Anybody know how to config for H3C core switch? I am getting below:
comwarescraper.pl(5536): |Warning|: No mac-address table data received from 10: Use netdbctl -debug 3 or higher for more info, or disable mac-address tables on 10 in the devicelist.csv with nomac if mac table unsupported on this device.
Thu Oct 13 21:19:23 2016: netdbctl(5500): comwarescraper.pl(5536): Getting the Interface Status Table on 10.50.4.1
Thu Oct 13 21:19:24 2016: netdbctl(5500): iosscraper.pl(5529): Getting the Interface Descriptions on 10.54.0.5
Thu Oct 13 21:19:34 2016: netdbctl(5500): comwarescraper.pl(5536): Getting the ARP Table on 10.50.4.1
Thu Oct 13 21:19:45 2016: netdbctl(5500): comwarescraper.pl(5536): |ERROR|: No ARP table data received from 10 (use netdbctl -debug 2 for more info)
Thu Oct 13 21:19:45 2016: netdbctl(5500): DEBUG: Bad ARP Table Data Received: display arp
Thu Oct 13 21:19:45 2016: netdbctl(5500): ^
Thu Oct 13 21:19:45 2016: netdbctl(5500): % Unrecognized command found at '^' position.
Thu Oct 13 21:19:45 2016: netdbctl(5500): <H3C>comwarescraper.pl(5536): Cleaning Trunk Data on 10.50.4.1
Thu Oct 13 21:19:45 2016: netdbctl(5500): Warning: Empty mac table passed to cleanTrunks
Thu Oct 13 21:19:45 2016: netdbctl(5500): comwarescraper.pl(5536): Writing Data to Disk on 10.50.4.1
my devicelist:
10.50.4.1,authgroup=group11,devtype=comware,netdbarp
Regards,
Julius.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Kindly ensure the local account used to login/run these commands have "level 3" authorization for Comware v5.2 or "user-role network-admin" for Comware v7.1.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi,
Anybody know how to config for H3C core switch? I am getting below:
comwarescraper.pl(5536): |Warning|: No mac-address table data received from 10: Use netdbctl -debug 3 or higher for more info, or disable mac-address tables on 10 in the devicelist.csv with nomac if mac table unsupported on this device.
Thu Oct 13 21:19:23 2016: netdbctl(5500): comwarescraper.pl(5536): Getting the Interface Status Table on 10.50.4.1
Thu Oct 13 21:19:24 2016: netdbctl(5500): iosscraper.pl(5529): Getting the Interface Descriptions on 10.54.0.5
Thu Oct 13 21:19:34 2016: netdbctl(5500): comwarescraper.pl(5536): Getting the ARP Table on 10.50.4.1
Thu Oct 13 21:19:45 2016: netdbctl(5500): comwarescraper.pl(5536): |ERROR|: No ARP table data received from 10 (use netdbctl -debug 2 for more info)
Thu Oct 13 21:19:45 2016: netdbctl(5500): DEBUG: Bad ARP Table Data Received: display arp
Thu Oct 13 21:19:45 2016: netdbctl(5500): ^
Thu Oct 13 21:19:45 2016: netdbctl(5500): % Unrecognized command found at '^' position.
Thu Oct 13 21:19:45 2016: netdbctl(5500): <H3C>comwarescraper.pl(5536): Cleaning Trunk Data on 10.50.4.1
Thu Oct 13 21:19:45 2016: netdbctl(5500): Warning: Empty mac table passed to cleanTrunks
Thu Oct 13 21:19:45 2016: netdbctl(5500): comwarescraper.pl(5536): Writing Data to Disk on 10.50.4.1
my devicelist:
10.50.4.1,authgroup=group11,devtype=comware,netdbarp
Regards,
Julius.
i think the issue is related to super mode. like enable in cisco.how to resolve it?
Hello Julius,
Kindly ensure the local account used to login/run these commands have "level 3" authorization for Comware v5.2 or "user-role network-admin" for Comware v7.1.
Thanks Christian,
Did according to your guide and issue resolved.