
         0 is returned."
    ::= { ripRedistributeFixed 8 }

ripRedistributeOspf    OBJECT IDENTIFIER ::= { ripRouteRedistribution 5 }

ripCurCfgOspfMetric OBJECT-TYPE
    SYNTAX INTEGER (0..15)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The export metric for RIP routes. A value of 0 indicates none"
    ::= { ripRedistributeOspf 1 }

ripNewCfgOspfMetric OBJECT-TYPE
    SYNTAX INTEGER (0..15)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
    "The export metric for RIP routes. A value of 0 indicates none"
    ::= { ripRedistributeOspf 2 }

ripCurCfgOspfOutRmapList OBJECT-TYPE
    SYNTAX OCTET STRING
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The route maps present in the out route map list. 
         The route maps are presented in a bitmap format.

         in receiving order:

         OCTET 1  OCTET 2  .....
         xxxxxxxx xxxxxxxx .....
         ||    || |_ Rmap 9
         ||    ||
         ||    ||___ Rmap 8
         ||    |____ Rmap 7
         ||      .    .   .
         ||_________ Rmap 2
         |__________ Rmap 1

         where x : 1 - The represented route map is selected
         0 - The represented route map is not selected"
    ::= { ripRedistributeOspf 5 }

ripNewCfgOspfOutRmapList OBJECT-TYPE
    SYNTAX OCTET STRING
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The route maps present in the out route map list. 
         The route maps are presented in a bitmap format.

         in receiving order:

         OCTET 1  OCTET 2  .....
         xxxxxxxx xxxxxxxx .....
         ||    || |_ Rmap 9
         ||    ||
         ||    ||___ Rmap 8
         ||    |____ Rmap 7
         ||      .    .   .
         ||_________ Rmap 2
         |__________ Rmap 1

         where x : 1 - The represented route map is selected
         0 - The represented route map is not selected"
    ::= { ripRedistributeOspf 6 }

ripNewCfgOspfAddOutRmap OBJECT-TYPE
    SYNTAX Integer32 
    MAX-ACCESS read-write
    STATUS current  
    DESCRIPTION
    "The route map to be add into out-rmap list. When read, 0 is returned."
    ::= { ripRedistributeOspf 7 }

ripNewCfgOspfRemoveOutRmap OBJECT-TYPE
    SYNTAX Integer32 
    MAX-ACCESS read-write
    STATUS current  
    DESCRIPTION
    "The route map to be removed from out-rmap list. When read, 
         0 is returned."
    ::= { ripRedistributeOspf 8 }

ripRedistributeEospf    OBJECT IDENTIFIER ::= { ripRouteRedistribution 6 }

ripCurCfgEospfMetric OBJECT-TYPE
    SYNTAX INTEGER (0..15)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The export metric for RIP routes. A value of 0 indicates none"
    ::= { ripRedistributeEospf 1 }

ripNewCfgEospfMetric OBJECT-TYPE
    SYNTAX INTEGER (0..15)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
    "The export metric for RIP routes. A value of 0 indicates none"
    ::= { ripRedistributeEospf 2 }

ripCurCfgEospfOutRmapList OBJECT-TYPE
    SYNTAX OCTET STRING
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The route maps present in the out route map list. 
         The route maps are presented in a bitmap format.

         in receiving order:

         OCTET 1  OCTET 2  .....
         xxxxxxxx xxxxxxxx .....
         ||    || |_ Rmap 9
         ||    ||
         ||    ||___ Rmap 8
         ||    |____ Rmap 7
         ||      .    .   .
         ||_________ Rmap 2
         |__________ Rmap 1

         where x : 1 - The represented route map is selected
         0 - The represented route map is not selected"
    ::= { ripRedistributeEospf 5 }

ripNewCfgEospfOutRmapList OBJECT-TYPE
    SYNTAX OCTET STRING
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The route maps present in the out route map list. 
         The route maps are presented in a bitmap format.

         in receiving order:

         OCTET 1  OCTET 2  .....
         xxxxxxxx xxxxxxxx .....
         ||    || |_ Rmap 9
         ||    ||
         ||    ||___ Rmap 8
         ||    |____ Rmap 7
         ||      .    .   .
         ||_________ Rmap 2
         |__________ Rmap 1

         where x : 1 - The represented route map is selected
         0 - The represented route map is not selected"
    ::= { ripRedistributeEospf 6 }

ripNewCfgEospfAddOutRmap OBJECT-TYPE
    SYNTAX Integer32 
    MAX-ACCESS read-write
    STATUS current  
    DESCRIPTION
    "The route map to be add into out-rmap list. When read, 0 is returned."
    ::= { ripRedistributeEospf 7 }

ripNewCfgEospfRemoveOutRmap OBJECT-TYPE
    SYNTAX Integer32 
    MAX-ACCESS read-write
    STATUS current  
    DESCRIPTION
    "The route map to be removed from out-rmap list. When read, 
         0 is returned."
    ::= { ripRedistributeEospf 8 }


-- IP Forwarding Configuration 

ipFwdGeneralCfg   OBJECT IDENTIFIER ::=  {ipForwardCfg 1 }

ipFwdCurCfgState OBJECT-TYPE
    SYNTAX  INTEGER {
        on(2),
        off(3)
    }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "IP forwarding global state."
    ::= { ipFwdGeneralCfg 1 }

ipFwdNewCfgState OBJECT-TYPE
    SYNTAX  INTEGER { 
        on(2),
        off(3) 
    }
    MAX-ACCESS  read-write
    STATUS  current  
    DESCRIPTION 
        "IP forwarding global state." 
    ::= { ipFwdGeneralCfg 2 }

ipFwdCurCfgDirectedBcast OBJECT-TYPE
    SYNTAX INTEGER {
        enabled(2),
        disabled(3)
    }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Enable or disable forwarding directed broadcasts."
    ::= { ipFwdGeneralCfg 3 }

ipFwdNewCfgDirectedBcast OBJECT-TYPE
    SYNTAX INTEGER {
        enabled(2),
        disabled(3)
    }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Enable or disable forwarding directed broadcasts."
    ::= { ipFwdGeneralCfg 4 }


ipFwdCurCfgICMP6Redirect OBJECT-TYPE
    SYNTAX INTEGER {
        enabled(2),
        disabled(3)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Enable or disable ICMPv6 redirects."
    ::= { ipFwdGeneralCfg 7 }

ipFwdNewCfgICMP6Redirect OBJECT-TYPE
    SYNTAX INTEGER {
        enabled(2),
        disabled(3)
        }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Enable or disable ICMPv6 redirects."
    ::= { ipFwdGeneralCfg 8 }


--
-- ARP configuration
--
arpCurCfgReARPPeriod OBJECT-TYPE
    SYNTAX INTEGER (2..120)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Re-ARP Period in seconds."
    ::= { arpCfg 1 }

arpNewCfgReARPPeriod OBJECT-TYPE 
    SYNTAX  INTEGER (2..120)
    MAX-ACCESS  read-write
    STATUS  current 
    DESCRIPTION 
        "Re-ARP Period in seconds." 
    ::= { arpCfg 2 }


--
-- IP Bootp Configration
--

ipCurCfgBootpAddr OBJECT-TYPE
    SYNTAX  IpAddress
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The IP address of BOOTP server."
    ::= { ipBootpCfg 1 }

ipNewCfgBootpAddr OBJECT-TYPE
    SYNTAX  IpAddress
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The IP address of BOOTP server."
    ::= { ipBootpCfg 2 }

ipCurCfgBootpAddr2 OBJECT-TYPE
    SYNTAX  IpAddress
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The IP address of second BOOTP server."
    ::= { ipBootpCfg 3 }

ipNewCfgBootpAddr2 OBJECT-TYPE
    SYNTAX  IpAddress
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The IP address of second BOOTP server."
    ::= { ipBootpCfg 4 }

ipCurCfgBootpState OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(2),
        disabled(3)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The state of BOOTP relay."
    ::= { ipBootpCfg 5 }

ipNewCfgBootpState OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(2),
        disabled(3)
        }
    MAX-ACCESS  read-write  
    STATUS  current
    DESCRIPTION
        "The state of BOOTP relay."
    ::= { ipBootpCfg 6 }


ipCurCfgBootpGlobalServerTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF IpCurCfgBootpGlobalServerEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table of global BOOTP server addresses"
    ::= { ipBootpCfg 20 }

ipCurCfgBootpGlobalServerEntry OBJECT-TYPE
    SYNTAX  IpCurCfgBootpGlobalServerEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A row in the ipCurCfgBootpGlobalServerAddrTable"
    INDEX   { ipCurCfgBootpGlobalServerIndex }
    ::= { ipCurCfgBootpGlobalServerTable 1 }

IpCurCfgBootpGlobalServerEntry ::= SEQUENCE {
    ipCurCfgBootpGlobalServerIndex Integer32,
    ipCurCfgBootpGlobalServerAddress    IpAddress
    }

ipCurCfgBootpGlobalServerIndex OBJECT-TYPE
    SYNTAX  Integer32 
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The index of ipCurCfgBootpGlobalServerTable"
    ::= { ipCurCfgBootpGlobalServerEntry  1 }

ipCurCfgBootpGlobalServerAddress OBJECT-TYPE
    SYNTAX  IpAddress
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The current global server IP."
    ::= { ipCurCfgBootpGlobalServerEntry 2 }

ipNewCfgBootpGlobalServerTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF IpNewCfgBootpGlobalServerEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table of global BOOTP server addresses"
    ::= { ipBootpCfg 21 }

ipNewCfgBootpGlobalServerEntry OBJECT-TYPE
    SYNTAX  IpNewCfgBootpGlobalServerEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A row in the ipNewCfgBootpGlobalServerAddrTable"
    INDEX   { ipNewCfgBootpGlobalServerIndex }
    ::= { ipNewCfgBootpGlobalServerTable 1 }

IpNewCfgBootpGlobalServerEntry ::= SEQUENCE {
    ipNewCfgBootpGlobalServerIndex Integer32,
    ipNewCfgBootpGlobalServerAddress    IpAddress
    }

ipNewCfgBootpGlobalServerIndex OBJECT-TYPE
    SYNTAX  Integer32 
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The index of ipCurCfgBootpGlobalServerTable"
    ::= { ipNewCfgBootpGlobalServerEntry  1 }

ipNewCfgBootpGlobalServerAddress OBJECT-TYPE
    SYNTAX  IpAddress
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The current global server IP."
    ::= { ipNewCfgBootpGlobalServerEntry 2 }

ipCurCfgBootpBcastDomainTable OBJECT-TYPE
     SYNTAX  SEQUENCE OF IpCurCfgBootpBcastDomainEntry
     MAX-ACCESS  not-accessible
     STATUS  current
     DESCRIPTION
        "The table of broadcast domain settings"
     ::= { ipBootpCfg 22 }

ipCurCfgBootpBcastDomainEntry OBJECT-TYPE
    SYNTAX  IpCurCfgBootpBcastDomainEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A row in the broadcast domain table"
    INDEX   { ipCurCfgBootpBcastDomainIndex }
    ::= { ipCurCfgBootpBcastDomainTable 1 }

IpCurCfgBootpBcastDomainEntry ::= SEQUENCE {
    ipCurCfgBootpBcastDomainIndex Integer32,
    ipCurCfgBootpBcastDomainVlan        Integer32,
    ipCurCfgBootpBcastDomainEnable      INTEGER 
    }

ipCurCfgBootpBcastDomainIndex OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The index of the broadcast domain entry"
    ::= { ipCurCfgBootpBcastDomainEntry 1 }

ipCurCfgBootpBcastDomainVlan OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The VLAN of the broadcast domain entry"
    ::= { ipCurCfgBootpBcastDomainEntry 2 }

ipCurCfgBootpBcastDomainEnable OBJECT-TYPE
    SYNTAX  INTEGER {
    enabled(2),
    disabled(3)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The state of the broadcast domain entry"
    ::= { ipCurCfgBootpBcastDomainEntry 3 }

ipNewCfgBootpBcastDomainTable OBJECT-TYPE
     SYNTAX  SEQUENCE OF IpNewCfgBootpBcastDomainEntry
     MAX-ACCESS  not-accessible
     STATUS  current
     DESCRIPTION
        "The table of broadcast domain settings"
     ::= { ipBootpCfg 23 }

ipNewCfgBootpBcastDomainEntry OBJECT-TYPE
    SYNTAX  IpNewCfgBootpBcastDomainEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A row in the broadcast domain table"
    INDEX   { ipNewCfgBootpBcastDomainIndex }
    ::= { ipNewCfgBootpBcastDomainTable 1 }

IpNewCfgBootpBcastDomainEntry ::= SEQUENCE {
    ipNewCfgBootpBcastDomainIndex Integer32,
    ipNewCfgBootpBcastDomainVlan        Integer32,
    ipNewCfgBootpBcastDomainEnable      INTEGER, 
    ipNewCfgBootpBcastDomainAction      INTEGER
    }

ipNewCfgBootpBcastDomainIndex OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The index of the broadcast domain entry"
    ::= { ipNewCfgBootpBcastDomainEntry 1 }

ipNewCfgBootpBcastDomainVlan OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The VLAN of the broadcast domain entry"
    ::= { ipNewCfgBootpBcastDomainEntry 2 }

ipNewCfgBootpBcastDomainEnable OBJECT-TYPE
    SYNTAX  INTEGER {
    enabled(2),
    disabled(3)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The state of the broadcast domain entry"
    ::= { ipNewCfgBootpBcastDomainEntry 3 }

ipNewCfgBootpBcastDomainAction OBJECT-TYPE
    SYNTAX  INTEGER {
    other(1),
    delete(2)
        }
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "When set to the value of 2 (delete), the broadcast domain is deleted. 
     When read, other is returned. Setting the value to anything other 
     than 2(delete) has no effect on the state of broadcast domain."
    ::= { ipNewCfgBootpBcastDomainEntry 4 }

ipCurCfgBootpBcastDomainServerTable OBJECT-TYPE
     SYNTAX  SEQUENCE OF IpCurCfgBootpBcastDomainServerEntry
     MAX-ACCESS  not-accessible
     STATUS  current
     DESCRIPTION
        "The table of broadcast domain servers"
     ::= { ipBootpCfg 24 }

ipCurCfgBootpBcastDomainServerEntry OBJECT-TYPE
    SYNTAX  IpCurCfgBootpBcastDomainServerEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A row in the broadcast domain server table"
    INDEX   { ipCurCfgBootpBcastDomainBDIndex,
              ipCurCfgBootpBcastDomainServIndex  }
    ::= { ipCurCfgBootpBcastDomainServerTable 1 }

IpCurCfgBootpBcastDomainServerEntry ::= SEQUENCE {
    ipCurCfgBootpBcastDomainBDIndex    Integer32,
    ipCurCfgBootpBcastDomainServIndex        Integer32,
    ipCurCfgBootpBcastDomainServerIP      IpAddress 
    }

ipCurCfgBootpBcastDomainBDIndex OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The index of the broadcast domain entry in the server table"
    ::= { ipCurCfgBootpBcastDomainServerEntry 1 }

ipCurCfgBootpBcastDomainServIndex OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The index of the server in the server table"
    ::= { ipCurCfgBootpBcastDomainServerEntry 2 }

ipCurCfgBootpBcastDomainServerIP OBJECT-TYPE
    SYNTAX  IpAddress
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The current broadcast domain server IP."
    ::= { ipCurCfgBootpBcastDomainServerEntry 3 }

ipNewCfgBootpBcastDomainServerTable OBJECT-TYPE
     SYNTAX  SEQUENCE OF IpNewCfgBootpBcastDomainServerEntry
     MAX-ACCESS  not-accessible
     STATUS  current
     DESCRIPTION
        "The table of broadcast domain servers"
     ::= { ipBootpCfg 25 }

ipNewCfgBootpBcastDomainServerEntry OBJECT-TYPE
    SYNTAX  IpNewCfgBootpBcastDomainServerEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A row in the broadcast domain server table"
    INDEX   { ipNewCfgBootpBcastDomainBDIndex,
              ipNewCfgBootpBcastDomainServIndex  }
    ::= { ipNewCfgBootpBcastDomainServerTable 1 }

IpNewCfgBootpBcastDomainServerEntry ::= SEQUENCE {
    ipNewCfgBootpBcastDomainBDIndex    Integer32,
    ipNewCfgBootpBcastDomainServIndex        Integer32,
    ipNewCfgBootpBcastDomainServerIP      IpAddress 
    }

ipNewCfgBootpBcastDomainBDIndex OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The index of the broadcast domain entry in the server table"
    ::= { ipNewCfgBootpBcastDomainServerEntry 1 }

ipNewCfgBootpBcastDomainServIndex OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The index of the server in the server table"
    ::= { ipNewCfgBootpBcastDomainServerEntry 2 }

ipNewCfgBootpBcastDomainServerIP OBJECT-TYPE
    SYNTAX  IpAddress
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The current broadcast domain server IP."
    ::= { ipNewCfgBootpBcastDomainServerEntry 3 }


ipCurCfgBootpOpt82State OBJECT-TYPE
     SYNTAX  INTEGER {
        enabled(2),
        disabled(3)
     }
     MAX-ACCESS  read-only
     STATUS  current
     DESCRIPTION
        "The state of Bootp relay option 82"
     ::= { ipBootpCfg 26 }
     
ipNewCfgBootpOpt82State OBJECT-TYPE
     SYNTAX  INTEGER {
        enabled(2),
        disabled(3)
     }
     MAX-ACCESS  read-write
     STATUS  current
     DESCRIPTION
        "Set the stare of Bootp relay option 82"
     ::= { ipBootpCfg 27 }
     
ipCurCfgBootpOpt82Policy OBJECT-TYPE
    SYNTAX  INTEGER {
        replace(0),
        drop(1),
        keep(2)
     }
     MAX-ACCESS  read-only
     STATUS  current
     DESCRIPTION
        "The policy of Bootp relay option 82"
     ::= { ipBootpCfg 28 }

ipNewCfgBootpOpt82Policy OBJECT-TYPE
    SYNTAX  INTEGER {
        replace(0),
        drop(1),
        keep(2)
     }
     MAX-ACCESS  read-write
     STATUS  current
     DESCRIPTION
        "Set the policy of Bootp relay option 82"
     ::= { ipBootpCfg 29 }
    



-- VRRP (Virtual Router Redundantcy Protocol) Group

vrrpGeneral       OBJECT IDENTIFIER ::= { vrrpCfg 1 }

vrrpCurCfgGenState OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable VRRP operation globally."
    ::= { vrrpGeneral 1 }

vrrpNewCfgGenState OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable or disable VRRP operation globally."
    ::= { vrrpGeneral 2 }

vrrpCurCfgGenTckVirtRtrInc OBJECT-TYPE
    SYNTAX  INTEGER (0..254)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The increment of VRRP virtual router priority. The priority is 
         adjusted by tracking the state of other virtual routers."
    ::= { vrrpGeneral 3 }

vrrpNewCfgGenTckVirtRtrInc OBJECT-TYPE
    SYNTAX  INTEGER (0..254)
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The increment of VRRP virtual router priority. The priority is 
         adjusted by tracking the state of other virtual routers."
    ::= { vrrpGeneral 4 }

vrrpCurCfgGenTckIpIntfInc OBJECT-TYPE
    SYNTAX  INTEGER (0..254)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The increment of VRRP virtual router priority. The priority is 
         adjusted by tracking the state of other router interfaces."
    ::= { vrrpGeneral 5 }

vrrpNewCfgGenTckIpIntfInc OBJECT-TYPE
    SYNTAX  INTEGER (0..254)
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The increment of VRRP virtual router priority. The priority is 
         adjusted by tracking the state of other router interfaces."
    ::= { vrrpGeneral 6 }

vrrpCurCfgGenTckVlanPortInc OBJECT-TYPE
    SYNTAX  INTEGER (0..254)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The increment of VRRP virtual router priority. The priority is 
         adjusted by tracking the port state of ports that belongs to the 
         same virtual LAN as the virtual router."
    ::= { vrrpGeneral 7 }

vrrpNewCfgGenTckVlanPortInc OBJECT-TYPE
    SYNTAX  INTEGER (0..254)
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The increment of VRRP virtual router priority. The priority is 
         adjusted by tracking the port state of ports that belongs to the 
         same virtual LAN as the virtual router."
    ::= { vrrpGeneral 8 }




vrrpCurCfgGenHoldoff OBJECT-TYPE
        SYNTAX  INTEGER (0..255)
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
                "The time for VRRP virtual router to hold before it 
                 begins to change state to backup or master state."
        ::= { vrrpGeneral 19 }

vrrpNewCfgGenHoldoff OBJECT-TYPE
        SYNTAX  INTEGER (0..255)
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
                "The time for VRRP virtual router to hold before it 
                 begins to change state to backup or master state."
        ::= { vrrpGeneral 20 }


vrrpVirtRtrTableMaxSize OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The maximum number of entries in VRRP virtual router table."
    ::= { vrrpCfg 2 }

vrrpCurCfgVirtRtrTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF VrrpCurCfgVirtRtrTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table of VRRP virtual routers in the current configuration block."
    ::= { vrrpCfg 3 }
 
vrrpCurCfgVirtRtrTableEntry OBJECT-TYPE
    SYNTAX  VrrpCurCfgVirtRtrTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "Information about a VRRP virtual router."
    INDEX   { vrrpCurCfgVirtRtrIndx }
    ::= { vrrpCurCfgVirtRtrTable 1 }
 
VrrpCurCfgVirtRtrTableEntry ::= SEQUENCE {
    vrrpCurCfgVirtRtrIndx         Integer32,
    vrrpCurCfgVirtRtrID           INTEGER,
    vrrpCurCfgVirtRtrAddr         IpAddress,
    vrrpCurCfgVirtRtrIfIndex      Integer32,
    vrrpCurCfgVirtRtrInterval     INTEGER,
    vrrpCurCfgVirtRtrPreDelay     INTEGER,
    vrrpCurCfgVirtRtrPriority     INTEGER,
    vrrpCurCfgVirtRtrPreempt      INTEGER,
    vrrpCurCfgVirtRtrTckVirtRtr   INTEGER,
    vrrpCurCfgVirtRtrTckIpIntf    INTEGER,
    vrrpCurCfgVirtRtrTckVlanPort  INTEGER,
    vrrpCurCfgVirtRtrState        INTEGER
    , vrrpCurCfgVirtRtrFastAdvertisement INTEGER
    }

vrrpCurCfgVirtRtrIndx OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The VRRP virtual router table index."
    ::= { vrrpCurCfgVirtRtrTableEntry 1 }

vrrpCurCfgVirtRtrID OBJECT-TYPE
    SYNTAX  INTEGER (1..255)
    MAX-ACCESS  read-only
    STATUS  current 
    DESCRIPTION
        "The VRRP virtual router identifier."
    ::= { vrrpCurCfgVirtRtrTableEntry 2 }

vrrpCurCfgVirtRtrAddr OBJECT-TYPE
    SYNTAX  IpAddress
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The VRRP virtual router IP address."
    ::= { vrrpCurCfgVirtRtrTableEntry 3 }

vrrpCurCfgVirtRtrIfIndex OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The IfIndex that the VRRP virtual router is representing."
    ::= { vrrpCurCfgVirtRtrTableEntry 4 }

vrrpCurCfgVirtRtrInterval OBJECT-TYPE
    SYNTAX  INTEGER (1..255)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The time interval between VRRP advertisements in seconds.
    When FAST_ADVERTISEMENT is enabled, this object indicates advertisement
    interval in centi-seconds"
    ::= { vrrpCurCfgVirtRtrTableEntry 5 }

vrrpCurCfgVirtRtrPriority OBJECT-TYPE
    SYNTAX  INTEGER (1..254)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The priority value to be used by the specified VRRP virtual routers."
    ::= { vrrpCurCfgVirtRtrTableEntry 6 }

vrrpCurCfgVirtRtrPreempt OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "This is for controlling whether a higher priority Backup
          VRRP virtual router preempts a low priority Master.

          enabled(1)  - allow preemption
          disabled(2) - prohibit preemption"
    ::= { vrrpCurCfgVirtRtrTableEntry 7 }


vrrpCurCfgVirtRtrTckVirtRtr OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable tracking other virtual routers for priority 
         adjustment. The priority increment is defined 
         in vrrpCurCfgGenTckVirtRtrInc."
    ::= { vrrpCurCfgVirtRtrTableEntry 9 }

vrrpCurCfgVirtRtrTckIpIntf OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable tracking other router interfaces for 
     priority adjustment. The priority increment is defined 
     in vrrpCurCfgGenTckIpIntfInc."
    ::= { vrrpCurCfgVirtRtrTableEntry 10 }



vrrpCurCfgVirtRtrTckVlanPort OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable tracking port state of VLAN ports 
     for priority adjustment. The priority increment is 
     defined in vrrpCurCfgGenTckVlanPortInc."
    ::= { vrrpCurCfgVirtRtrTableEntry 15 }


vrrpCurCfgVirtRtrState OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable the VRRP virtual router."
    ::= { vrrpCurCfgVirtRtrTableEntry 16 }

vrrpCurCfgVirtRtrFastAdvertisement OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS read-only 
    STATUS  current
    DESCRIPTION
        "This object provides the status of FAST_ADVERTISEMENT.
         When FAST_ADVERTISEMENT is enabled, 
           - New message type FAST_ADVERTISEMENT(2) will be used in the
         VRRP advertisements
           - Can interop only with another FAST_ADVERTISEMENT enabled router
           - VRRP advertisement interval will be sent in units of centi-seconds
           - Timers will be running with centi-second granularity"
    ::= { vrrpCurCfgVirtRtrTableEntry 17 }

vrrpCurCfgVirtRtrPreDelay OBJECT-TYPE
    SYNTAX  INTEGER (0..255)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The pre-emptive delay interval in seconds."
    ::= { vrrpCurCfgVirtRtrTableEntry 18 }

vrrpNewCfgVirtRtrTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF VrrpNewCfgVirtRtrTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table of VRRP virtual routers in the current configuration block."
    ::= { vrrpCfg 4 }

vrrpNewCfgVirtRtrTableEntry OBJECT-TYPE
    SYNTAX  VrrpNewCfgVirtRtrTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "Information about a VRRP virtual router."
    INDEX   { vrrpNewCfgVirtRtrIndx }
    ::= { vrrpNewCfgVirtRtrTable 1 }

VrrpNewCfgVirtRtrTableEntry ::= SEQUENCE {
    vrrpNewCfgVirtRtrIndx         Integer32,
    vrrpNewCfgVirtRtrID           INTEGER,
    vrrpNewCfgVirtRtrAddr         IpAddress,
    vrrpNewCfgVirtRtrIfIndex      Integer32,
    vrrpNewCfgVirtRtrInterval     INTEGER,
    vrrpNewCfgVirtRtrPreDelay     INTEGER,
    vrrpNewCfgVirtRtrPriority     INTEGER,
    vrrpNewCfgVirtRtrPreempt      INTEGER,
    vrrpNewCfgVirtRtrDelete       INTEGER,
    vrrpNewCfgVirtRtrTckVirtRtr   INTEGER,
    vrrpNewCfgVirtRtrTckIpIntf    INTEGER,
    vrrpNewCfgVirtRtrTckVlanPort  INTEGER,
    vrrpNewCfgVirtRtrState        INTEGER
    , vrrpNewCfgVirtRtrFastAdvertisement INTEGER
    }

vrrpNewCfgVirtRtrIndx OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The VRRP virtual router table index."
    ::= { vrrpNewCfgVirtRtrTableEntry 1 }

vrrpNewCfgVirtRtrID OBJECT-TYPE
    SYNTAX  INTEGER (1..255)
    MAX-ACCESS  read-create
    STATUS  current 
    DESCRIPTION
        "The VRRP virtual router identifier."
    ::= { vrrpNewCfgVirtRtrTableEntry 2 }

vrrpNewCfgVirtRtrAddr OBJECT-TYPE
    SYNTAX  IpAddress
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "The VRRP virtual router IP address."
    ::= { vrrpNewCfgVirtRtrTableEntry 3 }

vrrpNewCfgVirtRtrIfIndex OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "The IfIndex that the VRRP virtual router is representing."
   ::= { vrrpNewCfgVirtRtrTableEntry 4 }

vrrpNewCfgVirtRtrInterval OBJECT-TYPE
    SYNTAX  INTEGER (1..255)
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "The time interval between VRRP advertisements in seconds.
    When FAST_ADVERTISEMENT is enabled, this object indicates advertisement
    interval in centi-seconds"
    ::= { vrrpNewCfgVirtRtrTableEntry 5 }

vrrpNewCfgVirtRtrPriority OBJECT-TYPE
    SYNTAX  INTEGER (1..254)
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "The priority value to be used by the specified VRRP virtual router."
    ::= { vrrpNewCfgVirtRtrTableEntry 6 }

vrrpNewCfgVirtRtrPreempt OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "This is for controlling whether a higher priority Backup
         VRRP virtual router preempts a low priority Master.

         enabled(1)  - allow preemption
         disabled(2) - prohibit preemption"
    ::= { vrrpNewCfgVirtRtrTableEntry 7 }


vrrpNewCfgVirtRtrDelete OBJECT-TYPE
    SYNTAX  INTEGER { 
    other(1),
        delete(2)
    }
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "When set to the value of 2 (delete), the entire row is deleted. 
         When read, other(1) is returned. Setting the value to anything 
         other than delete(2) has no effect on the state of the row."
    ::= { vrrpNewCfgVirtRtrTableEntry 8 }


vrrpNewCfgVirtRtrTckVirtRtr OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "Enable or disable tracking other virtual routers for 
     priority adjustment.  the priority increment is defined 
     in vrrpNewCfgGenTckVirtRtrInc."
    ::= { vrrpNewCfgVirtRtrTableEntry 10 }

vrrpNewCfgVirtRtrTckIpIntf OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
     MAX-ACCESS  read-create
     STATUS  current
     DESCRIPTION
         "Enable or disable tracking other router interfaces for 
      priority adjustment.  the priority increment is defined 
      in vrrpNewCfgGenTckIpIntfInc."
    ::= { vrrpNewCfgVirtRtrTableEntry 11 }

vrrpNewCfgVirtRtrTckVlanPort OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "Enable or disable tracking port state of VLAN ports 
     for priority adjustment.  the priority increment is 
     defined in vrrpNewCfgGenTckVlanPortInc."
    ::= { vrrpNewCfgVirtRtrTableEntry 12 }


vrrpNewCfgVirtRtrState OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "Enable or disable the VRRP virtual router."
    ::= { vrrpNewCfgVirtRtrTableEntry 17 }
    
vrrpNewCfgVirtRtrFastAdvertisement OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "This object can be enabled if sub-second advertisement interval is required.
         When FAST_ADVERTISEMENT is enabled, 
           - New message type FAST_ADVERTISEMENT(2) will be used in the
         VRRP advertisements
           - Can interop only with another FAST_ADVERTISEMENT enabled router
           - VRRP advertisement interval will be sent in units of centi-seconds
           - Timers will be running with centi-second granularity"
         
    DEFVAL    { disabled }
    ::= { vrrpNewCfgVirtRtrTableEntry 18 }

vrrpNewCfgVirtRtrPreDelay OBJECT-TYPE
    SYNTAX  INTEGER (0..255)
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "The pre-emptive delay interval in seconds."
    ::= { vrrpNewCfgVirtRtrTableEntry 19 }
-- VRRP Interface Table

vrrpIfTableMaxSize OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The maximum number of entries in VRRP interface table."
    ::= { vrrpCfg 5 }

vrrpCurCfgIfTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF VrrpCurCfgIfTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table of VRRP interface in the current configuration block."
    ::= { vrrpCfg 6 }
 
vrrpCurCfgIfTableEntry OBJECT-TYPE
    SYNTAX  VrrpCurCfgIfTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "Information about a VRRP interface."
    INDEX   { vrrpCurCfgIfIndx }
    ::= { vrrpCurCfgIfTable 1 }
 
VrrpCurCfgIfTableEntry ::= SEQUENCE {
    vrrpCurCfgIfIndx         Integer32,
    vrrpCurCfgIfAuthType     INTEGER,
    vrrpCurCfgIfPasswd       DisplayString
    }

vrrpCurCfgIfIndx OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The VRRP interface index.  This is eqivalent to IfIndex."
    ::= { vrrpCurCfgIfTableEntry 1 }

vrrpCurCfgIfAuthType OBJECT-TYPE
    SYNTAX  INTEGER {
        none(1),
        simple-text-password(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Type of authentication being used.
     none(1) - no authentication
     simple-text-password(2) - use password specified in 
         vrrpCurCfgIfPasswd for authentication."
    ::= { vrrpCurCfgIfTableEntry 2 }

vrrpCurCfgIfPasswd OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..7))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The password for authentication."
    ::= { vrrpCurCfgIfTableEntry 3 }

vrrpNewCfgIfTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF VrrpNewCfgIfTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table of VRRP interface in the current configuration block."
    ::= { vrrpCfg 7 }
 
vrrpNewCfgIfTableEntry OBJECT-TYPE
    SYNTAX  VrrpNewCfgIfTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "Information about a VRRP interface."
    INDEX   { vrrpNewCfgIfIndx }
    ::= { vrrpNewCfgIfTable 1 }
 
VrrpNewCfgIfTableEntry ::= SEQUENCE {
    vrrpNewCfgIfIndx         Integer32,
    vrrpNewCfgIfAuthType     INTEGER,
    vrrpNewCfgIfPasswd       DisplayString,
    vrrpNewCfgIfDelete       INTEGER
    }

vrrpNewCfgIfIndx OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The VRRP interface index.  This is eqivalent to IfIndex."
    ::= { vrrpNewCfgIfTableEntry 1 }

vrrpNewCfgIfAuthType OBJECT-TYPE
    SYNTAX  INTEGER {
        none(1),
        simple-text-password(2)
        }
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "Type of authentication being used.
     none(1) - no authentication
     simple-text-password(2) - use password specified in 
         vrrpNewCfgIfPasswd for authentication."
    ::= { vrrpNewCfgIfTableEntry 2 }

vrrpNewCfgIfPasswd OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..8))
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "The password for authentication."
    ::= { vrrpNewCfgIfTableEntry 3 }

vrrpNewCfgIfDelete OBJECT-TYPE
    SYNTAX  INTEGER {
        other(1),
        delete(2)
        }
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "When set to the value of 2 (delete), the entire row is deleted. 
         When read, other(1) is returned. Setting the value to anything 
         other than delete(2) has no effect on the state of the row."
    ::= { vrrpNewCfgIfTableEntry 4 }

-- Failover Virtual Router Groups
vrrpVirtRtrGrpTableMaxSize OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The maximum number of entries in VRRP Group table."
    ::= { vrrpCfg 8 }

vrrpCurCfgVirtRtrGrpTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF VrrpCurCfgVirtRtrGrpTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table of VRRP virtual router group in the current configuration block."
    ::= { vrrpCfg 9 }

vrrpCurCfgVirtRtrGrpTableEntry OBJECT-TYPE
    SYNTAX  VrrpCurCfgVirtRtrGrpTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "Information about a VRRP failover virtual router."
    INDEX   { vrrpCurCfgVirtRtrGrpIndx }
    ::= { vrrpCurCfgVirtRtrGrpTable 1 }

VrrpCurCfgVirtRtrGrpTableEntry ::= SEQUENCE {
    vrrpCurCfgVirtRtrGrpIndx                Integer32,
    vrrpCurCfgVirtRtrGrpID                  INTEGER,
    vrrpCurCfgVirtRtrGrpIfIndex             Integer32,
    vrrpCurCfgVirtRtrGrpInterval            INTEGER,
    vrrpCurCfgVirtRtrGrpPriority            INTEGER,
    vrrpCurCfgVirtRtrGrpPreempt             INTEGER,
    vrrpCurCfgVirtRtrGrpState               INTEGER,
    vrrpCurCfgVirtRtrGrpTckIpIntf           INTEGER,
    vrrpCurCfgVirtRtrGrpTckVlanPort         INTEGER
   ,vrrpCurCfgVirtRtrGrpFastAdvertisement   INTEGER
    ,vrrpCurCfgVirtRtrGrpPredelay           INTEGER
    }
 
vrrpCurCfgVirtRtrGrpIndx OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The VRRP virtual router table index."
    ::= { vrrpCurCfgVirtRtrGrpTableEntry 1 }
 
vrrpCurCfgVirtRtrGrpID OBJECT-TYPE
    SYNTAX  INTEGER (1..255)
    MAX-ACCESS  read-only
    STATUS  current 
    DESCRIPTION
        "The VRRP virtual router identifier."
    ::= { vrrpCurCfgVirtRtrGrpTableEntry 2 }
 
vrrpCurCfgVirtRtrGrpIfIndex OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The IfIndex that the VRRP virtual router is representing."
    ::= { vrrpCurCfgVirtRtrGrpTableEntry 3 }

vrrpCurCfgVirtRtrGrpInterval OBJECT-TYPE
    SYNTAX  INTEGER (1..255)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The time interval between VRRP advertisements in seconds."
    ::= { vrrpCurCfgVirtRtrGrpTableEntry 4 }

vrrpCurCfgVirtRtrGrpPriority OBJECT-TYPE
    SYNTAX  INTEGER (1..254)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The priority value to be used by the specified VRRP virtual routers."
    ::= { vrrpCurCfgVirtRtrGrpTableEntry 5 }

vrrpCurCfgVirtRtrGrpPreempt OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "This is for controlling whether a higher priority Backup
         VRRP virtual router preempts a low priority Master.

         enabled(1)  - allow preemption
         disabled(2) - prohibit preemption"
   ::= { vrrpCurCfgVirtRtrGrpTableEntry 6 }

vrrpCurCfgVirtRtrGrpState OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable the VRRP virtual router."
    ::= { vrrpCurCfgVirtRtrGrpTableEntry 7 }



vrrpCurCfgVirtRtrGrpTckIpIntf OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable tracking other router interfaces for
         priority adjustment.  the priority increment is defined
         in vrrpCurCfgGenTckIpIntfInc."
    ::= { vrrpCurCfgVirtRtrGrpTableEntry 10 }

vrrpCurCfgVirtRtrGrpTckVlanPort OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable tracking port state of VLAN ports
         for priority adjustment.  the priority increment is
         defined in vrrpCurCfgGenTckVlanPortInc."
    ::= { vrrpCurCfgVirtRtrGrpTableEntry 11 }


vrrpCurCfgVirtRtrGrpFastAdvertisement OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS read-only 
    STATUS  current
    DESCRIPTION
        "This object provides the status of FAST_ADVERTISEMENT.
         When FAST_ADVERTISEMENT is enabled, 
           - New message type FAST_ADVERTISEMENT(2) will be used in the
         VRRP advertisements
           - Can interop only with another FAST_ADVERTISEMENT enabled router
           - VRRP advertisement interval will be sent in units of centi-seconds
           - Timers will be running with centi-second granularity"
    ::= { vrrpCurCfgVirtRtrGrpTableEntry 16 }




vrrpCurCfgVirtRtrGrpPredelay OBJECT-TYPE
    SYNTAX  INTEGER (1..255)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The pre-emptive delay interval in seconds for specified VRRP virtual routers."
    ::= { vrrpCurCfgVirtRtrGrpTableEntry 21 }


vrrpNewCfgVirtRtrGrpTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF VrrpNewCfgVirtRtrGrpTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table of VRRP virtual router group in the new configuration block."
    ::= { vrrpCfg 10 }

vrrpNewCfgVirtRtrGrpTableEntry OBJECT-TYPE
    SYNTAX  VrrpNewCfgVirtRtrGrpTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "Information about a VRRP failover virtual router."
    INDEX   { vrrpNewCfgVirtRtrGrpIndx }
    ::= { vrrpNewCfgVirtRtrGrpTable 1 }
 
VrrpNewCfgVirtRtrGrpTableEntry ::= SEQUENCE {
    vrrpNewCfgVirtRtrGrpIndx                Integer32,
    vrrpNewCfgVirtRtrGrpID                  INTEGER,
    vrrpNewCfgVirtRtrGrpIfIndex             Integer32,
    vrrpNewCfgVirtRtrGrpInterval            INTEGER,
    vrrpNewCfgVirtRtrGrpPriority            INTEGER,
    vrrpNewCfgVirtRtrGrpPreempt             INTEGER,
    vrrpNewCfgVirtRtrGrpState               INTEGER,
    vrrpNewCfgVirtRtrGrpDelete              INTEGER,
    vrrpNewCfgVirtRtrGrpTckIpIntf           INTEGER,
    vrrpNewCfgVirtRtrGrpTckVlanPort         INTEGER
   ,vrrpNewCfgVirtRtrGrpFastAdvertisement   INTEGER
    ,vrrpNewCfgVirtRtrGrpPredelay            INTEGER
    }
 
vrrpNewCfgVirtRtrGrpIndx OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The VRRP virtual router table index."
    ::= { vrrpNewCfgVirtRtrGrpTableEntry 1 }

vrrpNewCfgVirtRtrGrpID OBJECT-TYPE
    SYNTAX  INTEGER (1..255)
    MAX-ACCESS  read-create
    STATUS  current 
    DESCRIPTION
        "The VRRP virtual router identifier."
    ::= { vrrpNewCfgVirtRtrGrpTableEntry 2 }

vrrpNewCfgVirtRtrGrpIfIndex OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "The IfIndex that the VRRP virtual router is representing."
    ::= { vrrpNewCfgVirtRtrGrpTableEntry 3 }

vrrpNewCfgVirtRtrGrpInterval OBJECT-TYPE
    SYNTAX  INTEGER (1..255)
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "The time interval between VRRP advertisements in seconds."
    ::= { vrrpNewCfgVirtRtrGrpTableEntry 4 }

vrrpNewCfgVirtRtrGrpPriority OBJECT-TYPE
    SYNTAX  INTEGER (1..254)
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "The priority value to be used by the specified VRRP virtual router."
    ::= { vrrpNewCfgVirtRtrGrpTableEntry 5 }

vrrpNewCfgVirtRtrGrpPreempt OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "This is for controlling whether a higher priority Backup
         VRRP virtual router preempts a low priority Master.

         enabled(1)  - allow preemption
         disabled(2) - prohibit preemption"
    ::= { vrrpNewCfgVirtRtrGrpTableEntry 6 }

vrrpNewCfgVirtRtrGrpState OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "Enable or disable the VRRP virtual router."
    ::= { vrrpNewCfgVirtRtrGrpTableEntry 7 }

vrrpNewCfgVirtRtrGrpDelete OBJECT-TYPE
    SYNTAX  INTEGER {
        other(1),
        delete(2)
        }
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "When set to the value of 2 (delete), the entire row is deleted. 
         When read, other(1) is returned. Setting the value to anything 
         other than delete(2) has no effect on the state of the row."
    ::= { vrrpNewCfgVirtRtrGrpTableEntry 8 }



vrrpNewCfgVirtRtrGrpTckIpIntf OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "Enable or disable tracking other router interfaces for
         priority adjustment.  the priority increment is defined
         in vrrpNewCfgGenTckIpIntfInc."
    ::= { vrrpNewCfgVirtRtrGrpTableEntry 11 }

vrrpNewCfgVirtRtrGrpTckVlanPort OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "Enable or disable tracking port state of VLAN ports
         for priority adjustment.  the priority increment is
         defined in vrrpNewCfgGenTckVlanPortInc."
    ::= { vrrpNewCfgVirtRtrGrpTableEntry 12 }


vrrpNewCfgVirtRtrGrpFastAdvertisement OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "This object can be enabled if sub-second advertisement interval is required.
         When FAST_ADVERTISEMENT is enabled, 
           - New message type FAST_ADVERTISEMENT(2) will be used in the
         VRRP advertisements
           - Can interop only with another FAST_ADVERTISEMENT enabled router
           - VRRP advertisement interval will be sent in units of centi-seconds
           - Timers will be running with centi-second granularity"
         
    DEFVAL    { disabled }
    ::= {vrrpNewCfgVirtRtrGrpTableEntry 17 }




vrrpNewCfgVirtRtrGrpPredelay OBJECT-TYPE
    SYNTAX  INTEGER (0..255)
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
         "The pre-emptive delay interval in seconds."
    ::= { vrrpNewCfgVirtRtrGrpTableEntry 21 }




-- Domain Name Server Configuration

dnsCurCfgPrimaryIpAddr OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The DNS primary IP address in the current configuration block."
    ::= { dnsCfg 1 }

dnsNewCfgPrimaryIpAddr OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The DNS primary IP address in the new configuration block."
    ::= { dnsCfg 2 }

dnsCurCfgSecondaryIpAddr OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The DNS primary IP address in the current configuration block."
    ::= { dnsCfg 3 }

dnsNewCfgSecondaryIpAddr OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The DNS primary IP address in the new configuration block."
    ::= { dnsCfg 4 }

dnsCurCfgDomainName OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..191))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The DNS doamin name in the current configuration block."
    ::= { dnsCfg 5 }

dnsNewCfgDomainName OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..191))
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The DNS doamin name in the new configuration block."
    ::= { dnsCfg 6 }

dnsNewCfgFirstRequestAddr OBJECT-TYPE
   SYNTAX  INTEGER{
        ipv4(1),
        ipv6(2)
        }
   MAX-ACCESS read-write
   STATUS current
   DESCRIPTION
    "Type of the first request to dns"
   ::= { dnsCfg 9 }

dnsCurCfgFirstRequestAddr OBJECT-TYPE
   SYNTAX  INTEGER{
        ipv4(1),
        ipv6(2)
        }
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
    "Type of the first request to dns"
   ::= { dnsCfg 10}

dnsCurCfgPriServerPort OBJECT-TYPE
    SYNTAX  INTEGER {
        data(1),
        mgtb(2),
        mgta(3)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Choose the port that the primary server is connected to."
    ::= { dnsCfg 11 }

dnsNewCfgPriServerPort OBJECT-TYPE
    SYNTAX  INTEGER {
        data(1),
        mgtb(2),
        mgta(3)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Choose the port that the primary server is connected to."
    ::= { dnsCfg 12 }

dnsCurCfgSecServerPort OBJECT-TYPE
    SYNTAX  INTEGER {
        data(1),
        mgtb(2),
        mgta(3)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Choose the port that the secondary server is connected to."
    ::= { dnsCfg 13 }

dnsNewCfgSecServerPort OBJECT-TYPE
    SYNTAX  INTEGER {
        data(1),
        mgtb(2),
        mgta(3)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Choose the port that the secondary server is connected to."
    ::= { dnsCfg 14 }

--
-- IP network filter configuration
--
ipNwfTableMax OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The maximum number of rows in the IP network filter table."
    ::= { ipNwfCfg 1 }

ipCurCfgNwfTable OBJECT-TYPE
    SYNTAX SEQUENCE OF IpCurCfgNwfEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "The table of IP network filter in the current configuration block."
    ::= { ipNwfCfg 2 }

ipCurCfgNwfEntry OBJECT-TYPE
    SYNTAX IpCurCfgNwfEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "Information about an IP network filter."
    INDEX { ipCurCfgNwfIndex }
    ::= { ipCurCfgNwfTable 1 }
 
IpCurCfgNwfEntry ::= SEQUENCE {
    ipCurCfgNwfIndex     Integer32,
    ipCurCfgNwfAddr      IpAddress,
    ipCurCfgNwfMask      IpAddress,
    ipCurCfgNwfState     INTEGER
    }
 
ipCurCfgNwfIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The netowrk filter number for which the NWF is related."
    ::= { ipCurCfgNwfEntry 1}

ipCurCfgNwfAddr OBJECT-TYPE
    SYNTAX IpAddress
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The IP address of the network filter."
    ::= { ipCurCfgNwfEntry 2 }

ipCurCfgNwfMask OBJECT-TYPE
    SYNTAX IpAddress
    MAX-ACCESS read-only
    STATUS current  
    DESCRIPTION
    "The IP network filter mask."
    ::= { ipCurCfgNwfEntry 3 }

ipCurCfgNwfState OBJECT-TYPE
    SYNTAX INTEGER { 
        enabled(1),
        disabled(2)
    }
    MAX-ACCESS  read-only
    STATUS  current  
    DESCRIPTION
    "Enable or disable the network filter."
    ::= { ipCurCfgNwfEntry 4 }

ipNewCfgNwfTable OBJECT-TYPE
    SYNTAX SEQUENCE OF IpNewCfgNwfEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "The table of IP network filter in the current configuration block."
    ::= { ipNwfCfg 3 }

ipNewCfgNwfEntry OBJECT-TYPE
    SYNTAX IpNewCfgNwfEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "Information about an IP network filter."
    INDEX { ipNewCfgNwfIndex }
    ::= { ipNewCfgNwfTable 1 }
 
IpNewCfgNwfEntry ::= SEQUENCE {
    ipNewCfgNwfIndex     Integer32,
    ipNewCfgNwfAddr      IpAddress,
    ipNewCfgNwfMask      IpAddress,
    ipNewCfgNwfState     INTEGER,
    ipNewCfgNwfDelete    INTEGER
    }
 
ipNewCfgNwfIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The netowrk filter number for which the NWF is related."
    ::= { ipNewCfgNwfEntry 1}

ipNewCfgNwfAddr OBJECT-TYPE
    SYNTAX IpAddress
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "The IP address of the network filter."
    ::= { ipNewCfgNwfEntry 2 }

ipNewCfgNwfMask OBJECT-TYPE
    SYNTAX IpAddress
    MAX-ACCESS read-create
    STATUS current  
    DESCRIPTION
    "The IP network filter mask."
    ::= { ipNewCfgNwfEntry 3 }

ipNewCfgNwfState OBJECT-TYPE
    SYNTAX INTEGER { 
        enabled(1),
        disabled(2)
    }
    MAX-ACCESS  read-create
    STATUS  current  
    DESCRIPTION
    "Enable or disable the network filter."
    ::= { ipNewCfgNwfEntry 4 }

ipNewCfgNwfDelete OBJECT-TYPE
    SYNTAX INTEGER { 
        other(1),
        delete(2)
        }
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "When set to the value of 2 (delete), the entire row is deleted. 
     When read, other(1) is returned. Setting the value to anything 
     other than 2(delete) has no effect on the state of the row."
    ::= { ipNewCfgNwfEntry 5 }

--
-- IP route map configuration
--
ipRmapTableMax OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The maximum number of rows in the IP route map table."
    ::= { ipRmapCfg 1 }

ipCurCfgRmapTable OBJECT-TYPE
    SYNTAX SEQUENCE OF IpCurCfgRmapEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "The table of IP route map in the current configuration block."
    ::= { ipRmapCfg 2 }

ipCurCfgRmapEntry OBJECT-TYPE
    SYNTAX IpCurCfgRmapEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "Information about an IP route map."
    INDEX { ipCurCfgRmapIndex }
    ::= { ipCurCfgRmapTable 1 }
 
IpCurCfgRmapEntry ::= SEQUENCE {
    ipCurCfgRmapIndex       Integer32,
    ipCurCfgRmapLp      Unsigned32,
    ipCurCfgRmapMetric      Unsigned32,
    ipCurCfgRmapPrec        INTEGER,
    ipCurCfgRmapWeight      INTEGER,
    ipCurCfgRmapAp              DisplayString, 
    ipCurCfgRmapMetricType      INTEGER,
    ipCurCfgRmapNexthop   INTEGER,
    ipCurCfgRmapState       INTEGER
    }
 
ipCurCfgRmapIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The route map number for which the RMAP is related."
    ::= { ipCurCfgRmapEntry 1}

ipCurCfgRmapLp OBJECT-TYPE
    SYNTAX Unsigned32 (0..4294967295) 
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The local-preference of the route map. 4294967295 means none"
    ::= { ipCurCfgRmapEntry 2 }

ipCurCfgRmapMetric OBJECT-TYPE
    SYNTAX Unsigned32 (1..4294967295) 
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The metric of the route map. 4294967295 means none.
     Range is [1-16777214] if OSPF metric-type is used."
    ::= { ipCurCfgRmapEntry 3 }

ipCurCfgRmapPrec OBJECT-TYPE
    SYNTAX INTEGER (1..255) 
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The precedence of the route map."
    ::= { ipCurCfgRmapEntry 4 }

ipCurCfgRmapWeight OBJECT-TYPE
    SYNTAX INTEGER (0..65535) 
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The weight of the route map. 65535 means none"
    ::= { ipCurCfgRmapEntry 5 }

ipCurCfgRmapState OBJECT-TYPE
    SYNTAX INTEGER { 
        enabled(1),
        disabled(2)
    }
    MAX-ACCESS  read-only
    STATUS  current  
    DESCRIPTION
    "Enable or disable the route map."
    ::= { ipCurCfgRmapEntry 6 }

ipCurCfgRmapAp OBJECT-TYPE
    SYNTAX DisplayString (SIZE(0..17)) 
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The as-path prepend of the matched route. Up to 3 AS number can be 
     displayed for the string. 
     The usuage is:<AS number> [<AS number>][ <AS number>]"
    ::= { ipCurCfgRmapEntry 7 }

ipCurCfgRmapMetricType OBJECT-TYPE
    SYNTAX INTEGER {
        none(1),
        type1(2),
        type2(3)
        }
    MAX-ACCESS  read-only
    STATUS  current  
    DESCRIPTION
    "The OSPF metric-type of the matched route."
    ::= { ipCurCfgRmapEntry 8 }
ipCurCfgRmapNexthop OBJECT-TYPE
    SYNTAX INTEGER { 
        enabled(1),
        disabled(2)
    }
    MAX-ACCESS  read-only
    STATUS  current  
    DESCRIPTION
    "Peer address as nexthop of the matched route(only for BGP)."
    ::= { ipCurCfgRmapEntry 9 }

ipNewCfgRmapTable OBJECT-TYPE
    SYNTAX SEQUENCE OF IpNewCfgRmapEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "The table of IP route map in the new configuration block."
    ::= { ipRmapCfg 3 }

ipNewCfgRmapEntry OBJECT-TYPE
    SYNTAX IpNewCfgRmapEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "Information about an IP route map."
    INDEX { ipNewCfgRmapIndex }
    ::= { ipNewCfgRmapTable 1 }
 
IpNewCfgRmapEntry ::= SEQUENCE {
    ipNewCfgRmapIndex       Integer32,
    ipNewCfgRmapLp      Unsigned32,
    ipNewCfgRmapMetric      Unsigned32,
    ipNewCfgRmapPrec        INTEGER,
    ipNewCfgRmapWeight      INTEGER,
    ipNewCfgRmapAp              DisplayString, 
    ipNewCfgRmapState       INTEGER,
    ipNewCfgRmapMetricType  INTEGER,
    ipNewCfgRmapNexthop     INTEGER,
    ipNewCfgRmapDelete      INTEGER
    }
 
ipNewCfgRmapIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The route map number for which the RMAP is related."
    ::= { ipNewCfgRmapEntry 1}

ipNewCfgRmapLp OBJECT-TYPE
    SYNTAX Unsigned32 (0..4294967295) 
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "The local-preference of the route map. 4294967295 means none"
    ::= { ipNewCfgRmapEntry 2 }

ipNewCfgRmapMetric OBJECT-TYPE
    SYNTAX Unsigned32 (1..4294967295) 
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "The metric of the route map. 4294967295 means none.
     Range is [1-16777214] if OSPF metric-type is used."
    ::= { ipNewCfgRmapEntry 3 }

ipNewCfgRmapPrec OBJECT-TYPE
    SYNTAX INTEGER (1..255) 
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "The precedence of the route map."
    ::= { ipNewCfgRmapEntry 4 }

ipNewCfgRmapWeight OBJECT-TYPE
    SYNTAX INTEGER (0..65535) 
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "The weight of the route map. 65535 means none"
    ::= { ipNewCfgRmapEntry 5 }

ipNewCfgRmapState OBJECT-TYPE
    SYNTAX INTEGER { 
        enabled(1),
        disabled(2)
    }
    MAX-ACCESS  read-create
    STATUS  current  
    DESCRIPTION
    "Enable or disable the route map."
    ::= { ipNewCfgRmapEntry 6 }

ipNewCfgRmapAp OBJECT-TYPE
    SYNTAX DisplayString (SIZE(0..17)) 
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "The as-path prepend of the matched route. Up to 3 AS number can be 
     displayed for the string. 
     The usuage is:<AS number> [<AS number>][ <AS number>]"
    ::= { ipNewCfgRmapEntry 7 }

ipNewCfgRmapMetricType OBJECT-TYPE
    SYNTAX INTEGER {
        none(1),
        type1(2),
        type2(3)
        }
    MAX-ACCESS  read-create
    STATUS  current  
    DESCRIPTION
    "The OSPF metric-type of the matched route."
    ::= { ipNewCfgRmapEntry 8 }

ipNewCfgRmapDelete OBJECT-TYPE
    SYNTAX  INTEGER {
    other(1),
    delete(2)
    }
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
    "When set to the value of 2 (delete), the entire row is deleted. 
     When read, other(1) is returned. Setting the value to anything 
     other than 2(delete) has no effect on the state of the row."
    ::= { ipNewCfgRmapEntry 9 }

ipNewCfgRmapNexthop OBJECT-TYPE
    SYNTAX INTEGER { 
        enabled(1),
        disabled(2)
    }
    MAX-ACCESS  read-create
    STATUS  current  
    DESCRIPTION
    "Peer address as nexthop of the matched route(only for BGP)."
    ::= { ipNewCfgRmapEntry 10 }

ipAlistTableMax OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The maximum number of rows in the IP route map table."
    ::= { ipRmapCfg 4 }

ipCurCfgAlistTable OBJECT-TYPE
    SYNTAX SEQUENCE OF IpCurCfgAlistEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "The table of IP route map access list in the current configuration 
       block."
    ::= { ipRmapCfg 5 }

ipCurCfgAlistEntry OBJECT-TYPE
    SYNTAX IpCurCfgAlistEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "Information about an IP route map."
    INDEX { ipCurCfgAlistRmapIndex, ipCurCfgAlistIndex }
    ::= { ipCurCfgAlistTable 1 }
 
IpCurCfgAlistEntry ::= SEQUENCE {
    ipCurCfgAlistRmapIndex  Integer32,
    ipCurCfgAlistIndex      Integer32,
    ipCurCfgAlistNwf        INTEGER,
    ipCurCfgAlistMetric     Unsigned32,
    ipCurCfgAlistAction     INTEGER,
    ipCurCfgAlistState      INTEGER
    }
 
ipCurCfgAlistRmapIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The route map number for which the RMAP is related."
    ::= { ipCurCfgAlistEntry 1 }

ipCurCfgAlistIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The access list number for which the access list is related."
    ::= { ipCurCfgAlistEntry 2 }

ipCurCfgAlistNwf OBJECT-TYPE
    SYNTAX INTEGER (0..256) 
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The network filter number of the route map access list. 
     0 means none"
    ::= { ipCurCfgAlistEntry 3 }

ipCurCfgAlistMetric OBJECT-TYPE
    SYNTAX Unsigned32 (1..4294967295) 
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The metric of the route map access list. 4294967295 means none"
    ::= { ipCurCfgAlistEntry 4 }

ipCurCfgAlistAction OBJECT-TYPE
    SYNTAX INTEGER {
    permit(1),
    deny(2)
    }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "Action of the route map access list."
    ::= { ipCurCfgAlistEntry 5 }

ipCurCfgAlistState OBJECT-TYPE
    SYNTAX INTEGER { 
        enabled(1),
        disabled(2)
    }
    MAX-ACCESS  read-only
    STATUS  current  
    DESCRIPTION
    "Enable or disable the route map access list."
    ::= { ipCurCfgAlistEntry 6 }

ipNewCfgAlistTable OBJECT-TYPE
    SYNTAX SEQUENCE OF IpNewCfgAlistEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "The table of IP route map access list in the current configuration
       block."
    ::= { ipRmapCfg 6 }

ipNewCfgAlistEntry OBJECT-TYPE
    SYNTAX IpNewCfgAlistEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "Information about an IP route map."
    INDEX { ipNewCfgAlistRmapIndex, ipNewCfgAlistIndex }
    ::= { ipNewCfgAlistTable 1 }
 
IpNewCfgAlistEntry ::= SEQUENCE {
    ipNewCfgAlistRmapIndex  Integer32,
    ipNewCfgAlistIndex      Integer32,
    ipNewCfgAlistNwf        INTEGER,
    ipNewCfgAlistMetric     Unsigned32,
    ipNewCfgAlistAction     INTEGER,
    ipNewCfgAlistState      INTEGER,
    ipNewCfgAlistDelete     INTEGER
    }
 
ipNewCfgAlistRmapIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The route map number for which the RMAP is related."
    ::= { ipNewCfgAlistEntry 1 }

ipNewCfgAlistIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The access list number for which the access list is related."
    ::= { ipNewCfgAlistEntry 2 }

ipNewCfgAlistNwf OBJECT-TYPE
    SYNTAX INTEGER (1..256) 
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "The network filter number of the route map access list. 
     0 means none"
    ::= { ipNewCfgAlistEntry 3 }

ipNewCfgAlistMetric OBJECT-TYPE
    SYNTAX Unsigned32 (1..4294967295) 
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "The metric of the route map access list. 4294967295 means none"
    ::= { ipNewCfgAlistEntry 4 }

ipNewCfgAlistAction OBJECT-TYPE
    SYNTAX INTEGER {
    permit(1),
    deny(2)
    }
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "Action of the route map access list."
    ::= { ipNewCfgAlistEntry 5 }

ipNewCfgAlistState OBJECT-TYPE
    SYNTAX INTEGER { 
        enabled(1),
        disabled(2)
    }
    MAX-ACCESS  read-create
    STATUS  current  
    DESCRIPTION
    "Enable or disable the route map access list."
    ::= { ipNewCfgAlistEntry 6 }

ipNewCfgAlistDelete OBJECT-TYPE
    SYNTAX  INTEGER {
    other(1),
    delete(2)
    }
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
    "When set to the value of 2 (delete), the entire row is deleted. 
     When read, other(1) is returned. Setting the value to anything 
     other than 2(delete) has no effect on the state of the row."
    ::= { ipNewCfgAlistEntry 7 }

ipAspathTableMax OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The maximum number of rows in the IP route map table."
    ::= { ipRmapCfg 7 }

ipCurCfgAspathTable OBJECT-TYPE
    SYNTAX SEQUENCE OF IpCurCfgAspathEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "The table of IP route map access path configuration."
    ::= { ipRmapCfg 8 }

ipCurCfgAspathEntry OBJECT-TYPE
    SYNTAX IpCurCfgAspathEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "Information about an IP route map."
    INDEX { ipCurCfgAspathRmapIndex, ipCurCfgAlistIndex }
    ::= { ipCurCfgAspathTable 1 }
 
IpCurCfgAspathEntry ::= SEQUENCE {
    ipCurCfgAspathRmapIndex Integer32,
    ipCurCfgAspathIndex     Integer32,
    ipCurCfgAspathAS        INTEGER,
    ipCurCfgAspathAction    INTEGER,
    ipCurCfgAspathState         INTEGER
    }
 
ipCurCfgAspathRmapIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The route map number for which the RMAP is related."
    ::= { ipCurCfgAspathEntry 1 }

ipCurCfgAspathIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The access path number for which the access list is related."
    ::= { ipCurCfgAspathEntry 2 }

ipCurCfgAspathAS OBJECT-TYPE
    SYNTAX INTEGER (1..65535) 
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The AS number of the route map access path. 
     0 means none"
    ::= { ipCurCfgAspathEntry 3 }

ipCurCfgAspathAction OBJECT-TYPE
    SYNTAX INTEGER {
    permit(1),
    deny(2)
    }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "Action of the route map access path."
    ::= { ipCurCfgAspathEntry 4 }

ipCurCfgAspathState OBJECT-TYPE
    SYNTAX INTEGER { 
        enabled(1),
        disabled(2)
    }
    MAX-ACCESS  read-only
    STATUS  current  
    DESCRIPTION
    "Enable or disable the route map access path."
    ::= { ipCurCfgAspathEntry 5 }

ipNewCfgAspathTable OBJECT-TYPE
    SYNTAX SEQUENCE OF IpNewCfgAspathEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "The table of IP route map access path configuration"
    ::= { ipRmapCfg 9 }

ipNewCfgAspathEntry OBJECT-TYPE
    SYNTAX IpNewCfgAspathEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "Information about an IP route map."
    INDEX { ipNewCfgAspathRmapIndex, ipNewCfgAspathIndex }
    ::= { ipNewCfgAspathTable 1 }
 
IpNewCfgAspathEntry ::= SEQUENCE {
    ipNewCfgAspathRmapIndex Integer32,
    ipNewCfgAspathIndex     Integer32,
    ipNewCfgAspathAS        INTEGER,
    ipNewCfgAspathAction    INTEGER,
    ipNewCfgAspathState         INTEGER,
    ipNewCfgAspathDelete    INTEGER
    }
 
ipNewCfgAspathRmapIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The route map number for which the RMAP is related."
    ::= { ipNewCfgAspathEntry 1 }

ipNewCfgAspathIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The access path number for which the access list is related."
    ::= { ipNewCfgAspathEntry 2 }

ipNewCfgAspathAS OBJECT-TYPE
    SYNTAX INTEGER (1..65535) 
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "The AS number of the route map access path. 
     0 means none"
    ::= { ipNewCfgAspathEntry 3 }

ipNewCfgAspathAction OBJECT-TYPE
    SYNTAX INTEGER {
    permit(1),
    deny(2)
    }
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "Action of the route map access path."
    ::= { ipNewCfgAspathEntry 4 }

ipNewCfgAspathState OBJECT-TYPE
    SYNTAX INTEGER { 
        enabled(1),
        disabled(2)
    }
    MAX-ACCESS  read-create
    STATUS  current  
    DESCRIPTION
    "Enable or disable the route map access path."
    ::= { ipNewCfgAspathEntry 5 }

ipNewCfgAspathDelete OBJECT-TYPE
    SYNTAX  INTEGER {
    other(1),
    delete(2)
    }
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
    "When set to the value of 2 (delete), the entire row is deleted. 
     When read, other(1) is returned. Setting the value to anything 
     other than 2(delete) has no effect on the state of the row."
    ::= { ipNewCfgAspathEntry 6 }

--
-- IP BGP configuration
--
bgpGeneral  OBJECT IDENTIFIER ::= { bgpCfg 1 }

bgpCurCfgState OBJECT-TYPE
    SYNTAX INTEGER {
        on(1),
        off(2)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "BGP global state."
    ::= { bgpGeneral 1 }

bgpNewCfgState OBJECT-TYPE
    SYNTAX INTEGER {
        on(1),
        off(2)
        }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
    "Globally turn BGP on or off."
    ::= { bgpGeneral 2 }

bgpCurCfgLocalPref OBJECT-TYPE
    SYNTAX Unsigned32 (0..4294967294) 
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Local preference value."
      ::= { bgpGeneral 3 }

bgpNewCfgLocalPref OBJECT-TYPE
    SYNTAX Unsigned32 (0..4294967294) 
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Local Preference value."
      ::= { bgpGeneral 4 }

bgpCurCfgASNumber OBJECT-TYPE
    SYNTAX INTEGER (0..65535)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The autonomous system (AS) number."
    ::= { bgpGeneral 5 }

bgpNewCfgASNumber OBJECT-TYPE
    SYNTAX INTEGER (0..65535)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
    "The autonomous system (AS) number."
    ::= { bgpGeneral 6 }

bgpCurCfgEbgpMaxPaths OBJECT-TYPE
    SYNTAX Unsigned32 (0..4294967294) 
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Maximum eBGP Paths."
      ::= { bgpGeneral 7 }

bgpNewCfgEbgpMaxPaths OBJECT-TYPE
    SYNTAX Unsigned32 (0..4294967294) 
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Maximum eBGP Paths."
      ::= { bgpGeneral 8 }

bgpCurCfgIbgpMaxPaths OBJECT-TYPE
    SYNTAX Unsigned32 (0..4294967294)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Maximum iBGP Paths."
      ::= { bgpGeneral 9 }

bgpNewCfgIbgpMaxPaths OBJECT-TYPE
    SYNTAX Unsigned32 (0..4294967294)  
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Maximum iBGP Paths."
      ::= { bgpGeneral 10 }

bgpCurCfgAsn4Comp OBJECT-TYPE
    SYNTAX INTEGER {
        enabled(1),
        disabled(2)
    }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "ASN4 to ASN2 compatibility."
    ::= { bgpGeneral 11 }

bgpNewCfgAsn4Comp OBJECT-TYPE
    SYNTAX INTEGER {
        enabled(1),
        disabled(2)
    }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
    "ASN4 to ASN2 compatibility."
    ::= { bgpGeneral 12 }

bgpCurCfgDscp OBJECT-TYPE
    SYNTAX INTEGER (0..63)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "BGP dscp marking value."
      ::= { bgpGeneral 13 }

bgpNewCfgDscp OBJECT-TYPE
    SYNTAX INTEGER (0..63)
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "BGP dscp marking value."
      ::= { bgpGeneral 14 }

bgpNewCfgClusterId OBJECT-TYPE 

    SYNTAX IpAddress
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
	"Cluster ID."
    ::= { bgpGeneral 15 }

bgpCurCfgClusterId OBJECT-TYPE
    SYNTAX IpAddress
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Cluster ID."
    ::= { bgpGeneral 16 }

bgpNewCfgClientToClientReflection OBJECT-TYPE
    SYNTAX INTEGER { 
        enabled(1),
        disabled(2)
    }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
	"Enable/disable client to client route reflection"
    ::= { bgpGeneral 17 }

bgpCurCfgClientToClientReflection OBJECT-TYPE
    SYNTAX INTEGER { 
        enabled(1),
        disabled(2)
    }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Enable/disable client to client route reflection"
    ::= { bgpGeneral 18 }
      
bgpPeerTableMax OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The maximum number of rows in the BGP peer table."
    ::= { bgpCfg 2 }

bgpCurCfgPeerTable OBJECT-TYPE
    SYNTAX SEQUENCE OF BgpCurCfgPeerEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "The table of BGP peer in the current configuration block."
    ::= { bgpCfg 3 }

bgpCurCfgPeerEntry OBJECT-TYPE
    SYNTAX BgpCurCfgPeerEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "Information about a BGP peer."
    INDEX { bgpCurCfgPeerIndex }
    ::= { bgpCurCfgPeerTable 1 }

BgpCurCfgPeerEntry ::= SEQUENCE {
    bgpCurCfgPeerIndex      Integer32,
    bgpCurCfgPeerRemoteAddr IpAddress,
    bgpCurCfgPeerRemoteAs   INTEGER,
    bgpCurCfgPeerPassive      INTEGER,  
    bgpCurCfgPeerHold       INTEGER,
    bgpCurCfgPeerAlive      INTEGER,
    bgpCurCfgPeerAdvert     INTEGER,
    bgpCurCfgPeerRetry      INTEGER,
    bgpCurCfgPeerOrig       INTEGER,
    bgpCurCfgPeerRipState       INTEGER,
    bgpCurCfgPeerTtl        INTEGER,
    bgpCurCfgPeerPassword   DisplayString,
    bgpCurCfgPeerState      INTEGER,
    bgpCurCfgPeerMetric     Unsigned32,
    bgpCurCfgPeerDefaultAction  INTEGER,
    bgpCurCfgPeerOspfState  INTEGER,
    bgpCurCfgPeerFixedState     INTEGER,
    bgpCurCfgPeerStaticState    INTEGER,
    bgpCurCfgPeerInRmapList     OCTET STRING,
    bgpCurCfgPeerOutRmapList    OCTET STRING
    , bgpCurCfgPeerUpdateSrcIf        INTEGER
    , bgpCurCfgPeerUpdateSrcLoopIf    INTEGER
    , bgpCurCfgPeerTtlSecHops   INTEGER
    ,bgpCurCfgPeerNexthopSelf  INTEGER
    , bgpCurCfgPeerClient             INTEGER
    }

bgpCurCfgPeerIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The BGP peer number for which the BGP peer table is related."
    ::= { bgpCurCfgPeerEntry 1 }

bgpCurCfgPeerRemoteAddr OBJECT-TYPE
    SYNTAX IpAddress
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The remote IP address of the BGP peer."
    ::= { bgpCurCfgPeerEntry 2 }

bgpCurCfgPeerRemoteAs OBJECT-TYPE
    SYNTAX INTEGER (1..65535)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The remote AS number of the BGP peer.  0 means none" 
    ::= { bgpCurCfgPeerEntry 3 }

bgpCurCfgPeerTtl OBJECT-TYPE
    SYNTAX INTEGER (0..255)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The time-to-live value of the BGP peer IP datagram. 0 means none."
    ::= { bgpCurCfgPeerEntry 4 }

bgpCurCfgPeerState OBJECT-TYPE
    SYNTAX INTEGER { 
        enabled(1),
        disabled(2)
    }
    MAX-ACCESS  read-only
    STATUS  current  
    DESCRIPTION
    "Enable or disable the peer."
    ::= { bgpCurCfgPeerEntry 5 }

bgpCurCfgPeerMetric OBJECT-TYPE
    SYNTAX Unsigned32 (0..4294967294) 
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The metric value of the BGP peer.  A value of '0' means none" 
    ::= { bgpCurCfgPeerEntry 10 }

bgpCurCfgPeerDefaultAction OBJECT-TYPE
    SYNTAX INTEGER { 
        none(1),
        import(2),
    originate(3),
    redistribute(4)
    }
    MAX-ACCESS  read-only
    STATUS  current  
    DESCRIPTION
    "The value of default route action."
    ::= { bgpCurCfgPeerEntry 11 }

bgpCurCfgPeerOspfState OBJECT-TYPE
    SYNTAX INTEGER { 
        enabled(1),
        disabled(2)
    }
    MAX-ACCESS  read-only
    STATUS  current  
    DESCRIPTION
    "Enable or disable advertising OSPF routes."
    ::= { bgpCurCfgPeerEntry 12 }

bgpCurCfgPeerFixedState OBJECT-TYPE
    SYNTAX INTEGER { 
        enabled(1),
        disabled(2)
    }
    MAX-ACCESS  read-only
    STATUS  current  
    DESCRIPTION
    "Enable or disable advertising fixed routes."
    ::= { bgpCurCfgPeerEntry 13 }

bgpCurCfgPeerStaticState OBJECT-TYPE
    SYNTAX INTEGER { 
        enabled(1),
        disabled(2)
    }
    MAX-ACCESS  read-only
    STATUS  current  
    DESCRIPTION
    "Enable or disable advertising static routes."
    ::= { bgpCurCfgPeerEntry 14 }


bgpCurCfgPeerInRmapList OBJECT-TYPE
    SYNTAX OCTET STRING
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The route maps present in the in route map list. 
         The route maps are presented in a bitmap format.

         in receiving order:

         OCTET 1  OCTET 2  .....
         xxxxxxxx xxxxxxxx .....
         ||    || |_ Rmap 9
         ||    ||
         ||    ||___ Rmap 8
         ||    |____ Rmap 7
         ||      .    .   .
         ||_________ Rmap 2
         |__________ Rmap 1

         where x : 1 - The represented route map is selected
         0 - The represented route map is not selected"
    ::= { bgpCurCfgPeerEntry 16 }

bgpCurCfgPeerOutRmapList OBJECT-TYPE
    SYNTAX OCTET STRING
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The route maps present in the out route map list. 
         The route maps are presented in a bitmap format.

         in receiving order:

         OCTET 1  OCTET 2  .....
         xxxxxxxx xxxxxxxx .....
         ||    || |_ Rmap 9
         ||    ||
         ||    ||___ Rmap 8
         ||    |____ Rmap 7
         ||      .    .   .
         ||_________ Rmap 2
         |__________ Rmap 1

         where x : 1 - The represented route map is selected
         0 - The represented route map is not selected"
    ::= { bgpCurCfgPeerEntry 17 }

bgpCurCfgPeerHold OBJECT-TYPE
    SYNTAX INTEGER (0..65535) 
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
    "The hold time"    
    ::= { bgpCurCfgPeerEntry 18 }

bgpCurCfgPeerAlive OBJECT-TYPE
    SYNTAX INTEGER (0..21845)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The keep alive time"
    ::= { bgpCurCfgPeerEntry 19 }

bgpCurCfgPeerAdvert OBJECT-TYPE
    SYNTAX INTEGER (1..65535)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The min time between advertisements"
    ::= { bgpCurCfgPeerEntry 20 }

bgpCurCfgPeerRetry OBJECT-TYPE
    SYNTAX INTEGER (1..65535)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The connect retry interval"
    ::= { bgpCurCfgPeerEntry 21 }

bgpCurCfgPeerOrig OBJECT-TYPE
    SYNTAX INTEGER (1..65535)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The min time between route originations"
    ::= { bgpCurCfgPeerEntry 22 }

bgpCurCfgPeerRipState OBJECT-TYPE
    SYNTAX INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "Enable/disable advertising RIP routes"
    ::= { bgpCurCfgPeerEntry 23 }

bgpCurCfgPeerPassword OBJECT-TYPE
    SYNTAX DisplayString (SIZE(0..16)) 
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "Peer BGP password"
    ::= { bgpCurCfgPeerEntry 24 }

    bgpCurCfgPeerPassive OBJECT-TYPE  
    SYNTAX INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "Enable/disable BGP passive peer"
    ::= { bgpCurCfgPeerEntry 25 }

bgpCurCfgPeerUpdateSrcIf OBJECT-TYPE
    SYNTAX INTEGER 
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "BGP peer update source interface index"
    ::= { bgpCurCfgPeerEntry 30 }

bgpCurCfgPeerUpdateSrcLoopIf OBJECT-TYPE
    SYNTAX INTEGER
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "BGP peer update source loopback interface index"
    ::= { bgpCurCfgPeerEntry 31 }

bgpCurCfgPeerTtlSecHops OBJECT-TYPE
    SYNTAX INTEGER (0..254)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The BGP ttl security hops. 0 means none."
    ::= { bgpCurCfgPeerEntry 32 }

    bgpCurCfgPeerNexthopSelf OBJECT-TYPE  
    SYNTAX INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Enable/Disable using this router as next-hop in BGP updates."
    ::= { bgpCurCfgPeerEntry 33 }
    bgpCurCfgPeerClient OBJECT-TYPE  
    SYNTAX INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Enable/disable BGP client peer"
    ::= { bgpCurCfgPeerEntry 34 }

bgpNewCfgPeerTable OBJECT-TYPE
    SYNTAX SEQUENCE OF BgpNewCfgPeerEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "The table of BGP peer in the new configuration block."
    ::= { bgpCfg 4 }

bgpNewCfgPeerEntry OBJECT-TYPE
    SYNTAX BgpNewCfgPeerEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "Information about a BGP peer."
    INDEX { bgpNewCfgPeerIndex }
    ::= { bgpNewCfgPeerTable 1 }
 
BgpNewCfgPeerEntry ::= SEQUENCE {
    bgpNewCfgPeerIndex      Integer32,
    bgpNewCfgPeerRemoteAddr IpAddress,
    bgpNewCfgPeerRemoteAs   INTEGER,
    bgpNewCfgPeerPassive        INTEGER,
    bgpNewCfgPeerHold       INTEGER,    
    bgpNewCfgPeerAlive      INTEGER,
    bgpNewCfgPeerAdvert     INTEGER,
    bgpNewCfgPeerRetry      INTEGER,
    bgpNewCfgPeerOrig       INTEGER,        
    bgpNewCfgPeerRipState       INTEGER,
    bgpNewCfgPeerTtl        INTEGER,
    bgpNewCfgPeerPassword       DisplayString,
    bgpNewCfgPeerState      INTEGER,
    bgpNewCfgPeerDelete     INTEGER,
    bgpNewCfgPeerMetric     Unsigned32,
    bgpNewCfgPeerDefaultAction  INTEGER,
    bgpNewCfgPeerOspfState  INTEGER,
    bgpNewCfgPeerFixedState     INTEGER,
    bgpNewCfgPeerStaticState    INTEGER,
    bgpNewCfgPeerInRmapList OCTET STRING,
    bgpNewCfgPeerOutRmapList    OCTET STRING,
    bgpNewCfgPeerAddInRmap  Integer32,
    bgpNewCfgPeerAddOutRmap Integer32,
    bgpNewCfgPeerRemoveInRmap   Integer32,
    bgpNewCfgPeerRemoveOutRmap  Integer32
    , bgpNewCfgPeerUpdateSrcIf        INTEGER
    , bgpNewCfgPeerUpdateSrcLoopIf    INTEGER
    , bgpNewCfgPeerTtlSecHops   INTEGER
    ,bgpNewCfgPeerNexthopSelf    INTEGER
    , bgpNewCfgPeerClient             INTEGER
    }
 
bgpNewCfgPeerIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The BGP peer number for which the BGP peer table is related."
    ::= { bgpNewCfgPeerEntry 1}

bgpNewCfgPeerRemoteAddr OBJECT-TYPE
    SYNTAX IpAddress
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "The remote IP address of the BGP peer." 
    ::= { bgpNewCfgPeerEntry 2 }

bgpNewCfgPeerRemoteAs OBJECT-TYPE
    SYNTAX INTEGER (1..65535) 
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "The remote AS number of the BGP peer.  0 means none" 
    ::= { bgpNewCfgPeerEntry 3 }

bgpNewCfgPeerTtl OBJECT-TYPE
    SYNTAX INTEGER (0..255)
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "The time-to-live value of the BGP peer IP datagram. 0 means none."
    ::= { bgpNewCfgPeerEntry 4 }

bgpNewCfgPeerState OBJECT-TYPE
    SYNTAX INTEGER { 
        enabled(1),
        disabled(2)
    }
    MAX-ACCESS  read-create
    STATUS  current  
    DESCRIPTION
    "Enable or disable the peer."
    ::= { bgpNewCfgPeerEntry 5 }

bgpNewCfgPeerDelete OBJECT-TYPE
    SYNTAX INTEGER { 
        other(1),
        delete(2)
        }
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "When set to the value of 2 (delete), the entire row is deleted. 
     When read, other(1) is returned. Setting the value to anything 
     other than 2(delete) has no effect on the state of the row."
    ::= { bgpNewCfgPeerEntry 6 }

bgpNewCfgPeerMetric OBJECT-TYPE
    SYNTAX Unsigned32 (0..4294967294) 
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "The metric value of the BGP peer. A value of '0' means none" 
    ::= { bgpNewCfgPeerEntry 10 }

bgpNewCfgPeerDefaultAction OBJECT-TYPE
    SYNTAX INTEGER { 
        none(1),
        import(2),
    originate(3),
    redistribute(4)
    }
    MAX-ACCESS  read-create
    STATUS  current  
    DESCRIPTION
    "The value of default route action."
    ::= { bgpNewCfgPeerEntry 11 }

bgpNewCfgPeerOspfState OBJECT-TYPE
    SYNTAX INTEGER { 
        enabled(1),
        disabled(2)
    }
    MAX-ACCESS  read-create
    STATUS  current  
    DESCRIPTION
    "Enable or disable advertising OSPF routes."
    ::= { bgpNewCfgPeerEntry 12 }

bgpNewCfgPeerFixedState OBJECT-TYPE
    SYNTAX INTEGER { 
        enabled(1),
        disabled(2)
    }
    MAX-ACCESS  read-create
    STATUS  current  
    DESCRIPTION
    "Enable or disable advertising fixed routes."
    ::= { bgpNewCfgPeerEntry 13 }

bgpNewCfgPeerStaticState OBJECT-TYPE
    SYNTAX INTEGER { 
        enabled(1),
        disabled(2)
    }
    MAX-ACCESS  read-create
    STATUS  current  
    DESCRIPTION
    "Enable or disable advertising static routes."
    ::= { bgpNewCfgPeerEntry 14 }


bgpNewCfgPeerInRmapList OBJECT-TYPE
    SYNTAX OCTET STRING
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The route maps present in the in route map list. 
         The route maps are presented in a bitmap format.

         in receiving order:

         OCTET 1  OCTET 2  .....
         xxxxxxxx xxxxxxxx .....
         ||    || |_ Rmap 9
         ||    ||
         ||    ||___ Rmap 8
         ||    |____ Rmap 7
         ||      .    .   .
         ||_________ Rmap 2
         |__________ Rmap 1

         where x : 1 - The represented route map is selected
         0 - The represented route map is not selected"
    ::= { bgpNewCfgPeerEntry 16 }

bgpNewCfgPeerOutRmapList OBJECT-TYPE
    SYNTAX OCTET STRING
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The route maps present in the out route map list. 
         The route maps are presented in a bitmap format.

         in receiving order:

         OCTET 1  OCTET 2  .....
         xxxxxxxx xxxxxxxx .....
         ||    || |_ Rmap 9
         ||    ||
         ||    ||___ Rmap 8
         ||    |____ Rmap 7
         ||      .    .   .
         ||_________ Rmap 2
         |__________ Rmap 1

         where x : 1 - The represented route map is selected
         0 - The represented route map is not selected"
    ::= { bgpNewCfgPeerEntry 17 }

bgpNewCfgPeerAddInRmap OBJECT-TYPE
    SYNTAX Integer32 
    MAX-ACCESS  read-create
    STATUS  current  
    DESCRIPTION
    "The route map to be add into in-rmap list. When read,
     0 is returned."
    ::= { bgpNewCfgPeerEntry 18 }

bgpNewCfgPeerAddOutRmap OBJECT-TYPE
    SYNTAX Integer32 
    MAX-ACCESS  read-create
    STATUS  current  
    DESCRIPTION
    "The route map to be add into out-rmap list. When read,
     0 is returned."
    ::= { bgpNewCfgPeerEntry 19 }

bgpNewCfgPeerRemoveInRmap OBJECT-TYPE
    SYNTAX Integer32 
    MAX-ACCESS  read-create
    STATUS  current  
    DESCRIPTION
    "The route map to be removed from out-rmap list. When read,
     0 is returned."
    ::= { bgpNewCfgPeerEntry 20 }

bgpNewCfgPeerRemoveOutRmap OBJECT-TYPE
    SYNTAX Integer32 
    MAX-ACCESS  read-create
    STATUS  current  
    DESCRIPTION
    "The route map to be removed from out-rmap list. When read,
     0 is returned."
    ::= { bgpNewCfgPeerEntry 21 }

bgpNewCfgPeerHold OBJECT-TYPE
    SYNTAX INTEGER (0..65535)
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "The hold time"
    ::= { bgpNewCfgPeerEntry 22 }

bgpNewCfgPeerAlive OBJECT-TYPE
    SYNTAX INTEGER (0..21845)
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "The keep alive time"
    ::= { bgpNewCfgPeerEntry 23 }

bgpNewCfgPeerAdvert OBJECT-TYPE
    SYNTAX INTEGER (1..65535)
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "The min time between advertisements"
    ::= { bgpNewCfgPeerEntry 24 }

bgpNewCfgPeerRetry OBJECT-TYPE
    SYNTAX INTEGER (1..65535)
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "The connect retry interval"
    ::= { bgpNewCfgPeerEntry 25 } 

bgpNewCfgPeerOrig OBJECT-TYPE
    SYNTAX INTEGER (1..65535)
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "The min time between route originations"
    ::= { bgpNewCfgPeerEntry 26 }

bgpNewCfgPeerRipState OBJECT-TYPE
    SYNTAX INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "Enable/disable advertising RIP routes"
    ::= { bgpNewCfgPeerEntry 27 }

bgpNewCfgPeerPassword OBJECT-TYPE
    SYNTAX DisplayString (SIZE(0..16))
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "Peer BGP password"
    ::= { bgpNewCfgPeerEntry 28 }

bgpNewCfgPeerPassive OBJECT-TYPE  
    SYNTAX INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "Enable/disable BGP passive peer"
    ::= { bgpNewCfgPeerEntry 29 }

bgpNewCfgPeerUpdateSrcIf OBJECT-TYPE
    SYNTAX INTEGER
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "BGP peer update source interface index"
    ::= { bgpNewCfgPeerEntry 30 }

bgpNewCfgPeerUpdateSrcLoopIf OBJECT-TYPE
    SYNTAX INTEGER
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "BGP peer update source loopback interface index"
    ::= { bgpNewCfgPeerEntry 31 }

bgpNewCfgPeerTtlSecHops OBJECT-TYPE
    SYNTAX INTEGER (0..254)
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "The BGP ttl security hops. 0 means none."
    ::= { bgpNewCfgPeerEntry 32 }
bgpNewCfgPeerNexthopSelf OBJECT-TYPE  
    SYNTAX INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
	"Enable/Disable using this router as next-hop in BGP updates."
    ::= { bgpNewCfgPeerEntry 33 }
bgpNewCfgPeerClient OBJECT-TYPE  
    SYNTAX INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
	"Enable/disable BGP client peer"
    ::= { bgpNewCfgPeerEntry 34 }

--
-- BGP Aggregation Table
--
bgpAggrTableMax OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The maximum number of rows in the BGP aggregation table."
    ::= { bgpCfg 5 }

bgpCurCfgAggrTable OBJECT-TYPE
    SYNTAX SEQUENCE OF BgpCurCfgAggrEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "The table of BGP aggregation configuration."
    ::= { bgpCfg 6 }

bgpCurCfgAggrEntry OBJECT-TYPE
    SYNTAX BgpCurCfgAggrEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "Information about a BGP aggregation."
    INDEX { bgpCurCfgAggrIndex }
    ::= { bgpCurCfgAggrTable 1 }
 
BgpCurCfgAggrEntry ::= SEQUENCE {
    bgpCurCfgAggrIndex     Integer32,
    bgpCurCfgAggrAddr      IpAddress,
    bgpCurCfgAggrMask      IpAddress,
    bgpCurCfgAggrState     INTEGER
    }
 
bgpCurCfgAggrIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The aggregation number for which the BGP aggregation is related."
    ::= { bgpCurCfgAggrEntry 1}

bgpCurCfgAggrAddr OBJECT-TYPE
    SYNTAX IpAddress
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The IP address of the BGP aggregation."
    ::= { bgpCurCfgAggrEntry 2 }

bgpCurCfgAggrMask OBJECT-TYPE
    SYNTAX IpAddress
    MAX-ACCESS read-only
    STATUS current  
    DESCRIPTION
    "The subnet mask of the BGP aggregation."
    ::= { bgpCurCfgAggrEntry 3 }

bgpCurCfgAggrState OBJECT-TYPE
    SYNTAX INTEGER { 
        enabled(1),
        disabled(2)
    }
    MAX-ACCESS  read-only
    STATUS  current  
    DESCRIPTION
    "Enable or disable the BGP aggregation."
    ::= { bgpCurCfgAggrEntry 4 }

bgpNewCfgAggrTable OBJECT-TYPE
    SYNTAX SEQUENCE OF BgpNewCfgAggrEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "The table of BGP aggregation configuration."
    ::= { bgpCfg 7 }

bgpNewCfgAggrEntry OBJECT-TYPE
    SYNTAX BgpNewCfgAggrEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "Information about an BGP aggregation."
    INDEX { bgpNewCfgAggrIndex }
    ::= { bgpNewCfgAggrTable 1 }
 
BgpNewCfgAggrEntry ::= SEQUENCE {
    bgpNewCfgAggrIndex     Integer32,
    bgpNewCfgAggrAddr      IpAddress,
    bgpNewCfgAggrMask      IpAddress,
    bgpNewCfgAggrState     INTEGER,
    bgpNewCfgAggrDelete    INTEGER
    }
 
bgpNewCfgAggrIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The aggregation number for which the BGP aggregation is related."
    ::= { bgpNewCfgAggrEntry 1}

bgpNewCfgAggrAddr OBJECT-TYPE
    SYNTAX IpAddress
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "The IP address of the BGP aggregation."
    ::= { bgpNewCfgAggrEntry 2 }

bgpNewCfgAggrMask OBJECT-TYPE
    SYNTAX IpAddress
    MAX-ACCESS read-create
    STATUS current  
    DESCRIPTION
    "The subnet mask of the BGP aggregation."
    ::= { bgpNewCfgAggrEntry 3 }

bgpNewCfgAggrState OBJECT-TYPE
    SYNTAX INTEGER { 
        enabled(1),
        disabled(2)
    }
    MAX-ACCESS  read-create
    STATUS  current  
    DESCRIPTION
    "Enable or disable the BGP aggregation."
    ::= { bgpNewCfgAggrEntry 4 }

bgpNewCfgAggrDelete OBJECT-TYPE
    SYNTAX INTEGER { 
        other(1),
        delete(2)
        }
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "When set to the value of 2 (delete), the entire row is deleted. 
     When read, other(1) is returned. Setting the value to anything 
     other than 2(delete) has no effect on the state of the row."
    ::= { bgpNewCfgAggrEntry 5 }

bgpGroupTableMax OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
    "The maximum number of groups in the BGP groups table."
    ::= { bgpCfg 8 }

bgpCurCfgGroupTable OBJECT-TYPE
    SYNTAX SEQUENCE OF BgpCurCfgGroupEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
    "The table of BGP group in the current configuration block."
    ::= { bgpCfg 9 }

bgpCurCfgGroupEntry OBJECT-TYPE
    SYNTAX      BgpCurCfgGroupEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
    "Information about a BGP group."
    INDEX { bgpCurCfgGroupIndex }
    ::= { bgpCurCfgGroupTable 1 }

BgpCurCfgGroupEntry ::= SEQUENCE {
    bgpCurCfgGroupIndex         Integer32,
    bgpCurCfgGroupName          DisplayString,
    bgpCurCfgGroupRemoteAddr    IpAddress,
    bgpCurCfgGroupRemoteMask    IpAddress,
    bgpCurCfgGroupLimit         INTEGER,
    bgpCurCfgGroupUpdateSrcIf   INTEGER,
    bgpCurCfgGroupUpdateSrcLoopIf INTEGER,
    bgpCurCfgGroupHold          INTEGER,
    bgpCurCfgGroupAlive         INTEGER,
    bgpCurCfgGroupAdvert        INTEGER,
    bgpCurCfgGroupOrig          INTEGER,
    bgpCurCfgGroupMetric        Unsigned32,
    bgpCurCfgGroupTtl           INTEGER,
    bgpCurCfgGroupDefaultAction INTEGER,
    bgpCurCfgGroupOspfState     INTEGER,
    bgpCurCfgGroupRipState      INTEGER,
    bgpCurCfgGroupFixedState    INTEGER,
    bgpCurCfgGroupStaticState   INTEGER,
    bgpCurCfgGroupInRmapList    OCTET STRING,
    bgpCurCfgGroupOutRmapList   OCTET STRING,
    bgpCurCfgGroupPassword      DisplayString,
    bgpCurCfgGroupState         INTEGER
    , bgpCurCfgGroupTtlSecHops  INTEGER
    ,bgpCurCfgGroupNexthopSelf  INTEGER
    , bgpCurCfgGroupClient      INTEGER
    } 

bgpCurCfgGroupIndex OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
    "The BGP group number for which the BGP group table is related."
    ::= { bgpCurCfgGroupEntry 1 }

bgpCurCfgGroupName OBJECT-TYPE
    SYNTAX          DisplayString (SIZE(0..32))
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
    "The group name."
    ::= { bgpCurCfgGroupEntry 2 }

bgpCurCfgGroupRemoteAddr OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
    "The IP address of the BGP group."
    ::= { bgpCurCfgGroupEntry 3 }

bgpCurCfgGroupRemoteMask OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
    "The subnet mask of the BGP group."
    ::= { bgpCurCfgGroupEntry 4 }
  
bgpCurCfgGroupLimit OBJECT-TYPE
    SYNTAX      INTEGER (1..96)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
    " The maximum number of BGP dynamic peers."
    ::= { bgpCurCfgGroupEntry 5 }

bgpCurCfgGroupUpdateSrcIf OBJECT-TYPE
    SYNTAX INTEGER
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "BGP group update source interface index"
    ::= { bgpCurCfgGroupEntry 6 }

bgpCurCfgGroupUpdateSrcLoopIf OBJECT-TYPE
    SYNTAX INTEGER
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "BGP group update source loopback interface index"
    ::= { bgpCurCfgGroupEntry 7 }

bgpCurCfgGroupHold OBJECT-TYPE
    SYNTAX      INTEGER (0..65535)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
    "The hold time"
    ::= { bgpCurCfgGroupEntry 8 }

bgpCurCfgGroupAlive OBJECT-TYPE
    SYNTAX INTEGER  (0..21845)
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
    "The keep alive time"
    ::= { bgpCurCfgGroupEntry 9 }

bgpCurCfgGroupAdvert OBJECT-TYPE
    SYNTAX INTEGER  (1..65535)
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
    "The min time between advertisements"
    ::= { bgpCurCfgGroupEntry 10 }

bgpCurCfgGroupOrig OBJECT-TYPE
    SYNTAX INTEGER  (1..65535)
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
    "The min time between route originations"
    ::= { bgpCurCfgGroupEntry 11 }

bgpCurCfgGroupMetric OBJECT-TYPE
    SYNTAX      Unsigned32 (0..4294967294)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
    "The metric value of the BGP group.  A value of '0' means none"
    ::= { bgpCurCfgGroupEntry 12 }

bgpCurCfgGroupTtl OBJECT-TYPE
    SYNTAX      INTEGER (0..255)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
    "The time-to-live value of the BGP peer IP datagram. 0 means none."
    ::= { bgpCurCfgGroupEntry 13 }

bgpCurCfgGroupDefaultAction OBJECT-TYPE
    SYNTAX INTEGER {
        none(1),
        import(2),
        originate(3),
        redistribute(4)
        }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
    "The value of default route action."
    ::= { bgpCurCfgGroupEntry 14 }

bgpCurCfgGroupOspfState OBJECT-TYPE
    SYNTAX INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
    "Enable or disable advertising OSPF routes."
    ::= { bgpCurCfgGroupEntry 15 }

bgpCurCfgGroupRipState OBJECT-TYPE
    SYNTAX INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
    "Enable/disable advertising RIP routes"
    ::= { bgpCurCfgGroupEntry 16 }

bgpCurCfgGroupFixedState OBJECT-TYPE
    SYNTAX INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION    
    "Enable or disable advertising fixed routes."
    ::= { bgpCurCfgGroupEntry 17 }

bgpCurCfgGroupStaticState OBJECT-TYPE
    SYNTAX INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
    "Enable or disable advertising static routes."
    ::= { bgpCurCfgGroupEntry 18 }

bgpCurCfgGroupInRmapList OBJECT-TYPE
    SYNTAX      OCTET STRING
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
    "The route maps present in the in route map list.
     The route maps are presented in a bitmap format.

     in receiving order:

         OCTET 1  OCTET 2  .....
         xxxxxxxx xxxxxxxx .....
         ||    || |_ Rmap 9
         ||    ||
         ||    ||___ Rmap 8
         ||    |____ Rmap 7
         ||      .    .   .
         ||_________ Rmap 2
         |__________ Rmap 1

     where x :  1 - The represented route map is selected
                0 - The represented route map is not selected"
    ::= { bgpCurCfgGroupEntry 19 }

bgpCurCfgGroupOutRmapList OBJECT-TYPE
    SYNTAX      OCTET STRING
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
    "The route maps present in the out route map list.
     The route maps are presented in a bitmap format.

     in receiving order:

         OCTET 1  OCTET 2  .....
         xxxxxxxx xxxxxxxx .....
         ||    || |_ Rmap 9
         ||    ||
         ||    ||___ Rmap 8
         ||    |____ Rmap 7
         ||      .    .   .
         ||_________ Rmap 2
         |__________ Rmap 1

     where x :  1 - The represented route map is selected
                0 - The represented route map is not selected"
    ::= { bgpCurCfgGroupEntry 20 }

bgpCurCfgGroupPassword OBJECT-TYPE
    SYNTAX      DisplayString (SIZE(0..16))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
    "Peer BGP password"
    ::= { bgpCurCfgGroupEntry 21 }

bgpCurCfgGroupState OBJECT-TYPE
    SYNTAX INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
    "Enable or disable the group."
    ::= { bgpCurCfgGroupEntry 22 }

bgpCurCfgGroupTtlSecHops OBJECT-TYPE
    SYNTAX      INTEGER (0..254)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
    "The BGP ttl security hops. 0 means none."
    ::= { bgpCurCfgGroupEntry 23 }

    bgpCurCfgGroupNexthopSelf OBJECT-TYPE  
    SYNTAX INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Enable/Disable using this router as next-hop in BGP updates."
    ::= { bgpCurCfgGroupEntry 24 }

    bgpCurCfgGroupClient OBJECT-TYPE  
    SYNTAX INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Enable/Disable Route Reflector for this client."
    ::= { bgpCurCfgGroupEntry 25 }


bgpNewCfgGroupTable OBJECT-TYPE
    SYNTAX SEQUENCE OF BgpNewCfgGroupEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
    "The table of BGP group in the new configuration block."
    ::= { bgpCfg 10 }

bgpNewCfgGroupEntry OBJECT-TYPE
    SYNTAX      BgpNewCfgGroupEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
    "Information about a BGP group."
    INDEX { bgpNewCfgGroupIndex }
    ::= { bgpNewCfgGroupTable 1 }

BgpNewCfgGroupEntry ::= SEQUENCE {
    bgpNewCfgGroupIndex           Integer32,
    bgpNewCfgGroupName            DisplayString,
    bgpNewCfgGroupRemoteAddr      IpAddress,
    bgpNewCfgGroupRemoteMask      IpAddress,
    bgpNewCfgGroupLimit           INTEGER,
    bgpNewCfgGroupUpdateSrcIf     INTEGER,
    bgpNewCfgGroupUpdateSrcLoopIf INTEGER,
    bgpNewCfgGroupHold            INTEGER,
    bgpNewCfgGroupAlive           INTEGER,
    bgpNewCfgGroupAdvert          INTEGER,
    bgpNewCfgGroupOrig            INTEGER,
    bgpNewCfgGroupMetric          Unsigned32,
    bgpNewCfgGroupTtl             INTEGER,
    bgpNewCfgGroupDefaultAction   INTEGER,
    bgpNewCfgGroupOspfState       INTEGER,
    bgpNewCfgGroupRipState        INTEGER,
    bgpNewCfgGroupFixedState      INTEGER,
    bgpNewCfgGroupStaticState     INTEGER,
    bgpNewCfgGroupInRmapList      OCTET STRING,
    bgpNewCfgGroupOutRmapList     OCTET STRING,
    bgpNewCfgGroupAddInRmap       Integer32,
    bgpNewCfgGroupAddOutRmap      Integer32,
    bgpNewCfgGroupRemoveInRmap    Integer32,
    bgpNewCfgGroupRemoveOutRmap   Integer32,
    bgpNewCfgGroupPassword        DisplayString,
    bgpNewCfgGroupDelete          INTEGER,
    bgpNewCfgGroupState           INTEGER
    , bgpNewCfgGroupTtlSecHops    INTEGER
    , bgpNewCfgGroupNexthopSelf   INTEGER
    , bgpNewCfgGroupClient        INTEGER
    }

bgpNewCfgGroupIndex OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
    "The BGP group number for which the BGP group table is related."
    ::= { bgpNewCfgGroupEntry 1 }

bgpNewCfgGroupName OBJECT-TYPE
    SYNTAX          DisplayString (SIZE(0..32))
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
    "The group name."
    ::= { bgpNewCfgGroupEntry 2 }

bgpNewCfgGroupRemoteAddr OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
    "The IP address of the BGP group."
    ::= { bgpNewCfgGroupEntry 3 }

bgpNewCfgGroupRemoteMask OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
    "The subnet mask of the BGP group."
    ::= { bgpNewCfgGroupEntry 4 }

bgpNewCfgGroupLimit OBJECT-TYPE
    SYNTAX      INTEGER (1..96)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
    " The maximum number of BGP dynamic peers."
    ::= { bgpNewCfgGroupEntry 5 }

bgpNewCfgGroupUpdateSrcIf OBJECT-TYPE
    SYNTAX INTEGER
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "BGP group update source interface index"
    ::= { bgpNewCfgGroupEntry 6 }

bgpNewCfgGroupUpdateSrcLoopIf OBJECT-TYPE
    SYNTAX INTEGER
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "BGP group update source loopback interface index"
    ::= { bgpNewCfgGroupEntry 7 }

bgpNewCfgGroupHold OBJECT-TYPE
    SYNTAX      INTEGER (0..65535)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The hold time"
    ::= { bgpNewCfgGroupEntry 8 }

bgpNewCfgGroupAlive OBJECT-TYPE
    SYNTAX INTEGER  (0..21845)
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
    "The keep alive time"
    ::= { bgpNewCfgGroupEntry 9 }

bgpNewCfgGroupAdvert OBJECT-TYPE
    SYNTAX INTEGER  (1..65535)
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
    "The min time between advertisements"
    ::= { bgpNewCfgGroupEntry 10 }

bgpNewCfgGroupOrig OBJECT-TYPE
    SYNTAX INTEGER  (1..65535)
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
    "The min time between route originations"
    ::= { bgpNewCfgGroupEntry 11 }

bgpNewCfgGroupMetric OBJECT-TYPE
    SYNTAX      Unsigned32 (0..4294967294)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
    "The metric value of the BGP group.  A value of '0' means none"
    ::= { bgpNewCfgGroupEntry 12 }

bgpNewCfgGroupTtl OBJECT-TYPE
    SYNTAX      INTEGER (0..255)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
    "The time-to-live value of the BGP peer IP datagram. 0 means none."
    ::= { bgpNewCfgGroupEntry 13 }

bgpNewCfgGroupDefaultAction OBJECT-TYPE
    SYNTAX INTEGER {
        none(1),
        import(2),
        originate(3),
        redistribute(4)
        }
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
    "The value of default route action."
    ::= { bgpNewCfgGroupEntry 14 }

bgpNewCfgGroupOspfState OBJECT-TYPE
    SYNTAX INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
    "Enable or disable advertising OSPF routes."
    ::= { bgpNewCfgGroupEntry 15 }

bgpNewCfgGroupRipState OBJECT-TYPE
    SYNTAX INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
    "Enable/disable advertising RIP routes"
    ::= { bgpNewCfgGroupEntry 16 }

bgpNewCfgGroupFixedState OBJECT-TYPE
    SYNTAX INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
    "Enable or disable advertising fixed routes."
    ::= { bgpNewCfgGroupEntry 17 }

bgpNewCfgGroupStaticState OBJECT-TYPE
    SYNTAX INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
    "Enable or disable advertising static routes."
    ::= { bgpNewCfgGroupEntry 18 }

bgpNewCfgGroupInRmapList OBJECT-TYPE
    SYNTAX      OCTET STRING
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
    "The route maps present in the in route map list.
     The route maps are presented in a bitmap format.

     in receiving order:

         OCTET 1  OCTET 2  .....
         xxxxxxxx xxxxxxxx .....
         ||    || |_ Rmap 9
         ||    ||
         ||    ||___ Rmap 8
         ||    |____ Rmap 7
         ||      .    .   .
         ||_________ Rmap 2
         |__________ Rmap 1

     where x :  1 - The represented route map is selected
                0 - The represented route map is not selected"
    ::= { bgpNewCfgGroupEntry 19 }

bgpNewCfgGroupOutRmapList OBJECT-TYPE
    SYNTAX      OCTET STRING
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
    "The route maps present in the out route map list.
     The route maps are presented in a bitmap format.

     in receiving order:

         OCTET 1  OCTET 2  .....
         xxxxxxxx xxxxxxxx .....
         ||    || |_ Rmap 9
         ||    ||
         ||    ||___ Rmap 8
         ||    |____ Rmap 7
         ||      .    .   .
         ||_________ Rmap 2
         |__________ Rmap 1

     where x :  1 - The represented route map is selected
                0 - The represented route map is not selected"
    ::= { bgpNewCfgGroupEntry 20 }

bgpNewCfgGroupAddInRmap OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
    "The route map to be add into in-rmap list. When read,
     0 is returned."
    ::= { bgpNewCfgGroupEntry 21 }

bgpNewCfgGroupAddOutRmap OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
    "The route map to be add into out-rmap list. When read,
     0 is returned."
    ::= { bgpNewCfgGroupEntry 22 }

bgpNewCfgGroupRemoveInRmap OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
    "The route map to be removed from out-rmap list. When read,
     0 is returned."
    ::= { bgpNewCfgGroupEntry 23 }

bgpNewCfgGroupRemoveOutRmap OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
    "The route map to be removed from out-rmap list. When read,
     0 is returned."
    ::= { bgpNewCfgGroupEntry 24 }

bgpNewCfgGroupPassword OBJECT-TYPE
    SYNTAX      DisplayString (SIZE(0..16))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
    "Peer BGP password"
    ::= { bgpNewCfgGroupEntry 25 }


bgpNewCfgGroupDelete OBJECT-TYPE
    SYNTAX INTEGER {
        other(1),
        delete(2)
        }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
    "When set to the value of 2 (delete), the entire row is deleted.
     When read, other(1) is returned. Setting the value to anything
     other than 2(delete) has no effect on the state of the row."
    ::= { bgpNewCfgGroupEntry 26 }

bgpNewCfgGroupState OBJECT-TYPE
    SYNTAX INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
    "Enable or disable the group."
    ::= { bgpNewCfgGroupEntry 27 }

bgpNewCfgGroupTtlSecHops OBJECT-TYPE
    SYNTAX      INTEGER (0..254)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
    "The BGP ttl security hops. 0 means none."
    ::= { bgpNewCfgGroupEntry 28 }

bgpNewCfgGroupNexthopSelf OBJECT-TYPE
    SYNTAX INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "Enable/Disable using this router as next-hop in BGP updates."
    ::= { bgpNewCfgGroupEntry 29 }

bgpNewCfgGroupClient OBJECT-TYPE
    SYNTAX INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "Enable/Disable Route Reflector for this client."
    ::= { bgpNewCfgGroupEntry 30 }


bgpCurCfgGroupRASTable OBJECT-TYPE
    SYNTAX SEQUENCE OF BgpCurCfgGroupRASEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
    "The table of BGP group RASs in the current configuration block."
    ::= { bgpCfg 11 }

bgpCurCfgGroupRASEntry OBJECT-TYPE
    SYNTAX      BgpCurCfgGroupRASEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
    "Information about a BGP group RAS."
    INDEX { bgpCurCfgGroupIndex, bgpCurCfgGroupRASIndex }
    ::= { bgpCurCfgGroupRASTable 1 }

BgpCurCfgGroupRASEntry ::= SEQUENCE {
    bgpCurCfgGroupRASIndex      Integer32,
    bgpCurCfgGroupRAS           INTEGER
    } 

bgpCurCfgGroupRASIndex OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
    "The BGP remote-as number for which the BGP RAS table is related."
    ::= { bgpCurCfgGroupRASEntry 1 }

bgpCurCfgGroupRAS OBJECT-TYPE
    SYNTAX INTEGER (0..65535)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The remote AS number of the BGP group bgpCurCfgGroupIndex. 0 means none" 
    ::= { bgpCurCfgGroupRASEntry 2 }

bgpNewCfgGroupRASTable OBJECT-TYPE
    SYNTAX SEQUENCE OF BgpNewCfgGroupRASEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "The table of BGP group RASs in the new configuration block."
    ::= { bgpCfg 12 }

bgpNewCfgGroupRASEntry OBJECT-TYPE
    SYNTAX BgpNewCfgGroupRASEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "Information about a BGP group RAS."
    INDEX { bgpNewCfgGroupIndex, bgpNewCfgGroupRASIndex }
    ::= { bgpNewCfgGroupRASTable 1 }
 
BgpNewCfgGroupRASEntry ::= SEQUENCE {
    bgpNewCfgGroupRASIndex      Integer32,
    bgpNewCfgGroupRAS           INTEGER
}

bgpNewCfgGroupRASIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The BGP group RAS number for which the BGP group RASs table is related."
    ::= { bgpNewCfgGroupRASEntry 1}

bgpNewCfgGroupRAS OBJECT-TYPE
    SYNTAX INTEGER (0..65535) 
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "The remote AS number of the BGP group bgpNewCfgGroupIndex.  0 means none" 
    ::= { bgpNewCfgGroupRASEntry 2 }

bgpInfoGroupTable OBJECT-TYPE
    SYNTAX SEQUENCE OF BgpInfoGroupEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "The table of BGP group in the current configuration block."
    ::= { bgpInfo 4 }

bgpInfoGroupEntry OBJECT-TYPE
    SYNTAX BgpInfoGroupEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "Information about a BGP group."
    INDEX { bgpInfoGroupIndex }
    ::= { bgpInfoGroupTable 1 }

BgpInfoGroupEntry ::= SEQUENCE {
    bgpInfoGroupIndex               Integer32,
    bgpInfoGroupName                DisplayString,
    bgpInfoGroupRemoteAddr          IpAddress,
    bgpInfoGroupRemoteMask          IpAddress,
    bgpInfoGroupLimit               Integer32,
    bgpInfoGroupPeersNum            Integer32,
    bgpInfoGroupState               INTEGER
    }

bgpInfoGroupIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The BGP group number for which the BGP group table is related."
    ::= { bgpInfoGroupEntry 1 }

bgpInfoGroupName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The BGP group nname for which the BGP group table is related."
    ::= { bgpInfoGroupEntry 2 }

bgpInfoGroupRemoteAddr OBJECT-TYPE
    SYNTAX IpAddress
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The remote IP address of the BGP group."
    ::= { bgpInfoGroupEntry 3 }

bgpInfoGroupRemoteMask OBJECT-TYPE  
    SYNTAX IpAddress          
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The remote mask of the BGP group."
    ::= { bgpInfoGroupEntry 4 }

bgpInfoGroupLimit OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The maximum number of BGP dynamic peers."
    ::= { bgpInfoGroupEntry 5 }

bgpInfoGroupPeersNum OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The total number of BGP dynamic peers."
    ::= { bgpInfoGroupEntry 6 }

bgpInfoGroupState OBJECT-TYPE
    SYNTAX INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "BGP group state."
    ::= { bgpInfoGroupEntry 7 }

bgpInfoGroupRASTable OBJECT-TYPE
    SYNTAX SEQUENCE OF BgpInfoGroupRASEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "The table of BGP group RASs in the current configuration block."
    ::= { bgpInfo 5 }

bgpInfoGroupRASEntry OBJECT-TYPE
    SYNTAX BgpInfoGroupRASEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "Information about a BGP group RAS."
    INDEX { bgpInfoGroupIndex, bgpInfoGroupRASIndex }
    ::= { bgpInfoGroupRASTable 1 }

BgpInfoGroupRASEntry ::= SEQUENCE {
    bgpInfoGroupRASIndex         Integer32,
    bgpInfoGroupRAS              INTEGER
    }

bgpInfoGroupRASIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The BGP group RAS number for which the BGP group RAS table is related."
    ::= { bgpInfoGroupRASEntry 1 }

bgpInfoGroupRAS OBJECT-TYPE
    SYNTAX INTEGER
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The remote AS number of the BGP group bgpInfoGroupIndex."
    ::= { bgpInfoGroupRASEntry 2 }

bgpInfoDynamicPeerTable OBJECT-TYPE
    SYNTAX SEQUENCE OF BgpInfoDynamicPeerEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "The table of BGP dynamic peers."
    ::= { bgpInfo 6 }

bgpInfoDynamicPeerEntry OBJECT-TYPE
    SYNTAX BgpInfoDynamicPeerEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "Information about a BGP dynamic peer."
    INDEX { bgpInfoDynamicPeerIndex }
    ::= { bgpInfoDynamicPeerTable 1 }

BgpInfoDynamicPeerEntry ::= SEQUENCE {
    bgpInfoDynamicPeerIndex               Integer32,
    bgpInfoDynamicPeerRemoteAddr          IpAddress,
    bgpInfoDynamicPeerGroup               Integer32,
    bgpInfoDynamicPeerVersion             Integer32,
    bgpInfoDynamicPeerTtl                 Integer32,
    bgpInfoDynamicPeerRemoteAs            Integer32,
    bgpInfoDynamicPeerRouterId            IpAddress,
    bgpInfoDynamicTotalReceivedPackets    Integer32,
    bgpInfoDynamicTotalSentPackets        Integer32,
    bgpInfoDynamicReceivedUpdates         Integer32,
    bgpInfoDynamicSentUpdates             Integer32,
    bgpInfoDynamicKeepalive               Integer32,
    bgpInfoDynamicHoldtime                Integer32,
    bgpInfoDynamicMinAdvTime              Integer32
    }

bgpInfoDynamicPeerIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The BGP dynamic peer number for which the BGP peer table
         is related."
    ::= { bgpInfoDynamicPeerEntry 1 }

bgpInfoDynamicPeerRemoteAddr OBJECT-TYPE
    SYNTAX IpAddress
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The remote IP address of the BGP dynamic peer."
    ::= { bgpInfoDynamicPeerEntry 2 }

bgpInfoDynamicPeerGroup OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The group of BGP dynamic peer."
    ::= { bgpInfoDynamicPeerEntry 3 }

bgpInfoDynamicPeerVersion OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The version negotiated by the BGP dynamic peer."
    ::= { bgpInfoDynamicPeerEntry 4 }

bgpInfoDynamicPeerTtl OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The time-to-live value of the BGP dynamic peer IP datagram."
    ::= { bgpInfoDynamicPeerEntry 5 }

bgpInfoDynamicPeerRemoteAs OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The remote AS number of the BGP dynamic peer."
    ::= { bgpInfoDynamicPeerEntry 6 }

bgpInfoDynamicPeerRouterId OBJECT-TYPE
    SYNTAX IpAddress
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The router IP address."
    ::= { bgpInfoDynamicPeerEntry 7 }

bgpInfoDynamicTotalReceivedPackets OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The total number of received packets."
    ::= { bgpInfoDynamicPeerEntry 8 }

bgpInfoDynamicTotalSentPackets OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The total number of sent packets."
    ::= { bgpInfoDynamicPeerEntry 9 }

bgpInfoDynamicReceivedUpdates OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The number of received updates."
    ::= { bgpInfoDynamicPeerEntry 10 }

bgpInfoDynamicSentUpdates OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The number of sent updates."
    ::= { bgpInfoDynamicPeerEntry 11 }

bgpInfoDynamicKeepalive OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The keep alive time."
    ::= { bgpInfoDynamicPeerEntry 12 }

bgpInfoDynamicHoldtime OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The hold time."
    ::= { bgpInfoDynamicPeerEntry 13 }

bgpInfoDynamicMinAdvTime OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The MinAdvTime."
    ::= { bgpInfoDynamicPeerEntry 14 }

--
-- IP OSPF configuration
--
ospfGeneral OBJECT IDENTIFIER ::= { ospfCfg 1 }

ospfCurCfgDefaultRouteMetric OBJECT-TYPE
    SYNTAX INTEGER (0..16777214)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "Specify the metric to be assigned."
    ::= { ospfGeneral 1 }

ospfNewCfgDefaultRouteMetric OBJECT-TYPE
    SYNTAX INTEGER (0..16777214)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
    "Specify the metric to be assigned."
    ::= { ospfGeneral 2 }

ospfCurCfgDefaultRouteMetricType OBJECT-TYPE
    SYNTAX INTEGER {
        none(1),
        type1(2),
        type2(3)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "Specify the AS External metric type to be assigned."
    ::= { ospfGeneral 3 }

ospfNewCfgDefaultRouteMetricType OBJECT-TYPE
    SYNTAX INTEGER {
        none(1),
        type1(2),
        type2(3)
        }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
    "Specify the AS External metric type to be assigned."
    ::= { ospfGeneral 4 }

ospfIntfTableMaxSize OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The maximum number of rows in the OSPF Interface table."
    ::= { ospfGeneral 5 }

ospfAreaTableMaxSize OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The maximum number of rows in the OSPF Area table."
    ::= { ospfGeneral 6 }

ospfRangeTableMaxSize OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The maximum number of rows in the OSPF Range table."
    ::= { ospfGeneral 7 }

ospfVirtIntfTableMaxSize OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The maximum number of rows in the OSPF Virtual Interface
         table."
    ::= { ospfGeneral 8 }

ospfHostTableMaxSize OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The maximum number of rows in the OSPF Host table."
    ::= { ospfGeneral 9 }

ospfCurCfgState OBJECT-TYPE
    SYNTAX INTEGER {
        on(1),
        off(2)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "OSPF global state."
    ::= { ospfGeneral 10 }

ospfNewCfgState OBJECT-TYPE
    SYNTAX INTEGER {
        on(1),
        off(2)
        }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
    "Globally turn OSPF on or off."
    ::= { ospfGeneral 11 }

ospfCurCfgLSDB OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The LSDB limit for external LSA."
    ::= { ospfGeneral 12 }

ospfNewCfgLSDB OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
    "Set the LSDB limit for external LSA."
    ::= { ospfGeneral 13 }

ospfCurCfgAreaTable OBJECT-TYPE
    SYNTAX SEQUENCE OF OspfCurCfgAreaEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "The table of OSPF area in the current configuration block."
    ::= { ospfCfg 2 }

ospfCurCfgAreaEntry OBJECT-TYPE
    SYNTAX OspfCurCfgAreaEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "Information about a OSPF area."
    INDEX { ospfCurCfgAreaIndex }
    ::= { ospfCurCfgAreaTable 1 }
 
OspfCurCfgAreaEntry ::= SEQUENCE {
    ospfCurCfgAreaIndex         Integer32,
    ospfCurCfgAreaId            IpAddress,
    ospfCurCfgAreaSpfInterval   INTEGER,
    ospfCurCfgAreaAuthType      INTEGER,
    ospfCurCfgAreaType          INTEGER,
    ospfCurCfgAreaMetric    INTEGER,
    ospfCurCfgAreaStatus        INTEGER
    }
 
ospfCurCfgAreaIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The OSPF area number for which the OSPF area table is related."
    ::= { ospfCurCfgAreaEntry 1}

ospfCurCfgAreaId OBJECT-TYPE
    SYNTAX IpAddress 
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The IP Address of the OSPF area." 
    ::= { ospfCurCfgAreaEntry 2 }

ospfCurCfgAreaSpfInterval OBJECT-TYPE
    SYNTAX INTEGER (1..255) 
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The SPF interval for the OSPF area." 
    ::= { ospfCurCfgAreaEntry 3 }

ospfCurCfgAreaAuthType OBJECT-TYPE
    SYNTAX  INTEGER {
        none(1),
        password(2),
    md5(3)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Type of authentication being used.
     none(1) - no authentication
     password(2) - use password
     md5(3) - use MD5 authentication."
    
    ::= { ospfCurCfgAreaEntry 4 }

ospfCurCfgAreaType OBJECT-TYPE
    SYNTAX INTEGER {
        transit(0),
        stub(1),
        nssa(2)
           }
    MAX-ACCESS   read-only
    STATUS  current
    DESCRIPTION
        "Type of Area.
        transit(0)
        stub(1)
        nssa(2)"
           
    ::= { ospfCurCfgAreaEntry 5 }
    
ospfCurCfgAreaMetric OBJECT-TYPE
    SYNTAX  INTEGER (1..65535)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Metric (1-65535)"
    
    ::= { ospfCurCfgAreaEntry 6 }

ospfCurCfgAreaStatus OBJECT-TYPE
    SYNTAX  INTEGER {
        disabled(0), 
     enabled(1)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Status
       disabled(0)
       enabled(1)"
    
    ::= { ospfCurCfgAreaEntry 7 }

ospfNewCfgAreaTable OBJECT-TYPE
    SYNTAX SEQUENCE OF OspfNewCfgAreaEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "The table of OSPF area in the new configuration block."
    ::= { ospfCfg 3 }

ospfNewCfgAreaEntry OBJECT-TYPE
    SYNTAX OspfNewCfgAreaEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "Information about a OSPF area."
    INDEX { ospfNewCfgAreaIndex }
    ::= { ospfNewCfgAreaTable 1 }
 
OspfNewCfgAreaEntry ::= SEQUENCE {
    ospfNewCfgAreaIndex         Integer32,
    ospfNewCfgAreaId            IpAddress, 
    ospfNewCfgAreaSpfInterval   INTEGER,
    ospfNewCfgAreaAuthType      INTEGER,    
    ospfNewCfgAreaType          INTEGER,
    ospfNewCfgAreaMetric    INTEGER,
    ospfNewCfgAreaStatus        INTEGER,
    ospfNewCfgAreaDelete        INTEGER 
    }
 
ospfNewCfgAreaIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only 
    STATUS current
    DESCRIPTION
    "The OSPF area number for which the OSPF area table is related."
    ::= { ospfNewCfgAreaEntry 1}

ospfNewCfgAreaId OBJECT-TYPE
    SYNTAX IpAddress 
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "The IP Address of the OSPF area." 
    ::= { ospfNewCfgAreaEntry 2 }

ospfNewCfgAreaSpfInterval OBJECT-TYPE
    SYNTAX INTEGER (1..255) 
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "The SPF interval for the OSPF area." 
    ::= { ospfNewCfgAreaEntry 3 }

ospfNewCfgAreaAuthType OBJECT-TYPE
    SYNTAX  INTEGER {
        none(1),
        password(2),
    md5(3)
        }
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "Type of authentication being used.
     none(1) - no authentication
     password(2) - use password.
         md5(3) - use MD5 authentication."
    ::= { ospfNewCfgAreaEntry 4 }

ospfNewCfgAreaType OBJECT-TYPE
    SYNTAX INTEGER {
        transit(0),
        stub(1),
        nssa(2)
           }
    MAX-ACCESS   read-write
    STATUS  current
    DESCRIPTION
        "Type of Area.
        transit(0)
        stub(1)
           nssa(2)"
           
    ::= { ospfNewCfgAreaEntry 5 }
    
ospfNewCfgAreaMetric OBJECT-TYPE
    SYNTAX  INTEGER (1..65535)
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Metric (1-65535)"
    
    ::= { ospfNewCfgAreaEntry 6 }

ospfNewCfgAreaStatus OBJECT-TYPE
    SYNTAX  INTEGER {
        disabled(0), 
     enabled(1)
        }
    MAX-ACCESS  read-write
    STATUS current
    DESCRIPTION
        "Status
       disabled(0)
       enabled(1)"
    
    ::= { ospfNewCfgAreaEntry 7 }

ospfNewCfgAreaDelete OBJECT-TYPE
   SYNTAX INTEGER {
    no(0),
    yes(1)
    }
   MAX-ACCESS read-write
   STATUS current
   DESCRIPTION
    "Delete the area
        no(0),
            yes(1)"

    ::= { ospfNewCfgAreaEntry 8 }


-- OSPF Host Table

ospfCurCfgHostTable OBJECT-TYPE
    SYNTAX SEQUENCE OF OspfCurCfgHostEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "The table of OSPF Host configuration."
    ::= { ospfCfg 12 }

ospfCurCfgHostEntry OBJECT-TYPE
    SYNTAX OspfCurCfgHostEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "Information about a OSPF host."
    INDEX { ospfCurCfgHostIndex }
    ::= { ospfCurCfgHostTable 1 }
 
OspfCurCfgHostEntry ::= SEQUENCE {
    ospfCurCfgHostIndex         Integer32,
    ospfCurCfgHostIpAddr        IpAddress,
    ospfCurCfgHostAreaIndex     Integer32,
    ospfCurCfgHostCost          INTEGER,
    ospfCurCfgHostState     INTEGER
    }
 
ospfCurCfgHostIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The OSPF host number for which the OSPF host table is related."
    ::= { ospfCurCfgHostEntry 1}

ospfCurCfgHostIpAddr OBJECT-TYPE
    SYNTAX IpAddress 
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The IP Address of the OSPF host." 
    ::= { ospfCurCfgHostEntry 2 }

ospfCurCfgHostAreaIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The area index."
    ::= { ospfCurCfgHostEntry 3 }

ospfCurCfgHostCost OBJECT-TYPE
    SYNTAX  INTEGER (1..65535)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The cost of the OSPF host."
    ::= { ospfCurCfgHostEntry 4 }

ospfCurCfgHostState OBJECT-TYPE
    SYNTAX  INTEGER  {
    enabled(2),
    disabled(3)
    }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable an OSPF Host"
    ::= { ospfCurCfgHostEntry 5 }

ospfNewCfgHostTable OBJECT-TYPE
    SYNTAX SEQUENCE OF OspfNewCfgHostEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "The table of OSPF Host configuration."
    ::= { ospfCfg 13 }

ospfNewCfgHostEntry OBJECT-TYPE
    SYNTAX OspfNewCfgHostEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "Information about a OSPF host."
    INDEX { ospfNewCfgHostIndex }
    ::= { ospfNewCfgHostTable 1 }
 
OspfNewCfgHostEntry ::= SEQUENCE {
    ospfNewCfgHostIndex         Integer32,
    ospfNewCfgHostIpAddr        IpAddress, 
    ospfNewCfgHostAreaIndex     Integer32,
    ospfNewCfgHostCost          INTEGER,
    ospfNewCfgHostState     INTEGER,
    ospfNewCfgHostDelete        INTEGER
    }
 
ospfNewCfgHostIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only 
    STATUS current
    DESCRIPTION
    "The OSPF host number for which the OSPF host table is related."
    ::= { ospfNewCfgHostEntry 1}

ospfNewCfgHostIpAddr OBJECT-TYPE
    SYNTAX IpAddress 
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "The IP Address of the OSPF host." 
    ::= { ospfNewCfgHostEntry 2 }

ospfNewCfgHostAreaIndex OBJECT-TYPE
    SYNTAX Integer32 
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "The OSPF area index."
    ::= { ospfNewCfgHostEntry 3 }

ospfNewCfgHostCost OBJECT-TYPE
    SYNTAX  INTEGER (1..65535)
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "The cost of the OSPF host."
    ::= { ospfNewCfgHostEntry 4 }

ospfNewCfgHostState OBJECT-TYPE
    SYNTAX  INTEGER  {
    enabled(2),
    disabled(3)
    }
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "Enable or disable an OSPF Host"
    ::= { ospfNewCfgHostEntry 5 }

ospfNewCfgHostDelete  OBJECT-TYPE
    SYNTAX  INTEGER {
        no(0),
        yes(1)
        }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
    "Delete the OSPF host:
         no(0),
         yes(1)" 
    ::= { ospfNewCfgHostEntry 6 }

ospfMdkeyTableMaxSize OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The maximum number of rows in the OSPF Mdkey table."
    ::= { ospfCfg 11 }

ospfCurCfgMdkeyTable OBJECT-TYPE
    SYNTAX SEQUENCE OF OspfCurCfgMdkeyEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "The table of OSPF MD5 keys in the current configuration block."
    ::= { ospfCfg 5 }

ospfCurCfgMdkeyEntry OBJECT-TYPE
    SYNTAX OspfCurCfgMdkeyEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "Information about an OSPF MD keys table."
    INDEX { ospfCurCfgMdkeyIndex }
    ::= { ospfCurCfgMdkeyTable 1 }
 
OspfCurCfgMdkeyEntry ::= SEQUENCE {
    ospfCurCfgMdkeyIndex        Integer32,
    ospfCurCfgMdkeyKey          DisplayString
    }
 
ospfCurCfgMdkeyIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only 
    STATUS current
    DESCRIPTION
    "The OSPF MD5 Key number for which the OSPF MdKey table is related."
    ::= { ospfCurCfgMdkeyEntry 1}

ospfCurCfgMdkeyKey OBJECT-TYPE
    SYNTAX DisplayString (SIZE(0..16)) 
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The character string representing the MD5 Key." 
    ::= { ospfCurCfgMdkeyEntry 2 }

ospfNewCfgMdkeyTable OBJECT-TYPE
    SYNTAX SEQUENCE OF OspfNewCfgMdkeyEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "The table of OSPF MD5 keys in the new configuration block."
    ::= { ospfCfg 6 }

ospfNewCfgMdkeyEntry OBJECT-TYPE
    SYNTAX OspfNewCfgMdkeyEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "Information about an OSPF MD keys table."
    INDEX { ospfNewCfgMdkeyIndex }
    ::= { ospfNewCfgMdkeyTable 1 }
 
OspfNewCfgMdkeyEntry ::= SEQUENCE {
    ospfNewCfgMdkeyIndex        Integer32,
    ospfNewCfgMdkeyKey          DisplayString,
    ospfNewCfgMdkeyDelete       INTEGER 
    }
 
ospfNewCfgMdkeyIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only 
    STATUS current
    DESCRIPTION
    "The OSPF MD5 Key number for which the OSPF MdKey table is related."
    ::= { ospfNewCfgMdkeyEntry 1}

ospfNewCfgMdkeyKey OBJECT-TYPE
    SYNTAX DisplayString (SIZE(0..16)) 
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "The character string representing the MD5 Key." 
    ::= { ospfNewCfgMdkeyEntry 2 }

ospfNewCfgMdkeyDelete OBJECT-TYPE
    SYNTAX  INTEGER { 
    other(1),
        delete(2)
    }
    MAX-ACCESS read-create 
    STATUS current
    DESCRIPTION
    "When set to the value of 2 (delete), the entire row is deleted. 
     When read, other(1) is returned. Setting the value to anything 
     other than 2(delete) has no effect on the state of the row."
    ::= { ospfNewCfgMdkeyEntry 3}


ospfCurCfgIntfTable OBJECT-TYPE
    SYNTAX SEQUENCE OF OspfCurCfgIntfEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "The table of OSPF Interface in the current configuration block."
    ::= { ospfCfg 7 }

ospfCurCfgIntfEntry OBJECT-TYPE
    SYNTAX OspfCurCfgIntfEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "Information about an OSPF Interface."
    INDEX { ospfCurCfgIntfIndex }
    ::= { ospfCurCfgIntfTable 1 }
 
OspfCurCfgIntfEntry ::= SEQUENCE {
    ospfCurCfgIntfIndex         Integer32,
    ospfCurCfgIntfArea          INTEGER,
    ospfCurCfgIntfMdkey         INTEGER, 
    ospfCurCfgIntfCost          INTEGER,
    ospfCurCfgIntfPrio          INTEGER,
    ospfCurCfgIntfHello         INTEGER,
    ospfCurCfgIntfHelloMS         INTEGER,
    ospfCurCfgIntfDead          INTEGER,
    ospfCurCfgIntfDeadMS        INTEGER,
    ospfCurCfgIntfTrans         INTEGER,
    ospfCurCfgIntfRetra         INTEGER,
    ospfCurCfgIntfAuthKey       DisplayString,
    ospfCurCfgIntfPassive       INTEGER,
    ospfCurCfgIntfPtop          INTEGER,
    ospfCurCfgIntfStatus        INTEGER
    }
 
ospfCurCfgIntfIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The OSPF Interface number for which the OSPF Interface table is 
         related."
    ::= { ospfCurCfgIntfEntry 1}

ospfCurCfgIntfArea OBJECT-TYPE
    SYNTAX INTEGER (0..5) 
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The index of the area that the interface belongs (0..5)"
    ::= { ospfCurCfgIntfEntry 2 }

ospfCurCfgIntfMdkey OBJECT-TYPE
    SYNTAX INTEGER (0..255) 
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The MD5 key for the OSPF interface
         0 (none) no MD5 authentication." 
    ::= { ospfCurCfgIntfEntry 3 }

ospfCurCfgIntfCost  OBJECT-TYPE 
    SYNTAX INTEGER (1..65535) 
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "Interface cost" 
    ::= { ospfCurCfgIntfEntry 4 }

ospfCurCfgIntfPrio   OBJECT-TYPE
   SYNTAX INTEGER (1..255) 
    MAX-ACCESS read-only
    STATUS current 
    DESCRIPTION
    "Interface router priority" 
    ::= { ospfCurCfgIntfEntry 5 }

ospfCurCfgIntfHello  OBJECT-TYPE 
    SYNTAX INTEGER (1..65535) 
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "Hello interval" 
    ::= { ospfCurCfgIntfEntry 6 }

ospfCurCfgIntfHelloMS  OBJECT-TYPE
    SYNTAX  INTEGER {
        seconds(0),
        milliseconds(1)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "Units of time measurement for Hello interval
    seconds(0),
        milliseconds(1)" 
    ::= { ospfCurCfgIntfEntry 7 }

ospfCurCfgIntfDead   OBJECT-TYPE
   SYNTAX INTEGER (1..65535) 
    MAX-ACCESS read-only
    STATUS current 
    DESCRIPTION
    "Dead interval" 
    ::= { ospfCurCfgIntfEntry 8 }

ospfCurCfgIntfDeadMS  OBJECT-TYPE
    SYNTAX  INTEGER {
        seconds(0),
        milliseconds(1)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "Units of time measurement for Dead interval
    seconds(0),
        milliseconds(1)" 
    ::= { ospfCurCfgIntfEntry 9 }

ospfCurCfgIntfTrans  OBJECT-TYPE
   SYNTAX INTEGER (1..3600) 
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "Transit delay" 
    ::= { ospfCurCfgIntfEntry 10 }
    
ospfCurCfgIntfRetra OBJECT-TYPE
    SYNTAX INTEGER (1..3600) 
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "Retransmit interval" 
    ::= { ospfCurCfgIntfEntry 11 }

ospfCurCfgIntfAuthKey OBJECT-TYPE  
   SYNTAX DisplayString (SIZE(0..8))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "Authentication Key" 
    ::= { ospfCurCfgIntfEntry 12 }

ospfCurCfgIntfPassive  OBJECT-TYPE
    SYNTAX  INTEGER {
        disabled(0),
        enabled(1)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "Passive interface
    disabled(0),
        enabled(1)" 
    ::= { ospfCurCfgIntfEntry 13 }

ospfCurCfgIntfPtop  OBJECT-TYPE
    SYNTAX  INTEGER {
        disabled(0),
        enabled(1)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "Point-to-point interface
    disabled(0),
        enabled(1)" 
    ::= { ospfCurCfgIntfEntry 15 }

ospfCurCfgIntfStatus  OBJECT-TYPE
    SYNTAX  INTEGER {
        disabled(0),
        enabled(1)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "Status of the interface
    disabled(0),
        enabled(1)" 
    ::= { ospfCurCfgIntfEntry 14 }

ospfNewCfgIntfTable OBJECT-TYPE
    SYNTAX SEQUENCE OF OspfNewCfgIntfEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "The table of OSPF interface in the new configuration block."
    ::= { ospfCfg 8 }

ospfNewCfgIntfEntry OBJECT-TYPE
    SYNTAX OspfNewCfgIntfEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "Information about an OSPF interface."
    INDEX { ospfNewCfgIntfIndex }
    ::= { ospfNewCfgIntfTable 1 }

OspfNewCfgIntfEntry ::= SEQUENCE {
    ospfNewCfgIntfIndex         Integer32,
    ospfNewCfgIntfArea          INTEGER,
    ospfNewCfgIntfMdkey         INTEGER,
    ospfNewCfgIntfCost      INTEGER,
    ospfNewCfgIntfPrio      INTEGER,
    ospfNewCfgIntfHello         INTEGER,
    ospfNewCfgIntfHelloMS       INTEGER,
    ospfNewCfgIntfDead          INTEGER,
    ospfNewCfgIntfDeadMS        INTEGER,
    ospfNewCfgIntfTrans         INTEGER,
    ospfNewCfgIntfRetra         INTEGER,
    ospfNewCfgIntfAuthKey       DisplayString,
    ospfNewCfgIntfPassive       INTEGER,
    ospfNewCfgIntfPtop          INTEGER, 
    ospfNewCfgIntfStatus        INTEGER, 
    ospfNewCfgIntfDelete        INTEGER
    }
 
ospfNewCfgIntfIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The OSPF Interface number for which the OSPF Interface table is 
         related."
    ::= { ospfNewCfgIntfEntry 1}

ospfNewCfgIntfArea OBJECT-TYPE
    SYNTAX INTEGER (0..5) 
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "The index of the area that the interface belongs (0..5)" 
    ::= { ospfNewCfgIntfEntry 2 }

ospfNewCfgIntfMdkey OBJECT-TYPE
    SYNTAX INTEGER (0..255) 
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "The MD5 key for the OSPF interface
         0 (none) no MD5 authentication." 
    ::= { ospfNewCfgIntfEntry 3 }

ospfNewCfgIntfCost  OBJECT-TYPE 
    SYNTAX INTEGER (1..65535) 
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "Interface cost(1..65535)" 
    ::= { ospfNewCfgIntfEntry 4 }

ospfNewCfgIntfPrio   OBJECT-TYPE
   SYNTAX INTEGER (0..255) 
    MAX-ACCESS read-create
    STATUS current 
    DESCRIPTION
    "Interface router priority(0..255)" 
    ::= { ospfNewCfgIntfEntry 5 }


ospfNewCfgIntfHello  OBJECT-TYPE 
    SYNTAX INTEGER (1..65535) 
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "Hello interval(1..65535s | 50..65535ms)"
    ::= { ospfNewCfgIntfEntry 6 }


ospfNewCfgIntfHelloMS  OBJECT-TYPE
    SYNTAX  INTEGER {
        seconds(0),
        milliseconds(1)
        }
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "Units of time measurement for Hello interval
    seconds(0),
        milliseconds(1)" 
    ::= { ospfNewCfgIntfEntry 7 }

ospfNewCfgIntfDead   OBJECT-TYPE
   SYNTAX INTEGER (1..65535) 
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "Dead interval(1..65535s |1000..65535ms)"
    ::= { ospfNewCfgIntfEntry 8 }

ospfNewCfgIntfDeadMS  OBJECT-TYPE
    SYNTAX  INTEGER {
        seconds(0),
        milliseconds(1)
        }
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "Units of time measurement for Dead interval
    seconds(0),
        milliseconds(1)" 
    ::= { ospfNewCfgIntfEntry 9 }

ospfNewCfgIntfTrans  OBJECT-TYPE
   SYNTAX INTEGER (1..3600) 
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "Transit delay(1..3600)" 
    ::= { ospfNewCfgIntfEntry 10 }

ospfNewCfgIntfRetra OBJECT-TYPE
  SYNTAX INTEGER (1..3600) 
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "Retransmit interval(1..3600)" 
    ::= { ospfNewCfgIntfEntry 11 }

ospfNewCfgIntfAuthKey OBJECT-TYPE  
   SYNTAX DisplayString (SIZE(0..8))
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "Authentication Key" 
    ::= { ospfNewCfgIntfEntry 12 }

ospfNewCfgIntfPassive  OBJECT-TYPE
    SYNTAX  INTEGER {
        disabled(0),
        enabled(1)
        }
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "Passive interface
    disabled(0),
        enabled(1)" 
    ::= { ospfNewCfgIntfEntry 13 }

ospfNewCfgIntfPtop  OBJECT-TYPE
    SYNTAX  INTEGER {
        disabled(0),
        enabled(1)
        }
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "Point-to-point interface
    disabled(0),
        enabled(1)" 
    ::= { ospfNewCfgIntfEntry 16 }

ospfNewCfgIntfStatus  OBJECT-TYPE
    SYNTAX  INTEGER {
        disabled(0),
        enabled(1)
        }
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "Status of the interface
    disabled(0),
        enabled(1)" 
    ::= { ospfNewCfgIntfEntry 14 }

ospfNewCfgIntfDelete  OBJECT-TYPE
    SYNTAX  INTEGER {
        other(0),
        delete(1)
        }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
    "Delete the interface
         other(0),
         delete(1)" 
    ::= { ospfNewCfgIntfEntry 15 }

ospfCurCfgLoopIfTable OBJECT-TYPE
    SYNTAX SEQUENCE OF OspfCurCfgLoopIfEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "The table of OSPF Loopback Interfaces 
       in the current configuration block."
    ::= { ospfCfg 20 }

ospfCurCfgLoopIfEntry OBJECT-TYPE
    SYNTAX OspfCurCfgLoopIfEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "Information about an OSPF Loopback Interface."
    INDEX { ospfCurCfgLoopIfIndex }
    ::= { ospfCurCfgLoopIfTable 1 }

OspfCurCfgLoopIfEntry ::= SEQUENCE {
    ospfCurCfgLoopIfIndex         Integer32,
    ospfCurCfgLoopIfArea          INTEGER,
    ospfCurCfgLoopIfStatus        INTEGER
    }

ospfCurCfgLoopIfIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The OSPF Loopback Interface number for which 
         the OSPF Interface table is related."
    ::= { ospfCurCfgLoopIfEntry 1}

ospfCurCfgLoopIfArea OBJECT-TYPE
    SYNTAX INTEGER 
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The index of the area that the loopback interface belongs"
    ::= { ospfCurCfgLoopIfEntry 2 }

ospfCurCfgLoopIfStatus  OBJECT-TYPE
    SYNTAX  INTEGER {
        disabled(0),
        enabled(1)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Status of the loopback interface
        disabled(0),
        enabled(1)"
    ::= { ospfCurCfgLoopIfEntry 3 }

ospfNewCfgLoopIfTable OBJECT-TYPE
    SYNTAX SEQUENCE OF OspfNewCfgLoopIfEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "The table of OSPF loopback interface in the new configuration block."
    ::= { ospfCfg 21 }

ospfNewCfgLoopIfEntry OBJECT-TYPE
    SYNTAX OspfNewCfgLoopIfEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "Information about an OSPF loopback interface."
    INDEX { ospfNewCfgLoopIfIndex }
    ::= { ospfNewCfgLoopIfTable 1 }

OspfNewCfgLoopIfEntry ::= SEQUENCE {
    ospfNewCfgLoopIfIndex         Integer32,
    ospfNewCfgLoopIfArea          INTEGER,
    ospfNewCfgLoopIfStatus        INTEGER,
    ospfNewCfgLoopIfDelete        INTEGER
    }

ospfNewCfgLoopIfIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The OSPF loopback interface number for which 
         the OSPF Loopback Interface table is related."
    ::= { ospfNewCfgLoopIfEntry 1}

ospfNewCfgLoopIfArea OBJECT-TYPE
    SYNTAX INTEGER (0..5)
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "The index of the area that the loopback interface belongs (0..5)"
    ::= { ospfNewCfgLoopIfEntry 2 }

ospfNewCfgLoopIfStatus  OBJECT-TYPE
    SYNTAX  INTEGER {
        disabled(0),
        enabled(1)
        }
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "Status of the loopback interface
        disabled(0),
        enabled(1)"
    ::= { ospfNewCfgLoopIfEntry 3 }

ospfNewCfgLoopIfDelete  OBJECT-TYPE
    SYNTAX  INTEGER {
        other(0),
        delete(1)
        }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Delete the loopback interface
         other(0),
         delete(1)"
    ::= { ospfNewCfgLoopIfEntry 4 }

ospfCurCfgVirtIntfTable OBJECT-TYPE
    SYNTAX SEQUENCE OF OspfCurCfgVirtIntfEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "The table of OSPF Virtual Interface configuration in the current 
       configuration."
    ::= { ospfCfg 9 }

ospfCurCfgVirtIntfEntry OBJECT-TYPE
    SYNTAX OspfCurCfgVirtIntfEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "Information about an OSPF virtual Interface."
    INDEX { ospfCurCfgVirtIntfIndex }
    ::= { ospfCurCfgVirtIntfTable 1 }
 
OspfCurCfgVirtIntfEntry ::= SEQUENCE {
    ospfCurCfgVirtIntfIndex         Integer32,
    ospfCurCfgVirtIntfAreaId        INTEGER,
    ospfCurCfgVirtIntfNbr           IpAddress,
    ospfCurCfgVirtIntfMdkey         INTEGER,
    ospfCurCfgVirtIntfHello         INTEGER,
    ospfCurCfgVirtIntfHelloMS       INTEGER,
    ospfCurCfgVirtIntfDead          INTEGER,
    ospfCurCfgVirtIntfDeadMS        INTEGER,
    ospfCurCfgVirtIntfTrans         INTEGER,
    ospfCurCfgVirtIntfRetra         INTEGER,
    ospfCurCfgVirtIntfAuthKey       DisplayString,
    ospfCurCfgVirtIntfStatus        INTEGER 
    }
 
ospfCurCfgVirtIntfIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The OSPF Virtual Interface number for which the OSPF 
         Virtual Interface table is related."
    ::= { ospfCurCfgVirtIntfEntry 1}

ospfCurCfgVirtIntfAreaId OBJECT-TYPE
    SYNTAX INTEGER (0..5) 
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The index of the OSPF area to which this virtual interface
         belongs." 
    ::= { ospfCurCfgVirtIntfEntry 2 }

ospfCurCfgVirtIntfNbr OBJECT-TYPE
    SYNTAX IpAddress 
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The IP Address of the OSPF neighbor for this virtual interface."
    ::= { ospfCurCfgVirtIntfEntry 3 }

ospfCurCfgVirtIntfMdkey OBJECT-TYPE
    SYNTAX INTEGER (0..255) 
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The MD5 key for the OSPF virtual interface
         0 (none) no MD5 authentication." 
    ::= { ospfCurCfgVirtIntfEntry 4 }

ospfCurCfgVirtIntfHello  OBJECT-TYPE 
    SYNTAX INTEGER (1..65535) 
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "Hello interval" 
    ::= { ospfCurCfgVirtIntfEntry 5 }

ospfCurCfgVirtIntfHelloMS  OBJECT-TYPE
    SYNTAX  INTEGER {
        seconds(0),
        milliseconds(1)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "Units of time measurement for Hello interval
     seconds(0),
        milliseconds(1)" 
    ::= { ospfCurCfgVirtIntfEntry 6 }

ospfCurCfgVirtIntfDead   OBJECT-TYPE
   SYNTAX INTEGER (1..65535) 
    MAX-ACCESS read-only
    STATUS current 
    DESCRIPTION
    "Dead interval" 
    ::= { ospfCurCfgVirtIntfEntry 7 }

ospfCurCfgVirtIntfDeadMS  OBJECT-TYPE
    SYNTAX  INTEGER {
        seconds(0),
        milliseconds(1)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "Units of time measurement for Dead interval
     seconds(0),
        milliseconds(1)" 
    ::= { ospfCurCfgVirtIntfEntry 8 }

ospfCurCfgVirtIntfTrans  OBJECT-TYPE
   SYNTAX INTEGER (1..3600) 
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "Transit delay" 
    ::= { ospfCurCfgVirtIntfEntry 9 }
    

ospfCurCfgVirtIntfRetra OBJECT-TYPE
    SYNTAX INTEGER (1..3600) 
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "Retransmit interval" 
    ::= { ospfCurCfgVirtIntfEntry 10 }

ospfCurCfgVirtIntfAuthKey OBJECT-TYPE  
   SYNTAX DisplayString (SIZE(0..8))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "Authentication Key" 
    ::= { ospfCurCfgVirtIntfEntry 11 }
 
    
ospfCurCfgVirtIntfStatus  OBJECT-TYPE
    SYNTAX  INTEGER {
        disabled(0),
        enabled(1)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "Status
     disabled(0),
        enabled(1)" 
    ::= { ospfCurCfgVirtIntfEntry 12 }

ospfNewCfgVirtIntfTable OBJECT-TYPE
    SYNTAX SEQUENCE OF OspfNewCfgVirtIntfEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "The table of OSPF Virtual interface in the new configuration block."
    ::= { ospfCfg 10 }

ospfNewCfgVirtIntfEntry OBJECT-TYPE
    SYNTAX OspfNewCfgVirtIntfEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "Information about an OSPF virtual interface."
    INDEX { ospfNewCfgVirtIntfIndex }
    ::= { ospfNewCfgVirtIntfTable 1 }
 
OspfNewCfgVirtIntfEntry ::= SEQUENCE {
    ospfNewCfgVirtIntfIndex         Integer32,
    ospfNewCfgVirtIntfAreaId        INTEGER,
    ospfNewCfgVirtIntfNbr           IpAddress,
    ospfNewCfgVirtIntfMdkey         INTEGER,
    ospfNewCfgVirtIntfHello         INTEGER,
    ospfNewCfgVirtIntfHelloMS       INTEGER,
    ospfNewCfgVirtIntfDead          INTEGER,
    ospfNewCfgVirtIntfDeadMS        INTEGER,
    ospfNewCfgVirtIntfTrans         INTEGER,
    ospfNewCfgVirtIntfRetra         INTEGER,
    ospfNewCfgVirtIntfAuthKey       DisplayString,
    ospfNewCfgVirtIntfStatus        INTEGER, 
    ospfNewCfgVirtIntfDelete        INTEGER
    }
 
ospfNewCfgVirtIntfIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The OSPF Virtual Interface number for which the OSPF 
         Virtual Interface table is related."
    ::= { ospfNewCfgVirtIntfEntry 1}

ospfNewCfgVirtIntfAreaId OBJECT-TYPE
    SYNTAX INTEGER (0..5)
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "The index of the OSPF area to which this virtual interface
         belongs." 
    ::= { ospfNewCfgVirtIntfEntry 2 }

ospfNewCfgVirtIntfNbr OBJECT-TYPE
    SYNTAX IpAddress 
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "The IP Address of the OSPF neighbor for this virtual interface."
    ::= { ospfNewCfgVirtIntfEntry 3 }

ospfNewCfgVirtIntfMdkey OBJECT-TYPE
    SYNTAX INTEGER (0..255) 
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "The MD5 key for the OSPF virtual interface
         0 (none) no MD5 authentication." 
    ::= { ospfNewCfgVirtIntfEntry 4 }

ospfNewCfgVirtIntfHello  OBJECT-TYPE 
    SYNTAX INTEGER (1..65535) 
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "Hello interval(1..65535s | 50..65535ms)"
    ::= { ospfNewCfgVirtIntfEntry 5 }

ospfNewCfgVirtIntfHelloMS  OBJECT-TYPE
    SYNTAX  INTEGER {
        seconds(0),
        milliseconds(1)
        }
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "Units of time measurement fo Hello interval 
         seconds(0),
         milliseconds(1) " 
    ::= { ospfNewCfgVirtIntfEntry 6 }

ospfNewCfgVirtIntfDead   OBJECT-TYPE
   SYNTAX INTEGER (1..65535) 
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "Dead interval(1..65535s | 1000..65535ms)"
    ::= { ospfNewCfgVirtIntfEntry 7 }

ospfNewCfgVirtIntfDeadMS  OBJECT-TYPE
    SYNTAX  INTEGER {
        seconds(0),
        milliseconds(1)
        }
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "Units of time measurement fo Dead interval 
         seconds(0),
         milliseconds(1) " 
    ::= { ospfNewCfgVirtIntfEntry 8 }

ospfNewCfgVirtIntfTrans  OBJECT-TYPE
   SYNTAX INTEGER (1..3600) 
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "Transit delay(1..3600)" 
    ::= { ospfNewCfgVirtIntfEntry 9 }
    

ospfNewCfgVirtIntfRetra OBJECT-TYPE
  SYNTAX INTEGER (1..3600) 
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "Retransmit interval(1..3600)" 
    ::= { ospfNewCfgVirtIntfEntry 10 }


ospfNewCfgVirtIntfAuthKey OBJECT-TYPE  
   SYNTAX DisplayString (SIZE(0..8))
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "Authentication Key SIZE(0..8)" 
    ::= { ospfNewCfgVirtIntfEntry 11 }
     
ospfNewCfgVirtIntfStatus  OBJECT-TYPE
    SYNTAX  INTEGER {
        disabled(0),
        enabled(1)
        }
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "Status 
         disabled(0),
         enabled(1) " 
    ::= { ospfNewCfgVirtIntfEntry 12 }
      
ospfNewCfgVirtIntfDelete  OBJECT-TYPE
    SYNTAX  INTEGER {
        other(0),
        delete(1)
        }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
    "Delete
     other(0),
         delete(1)" 
    ::= { ospfNewCfgVirtIntfEntry 13 }


-- ospf range

ospfCurCfgRangeTable OBJECT-TYPE
    SYNTAX SEQUENCE OF OspfCurCfgRangeEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "The table of OSPF summary range in the current configuration." 
    ::= { ospfCfg 14 }

ospfCurCfgRangeEntry OBJECT-TYPE
    SYNTAX OspfCurCfgRangeEntry 
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "Information about an OSPF summary range."
    INDEX { ospfCurCfgRangeIndex }
    ::= { ospfCurCfgRangeTable 1 }
 
OspfCurCfgRangeEntry ::= SEQUENCE {
    ospfCurCfgRangeIndex            Integer32,
    ospfCurCfgRangeAddr             IpAddress,
    ospfCurCfgRangeMask             IpAddress,
    ospfCurCfgRangeAreaIndex        Integer32,
    ospfCurCfgRangeHideState        INTEGER,
    ospfCurCfgRangeState            INTEGER
    }
 
ospfCurCfgRangeIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The range number for which the OSPF summary range table is related." 
    ::= { ospfCurCfgRangeEntry 1}

ospfCurCfgRangeAddr OBJECT-TYPE
    SYNTAX IpAddress 
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The IP Address of the range." 
    ::= { ospfCurCfgRangeEntry 2 }

ospfCurCfgRangeMask OBJECT-TYPE
    SYNTAX IpAddress 
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The mask of the range."
    ::= { ospfCurCfgRangeEntry 3 }

ospfCurCfgRangeAreaIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The area index."
    ::= { ospfCurCfgRangeEntry 4 }

ospfCurCfgRangeHideState OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The state of the hide range."
    ::= { ospfCurCfgRangeEntry 5 }

ospfCurCfgRangeState OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The state of the range."
    ::= { ospfCurCfgRangeEntry 6 }

ospfNewCfgRangeTable OBJECT-TYPE
    SYNTAX SEQUENCE OF OspfNewCfgRangeEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "The table of OSPF summary range in the new configuration." 
    ::= { ospfCfg 15 }

ospfNewCfgRangeEntry OBJECT-TYPE
    SYNTAX OspfNewCfgRangeEntry 
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "Information about an OSPF summary range."
    INDEX { ospfNewCfgRangeIndex }
    ::= { ospfNewCfgRangeTable 1 }
 
OspfNewCfgRangeEntry ::= SEQUENCE {
    ospfNewCfgRangeIndex            Integer32,
    ospfNewCfgRangeAddr             IpAddress,
    ospfNewCfgRangeMask             IpAddress,
    ospfNewCfgRangeAreaIndex        Integer32,
    ospfNewCfgRangeHideState        INTEGER,
    ospfNewCfgRangeState            INTEGER,
    ospfNewCfgRangeDelete           INTEGER
    }
 
ospfNewCfgRangeIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The range number for which the OSPF summary range table is related." 
    ::= { ospfNewCfgRangeEntry 1}

ospfNewCfgRangeAddr OBJECT-TYPE
    SYNTAX IpAddress 
    MAX-ACCESS read-create 
    STATUS current
    DESCRIPTION
    "The IP Address of the range." 
    ::= { ospfNewCfgRangeEntry 2 }

ospfNewCfgRangeMask OBJECT-TYPE
    SYNTAX IpAddress 
    MAX-ACCESS read-create 
    STATUS current
    DESCRIPTION
    "The mask of the range."
    ::= { ospfNewCfgRangeEntry 3 }

ospfNewCfgRangeAreaIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-create 
    STATUS current
    DESCRIPTION
        "The area index."
    ::= { ospfNewCfgRangeEntry 4 }

ospfNewCfgRangeHideState OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS read-create 
    STATUS  current
    DESCRIPTION
        "The state of the hide range."
    ::= { ospfNewCfgRangeEntry 5 }

ospfNewCfgRangeState OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS read-create 
    STATUS  current
    DESCRIPTION
        "The state of the range."
    ::= { ospfNewCfgRangeEntry 6 }

ospfNewCfgRangeDelete OBJECT-TYPE
    SYNTAX  INTEGER {
        other(1),
        delete(2)
        }
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "When set to the value of 2 (delete), the entire row is deleted.
         When read, other(1) is returned. Setting the value to anything
         other than 2(delete) has no effect on the state of the row."
    ::= { ospfNewCfgRangeEntry 7 }


ospfRouteRedistribution   OBJECT IDENTIFIER ::= { ospfCfg 4 }

ospfRedistributeStatic    OBJECT IDENTIFIER ::= { ospfRouteRedistribution 1 }

ospfCurCfgStaticMetric OBJECT-TYPE
    SYNTAX INTEGER (0..16777214)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The metric to be assigned to static routes." 
    ::= { ospfRedistributeStatic 1 }

ospfNewCfgStaticMetric OBJECT-TYPE
    SYNTAX INTEGER (0..16777214)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
    "The metric to be assigned to static routes." 
    ::= { ospfRedistributeStatic 2 }

ospfCurCfgStaticMetricType OBJECT-TYPE
    SYNTAX INTEGER {
        none(1),
        type1(2),
        type2(3)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The AS External metric type for static routes."
    ::= { ospfRedistributeStatic 3 }

ospfNewCfgStaticMetricType OBJECT-TYPE
    SYNTAX INTEGER {
        none(1),
        type1(2),
        type2(3)
        }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
    "The AS External metric type for static routes."
    ::= { ospfRedistributeStatic 4 }

ospfCurCfgStaticOutRmapList OBJECT-TYPE
    SYNTAX OCTET STRING
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The route maps present in the out route map list. 
         The route maps are presented in a bitmap format.

         in receiving order:

         OCTET 1  OCTET 2  .....
         xxxxxxxx xxxxxxxx .....
         ||    || |_ Rmap 9
         ||    ||
         ||    ||___ Rmap 8
         ||    |____ Rmap 7
         ||      .    .   .
         ||_________ Rmap 2
         |__________ Rmap 1

         where x : 1 - The represented route map is selected
         0 - The represented route map is not selected"
    ::= { ospfRedistributeStatic 5 }

ospfNewCfgStaticOutRmapList OBJECT-TYPE
    SYNTAX OCTET STRING
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The route maps present in the out route map list. 
         The route maps are presented in a bitmap format.

         in receiving order:

         OCTET 1  OCTET 2  .....
         xxxxxxxx xxxxxxxx .....
         ||    || |_ Rmap 9
         ||    ||
         ||    ||___ Rmap 8
         ||    |____ Rmap 7
         ||      .    .   .
         ||_________ Rmap 2
         |__________ Rmap 1

         where x : 1 - The represented route map is selected
         0 - The represented route map is not selected"
    ::= { ospfRedistributeStatic 6 }

ospfNewCfgStaticAddOutRmap OBJECT-TYPE
    SYNTAX Integer32 
    MAX-ACCESS read-write
    STATUS current  
    DESCRIPTION
    "The route map to be add into out-rmap list. When read, 0 is returned."
    ::= { ospfRedistributeStatic 7 }

ospfNewCfgStaticRemoveOutRmap OBJECT-TYPE
    SYNTAX Integer32 
    MAX-ACCESS read-write
    STATUS current  
    DESCRIPTION
    "The route map to be removed from out-rmap list. When read, 
         0 is returned."
    ::= { ospfRedistributeStatic 8 }

ospfRedistributeEbgp    OBJECT IDENTIFIER ::= { ospfRouteRedistribution 2 }

ospfCurCfgEbgpMetric OBJECT-TYPE
    SYNTAX INTEGER (0..16777214)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The export metric to be assigned to External BGP routes."
    ::= { ospfRedistributeEbgp 1 }

ospfNewCfgEbgpMetric OBJECT-TYPE
    SYNTAX INTEGER (0..16777214)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
    "The export metric to be assigned to External BGP routes."
    ::= { ospfRedistributeEbgp 2 }

ospfCurCfgEbgpMetricType OBJECT-TYPE
    SYNTAX INTEGER {
        none(1),
        type1(2),
        type2(3)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The AS External metric type for External BGP routes."
    ::= { ospfRedistributeEbgp 3 }

ospfNewCfgEbgpMetricType OBJECT-TYPE
    SYNTAX INTEGER {
        none(1),
        type1(2),
        type2(3)
        }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
    "The AS External metric type for External BGP routes."
    ::= { ospfRedistributeEbgp 4 }

ospfCurCfgEbgpOutRmapList OBJECT-TYPE
    SYNTAX OCTET STRING
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The route maps present in the out route map list. 
         The route maps are presented in a bitmap format.

         in receiving order:

         OCTET 1  OCTET 2  .....
         xxxxxxxx xxxxxxxx .....
         ||    || |_ Rmap 9
         ||    ||
         ||    ||___ Rmap 8
         ||    |____ Rmap 7
         ||      .    .   .
         ||_________ Rmap 2
         |__________ Rmap 1

         where x : 1 - The represented route map is selected
         0 - The represented route map is not selected"
    ::= { ospfRedistributeEbgp 5 }

ospfNewCfgEbgpOutRmapList OBJECT-TYPE
    SYNTAX OCTET STRING
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The route maps present in the out route map list. 
         The route maps are presented in a bitmap format.

         in receiving order:

         OCTET 1  OCTET 2  .....
         xxxxxxxx xxxxxxxx .....
         ||    || |_ Rmap 9
         ||    ||
         ||    ||___ Rmap 8
         ||    |____ Rmap 7
         ||      .    .   .
         ||_________ Rmap 2
         |__________ Rmap 1

         where x : 1 - The represented route map is selected
         0 - The represented route map is not selected"
    ::= { ospfRedistributeEbgp 6 }

ospfNewCfgEbgpAddOutRmap OBJECT-TYPE
    SYNTAX Integer32 
    MAX-ACCESS read-write
    STATUS current  
    DESCRIPTION
    "The route map to be add into out-rmap list. When read, 0 is returned."
    ::= { ospfRedistributeEbgp 7 }

ospfNewCfgEbgpRemoveOutRmap OBJECT-TYPE
    SYNTAX Integer32 
    MAX-ACCESS read-write
    STATUS current  
    DESCRIPTION
    "The route map to be removed from out-rmap list. When read, 
         0 is returned."
    ::= { ospfRedistributeEbgp 8 }

ospfRedistributeIbgp    OBJECT IDENTIFIER ::= { ospfRouteRedistribution 3 }

ospfCurCfgIbgpMetric OBJECT-TYPE
    SYNTAX INTEGER (0..16777214)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The export metric for Internal BGP routes."
    ::= { ospfRedistributeIbgp 1 }

ospfNewCfgIbgpMetric OBJECT-TYPE
    SYNTAX INTEGER (0..16777214)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
    "The export metric for Internal BGP routes."
    ::= { ospfRedistributeIbgp 2 }

ospfCurCfgIbgpMetricType OBJECT-TYPE
    SYNTAX INTEGER {
        none(1),
        type1(2),
        type2(3)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The AS External metric type for Internal BGP routes."
    ::= { ospfRedistributeIbgp 3 }

ospfNewCfgIbgpMetricType OBJECT-TYPE
    SYNTAX INTEGER {
        none(1),
        type1(2),
        type2(3)
        }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
    "The AS External metric type for Internal BGP routes."
    ::= { ospfRedistributeIbgp 4 }

ospfCurCfgIbgpOutRmapList OBJECT-TYPE
    SYNTAX OCTET STRING
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The route maps present in the out route map list. 
         The route maps are presented in a bitmap format.

         in receiving order:

         OCTET 1  OCTET 2  .....
         xxxxxxxx xxxxxxxx .....
         ||    || |_ Rmap 9
         ||    ||
         ||    ||___ Rmap 8
         ||    |____ Rmap 7
         ||      .    .   .
         ||_________ Rmap 2
         |__________ Rmap 1

         where x : 1 - The represented route map is selected
         0 - The represented route map is not selected"
    ::= { ospfRedistributeIbgp 5 }

ospfNewCfgIbgpOutRmapList OBJECT-TYPE
    SYNTAX OCTET STRING
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The route maps present in the out route map list. 
         The route maps are presented in a bitmap format.

         in receiving order:

         OCTET 1  OCTET 2  .....
         xxxxxxxx xxxxxxxx .....
         ||    || |_ Rmap 9
         ||    ||
         ||    ||___ Rmap 8
         ||    |____ Rmap 7
         ||      .    .   .
         ||_________ Rmap 2
         |__________ Rmap 1

         where x : 1 - The represented route map is selected
         0 - The represented route map is not selected"
    ::= { ospfRedistributeIbgp 6 }

ospfNewCfgIbgpAddOutRmap OBJECT-TYPE
    SYNTAX Integer32 
    MAX-ACCESS read-write
    STATUS current  
    DESCRIPTION
    "The route map to be add into out-rmap list. When read, 0 is returned."
    ::= { ospfRedistributeIbgp 7 }

ospfNewCfgIbgpRemoveOutRmap OBJECT-TYPE
    SYNTAX Integer32 
    MAX-ACCESS read-write
    STATUS current  
    DESCRIPTION
    "The route map to be removed from out-rmap list. When read, 
         0 is returned."
    ::= { ospfRedistributeIbgp 8 }

ospfRedistributeFixed    OBJECT IDENTIFIER ::= { ospfRouteRedistribution 4 }

ospfCurCfgFixedMetric OBJECT-TYPE
    SYNTAX INTEGER (0..16777214)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The export metric for fixed routes."
    ::= { ospfRedistributeFixed 1 }

ospfNewCfgFixedMetric OBJECT-TYPE
    SYNTAX INTEGER (0..16777214)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
    "The export metric for fixed routes."
    ::= { ospfRedistributeFixed 2 }

ospfCurCfgFixedMetricType OBJECT-TYPE
    SYNTAX INTEGER {
        none(1),
        type1(2),
        type2(3)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The AS External metric type for fixed routes."
    ::= { ospfRedistributeFixed 3 }

ospfNewCfgFixedMetricType OBJECT-TYPE
    SYNTAX INTEGER {
        none(1),
        type1(2),
        type2(3)
        }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
    "The AS External metric type for fixed routes."
    ::= { ospfRedistributeFixed 4 }

ospfCurCfgFixedOutRmapList OBJECT-TYPE
    SYNTAX OCTET STRING
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The route maps present in the out route map list. 
         The route maps are presented in a bitmap format.

         in receiving order:

         OCTET 1  OCTET 2  .....
         xxxxxxxx xxxxxxxx .....
         ||    || |_ Rmap 9
         ||    ||
         ||    ||___ Rmap 8
         ||    |____ Rmap 7
         ||      .    .   .
         ||_________ Rmap 2
         |__________ Rmap 1

         where x : 1 - The represented route map is selected
         0 - The represented route map is not selected"
    ::= { ospfRedistributeFixed 5 }

ospfNewCfgFixedOutRmapList OBJECT-TYPE
    SYNTAX OCTET STRING
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The route maps present in the out route map list. 
         The route maps are presented in a bitmap format.

         in receiving order:

         OCTET 1  OCTET 2  .....
         xxxxxxxx xxxxxxxx .....
         ||    || |_ Rmap 9
         ||    ||
         ||    ||___ Rmap 8
         ||    |____ Rmap 7
         ||      .    .   .
         ||_________ Rmap 2
         |__________ Rmap 1

         where x : 1 - The represented route map is selected
         0 - The represented route map is not selected"
    ::= { ospfRedistributeFixed 6 }

ospfNewCfgFixedAddOutRmap OBJECT-TYPE
    SYNTAX Integer32 
    MAX-ACCESS read-write
    STATUS current  
    DESCRIPTION
    "The route map to be add into out-rmap list. When read, 0 is returned."
    ::= { ospfRedistributeFixed 7 }

ospfNewCfgFixedRemoveOutRmap OBJECT-TYPE
    SYNTAX Integer32 
    MAX-ACCESS read-write
    STATUS current  
    DESCRIPTION
    "The route map to be removed from out-rmap list. When read, 
         0 is returned."
    ::= { ospfRedistributeFixed 8 }

ospfRedistributeRip    OBJECT IDENTIFIER ::= { ospfRouteRedistribution 5 }

ospfCurCfgRipMetric OBJECT-TYPE
    SYNTAX INTEGER (0..16777214)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The export metric for RIP routes.  "
    ::= { ospfRedistributeRip 1 }

ospfNewCfgRipMetric OBJECT-TYPE
    SYNTAX INTEGER (0..16777214)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
    "The export metric for RIP routes.  "
    ::= { ospfRedistributeRip 2 }

ospfCurCfgRipMetricType OBJECT-TYPE
    SYNTAX INTEGER {
        none(1),
        type1(2),
        type2(3)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The AS External metric type for RIP routes."
    ::= { ospfRedistributeRip 3 }

ospfNewCfgRipMetricType OBJECT-TYPE
    SYNTAX INTEGER {
        none(1),
        type1(2),
        type2(3)
        }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
    "The AS External metric type for RIP routes."
    ::= { ospfRedistributeRip 4 }

ospfCurCfgRipOutRmapList OBJECT-TYPE
    SYNTAX OCTET STRING
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The route maps present in the out route map list. 
         The route maps are presented in a bitmap format.

         in receiving order:

         OCTET 1  OCTET 2  .....
         xxxxxxxx xxxxxxxx .....
         ||    || |_ Rmap 9
         ||    ||
         ||    ||___ Rmap 8
         ||    |____ Rmap 7
         ||      .    .   .
         ||_________ Rmap 2
         |__________ Rmap 1

         where x : 1 - The represented route map is selected
         0 - The represented route map is not selected"
    ::= { ospfRedistributeRip 5 }

ospfNewCfgRipOutRmapList OBJECT-TYPE
    SYNTAX OCTET STRING
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The route maps present in the out route map list. 
         The route maps are presented in a bitmap format.

         in receiving order:

         OCTET 1  OCTET 2  .....
         xxxxxxxx xxxxxxxx .....
         ||    || |_ Rmap 9
         ||    ||
         ||    ||___ Rmap 8
         ||    |____ Rmap 7
         ||      .    .   .
         ||_________ Rmap 2
         |__________ Rmap 1

         where x : 1 - The represented route map is selected
         0 - The represented route map is not selected"
    ::= { ospfRedistributeRip 6 }

ospfNewCfgRipAddOutRmap OBJECT-TYPE
    SYNTAX Integer32 
    MAX-ACCESS read-write
    STATUS current  
    DESCRIPTION
    "The route map to be add into out-rmap list. When read, 0 is returned."
    ::= { ospfRedistributeRip 7 }

ospfNewCfgRipRemoveOutRmap OBJECT-TYPE
    SYNTAX Integer32 
    MAX-ACCESS read-write
    STATUS current  
    DESCRIPTION
    "The route map to be removed from out-rmap list. When read, 
         0 is returned."
    ::= { ospfRedistributeRip 8 }

--
-- IP OSPFv3 configuration
--
ospf3General    OBJECT IDENTIFIER ::= { ospf3Cfg 1 }

ospf3IntfTableMaxSize OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The maximum number of rows in the OSPFv3 Interface table."
    ::= { ospf3General 1 }

ospf3AreaTableMaxSize OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The maximum number of rows in the OSPFv3 Area table."
    ::= { ospf3General 2 }

ospf3RangeTableMaxSize OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The maximum number of rows in the OSPFv3 Range table."
    ::= { ospf3General 3 }

ospf3ExtRangeTableMaxSize OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The maximum number of rows in the OSPFv3 Summary Prefix table."
    ::= { ospf3General 4 }

ospf3RedistTableMaxSize OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The maximum number of rows in the OSPFv3 Redist Config table."
    ::= { ospf3General 5 }

ospf3VirtIntfTableMaxSize OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The maximum number of rows in the OSPFv3 Virtual Interface
         table."
    ::= { ospf3General 6 }

ospf3HostTableMaxSize OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The maximum number of rows in the OSPFv3 Host table."
    ::= { ospf3General 7 }

 ospf3NbrTableMaxSize OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The maximum number of rows in the OSPFv3 Neighbor table."
    ::= { ospf3General 8 }

ospf3CurCfgState OBJECT-TYPE
    SYNTAX INTEGER {
        on(1),
        off(2)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "OSPFv3 global state."
    ::= { ospf3General 9 }

ospf3NewCfgState OBJECT-TYPE
    SYNTAX INTEGER {
        on(1),
        off(2)
        }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
    "Globally turn OSPFv3 on or off."
    ::= { ospf3General 10 }

ospf3CurCfgRouterId OBJECT-TYPE
    SYNTAX IpAddress 
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The router ID." 
    ::= { ospf3General 11 }

ospf3NewCfgRouterId OBJECT-TYPE
    SYNTAX IpAddress 
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "The router ID." 
    ::= { ospf3General 12 }

ospf3CurCfgAbrType OBJECT-TYPE
    SYNTAX INTEGER {
        standard(1),
        cisco(2),
        ibm(3)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "OSPFv3 alternative ABR type."
    ::= { ospf3General 13 }

ospf3NewCfgAbrType OBJECT-TYPE
    SYNTAX INTEGER {
        standard(1),
        cisco(2),
        ibm(3)
        }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
    "Set the OSPFv3 alternative ABR type."
    ::= { ospf3General 14 }
 
ospf3CurCfgLSDB OBJECT-TYPE
    SYNTAX  INTEGER (-1..2147483647)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The LSDB limit for external LSA."
    ::= { ospf3General 15 }

ospf3NewCfgLSDB OBJECT-TYPE
    SYNTAX  INTEGER (-1..2147483647)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
    "Set the LSDB limit for external LSA, -1 for none."
    ::= { ospf3General 16 }

ospf3CurCfgExitOverflow OBJECT-TYPE
    SYNTAX  Unsigned32 (0..4294967295)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The exit overflow interval in seconds."
    ::= { ospf3General 17 }

ospf3NewCfgExitOverflow OBJECT-TYPE
    SYNTAX  Unsigned32 (0..4294967295)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
    "Set the exit overflow interval in seconds."
    ::= { ospf3General 18 }

 ospf3CurCfgReferenceBw OBJECT-TYPE
    SYNTAX  Unsigned32 (0..4294967295)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The reference bandwidth for default interface metric calculation."
    ::= { ospf3General 19 }

ospf3NewCfgReferenceBw OBJECT-TYPE
    SYNTAX  Unsigned32 (0..4294967295)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
    "The reference bandwidth for default interface metric calculation."
    ::= { ospf3General 20 }

  ospf3CurCfgSpfDelay OBJECT-TYPE
    SYNTAX  INTEGER (0..65535)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The delay between topology change and SPF calculation."
    ::= { ospf3General 21 }

ospf3NewCfgSpfDelay OBJECT-TYPE
    SYNTAX  INTEGER (0..65535)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
    "The delay between topology change and SPF calculation."
    ::= { ospf3General 22 }

 ospf3CurCfgSpfHold OBJECT-TYPE
    SYNTAX  INTEGER (0..65535)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The hold time between two consecutive SPF calculation."
    ::= { ospf3General 23 }

ospf3NewCfgSpfHold OBJECT-TYPE
    SYNTAX  INTEGER (0..65535)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
    "The hold time between two consecutive SPF calculation."
    ::= { ospf3General 24 }


ospf3CurCfgNssaAsbrDfRtTrans OBJECT-TYPE
    SYNTAX INTEGER {
        on(1),
        off(2)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "OSPFv3 state of setting P-bit by an NSSA internal ASBR."
    ::= { ospf3General 29 }

ospf3NewCfgNssaAsbrDfRtTrans OBJECT-TYPE
    SYNTAX INTEGER {
        on(1),
        off(2)
        }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
    "OSPFv3 state of setting P-bit by an NSSA internal ASBR."
    ::= { ospf3General 30 }

ospf3CurCfgAreaTable OBJECT-TYPE
    SYNTAX SEQUENCE OF Ospf3CurCfgAreaEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "The table of OSPFv3 area in the current configuration block."
    ::= { ospf3Cfg 2 }

ospf3CurCfgAreaEntry OBJECT-TYPE
    SYNTAX Ospf3CurCfgAreaEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "Information about a OSPFv3 area."
    INDEX { ospf3CurCfgAreaIndex }
    ::= { ospf3CurCfgAreaTable 1 }
 
Ospf3CurCfgAreaEntry ::= SEQUENCE {
    ospf3CurCfgAreaIndex         Integer32,
    ospf3CurCfgAreaId            IpAddress,
    ospf3CurCfgAreaStbInterval   INTEGER,
    ospf3CurCfgAreaType             INTEGER,
    ospf3CurCfgAreaNoSumm           INTEGER,
    ospf3CurCfgAreaDefaultMetric    INTEGER,
    ospf3CurCfgAreaDefaultMetricType    INTEGER,
    ospf3CurCfgAreaTranslRole           INTEGER,
    ospf3CurCfgAreaStatus        INTEGER
    }
 
ospf3CurCfgAreaIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The OSPFv3 area number for which the OSPFv3 area table is related."
    ::= { ospf3CurCfgAreaEntry 1}

ospf3CurCfgAreaId OBJECT-TYPE
    SYNTAX IpAddress 
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The IP Address of the OSPFv3 area." 
    ::= { ospf3CurCfgAreaEntry 2 }

ospf3CurCfgAreaStbInterval OBJECT-TYPE
    SYNTAX INTEGER (1..255) 
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The stability interval for the NSSA area" 
    ::= { ospf3CurCfgAreaEntry 3 }

ospf3CurCfgAreaType OBJECT-TYPE
    SYNTAX INTEGER {
        transit(1),
        stub(2),
        nssa(3)
           }
    MAX-ACCESS   read-only
    STATUS  current
    DESCRIPTION
        "Type of Area.
        transit(1)
        stub(2)
        nssa(3)"
           
    ::= { ospf3CurCfgAreaEntry 4 }

ospf3CurCfgAreaNoSumm OBJECT-TYPE
    SYNTAX  INTEGER {
        disabled(0), 
     enabled(1)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Status
       disabled(0)
       enabled(1)"
    
    ::= { ospf3CurCfgAreaEntry 5 }

ospf3CurCfgAreaDefaultMetric OBJECT-TYPE
    SYNTAX  INTEGER (1..16777215)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Metric for stub/NSSA area (1-16777215)"
    ::= { ospf3CurCfgAreaEntry 6 }

ospf3CurCfgAreaDefaultMetricType OBJECT-TYPE
    SYNTAX INTEGER (1..3) 
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "Metric Type for stub/NSSA area (1-3)" 
    ::= { ospf3CurCfgAreaEntry 7 }

ospf3CurCfgAreaTranslRole OBJECT-TYPE
    SYNTAX INTEGER {
        always(1),
        candidate(2)
           }
    MAX-ACCESS   read-only
    STATUS  current
    DESCRIPTION
        "Translation role for the NSSA area.
        always(1)
        candidate(2)"
           
    ::= { ospf3CurCfgAreaEntry 8 }

ospf3CurCfgAreaStatus OBJECT-TYPE
    SYNTAX  INTEGER {
        disabled(0), 
     enabled(1)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Status
       disabled(0)
       enabled(1)"
    
    ::= { ospf3CurCfgAreaEntry 9 }

ospf3NewCfgAreaTable OBJECT-TYPE
    SYNTAX SEQUENCE OF Ospf3NewCfgAreaEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "The table of OSPFv3 Area configuration in the new configuration block."
    ::= { ospf3Cfg 3 }

ospf3NewCfgAreaEntry OBJECT-TYPE
    SYNTAX Ospf3NewCfgAreaEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "Information about a OSPFv3 area."
    INDEX { ospf3NewCfgAreaIndex }
    ::= { ospf3NewCfgAreaTable 1 }
 
Ospf3NewCfgAreaEntry ::= SEQUENCE {
    ospf3NewCfgAreaIndex         Integer32,
    ospf3NewCfgAreaId            IpAddress, 
    ospf3NewCfgAreaStbInterval   INTEGER,
    ospf3NewCfgAreaType             INTEGER,
    ospf3NewCfgAreaNoSumm           INTEGER,
    ospf3NewCfgAreaDefaultMetric    INTEGER,
    ospf3NewCfgAreaDefaultMetricType    INTEGER,
    ospf3NewCfgAreaTranslRole           INTEGER,
    ospf3NewCfgAreaStatus        INTEGER,
    ospf3NewCfgAreaDelete        INTEGER    
    }
 
ospf3NewCfgAreaIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only 
    STATUS current
    DESCRIPTION
    "The OSPFv3 area number for which the OSPFv3 area table is related."
    ::= { ospf3NewCfgAreaEntry 1}

ospf3NewCfgAreaId OBJECT-TYPE
    SYNTAX IpAddress 
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "The IP Address of the OSPFv3 area." 
    ::= { ospf3NewCfgAreaEntry 2 }

ospf3NewCfgAreaStbInterval OBJECT-TYPE
    SYNTAX INTEGER (1..255) 
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "The Stability interval for the NSSA area." 
    ::= { ospf3NewCfgAreaEntry 3 }

ospf3NewCfgAreaType OBJECT-TYPE
    SYNTAX INTEGER {
        transit(1),
        stub(2),
        nssa(3)
           }
    MAX-ACCESS   read-write
    STATUS  current
    DESCRIPTION
        "Type of Area.
        transit(1)
        stub(2)
           nssa(3)"
           
    ::= { ospf3NewCfgAreaEntry 4 }

ospf3NewCfgAreaNoSumm OBJECT-TYPE
    SYNTAX  INTEGER {
        disabled(0), 
     enabled(1)
        }
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "Status
       disabled(0)
       enabled(1)"
    
    ::= { ospf3NewCfgAreaEntry 5 }

ospf3NewCfgAreaDefaultMetric OBJECT-TYPE
    SYNTAX  INTEGER (1..16777215)
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "Metric for stub/NSSA area (1-16777215)"
    ::= { ospf3NewCfgAreaEntry 6 }

ospf3NewCfgAreaDefaultMetricType OBJECT-TYPE
    SYNTAX INTEGER (1..3) 
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "Metric Type for stub/NSSA area (1-3)" 
    ::= { ospf3NewCfgAreaEntry 7 }
 
ospf3NewCfgAreaTranslRole OBJECT-TYPE
    SYNTAX INTEGER {
        always(1),
        candidate(2)
           }
        MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "Translation role for the NSSA area.
        always(1)
        candidate(2)"
    ::= { ospf3NewCfgAreaEntry 8 }

ospf3NewCfgAreaStatus OBJECT-TYPE
    SYNTAX  INTEGER {
        disabled(0), 
     enabled(1)
        }
    MAX-ACCESS  read-write
    STATUS current
    DESCRIPTION
        "Status
       disabled(0)
       enabled(1)"
    
    ::= { ospf3NewCfgAreaEntry 9 }

ospf3NewCfgAreaDelete OBJECT-TYPE
   SYNTAX INTEGER {
    no(0),
    yes(1)
    }
   MAX-ACCESS read-write
   STATUS current
   DESCRIPTION
    "Delete the area
        no(0),
            yes(1)"

    ::= { ospf3NewCfgAreaEntry 10 }


-- OSPFv3 Host Table

ospf3CurCfgHostTable OBJECT-TYPE
    SYNTAX SEQUENCE OF Ospf3CurCfgHostEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "The table of OSPFv3 Host configuration."
    ::= { ospf3Cfg 4 }

ospf3CurCfgHostEntry OBJECT-TYPE
    SYNTAX Ospf3CurCfgHostEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "Information about a OSPFv3 host."
    INDEX { ospf3CurCfgHostIndex }
    ::= { ospf3CurCfgHostTable 1 }
 
Ospf3CurCfgHostEntry ::= SEQUENCE {
    ospf3CurCfgHostIndex         Integer32,
    ospf3CurCfgHostIpAddr        DisplayString,
    ospf3CurCfgHostAreaIndex     Integer32,
    ospf3CurCfgHostCost          INTEGER,
    ospf3CurCfgHostState        INTEGER
    }
 
ospf3CurCfgHostIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The OSPFv3 host number for which the OSPFv3 host table is related."
    ::= { ospf3CurCfgHostEntry 1}

ospf3CurCfgHostIpAddr OBJECT-TYPE
    SYNTAX DisplayString 
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The IPv6 Address of the OSPFv3 host." 
    ::= { ospf3CurCfgHostEntry 2 }

ospf3CurCfgHostAreaIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The area index."
    ::= { ospf3CurCfgHostEntry 3 }

ospf3CurCfgHostCost OBJECT-TYPE
    SYNTAX  INTEGER (1..65535)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The cost of the OSPFv3 host."
    ::= { ospf3CurCfgHostEntry 4 }

ospf3CurCfgHostState OBJECT-TYPE
    SYNTAX  INTEGER  {
    enabled(2),
    disabled(3)
    }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable an OSPFv3 Host"
    ::= { ospf3CurCfgHostEntry 5 }

ospf3NewCfgHostTable OBJECT-TYPE
    SYNTAX SEQUENCE OF Ospf3NewCfgHostEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "The table of OSPFv3 Host configuration."
    ::= { ospf3Cfg 5 }

ospf3NewCfgHostEntry OBJECT-TYPE
    SYNTAX Ospf3NewCfgHostEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "Information about a OSPFv3 host."
    INDEX { ospf3NewCfgHostIndex }
    ::= { ospf3NewCfgHostTable 1 }
 
Ospf3NewCfgHostEntry ::= SEQUENCE {
    ospf3NewCfgHostIndex         Integer32,
    ospf3NewCfgHostIpAddr        DisplayString, 
    ospf3NewCfgHostAreaIndex     Integer32,
    ospf3NewCfgHostCost          INTEGER,
    ospf3NewCfgHostState        INTEGER,
    ospf3NewCfgHostDelete        INTEGER
    }
 
ospf3NewCfgHostIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only 
    STATUS current
    DESCRIPTION
    "The OSPFv3 host number for which the OSPFv3 host table is related."
    ::= { ospf3NewCfgHostEntry 1}

ospf3NewCfgHostIpAddr OBJECT-TYPE
    SYNTAX DisplayString  (SIZE(0..40)) 
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "The IP6 Address of the OSPFv3 host.
     Address should be 4-byte haxadecimal colon notation.
     Valid IPv6 address should be in any of the following forms
     xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
     xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx"
    ::= { ospf3NewCfgHostEntry 2 }

ospf3NewCfgHostAreaIndex OBJECT-TYPE
    SYNTAX Integer32 
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "The OSPFv3 area index."
    ::= { ospf3NewCfgHostEntry 3 }

ospf3NewCfgHostCost OBJECT-TYPE
    SYNTAX  INTEGER (1..65535)
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "The cost of the OSPFv3 host."
    ::= { ospf3NewCfgHostEntry 4 }

ospf3NewCfgHostState OBJECT-TYPE
    SYNTAX  INTEGER  {
    enabled(2),
    disabled(3)
    }
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "Enable or disable an OSPFv3 Host"
    ::= { ospf3NewCfgHostEntry 5 }

ospf3NewCfgHostDelete  OBJECT-TYPE
    SYNTAX  INTEGER {
        no(0),
        yes(1)
        }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
    "Delete the OSPFv3 host:
         no(0),
         yes(1)" 
    ::= { ospf3NewCfgHostEntry 6 }

-- OSPFv3 Neighbor Table

ospf3CurCfgNbrTable OBJECT-TYPE
    SYNTAX SEQUENCE OF Ospf3CurCfgNbrEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "The table of OSPFv3 Neighbor configuration."
    ::= { ospf3Cfg 6 }

ospf3CurCfgNbrEntry OBJECT-TYPE
    SYNTAX Ospf3CurCfgNbrEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "Information about a OSPFv3 neighbor."
    INDEX { ospf3CurCfgNbrIndex }
    ::= { ospf3CurCfgNbrTable 1 }
 
Ospf3CurCfgNbrEntry ::= SEQUENCE {
    ospf3CurCfgNbrIndex         Integer32,
    ospf3CurCfgNbrIpAddr       DisplayString,
    ospf3CurCfgNbrIntfIndex   Integer32,
    ospf3CurCfgNbrPriority       INTEGER,
    ospf3CurCfgNbrState     INTEGER
    }
 
ospf3CurCfgNbrIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The OSPFv3 neighbor number for which the OSPFv3 neighbor table is related."
    ::= { ospf3CurCfgNbrEntry 1}

ospf3CurCfgNbrIpAddr OBJECT-TYPE
    SYNTAX DisplayString 
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The IPv6 Address of the OSPFv3 neighbor." 
    ::= { ospf3CurCfgNbrEntry 2 }

ospf3CurCfgNbrIntfIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The interface index."
    ::= { ospf3CurCfgNbrEntry 3 }

ospf3CurCfgNbrPriority OBJECT-TYPE
    SYNTAX  INTEGER (0..255)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The priority of the OSPFv3 neighbor."
    ::= { ospf3CurCfgNbrEntry 4 }

ospf3CurCfgNbrState OBJECT-TYPE
    SYNTAX  INTEGER  {
    enabled(2),
    disabled(3)
    }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable an OSPFv3 neighbor"
    ::= { ospf3CurCfgNbrEntry 5 }

ospf3NewCfgNbrTable OBJECT-TYPE
    SYNTAX SEQUENCE OF Ospf3NewCfgNbrEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "The table of OSPFv3 Neighbor configuration."
    ::= { ospf3Cfg 7 }

ospf3NewCfgNbrEntry OBJECT-TYPE
    SYNTAX Ospf3NewCfgNbrEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "Information about a OSPFv3 neighbor."
    INDEX { ospf3NewCfgNbrIndex }
    ::= { ospf3NewCfgNbrTable 1 }
 
Ospf3NewCfgNbrEntry ::= SEQUENCE {
    ospf3NewCfgNbrIndex         Integer32,
    ospf3NewCfgNbrIpAddr       DisplayString, 
    ospf3NewCfgNbrIntfIndex   Integer32,
    ospf3NewCfgNbrPriority       INTEGER,
    ospf3NewCfgNbrState   INTEGER,
    ospf3NewCfgNbrDelete        INTEGER
    }
 
ospf3NewCfgNbrIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only 
    STATUS current
    DESCRIPTION
    "The OSPFv3 neighbor number for which the OSPFv3 neighbor table is related."
    ::= { ospf3NewCfgNbrEntry 1}

ospf3NewCfgNbrIpAddr OBJECT-TYPE
    SYNTAX DisplayString  (SIZE(0..40)) 
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "The IP6 Address of the OSPFv3 neighbor.
     Address should be 4-byte haxadecimal colon notation.
     Valid IPv6 address should be in any of the following forms
     xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
     xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx"
    ::= { ospf3NewCfgNbrEntry 2 }

ospf3NewCfgNbrIntfIndex OBJECT-TYPE
    SYNTAX Integer32 
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "The OSPFv3 interface index."
    ::= { ospf3NewCfgNbrEntry 3 }

ospf3NewCfgNbrPriority OBJECT-TYPE
    SYNTAX  INTEGER (0..255)
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "The cost of the OSPFv3 neighbor."
    ::= { ospf3NewCfgNbrEntry 4 }

ospf3NewCfgNbrState OBJECT-TYPE
    SYNTAX  INTEGER  {
    enabled(1),
    disabled(0)
    }
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "Enable or disable an OSPFv3 Neighbor"
    ::= { ospf3NewCfgNbrEntry 5 }

ospf3NewCfgNbrDelete  OBJECT-TYPE
    SYNTAX  INTEGER {
        no(0),
        yes(1)
        }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
    "Delete the OSPFv3 neighbor:
         no(0),
         yes(1)" 
    ::= { ospf3NewCfgNbrEntry 6 }

ospf3CurCfgIntfTable OBJECT-TYPE
    SYNTAX SEQUENCE OF Ospf3CurCfgIntfEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "The table of OSPFv3 Interface in the current configuration block."
    ::= { ospf3Cfg 8 }

ospf3CurCfgIntfEntry OBJECT-TYPE
    SYNTAX Ospf3CurCfgIntfEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "Information about an OSPFv3 Interface."
    INDEX { ospf3CurCfgIntfIndex }
    ::= { ospf3CurCfgIntfTable 1 }
 
Ospf3CurCfgIntfEntry ::= SEQUENCE {
    ospf3CurCfgIntfIndex         Integer32,
    ospf3CurCfgIntfInstId        INTEGER,
    ospf3CurCfgIntfArea          INTEGER,
    ospf3CurCfgIntfCost          INTEGER,
    ospf3CurCfgIntfPrio          INTEGER,
    ospf3CurCfgIntfHello         INTEGER,
    ospf3CurCfgIntfDead          INTEGER,
    ospf3CurCfgIntfPoll             Unsigned32,
    ospf3CurCfgIntfTrans         INTEGER,
    ospf3CurCfgIntfRetra         INTEGER,
    ospf3CurCfgIntfPassive       INTEGER,
    ospf3CurCfgIntfNetworkType                  INTEGER,
    ospf3CurCfgIntfStatus        INTEGER
    ,
    ospf3CurCfgIntfAuthSpi            Unsigned32,
    ospf3CurCfgIntfAuthEnable         INTEGER,
    ospf3CurCfgIntfAuthType           INTEGER,
    ospf3CurCfgIntfAuthKey            OCTET STRING,
    ospf3CurCfgIntfEncrySpi           Unsigned32,
    ospf3CurCfgIntfEncryEnable        INTEGER,
    ospf3CurCfgIntfEncryType          INTEGER,
    ospf3CurCfgIntfEncryKey           OCTET STRING,
    ospf3CurCfgIntfEncryAuthType      INTEGER,
    ospf3CurCfgIntfEncryAuthKey       OCTET STRING
    ,
    ospf3CurCfgIntfLsaSupress                   INTEGER
    }
 
ospf3CurCfgIntfIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The OSPFv3 Interface number for which the OSPFv3 Interface table is 
         related."
    ::= { ospf3CurCfgIntfEntry 1}

ospf3CurCfgIntfInstId  OBJECT-TYPE
    SYNTAX INTEGER (0..255)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Interface Instance Id"
    ::= { ospf3CurCfgIntfEntry 2 }

ospf3CurCfgIntfArea OBJECT-TYPE
    SYNTAX INTEGER (0..5) 
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The index of the area that the interface belongs" 
    ::= { ospf3CurCfgIntfEntry 3 }

ospf3CurCfgIntfCost  OBJECT-TYPE 
    SYNTAX INTEGER (0..65535) 
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "Interface cost" 
    ::= { ospf3CurCfgIntfEntry 4 }

ospf3CurCfgIntfPrio   OBJECT-TYPE
   SYNTAX INTEGER (1..255) 
    MAX-ACCESS read-only
    STATUS current 
    DESCRIPTION
    "Interface router priority" 
    ::= { ospf3CurCfgIntfEntry 5 }

ospf3CurCfgIntfHello  OBJECT-TYPE 
    SYNTAX INTEGER (1..65535) 
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "Hello interval" 
    ::= { ospf3CurCfgIntfEntry 6 }

ospf3CurCfgIntfDead   OBJECT-TYPE
   SYNTAX INTEGER (1..65535) 
    MAX-ACCESS read-only
    STATUS current 
    DESCRIPTION
    "Dead interval" 
    ::= { ospf3CurCfgIntfEntry 7 }

ospf3CurCfgIntfPoll   OBJECT-TYPE
   SYNTAX Unsigned32 (1..4294967295) 
    MAX-ACCESS read-only
    STATUS current 
    DESCRIPTION
    "Poll interval(1..4294967295)" 
    ::= { ospf3CurCfgIntfEntry 8 }

ospf3CurCfgIntfTrans  OBJECT-TYPE
   SYNTAX INTEGER (1..1800) 
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "Transmit delay" 
    ::= { ospf3CurCfgIntfEntry 9 }
    
ospf3CurCfgIntfRetra OBJECT-TYPE
    SYNTAX INTEGER (1..1800) 
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "Retransmit interval" 
    ::= { ospf3CurCfgIntfEntry 10 }

ospf3CurCfgIntfPassive  OBJECT-TYPE
    SYNTAX  INTEGER {
        disabled(0),
        enabled(1)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "Passive interface
    disabled(0),
        enabled(1)" 
    ::= { ospf3CurCfgIntfEntry 11 }

ospf3CurCfgIntfNetworkType OBJECT-TYPE
    SYNTAX INTEGER {
        broadcast(1),
        non-broadcast(2),
        point-to-point(3),
        point-to-multipoint(4)
           }
    MAX-ACCESS   read-only
    STATUS  current
    DESCRIPTION
        "Network Type.
        broadcast(1),
        non-broadcast(2),
        point-to-point(3),
        point-to-multipoint(4)"
           
    ::= { ospf3CurCfgIntfEntry 12 }


ospf3CurCfgIntfStatus  OBJECT-TYPE
    SYNTAX  INTEGER {
        disabled(0),
        enabled(1)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "Status of the interface
    disabled(0),
        enabled(1)" 
    ::= { ospf3CurCfgIntfEntry 16 }

ospf3CurCfgIntfAuthSpi  OBJECT-TYPE
    SYNTAX Unsigned32 (256..4294967295)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Spi Id(256 - 4294967295)"
    ::= { ospf3CurCfgIntfEntry 17 }

ospf3CurCfgIntfAuthEnable OBJECT-TYPE
    SYNTAX  INTEGER {
        disabled(0),
        enabled(1)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "Status
     disabled(0),
     enabled(1)" 
    ::= { ospf3CurCfgIntfEntry 18 }

ospf3CurCfgIntfAuthType  OBJECT-TYPE 
    SYNTAX  INTEGER {
        none(0),
        md5(2),
        sha1(1)
        } 
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "Authentication Type
        none(0),
        md5(2),
        sha1(1)" 
    ::= { ospf3CurCfgIntfEntry 19 }

ospf3CurCfgIntfAuthKey   OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE(4..40)) 
    MAX-ACCESS read-only
    STATUS current 
    DESCRIPTION
    "Authentication Key
      Hex-string MD5 key - 32 chars (128 bits)
      Hex-string SHA-1 key - 40 chars (160 bits)" 
    ::= { ospf3CurCfgIntfEntry 20 }

ospf3CurCfgIntfEncrySpi  OBJECT-TYPE
    SYNTAX Unsigned32 (256..4294967295)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Spi Id(256 - 4294967295)"
    ::= { ospf3CurCfgIntfEntry 21 }

ospf3CurCfgIntfEncryEnable OBJECT-TYPE
    SYNTAX  INTEGER {
        disabled(0),
        enabled(1)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "Status
     disabled(0),
     enabled(1)" 
    ::= { ospf3CurCfgIntfEntry 22 }

ospf3CurCfgIntfEncryType  OBJECT-TYPE 
    SYNTAX  INTEGER {
        null(0),
        des(1),
        tripledes(2),
        aes(3)
        } 
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "Encryption Type
        null(0),
        des(1),
        3des(2),
        aes(3)"
   ::= { ospf3CurCfgIntfEntry 23 }

ospf3CurCfgIntfEncryKey   OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE(4..48)) 
    MAX-ACCESS read-only
    STATUS current 
    DESCRIPTION
    "Encryption Key
      Hex-string DES key - 16 chars (64 bits)
      Hex-string AES key - 32 chars (128 bits)
      Hex-string 3DES key - 48 chars (192 bits)" 
    ::= { ospf3CurCfgIntfEntry 24 }

ospf3CurCfgIntfEncryAuthType  OBJECT-TYPE 
    SYNTAX  INTEGER {
        none(0),
        md5(2),
        sha1(1)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "Encryption Authentication Type
        none(0),
        md5(2),
        sha1(1)"
    ::= { ospf3CurCfgIntfEntry 25 }

ospf3CurCfgIntfEncryAuthKey   OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE(4..40)) 
    MAX-ACCESS read-only
    STATUS current 
    DESCRIPTION
    "Encryption Authentication Key
    Hex-string MD5 key - 32 chars (128 bits)
    Hex-string SHA-1 key - 40 chars (160 bits)" 
    ::= { ospf3CurCfgIntfEntry 26 }


ospf3CurCfgIntfLsaSupress  OBJECT-TYPE
    SYNTAX  INTEGER {
        disabled(0),
        enabled(1)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "LSA Supression on interface
    disabled(0),
        enabled(1)"
    ::= { ospf3CurCfgIntfEntry 27 }

ospf3NewCfgIntfTable OBJECT-TYPE
    SYNTAX SEQUENCE OF Ospf3NewCfgIntfEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "The table of OSPFv3 interface in the new configuration block."
    ::= { ospf3Cfg 9 }

ospf3NewCfgIntfEntry OBJECT-TYPE
    SYNTAX Ospf3NewCfgIntfEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "Information about an OSPFv3 interface."
    INDEX { ospf3NewCfgIntfIndex }
    ::= { ospf3NewCfgIntfTable 1 }
 
Ospf3NewCfgIntfEntry ::= SEQUENCE {
    ospf3NewCfgIntfIndex         Integer32,
    ospf3NewCfgIntfInstId        INTEGER,
    ospf3NewCfgIntfArea          INTEGER,
    ospf3NewCfgIntfCost     INTEGER,
    ospf3NewCfgIntfPrio     INTEGER,
    ospf3NewCfgIntfHello         INTEGER,
    ospf3NewCfgIntfPoll             Unsigned32,
    ospf3NewCfgIntfDead          INTEGER,
    ospf3NewCfgIntfTrans         INTEGER,
    ospf3NewCfgIntfRetra         INTEGER,
    ospf3NewCfgIntfPassive       INTEGER,
    ospf3NewCfgIntfNetworkType                  INTEGER,
    ospf3NewCfgIntfStatus        INTEGER, 
    ospf3NewCfgIntfDelete        INTEGER
    ,
    ospf3NewCfgIntfAuthSpi            Unsigned32,
    ospf3NewCfgIntfAuthEnable         INTEGER,
    ospf3NewCfgIntfAuthType           INTEGER,
    ospf3NewCfgIntfAuthKey            OCTET STRING,
    ospf3NewCfgIntfAuthReset          INTEGER,
    ospf3NewCfgIntfEncrySpi           Unsigned32,
    ospf3NewCfgIntfEncryEnable        INTEGER,
    ospf3NewCfgIntfEncryType          INTEGER,
    ospf3NewCfgIntfEncryKey           OCTET STRING,
    ospf3NewCfgIntfEncryAuthType      INTEGER,
    ospf3NewCfgIntfEncryAuthKey       OCTET STRING,
    ospf3NewCfgIntfEncryReset         INTEGER
    ,
    ospf3NewCfgIntfLsaSupress                   INTEGER
    }
 
ospf3NewCfgIntfIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The OSPFv3 Interface number for which the OSPFv3 Interface table is 
         related."
    ::= { ospf3NewCfgIntfEntry 1}

ospf3NewCfgIntfInstId   OBJECT-TYPE
    SYNTAX INTEGER (0..255)
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "Interface Instance Id (0..255)"
    ::= { ospf3NewCfgIntfEntry 2 }

ospf3NewCfgIntfArea OBJECT-TYPE
    SYNTAX INTEGER (0..5) 
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "The index of the area that the interface belongs (0..5)" 
    ::= { ospf3NewCfgIntfEntry 3 }

ospf3NewCfgIntfCost  OBJECT-TYPE 
    SYNTAX INTEGER (0..65535) 
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "Interface cost(1..65535) and 0 for none" 
    ::= { ospf3NewCfgIntfEntry 4 }

ospf3NewCfgIntfPrio   OBJECT-TYPE
   SYNTAX INTEGER (0..255) 
    MAX-ACCESS read-create
    STATUS current 
    DESCRIPTION
    "Interface router priority(0..255)" 
    ::= { ospf3NewCfgIntfEntry 5 }

ospf3NewCfgIntfHello  OBJECT-TYPE 
    SYNTAX INTEGER (1..65535) 
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "Hello interval(1..65535)" 
    ::= { ospf3NewCfgIntfEntry 6 }

ospf3NewCfgIntfDead   OBJECT-TYPE
   SYNTAX INTEGER (1..65535) 
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "Dead interval(1..65535)" 
    ::= { ospf3NewCfgIntfEntry 7 }

ospf3NewCfgIntfPoll   OBJECT-TYPE
   SYNTAX Unsigned32 (1..4294967295) 
    MAX-ACCESS read-create
    STATUS current 
    DESCRIPTION
    "Poll interval(1..4294967295)" 
    ::= { ospf3NewCfgIntfEntry 8 }

ospf3NewCfgIntfTrans  OBJECT-TYPE
   SYNTAX INTEGER (1..1800) 
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "Transmit delay(1..1800)" 
    ::= { ospf3NewCfgIntfEntry 9 }

ospf3NewCfgIntfRetra OBJECT-TYPE
  SYNTAX INTEGER (1..1800) 
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "Retransmit interval(1..1800)" 
    ::= { ospf3NewCfgIntfEntry 10 }

ospf3NewCfgIntfPassive  OBJECT-TYPE
    SYNTAX  INTEGER {
        disabled(0),
        enabled(1)
        }
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "Passive interface
    disabled(0),
        enabled(1)" 
    ::= { ospf3NewCfgIntfEntry 11 }

ospf3NewCfgIntfNetworkType OBJECT-TYPE
    SYNTAX INTEGER {
        broadcast(1),
        non-broadcast(2),
        point-to-point(3),
        point-to-multipoint(4)
           }
    MAX-ACCESS   read-create
    STATUS  current
    DESCRIPTION
        "Network Type.
        broadcast(1),
        non-broadcast(2),
        point-to-point(3),
        point-to-multipoint(4)"
           
    ::= { ospf3NewCfgIntfEntry 12 }


ospf3NewCfgIntfStatus  OBJECT-TYPE
    SYNTAX  INTEGER {
        disabled(0),
        enabled(1)
        }
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "Status of the interface
    disabled(0),
        enabled(1)" 
    ::= { ospf3NewCfgIntfEntry 16 }

ospf3NewCfgIntfDelete  OBJECT-TYPE
    SYNTAX  INTEGER {
        other(0),
        delete(1)
        }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
    "Delete the interface
         other(0),
         delete(1)" 
    ::= { ospf3NewCfgIntfEntry 17 }

ospf3NewCfgIntfAuthSpi  OBJECT-TYPE
    SYNTAX Unsigned32 (256..4294967295)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Authentication Spi Id(256 - 4294967295)"
    ::= { ospf3NewCfgIntfEntry 18 }

ospf3NewCfgIntfAuthEnable OBJECT-TYPE
    SYNTAX  INTEGER {
        disabled(0),
        enabled(1)
        }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
    "Authentication Status
        disabled(0),
        enabled(1)" 
    ::= { ospf3NewCfgIntfEntry 19 }

ospf3NewCfgIntfAuthType  OBJECT-TYPE 
    SYNTAX  INTEGER {
        none(0),
        md5(2),
        sha1(1)
        } 
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
    "Authentication Type
        none(0),
        md5(2),
        sha1(1)" 
    ::= { ospf3NewCfgIntfEntry 20 }

ospf3NewCfgIntfAuthKey   OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE(4..40)) 
    MAX-ACCESS read-write
    STATUS current 
    DESCRIPTION
    "Authentication Type
     Hex-string MD5 key - 32 chars (128 bits),
     Hex-string SHA-1 key - 40 chars (160 bits)" 
    ::= { ospf3NewCfgIntfEntry 21 }

ospf3NewCfgIntfAuthReset OBJECT-TYPE
    SYNTAX  INTEGER {
        other(0),
        reset(1)
        }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
    "Reset AH configuration
        other(0),
        reset(1)" 
    ::= { ospf3NewCfgIntfEntry 22 }

ospf3NewCfgIntfEncrySpi  OBJECT-TYPE
    SYNTAX Unsigned32 (256..4294967295)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Encryption Spi Id(256 - 4294967295)"
    ::= { ospf3NewCfgIntfEntry 23 }

ospf3NewCfgIntfEncryEnable OBJECT-TYPE
    SYNTAX  INTEGER {
        disabled(0),
        enabled(1)
        }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
    "Encryption Status
        disabled(0),
        enabled(1)" 
    ::= { ospf3NewCfgIntfEntry 24 }

ospf3NewCfgIntfEncryType  OBJECT-TYPE 
    SYNTAX  INTEGER {
        null(0),
        des(1),
        tripledes(2),
        aes(3)
        } 
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
    "Encryption Type
        null(0),
        des(1),
        3des(2),
        aes(3)"
   ::= { ospf3NewCfgIntfEntry 25 }

ospf3NewCfgIntfEncryKey   OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE(4..48)) 
    MAX-ACCESS read-write
    STATUS current 
    DESCRIPTION
    "Encryption Key
    Hex-string DES key - 16 chars (64 bits)
    Hex-string AES key - 32 chars (128 bits)
    Hex-string 3DES key - 48 chars (192 bits)" 
    ::= { ospf3NewCfgIntfEntry 26 }

ospf3NewCfgIntfEncryAuthType  OBJECT-TYPE 
    SYNTAX  INTEGER {
        none(0),
        md5(2),
        sha1(1)
        } 
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
    "Encryption Authentication Type
        none(0),
        md5(2),
        sha1(1)" 
    ::= { ospf3NewCfgIntfEntry 27 }

ospf3NewCfgIntfEncryAuthKey   OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE(4..40)) 
    MAX-ACCESS read-write
    STATUS current 
    DESCRIPTION
    "Encryption Authentication Key
     Hex-string MD5 key - 32 chars (128 bits),
     Hex-string SHA-1 key - 40 chars (160 bits)" 
    ::= { ospf3NewCfgIntfEntry 28 }

ospf3NewCfgIntfEncryReset OBJECT-TYPE
    SYNTAX  INTEGER {
        other(0),
        reset(1)
        }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
    "Reset Encryption configuration
        other(0),
        reset(1)" 
    ::= { ospf3NewCfgIntfEntry 29 }



ospf3NewCfgIntfLsaSupress  OBJECT-TYPE
    SYNTAX  INTEGER {
        disabled(0),
        enabled(1)
        }
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "LSA Supression on interface
    disabled(0),
        enabled(1)"
    ::= { ospf3NewCfgIntfEntry 30 }



ospf3CurCfgVirtIntfTable OBJECT-TYPE
    SYNTAX SEQUENCE OF Ospf3CurCfgVirtIntfEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "The table of OSPFv3 Virtual Interface configuration in the current 
       configuration."
    ::= { ospf3Cfg 10 }

ospf3CurCfgVirtIntfEntry OBJECT-TYPE
    SYNTAX Ospf3CurCfgVirtIntfEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "Information about an OSPFv3v3 virtual Interface."
    INDEX { ospf3CurCfgVirtIntfIndex }
    ::= { ospf3CurCfgVirtIntfTable 1 }
 
Ospf3CurCfgVirtIntfEntry ::= SEQUENCE {
    ospf3CurCfgVirtIntfIndex         Integer32,
    ospf3CurCfgVirtIntfAreaId        INTEGER,
    ospf3CurCfgVirtIntfNbr           IpAddress,
    ospf3CurCfgVirtIntfHello         INTEGER,
    ospf3CurCfgVirtIntfDead          INTEGER,
    ospf3CurCfgVirtIntfTrans         INTEGER,
    ospf3CurCfgVirtIntfRetra         INTEGER,
    ospf3CurCfgVirtIntfStatus        INTEGER 
    }
 
ospf3CurCfgVirtIntfIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The OSPFv3 Virtual Interface number for which the OSPFv3 
         Virtual Interface table is related."
    ::= { ospf3CurCfgVirtIntfEntry 1}

ospf3CurCfgVirtIntfAreaId OBJECT-TYPE
    SYNTAX INTEGER (0..5) 
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The index of the OSPFv3 area to which this virtual interface
         belongs." 
    ::= { ospf3CurCfgVirtIntfEntry 3 }

ospf3CurCfgVirtIntfNbr OBJECT-TYPE
    SYNTAX IpAddress 
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The IP Address of the OSPFv3 neighbor for this virtual interface."
    ::= { ospf3CurCfgVirtIntfEntry 4 }

ospf3CurCfgVirtIntfHello  OBJECT-TYPE 
    SYNTAX INTEGER (1..65535) 
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "Hello interval" 
    ::= { ospf3CurCfgVirtIntfEntry 5 }

ospf3CurCfgVirtIntfDead   OBJECT-TYPE
   SYNTAX INTEGER (1..65535) 
    MAX-ACCESS read-only
    STATUS current 
    DESCRIPTION
    "Dead interval" 
    ::= { ospf3CurCfgVirtIntfEntry 6 }

ospf3CurCfgVirtIntfTrans  OBJECT-TYPE
   SYNTAX INTEGER (1..1800) 
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "Transmit delay" 
    ::= { ospf3CurCfgVirtIntfEntry 7 }
    
ospf3CurCfgVirtIntfRetra OBJECT-TYPE
    SYNTAX INTEGER (1..1800) 
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "Retransmit interval" 
    ::= { ospf3CurCfgVirtIntfEntry 8 }

ospf3CurCfgVirtIntfStatus  OBJECT-TYPE
    SYNTAX  INTEGER {
        disabled(0),
        enabled(1)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "Status
     disabled(0),
        enabled(1)" 
    ::= { ospf3CurCfgVirtIntfEntry 9 }

ospf3NewCfgVirtIntfTable OBJECT-TYPE
    SYNTAX SEQUENCE OF Ospf3NewCfgVirtIntfEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "The table of OSPFv3 Virtual interface in the new configuration block."
    ::= { ospf3Cfg 11 }

ospf3NewCfgVirtIntfEntry OBJECT-TYPE
    SYNTAX Ospf3NewCfgVirtIntfEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "Information about an OSPFv3 virtual interface."
    INDEX { ospf3NewCfgVirtIntfIndex }
    ::= { ospf3NewCfgVirtIntfTable 1 }
 
Ospf3NewCfgVirtIntfEntry ::= SEQUENCE {
    ospf3NewCfgVirtIntfIndex         Integer32,
    ospf3NewCfgVirtIntfAreaId        INTEGER,
    ospf3NewCfgVirtIntfNbr           IpAddress,
    ospf3NewCfgVirtIntfHello         INTEGER,
    ospf3NewCfgVirtIntfDead          INTEGER,
    ospf3NewCfgVirtIntfTrans         INTEGER,
    ospf3NewCfgVirtIntfRetra         INTEGER,
    ospf3NewCfgVirtIntfStatus        INTEGER, 
    ospf3NewCfgVirtIntfDelete        INTEGER
    }
 
ospf3NewCfgVirtIntfIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The OSPFv3 Virtual Interface number for which the OSPFv3 
         Virtual Interface table is related."
    ::= { ospf3NewCfgVirtIntfEntry 1}

ospf3NewCfgVirtIntfAreaId OBJECT-TYPE
    SYNTAX INTEGER (0..5)
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "The index of the OSPFv3 area to which this virtual interface
         belongs." 
    ::= { ospf3NewCfgVirtIntfEntry 3 }

ospf3NewCfgVirtIntfNbr OBJECT-TYPE
    SYNTAX IpAddress 
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "The IP Address of the OSPFv3 neighbor for this virtual interface."
    ::= { ospf3NewCfgVirtIntfEntry 4 }

ospf3NewCfgVirtIntfHello  OBJECT-TYPE 
    SYNTAX INTEGER (1..65535) 
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "Hello interval(1..65535)" 
    ::= { ospf3NewCfgVirtIntfEntry 5 }

ospf3NewCfgVirtIntfDead   OBJECT-TYPE
   SYNTAX INTEGER (1..65535) 
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "Dead interval(1..65535)" 
    ::= { ospf3NewCfgVirtIntfEntry 6 }

ospf3NewCfgVirtIntfTrans  OBJECT-TYPE
   SYNTAX INTEGER (1..1800) 
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "Transmit delay(1..1800)" 
    ::= { ospf3NewCfgVirtIntfEntry 7 }

ospf3NewCfgVirtIntfRetra OBJECT-TYPE
  SYNTAX INTEGER (1..1800) 
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "Retransmit interval(1..1800)" 
    ::= { ospf3NewCfgVirtIntfEntry 8 }

ospf3NewCfgVirtIntfStatus  OBJECT-TYPE
    SYNTAX  INTEGER {
        disabled(0),
        enabled(1)
        }
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "Status 
         disabled(0),
         enabled(1) " 
    ::= { ospf3NewCfgVirtIntfEntry 9 }

ospf3NewCfgVirtIntfDelete  OBJECT-TYPE
    SYNTAX  INTEGER {
        other(0),
        delete(1)
        }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
    "Delete
     other(0),
         delete(1)" 
    ::= { ospf3NewCfgVirtIntfEntry 10}


-- ospfv3 range

ospf3CurCfgRangeTable OBJECT-TYPE
    SYNTAX SEQUENCE OF Ospf3CurCfgRangeEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "The table of OSPFv3 summary range in the current configuration." 
    ::= { ospf3Cfg 12 }

ospf3CurCfgRangeEntry OBJECT-TYPE
    SYNTAX Ospf3CurCfgRangeEntry 
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "Information about an OSPFv3 summary range."
    INDEX { ospf3CurCfgRangeIndex }
    ::= { ospf3CurCfgRangeTable 1 }
 
Ospf3CurCfgRangeEntry ::= SEQUENCE {
    ospf3CurCfgRangeIndex           Integer32,
    ospf3CurCfgRangeAddr             DisplayString,
    ospf3CurCfgRangePrefixLen      INTEGER,
    ospf3CurCfgRangeAreaIndex    Integer32,
    ospf3CurCfgRangeHideState     INTEGER,
    ospf3CurCfgRangeLsaType       INTEGER,
    ospf3CurCfgRangeRouteTag     Unsigned32,
    ospf3CurCfgRangeState            INTEGER
    }
 
ospf3CurCfgRangeIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The range number for which the OSPFv3 summary range table is related." 
    ::= { ospf3CurCfgRangeEntry 1}

ospf3CurCfgRangeAddr OBJECT-TYPE
    SYNTAX DisplayString 
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The IPv6 Address of the range." 
    ::= { ospf3CurCfgRangeEntry 2 }

ospf3CurCfgRangePrefixLen OBJECT-TYPE
    SYNTAX  INTEGER (1..128)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The prefix length of the range."
    ::= { ospf3CurCfgRangeEntry 3 }

ospf3CurCfgRangeAreaIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The area index."
    ::= { ospf3CurCfgRangeEntry 4 }

ospf3CurCfgRangeHideState OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The state of the hide range."
    ::= { ospf3CurCfgRangeEntry 5 }

ospf3CurCfgRangeLsaType OBJECT-TYPE
    SYNTAX  INTEGER {
        summary(8195),
        type7(8199)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The LSA type for aggregation.
        summary(8195),
        type7(8199)"
    ::= { ospf3CurCfgRangeEntry 6 }

ospf3CurCfgRangeRouteTag OBJECT-TYPE
    SYNTAX  Unsigned32 (0..4294967295)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The route tag of the range."
    ::= { ospf3CurCfgRangeEntry 7 }

ospf3CurCfgRangeState OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The state of the range."
    ::= { ospf3CurCfgRangeEntry 8 }

ospf3NewCfgRangeTable OBJECT-TYPE
    SYNTAX SEQUENCE OF Ospf3NewCfgRangeEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "The table of OSPFv3 summary range in the new configuration." 
    ::= { ospf3Cfg 13 }

ospf3NewCfgRangeEntry OBJECT-TYPE
    SYNTAX Ospf3NewCfgRangeEntry 
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "Information about an OSPFv3 summary range."
    INDEX { ospf3NewCfgRangeIndex }
    ::= { ospf3NewCfgRangeTable 1 }
 
Ospf3NewCfgRangeEntry ::= SEQUENCE {
    ospf3NewCfgRangeIndex         Integer32,
    ospf3NewCfgRangeAddr           DisplayString,
    ospf3NewCfgRangePrefixLen   INTEGER,
    ospf3NewCfgRangeAreaIndex Integer32,
    ospf3NewCfgRangeHideState   INTEGER,
    ospf3NewCfgRangeLsaType      INTEGER,
    ospf3NewCfgRangeRouteTag    Unsigned32,
    ospf3NewCfgRangeState          INTEGER,
    ospf3NewCfgRangeDelete        INTEGER
    }
 
ospf3NewCfgRangeIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The range number for which the OSPFv3 summary range table is related." 
    ::= { ospf3NewCfgRangeEntry 1}

ospf3NewCfgRangeAddr OBJECT-TYPE
    SYNTAX  DisplayString  (SIZE(0..40))
    MAX-ACCESS read-create 
    STATUS current
    DESCRIPTION
    "The IPv6 Address of the range.
     Address should be 4-byte haxadecimal colon notation.
     Valid IPv6 address should be in any of the following forms
     xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
     xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx"
    ::= { ospf3NewCfgRangeEntry 2 }

ospf3NewCfgRangePrefixLen OBJECT-TYPE
    SYNTAX  INTEGER (1..128) 
    MAX-ACCESS read-create 
    STATUS current
    DESCRIPTION
    "The prefix length of the range."
    ::= { ospf3NewCfgRangeEntry 3 }

ospf3NewCfgRangeAreaIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-create 
    STATUS current
    DESCRIPTION
        "The area index."
    ::= { ospf3NewCfgRangeEntry 4 }

ospf3NewCfgRangeHideState OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS read-create 
    STATUS  current
    DESCRIPTION
        "The state of the hide range."
    ::= { ospf3NewCfgRangeEntry 5 }

ospf3NewCfgRangeLsaType OBJECT-TYPE
    SYNTAX  INTEGER {
        summary(8195),
        type7(8199)
        }
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "The LSA type for aggregation.
        summary(8195),
        type7(8199)"
    ::= { ospf3NewCfgRangeEntry 6 }

ospf3NewCfgRangeRouteTag OBJECT-TYPE
    SYNTAX  Unsigned32 (0..4294967295)
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "The route tag of the range."
    ::= { ospf3NewCfgRangeEntry 7 }

ospf3NewCfgRangeState OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS read-create 
    STATUS  current
    DESCRIPTION
        "The state of the range."
    ::= { ospf3NewCfgRangeEntry 8 }

ospf3NewCfgRangeDelete OBJECT-TYPE
    SYNTAX  INTEGER {
        other(1),
        delete(2)
        }
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "When set to the value of 2 (delete), the entire row is deleted.
         When read, other(1) is returned. Setting the value to anything
         other than 2(delete) has no effect on the state of the row."
    ::= { ospf3NewCfgRangeEntry 9 }

-- ospfv3 summary prefix

ospf3CurCfgExtRangeTable OBJECT-TYPE
    SYNTAX SEQUENCE OF Ospf3CurCfgExtRangeEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "The table of OSPFv3 AS-External range in the current configuration." 
    ::= { ospf3Cfg 14 }

ospf3CurCfgExtRangeEntry OBJECT-TYPE
    SYNTAX Ospf3CurCfgExtRangeEntry 
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "Information about an OSPFv3 AS-External range."
    INDEX { ospf3CurCfgExtRangeIndex }
    ::= { ospf3CurCfgExtRangeTable 1 }
 
Ospf3CurCfgExtRangeEntry ::= SEQUENCE {
    ospf3CurCfgExtRangeIndex           Integer32,
    ospf3CurCfgExtRangeAddr             DisplayString,
    ospf3CurCfgExtRangePrefixLen      INTEGER,
    ospf3CurCfgExtRangeAreaIndex    Integer32,
    ospf3CurCfgExtRangeTranslation   INTEGER,
    ospf3CurCfgExtRangeAggrEffect   INTEGER,
    ospf3CurCfgExtRangeState            INTEGER
    }
 
ospf3CurCfgExtRangeIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The range number for which the OSPFv3 AS-External range table is related." 
    ::= { ospf3CurCfgExtRangeEntry 1}

ospf3CurCfgExtRangeAddr OBJECT-TYPE
    SYNTAX DisplayString 
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The IPv6 Address of the AS-External range." 
    ::= { ospf3CurCfgExtRangeEntry 2 }

ospf3CurCfgExtRangePrefixLen OBJECT-TYPE
    SYNTAX  INTEGER (1..128)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The prefix length of the AS-External range."
    ::= { ospf3CurCfgExtRangeEntry 3 }

ospf3CurCfgExtRangeAreaIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The area index."
    ::= { ospf3CurCfgExtRangeEntry 4 }

ospf3CurCfgExtRangeTranslation OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The state of the setting the P-bit in the generated LSA."
    ::= { ospf3CurCfgExtRangeEntry 5 }

ospf3CurCfgExtRangeAggrEffect OBJECT-TYPE
    SYNTAX  INTEGER {
        advertise(1),
        not-advertise(2),
        allowAll(3),
        denyAll(4)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The aggregation effect.
        advertise(1),
        not-advertise(2),
        allowAll(3),
        denyAll(4)"
    ::= { ospf3CurCfgExtRangeEntry 6 }

ospf3CurCfgExtRangeState OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The state of the AS-External range."
    ::= { ospf3CurCfgExtRangeEntry 7 }

ospf3NewCfgExtRangeTable OBJECT-TYPE
    SYNTAX SEQUENCE OF Ospf3NewCfgExtRangeEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "The table of OSPFv3 summary AS-External range in the new configuration." 
    ::= { ospf3Cfg 15 }

ospf3NewCfgExtRangeEntry OBJECT-TYPE
    SYNTAX Ospf3NewCfgExtRangeEntry 
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "Information about an OSPFv3 summary AS-External range."
    INDEX { ospf3NewCfgExtRangeIndex }
    ::= { ospf3NewCfgExtRangeTable 1 }
 
Ospf3NewCfgExtRangeEntry ::= SEQUENCE {
    ospf3NewCfgExtRangeIndex          Integer32,
    ospf3NewCfgExtRangeAddr           DisplayString,
    ospf3NewCfgExtRangePrefixLen    INTEGER,
    ospf3NewCfgExtRangeAreaIndex  Integer32,
    ospf3NewCfgExtRangeTranslation  INTEGER,
    ospf3NewCfgExtRangeAggrEffect  INTEGER,
    ospf3NewCfgExtRangeState           INTEGER,
    ospf3NewCfgExtRangeDelete         INTEGER
    }
 
ospf3NewCfgExtRangeIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The range number for which the OSPFv3 AS-External range table is related." 
    ::= { ospf3NewCfgExtRangeEntry 1}

ospf3NewCfgExtRangeAddr OBJECT-TYPE
    SYNTAX  DisplayString  (SIZE(0..40))
    MAX-ACCESS read-create 
    STATUS current
    DESCRIPTION
    "The IPv6 Address of the AS-External range.
     Address should be 4-byte haxadecimal colon notation.
     Valid IPv6 address should be in any of the following forms
     xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
     xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx"
    ::= { ospf3NewCfgExtRangeEntry 2 }

ospf3NewCfgExtRangePrefixLen OBJECT-TYPE
    SYNTAX  INTEGER (1..128) 
    MAX-ACCESS read-create 
    STATUS current
    DESCRIPTION
    "The prefix length of the AS-External range."
    ::= { ospf3NewCfgExtRangeEntry 3 }

ospf3NewCfgExtRangeAreaIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-create 
    STATUS current
    DESCRIPTION
        "The area index."
    ::= { ospf3NewCfgExtRangeEntry 4 }

ospf3NewCfgExtRangeTranslation OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "The state of the setting the P-bit in the generated LSA."
    ::= { ospf3NewCfgExtRangeEntry 5 }

ospf3NewCfgExtRangeAggrEffect OBJECT-TYPE
    SYNTAX  INTEGER {
        advertise(1),
        not-advertise(2),
        allowAll(3),
        denyAll(4)
        }
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "The aggregation effect.
        advertise(1),
        not-advertise(2),
        allowAll(3),
        denyAll(4)"
    ::= { ospf3NewCfgExtRangeEntry 6 }

ospf3NewCfgExtRangeState OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS read-create 
    STATUS  current
    DESCRIPTION
        "The state of the AS-External range."
    ::= { ospf3NewCfgExtRangeEntry 7 }

ospf3NewCfgExtRangeDelete OBJECT-TYPE
    SYNTAX  INTEGER {
        other(1),
        delete(2)
        }
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "When set to the value of 2 (delete), the entire row is deleted.
         When read, other(1) is returned. Setting the value to anything
         other than 2(delete) has no effect on the state of the row."
    ::= { ospf3NewCfgExtRangeEntry 8 }

-- ospfv3 redist entries

ospf3CurCfgRedistTable OBJECT-TYPE
    SYNTAX SEQUENCE OF Ospf3CurCfgRedistEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "The table of OSPFv3 redistribution entries in the current configuration." 
    ::= { ospf3Cfg 16 }

ospf3CurCfgRedistEntry OBJECT-TYPE
    SYNTAX Ospf3CurCfgRedistEntry 
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "Information about an OSPFv3 redistribution entry."
    INDEX { ospf3CurCfgRedistIndex }
    ::= { ospf3CurCfgRedistTable 1 }
 
Ospf3CurCfgRedistEntry ::= SEQUENCE {
    ospf3CurCfgRedistIndex           Integer32,
    ospf3CurCfgRedistAddr             DisplayString,
    ospf3CurCfgRedistPrefixLen      INTEGER,
    ospf3CurCfgRedistMetric           INTEGER,
    ospf3CurCfgRedistMetricType   INTEGER,
    ospf3CurCfgRedistRouteTagTypeManual  INTEGER,
    ospf3CurCfgRedistRouteTag     Unsigned32,
    ospf3CurCfgRedistState            INTEGER
    }
 
ospf3CurCfgRedistIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The redistribution entry number for which the OSPFv3 redistribution entry table is related." 
    ::= { ospf3CurCfgRedistEntry 1}

ospf3CurCfgRedistAddr OBJECT-TYPE
    SYNTAX DisplayString 
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The IPv6 Address of the redistribution entry." 
    ::= { ospf3CurCfgRedistEntry 2 }

ospf3CurCfgRedistPrefixLen OBJECT-TYPE
    SYNTAX  INTEGER (1..128)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The prefix length of the redistribution entry."
    ::= { ospf3CurCfgRedistEntry 3 }

ospf3CurCfgRedistMetric OBJECT-TYPE
    SYNTAX  INTEGER (1..16777215)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The metric to be applied to the route."
    ::= { ospf3CurCfgRedistEntry 4 }

ospf3CurCfgRedistMetricType OBJECT-TYPE
    SYNTAX  INTEGER {
        asExttype1(3),
        asExttype2(4)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The metric type.
        asExttype1(3),
        asExttype2(4)"
    ::= { ospf3CurCfgRedistEntry 5 }

ospf3CurCfgRedistRouteTag OBJECT-TYPE
    SYNTAX  Unsigned32 (0..4294967295)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The route tag of the redistribution entry."
    ::= { ospf3CurCfgRedistEntry 6 }
    
ospf3CurCfgRedistRouteTagTypeManual OBJECT-TYPE
    SYNTAX  INTEGER {
         auto(0),
         manual(1)
         }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "Indicates if the route tag is set manually. "
    ::= { ospf3CurCfgRedistEntry 7 }

ospf3CurCfgRedistState OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The state of the redistribution entry."
    ::= { ospf3CurCfgRedistEntry 8 }

ospf3NewCfgRedistTable OBJECT-TYPE
    SYNTAX SEQUENCE OF Ospf3NewCfgRedistEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "The table of OSPFv3 summary redistribution entry in the new configuration." 
    ::= { ospf3Cfg 17 }

ospf3NewCfgRedistEntry OBJECT-TYPE
    SYNTAX Ospf3NewCfgRedistEntry 
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "Information about an OSPFv3 summary redistribution entry."
    INDEX { ospf3NewCfgRedistIndex }
    ::= { ospf3NewCfgRedistTable 1 }
 
Ospf3NewCfgRedistEntry ::= SEQUENCE {
    ospf3NewCfgRedistIndex          Integer32,
    ospf3NewCfgRedistAddr            DisplayString,
    ospf3NewCfgRedistPrefixLen    INTEGER,
    ospf3NewCfgRedistMetric          INTEGER,
    ospf3NewCfgRedistMetricType  INTEGER,
    ospf3NewCfgRedistRouteTagTypeManual INTEGER,
    ospf3NewCfgRedistRouteTag    Unsigned32,
    ospf3NewCfgRedistState           INTEGER,
    ospf3NewCfgRedistDelete         INTEGER
    }
 
ospf3NewCfgRedistIndex OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The redistribution entry number for which the OSPFv3 redistribution entry table is related." 
    ::= { ospf3NewCfgRedistEntry 1}

ospf3NewCfgRedistAddr OBJECT-TYPE
    SYNTAX  DisplayString  (SIZE(0..40))
    MAX-ACCESS read-create 
    STATUS current
    DESCRIPTION
    "The IPv6 Address of the redistribution entry.
     Address should be 4-byte haxadecimal colon notation.
     Valid IPv6 address should be in any of the following forms
     xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
     xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx"
    ::= { ospf3NewCfgRedistEntry 2 }

ospf3NewCfgRedistPrefixLen OBJECT-TYPE
    SYNTAX  INTEGER (1..128) 
    MAX-ACCESS read-create 
    STATUS current
    DESCRIPTION
    "The prefix length of the redistribution entry."
    ::= { ospf3NewCfgRedistEntry 3 }

ospf3NewCfgRedistMetric OBJECT-TYPE
    SYNTAX  INTEGER (1..16777215)
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "The metric to be applied to the route."
    ::= { ospf3NewCfgRedistEntry 4 }

ospf3NewCfgRedistMetricType OBJECT-TYPE
    SYNTAX  INTEGER {
        asExttype1(3),
        asExttype2(4)
        }
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "The metric type.
        asExttype1(3),
        asExttype2(4)"
    ::= { ospf3NewCfgRedistEntry 5 }

ospf3NewCfgRedistRouteTag OBJECT-TYPE
    SYNTAX  Unsigned32 (0..4294967295)
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "The route tag of the redistribution entry."
    ::= { ospf3NewCfgRedistEntry 6 }

ospf3NewCfgRedistRouteTagTypeManual OBJECT-TYPE
    SYNTAX  INTEGER {
         auto(0),
         manual(1)
         }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
    "Indicates if the route tag is set manually. "
    ::= { ospf3NewCfgRedistEntry 7 }
    
ospf3NewCfgRedistState OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS read-create 
    STATUS  current
    DESCRIPTION
        "The state of the redistribution entry."
    ::= { ospf3NewCfgRedistEntry 8 }

ospf3NewCfgRedistDelete OBJECT-TYPE
    SYNTAX  INTEGER {
        other(1),
        delete(2)
        }
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "When set to the value of 2 (delete), the entire row is deleted.
         When read, other(1) is returned. Setting the value to anything
         other than 2(delete) has no effect on the state of the row."
    ::= { ospf3NewCfgRedistEntry 9 }
    
    
ospf3RouteRedistribution   OBJECT IDENTIFIER ::= { ospf3Cfg 18 }

ospf3RedistributeConnected    OBJECT IDENTIFIER ::= { ospf3RouteRedistribution 1 }

ospf3CurCfgConnectedMetric OBJECT-TYPE
    SYNTAX INTEGER (0..16777214)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The metric to be assigned to Connected routes." 
    ::= { ospf3RedistributeConnected 1 }

ospf3NewCfgConnectedMetric OBJECT-TYPE
    SYNTAX INTEGER (0..16777214)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
    "The metric to be assigned to Connected routes." 
    ::= { ospf3RedistributeConnected 2 }

ospf3CurCfgConnectedMetricType OBJECT-TYPE
    SYNTAX INTEGER {
        none(1),
        type1(2),
        type2(3)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The AS External metric type for Connected routes."
    ::= { ospf3RedistributeConnected 3 }

ospf3NewCfgConnectedMetricType OBJECT-TYPE
    SYNTAX INTEGER {
        none(1),
        type1(2),
        type2(3)
        }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
    "The AS External metric type for Connected routes."
    ::= { ospf3RedistributeConnected 4 }

ospf3CurCfgConnectedRouteTag OBJECT-TYPE
    SYNTAX Unsigned32 (0..4294967295)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Assigned route tag "
    ::= { ospf3RedistributeConnected 5 }

ospf3NewCfgConnectedRouteTag OBJECT-TYPE
    SYNTAX Unsigned32 (0..4294967295)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Assigned route tag "
    ::= { ospf3RedistributeConnected 6 }

ospf3CurCfgConnectedRouteTagTypeManual OBJECT-TYPE
    SYNTAX INTEGER {
        auto(0),
        manual(1)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Indicates if the route tag is set manually."
    ::= { ospf3RedistributeConnected 7 }

ospf3NewCfgConnectedRouteTagTypeManual OBJECT-TYPE
    SYNTAX INTEGER {
        auto(0),
        manual(1)
        }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Indicates if the route tag is set manually."
    ::= { ospf3RedistributeConnected 8 }
    
ospf3RedistributeStatic    OBJECT IDENTIFIER ::= { ospf3RouteRedistribution 2 }

ospf3CurCfgStaticMetric OBJECT-TYPE
    SYNTAX INTEGER (0..16777214)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The metric to be assigned to static routes." 
    ::= { ospf3RedistributeStatic 1 }

ospf3NewCfgStaticMetric OBJECT-TYPE
    SYNTAX INTEGER (0..16777214)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
    "The metric to be assigned to static routes." 
    ::= { ospf3RedistributeStatic 2 }

ospf3CurCfgStaticMetricType OBJECT-TYPE
    SYNTAX INTEGER {
        none(1),
        type1(2),
        type2(3)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The AS External metric type for static routes."
    ::= { ospf3RedistributeStatic 3 }

ospf3NewCfgStaticMetricType OBJECT-TYPE
    SYNTAX INTEGER {
        none(1),
        type1(2),
        type2(3)
        }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
    "The AS External metric type for static routes."
    ::= { ospf3RedistributeStatic 4 }

ospf3CurCfgStaticRouteTag OBJECT-TYPE
    SYNTAX Unsigned32 (0..4294967295)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Assigned route tag "
    ::= { ospf3RedistributeStatic 5 }

ospf3NewCfgStaticRouteTag OBJECT-TYPE
    SYNTAX Unsigned32 (0..4294967295)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Assigned route tag "
    ::= { ospf3RedistributeStatic 6 }

ospf3CurCfgStaticRouteTagTypeManual OBJECT-TYPE
    SYNTAX INTEGER {
        auto(0),
        manual(1)
        }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Indicates if the route tag is set manually."
    ::= { ospf3RedistributeStatic 7 }

ospf3NewCfgStaticRouteTagTypeManual OBJECT-TYPE
    SYNTAX INTEGER {
        auto(0),
        manual(1)
        }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Indicates if the route tag is set manually."
    ::= { ospf3RedistributeStatic 8 }


ipv6PmtuCurTimeout OBJECT-TYPE
    SYNTAX INTEGER 
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "IPv6 PMTU Expired Time Value(0|10-100), 0 indicates INFINITY. Other values should be in [10, 100]"
    ::= { ipv6pmtuCfg 1 }

ipv6PmtuNewTimeout OBJECT-TYPE
    SYNTAX INTEGER 
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "IPv6 PMTU Expired Time Value(0|10-100), 0 indicates INFINITY. Other values should be in [10, 100]"
    ::= { ipv6pmtuCfg 2 }

ipv6PmtuEntriesClearAll OBJECT-TYPE
    SYNTAX INTEGER {
          ok(1),
          clear(2)
          }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
          "When set to clear(2),clears all ipv6 PMTU entries. Otherwhise nothing is done."
    ::= { ipv6pmtuCfg 3}

ipCurCfgRouterID OBJECT-TYPE
    SYNTAX IpAddress 
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The router ID of the switch." 
    ::= { ipGeneralCfg 1 }

ipNewCfgRouterID OBJECT-TYPE
    SYNTAX IpAddress 
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
    "The router ID of the switch." 
    ::= { ipGeneralCfg 2 }

ipFloodCurCfgFlood OBJECT-TYPE
    SYNTAX  INTEGER  {
        enabled(1),
        disabled(0)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable flooding unregistered IPMCs"
    ::= { ipGeneralCfg 3 }

ipFloodNewCfgFlood OBJECT-TYPE
    SYNTAX  INTEGER  {
        enabled(1),
        disabled(0)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable or disable flooding unregistered IPMCs"
    ::= { ipGeneralCfg 4 }



-- IGMP config

igmpCurCfgOnOff OBJECT-TYPE
    SYNTAX INTEGER { 
        on(1),
        off(2)
    }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Globally turn IGMP On/Off."
    ::= { igmpCfg 1}

igmpNewCfgOnOff OBJECT-TYPE
    SYNTAX INTEGER { 
        on(1),
        off(2)
    }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Globally turn IGMP On/Off."
    ::= { igmpCfg 2}


igmpSnoopCfg      OBJECT IDENTIFIER ::= { igmpCfg 9 }

-- IGMP Snooping config
igmpSnoopCurCfgMrto OBJECT-TYPE
    SYNTAX  Integer32 
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The value of multicast router timeout in the current config."
    ::= { igmpSnoopCfg 7 }

igmpSnoopNewCfgMrto OBJECT-TYPE
    SYNTAX  Integer32 
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The value of multicast router timeout in the new config."
    ::= { igmpSnoopCfg 8 }

igmpSnoopCurCfgAggrEnaDis OBJECT-TYPE
    SYNTAX INTEGER {
       enable(1),
       disable(2)
      }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable/Disable of IGMP Report aggregation."
    ::= { igmpSnoopCfg 9}

igmpSnoopNewCfgAggrEnaDis OBJECT-TYPE
    SYNTAX INTEGER {
        enable(1),
        disable(2)
      }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable/Disable of IGMP Report aggregation."
    ::= { igmpSnoopCfg 10}
igmpSnoopCurCfgEnaDis OBJECT-TYPE
    SYNTAX INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The current status of IGMP Snooping."
    ::= { igmpSnoopCfg 11}

igmpSnoopNewCfgEnaDis OBJECT-TYPE
    SYNTAX INTEGER {
        enable(1),
        disable(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Set Enable/Disable of IGMP Snooping."
    ::= { igmpSnoopCfg 12}

igmpSnoopNewCfgVlanAdd OBJECT-TYPE
    SYNTAX  Integer32 
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The VLAN to be added to snooping vlan list. When read,
         0 is returned."
    ::= { igmpSnoopCfg 13 }

igmpSnoopNewCfgVlanRem OBJECT-TYPE
    SYNTAX  Integer32 
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The VLAN to be removed from snooping vlan list. When read,
         0 is returned."
    ::= { igmpSnoopCfg 14 }

igmpSnoopNewCfgVlanClear OBJECT-TYPE
    SYNTAX  INTEGER {
        clear(1),
        ok(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Removing ALL Snooping Vlans."
    ::= { igmpSnoopCfg 15 }

igmpSnoopCurCfgVlanBmap OBJECT-TYPE
    SYNTAX OCTET STRING
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The snooping vlans present in the vlan map list.
         The snooping vlans are presented in a bitmap format.

         in receiving order:

         OCTET 1  OCTET 2  .....
         xxxxxxxx xxxxxxxx .....
         ||    || |_ Vlan 9
         ||    ||
         ||    ||___ Vlan 8
         ||    |____ Vlan 7
         ||      .    .   .
         ||_________ Vlan 2
         |__________ Vlan 1

         where x : 1 - The represented vlan has snoop enabled
         0 - The represented vlan does not have snooping enabled."
    ::= { igmpSnoopCfg 16 }

igmpSnoopNewCfgVlanBmap OBJECT-TYPE
    SYNTAX OCTET STRING
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The snooping vlans present in the vlan map list.
         The snooping vlans are presented in a bitmap format.

         in receiving order:

         OCTET 1  OCTET 2  .....
         xxxxxxxx xxxxxxxx .....
         ||    || |_ Vlan 9
         ||    ||
         ||    ||___ Vlan 8
         ||    |____ Vlan 7
         ||      .    .   .
         ||_________ Vlan 2
         |__________ Vlan 1

         where x : 1 - The represented vlan has snoop enabled
         0 - The represented vlan does not have snooping enabled."
    ::= { igmpSnoopCfg 17 }

igmpSnoopNewCfgVlanFastlvAdd OBJECT-TYPE
    SYNTAX  Integer32 
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The VLAN to be added to quick-leave vlan list. When read,
         0 is returned."
    ::= { igmpSnoopCfg 18 }

igmpSnoopNewCfgVlanFastlvRem OBJECT-TYPE
    SYNTAX  Integer32 
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The VLAN to be removed from quick-leave vlan list. When read,
         0 is returned."
    ::= { igmpSnoopCfg 19 }

igmpSnoopCurCfgVlanFastlvBmap OBJECT-TYPE
    SYNTAX OCTET STRING
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The fast-leave enabled vlans present in the vlan map list.
         The fast-leave enabled vlans are presented in a bitmap format.

         in receiving order:

         OCTET 1  OCTET 2  .....
         xxxxxxxx xxxxxxxx .....
         ||    || |_ Vlan 9
         ||    ||
         ||    ||___ Vlan 8
         ||    |____ Vlan 7
         ||      .    .   .
         ||_________ Vlan 2
         |__________ Vlan 1

         where x : 1 - The represented vlan has fast-leave enabled
         0 - The represented vlan does not have fast-leave enabled."
    ::= { igmpSnoopCfg 20 }

igmpSnoopNewCfgVlanFastlvBmap OBJECT-TYPE
    SYNTAX OCTET STRING
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The fast-leave enabled vlans present in the vlan map list.
         The fast-leave enabled vlans are presented in a bitmap format.

         in receiving order:

         OCTET 1  OCTET 2  .....
         xxxxxxxx xxxxxxxx .....
         ||    || |_ Vlan 9
         ||    ||
         ||    ||___ Vlan 8
         ||    |____ Vlan 7
         ||      .    .   .
         ||_________ Vlan 2
         |__________ Vlan 1

         where x : 1 - The represented vlan has fast-leave enabled
         0 - The represented vlan does not have fast-leave enabled."
    ::= { igmpSnoopCfg 21 }

igmpSnoopCurCfgTimeout OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Query Response Interval."
    ::= { igmpSnoopCfg 22 }

igmpSnoopNewCfgTimeout OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Query Response Interval."
    ::= { igmpSnoopCfg 23 }

igmpSnoopCurCfgQInterval OBJECT-TYPE
    SYNTAX  Integer32 
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "IGMP Query Interval of current config."
    ::= { igmpSnoopCfg 24 }

igmpSnoopNewCfgQInterval OBJECT-TYPE
    SYNTAX  Integer32 
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "IGMP Query Interval of new config."
    ::= { igmpSnoopCfg 25 }

igmpSnoopCurCfgSrcIp OBJECT-TYPE
    SYNTAX IpAddress 
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The source ip for GSQ proxy in current config." 
    ::= { igmpSnoopCfg 26 }

igmpSnoopNewCfgSrcIp OBJECT-TYPE
    SYNTAX IpAddress 
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
    "The source ip for GSQ proxy in new config." 
    ::= { igmpSnoopCfg 27 }

igmpSnoopCurCfgFlood OBJECT-TYPE
    SYNTAX INTEGER {
        enable(1),
        disable(2)
      }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable/Disable of flood unregistered IPMC"
    ::= { igmpSnoopCfg 29}

igmpSnoopNewCfgFlood OBJECT-TYPE
    SYNTAX INTEGER {
        enable(1),
        disable(2)
      }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable/Disable of flood unregistered IPMC"
    ::= { igmpSnoopCfg 30}


igmpSnoopSetToDefault OBJECT-TYPE
    SYNTAX INTEGER {
        none(1),
        setDefault(2)
      }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "When setting the value setDefault(2), the IGMP Snooping configuration 
         is set to the default values. When reading, none(1) is always
         returned."
    ::= { igmpSnoopCfg 33}

igmpSnoopCurCfgRtrAlert OBJECT-TYPE
    SYNTAX  INTEGER{
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable/disable sending IGMP messages with Router Alert option."
    ::= { igmpSnoopCfg 34 }

igmpSnoopNewCfgRtrAlert OBJECT-TYPE
    SYNTAX  INTEGER{
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable/disable sending IGMP messages with Router Alert option."
    ::= { igmpSnoopCfg 35 }

igmpSnoopCurCfgRobustness OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "IGMP Robustness variable of current config."
    ::= { igmpSnoopCfg 36 }

igmpSnoopNewCfgRobustness OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "IGMP Robustness variable of new config."
    ::= { igmpSnoopCfg 37 }

igmpStaticMrtrCfg OBJECT IDENTIFIER ::= { igmpCfg 10 }
igmpFilterCfg     OBJECT IDENTIFIER ::= { igmpCfg 11 }

igmpV3SnoopCfg      OBJECT IDENTIFIER ::= { igmpCfg 14 }

igmpV3SnoopCurCfgSources OBJECT-TYPE
    SYNTAX  Integer32 
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Number of sources to snoop in a group record in current config."
    ::= { igmpV3SnoopCfg 1 }

igmpV3SnoopNewCfgSources OBJECT-TYPE
    SYNTAX  Integer32 
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Number of sources to snoop in a group record in new config."
    ::= { igmpV3SnoopCfg 2 }

igmpV3SnoopCurCfgEnaDis OBJECT-TYPE
    SYNTAX INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The current status of IGMP V3 Snooping."
    ::= { igmpV3SnoopCfg 3 }

igmpV3SnoopNewCfgEnaDis OBJECT-TYPE
    SYNTAX INTEGER {
        enable(1),
        disable(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Set Enable/Disable of IGMP V3 Snooping."
    ::= { igmpV3SnoopCfg 4 }

igmpV3SnoopCurCfgExcludeEnaDis OBJECT-TYPE
    SYNTAX INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The current status of IGMP V3 EXCLUDE filter-mode Snooping."
    ::= { igmpV3SnoopCfg 5 }

igmpV3SnoopNewCfgExcludeEnaDis OBJECT-TYPE
    SYNTAX INTEGER {
        enable(1),
        disable(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Set Enable/Disable of IGMP V3 EXCLUDE filter-mode Snooping."
    ::= { igmpV3SnoopCfg 6 }

igmpV3SnoopCurCfgV1V2EnaDis OBJECT-TYPE
    SYNTAX INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The current status of IGMP V1/V2 Report Snooping."
    ::= { igmpV3SnoopCfg 7 }

igmpV3SnoopNewCfgV1V2EnaDis OBJECT-TYPE
    SYNTAX INTEGER {
        enable(1),
        disable(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Set Enable/Disable of IGMP V1/V2 Report Snooping."
    ::= { igmpV3SnoopCfg 8 }


-- IGMP Static Mrtr Support
igmpStaticMrtrCurCfgTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF IgmpStaticMrtrCurCfgTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The IGMP Static Multicast Router table in the current configuration block."
    ::= { igmpStaticMrtrCfg 1 }

igmpStaticMrtrCurCfgTableEntry OBJECT-TYPE
    SYNTAX  IgmpStaticMrtrCurCfgTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A row in the Static Multicast Router table."
    INDEX   { igmpStaticMrtrCurCfgIndx }
    ::= { igmpStaticMrtrCurCfgTable 1 }

IgmpStaticMrtrCurCfgTableEntry ::= SEQUENCE {
    igmpStaticMrtrCurCfgIndx         INTEGER,
    igmpStaticMrtrCurCfgPortId       PortNumber,
    igmpStaticMrtrCurCfgVlanId       INTEGER,
    igmpStaticMrtrCurCfgVersion      INTEGER
    }

igmpStaticMrtrCurCfgIndx OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The IGMP Multicast Router table port index."
    ::= { igmpStaticMrtrCurCfgTableEntry 1 }

igmpStaticMrtrCurCfgPortId OBJECT-TYPE
    SYNTAX  PortNumber
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The IGMP Multicast Router port in the current configuration block."
    ::= { igmpStaticMrtrCurCfgTableEntry 2 }

igmpStaticMrtrCurCfgVlanId OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The IGMP Multicast Router port in the current configuration block."
    ::= { igmpStaticMrtrCurCfgTableEntry 3 }

igmpStaticMrtrCurCfgVersion OBJECT-TYPE
    SYNTAX  INTEGER {
        version1(1),
        version2(2),
        version3(3)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The IGMP version of the IGMP Static Multicast Router."
    ::= { igmpStaticMrtrCurCfgTableEntry 4 }

igmpStaticMrtrNewCfgTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF IgmpStaticMrtrNewCfgTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The IGMP Static Multicast Router table in the new configuration block."
    ::= { igmpStaticMrtrCfg 2 }

igmpStaticMrtrNewCfgTableEntry OBJECT-TYPE
    SYNTAX  IgmpStaticMrtrNewCfgTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A row in the Static Multicast Router table."
    INDEX   { igmpStaticMrtrNewCfgIndx }
    ::= { igmpStaticMrtrNewCfgTable 1 }

IgmpStaticMrtrNewCfgTableEntry ::= SEQUENCE {
    igmpStaticMrtrNewCfgIndx         INTEGER,
    igmpStaticMrtrNewCfgPortId       PortNumber,
    igmpStaticMrtrNewCfgVlanId       INTEGER,
    igmpStaticMrtrNewCfgVersion      INTEGER,
    igmpStaticMrtrNewCfgDelete       INTEGER
    }

igmpStaticMrtrNewCfgIndx OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The IGMP Multicast Router table port index."
    ::= { igmpStaticMrtrNewCfgTableEntry 1 }

igmpStaticMrtrNewCfgPortId OBJECT-TYPE
    SYNTAX  PortNumber
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The IGMP Multicast Router port in the new configuration block."
    ::= { igmpStaticMrtrNewCfgTableEntry 2 }

igmpStaticMrtrNewCfgVlanId OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The IGMP Multicast Router port in the new configuration block."
    ::= { igmpStaticMrtrNewCfgTableEntry 3 }

igmpStaticMrtrNewCfgVersion OBJECT-TYPE
    SYNTAX  INTEGER {
        version1(1),
        version2(2),
        version3(3)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The IGMP version of the IGMP Static Multicast Router."
    ::= { igmpStaticMrtrNewCfgTableEntry 4 }

igmpStaticMrtrNewCfgDelete OBJECT-TYPE
    SYNTAX  INTEGER {
        other(1),
        delete(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "When set to the value of 2 (delete), the entire row is deleted.
         When read, other(1) is returned. Setting the value to anything
         other than 2(delete) has no effect on the state of the row."
    ::= { igmpStaticMrtrNewCfgTableEntry 5 }

igmpStaticMrtrNewCfgClear OBJECT-TYPE
    SYNTAX  INTEGER {
        other(1),
        clear(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "When set to the value of 2 (clear), the entire table is deleted.
         When read, other(1) is returned. Setting the value to anything
         other than 2(clear) has no effect on the table."
    ::= { igmpStaticMrtrCfg 3 }


-- IGMP Filtering
igmpFltCurCfgTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF IgmpFltCurCfgTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The IGMP filtering table in the current configuration block."
    ::= { igmpFilterCfg 1 }

igmpFltCurCfgTableEntry OBJECT-TYPE
    SYNTAX  IgmpFltCurCfgTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A row in the filtering table."
    INDEX   { igmpFltCurCfgIndx }
    ::= { igmpFltCurCfgTable 1 }

IgmpFltCurCfgTableEntry ::= SEQUENCE {
    igmpFltCurCfgIndx         INTEGER,
    igmpFltCurCfgMcastIp1     IpAddress,
    igmpFltCurCfgMcastIp2     IpAddress,
    igmpFltCurCfgAction       INTEGER,
    igmpFltCurCfgState        INTEGER
    }

igmpFltCurCfgIndx OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The IGMP filter table index."
    ::= { igmpFltCurCfgTableEntry 1 }

igmpFltCurCfgMcastIp1 OBJECT-TYPE
    SYNTAX  IpAddress
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Range1 Multicast IP address to be filtered."
    ::= { igmpFltCurCfgTableEntry 2 }

igmpFltCurCfgMcastIp2 OBJECT-TYPE
    SYNTAX  IpAddress
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Range2 Multicast IP address to be filtered."
    ::= { igmpFltCurCfgTableEntry 3 }

igmpFltCurCfgAction OBJECT-TYPE
    SYNTAX  INTEGER {
        allow(1),
        deny(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The action for the IGMP filtering rule."
    ::= { igmpFltCurCfgTableEntry 4 }

igmpFltCurCfgState OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The state of this IGMP filtering rule."
    ::= { igmpFltCurCfgTableEntry 5 }

igmpFltNewCfgTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF IgmpFltNewCfgTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The IGMP filtering table in the current configuration block."
    ::= { igmpFilterCfg 2 }

igmpFltNewCfgTableEntry OBJECT-TYPE
    SYNTAX  IgmpFltNewCfgTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A row in the filtering table."
    INDEX   { igmpFltNewCfgIndx }
    ::= { igmpFltNewCfgTable 1 }

IgmpFltNewCfgTableEntry ::= SEQUENCE {
    igmpFltNewCfgIndx         INTEGER,
    igmpFltNewCfgMcastIp1     IpAddress,
    igmpFltNewCfgMcastIp2     IpAddress,
    igmpFltNewCfgAction       INTEGER,
    igmpFltNewCfgState        INTEGER,
    igmpFltNewCfgDelete       INTEGER
    }

igmpFltNewCfgIndx OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-only 
    STATUS  current
    DESCRIPTION
        "The IGMP filter table index."
    ::= { igmpFltNewCfgTableEntry 1 }

igmpFltNewCfgMcastIp1 OBJECT-TYPE
    SYNTAX  IpAddress
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Range1 Multicast source IP address to be filtered."
    ::= { igmpFltNewCfgTableEntry 2 }

igmpFltNewCfgMcastIp2 OBJECT-TYPE
    SYNTAX  IpAddress
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Range2 Multicast source IP address to be filtered."
    ::= { igmpFltNewCfgTableEntry 3 }

igmpFltNewCfgAction OBJECT-TYPE
    SYNTAX  INTEGER {
        allow(1),
        deny(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The action for the IGMP filtering rule."
    ::= { igmpFltNewCfgTableEntry 4 }

igmpFltNewCfgState OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The state of this IGMP filtering rule."
    ::= { igmpFltNewCfgTableEntry 5 }

igmpFltNewCfgDelete OBJECT-TYPE
    SYNTAX  INTEGER {
        other(1),
        delete(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "When set to the value of 2 (delete), the entire row is deleted. 
         When read, other(1) is returned. Setting the value to anything 
         other than 2(delete) has no effect on the state of the row."
    ::= { igmpFltNewCfgTableEntry 6 }

-- IGMP Filtering Port Table

igmpFltCurCfgPortTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF IgmpFltCurCfgPortTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The IGMP filtering port table in the current configuration block."
    ::= { igmpFilterCfg 3 }

igmpFltCurCfgPortTableEntry OBJECT-TYPE
    SYNTAX  IgmpFltCurCfgPortTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A row in the IGMP filtering port table."
    INDEX   { igmpFltCurCfgPortIndx }
    ::= { igmpFltCurCfgPortTable 1 }

IgmpFltCurCfgPortTableEntry ::= SEQUENCE {
    igmpFltCurCfgPortIndx         PortNumber,
    igmpFltCurCfgPortState        INTEGER,
    igmpFltCurCfgPortFiltBmap     OCTET STRING
    }

igmpFltCurCfgPortIndx OBJECT-TYPE
    SYNTAX  PortNumber
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The port index."
    ::= { igmpFltCurCfgPortTableEntry 1 }

igmpFltCurCfgPortState OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable or disable IGMP filtering."
    ::= { igmpFltCurCfgPortTableEntry 2 }

igmpFltCurCfgPortFiltBmap OBJECT-TYPE
    SYNTAX  OCTET STRING (SIZE(0..256))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
    "The IGMP filtering rules applied to the port.  The filtering rules are 
         presented in bitmap format.

     in receiving order:

         OCTET 1  OCTET 2  .....
             xxxxxxxx xxxxxxxx ..... 
             ||    || |_ filter 9
             ||    ||  
             ||    ||___ filter 8
             ||    |____ filter 7
             ||      .    .   .
             ||_________ filter 2
             |__________ filter 1 (as index to igmpFltCurCfgTable)

         where x : 1 - The represented IGMP filter rule applied to the port
           0 - The represented IGMP filter rule not applied to the port "
    ::= { igmpFltCurCfgPortTableEntry 3 }

igmpFltNewCfgPortTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF IgmpFltNewCfgPortTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The IGMP filtering port table in the new configuration block."
    ::= { igmpFilterCfg 4 }

igmpFltNewCfgPortTableEntry OBJECT-TYPE
    SYNTAX  IgmpFltNewCfgPortTableEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A row in the IGMP filtering port table."
    INDEX   { igmpFltNewCfgPortIndx }
    ::= { igmpFltNewCfgPortTable 1 }

IgmpFltNewCfgPortTableEntry ::= SEQUENCE {
    igmpFltNewCfgPortIndx         PortNumber,
    igmpFltNewCfgPortState        INTEGER,
    igmpFltNewCfgPortFiltBmap     OCTET STRING,
    igmpFltNewCfgPortAddFiltRule  INTEGER,
    igmpFltNewCfgPortRemFiltRule  INTEGER
    }

igmpFltNewCfgPortIndx OBJECT-TYPE
    SYNTAX  PortNumber
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The port index."
    ::= { igmpFltNewCfgPortTableEntry 1 }

igmpFltNewCfgPortState OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable or disable IGMP filtering."
    ::= { igmpFltNewCfgPortTableEntry 2 }

igmpFltNewCfgPortFiltBmap OBJECT-TYPE
    SYNTAX  OCTET STRING (SIZE(0..256))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The IGMP filtering rules applied to the port.  The filtering rules
         are presented in bitmap format.

         in receiving order:

         OCTET 1  OCTET 2  .....
             xxxxxxxx xxxxxxxx ..... 
             ||    || |_ filter 9
             ||    ||  
             ||    ||___ filter 8
             ||    |____ filter 7
             ||      .    .   .
             ||_________ filter 2
             |__________ filter 1 (as index to fltNewCfgTable)

         where x : 1 - The represented filter rule applied to the port
           0 - The represented filter rule not applied to the port "
    ::= { igmpFltNewCfgPortTableEntry 3 }

igmpFltNewCfgPortAddFiltRule OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "This is an action object to add filtering rule to a port. The value 
         specified with this object is the index to the fltNewCfgTable for 
         which filtering rule to be added to the port. The range of the 
         valid index is between 1 and igmpFltCurCfgTableMaxSize. When read, the 
         value '0' is returned always."
    ::= { igmpFltNewCfgPortTableEntry 4 }

igmpFltNewCfgPortRemFiltRule OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "This is an action object to remove filtering rule from a port. The 
         value specified with this object is the index to the fltNewCfgTable 
         for which filtering rule to be removed from the port. The range of 
         the valid index is between 1 and igmpFltCurCfgTableMaxSize.  When read, 
         the value '0' is returned always."
    ::= { igmpFltNewCfgPortTableEntry 5 }

igmpFltCurCfgEnaDis OBJECT-TYPE
    SYNTAX INTEGER { 
        enable(1),
        disable(2)
    }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Enable/Disable of IGMP Filtering."
    ::= { igmpFilterCfg 5 }

igmpFltNewCfgEnaDis OBJECT-TYPE
    SYNTAX INTEGER { 
        enable(1),
        disable(2)
    }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Enable/Disable of IGMP Filtering."
    ::= { igmpFilterCfg 6 }



igmpCurQurCfgTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF IgmpCurQurCfgEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table of IGMP querier configuration."
    ::= { igmpCfg 15 }

igmpCurQurCfgEntry OBJECT-TYPE
    SYNTAX  IgmpCurQurCfgEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A row in the IGMP querier configuration table"
    INDEX   { igmpCurQurCfgVlanIndex }
    ::= { igmpCurQurCfgTable 1 }

IgmpCurQurCfgEntry ::= SEQUENCE {
    igmpCurQurCfgVlanIndex             INTEGER,
    igmpCurQuerierState                INTEGER,
    igmpCurCfgQuerier                  INTEGER,
    igmpCurCfgQueryInterval            INTEGER,
    igmpCurCfgQurSrcIp                 IpAddress,
    igmpCurCfgElectionType             INTEGER,
    igmpCurCfgQurRobustness            INTEGER,
    igmpCurCfgQurStartupCnt            INTEGER,
    igmpCurCfgQurStartupInt            INTEGER,
    igmpCurCfgQurMaxRespTime           INTEGER,
    igmpCurCfgOtherQurAddress          DisplayString,
    igmpCurCfgOtherQurPresentInt       DisplayString,
    igmpCurCfgVlanOperVersion          INTEGER,
    igmpCurVlanOperVersion             INTEGER, 
    igmpCurVlanOlderVerTimer           DisplayString
    }

igmpCurQurCfgVlanIndex OBJECT-TYPE
    SYNTAX  INTEGER(1..4094)
    MAX-ACCESS  read-only
    STATUS current
    DESCRIPTION
        "The vlan number for which the IGMP querier information is related."
    ::= { igmpCurQurCfgEntry 1}

igmpCurQuerierState OBJECT-TYPE
    SYNTAX  INTEGER { 
    querier(1),
    nonQuerier(2),
    checkingMembership(3)
    }
    MAX-ACCESS  read-only
    STATUS current
    DESCRIPTION
        "Indicates whether the switch is running as a querier in the VLAN.
         Based on the querier election, if elected as a querier, it will
         send  query messages. If the switch receives the query message with
         lower IP/MAC any other querier in the VLAN, It will move to non querier
         state. If a leave is received then querier moves to checking membership state."
    ::= { igmpCurQurCfgEntry 2}

igmpCurCfgQuerier OBJECT-TYPE
    SYNTAX  INTEGER { 
    enabled(1),
    disabled(2)
    }
    MAX-ACCESS  read-only
    STATUS current
    DESCRIPTION
       "The snooping switch can be configured to send IGMP queries.
        querier  are not present in the VLAN and it set to
        'enabled' the switch will generate general query messages.
        The query messages will be suppressed if the switch receives
        the query message from any other querier with lower IP/MAC in the VLAN."
    ::= { igmpCurQurCfgEntry 3}

igmpCurCfgQueryInterval OBJECT-TYPE
    SYNTAX  INTEGER(1..608)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "This is the interval (in seconds) for which the switch
         sends general queries when it is configured as a querier for
         the VLAN."
    ::= { igmpCurQurCfgEntry 4 }

igmpCurCfgQurSrcIp OBJECT-TYPE
    SYNTAX  IpAddress
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The source ip for GSQ proxy in this vlan. This Src Ip will be used in
         querier election mechanism. It will be the source address in queries sent bye
         the switch."
    ::= { igmpCurQurCfgEntry 5 }

igmpCurCfgElectionType OBJECT-TYPE
    SYNTAX  INTEGER { 
    ipv4(1),
    macaddr(2)
    }
    MAX-ACCESS  read-only
    STATUS current
    DESCRIPTION
        "The querier selection type specify the criteria to be used to elect
         querier for this VLAN. When a switch is configured as a querier,
         this will define the election criteria . e.g. MAC or source IP-address."
    ::= { igmpCurQurCfgEntry 6 }

igmpCurCfgQurRobustness OBJECT-TYPE
    SYNTAX  INTEGER(2..10)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The Robustness Variable allows tuning for the Other
         Querier Present Interval."
    ::= { igmpCurQurCfgEntry 7 }

igmpCurCfgQurStartupCnt OBJECT-TYPE
    SYNTAX  INTEGER(1..10)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Represents the number of Queries sent out on startup of
         querier election, separated by the Startup Query Interval."
    ::= { igmpCurQurCfgEntry 8 }

igmpCurCfgQurStartupInt OBJECT-TYPE
    SYNTAX  INTEGER(1..608)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "This variable represents the interval(in seconds) between General
          Queries sent by a Querier on startup. By default: 1/4 the Query Interval."
    ::= { igmpCurQurCfgEntry 9 }

igmpCurCfgQurMaxRespTime OBJECT-TYPE
    SYNTAX  INTEGER(1..256)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The maximum query response interval advertised in
          IGMP queries on this VLAN."
    ::= { igmpCurQurCfgEntry 10 }

igmpCurCfgOtherQurAddress OBJECT-TYPE  
   SYNTAX DisplayString (SIZE(0..128))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The  IP/MAC Address of the  Querier, which has won the Querier election,
    when bosSnoopVlanCfgQuerier is enabled on this vlan."
    ::= { igmpCurQurCfgEntry 11 }
 

igmpCurCfgOtherQurPresentInt OBJECT-TYPE  
   SYNTAX DisplayString (SIZE(0..128))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The Other Querier Present Interval is the length of time that must
    pass before switch decides that there is no longer another 
    multicast router which should be the querier.  This value
    is ((the Robustness Variable) times (the Query Interval)) plus
    (one half of one Query Response Interval)."
        ::= { igmpCurQurCfgEntry 12 }

igmpCurCfgVlanOperVersion OBJECT-TYPE
    SYNTAX  INTEGER { 
    igmpV1(1),
    igmpV2(2),
    igmpV3(3)
    }
    MAX-ACCESS  read-only
    STATUS current
    DESCRIPTION
        "Indicates the operating version of the IGMP snooping switch for
         a specific VLAN. The default operating mode on a specific VLAN
         is IGMP version 3 i.e, V3(3). The 'bosIgsVlanCfgOperVersion'
         should be configured on the basis of the version of the router
         present in the VLAN."
    ::= { igmpCurQurCfgEntry 13 }

igmpCurVlanOperVersion OBJECT-TYPE
    SYNTAX  INTEGER { 
    igmpV1(1),
    igmpV2(2),
    igmpV3(3)
    }
    MAX-ACCESS  read-only
    STATUS current
    DESCRIPTION
        "Indicates the operating version of the IGMP snooping switch for
         specific VLAN. The default operating mode on a specific VLAN
         IGMP version 3 i.e, V3(3)."
    ::= { igmpCurQurCfgEntry 14 }

igmpCurVlanOlderVerTimer OBJECT-TYPE  
    SYNTAX DisplayString (SIZE(0..128))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "Indicates the remaining time of lowest operating version of the vlan.
    For interoperability with multicast routers/switches/Hosts, running older 
    versions of IGMP, systems maintain a IGMP Version variable for each Vlan.
    In order to switch gracefully between versions of IGMP, hosts keep both an
    IGMPv1 Querier Present timer and an IGMPv2 Querier Present timer per Vlan.
    According to RFC 3376 this value is ((the Robustness Variable) times 
    (the Query Interval)) plus (one Query Response Interval)."
    ::= { igmpCurQurCfgEntry 15 }



igmpNewQurCfgTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF IgmpNewQurCfgEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table of IGMP querier configuration."
    ::= { igmpCfg 16 }

igmpNewQurCfgEntry OBJECT-TYPE
    SYNTAX  IgmpNewQurCfgEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A row in the IGMP querier configuration table"
    INDEX   { igmpNewQurCfgVlanIndex }
    ::= { igmpNewQurCfgTable 1 }


IgmpNewQurCfgEntry ::= SEQUENCE {
    igmpNewQurCfgVlanIndex             INTEGER,
    igmpNewQuerierState                INTEGER,
    igmpNewCfgQuerier                  INTEGER,
    igmpNewCfgQueryInterval            INTEGER,
    igmpNewCfgQurSrcIp                 IpAddress,
    igmpNewCfgElectionType             INTEGER,
    igmpNewCfgQurRobustness            INTEGER,
    igmpNewCfgQurStartupCnt            INTEGER,
    igmpNewCfgQurStartupInt            INTEGER,
    igmpNewCfgQurMaxRespTime           INTEGER,
    igmpNewCfgOtherQurAddress          DisplayString,
    igmpNewCfgOtherQurPresentInt       DisplayString,
    igmpNewCfgVlanOperVersion          INTEGER,
    igmpNewVlanOperVersion             INTEGER, 
    igmpNewVlanOlderVerTimer           DisplayString,
    igmpNewCfgQuerierDefault           INTEGER
    }

igmpNewQurCfgVlanIndex OBJECT-TYPE
    SYNTAX  INTEGER(1..4094)
    MAX-ACCESS  read-only
    STATUS current
    DESCRIPTION
        "The vlan number for which the IGMP querier information is related."
    ::= { igmpNewQurCfgEntry 1}

igmpNewQuerierState OBJECT-TYPE
    SYNTAX  INTEGER { 
    querier(1),
    nonQuerier(2),
    checkingMembership(3)
    }
    MAX-ACCESS  read-only
    STATUS current
    DESCRIPTION
        "Indicates whether the switch is running as a querier in the VLAN.
         Based on the querier election, if elected as a querier, it will
         send  query messages. If the switch receives the query message with
         lower IP/MAC any other querier in the VLAN, It will move to non querier
         state. If a leave is received then querier moves to checking membership state."
    ::= { igmpNewQurCfgEntry 2}

igmpNewCfgQuerier OBJECT-TYPE
    SYNTAX  INTEGER { 
    enabled(1),
    disabled(2)
    }
    MAX-ACCESS  read-write
    STATUS current
    DESCRIPTION
       "The snooping switch can be configured to send IGMP queries.
        querier  are not present in the VLAN and it set to
        'enabled' the switch will generate general query messages.
        The query messages will be suppressed if the switch receives
        the query message from any other querier with lower IP/MAC in the VLAN."
    ::= { igmpNewQurCfgEntry 3}

igmpNewCfgQueryInterval OBJECT-TYPE
    SYNTAX  INTEGER(1..608)
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "This is the interval (in seconds) for which the switch
         sends general queries when it is configured as a querier for
         the VLAN."
    ::= { igmpNewQurCfgEntry 4 }

igmpNewCfgQurSrcIp OBJECT-TYPE
    SYNTAX  IpAddress
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The source ip for GSQ proxy in this vlan. This Src Ip will be used in
         querier election mechanism. It will be the source address in queries sent bye
         the switch."
    ::= { igmpNewQurCfgEntry 5 }

igmpNewCfgElectionType OBJECT-TYPE
    SYNTAX  INTEGER { 
    ipv4(1),
    macaddr(2)
    }
    MAX-ACCESS  read-write
    STATUS current
    DESCRIPTION
        "The querier selection type specify the criteria to be used to elect
         querier for this VLAN. When a switch is configured as a querier,
         this will define the election criteria . e.g. MAC or source IP-address."
    ::= { igmpNewQurCfgEntry 6 }

igmpNewCfgQurRobustness OBJECT-TYPE
    SYNTAX  INTEGER(2..10)
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The Robustness Variable allows tuning for the Other
         Querier Present Interval."
    ::= { igmpNewQurCfgEntry 7 }

igmpNewCfgQurStartupCnt OBJECT-TYPE
    SYNTAX  INTEGER(1..10)
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Represents the number of Queries sent out on startup of
         querier election, separated by the Startup Query Interval."
    ::= { igmpNewQurCfgEntry 8 }

igmpNewCfgQurStartupInt OBJECT-TYPE
    SYNTAX  INTEGER(1..608)
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "This variable represents the interval(in seconds) between General
          Queries sent by a Querier on startup. By default: 1/4 the Query Interval."
    ::= { igmpNewQurCfgEntry 9 }

igmpNewCfgQurMaxRespTime OBJECT-TYPE
    SYNTAX  INTEGER(1..256)
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The maximum query response interval advertised in
          IGMP queries on this VLAN."
    ::= { igmpNewQurCfgEntry 10 }

igmpNewCfgOtherQurAddress OBJECT-TYPE  
   SYNTAX DisplayString (SIZE(0..128))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The  IP/MAC Address of the  Querier, which has won the Querier election,
    when bosSnoopVlanCfgQuerier is enabled on this vlan."
    ::= { igmpNewQurCfgEntry 11 }
 

igmpNewCfgOtherQurPresentInt OBJECT-TYPE  
   SYNTAX DisplayString (SIZE(0..128))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The Other Querier Present Interval is the length of time that must
    pass before switch decides that there is no longer another 
    multicast router which should be the querier.  This value
    is ((the Robustness Variable) times (the Query Interval)) plus
    (one half of one Query Response Interval)."
    ::= { igmpNewQurCfgEntry 12 }

igmpNewCfgVlanOperVersion OBJECT-TYPE
    SYNTAX  INTEGER { 
    igmpV1(1),
    igmpV2(2),
    igmpV3(3)
    }
    MAX-ACCESS  read-write
    STATUS current
    DESCRIPTION
        "Indicates the operating version of the IGMP snooping switch for
         a specific VLAN. The default operating mode on a specific VLAN
         is IGMP version 3 i.e, V3(3). The 'igmpNewCfgVlanOperVersion'
         should be configured on the basis of the version of the mrouter
         present in the VLAN."
    ::= { igmpNewQurCfgEntry 13 }

igmpNewVlanOperVersion OBJECT-TYPE
    SYNTAX  INTEGER { 
    igmpV1(1),
    igmpV2(2),
    igmpV3(3)
    }
    MAX-ACCESS  read-only
    STATUS current
    DESCRIPTION
        "Indicates the operating version of the IGMP snooping switch for
         specific VLAN. The default operating mode on a specific VLAN
         IGMP version 3 i.e, V3(3)."
    ::= { igmpNewQurCfgEntry 14 }

igmpNewVlanOlderVerTimer OBJECT-TYPE  
    SYNTAX DisplayString (SIZE(0..128))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "Indicates the remaining time of lowest operating version of the vlan.
    For interoperability with multicast routers/switches/Hosts, running older 
    versions of IGMP, systems maintain a IGMP Version variable for each Vlan.
    In order to switch gracefully between versions of IGMP, hosts keep both an
    IGMPv1 Querier Present timer and an IGMPv2 Querier Present timer per Vlan.
    According to RFC 3376 this value is ((the Robustness Variable) times 
    (the Query Interval)) plus (one Query Response Interval)."
    ::= { igmpNewQurCfgEntry 15 }

igmpNewCfgQuerierDefault OBJECT-TYPE
    SYNTAX INTEGER {
        other(1),
        default(2)
    }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
      "Action to set the default IGMP Querier settings on a Vlan.
       Returns other(1) when read."
    ::= { igmpNewQurCfgEntry 16 }

igmpCurCfgQuerierOnOff OBJECT-TYPE
    SYNTAX INTEGER { 
        on(1),
        off(2)
    }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The current status of IGMP Querier."
    ::= { igmpCfg 17}

igmpNewCfgQuerierOnOff OBJECT-TYPE
    SYNTAX INTEGER { 
        on(1),
        off(2)
    }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Globally turn IGMP Querier On/Off."
    ::= { igmpCfg 18}



--
-- IPMC Static Route Configuration
--
ipmcStaticRouteCfg  OBJECT IDENTIFIER ::= { layer3Configs 20 }

ipmcStaticRouteTableMaxSize OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The maximum number of rows in the IPMC Static Route table."
    ::= { ipmcStaticRouteCfg 1 }

ipmcCurCfgStaticRouteTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF IpmcCurCfgStaticRouteEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table of static IPMC routes in the current configuration block."
    ::= { ipmcStaticRouteCfg 2 }

ipmcCurCfgStaticRouteEntry OBJECT-TYPE
    SYNTAX  IpmcCurCfgStaticRouteEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A row in the static IPMC route table"
    INDEX   { ipmcCurCfgStaticRouteIndx }
    ::= { ipmcCurCfgStaticRouteTable 1 }

IpmcCurCfgStaticRouteEntry ::= SEQUENCE {
    ipmcCurCfgStaticRouteIndx             Integer32,
    ipmcCurCfgStaticRouteDestIp           IpAddress,
    ipmcCurCfgStaticRouteVlanId           Integer32,
    ipmcCurCfgStaticRouteHostBmap         OCTET STRING,
    ipmcCurCfgStaticRouteAdminkeys        DisplayString,
    ipmcCurCfgStaticRouteTrunks           OCTET STRING
    }

ipmcCurCfgStaticRouteIndx OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The index of the IPMC static routing table."
    ::= { ipmcCurCfgStaticRouteEntry 1}

ipmcCurCfgStaticRouteDestIp OBJECT-TYPE
    SYNTAX  IpAddress
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The destination IPMC address of this IPMC route."
    ::= { ipmcCurCfgStaticRouteEntry 2}

ipmcCurCfgStaticRouteVlanId OBJECT-TYPE 
    SYNTAX  Integer32
    MAX-ACCESS  read-only 
    STATUS  current 
    DESCRIPTION 
        "The vlan id of this route."
    ::= { ipmcCurCfgStaticRouteEntry 3}

ipmcCurCfgStaticRouteHostBmap OBJECT-TYPE 
    SYNTAX  OCTET STRING
    MAX-ACCESS  read-only 
    STATUS  current 
    DESCRIPTION 
        "The Host ports that are added to this IPMC port bitmap.
         The selected ports are presented in a bitmap format
         in receiving order:

             OCTET 1  OCTET 2  .....
             xxxxxxxx xxxxxxxx .....
             ||    || |_ Port 9
             ||    ||
             ||    ||___ Port 8
             ||    |____ Port 7
             ||      .    .   .
             ||_________ Port 2
             |__________ Port 1

             where x : 1 - The represented Host Port is added
                       0 - The represented Host Port is not added"

    ::= { ipmcCurCfgStaticRouteEntry 4}


ipmcCurCfgStaticRouteAdminkeys OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..128))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The LACP port adminkey of this route.
         Adminkeys on five positions alligned to right, separated by commas."
    ::= { ipmcCurCfgStaticRouteEntry 8}

ipmcCurCfgStaticRouteTrunks      OBJECT-TYPE
    SYNTAX  OCTET STRING
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The trunk list for this IPMC route. The trunks are presented in bitmap format.
         in receiving order:

              OCTET 1  OCTET 2  .....
             xxxxxxxx xxxxxxxx .....
             ||    || |_ trunk 8
             ||    ||
             ||    ||___ trunk 7
             ||    |____ trunk 6
             ||      .    .   .
             ||_________ trunk 1
             |__________ reserved

         where x : 1 - The represented trunk belongs to IPMC route
                   0 - The represented trunk does not belong to IPMC route"
    ::= { ipmcCurCfgStaticRouteEntry 9 }

ipmcNewCfgStaticRouteTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF IpmcNewCfgStaticRouteEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table of IPMC static routes in the new
         configuration block.
         When creating a new route, Destination IP
         and Vlan id must be set first.
         The actual change in configuration occurs
         on using PortInfo leaf."
    ::= { ipmcStaticRouteCfg 3 }

ipmcNewCfgStaticRouteEntry OBJECT-TYPE
    SYNTAX  IpmcNewCfgStaticRouteEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A row in the static IPMC route table"
    INDEX   { ipmcNewCfgStaticRouteIndx }
    ::= { ipmcNewCfgStaticRouteTable 1 }

IpmcNewCfgStaticRouteEntry ::= SEQUENCE {
    ipmcNewCfgStaticRouteIndx             Integer32,
    ipmcNewCfgStaticRouteDestIp           IpAddress,
    ipmcNewCfgStaticRouteVlanId           Integer32,
    ipmcNewCfgStaticRouteHostBmap         OCTET STRING,
    ipmcNewCfgStaticRouteAddPort             Integer32,
    ipmcNewCfgStaticRouteRemPort             Integer32,
    ipmcNewCfgStaticRouteTrunks           OCTET STRING,
    ipmcNewCfgStaticRouteAddTrunk         INTEGER,
    ipmcNewCfgStaticRouteRemTrunk         INTEGER,
    ipmcNewCfgStaticRouteAdminkeys        DisplayString,
    ipmcNewCfgStaticRouteAddAdminkey      INTEGER,
    ipmcNewCfgStaticRouteRemAdminkey      INTEGER,
    ipmcNewCfgStaticRouteDelete           INTEGER
    }

ipmcNewCfgStaticRouteIndx OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The index of the IPMC static routing table."
    ::= { ipmcNewCfgStaticRouteEntry 1}

ipmcNewCfgStaticRouteDestIp OBJECT-TYPE
    SYNTAX  IpAddress
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "The destination IPMC address of this route.
         It must be set along Vlan id before creating
         new route."
    ::= { ipmcNewCfgStaticRouteEntry 2}

ipmcNewCfgStaticRouteVlanId OBJECT-TYPE 
    SYNTAX  Integer32
    MAX-ACCESS  read-create 
    STATUS  current 
    DESCRIPTION 
        "The vlan id of this route.
         It must be set along Destination IP before
         creating new route."
    ::= { ipmcNewCfgStaticRouteEntry 3}

ipmcNewCfgStaticRouteHostBmap OBJECT-TYPE 
    SYNTAX  OCTET STRING
    MAX-ACCESS  read-only 
    STATUS  current 
    DESCRIPTION 
        "The Host ports that are added to this IPMC port bitmap.
         The selected ports are presented in a bitmap format
         in receiving order:

             OCTET 1  OCTET 2  .....
             xxxxxxxx xxxxxxxx .....
             ||    || |_ Port 9
             ||    ||
             ||    ||___ Port 8
             ||    |____ Port 7
             ||      .    .   .
             ||_________ Port 2
             |__________ Port 1

             where x : 1 - The represented Host Port is added
                       0 - The represented Host Port is not added"

    ::= { ipmcNewCfgStaticRouteEntry 4}


ipmcNewCfgStaticRouteAddPort OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "The port to be added to this IPMC route.
         When creating a new route, be sure to set Destination IP
         and Vlan Id before using this leaf."
    ::= { ipmcNewCfgStaticRouteEntry 7}

ipmcNewCfgStaticRouteRemPort OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "The port to be removed from this IPMC route.
         Not allowed to delete ports that are part of trunks."
    ::= { ipmcNewCfgStaticRouteEntry 17}

ipmcNewCfgStaticRouteTrunks      OBJECT-TYPE
    SYNTAX  OCTET STRING
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The trunk list for this IPMC route. The trunks are presented in bitmap format.
         in receiving order:

              OCTET 1  OCTET 2  .....
             xxxxxxxx xxxxxxxx .....
             ||    || |_ trunk 8
             ||    ||
             ||    ||___ trunk 7
             ||    |____ trunk 6
             ||      .    .   .
             ||_________ trunk 1
             |__________ reserved

         where x : 1 - The represented trunk belongs to ipmc
                   0 - The represented trunk does not belong to ipmc"
    ::= { ipmcNewCfgStaticRouteEntry 8 }

ipmcNewCfgStaticRouteAddTrunk OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "The trunk group number to be added to this IPMC route.
         A '0' value is returned when read.
         When creating a new route, be sure to set Destination IP
         and Vlan Id before using this leaf."
    ::= { ipmcNewCfgStaticRouteEntry 9 }

ipmcNewCfgStaticRouteRemTrunk OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "The trunk group number to be added to this IPMC route.
         A '0' value is returned when read.
         When creating a new route, be sure to set Destination IP
         and Vlan Id before using this leaf."
    ::= { ipmcNewCfgStaticRouteEntry 10 }

ipmcNewCfgStaticRouteAdminkeys OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..128))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The LACP port adminkeys list for to this IPMC route.
         Adminkeys on five positions alligned to right, separated by commas"
    ::= { ipmcNewCfgStaticRouteEntry 11 }

ipmcNewCfgStaticRouteAddAdminkey OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The LACP port adminkey to be added to this IPMC route.
         A '0' value is returned when read.
         When creating a new route, be sure to set Destination IP
         and Vlan Id before using this leaf."
    ::= { ipmcNewCfgStaticRouteEntry 12 }

ipmcNewCfgStaticRouteRemAdminkey OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The LACP port adminkey to be removed from this IPMC route.
         A '0' value is returned when read."
    ::= { ipmcNewCfgStaticRouteEntry 13 }



ipmcNewCfgStaticRouteDelete OBJECT-TYPE
    SYNTAX  INTEGER {
        delete(2),
        deletehost(3),
        no(0)
    }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Delete this route."
    ::= { ipmcNewCfgStaticRouteEntry 16}

ipmcStaticRouteClearAll OBJECT-TYPE
    SYNTAX INTEGER {
        ok(1),
        clear(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "When set to clear(2),clears all static IPMC routes. Otherwhise nothing
is done."
    ::= { ipmcStaticRouteCfg 4 }


--
-- Static ARP Configuration
--
ipStaticArpTableMaxSize OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The maximum number of rows in the Static ARP table."
    ::= { ipStaticArpCfg 1 }

ipCurCfgStaticArpTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF IpCurCfgStaticArpEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table of static ARPs in the current configuration block."
    ::= { ipStaticArpCfg 2 }

ipCurCfgStaticArpEntry OBJECT-TYPE
    SYNTAX  IpCurCfgStaticArpEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A row in the static ARP table"
    INDEX   { ipCurCfgStaticArpIndx }
    ::= { ipCurCfgStaticArpTable 1 }

IpCurCfgStaticArpEntry ::= SEQUENCE {
    ipCurCfgStaticArpIndx         Integer32,
    ipCurCfgStaticArpIp           IpAddress,
    ipCurCfgStaticArpMAC          DisplayString,
    ipCurCfgStaticArpVlan         Integer32,
    ipCurCfgStaticArpPort         PortNumber
    }

ipCurCfgStaticArpIndx OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The index of the static ARP table."
    ::= { ipCurCfgStaticArpEntry 1}

ipCurCfgStaticArpIp OBJECT-TYPE
    SYNTAX  IpAddress
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The IP address for the ARP entry."
    ::= { ipCurCfgStaticArpEntry 2}

ipCurCfgStaticArpMAC OBJECT-TYPE
    SYNTAX  DisplayString
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The MAC address for the ARP entry."
    ::= { ipCurCfgStaticArpEntry 3 }

ipCurCfgStaticArpVlan OBJECT-TYPE 
    SYNTAX  Integer32
    MAX-ACCESS  read-only 
    STATUS  current 
    DESCRIPTION 
        "The VLAN for the ARP entry."
    ::= { ipCurCfgStaticArpEntry 4}

ipCurCfgStaticArpPort OBJECT-TYPE 
    SYNTAX  PortNumber
    MAX-ACCESS  read-only 
    STATUS  current 
    DESCRIPTION 
        "The port for the ARP entry."
    ::= { ipCurCfgStaticArpEntry 5}

ipNewCfgStaticArpTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF IpNewCfgStaticArpEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table of static ARPs in the new configuration block."
    ::= { ipStaticArpCfg 3 }

ipNewCfgStaticArpEntry OBJECT-TYPE
    SYNTAX  IpNewCfgStaticArpEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A row in the static ARP table"
    INDEX   { ipNewCfgStaticArpIndx }
    ::= { ipNewCfgStaticArpTable 1 }

IpNewCfgStaticArpEntry ::= SEQUENCE {
    ipNewCfgStaticArpIndx         Integer32,
    ipNewCfgStaticArpIp           IpAddress,
    ipNewCfgStaticArpMAC          DisplayString,
    ipNewCfgStaticArpVlan         Integer32,
    ipNewCfgStaticArpPort         PortNumber,
    ipNewCfgStaticArpAction       INTEGER
    }

ipNewCfgStaticArpIndx OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The index of the static ARP table."
    ::= { ipNewCfgStaticArpEntry 1}

ipNewCfgStaticArpIp OBJECT-TYPE
    SYNTAX  IpAddress
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "The IP address for the ARP entry."
    ::= { ipNewCfgStaticArpEntry 2}

ipNewCfgStaticArpMAC OBJECT-TYPE
    SYNTAX  DisplayString
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "The MAC address for the ARP entry."
    ::= { ipNewCfgStaticArpEntry 3 }

ipNewCfgStaticArpVlan OBJECT-TYPE 
    SYNTAX  Integer32
    MAX-ACCESS  read-create 
    STATUS  current 
    DESCRIPTION 
        "The VLAN for the ARP entry."
    ::= { ipNewCfgStaticArpEntry 4}

ipNewCfgStaticArpPort OBJECT-TYPE 
    SYNTAX  PortNumber
    MAX-ACCESS  read-create 
    STATUS  current 
    DESCRIPTION 
        "The port for the ARP entry."
    ::= { ipNewCfgStaticArpEntry 5}

ipNewCfgStaticArpAction OBJECT-TYPE
    SYNTAX  INTEGER {
        other(1),
        delete(2)
       }  
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "When set to the value of 2 (delete), the entire row is deleted. 
         When read, other is returned. Setting the value to anything other 
         than 2(delete) has no effect on the state of the row."
    ::= { ipNewCfgStaticArpEntry 6 }

ipStaticArpClearAll OBJECT-TYPE
    SYNTAX INTEGER {
        ok(1),
        clear(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "When set to clear(2), clears all static ARP entries. Otherwise
         nothing is done."
    ::= { ipStaticArpCfg 4 }


--
-- Static NBR Configuration
--
ipStaticNbrTableMaxSize OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The maximum number of rows in the Static NBR Cache table."
    ::= { ipStaticNbrCfg 1 }

ipCurCfgStaticNbrTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF IpCurCfgStaticNbrEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table of static NBR Cache entries in the current configuration block."
    ::= { ipStaticNbrCfg 2 }

ipCurCfgStaticNbrEntry OBJECT-TYPE
    SYNTAX  IpCurCfgStaticNbrEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A row in the static NBR Cache table"
    INDEX   { ipCurCfgStaticNbrIndx }
    ::= { ipCurCfgStaticNbrTable 1 }

IpCurCfgStaticNbrEntry ::= SEQUENCE {
    ipCurCfgStaticNbrIndx         Integer32,
    ipCurCfgStaticNbrIp           DisplayString,
    ipCurCfgStaticNbrMAC          DisplayString,
    ipCurCfgStaticNbrVlan         Integer32,
    ipCurCfgStaticNbrPort         PortNumber
    }

ipCurCfgStaticNbrIndx OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The index of the static NBR Cache table."
    ::= { ipCurCfgStaticNbrEntry 1}

ipCurCfgStaticNbrIp OBJECT-TYPE
    SYNTAX  DisplayString 
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The IP address for the NBR Cache entry."
    ::= { ipCurCfgStaticNbrEntry 2}

ipCurCfgStaticNbrMAC OBJECT-TYPE
    SYNTAX  DisplayString
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The MAC address for the NBR Cache entry."
    ::= { ipCurCfgStaticNbrEntry 3 }

ipCurCfgStaticNbrVlan OBJECT-TYPE 
    SYNTAX  Integer32
    MAX-ACCESS  read-only 
    STATUS  current 
    DESCRIPTION 
        "The VLAN for the NBR Cache entry."
    ::= { ipCurCfgStaticNbrEntry 4}

ipCurCfgStaticNbrPort OBJECT-TYPE 
    SYNTAX  PortNumber
    MAX-ACCESS  read-only 
    STATUS  current 
    DESCRIPTION 
        "The port for the NBR Cache entry."
    ::= { ipCurCfgStaticNbrEntry 5}

ipNewCfgStaticNbrTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF IpNewCfgStaticNbrEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table of static NBR Cache entries in the new configuration block."
    ::= { ipStaticNbrCfg 3 }

ipNewCfgStaticNbrEntry OBJECT-TYPE
    SYNTAX  IpNewCfgStaticNbrEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A row in the static NBR Cache table"
    INDEX   { ipNewCfgStaticNbrIndx }
    ::= { ipNewCfgStaticNbrTable 1 }

IpNewCfgStaticNbrEntry ::= SEQUENCE {
    ipNewCfgStaticNbrIndx         Integer32,
    ipNewCfgStaticNbrIp           DisplayString,
    ipNewCfgStaticNbrMAC          DisplayString,
    ipNewCfgStaticNbrVlan         Integer32,
    ipNewCfgStaticNbrPort         PortNumber,
    ipNewCfgStaticNbrAction       INTEGER
    }

ipNewCfgStaticNbrIndx OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The index of the static NBR Cache table."
    ::= { ipNewCfgStaticNbrEntry 1}

ipNewCfgStaticNbrIp OBJECT-TYPE
    SYNTAX  DisplayString  (SIZE(0..40))
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "The IP address for the NBR Cache entry."
    ::= { ipNewCfgStaticNbrEntry 2}

ipNewCfgStaticNbrMAC OBJECT-TYPE
    SYNTAX  DisplayString
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "The MAC address for the NBR Cache entry."
    ::= { ipNewCfgStaticNbrEntry 3 }

ipNewCfgStaticNbrVlan OBJECT-TYPE 
    SYNTAX  Integer32
    MAX-ACCESS  read-create 
    STATUS  current 
    DESCRIPTION 
        "The VLAN for the NBR Cache entry."
    ::= { ipNewCfgStaticNbrEntry 4}

ipNewCfgStaticNbrPort OBJECT-TYPE 
    SYNTAX  PortNumber
    MAX-ACCESS  read-create 
    STATUS  current 
    DESCRIPTION 
        "The port for the NBR Cache entry."
    ::= { ipNewCfgStaticNbrEntry 5}

ipNewCfgStaticNbrAction OBJECT-TYPE
    SYNTAX  INTEGER {
        other(1),
        delete(2)
       }  
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "When set to the value of 2 (delete), the entire row is deleted. 
         When read, other is returned. Setting the value to anything other 
         than 2(delete) has no effect on the state of the row."
    ::= { ipNewCfgStaticNbrEntry 6 }

ipStaticNbrClearAll OBJECT-TYPE
    SYNTAX INTEGER {
        ok(1),
        clear(2)
        }       
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "When set to clear(2),clears all static NBR Cache entries. Otherwhise nothing is done."
    ::= { ipStaticNbrCfg 4 }

--
-- IP Static Route6 Configuration
--
ipStaticRoute6TableMaxSize OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The maximum number of rows in the Static Route6 table."
    ::= { ipStaticRoute6Cfg 1 }


ipCurCfgStaticRoute6Table OBJECT-TYPE
    SYNTAX  SEQUENCE OF IpCurCfgStaticRoute6Entry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table of static IP6 routes in the current configuration block."
    ::= { ipStaticRoute6Cfg 2 }

ipCurCfgStaticRoute6Entry OBJECT-TYPE
    SYNTAX  IpCurCfgStaticRoute6Entry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A row in the static IP6 route table"
    INDEX   { ipCurCfgStaticRoute6Indx }
    ::= { ipCurCfgStaticRoute6Table 1 }

IpCurCfgStaticRoute6Entry ::= SEQUENCE {
    ipCurCfgStaticRoute6Indx         Integer32,
    ipCurCfgStaticRoute6DestIp       DisplayString,
    ipCurCfgStaticRoute6Mask         INTEGER,
    ipCurCfgStaticRoute6Gateway      DisplayString,
    ipCurCfgStaticRoute6Interface    Integer32
    }

ipCurCfgStaticRoute6Indx OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The index of the static IP6 routing table."
    ::= { ipCurCfgStaticRoute6Entry 1}

ipCurCfgStaticRoute6DestIp OBJECT-TYPE
    SYNTAX  DisplayString
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The destination IP6 address of this route."
    ::= { ipCurCfgStaticRoute6Entry 2}

ipCurCfgStaticRoute6Mask OBJECT-TYPE 
    SYNTAX  INTEGER (0..128)
    MAX-ACCESS  read-only 
    STATUS  current 
    DESCRIPTION 
        "The destination IP6 prefix len of this route."
    ::= { ipCurCfgStaticRoute6Entry 3}

ipCurCfgStaticRoute6Gateway OBJECT-TYPE 
    SYNTAX  DisplayString
    MAX-ACCESS  read-only 
    STATUS  current 
    DESCRIPTION 
        "The IP6 address of the gateway for this route."
    ::= { ipCurCfgStaticRoute6Entry 4}

ipCurCfgStaticRoute6Interface OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only 
    STATUS  current 
    DESCRIPTION 
        "The IP6 interface of this route.  The IP6 address of the specified 
         interface shall be used as source IP when performs routing."
    ::= { ipCurCfgStaticRoute6Entry 5}

ipNewCfgStaticRoute6Table OBJECT-TYPE
    SYNTAX  SEQUENCE OF IpNewCfgStaticRoute6Entry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table of static IP6 routes in the new configuration block."
    ::= { ipStaticRoute6Cfg 3 }

ipStaticRoute6ClearAllByDestIp OBJECT-TYPE
    SYNTAX  DisplayString
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Clears all static IP6 routes with the specified destination IP6 address."
    ::= { ipStaticRoute6Cfg 4}

ipStaticRoute6ClearAllByGatewayIp OBJECT-TYPE
    SYNTAX  DisplayString
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Clears all static IP6 routes with the specified gateway IP address."
    ::= { ipStaticRoute6Cfg 5}

ipStaticRoute6ClearAllByInterface OBJECT-TYPE
    SYNTAX  INTEGER
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Clears all IP6 routes on the specified inteface number."
    ::= { ipStaticRoute6Cfg 6}

ipStaticRoute6ClearAll OBJECT-TYPE
    SYNTAX INTEGER {
    ok(1),
    clear(2)
    }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "When set to clear(2), clears all IP6 static routes. Otherwise
         nothing is done."
    ::= { ipStaticRoute6Cfg 7}

ipNewCfgStaticRoute6Entry OBJECT-TYPE
    SYNTAX  IpNewCfgStaticRoute6Entry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A row in the static IP6 route table"
    INDEX   { ipNewCfgStaticRoute6Indx }
    ::= { ipNewCfgStaticRoute6Table 1 }

IpNewCfgStaticRoute6Entry ::= SEQUENCE {
    ipNewCfgStaticRoute6Indx         Integer32,
    ipNewCfgStaticRoute6DestIp       DisplayString,
    ipNewCfgStaticRoute6Mask         INTEGER,
    ipNewCfgStaticRoute6Gateway      DisplayString,
    ipNewCfgStaticRoute6Action       INTEGER,
    ipNewCfgStaticRoute6Interface    Integer32
    }

ipNewCfgStaticRoute6Indx OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The index of the static IP6 routing table."
    ::= { ipNewCfgStaticRoute6Entry 1}

ipNewCfgStaticRoute6DestIp OBJECT-TYPE
    SYNTAX  DisplayString  (SIZE(0..40))
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "The destination IP6 address of this route.
         Address should be 16-byte hexadecimal colon notation.
         Valid IPv6 address should be in any of the following forms
           xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
           xxxx::xxxx:xxxx:xxxx:xxxx"
    ::= { ipNewCfgStaticRoute6Entry 2}

ipNewCfgStaticRoute6Mask OBJECT-TYPE 
    SYNTAX  INTEGER (0..128)
    MAX-ACCESS  read-create 
    STATUS  current 
    DESCRIPTION 
        "The prefix length of this route."
    ::= { ipNewCfgStaticRoute6Entry 3}

ipNewCfgStaticRoute6Gateway OBJECT-TYPE 
    SYNTAX  DisplayString  (SIZE(0..40))
    MAX-ACCESS  read-create 
    STATUS  current 
    DESCRIPTION 
        "The IP6 address of the gateway for this route.
         Address should be 16-byte hexadecimal colon notation.
         Valid IPv6 address should be in any of the following forms
           xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
           xxxx::xxxx:xxxx:xxxx:xxxx"
    ::= { ipNewCfgStaticRoute6Entry 4}

ipNewCfgStaticRoute6Action OBJECT-TYPE
    SYNTAX  INTEGER {
        other(1),
        delete(2)
       }  
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "Set the value '2' to delete the entire route entry. 
         Value 1 (other) is returned when read."
    ::= { ipNewCfgStaticRoute6Entry 5 }

ipNewCfgStaticRoute6Interface OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "The IP6 interface of this route.  The IP6 address of the specified
         interface shall be used as source IP when performs routing."
    ::= { ipNewCfgStaticRoute6Entry 6 }

--
-- IPv6 Default Gateway Configuration
--

ipGatewayIpv6TableMax OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The maximum number of rows in the IPv6 gateway table."
    ::= { ipGatewayIpv6Cfg 1 }

ipCurCfgGwIpv6Table OBJECT-TYPE
    SYNTAX  SEQUENCE OF IpCurCfgGwIpv6Entry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table of IPv6 gateways in the Current configuration Block."
    ::= { ipGatewayIpv6Cfg 2 }

ipCurCfgGwIpv6Entry OBJECT-TYPE
    SYNTAX  IpCurCfgGwIpv6Entry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A row in the Ipv6 gateway table"
    INDEX   { ipCurCfgGwIpv6Index }
    ::= { ipCurCfgGwIpv6Table 1 }

IpCurCfgGwIpv6Entry ::= SEQUENCE {
    ipCurCfgGwIpv6Index    Integer32,
    ipCurCfgGwIpv6Addr     DisplayString,
    ipCurCfgGwIpv6State    INTEGER
    }

ipCurCfgGwIpv6Index OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The IPv6 gateway number for which the information is related."
    ::= { ipCurCfgGwIpv6Entry 1}

ipCurCfgGwIpv6Addr OBJECT-TYPE
    SYNTAX   DisplayString (SIZE(0..40))
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The IPv6 address of the gateway. Address should be 4-byte
         hexadecimal colon notation.
         Valid IPv6 address should be in any of the following forms
           xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
           xxxx::xxxx:xxxx:xxxx:xxxx or 
        fe80:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx%interface"
    ::= { ipCurCfgGwIpv6Entry 2 }
    
ipCurCfgGwIpv6State OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(2),
        disabled(3)
        }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The state of the default IPv6 gateway."
    ::= { ipCurCfgGwIpv6Entry 3 }

ipNewCfgGwIpv6Table OBJECT-TYPE
    SYNTAX  SEQUENCE OF IpNewCfgGwIpv6Entry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table of IPv6 gateways in the new configuration block."
    ::= { ipGatewayIpv6Cfg 3 }

ipNewCfgGwIpv6Entry OBJECT-TYPE
    SYNTAX  IpNewCfgGwIpv6Entry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A row in the Ipv6 gateway table"
    INDEX   { ipNewCfgGwIpv6Index }
    ::= { ipNewCfgGwIpv6Table 1 }

IpNewCfgGwIpv6Entry ::= SEQUENCE {
    ipNewCfgGwIpv6Index    Integer32,
    ipNewCfgGwIpv6Addr     DisplayString,
    ipNewCfgGwIpv6State    INTEGER,
    ipNewCfgGwIpv6Delete   INTEGER
    }

ipNewCfgGwIpv6Index OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The IPv6 gateway number for which the information is related."
    ::= { ipNewCfgGwIpv6Entry 1}

ipNewCfgGwIpv6Addr OBJECT-TYPE
    SYNTAX   DisplayString (SIZE(0..40))
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "The IPv6 address of the gateway. Address should be 4-byte
         hexadecimal colon notation.
         Valid IPv6 address should be in any of the following forms
           xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
           xxxx::xxxx:xxxx:xxxx:xxxx"
    ::= { ipNewCfgGwIpv6Entry 2 }
    
ipNewCfgGwIpv6State OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(2),
        disabled(3)
        }
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "The state of the default IPv6 gateway."
    ::= { ipNewCfgGwIpv6Entry 3 }

ipNewCfgGwIpv6Delete  OBJECT-TYPE
    SYNTAX  INTEGER {
        other(1),
        delete(2)
       }
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "When set to the value of 2 (delete), the default gw is deleted.
         When read, other is returned. Setting the value to anything other
         than 2(delete) has no effect on the state of the default IPv6 gw."
    ::= { ipNewCfgGwIpv6Entry 4 }

--
-- Prefix policy table Configuration
--
pptTableMaxSize OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The maximum number of rows in the Prefix policy table."
    ::= { pptCfg 1 }

pptCurCfgTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF PPTCurCfgEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table of prefix policy table entries in the current configuration block."
    ::= { pptCfg 2 }

pptCurCfgEntry OBJECT-TYPE
    SYNTAX  PPTCurCfgEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A row in the prefix policy table"
    INDEX   { pptCurCfgIndx }
    ::= { pptCurCfgTable 1 }

PPTCurCfgEntry ::= SEQUENCE {
    pptCurCfgIndx         Integer32,
    pptCurCfgPrefix       DisplayString,
    pptCurCfgPrefixLen    Integer32,
    pptCurCfgPrecedence   Integer32,
    pptCurCfgLabel        Integer32
    }

pptCurCfgIndx OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The index of the prefix policy table."
    ::= { pptCurCfgEntry 1}

pptCurCfgPrefix OBJECT-TYPE
    SYNTAX  DisplayString 
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The prefix address for the prefix policy table entry."
    ::= { pptCurCfgEntry 2}

pptCurCfgPrefixLen OBJECT-TYPE 
    SYNTAX  Integer32
    MAX-ACCESS  read-only 
    STATUS  current 
    DESCRIPTION 
        "The prefix length for the prefix policy table entry."
    ::= { pptCurCfgEntry 3}

pptCurCfgPrecedence OBJECT-TYPE 
    SYNTAX  Integer32
    MAX-ACCESS  read-only 
    STATUS  current 
    DESCRIPTION 
        "The precedence for the prefix policy table entry."
    ::= { pptCurCfgEntry 4}

pptCurCfgLabel OBJECT-TYPE 
    SYNTAX  Integer32
    MAX-ACCESS  read-only 
    STATUS  current 
    DESCRIPTION 
        "The label for the prefix policy table entry."
    ::= { pptCurCfgEntry 5}

pptNewCfgTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF PPTNewCfgEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The table of prefix policy table entries in the new configuration block."
    ::= { pptCfg 3 }

pptNewCfgEntry OBJECT-TYPE
    SYNTAX  PPTNewCfgEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A row in the prefix policy table"
    INDEX   { pptNewCfgIndx }
    ::= { pptNewCfgTable 1 }

PPTNewCfgEntry ::= SEQUENCE {
    pptNewCfgIndx         Integer32,
    pptNewCfgPrefix       DisplayString,
    pptNewCfgPrefixLen    Integer32,
    pptNewCfgPrecedence   Integer32,
    pptNewCfgLabel        Integer32,
    pptNewCfgAction       INTEGER
    }

pptNewCfgIndx OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The index of the prefix policy table."
    ::= { pptNewCfgEntry 1}

pptNewCfgPrefix OBJECT-TYPE
    SYNTAX  DisplayString  (SIZE(0..40))
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "The prefix address for the prefix policy table entry."
    ::= { pptNewCfgEntry 2}

pptNewCfgPrefixLen OBJECT-TYPE 
    SYNTAX  Integer32
    MAX-ACCESS  read-create 
    STATUS  current 
    DESCRIPTION 
        "The prefix length the prefix policy table entry."
    ::= { pptNewCfgEntry 3}

pptNewCfgPrecedence OBJECT-TYPE 
    SYNTAX  Integer32
    MAX-ACCESS  read-create 
    STATUS  current 
    DESCRIPTION 
        "The precedence for the prefix policy table entry."
    ::= { pptNewCfgEntry 4}

pptNewCfgLabel OBJECT-TYPE 
    SYNTAX  Integer32
    MAX-ACCESS  read-create 
    STATUS  current 
    DESCRIPTION 
        "The label for the prefix policy table entry."
    ::= { pptNewCfgEntry 5}

pptNewCfgAction OBJECT-TYPE
    SYNTAX  INTEGER {
        other(1),
        delete(2)
       }  
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "When set to the value of 2 (delete), the entire row is deleted. 
         When read, other is returned. Setting the value to anything other 
         than 2(delete) has no effect on the state of the row."
    ::= { pptNewCfgEntry 6 }


mldCurCfgState OBJECT-TYPE
    SYNTAX INTEGER {
        on(1),
        off(2)
      }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION    "MLD global state."
    ::= { mldCfg 1 }

mldNewCfgState OBJECT-TYPE
    SYNTAX INTEGER {
        on(1),
        off(2)
      }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION    "MLD global state."
    ::= { mldCfg 2 }
    
mldCurInterfaceTable OBJECT-TYPE
    SYNTAX SEQUENCE OF MldCurInterfaceEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "The (conceptual) table listing the interfaces on which
         MLD is enabled."
    ::= { mldCfg 3 }
 
mldCurInterfaceEntry OBJECT-TYPE
    SYNTAX     MldCurInterfaceEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
      "An entry (conceptual row) representing an interface on
         which MLD is enabled."
    INDEX      { mldCurInterfaceIfIndex }
    ::= { mldCurInterfaceTable 1 }

MldCurInterfaceEntry ::= SEQUENCE {
    mldCurInterfaceIfIndex                  Integer32,
    mldCurInterfaceQueryInterval            INTEGER,
    mldCurInterfaceVersion                  INTEGER,
    mldCurInterfaceQueryMaxResponseIntvl    INTEGER,
    mldCurInterfaceRobustness               INTEGER,
    mldCurInterfaceLastListenQueryIntvl  	INTEGER,
    mldCurInterfaceDMrtrEna                 INTEGER,
    mldCurInterfaceState                    INTEGER
}

mldCurInterfaceIfIndex OBJECT-TYPE
    SYNTAX     Integer32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
      "The internetwork-layer interface value of the interface
       for which MLD is enabled."
    ::= { mldCurInterfaceEntry 1 }
       
mldCurInterfaceQueryInterval OBJECT-TYPE
    SYNTAX     INTEGER
    UNITS      "seconds"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
      "The frequency at which MLD Host-Query packets are
       transmitted on this interface."
    DEFVAL     { 125 }
    ::= { mldCurInterfaceEntry 2 }

mldCurInterfaceVersion OBJECT-TYPE
    SYNTAX     INTEGER {
	mldv1(1),
	mldv2(2)
    }
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
      "The version of MLD which is running on this interface.
       This object is a place holder to allow for new versions
       of MLD to be introduced.  Version 1 of MLD is defined
       in RFC 2710."
    DEFVAL     { 1 }
    ::= { mldCurInterfaceEntry 3 }

mldCurInterfaceQueryMaxResponseIntvl OBJECT-TYPE
    SYNTAX     INTEGER
    UNITS      "seconds"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
      "The maximum query response time advertised in MLD
       queries on this interface."
    DEFVAL     { 1000 }
    ::= { mldCurInterfaceEntry 4 }

mldCurInterfaceRobustness OBJECT-TYPE
    SYNTAX     INTEGER
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
      "The Robustness Variable allows tuning for the expected
       packet loss on a subnet.  If a subnet is expected to be
       lossy, the Robustness Variable may be increased.  MLD is
       robust to (Robustness Variable-1) packet losses.  The
       discussion of the Robustness Variable is in Section 7.1
       of RFC 2710."
    DEFVAL     { 2 }
    ::= { mldCurInterfaceEntry 5 }

mldCurInterfaceLastListenQueryIntvl OBJECT-TYPE
    SYNTAX     INTEGER
    UNITS      "seconds"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
      "The Last Member Query Interval is the Max Response
       Delay inserted into Group-Specific Queries sent in
       response to Leave Group messages, and is also the amount
       of time between Group-Specific Query messages.  This
       value may be tuned to modify the leave latency of the
       network.  A reduced value results in reduced time to
       detect the loss of the last member of a group."
    DEFVAL     { 1 }
    ::= { mldCurInterfaceEntry 6 }

mldCurInterfaceDMrtrEna OBJECT-TYPE
    SYNTAX     INTEGER {
	disabled(0),
	enabled(1)
    }
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
      "Dynamic MRouter learning."
    DEFVAL	{ 0 }
    ::= { mldCurInterfaceEntry 7 }

mldCurInterfaceState OBJECT-TYPE
    SYNTAX     INTEGER {
	disabled(0),
	enabled(1)
    }
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
      "State of the MLD interface."
    DEFVAL	{ 0 }
    ::= { mldCurInterfaceEntry 8 }

mldNewInterfaceTable OBJECT-TYPE
    SYNTAX SEQUENCE OF MldNewInterfaceEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "The (conceptual) table listing the interfaces on which
      MLD is enabled."
    ::= { mldCfg 4 }
 
mldNewInterfaceEntry OBJECT-TYPE
    SYNTAX     MldNewInterfaceEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
      "An entry (conceptual row) representing an interface on
         which MLD is enabled."
    INDEX      { mldNewInterfaceIfIndex }
    ::= { mldNewInterfaceTable 1 }

MldNewInterfaceEntry::= SEQUENCE {
    mldNewInterfaceIfIndex                  Integer32,
    mldNewInterfaceQueryInterval            INTEGER,
    mldNewInterfaceVersion                  INTEGER,
    mldNewInterfaceQueryMaxResponseIntvl    INTEGER,
    mldNewInterfaceRobustness               INTEGER,
    mldNewInterfaceLastListenQueryIntvl  	INTEGER,
    mldNewInterfaceDMrtrEna                 INTEGER,
    mldNewInterfaceState                    INTEGER,
    mldNewInterfaceDefault                  INTEGER
}

mldNewInterfaceIfIndex OBJECT-TYPE
    SYNTAX     Integer32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
      "The internetwork-layer interface value of the interface
       for which MLD is enabled."
    ::= { mldNewInterfaceEntry 1 }
       
mldNewInterfaceQueryInterval OBJECT-TYPE
    SYNTAX     INTEGER(2..65535)
    UNITS      "seconds"
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
      "The frequency at which MLD Host-Query packets are
       transmitted on this interface."
    DEFVAL     { 125 }
    ::= { mldNewInterfaceEntry 2 }

mldNewInterfaceVersion OBJECT-TYPE
    SYNTAX     INTEGER {
	mldv1(1),
	mldv2(2)
    }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
      "The version of MLD which is running on this interface.
       This object is a place holder to allow for new versions
       of MLD to be introduced.  Version 1 of MLD is defined
       in RFC 2710."
    DEFVAL     { 1 }
    ::= { mldNewInterfaceEntry 3 }

mldNewInterfaceQueryMaxResponseIntvl OBJECT-TYPE
    SYNTAX     INTEGER(1000..65535)
    UNITS      "seconds"
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
      "The maximum query response time advertised in MLD
       queries on this interface."
    DEFVAL     { 1000 }
    ::= { mldNewInterfaceEntry 4 }

mldNewInterfaceRobustness OBJECT-TYPE
    SYNTAX     INTEGER(2..10)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
      "The Robustness Variable allows tuning for the expected
       packet loss on a subnet.  If a subnet is expected to be
       lossy, the Robustness Variable may be increased.  MLD is
       robust to (Robustness Variable-1) packet losses.  The
       discussion of the Robustness Variable is in Section 7.1
       of RFC 2710."
    DEFVAL     { 2 }
    ::= { mldNewInterfaceEntry 5 }

mldNewInterfaceLastListenQueryIntvl OBJECT-TYPE
    SYNTAX     INTEGER(1..32)
    UNITS      "seconds"
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
      "The Last Member Query Interval is the Max Response
       Delay inserted into Group-Specific Queries sent in
       response to Leave Group messages, and is also the amount
       of time between Group-Specific Query messages.  This
       value may be tuned to modify the leave latency of the
       network.  A reduced value results in reduced time to
       detect the loss of the last member of a group."
    DEFVAL     { 1 }
    ::= { mldNewInterfaceEntry 6 }

mldNewInterfaceDMrtrEna OBJECT-TYPE
    SYNTAX     INTEGER {
        disabled(0),
        enabled(1)
    }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
      "Dynamic MRouter learning."
    DEFVAL	{ 0 }
    ::= { mldNewInterfaceEntry 7 }

mldNewInterfaceState OBJECT-TYPE
    SYNTAX     INTEGER {
        disabled(0),
        enabled(1)
    }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
      "State of the MLD interface."
    DEFVAL	{ 0 }
    ::= { mldNewInterfaceEntry 8 }

mldNewInterfaceDefault OBJECT-TYPE
    SYNTAX     INTEGER {
        other(1),
        default(2)
    }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
      "Action to set the MLD interface configuration to default.
       Returns other(1) when read."
    ::= { mldNewInterfaceEntry 9 }

mldDefaultCfgState OBJECT-TYPE
    SYNTAX INTEGER {
        other(1),
        default(2)
      }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION    "Action to set the global MLD configuration to default.
                    Returns other(1) when read."
    ::= { mldCfg 5 }
                                                                                

--
-- Neighbor Discovery Prefix Configuration
--
ndprefixTableMaxSize OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The maximum number of rows in the NDPrefix table."
    ::= { ndprefixCfg 1 }

ndprefixCurCfgTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF NDPREFIXCurCfgEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The ndprefix table entries in the current configuration block."
    ::= { ndprefixCfg 2 }

ndprefixCurCfgEntry OBJECT-TYPE
    SYNTAX  NDPREFIXCurCfgEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A row in the ndprefix table."
    INDEX   { ndprefixCurCfgIndx }
    ::= { ndprefixCurCfgTable 1 }

NDPREFIXCurCfgEntry ::= SEQUENCE {
    ndprefixCurCfgIndx                  INTEGER,
    ndprefixCurCfgPrefix                DisplayString,
    ndprefixCurCfgPrefixLen             INTEGER,
    ndprefixCurCfgInterfaceIndex        Integer32,
    ndprefixCurCfgProfileIndex          INTEGER,
    ndprefixCurCfgValidLifetime         Gauge32,
    ndprefixCurCfgValidLifetimeFlag     INTEGER,
    ndprefixCurCfgPreferredLifetime     Gauge32,
    ndprefixCurCfgPreferredLifetimeFlag INTEGER,
    ndprefixCurCfgOnlinkFlag            INTEGER,
    ndprefixCurCfgAutonomousFlag        INTEGER,
    ndprefixCurCfgState                 INTEGER
    }

ndprefixCurCfgIndx OBJECT-TYPE
    SYNTAX  INTEGER (1..128)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The index of the ndprefix table."
    ::= { ndprefixCurCfgEntry 1}

ndprefixCurCfgPrefix OBJECT-TYPE
    SYNTAX  DisplayString 
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The prefix address for the prefix table entry."
    ::= { ndprefixCurCfgEntry 2}

ndprefixCurCfgPrefixLen OBJECT-TYPE 
    SYNTAX  INTEGER (0..128)
    MAX-ACCESS  read-only 
    STATUS  current 
    DESCRIPTION 
        "The prefix length for the prefix table entry."
    ::= { ndprefixCurCfgEntry 3}

ndprefixCurCfgInterfaceIndex OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The interface index for the prefix table entry."
    ::= { ndprefixCurCfgEntry 4}

ndprefixCurCfgProfileIndex OBJECT-TYPE
    SYNTAX  INTEGER (0..127)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The profile index for the prefix table entry
         Profile 0 is the default profile."
    ::= { ndprefixCurCfgEntry 5}

ndprefixCurCfgValidLifetime OBJECT-TYPE
    SYNTAX  Gauge32 (0..4294967295)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The Valid lifetime for the prefix table entry."
    ::= { ndprefixCurCfgEntry 6}

ndprefixCurCfgValidLifetimeFlag OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
    }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The Valid lifetime fixed flag for the prefix table entry."
    ::= { ndprefixCurCfgEntry 7}

ndprefixCurCfgPreferredLifetime OBJECT-TYPE
    SYNTAX  Gauge32 (0..4294967295)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The Preferred Lifetime for the prefix table entry."
    ::= { ndprefixCurCfgEntry 8}

ndprefixCurCfgPreferredLifetimeFlag OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
    }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The Preferred Lifetime fixed flag for the prefix table entry."
    ::= { ndprefixCurCfgEntry 9}

ndprefixCurCfgOnlinkFlag OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
    }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The Onlink flag for the prefix table entry."
    ::= { ndprefixCurCfgEntry 10}

ndprefixCurCfgAutonomousFlag OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
    }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The Autonomous flag for the prefix table entry."
    ::= { ndprefixCurCfgEntry 11}

ndprefixCurCfgState OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
    }
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The state for the prefix table entry."
    ::= { ndprefixCurCfgEntry 12}

ndprefixNewCfgTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF NDPREFIXNewCfgEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The ndprefix table entries in the new configuration block."
    ::= { ndprefixCfg 3 }

ndprefixNewCfgEntry OBJECT-TYPE
    SYNTAX  NDPREFIXNewCfgEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A row in the prefix table"
    INDEX   { ndprefixNewCfgIndx }
    ::= { ndprefixNewCfgTable 1 }

NDPREFIXNewCfgEntry ::= SEQUENCE {
    ndprefixNewCfgIndx                  Integer32,
    ndprefixNewCfgPrefix                DisplayString,
    ndprefixNewCfgPrefixLen             INTEGER,
    ndprefixNewCfgInterfaceIndex        Integer32,
    ndprefixNewCfgProfileIndex          INTEGER,
    ndprefixNewCfgValidLifetime         Gauge32,
    ndprefixNewCfgValidLifetimeFlag     INTEGER,
    ndprefixNewCfgPreferredLifetime     Gauge32,
    ndprefixNewCfgPreferredLifetimeFlag INTEGER,
    ndprefixNewCfgOnlinkFlag            INTEGER,
    ndprefixNewCfgAutonomousFlag        INTEGER,
    ndprefixNewCfgState                 INTEGER,
    ndprefixNewCfgAction                INTEGER
    }

ndprefixNewCfgIndx OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The index of the prefix table."
    ::= { ndprefixNewCfgEntry 1}

ndprefixNewCfgPrefix OBJECT-TYPE
    SYNTAX  DisplayString
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "The prefix address for the prefix table entry."
    ::= { ndprefixNewCfgEntry 2}

ndprefixNewCfgPrefixLen OBJECT-TYPE
    SYNTAX  INTEGER (0..128)
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "The prefix length for the prefix table entry."
    ::= { ndprefixNewCfgEntry 3}

ndprefixNewCfgInterfaceIndex OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "The interface index for the prefix table entry."
    ::= { ndprefixNewCfgEntry 4}

ndprefixNewCfgProfileIndex OBJECT-TYPE
    SYNTAX  INTEGER (0..127)
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "The profile index for the prefix table entry.
         Profile 0 is the default profile."
    ::= { ndprefixNewCfgEntry 5}

ndprefixNewCfgValidLifetime OBJECT-TYPE
    SYNTAX  Gauge32 (0..4294967295)
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "The Valid lifetime for the prefix table entry."
    ::= { ndprefixNewCfgEntry 6}

ndprefixNewCfgValidLifetimeFlag OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
    }
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "The Valid lifetime fixed flag for the prefix table entry."
    ::= { ndprefixNewCfgEntry 7}

ndprefixNewCfgPreferredLifetime OBJECT-TYPE
    SYNTAX  Gauge32 (0..4294967295)
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "The Preferred Lifetime for the prefix table entry."
    ::= { ndprefixNewCfgEntry 8}

ndprefixNewCfgPreferredLifetimeFlag OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
    }
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "The Preferred Lifetime fixed flag for the prefix table entry."
    ::= { ndprefixNewCfgEntry 9}

ndprefixNewCfgOnlinkFlag OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
    }
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "The Onlink flag for the prefix table entry."
    ::= { ndprefixNewCfgEntry 10}

ndprefixNewCfgAutonomousFlag OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
    }
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "The Autonomous flag for the prefix table entry."
    ::= { ndprefixNewCfgEntry 11}

ndprefixNewCfgState OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
    }
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "The state for the prefix table entry."
    ::= { ndprefixNewCfgEntry 12}

ndprefixNewCfgAction OBJECT-TYPE
    SYNTAX  INTEGER {
        other(1),
        delete(2),
        deleteall(3)
    }  
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "When set to the value of 2 (delete), the entire row is deleted. 
         When set to the value of 3 (deleteall), all entries are deleted.
         When read, other is returned. Setting the value to anything other 
         than 2(delete) or 3(deleteall) has no effect on the state of the row."
    ::= { ndprefixNewCfgEntry 13}



-- Statistics


-- RIPv2 Statistics

ripStatInPackets OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of RIP packets received."
    ::= { rip2Stats 1 }

ripStatOutPackets OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of RIP packets transmitted."
    ::= { rip2Stats 2 }

ripStatInRequestPkts OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of RIP requests received."
    ::= { rip2Stats 3 }

ripStatInResponsePkts OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of RIP response received."
    ::= { rip2Stats 4 }

ripStatOutRequestPkts OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of RIP requests transmitted."
    ::= { rip2Stats 5 }

ripStatOutResponsePkts OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of RIP responses transmitted."
    ::= { rip2Stats 6 }

ripStatRouteTimeout OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of RIP route timeouts."
    ::= { rip2Stats 7 }

ripStatInBadSizePkts OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of bad size RIP packets received."
    ::= { rip2Stats 8 }

ripStatInBadVersion OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of RIP bad versions received."
    ::= { rip2Stats 9 }

ripStatInBadZeros OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of RIP bad zeros received."
    ::= { rip2Stats 10 }

ripStatInBadSourcePort OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of RIP bad source port received."
    ::= { rip2Stats 11 }

ripStatInBadSourceIP OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of RIP bad source IP received."
    ::= { rip2Stats 12 }

ripStatInSelfRcvPkts OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of RIP packets from self received."
    ::= { rip2Stats 13 }




-- IP statistics

ipStatsInReceives OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "ip InReceive"
    ::= { ipStats 1 }

ipStatsInHdrErrors OBJECT-TYPE
    SYNTAX          Counter32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "ip InHdrError"
    ::= { ipStats 2 }

ipStatsInAddrErrors OBJECT-TYPE
    SYNTAX          Counter32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "ip InAddrErrors"
    ::= { ipStats 3 }



ipStatsInUnknownProtos OBJECT-TYPE
    SYNTAX          Counter32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "ip InUnknownProtos"
    ::= { ipStats 5 }

ipStatsInDiscards OBJECT-TYPE
    SYNTAX          Counter32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "ip InDiscards"
    ::= { ipStats 6 }

ipStatsInDelivers OBJECT-TYPE
    SYNTAX          Counter32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "ip InDelivers"
    ::= { ipStats 7 }

ipStatsOutRequests OBJECT-TYPE
    SYNTAX          Counter32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "ip OutRequests"
    ::= { ipStats 8 }

ipStatsOutDiscards OBJECT-TYPE
    SYNTAX          Counter32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "ip OutDiscards"
    ::= { ipStats 9 }


ipStatsDefaultTTL OBJECT-TYPE
    SYNTAX          Counter32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "ip DefaultTTL"
    ::= { ipStats 19 }


--SNMP statistics

nsnmpInPkts OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "snmpInPkts"
    ::= { snmpStats 1 }

nsnmpInBadCommunityNames OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "snmpInBadCommunityNames"
    ::= { snmpStats 2 }

nsnmpInASNParseErrs OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "snmpInASNParseErrs"
    ::= { snmpStats 3 }

nsnmpOutPkts OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "snmpOutPkts"
    ::= { snmpStats 4 }

nsnmpInTooBigs OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "snmpInTooBigs"
    ::= { snmpStats 5 }

nsnmpInBadValues OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "snmpInBadValues"
    ::= { snmpStats 6 }

nsnmpInGenErrs OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "snmpInGenErrs"
    ::= { snmpStats 7 }

nsnmpInTotalSetVars OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "snmpInTotalSetVars"
    ::= { snmpStats 8 }

nsnmpInGetNexts OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "snmpInGetNexts"
    ::= { snmpStats 9 }

nsnmpInGetResponses OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "snmpInGetResponses"
    ::= { snmpStats 10 }

nsnmpOutTooBigs OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "snmpOutTooBigs"
    ::= { snmpStats 11 }

nsnmpOutBadValues OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "snmpOutBadValues"
    ::= { snmpStats 12 }

nsnmpOutGenErrs OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "snmpOutGenErrs"
    ::= { snmpStats 13 }

nsnmpOutGetNexts OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "snmpOutGetNexts"
    ::= { snmpStats 14 }

nsnmpOutGetResponses OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "snmpOutGetResponses"
    ::= { snmpStats 15 }

nsnmpSilentDrops OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "snmpSilentDrops"
    ::= { snmpStats 16 }

nsnmpInBadVersions OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "snmpInBadVersions"
    ::= { snmpStats 17 }

nsnmpInBadCommunityUses OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "snmpInBadCommunityUses"
    ::= { snmpStats 18 }

nsnmpEnableAuthTraps OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "snmpEnableAuthTraps"
    ::= { snmpStats 19 }

nsnmpInBadTypes OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "snmpInBadTypes"
    ::= { snmpStats 20 }

nsnmpInNoSuchNames OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "snmpInNoSuchNames"
    ::= { snmpStats 21 }

nsnmpInReadOnlys OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "snmpInReadOnlys"
    ::= { snmpStats 22 }

nsnmpInTotalReqVars OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "snmpInTotalReqVars"
    ::= { snmpStats 23 }

nsnmpInGetRequests OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "snmpInGetRequests"
    ::= { snmpStats 24 }

nsnmpInSetRequests OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "snmpInSetRequests"
    ::= { snmpStats 25 }

nsnmpInTraps OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "snmpInTraps"
    ::= { snmpStats 26 }

nsnmpOutNoSuchNames OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "snmpOutNoSuchNames"
    ::= { snmpStats 27 }

nsnmpOutReadOnlys OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "snmpOutReadOnlys"
    ::= { snmpStats 28 }

nsnmpOutGetRequests OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "snmpOutGetRequests"
    ::= { snmpStats 29 }

nsnmpOutSetRequests OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "snmpOutSetRequests"
    ::= { snmpStats 30 }

nsnmpOutTraps OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "snmpOutTraps"
    ::= { snmpStats 31 }

nsnmpProxyDrops OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "snmpProxyDrops"
    ::= { snmpStats 32 }


-- ICMP statistics

icmpStatsInMsgs OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "icmp InMsgs"
    ::= { icmpStats 1 }

icmpStatsInErrors OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "icmp InErrors"
    ::= { icmpStats 2 }

icmpStatsInDestUnreachs OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "icmp InDestUnreachs"
    ::= { icmpStats 3 }

icmpStatsInTimeExcds OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "icmp InTimeExcds"
    ::= { icmpStats 4 }

icmpStatsInParmProbs OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "icmp InParmProbs"
    ::= { icmpStats 5 }

icmpStatsInSrcQuenchs OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "icmp InSrcQuenchs"
    ::= { icmpStats 6 }

icmpStatsInRedirects OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "icmp InRedirects"
    ::= { icmpStats 7 }

icmpStatsInEchos OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "icmp InEchos"
    ::= { icmpStats 8 }

icmpStatsInEchoReps OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "icmp InEchoReps"
    ::= { icmpStats 9 }

icmpStatsInTimestamps OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "icmp InTimestamps"
    ::= { icmpStats 10 }

icmpStatsInTimestampReps OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "icmp InTimestampReps"
    ::= { icmpStats 11 }

icmpStatsInAddrMasks OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "icmp InAddrMasks"
    ::= { icmpStats 12 }

icmpStatsInAddrMaskReps OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "icmp InAddrMaskReps"
    ::= { icmpStats 13 }

icmpStatsOutMsgs OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "icmp OutMsgs"
    ::= { icmpStats 14 }

icmpStatsOutErrors OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "icmp OutErrors"
    ::= { icmpStats 15 }

icmpStatsOutDestUnreachs OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "icmp OutDestUnreachs"
    ::= { icmpStats 16 }

icmpStatsOutTimeExcds OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "icmp OutTimeExcds"
    ::= { icmpStats 17 }

icmpStatsOutParmProbs OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "icmp OutParmProbs"
    ::= { icmpStats 18 }

icmpStatsOutSrcQuenchs OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "icmp OutSrcQuenchs"
    ::= { icmpStats 19 }

icmpStatsOutRedirects OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "icmp OutRedirects"
    ::= { icmpStats 20 }

icmpStatsOutEchos OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "icmp OutEchos"
    ::= { icmpStats 21 }

icmpStatsOutEchoReps OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "icmp OutEchoReps"
    ::= { icmpStats 22 }

icmpStatsOutTimestamps OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "icmp OutTimestamps"
    ::= { icmpStats 23 }

icmpStatsOutTimestampReps OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "icmp OutTimestampReps"
    ::= { icmpStats 24 }

icmpStatsOutAddrMasks OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "icmp OutAddrMasks"
    ::= { icmpStats 25 }

icmpStatsOutAddrMaskReps OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "icmp OutAddrMaskReps"
    ::= { icmpStats 26 }

-- TCP statistics

tcpStatsRtoAlgorithm OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "tcp RtoAlgorithm"
    ::= { tcpStats 1 }

tcpStatsRtoMin OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "tcp RtoMin"
    ::= { tcpStats 2 }

tcpStatsRtoMax OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "tcp RtoMax"
    ::= { tcpStats 3 }

tcpStatsMaxConn OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "tcp MaxConn"
    ::= { tcpStats 4 }

tcpStatsActiveOpens OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "tcp ActiveOpens"
    ::= { tcpStats 5 }

tcpStatsPassiveOpens OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "tcp PassiveOpens"
    ::= { tcpStats 6 }

tcpStatsAttemptFails OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "tcp AttemptFails"
    ::= { tcpStats 7 }

tcpStatsEstabResets OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "tcp EstabResets"
    ::= { tcpStats 8 }

tcpStatsInSegs OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "tcp InSegs"
    ::= { tcpStats 9 }

tcpStatsOutSegs OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "tcp OutSegs"
    ::= { tcpStats 10 }

tcpStatsRetransSegs OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "tcp RetransSegs"
    ::= { tcpStats 11 }

tcpStatsInErrs OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "tcp InErrs"
    ::= { tcpStats 12 }

tcpStatsCurrEstab OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "tcp CurrEstab"
    ::= { tcpStats 13 }

tcpStatsCurrConn OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "tcp CurrConn"
    ::= { tcpStats 14 }

tcpStatsOutRsts OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "tcp OutRsts"
    ::= { tcpStats 15 }

-- UDP statistics

udpStatsInDatagrams OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "udp InDatagrams"
    ::= { udpStats 1 }

udpStatsOutDatagrams OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "udp OutDatagrams"
    ::= { udpStats 2 }

udpStatsInErrors OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "udp InErrors"
    ::= { udpStats 3 }

udpStatsNoPorts OBJECT-TYPE
    SYNTAX         Counter32
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "udp NoPorts"
    ::= { udpStats 4 }


-- BOOTP statistics

bootpRelayStatsTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF BootpRelayStatsTableEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The BOOTP relay agent statistics."
    ::= { bootpStats 1 }

bootpRelayStatsTableEntry  OBJECT-TYPE
    SYNTAX      BootpRelayStatsTableEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A row in the BOOTP relay agent statistics table."
    INDEX  { bootpRelayStatsIndex }
    ::= { bootpRelayStatsTable 1 }

BootpRelayStatsTableEntry ::= SEQUENCE {
    bootpRelayStatsIndex                    PortNumber,
    bootpRelayStatsRequestsReceived         Counter32,
    bootpRelayStatsRequestsRelayed          Counter32,
    bootpRelayStatsRequestsDroppedNoRelay   Counter32,
    bootpRelayStatsRequestsDroppedNoServer  Counter32,
    bootpRelayStatsRequestsDroppedError     Counter32,
    bootpRelayStatsRepliesReceived          Counter32,
    bootpRelayStatsRepliesRelayed           Counter32,
    bootpRelayStatsRepliesDroppedError      Counter32
    }

bootpRelayStatsIndex  OBJECT-TYPE
    SYNTAX      PortNumber
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The port number of the port associated with this BOOTP relay
         statistics entry."
    ::= { bootpRelayStatsTableEntry 1 }

bootpRelayStatsRequestsReceived  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of BOOTP request packets received on the port."
    ::= { bootpRelayStatsTableEntry 2 }

bootpRelayStatsRequestsRelayed  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of request packets relayed to the BOOTP server. If
         there is more than one server, a request is relayed once for
         each server; hence, with two servers, this counter will be twice
         as many as the value of the bootpRelayStatsRequestsReceived
         object."
    ::= { bootpRelayStatsTableEntry 3 }


bootpRelayStatsRequestsDroppedNoRelay  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This counter increases each time a request could not be relayed
         because BOOTP relay is disabled or not allowed on the port."
    ::= { bootpRelayStatsTableEntry 5 }

bootpRelayStatsRequestsDroppedNoServer  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This counter increases each time a request is dropped because
         there is no configured server or the server is unreachable
         because there is no active IP interface that can be used for
         relaying the request to the server."
    ::= { bootpRelayStatsTableEntry 6 }

bootpRelayStatsRequestsDroppedError  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This counter increases each time a request is dropped due to
         various errors encountered while processing the request packet.
         Such errors include short packet length, invalid 'hops' value,
         and memory allocation errors."
    ::= { bootpRelayStatsTableEntry 7 }

bootpRelayStatsRepliesReceived  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This is the total number of BOOTP response packets received on
         the port associated with this object."
    ::= { bootpRelayStatsTableEntry 8 }

bootpRelayStatsRepliesRelayed  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This is the total number of response packets that were relayed
         to the client."
    ::= { bootpRelayStatsTableEntry 9 }

bootpRelayStatsRepliesDroppedError  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This counter increases each time a response packet is dropped
         due to various errors encountered while processing the packet.
         Errors include unknown relay agent addresses ('giaddr'), and
         memory allocation errors."
    ::= { bootpRelayStatsTableEntry 10 }


-- ARP Statistics Group

arpStatEntries OBJECT-TYPE
    SYNTAX  Gauge32 
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The current number of ARP entries."
    ::= { arpStats 1 }

arpStatHighWater OBJECT-TYPE
    SYNTAX  Gauge32 
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The highest number of ARP entries."
    ::= { arpStats 2 }

arpStatMaxEntries OBJECT-TYPE
    SYNTAX  Gauge32 
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The maximum number of ARP entries."
    ::= { arpStats 3 }


-- ROUTE Statistics Group

routeStatEntries OBJECT-TYPE
    SYNTAX  Gauge32 
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The current number of IP routes."
    ::= { routeStats 1 }

routeStatHighWater OBJECT-TYPE
    SYNTAX  Gauge32 
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The highest number of IP routes."
    ::= { routeStats 2 }

routeStatStaticEntries OBJECT-TYPE
    SYNTAX  Gauge32 
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Current static routes."
    ::= { routeStats 3 }

routeStatRipEntries OBJECT-TYPE
    SYNTAX  Gauge32 
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Current RIP routes."
    ::= { routeStats 4 }

routeStatOspfEntries OBJECT-TYPE
    SYNTAX  Gauge32 
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Current OSPF routes."
    ::= { routeStats 5 }

routeStatBgpEntries OBJECT-TYPE
    SYNTAX  Gauge32 
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Current BGP routes."
    ::= { routeStats 6 }

routeStatMaxEntries OBJECT-TYPE
    SYNTAX  Gauge32 
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The maximum number of IP routes."
    ::= { routeStats 7 }

routeStatEcmpMaxEntries OBJECT-TYPE
    SYNTAX  Gauge32 
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Maximum number of ECMP routes."
    ::= { routeStats 8 }

routeStatEcmpMaxStaticEntries OBJECT-TYPE
    SYNTAX  Gauge32 
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Maximum number of static ECMP routes."
    ::= { routeStats 9 }

routeStatEcmpMaxDynamicEntries OBJECT-TYPE
    SYNTAX  Gauge32 
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Maximum number of dynamic ECMP routes."
    ::= { routeStats 10 }

routeStatEcmpPathsEntries OBJECT-TYPE
    SYNTAX  Gauge32 
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Number of routes with ECMP paths."
    ::= { routeStats 11 }

-- DNS Statistics

dnsStatInGoodDnsRequests OBJECT-TYPE 
    SYNTAX  Counter32 
    MAX-ACCESS  read-only
    STATUS  current 
    DESCRIPTION 
        "The total number of DNS request packets which are received."
    ::= { dnsStats 1 }

dnsStatInBadDnsRequests OBJECT-TYPE 
    SYNTAX  Counter32 
    MAX-ACCESS  read-only
    STATUS  current 
    DESCRIPTION 
        "The total number of DNS request packets received that were dropped."
    ::= { dnsStats 2 }

dnsStatOutDnsRequests OBJECT-TYPE 
    SYNTAX  Counter32 
    MAX-ACCESS  read-only
    STATUS  current 
    DESCRIPTION 
        "The total number of DNS request packets that have been transmitted."
    ::= { dnsStats 3 }

-- The VRRP Statistics

vrrpStatInAdvers OBJECT-TYPE 
    SYNTAX  Counter32 
    MAX-ACCESS  read-only
    STATUS  current 
    DESCRIPTION 
        "The number of good VRRP advertisements which are received."
    ::= { vrrpStats 1 }

vrrpStatOutAdvers OBJECT-TYPE 
    SYNTAX  Counter32 
    MAX-ACCESS  read-only
    STATUS  current 
    DESCRIPTION 
        "The number of good VRRP advertisements which are transmitted."
    ::= { vrrpStats 2 }

vrrpStatBadAdvers OBJECT-TYPE 
    SYNTAX  Counter32 
    MAX-ACCESS  read-only
    STATUS  current 
    DESCRIPTION 
        "The number of bad VRRP advertisements which are received."
    ::= { vrrpStats 3 }

vrrpStatBadVersion OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The number of bad VRRP version adv which are received."
    ::= { vrrpStats 4 }

vrrpStatBadAddress OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The number of bad VRRP addres adv which are received."
    ::= { vrrpStats 5 }

vrrpStatBadPassword OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The number of bad VRRP advertisements which are received."
    ::= { vrrpStats 6 }

vrrpStatBadVrid OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The number of bad VRRP version ID adv which are received."
    ::= { vrrpStats 7 }

vrrpStatBadData OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The number of bad VRRP advertisements which are received."
    ::= { vrrpStats 8 }

vrrpStatBadInterval OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The number of bad VRRP intervals which are received."
    ::= { vrrpStats 9 }

vrrpStatOutGratuitousARPs OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The number of gratuitous ARP packets which are transmitted."
    ::= { vrrpStats 10 }


-- Clear Statistics  for ip and ip interface
ipClearStats OBJECT-TYPE
    SYNTAX  INTEGER { 
    ok(1),
    clear(2)
    }
    MAX-ACCESS  read-write
    STATUS  current  
    DESCRIPTION
        "Setting this to clear(2) results in clearing the IP statistics." 
    ::= { clearStats 1 }

vrrpClearStats OBJECT-TYPE 
    SYNTAX  INTEGER {
        ok(1),
        clear(2)
        }
    MAX-ACCESS  read-write
    STATUS  current 
    DESCRIPTION 
        "Setting this to clear(2) results in clearing the VRRP statistics."
    ::= { clearStats 2 }


ospfClearStats OBJECT-TYPE
    SYNTAX  INTEGER {
        clear(1),
        ok(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Setting this to clear(1) results in clearing the OSPF statistics."
    ::= { clearStats 4 }

tcpClearStats OBJECT-TYPE
    SYNTAX  INTEGER {
        clear(1),
        ok(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Setting this to clear(1) results in clearing the TCP statistics."
    ::= { clearStats 5 }

udpClearStats OBJECT-TYPE
    SYNTAX  INTEGER {
        clear(1),
        ok(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Setting this to clear(1) results in clearing the UDP statistics."
    ::= { clearStats 6 }

dnsClearStats OBJECT-TYPE
    SYNTAX  INTEGER {
        clear(1),
        ok(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Setting this to clear(1) results in clearing the DNS statistics."
    ::= { clearStats 7 }

arpClearStats OBJECT-TYPE
    SYNTAX  INTEGER {
        clear(1),
        ok(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Setting this to clear(1) results in clearing the ARP statistics."
    ::= { clearStats 8 }

icmpClearStats OBJECT-TYPE
    SYNTAX  INTEGER {
        clear(1),
        ok(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Setting this to clear(1) results in clearing the ICMP statistics."
    ::= { clearStats 9 }

routeClearStats OBJECT-TYPE
    SYNTAX  INTEGER {
        clear(1),
        ok(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Setting this to clear(1) results in clearing the Route statistics."
    ::= { clearStats 10 }

ipv6ClearStats OBJECT-TYPE
    SYNTAX  INTEGER {
        clear(1),
        ok(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Setting this to clear(1) results in clearing the IPv6 statistics."
    ::= { clearStats 13 }

ipv6ClearIcmpStats OBJECT-TYPE
    SYNTAX  INTEGER {
        clear(1),
        ok(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Setting this to clear(1) results in clearing the ICMP6 statistics."
    ::= { clearStats 14 }

ipv6ClearUdpStats OBJECT-TYPE
    SYNTAX  INTEGER {
        clear(1),
        ok(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Setting this to clear(1) results in clearing the UDP6 statistics."
    ::= { clearStats 15 }
ospf3ClearStats OBJECT-TYPE
    SYNTAX  INTEGER {
        clear(1),
        ok(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Setting this to clear(1) results in clearing the ospf3 statistics."
    ::= { clearStats 16 }
ripClearStats OBJECT-TYPE
    SYNTAX  INTEGER {
        clear(1),
        ok(2)
        }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "Setting this to clear(1) results in clearing the RIP statistics."
    ::= { clearStats 17 }

-- Ospf Statistics 

-- Ospf Statistics for all interfaces and OSPF areas 
ospfGeneralStats       OBJECT IDENTIFIER ::= { ospfStats  1 }
ospfCumRxTxStats       OBJECT IDENTIFIER ::= { ospfGeneralStats  1 }
ospfCumNbrChangeStats  OBJECT IDENTIFIER ::= { ospfGeneralStats  2 }
ospfCumIntfChangeStats OBJECT IDENTIFIER ::= { ospfGeneralStats  3 }
ospfTimersKickOffStats OBJECT IDENTIFIER ::= { ospfGeneralStats  4 }

-- Ospf Statistics / Area
ospfArea           OBJECT IDENTIFIER ::= { ospfStats  2 }

ospfAreaRxTxStats OBJECT-TYPE
    SYNTAX SEQUENCE OF OspfAreaRxTxStatsEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "The table of OSPF Area Rx/Tx Statistics."
    ::= { ospfArea 1 }

ospfAreaRxTxStatsEntry OBJECT-TYPE
    SYNTAX OspfAreaRxTxStatsEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "Rx Tx packet Statistics about a OSPF area."
    INDEX { ospfAreaRxTxIndex }
    ::= { ospfAreaRxTxStats 1 }
 
OspfAreaRxTxStatsEntry ::= SEQUENCE {
    ospfAreaRxTxIndex          Integer32,
    ospfAreaRxPkts             Counter32,
    ospfAreaTxPkts             Counter32,
    ospfAreaRxHello            Counter32,
    ospfAreaTxHello            Counter32,
    ospfAreaRxDatabase         Counter32,
    ospfAreaTxDatabase         Counter32,
    ospfAreaRxlsReqs           Counter32,
    ospfAreaTxlsReqs           Counter32,
    ospfAreaRxlsAcks           Counter32,
    ospfAreaTxlsAcks           Counter32,
    ospfAreaRxlsUpdates        Counter32,
    ospfAreaTxlsUpdates        Counter32
    }

ospfAreaRxTxIndex OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The index of the ospf Area for which these statistics apply."
    ::= { ospfAreaRxTxStatsEntry 1 }

ospfAreaRxPkts OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of OSPF packets received in this OSPF area."
    ::= { ospfAreaRxTxStatsEntry 2 }
 
ospfAreaTxPkts OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of OSPF packets transmitted in this OSPF area."
    ::= { ospfAreaRxTxStatsEntry 3 }
 
ospfAreaRxHello OBJECT-TYPE
    SYNTAX  Counter32 
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of Hello packets received in this OSPF area."
    ::= { ospfAreaRxTxStatsEntry 4 }

ospfAreaTxHello OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of Hello packets transmitted in this OSPF
         area."
    ::= { ospfAreaRxTxStatsEntry 5 }
 
ospfAreaRxDatabase OBJECT-TYPE
    SYNTAX  Counter32 
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of Database Description packets transmitted 
         for this OSPF area."
    ::= { ospfAreaRxTxStatsEntry 6 }

ospfAreaTxDatabase OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of Database Description packets transmitted 
         for this OSPF area."
    ::= { ospfAreaRxTxStatsEntry 7 }
 
ospfAreaRxlsReqs OBJECT-TYPE
    SYNTAX  Counter32 
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of Link State Request packets received for 
         this OSPF area."
    ::= { ospfAreaRxTxStatsEntry 8 }

ospfAreaTxlsReqs OBJECT-TYPE
    SYNTAX  Counter32 
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of Link State Request packets transmitted for 
         this OSPF area."
    ::= { ospfAreaRxTxStatsEntry 9 }

ospfAreaRxlsAcks OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of Link State Acknowledgement packets received for 
         this OSPF area."
    ::= { ospfAreaRxTxStatsEntry 10 }
 
ospfAreaTxlsAcks OBJECT-TYPE
    SYNTAX  Counter32 
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of Link State Acknowledgement packets transmitted
         for this OSPF area."
    ::= { ospfAreaRxTxStatsEntry 11 }

ospfAreaRxlsUpdates OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of Link State Update packets received for 
         this OSPF area."
    ::= { ospfAreaRxTxStatsEntry 12 }
 
ospfAreaTxlsUpdates OBJECT-TYPE
    SYNTAX  Counter32 
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of Link State Update packets transmitted for 
         this OSPF area."
    ::= { ospfAreaRxTxStatsEntry 13 }


ospfAreaNbrChangeStats OBJECT-TYPE
    SYNTAX SEQUENCE OF OspfAreaNbrChangeStatsEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "The table of OSPF Area Neighbour Statistics."
    ::= { ospfArea 2 }

ospfAreaNbrChangeStatsEntry OBJECT-TYPE
    SYNTAX OspfAreaNbrChangeStatsEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "Area Neighbour Change Statistics about a OSPF area."
    INDEX { ospfAreaNbrIndex }
    ::= { ospfAreaNbrChangeStats 1 }
 
OspfAreaNbrChangeStatsEntry ::= SEQUENCE {
    ospfAreaNbrIndex            Integer32,
    ospfAreaNbrhello            Counter32,
    ospfAreaNbrStart            Counter32,
    ospfAreaNbrAdjointOk        Counter32,
    ospfAreaNbrNegotiationDone  Counter32,
    ospfAreaNbrExchangeDone     Counter32,
    ospfAreaNbrBadRequests      Counter32,
    ospfAreaNbrBadSequence      Counter32,
    ospfAreaNbrLoadingDone      Counter32,
    ospfAreaNbrN1way            Counter32,
    ospfAreaNbrRstAd            Counter32,
    ospfAreaNbrDown         Counter32,
    ospfAreaNbrN2way            Counter32
    }

ospfAreaNbrIndex OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The index of the ospf Area for which these statistics apply."
    ::= { ospfAreaNbrChangeStatsEntry 1 }

ospfAreaNbrhello OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of Hello packets received from neighbours
         in this OSPF area."
    ::= { ospfAreaNbrChangeStatsEntry 2 }

ospfAreaNbrStart OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of neighbours in this state (i.e. an indication
         that  Hello packets should now be sent to the neighbour at intervals
         of HelloInterval seconds.) in this OSPF area."
    ::= { ospfAreaNbrChangeStatsEntry 3 }

ospfAreaNbrAdjointOk OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of decisions to be made (again) as to whether
         an adjacency should be established/maintained with the neighbour.
         for this OSPF area."
    ::= { ospfAreaNbrChangeStatsEntry 4 }

ospfAreaNbrNegotiationDone OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of neighbours in this state wherein the 
         Master/slave relationship has been negotiated, and sequence
         numbers have been exchanged, for this OSPF area."
    ::= { ospfAreaNbrChangeStatsEntry 5 }

ospfAreaNbrExchangeDone OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of neighbours in this state (i.e. in an
         adjacency's final state) having transimitted a full sequence 
         of Database Description packets, for this OSPF area."
    ::= { ospfAreaNbrChangeStatsEntry 6 }

ospfAreaNbrBadRequests OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The sum total number of Link State Requests which have been received
         for a link state advertisement not contained in the database across
         this OSPF area."
    ::= { ospfAreaNbrChangeStatsEntry 7 }

ospfAreaNbrBadSequence OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of Database Description packets which have been
         received that either 
         a) has an unexpected DD sequence number
         b) Unexpectedly has the init bit set
         c) Has an options field differing from the last Options field
            received in a Database Description packet.
         Any of these conditions indicate that some error has occured during
         adjacency establishment for this OSPF area."
    ::= { ospfAreaNbrChangeStatsEntry 8 }

ospfAreaNbrLoadingDone OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of link state updates received for all 
         out-of-date portions of the database in this OSPF area."
    ::= { ospfAreaNbrChangeStatsEntry 9 }

ospfAreaNbrN1way OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of Hello packets received from neighbours, in
         which this router is not mentioned in this OSPF area."
    ::= { ospfAreaNbrChangeStatsEntry 10 }

ospfAreaNbrRstAd OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of times the Neighbour adjacency has been reset
         across this OPSF area."
    ::= { ospfAreaNbrChangeStatsEntry 11 }

ospfAreaNbrDown OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of Neighbouring routers down (i.e. in the initial
         state of a neighbour conversation.) in this OSPF area."
    ::= { ospfAreaNbrChangeStatsEntry 12 }

ospfAreaNbrN2way OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of Hello packets received from neighbours, in
         which this router is mentioned in this OSPF area."
    ::= { ospfAreaNbrChangeStatsEntry 13 }

ospfAreaChangeStats OBJECT-TYPE
    SYNTAX SEQUENCE OF OspfAreaChangeStatsEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "The table of OSPF Area Change Statistics."
    ::= { ospfArea 3 }

ospfAreaChangeStatsEntry OBJECT-TYPE
    SYNTAX OspfAreaChangeStatsEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "Area  Change Statistics about a OSPF area."
    INDEX { ospfAreaIntfIndex }
    ::= { ospfAreaChangeStats 1 }
 
OspfAreaChangeStatsEntry ::= SEQUENCE {
    ospfAreaIntfIndex       Integer32,
    ospfAreaIntfHello           Counter32,
    ospfAreaIntfDown            Counter32,
    ospfAreaIntfLoop        Counter32,
    ospfAreaIntfUnloop      Counter32,
    ospfAreaIntfWaitTimer       Counter32,
    ospfAreaIntfBackup          Counter32,
    ospfAreaIntfNbrChange       Counter32
    }

ospfAreaIntfIndex OBJECT-TYPE
    SYNTAX    Integer32
    MAX-ACCESS    read-only
    STATUS    current
    DESCRIPTION
        "The index of the OSPF Area for which these statistics apply."
    ::= { ospfAreaChangeStatsEntry 1 }

ospfAreaIntfHello OBJECT-TYPE
    SYNTAX    Counter32
    MAX-ACCESS    read-only
    STATUS    current
    DESCRIPTION
        "The total number of Hello packets sent on this OSPF area."
    ::= { ospfAreaChangeStatsEntry 2 }

ospfAreaIntfDown OBJECT-TYPE
    SYNTAX   Counter32
    MAX-ACCESS   read-only
    STATUS   current
    DESCRIPTION
        "The total number of interfaces down in this OSPF area."
    ::= { ospfAreaChangeStatsEntry 3 }

ospfAreaIntfLoop OBJECT-TYPE
    SYNTAX    Counter32
    MAX-ACCESS    read-only
    STATUS    current
    DESCRIPTION
        "The total number of interfaces no longer connected to 
         the attatched network in this OSPF area."
    ::= { ospfAreaChangeStatsEntry 4 }

ospfAreaIntfUnloop OBJECT-TYPE
    SYNTAX   Counter32
    MAX-ACCESS   read-only
    STATUS   current
    DESCRIPTION
        "The total number of interfaces connected to the attatched
     network in this OSPF area.."
    ::= { ospfAreaChangeStatsEntry 5 }


ospfAreaIntfWaitTimer OBJECT-TYPE
    SYNTAX        Counter32
    MAX-ACCESS        read-only
    STATUS        current
    DESCRIPTION
        "The total number of times the Wait Timer has been fired,
         (indicating the end of the waiting period that is required
          before electing a (Backup) Designated Router) for this 
          OSPF area."
    ::= { ospfAreaChangeStatsEntry 6 }

ospfAreaIntfBackup OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS     read-only
    STATUS     current
    DESCRIPTION
        "The total number of Backup Designated Routers on the attatched
         network for this OSPF area."
    ::= { ospfAreaChangeStatsEntry 7 }


ospfAreaIntfNbrChange OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS     read-only
    STATUS     current
    DESCRIPTION
        "The total number of changes in the set of bidirectional neighbours
         associated with the interface in this OSPF area."
    ::= { ospfAreaChangeStatsEntry 8 }

ospfAreaErrorStats OBJECT-TYPE
    SYNTAX SEQUENCE OF OspfAreaErrorStatsEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "The table of OSPF Area Error Statistics."
    ::= { ospfArea 4 }

ospfAreaErrorStatsEntry OBJECT-TYPE
    SYNTAX OspfAreaErrorStatsEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "Error Statistics for an OSPF area."
    INDEX { ospfAreaErrIndex }
    ::= { ospfAreaErrorStats 1 }
 
OspfAreaErrorStatsEntry ::= SEQUENCE {
    ospfAreaErrIndex        Integer32,
    ospfAreaErrAuthFailure      Counter32,
    ospfAreaErrNetmaskMismatch  Counter32,
    ospfAreaErrHelloMismatch    Counter32,
    ospfAreaErrDeadMismatch     Counter32,
    ospfAreaErrOptionsMismatch  Counter32,
    ospfAreaErrUnknownNbr       Counter32,
    ospfAreaErrAreaMismatch     Counter32,
    ospfAreaErrInvalidSelfOrigLsa Counter32
    }

ospfAreaErrIndex OBJECT-TYPE
    SYNTAX    Integer32
    MAX-ACCESS    read-only
    STATUS    current
    DESCRIPTION
        "The index of the OSPF Area for which these statistics apply."
    ::= { ospfAreaErrorStatsEntry 1 }

ospfAreaErrAuthFailure OBJECT-TYPE
    SYNTAX    Counter32
    MAX-ACCESS    read-only
    STATUS    current
    DESCRIPTION
        "The total number of packets received with a wrong password in 
         this area."
    ::= { ospfAreaErrorStatsEntry 2 }

ospfAreaErrNetmaskMismatch OBJECT-TYPE
    SYNTAX    Counter32
    MAX-ACCESS    read-only
    STATUS    current
    DESCRIPTION
        "The total number of packets received with a wrong netmask in 
         this area."
    ::= { ospfAreaErrorStatsEntry 3 }

ospfAreaErrHelloMismatch OBJECT-TYPE
    SYNTAX    Counter32
    MAX-ACCESS    read-only
    STATUS    current
    DESCRIPTION
        "The total number of packets received with a different hello interval
         in this area."
    ::= { ospfAreaErrorStatsEntry 4 }

ospfAreaErrDeadMismatch OBJECT-TYPE
    SYNTAX    Counter32
    MAX-ACCESS    read-only
    STATUS    current
    DESCRIPTION
        "The total number of packets received with a different dead interval
         in this area."
    ::= { ospfAreaErrorStatsEntry 5 }

ospfAreaErrOptionsMismatch OBJECT-TYPE
    SYNTAX    Counter32
    MAX-ACCESS    read-only
    STATUS    current
    DESCRIPTION
        "The total number of packets received with a different options
         in this area."
    ::= { ospfAreaErrorStatsEntry 6 }

ospfAreaErrUnknownNbr OBJECT-TYPE
    SYNTAX    Counter32
    MAX-ACCESS    read-only
    STATUS    current
    DESCRIPTION
        "The total number of packets received from an unknown neighbor
         in this area."
    ::= { ospfAreaErrorStatsEntry 7 }

ospfAreaErrAreaMismatch OBJECT-TYPE
    SYNTAX    Counter32
    MAX-ACCESS    read-only
    STATUS    current
    DESCRIPTION
        "The total number of packets received with a wrong  area."
    ::= { ospfAreaErrorStatsEntry 8 }

ospfAreaErrInvalidSelfOrigLsa OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS     read-only
    STATUS     current
    DESCRIPTION
        "The total number of packets received with invalid self
         originated LSAs."
    ::= { ospfAreaErrorStatsEntry 9 }

-- Ospf Statistics / Interface
ospfInterface          OBJECT IDENTIFIER ::= { ospfStats  3 }

ospfIntfRxTxStats OBJECT-TYPE
    SYNTAX SEQUENCE OF OspfIntfRxTxStatsEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "The table of OSPF Interface Rx/Tx packet Statistics."
    ::= { ospfInterface 1 }

ospfIntfRxTxStatsEntry OBJECT-TYPE
    SYNTAX OspfIntfRxTxStatsEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "OSPF interface Rx/Tx packet statistics."
    INDEX { ospfIntfRxTxIndex }
    ::= { ospfIntfRxTxStats 1 }

OspfIntfRxTxStatsEntry ::= SEQUENCE {
    ospfIntfRxTxIndex          Integer32,
    ospfIntfRxPkts             Counter32,
    ospfIntfTxPkts             Counter32,
    ospfIntfRxHello            Counter32,
    ospfIntfTxHello            Counter32,
    ospfIntfRxDatabase         Counter32,
    ospfIntfTxDatabase         Counter32,
    ospfIntfRxlsReqs           Counter32,
    ospfIntfTxlsReqs           Counter32,
    ospfIntfRxlsAcks           Counter32,
    ospfIntfTxlsAcks           Counter32,
    ospfIntfRxlsUpdates        Counter32,
    ospfIntfTxlsUpdates        Counter32
    }

ospfIntfRxTxIndex OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The OSPF interface for which these statistics apply."
    ::= { ospfIntfRxTxStatsEntry 1 }

ospfIntfRxPkts OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of OSPF packets received for this OSPF interface."
    ::= { ospfIntfRxTxStatsEntry 2 }
 
ospfIntfTxPkts OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of OSPF packets transmitted for this OSPF interface."
    ::= { ospfIntfRxTxStatsEntry 3 }
 
ospfIntfRxHello OBJECT-TYPE
    SYNTAX  Counter32 
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of Hello packets received 
         for this OSPF interface."
    ::= { ospfIntfRxTxStatsEntry 4 }

ospfIntfTxHello OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of Hello packets transmitted 
         for this OSPF interface."
    ::= { ospfIntfRxTxStatsEntry 5 }
 
ospfIntfRxDatabase OBJECT-TYPE
    SYNTAX  Counter32 
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of Database Description packets received 
         for this OSPF interface."
    ::= { ospfIntfRxTxStatsEntry 6 }

ospfIntfTxDatabase OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of Database Description packets transmitted 
         for this OSPF interface."
    ::= { ospfIntfRxTxStatsEntry 7 }
 
ospfIntfRxlsReqs OBJECT-TYPE
    SYNTAX  Counter32 
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of Link State Request packets received
         for this OSPF interface."
    ::= { ospfIntfRxTxStatsEntry 8 }

ospfIntfTxlsReqs OBJECT-TYPE
    SYNTAX  Counter32 
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of Link State Request packets transmitted
         for this OSPF interface."
    ::= { ospfIntfRxTxStatsEntry 9 }

ospfIntfRxlsAcks OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of Link State Acknowledgement packets received
         for this OSPF interface."
    ::= { ospfIntfRxTxStatsEntry 10 }
 
ospfIntfTxlsAcks OBJECT-TYPE
    SYNTAX  Counter32 
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of Link State Acknowledgement packets transmitted
         for this OSPF interface."
    ::= { ospfIntfRxTxStatsEntry 11 }

ospfIntfRxlsUpdates OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of Link State Update packets received for 
         this OSPF interface."
    ::= { ospfIntfRxTxStatsEntry 12 }
 
ospfIntfTxlsUpdates OBJECT-TYPE
    SYNTAX  Counter32 
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of Link State Update packets transmitted for 
         this OSPF interface."
    ::= { ospfIntfRxTxStatsEntry 13 }


ospfIntfNbrChangeStats OBJECT-TYPE
    SYNTAX SEQUENCE OF OspfIntfNbrChangeStatsEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "The table of OSPF Interface Neighbour change Statistics."
    ::= { ospfInterface 2 }

ospfIntfNbrChangeStatsEntry OBJECT-TYPE
    SYNTAX OspfIntfNbrChangeStatsEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "OSPF interface Neighbour Change statistics."
    INDEX { ospfIntfNbrIndex }
    ::= { ospfIntfNbrChangeStats 1 }

OspfIntfNbrChangeStatsEntry ::= SEQUENCE {
    ospfIntfNbrIndex        Integer32,
    ospfIntfNbrhello            Counter32,
    ospfIntfNbrStart            Counter32,
    ospfIntfNbrAdjointOk        Counter32,
    ospfIntfNbrNegotiationDone  Counter32,
    ospfIntfNbrExchangeDone     Counter32,
    ospfIntfNbrBadRequests      Counter32,
    ospfIntfNbrBadSequence      Counter32,
    ospfIntfNbrLoadingDone      Counter32,
    ospfIntfNbrN1way            Counter32,
    ospfIntfNbrRstAd            Counter32,
    ospfIntfNbrDown         Counter32,
    ospfIntfNbrN2way            Counter32
    }

ospfIntfNbrIndex OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The index of the OSPF Interface for which these statistics apply."
    ::= { ospfIntfNbrChangeStatsEntry 1 }

ospfIntfNbrhello OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of Hello packets received from neighbours
         in this OSPF interface."
    ::= { ospfIntfNbrChangeStatsEntry 2 }

ospfIntfNbrStart OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of neighbours in this state (i.e. an indication
         that  Hello packets should now be sent to the neighbour at intervals
         of HelloInterval seconds.) in this OSPF interface."
    ::= { ospfIntfNbrChangeStatsEntry  3 }

ospfIntfNbrAdjointOk OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of decisions to be made (again) as to whether
         an adjacency should be established/maintained with the neighbour.
         for this OSPF interface."
    ::= { ospfIntfNbrChangeStatsEntry 4 }

ospfIntfNbrNegotiationDone OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of neighbours in this state wherein the 
         Master/slave relationship has been negotiated, and sequence
         numbers have been exchanged, for this OSPF interface."
    ::= { ospfIntfNbrChangeStatsEntry 5 }

ospfIntfNbrExchangeDone OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of neighbours in this state (i.e. in an
         adjacency's final state) having transimitted a full sequence 
         of Database Description packets, for this OSPF interface."
    ::= { ospfIntfNbrChangeStatsEntry 6 }

ospfIntfNbrBadRequests OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of Link State Requests which have been received
         for a link state advertisement not contained in the database for
         this interface."
    ::= { ospfIntfNbrChangeStatsEntry 7 }

ospfIntfNbrBadSequence OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of Database Description packets which have been
         received that either 
         a) has an unexpected DD sequence number
         b) Unexpectedly has the init bit set
         c) Has an options field differing from the last Options field
            received in a Database Description packet.
         Any of these conditions indicate that some error has occured during
         adjacency establishment for this interface."
    ::= { ospfIntfNbrChangeStatsEntry 8 }

ospfIntfNbrLoadingDone OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of link state updates received for all 
         out-of-date portions of the database for this OSPF interface."
    ::= { ospfIntfNbrChangeStatsEntry 9 }

ospfIntfNbrN1way OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of Hello packets received from neighbours, in
         which this router is not mentioned for this OSPF interface."
    ::= { ospfIntfNbrChangeStatsEntry 10 }

ospfIntfNbrRstAd OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The sum total number of times the Neighbour adjacency has been reset
         on this interface."
    ::= { ospfIntfNbrChangeStatsEntry 11 }

ospfIntfNbrDown OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of Neighbouring routers down (i.e. in the initial
         state of a neighbour conversation.) for this interface."
    ::= { ospfIntfNbrChangeStatsEntry 12 }

ospfIntfNbrN2way OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of Hello packets received from neighbours, in
         which this router is mentioned for this OSPF interface."
    ::= { ospfIntfNbrChangeStatsEntry 13 }

ospfIntfChangeStats OBJECT-TYPE
    SYNTAX SEQUENCE OF OspfIntfChangeStatsEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "The table of OSPF Interface change Statistics."
    ::= { ospfInterface 3 }

ospfIntfChangeStatsEntry OBJECT-TYPE
    SYNTAX OspfIntfChangeStatsEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "OSPF interface Change statistics."
    INDEX { ospfIntfIndex }
    ::= { ospfIntfChangeStats 1 }

OspfIntfChangeStatsEntry ::= SEQUENCE {
    ospfIntfIndex               Integer32,
    ospfIntfHello               Counter32,
    ospfIntfDown            Counter32,
    ospfIntfLoop            Counter32,
    ospfIntfUnloop      Counter32,
    ospfIntfWaitTimer       Counter32,
    ospfIntfBackup          Counter32,
    ospfIntfNbrChange           Counter32
    }

ospfIntfIndex OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The index of the OSPF Interface for which these statistics apply."
    ::= { ospfIntfChangeStatsEntry 1 }

ospfIntfHello OBJECT-TYPE
    SYNTAX    Counter32
    MAX-ACCESS    read-only
    STATUS    current
    DESCRIPTION
        "The total number of Hello packets sent by this interface."
    ::= { ospfIntfChangeStatsEntry 2 }

ospfIntfDown OBJECT-TYPE
    SYNTAX   Counter32
    MAX-ACCESS   read-only
    STATUS   current
    DESCRIPTION
        "The total number of times the interface was down."
    ::= { ospfIntfChangeStatsEntry 3 }

ospfIntfLoop OBJECT-TYPE
    SYNTAX    Counter32
    MAX-ACCESS    read-only
    STATUS    current
    DESCRIPTION
        "The total number of times the interface was no longer connected to 
         the attatched network."
    ::= { ospfIntfChangeStatsEntry 4 }

ospfIntfUnloop OBJECT-TYPE
    SYNTAX   Counter32
    MAX-ACCESS   read-only
    STATUS   current
    DESCRIPTION
        "The total number of times the interface, connected back to
         the attatched network."
    ::= { ospfIntfChangeStatsEntry 5 }

ospfIntfWaitTimer OBJECT-TYPE
    SYNTAX        Counter32
    MAX-ACCESS        read-only
    STATUS        current
    DESCRIPTION
        "The total number of times the Wait Timer has been fired,
         (indicating the end of the waiting period that is required
          before electing a (Backup) Designated Router) for this 
          OSPF interface."
    ::= { ospfIntfChangeStatsEntry 6 }

ospfIntfBackup OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS     read-only
    STATUS     current
    DESCRIPTION
        "The total number of Backup Designated Routers on the attatched
         network for this OSPF interface."
    ::= { ospfIntfChangeStatsEntry 7 }

ospfIntfNbrChange OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS     read-only
    STATUS     current
    DESCRIPTION
        "The total number of changes in the set of bidirectional neighbours
         associated with the interface for this OSPF interface."
    ::= { ospfIntfChangeStatsEntry 8 }

ospfIntfErrorStats OBJECT-TYPE
    SYNTAX SEQUENCE OF OspfIntfErrorStatsEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "The table of OSPF Interface Error Statistics."
    ::= { ospfInterface 4 }

ospfIntfErrorStatsEntry OBJECT-TYPE
    SYNTAX OspfIntfErrorStatsEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "Error Statistics for an OSPF area."
    INDEX { ospfIntfErrIndex }
    ::= { ospfIntfErrorStats 1 }
 
OspfIntfErrorStatsEntry ::= SEQUENCE {
    ospfIntfErrIndex        Integer32,
    ospfIntfErrAuthFailure      Counter32,
    ospfIntfErrNetmaskMismatch  Counter32,
    ospfIntfErrHelloMismatch    Counter32,
    ospfIntfErrDeadMismatch     Counter32,
    ospfIntfErrOptionsMismatch  Counter32,
    ospfIntfErrUnknownNbr       Counter32,
    ospfIntfErrAreaMismatch     Counter32,
    ospfIntfErrInvalidSelfOrigLSA Counter32
    }

ospfIntfErrIndex OBJECT-TYPE
    SYNTAX    Integer32
    MAX-ACCESS    read-only
    STATUS    current
    DESCRIPTION
        "The index of the OSPF Intf for which these statistics apply."
    ::= { ospfIntfErrorStatsEntry 1 }

ospfIntfErrAuthFailure OBJECT-TYPE
    SYNTAX    Counter32
    MAX-ACCESS    read-only
    STATUS    current
    DESCRIPTION
        "The total number of packets received with a wrong password in 
         this area."
    ::= { ospfIntfErrorStatsEntry 2 }

ospfIntfErrNetmaskMismatch OBJECT-TYPE
    SYNTAX    Counter32
    MAX-ACCESS    read-only
    STATUS    current
    DESCRIPTION
        "The total number of packets received with a wrong netmask in 
         this area."
    ::= { ospfIntfErrorStatsEntry 3 }

ospfIntfErrHelloMismatch OBJECT-TYPE
    SYNTAX    Counter32
    MAX-ACCESS    read-only
    STATUS    current
    DESCRIPTION
        "The total number of packets received with a different hello interval
         in this area."
    ::= { ospfIntfErrorStatsEntry 4 }

ospfIntfErrDeadMismatch OBJECT-TYPE
    SYNTAX    Counter32
    MAX-ACCESS    read-only
    STATUS    current
    DESCRIPTION
        "The total number of packets received with a different dead interval
         in this area."
    ::= { ospfIntfErrorStatsEntry 5 }

ospfIntfErrOptionsMismatch OBJECT-TYPE
    SYNTAX    Counter32
    MAX-ACCESS    read-only
    STATUS    current
    DESCRIPTION
        "The total number of packets received with a different options
         in this area."
    ::= { ospfIntfErrorStatsEntry 6 }

ospfIntfErrUnknownNbr OBJECT-TYPE
    SYNTAX    Counter32
    MAX-ACCESS    read-only
    STATUS    current
    DESCRIPTION
        "The total number of packets received from an unknown neighbor
         in this area."
    ::= { ospfIntfErrorStatsEntry 7 }

ospfIntfErrAreaMismatch OBJECT-TYPE
    SYNTAX    Counter32
    MAX-ACCESS    read-only
    STATUS    current
    DESCRIPTION
        "The total number of packets received with a wrong  area."
    ::= { ospfIntfErrorStatsEntry 8 }

ospfIntfErrInvalidSelfOrigLSA OBJECT-TYPE
    SYNTAX   Counter32
    MAX-ACCESS   read-only
    STATUS   current
    DESCRIPTION
        "The total number of packets received with invalid self-orig LSAs."
    ::= { ospfIntfErrorStatsEntry 9 }

-- Ospf General Statistics contains the cumulative stats for all
-- areas / interfaces
ospfCumRxPkts OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The sum total of all OSPF packets received on all OSPF areas
         and interfaces."
    ::= { ospfCumRxTxStats 1 }
 
ospfCumTxPkts OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The sum total of all OSPF packets transmitted on all OSPF areas
         and interfaces."
    ::= { ospfCumRxTxStats 2 }
 
ospfCumRxHello OBJECT-TYPE
    SYNTAX  Counter32 
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The sum total of all Hello packets received on all OSPF areas
         and interfaces."
    ::= { ospfCumRxTxStats 3 }

ospfCumTxHello OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The sum total of all Hello packets transmitted on all OSPF areas
         and interfaces."
    ::= { ospfCumRxTxStats 4 }
 
ospfCumRxDatabase OBJECT-TYPE
    SYNTAX  Counter32 
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The sum total of all Database Description packets received on
         all OSPF areas and interfaces."
    ::= { ospfCumRxTxStats 5 }

ospfCumTxDatabase OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The sum total of all Database Description packets transmitted on
         all OSPF areas and interfaces."
    ::= { ospfCumRxTxStats 6 }
 
ospfCumRxlsReqs OBJECT-TYPE
    SYNTAX  Counter32 
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The sum total of all Link State Request packets received on
         all OSPF areas and interfaces."
    ::= { ospfCumRxTxStats 7 }

ospfCumTxlsReqs OBJECT-TYPE
    SYNTAX  Counter32 
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The sum total of all Link State Request packets transmitted on
         all OSPF areas and interfaces."
    ::= { ospfCumRxTxStats 8 }

ospfCumRxlsAcks OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The sum total of all Link State Acknowledgement packets received
         on all OSPF areas and interfaces."
    ::= { ospfCumRxTxStats 9 }
 
ospfCumTxlsAcks OBJECT-TYPE
    SYNTAX  Counter32 
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The sum total of all Link State Acknowledgement packets transmitted
         on all OSPF areas and interfaces."
    ::= { ospfCumRxTxStats 10 }

ospfCumRxlsUpdates OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The sum total of all Link State Update packets received
         on all OSPF areas and interfaces."
    ::= { ospfCumRxTxStats 11 }
 
ospfCumTxlsUpdates OBJECT-TYPE
    SYNTAX  Counter32 
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The sum total of all Link State Update packets transmitted
         on all OSPF areas and interfaces."
    ::= { ospfCumRxTxStats 12 }

ospfCumNbrhello OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The sum total of all Hello packets received from neighbours
         on all OSPF areas and interfaces."
    ::= { ospfCumNbrChangeStats 1 }

ospfCumNbrStart OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The sum total number of neighbours in this state (i.e. an indication
         that  Hello packets should now be sent to the neighbour at intervals
         of HelloInterval seconds.) across all OSPF areas and interfaces."
    ::= { ospfCumNbrChangeStats 2 }

ospfCumNbrAdjointOk OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The sum total number of decisions to be made (again) as to whether
         an adjacency should be established/maintained with the neighbour
         across all OSPF areas and interfaces."
    ::= { ospfCumNbrChangeStats 3 }

ospfCumNbrNegotiationDone OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The sum total number of neighbours in this state wherein the 
         Master/slave relationship has been negotiated, and sequence
         numbers have been exchanged, across all OSPF areas and 
         interfaces."
    ::= { ospfCumNbrChangeStats 4 }

ospfCumNbrExchangeDone OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The sum total number of neighbours in this state (i.e. in an
         adjacency's final state) having transimitted a full sequence 
         of Database Description packets, across all OSPF areas
         and interfaces."
    ::= { ospfCumNbrChangeStats 5 }

ospfCumNbrBadRequests OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The sum total number of Link State Requests which have been received
         for a link state advertisement not contained in the database across
         all interfaces and OSPF areas."
    ::= { ospfCumNbrChangeStats 6 }

ospfCumNbrBadSequence OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The sum total number of Database Description packets which have been
         received that either 
         a) has an unexpected DD sequence number
         b) Unexpectedly has the init bit set
         c) Has an options field differing from the last Options field
            received in a Database Description packet.
         Any of these conditions indicate that some error has occured during
         adjacency establishment for all OSPF areas and interfaces."
    ::= { ospfCumNbrChangeStats 7 }

ospfCumNbrLoadingDone OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The sum total number of link state updates received for all 
         out-of-date portions of the database across all OSPF areas
         and interfaces."
    ::= { ospfCumNbrChangeStats 8 }

ospfCumNbrN1way OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The sum total number of Hello packets received from neighbours, in
         which this router is not mentioned across all OSPF interfaces
         and areas."
    ::= { ospfCumNbrChangeStats 9 }

ospfCumNbrRstAd OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The sum total number of times the Neighbour adjacency has been reset
         across all OPSF areas and interfaces."
    ::= { ospfCumNbrChangeStats 10 }

ospfCumNbrDown OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of Neighbouring routers down (i.e. in the initial
         state of a neighbour conversation.) across all OSPF areas and 
         interfaces."
    ::= { ospfCumNbrChangeStats 11 }

ospfCumNbrN2way OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The sum total number of Hello packets received from neighbours, in
         which this router is mentioned across all OSPF interfaces
         and areas."
    ::= { ospfCumNbrChangeStats 12 }

ospfCumIntfHello OBJECT-TYPE
    SYNTAX    Counter32
    MAX-ACCESS    read-only
    STATUS    current
    DESCRIPTION
        "The sum total number of Hello packets sent on all interfaces 
         and areas"
    ::= { ospfCumIntfChangeStats 1 }

ospfCumIntfDown OBJECT-TYPE
    SYNTAX   Counter32
    MAX-ACCESS   read-only
    STATUS   current
    DESCRIPTION
        "The sum total number of interfaces down in all OSPF areas."
    ::= { ospfCumIntfChangeStats 2 }

ospfCumIntfLoop OBJECT-TYPE
    SYNTAX    Counter32
    MAX-ACCESS    read-only
    STATUS    current
    DESCRIPTION
        "The sum total of interfaces no longer connected to 
         the attatched network across all OSPF areas and interfaces."
    ::= { ospfCumIntfChangeStats 3 }

ospfCumIntfUnloop OBJECT-TYPE
    SYNTAX   Counter32
    MAX-ACCESS   read-only
    STATUS   current
    DESCRIPTION
        "The sum total number of interfaces, connected to
         the attatched network in all OSPF areas."
    ::= { ospfCumIntfChangeStats 4 }

ospfCumIntfWaitTimer OBJECT-TYPE
    SYNTAX        Counter32
    MAX-ACCESS        read-only
    STATUS        current
    DESCRIPTION
        "The sum total number of times the Wait Timer has been fired,
         (indicating the end of the waiting period that is required
          before electing a (Backup) Designated Router) across all 
          OSPF areas and interfaces."
    ::= { ospfCumIntfChangeStats 5 }

ospfCumIntfBackup OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS     read-only
    STATUS     current
    DESCRIPTION
        "The sum total number of Backup Designated Routers on the attatched
         network for all OSPF areas and interfaces."
    ::= { ospfCumIntfChangeStats 6 }

ospfCumIntfNbrChange OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS     read-only
    STATUS     current
    DESCRIPTION
        "The sum total number of changes in the set of bidirectional
         neighbours associated with any interface across all OSPF areas."
    ::= { ospfCumIntfChangeStats 7 }

ospfTmrsKckOffHello OBJECT-TYPE
    SYNTAX    Counter32
    MAX-ACCESS    read-only
    STATUS    current
    DESCRIPTION
        "The sum total number of times the Hello timer has been fired
         (which triggers the send of a Hello packet) across all OPSF 
         areas and interfaces."
    ::= { ospfTimersKickOffStats 1 }

ospfTmrsKckOffRetransmit OBJECT-TYPE
    SYNTAX   Counter32
    MAX-ACCESS   read-only
    STATUS   current
    DESCRIPTION
        "The sum total number of times the Retransmit timer has been
         fired across all OPSF areas and interfaces."
    ::= { ospfTimersKickOffStats 2 }

ospfTmrsKckOffLsaLock OBJECT-TYPE
    SYNTAX    Counter32
    MAX-ACCESS    read-only
    STATUS    current
    DESCRIPTION
        "The sum total number of times the Lsa Lock timer has been 
         fired across all OSPF areas and interfaces."
    ::= { ospfTimersKickOffStats 3 }

ospfTmrsKckOffLsaAck OBJECT-TYPE
    SYNTAX   Counter32
    MAX-ACCESS   read-only
    STATUS   current
    DESCRIPTION
        "The sum total number of times the Lsa Ack timer has been 
         fired across all ospf areas and interfaces."
    ::= { ospfTimersKickOffStats 4 }

ospfTmrsKckOffDbage OBJECT-TYPE
    SYNTAX        Counter32
    MAX-ACCESS        read-only
    STATUS        current
    DESCRIPTION
        "The total number of times the Dbage has been fired."
    ::= { ospfTimersKickOffStats 5 }

ospfTmrsKckOffSummary OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS     read-only
    STATUS     current
    DESCRIPTION
        "The total number of times the Summary timer has been fired."
    ::= { ospfTimersKickOffStats 6 }

ospfTmrsKckOffAseExport OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS     read-only
    STATUS     current
    DESCRIPTION
        "The total number of times the ASE Export timer has been fired."
    ::= { ospfTimersKickOffStats 7 }



-- IGMP Snooping statistics
igmpSnoopStats OBJECT-TYPE
  SYNTAX SEQUENCE OF IgmpSnoopStatsEntry
  MAX-ACCESS not-accessible
  STATUS current
   DESCRIPTION
      "Statistics for IGMP Snooping."
    ::= { igmpStats 1 }

igmpSnoopStatsEntry OBJECT-TYPE
    SYNTAX IgmpSnoopStatsEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "Statistics for IGMP Snooping."
    INDEX { igmpSnoopVlanIndex }
    ::= { igmpSnoopStats 1 }
 
IgmpSnoopStatsEntry ::= SEQUENCE {
    igmpSnoopVlanIndex      INTEGER,
    rxIgmpValidPkts             Counter32,
    rxIgmpInvalidPkts           Counter32,
    rxIgmpGenQueries            Counter32,
    rxIgmpGrpSpecificQueries    Counter32,
    rxIgmpLeaves                Counter32,
    rxIgmpDiscardPkts           Counter32,
    rxIgmpReports               Counter32,
    rxIgmpPimHellos             Counter32,
    txIgmpGenQueries            Counter32,
    txIgmpGrpSpecificQueries    Counter32,
    txIgmpReports               Counter32,
    igmpClearVlanStats          INTEGER,
    txIgmpLeaves                         Counter32,
    rxIgmpGroupSourceSpecificQueries     Counter32,
    rxIgmpV3CurrentStateRecords          Counter32,
    rxIgmpV3SourceListChangeRecords      Counter32,
    rxIgmpV3FilterChangeRecords          Counter32
    }

igmpSnoopVlanIndex OBJECT-TYPE
    SYNTAX    INTEGER
    MAX-ACCESS    read-only
    STATUS    current
    DESCRIPTION
        "The index of the VLAN for which these statistics apply."
    ::= { igmpSnoopStatsEntry 1 }

rxIgmpValidPkts OBJECT-TYPE
    SYNTAX    Counter32
    MAX-ACCESS    read-only
    STATUS    current
    DESCRIPTION
        "The total number of valid IGMP packets received 
         on this VLAN." 
    ::= { igmpSnoopStatsEntry 2 }

rxIgmpInvalidPkts OBJECT-TYPE
    SYNTAX    Counter32
    MAX-ACCESS    read-only
    STATUS    current
    DESCRIPTION
        "The total number of invalid IGMP packets received 
         on this VLAN." 
    ::= { igmpSnoopStatsEntry 3 }

rxIgmpGenQueries OBJECT-TYPE
    SYNTAX    Counter32
    MAX-ACCESS    read-only
    STATUS    current
    DESCRIPTION
        "The total number of IGMP General Query packets received
         on this VLAN." 
    ::= { igmpSnoopStatsEntry 4 }

rxIgmpGrpSpecificQueries OBJECT-TYPE
    SYNTAX    Counter32
    MAX-ACCESS    read-only
    STATUS    current
    DESCRIPTION
        "The total number of IGMP Group Specific Query packets received
         on this VLAN." 
    ::= { igmpSnoopStatsEntry 5 }

rxIgmpLeaves OBJECT-TYPE
    SYNTAX    Counter32
    MAX-ACCESS    read-only
    STATUS    current
    DESCRIPTION
        "The total number of IGMP Leave packets received
         on this VLAN." 
    ::= { igmpSnoopStatsEntry 6 }

rxIgmpReports OBJECT-TYPE
    SYNTAX    Counter32
    MAX-ACCESS    read-only
    STATUS    current
    DESCRIPTION
        "The total number of IGMP Report packets received
         on this VLAN." 
    ::= { igmpSnoopStatsEntry 7 }

txIgmpGrpSpecificQueries OBJECT-TYPE
    SYNTAX    Counter32
    MAX-ACCESS    read-only
    STATUS    current
    DESCRIPTION
        "The total number of IGMP Group Specific Query packets
         transmitted on this VLAN." 
    ::= { igmpSnoopStatsEntry 8 }

txIgmpReports OBJECT-TYPE
    SYNTAX    Counter32
    MAX-ACCESS    read-only
    STATUS    current
    DESCRIPTION
        "The total number of IGMP Report packets transmitted
         on this VLAN." 
    ::= { igmpSnoopStatsEntry 9 }

txIgmpLeaves OBJECT-TYPE
    SYNTAX    Counter32
    MAX-ACCESS    read-only
    STATUS    current
    DESCRIPTION
        "The total number of IGMP Leave packets transmitted
         on this VLAN." 
    ::= { igmpSnoopStatsEntry 10 }

rxIgmpGroupSourceSpecificQueries OBJECT-TYPE
    SYNTAX    Counter32
    MAX-ACCESS    read-only
    STATUS    current
    DESCRIPTION
        "The total number of IGMP Group Source Specific (GSSQ) Queries received
         on this VLAN." 
    ::= { igmpSnoopStatsEntry 11 }

rxIgmpV3CurrentStateRecords OBJECT-TYPE
    SYNTAX    Counter32
    MAX-ACCESS    read-only
    STATUS    current
    DESCRIPTION
        "The total number of IGMP Current State Records (CSRs) received
         on this VLAN." 
    ::= { igmpSnoopStatsEntry 12 }

rxIgmpV3SourceListChangeRecords OBJECT-TYPE
    SYNTAX    Counter32
    MAX-ACCESS    read-only
    STATUS    current
    DESCRIPTION
        "The total number of IGMP Source List Change Records (SLCRs) received
         on this VLAN." 
    ::= { igmpSnoopStatsEntry 13 }

rxIgmpV3FilterChangeRecords OBJECT-TYPE
    SYNTAX    Counter32
    MAX-ACCESS    read-only
    STATUS    current
    DESCRIPTION
        "The total number of IGMP Filter Mode Change Records (FMCRs) received
         on this VLAN." 
    ::= { igmpSnoopStatsEntry 14 }

txIgmpGenQueries OBJECT-TYPE
    SYNTAX    Counter32
    MAX-ACCESS    read-only
    STATUS    current
    DESCRIPTION
        "The total number of IGMP General Query packets send
         on this VLAN." 
    ::= { igmpSnoopStatsEntry 16 }

rxIgmpDiscardPkts OBJECT-TYPE
    SYNTAX    Counter32
    MAX-ACCESS    read-only
    STATUS    current
    DESCRIPTION
        "The total number of IGMP packets discarded
         on this VLAN." 
    ::= { igmpSnoopStatsEntry 17 }

rxIgmpPimHellos OBJECT-TYPE
    SYNTAX    Counter32
    MAX-ACCESS    read-only
    STATUS    current
    DESCRIPTION
        "The total number of Pim Hello packets received
         on this VLAN." 
    ::= { igmpSnoopStatsEntry 18 }

igmpClearVlanStats OBJECT-TYPE
    SYNTAX  INTEGER { 
    clear(1),
    ok(2)
    }
    MAX-ACCESS  read-write
    STATUS  current  
    DESCRIPTION
        "Setting this to clear(1) results in clearing the statistics for this
         snooping VLAN." 
    ::= { igmpSnoopStatsEntry 19 }

igmpClearAllStats OBJECT-TYPE
    SYNTAX  INTEGER { 
    clear(1),
    ok(2)
    }
    MAX-ACCESS  read-write
    STATUS  current  
    DESCRIPTION
        "Setting this to clear(1) results in clearing the IGMP statistics." 
    ::= { igmpStats 2 }

igmpStatsTotalIgmpGroups OBJECT-TYPE 
    SYNTAX  Counter32 
    MAX-ACCESS  read-only
    STATUS  current 
    DESCRIPTION 
        "The total number of IGMP groups."
    ::= { igmpStats 3 }

igmpStatsTotalIpmcGroups OBJECT-TYPE 
    SYNTAX  Counter32 
    MAX-ACCESS  read-only
    STATUS  current 
    DESCRIPTION 
        "The total number of IPMC groups."
    ::= { igmpStats 4 }





ipv6InReceives OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of input datagrams received from
         interfaces, including those received in error."
    ::= { ipv6Stats 1 }
    
ipv6InMcasts OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of multicast packets received from
         interfaces, including those received in error."
    ::= { ipv6Stats 2 }

ipv6InDelivers OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Total datagrams given to upper layer - ICMP/UDP"
    ::= { ipv6Stats 3 }

ipv6InDiscards OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Total datagrams discarded despite no errors"
    ::= { ipv6Stats 4 }

ipv6InHdrerrs OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Total datagrams with error in IPv6/Option headers"
    ::= { ipv6Stats 5 }

ipv6InAddrerrs OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Total datagrams with error in destination address"
    ::= { ipv6Stats 6 }

ipv6InUnkprots OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Total datagrams with unknown/unsupported protocol"
    ::= { ipv6Stats 7 }

ipv6InTruncs OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Total datagrams with insufficient data"
    ::= { ipv6Stats 8 }

ipv6OutMcasts OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Total sent multicast pkts"
    ::= { ipv6Stats 10 }

ipv6ForwDgrams OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Total datagrams attempted to be forwarded"
    ::= { ipv6Stats 11 }

ipv6TooBigerrs OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Total datagrams which could not be forwarded
        as their size exceeds (Path) MTU"
    ::= { ipv6Stats 12 }

ipv6OutReqs OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Total datagrams attempted to be sent"
    ::= { ipv6Stats 13 }

ipv6OutDiscards OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Total outgoing Datagrams discarded despite no errors"
    ::= { ipv6Stats 14 }

ipv6OutNorts OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Total datagrams discarded due to no routes"
    ::= { ipv6Stats 15 }

ipv6Reasmreqs OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Total datagrams needing reassembly"
    ::= { ipv6Stats 16 }

ipv6Reasmoks OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Total datagrams successfully reassembled"
    ::= { ipv6Stats 17 }

ipv6Reasmfails OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Total datagrams for witch reassembly failured"
    ::= { ipv6Stats 18 }

ipv6Fragoks OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Total datagrams successfully fragmented"
    ::= { ipv6Stats 19 }

ipv6Fragfails OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Total datagrams for witch fragmentation failured"
    ::= { ipv6Stats 20 }

ipv6Fragcreates OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Total number of fragments created"
    ::= { ipv6Stats 21 }

ipv6InNsols OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Total number of received Neighbor Solicitations"
    ::= { ipv6Stats 22 }

ipv6InNadvs OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Total number of received Neighbor Advertisements"
    ::= { ipv6Stats 23 }

ipv6InRoutsols OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Total number of received Router Solicitations"
    ::= { ipv6Stats 25 }

ipv6InRoutadvs OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Total number of received Router Advertisements"
    ::= { ipv6Stats 26 }

ipv6InRoutRedirs OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Total number of received Router Redirect messages"
    ::= { ipv6Stats 27 }

ipv6OutNsols OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Total number of sent Neighbor Solicitations"
    ::= { ipv6Stats 28 }

ipv6OutNadvs OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Total number of sent Neighbor Advertisements"
    ::= { ipv6Stats 29 }

ipv6OutRoutadvs OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Total number of sent Router Advertisements"
    ::= { ipv6Stats 30 }

ipv6OutRedirs OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Total number of sent Redirects"
    ::= { ipv6Stats 31 }

ipv6OutRoutSols OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Total number of sent Router Solicitations"
    ::= { ipv6Stats 32 }

-- Please see tIp6If structure: u4RaSchedTime and u4RaSentTime are interface
-- parameters. They are not part of interface statistics (tIp6IfStats stats;).
-- ipv6RaSchedTime OBJECT-TYPE
--     SYNTAX  Counter32
--     MAX-ACCESS  read-only
--     STATUS  current
--     DESCRIPTION
--         "Next multicast Router Advertisement scheduled time"
--     ::= { ipv6Stats 36 }

-- ipv6RaSentTime OBJECT-TYPE
--     SYNTAX  Counter32
--     MAX-ACCESS  read-only
--     STATUS  current
--     DESCRIPTION
--         "Last Router Advertisement sent time"
--     ::= { ipv6Stats 37 }

ipv6icmpInMsgs OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of ICMP messages received."
    ::= { ipv6Stats 39 }

ipv6icmpInErrs OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of ICMP messages attempted to send."
    ::= { ipv6Stats 40 }

ipv6icmpInBadcode OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of ICMP messages in bad code."
    ::= { ipv6Stats 41 }

ipv6icmpInToobig OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The number of ICMP too big messages received."
    ::= { ipv6Stats 42 }

ipv6icmpInDstUnreach OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The number of ICMP Destination Unreachable messages received."
    ::= { ipv6Stats 43 }

ipv6icmpInTmexceeded OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The number of ICMP Time Exceeded messages received."
    ::= { ipv6Stats 44 }

ipv6icmpInParamprob OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The number of ICMP Parameter Problem messages received."
    ::= { ipv6Stats 45 }

ipv6icmpInEchoReq OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The number of ICMP Echo request messages received."
    ::= { ipv6Stats 46 }

ipv6icmpInEchoResp OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The number of ICMP Echo Reply messages received."
    ::= { ipv6Stats 47 }

ipv6icmpOutMsgs OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of ICMP messages which this entity
         attempted to send."
    ::= { ipv6Stats 48 }

ipv6icmpOutErrs OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The number of ICMP messages which this entity did not
         send due to problems discovered within ICMP
         such as a lack of buffers."
    ::= { ipv6Stats 49 }

ipv6icmpOutDstUnreach OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The number of ICMP Destination Unreachable messages sent."
    ::= { ipv6Stats 50 }

ipv6icmpOutToobig OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The number of ICMP too big messages sent."
    ::= { ipv6Stats 51 }

ipv6icmpOutTmexceeded OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The number of ICMP Time Exceeded messages sent."
    ::= { ipv6Stats 52 }

ipv6icmpOutParamprob OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The number of ICMP Parameter Problem messages sent."
    ::= { ipv6Stats 53 }

ipv6icmpOutEchoReq OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The number of ICMP Echo request messages sent."
    ::= { ipv6Stats 54 }

ipv6icmpOutEchoResp OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The number of ICMP Echo Reply messages sent."
    ::= { ipv6Stats 55 }

ipv6icmpInRouterSol OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The number of ICMP router solicitations received."
    ::= { ipv6Stats 56 }

ipv6icmpInRouterAdv OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The number of ICMP router advertisements received."
    ::= { ipv6Stats 57 }

ipv6icmpInNeighSol OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The number of ICMP neighbor solicitations received."
    ::= { ipv6Stats 58 }

ipv6icmpInNeighAdv OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The number of ICMP neighbor advertisements received."
    ::= { ipv6Stats 59 }

ipv6icmpInRedir OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The number of ICMP Redirect messages received."
    ::= { ipv6Stats 60 }

ipv6icmpOutRouterSol OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The number of ICMP router solicitations sent."
    ::= { ipv6Stats 61 }

ipv6icmpOutRouterAdv OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The number of ICMP router advertisements sent."
    ::= { ipv6Stats 62 }

ipv6icmpOutNeighSol OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The number of ICMP neighbor solicitations sent."
    ::= { ipv6Stats 63 }

ipv6icmpOutNeighAdv OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The number of ICMP neighbor advertisements sent."
    ::= { ipv6Stats 64 }

ipv6icmpOutRedir OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The number of ICMP Redirect messages sent."
    ::= { ipv6Stats 65 }

ipv6udpInDgrams OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Total number of UDP received datagrams."
    ::= { ipv6Stats 66 }

ipv6udpInErrs OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Total number of UDP error encountered during
         processing of packet."
    ::= { ipv6Stats 67 }

ipv6udpOutDgrams OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Total number of UDP datagrams passed to IP6 layer."
    ::= { ipv6Stats 68 }

ipv6udpNumPorts OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Total number of UDP ports that are currently open."
    ::= { ipv6Stats 69 }

ipv6icmpInAdminProhib OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of received Destination Unreachable
         ICMP packets."
    ::= { ipv6Stats 70 }

ipv6icmpOutAdminProhib OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of sent Destination Unreachable
         ICMP packets."
    ::= { ipv6Stats 71 }


-- Ospf3 Statistics 

-- Ospf3 Statistics for all interfaces and Ospf3 areas 
ospf3GeneralStats       OBJECT IDENTIFIER ::= { ospf3Stats  1 }
ospf3CumRxTxDisdStats   OBJECT IDENTIFIER ::= { ospf3GeneralStats  1 }
ospf3CumNbrChangeStats  OBJECT IDENTIFIER ::= { ospf3GeneralStats  2 }
ospf3CumIntfChangeStats OBJECT IDENTIFIER ::= { ospf3GeneralStats  3 }
ospf3TimersKickOffStats OBJECT IDENTIFIER ::= { ospf3GeneralStats  4 }

-- Ospf3 Statistics / Area
ospf3Area          OBJECT IDENTIFIER ::= { ospf3Stats  2 }

ospf3AreaRxTxDisdStats OBJECT-TYPE
    SYNTAX SEQUENCE OF Ospf3AreaRxTxDisdStatsEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "The table of Ospf3 Area Rx/Tx Statistics."
    ::= { ospf3Area 1 }

ospf3AreaRxTxDisdStatsEntry OBJECT-TYPE
    SYNTAX Ospf3AreaRxTxDisdStatsEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "Rx Tx packet Statistics about a Ospf3 area."
    INDEX { ospf3AreaRxTxDisdIndex }
    ::= { ospf3AreaRxTxDisdStats 1 }
 
Ospf3AreaRxTxDisdStatsEntry ::= SEQUENCE {
    ospf3AreaRxTxDisdIndex      Integer32,
    ospf3AreaRxPkts             Counter32,
    ospf3AreaTxPkts             Counter32,
    ospf3AreaDisdPkts           Counter32, 
    ospf3AreaRxHello            Counter32,
    ospf3AreaTxHello            Counter32,
    ospf3AreaDisdHello          Counter32,
    ospf3AreaRxDatabase         Counter32,
    ospf3AreaTxDatabase         Counter32,
    ospf3AreaDisdDatabase       Counter32,
    ospf3AreaRxlsReqs           Counter32,
    ospf3AreaTxlsReqs           Counter32,
    ospf3AreaDisdlsReqs         Counter32,
    ospf3AreaRxlsAcks           Counter32,
    ospf3AreaTxlsAcks           Counter32,
    ospf3AreaDisdlsAcks         Counter32,
    ospf3AreaRxlsUpdates        Counter32,
    ospf3AreaTxlsUpdates        Counter32,
    ospf3AreaDisdlsUpdates      Counter32
    }

ospf3AreaRxTxDisdIndex OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The index of the ospf3 Area for which these statistics apply."
    ::= { ospf3AreaRxTxDisdStatsEntry 1 }

ospf3AreaRxPkts OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of Ospf3 packets received in this Ospf3 area."
    ::= { ospf3AreaRxTxDisdStatsEntry 2 }
 
ospf3AreaTxPkts OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of Ospf3 packets transmitted in this Ospf3 area."
    ::= { ospf3AreaRxTxDisdStatsEntry 3 }
    
ospf3AreaDisdPkts OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of Ospf3 packets discaded in this Ospf3 area."
    ::= { ospf3AreaRxTxDisdStatsEntry 4 }
 
ospf3AreaRxHello OBJECT-TYPE
    SYNTAX  Counter32 
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of Hello packets received in this Ospf3 area."
    ::= { ospf3AreaRxTxDisdStatsEntry 5 }

ospf3AreaTxHello OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of Hello packets transmitted in this Ospf3
         area."
    ::= { ospf3AreaRxTxDisdStatsEntry 6 }
    
ospf3AreaDisdHello OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of Hello packets discaded in this Ospf3
         area."
    ::= { ospf3AreaRxTxDisdStatsEntry 7 }
 
ospf3AreaRxDatabase OBJECT-TYPE
    SYNTAX  Counter32 
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of Database Description packets transmitted 
         for this Ospf3 area."
    ::= { ospf3AreaRxTxDisdStatsEntry 8 }

ospf3AreaTxDatabase OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of Database Description packets transmitted 
         for this Ospf3 area."
    ::= { ospf3AreaRxTxDisdStatsEntry 9 }
    
ospf3AreaDisdDatabase OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of Database Description packets discarded 
         for this Ospf3 area."
    ::= { ospf3AreaRxTxDisdStatsEntry 10 }
 
 
ospf3AreaRxlsReqs OBJECT-TYPE
    SYNTAX  Counter32 
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of Link State Request packets received for 
         this Ospf3 area."
    ::= { ospf3AreaRxTxDisdStatsEntry 11 }

ospf3AreaTxlsReqs OBJECT-TYPE
    SYNTAX  Counter32 
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of Link State Request packets transmitted for 
         this Ospf3 area."
    ::= { ospf3AreaRxTxDisdStatsEntry 12 }
    
ospf3AreaDisdlsReqs OBJECT-TYPE
    SYNTAX  Counter32 
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of Link State Request packets discarded for 
         this Ospf3 area."
    ::= { ospf3AreaRxTxDisdStatsEntry 13 }

ospf3AreaRxlsAcks OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of Link State Acknowledgement packets received for 
         this Ospf3 area."
    ::= { ospf3AreaRxTxDisdStatsEntry 14 }
 
ospf3AreaTxlsAcks OBJECT-TYPE
    SYNTAX  Counter32 
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of Link State Acknowledgement packets transmitted
         for this Ospf3 area."
    ::= { ospf3AreaRxTxDisdStatsEntry 15 }
    
ospf3AreaDisdlsAcks OBJECT-TYPE
    SYNTAX  Counter32 
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of Link State Acknowledgement packets discarded
         for this Ospf3 area."
    ::= { ospf3AreaRxTxDisdStatsEntry 16 }

ospf3AreaRxlsUpdates OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of Link State Update packets received for 
         this Ospf3 area."
    ::= { ospf3AreaRxTxDisdStatsEntry 17 }
 
ospf3AreaTxlsUpdates OBJECT-TYPE
    SYNTAX  Counter32 
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of Link State Update packets transmitted for 
         this Ospf3 area."
    ::= { ospf3AreaRxTxDisdStatsEntry 18 }
    
ospf3AreaDisdlsUpdates OBJECT-TYPE
    SYNTAX  Counter32 
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of Link State Update packets discarded for 
         this Ospf3 area."
    ::= { ospf3AreaRxTxDisdStatsEntry 19 }

ospf3AreaNbrChangeStats OBJECT-TYPE
    SYNTAX SEQUENCE OF Ospf3AreaNbrChangeStatsEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "The table of Ospf3 Neighbor change Statistics."
    ::= { ospf3Area 2 }

ospf3AreaNbrChangeStatsEntry OBJECT-TYPE
    SYNTAX Ospf3AreaNbrChangeStatsEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "Ospf3 Neighbor Change statistics."
    INDEX { ospf3AreaNbrIndex }
    ::= { ospf3AreaNbrChangeStats 1 }

Ospf3AreaNbrChangeStatsEntry ::= SEQUENCE {
    ospf3AreaNbrIndex           Integer32,
    ospf3AreaNbrDown            Counter32,
    ospf3AreaNbrAttempt     Counter32,
    ospf3AreaNbrInit            Counter32,
    ospf3AreaNbrN2way           Counter32,
    ospf3AreaNbrExStart         Counter32,
    ospf3AreaNbrExchange        Counter32,
    ospf3AreaNbrLoading         Counter32,
    ospf3AreaNbrFull        Counter32,
    ospf3AreaNbrAllEvents       Counter32
    }

ospf3AreaNbrIndex OBJECT-TYPE
    SYNTAX  Integer32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The index of the Ospf3 Area for which these statistics apply."
    ::= { ospf3AreaNbrChangeStatsEntry 1 }

ospf3AreaNbrDown OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of times neighbors now existing on this area
        have changed into DOWN state."
    ::= { ospf3AreaNbrChangeStatsEntry 2 }

ospf3AreaNbrAttempt OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of times neighbors now existing on this area
        have changed into ATTEMPT state."
    ::= { ospf3AreaNbrChangeStatsEntry  3 }

ospf3AreaNbrInit OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of times neighbors now existing on this area
        have changed into INIT state."
    ::= { ospf3AreaNbrChangeStatsEntry 4 }

ospf3AreaNbrN2way OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of times neighbors now existing on this area
        have changed into 2WAY state."
    ::= { ospf3AreaNbrChangeStatsEntry 5 }

ospf3AreaNbrExStart OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of times neighbors now existing on this area
        have changed into EXSTART state."
    ::= { ospf3AreaNbrChangeStatsEntry 6 }

ospf3AreaNbrExchange OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of times neighbors now existing on this area
        have changed into EXCHANGE state."
    ::= { ospf3AreaNbrChangeStatsEntry 7 }

ospf3AreaNbrLoading OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of times neighbors now existing on this area
        have changed into LOADING state."
    ::= { ospf3AreaNbrChangeStatsEntry 8 }

ospf3AreaNbrFull OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of times neighbors now existing on this area
        have changed into FULL state."
    ::= { ospf3AreaNbrChangeStatsEntry 9 }

ospf3AreaNbrAllEvents OBJECT-TYPE
    SYNTAX  Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "The total number of times neighbors now existing on this area
        have changed state or an error had occured."
    ::= { ospf3AreaNbrChangeStatsEntry 10 }
    
ospf3AreaIntfChangeStats OBJECT-TYPE