From: Derrick, S. <Sal...@su...> - 2006-03-17 13:11:09
|
It might be too late to avoid that. Kevin sent alpha code in Jan that worked fine for my purposes. Here's the email I received:=20 > >Hi everyone, > >Make sure you look at the "read-me" file ! =20 > >Current Build is >http://members.optushome.com.au/kdowns/NDoc2-Alpha3k-20060120.zip > > >Let me know how you get on; bug reports, comments and suggestions are always welcome :-) > > >regards, >Kevin =20 > Sally -----Original Message----- From: ndo...@li... [mailto:ndo...@li...] On Behalf Of David Kean Sent: Thursday, March 16, 2006 10:17 PM To: Paul Selormey; Jeremiah Voris Cc: ndo...@li...; ndo...@li... Subject: RE: [Ndoc-users] Ndoc for 2005 You might want to ping Kevin Downs (kdowns AT optusnet DOT com DOT au), as he is currently working up an update for 2.0 and you probably don't want to be duplicating effort. -----Original Message----- From: ndo...@li... [mailto:ndo...@li...] On Behalf Of Paul Selormey Sent: Thursday, 16 March 2006 7:49 PM To: Jeremiah Voris Cc: ndo...@li...; ndo...@li... Subject: Re: [Ndoc-users] Ndoc for 2005 Right, that is a very good idea. I am currently planning to start a project in VS.NET 2005 and will seriously need NDoc support. David Strickland, Ken Kohler also announced a similar update for the .NET 2 support. Please get together and merge these updates and upload it somewhere for us to test it, and start working with it. I believe the NDoc developers are currently busy, so for now a fork will not be bad. Best regards, Paul. Jeremiah Voris wrote: > On 3/16/06, Strickland,David <dst...@mn...> wrote: >> I have a buildable 2005 copy based off of 1.3v13. I spent the better part of >> the day today doing a simple port and reworking the Solution and project >> classes to support the new formats. Is there another project everyone has >> moved to already if not anyone got a suggestion where I can post this thing >> so we can start testing/hacking on it. Granted it's got more bugs then a new >> york slum and is probably about as Stable a democracy in Iraq but if no one >> else has anything it'll be a place to start. If needed we could always >> branch into a new SourceForge Project but that might be overkill and in the >> end do more harm to the community then good. >> >> Anyone care to comment? >=20 > Sounds like you and Ken Kohler need to get together and figure out an=20 > integration strategy. :) Has anyone contacted the project admins? >=20 > -- > 533777336444244 >=20 >=20 > ------------------------------------------------------- > This SF.Net email is sponsored by xPML, a groundbreaking scripting language > that extends applications into web and mobile media. Attend the live webcast > and join the prime developer group breaking into this new coding territory! > http://sel.as-us.falkag.net/sel?cmd=3Dk&kid=110944&bid$1720&dat=121642 > _______________________________________________ > Ndoc-users mailing list > Ndo...@li... > https://lists.sourceforge.net/lists/listinfo/ndoc-users ------------------------------------------------------- This SF.Net email is sponsored by xPML, a groundbreaking scripting language that extends applications into web and mobile media. Attend the live webcast and join the prime developer group breaking into this new coding territory! http://sel.as-us.falkag.net/sel?cmd=3Dlnk&kid=3D110944&bid=3D241720&dat=3D= 121642 _______________________________________________ Ndoc-users mailing list Ndo...@li... https://lists.sourceforge.net/lists/listinfo/ndoc-users ######################################################################## ############# Attention: The information contained in this message and or attachments is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of AusSoft Solutions Pty Ltd. If you received this in error, please inform us by email at pos...@au... and delete the material from any system. ######################################################################## ############# ------------------------------------------------------- This SF.Net email is sponsored by xPML, a groundbreaking scripting language that extends applications into web and mobile media. Attend the live webcast and join the prime developer group breaking into this new coding territory! http://sel.as-us.falkag.net/sel?cmd=3Dk&kid=110944&bid$1720&dat=121642 _______________________________________________ Ndoc-users mailing list Ndo...@li... https://lists.sourceforge.net/lists/listinfo/ndoc-users |
From: Ken K. <jun...@ya...> - 2006-03-17 19:31:55
|
Hi Everyone, As has been mentioned before, I have a working copy of NDoc 1.3.x that works with VS 2.0 and Generics. I started with ndoc-src-1.3.1-v13.zip, found at http://jonas.lagerblad.com/blog/?p=4, so I take no credit for getting NDoc to compile with VS 2005. 1.3.1-v13 is known to have 2 major issues: 1) Working links to system classes 2) Correct output of Generics for other languages than C# I worked only on the MSDN Documenter and ported my changes to the MSDN2 Documenter. I do not have the VSHIK and cannot find in on Microsoft's website, so I cannot compile the HtmlHelp documenter. The JavaDoc documenter gives a runtime error (stylesheet problem?) if it is used, I have not touched this one. The bulk of my changes are localized to additional files I added, or additional code and methods called by or surrounded by tests for user selection of .Net Framework 2.0 as the target. This limits the scope of changes to existing code to help preserve compatibility with 1.0 and 1.1 Framework help file generation. I changed only one XSLT file for MSDN (and thus one file for MSDN2). The big issues with fixing links to the MS-HELP urls (i.e. the framework help) are: 1) The SDK root has changed. The change is more than from 1.0 to 1.1 of the framework, which was just a version number update. The root is partially mapped based on the actual files that the help pages are stored in, of which there are about 20 files. To solve this, I created the url based on one of the files then verified (navigated to) the MS-HELP page. If the navigation failed, I tried the next file...and so on. This is the only way I could think of to resolve the base portion of the URL. 2) Generation of URL for Generics is difficult. For classes, I updated the corresponding stylesheet to call a utility method. At this point when generating the html page, there is enough information, if you count the parameters, to form the appropriate URL, though Enumerator, KeyCollection and ValueCollection derived classes needed additional work due to issues with reflection information not being correct. 3) MS-HELP links for members/properties/fields/etc. can be problamatic. The only effective way to get the correct URL appears to be navigate the the Member page for the corresponding class, then parse the page to find the actual link for the member/property/etc. This logic is so much easier than using reflection to try to determine what type of information needs to be used for the help link. 4) Some links for user generated code (generics?) do not appear that they ever can be correct. After all HTML files are generated (prior to creating the CHM file) the links are verified. Bad links to developer classes are removed. I only use C#, so I have not verified correctness with VB or any other language. I now have a utility that can scan the DOC directory created by NDoc to verify all links in the generated HTML files. With both the GenericsTest project and the src\Test project, which I updated for testing Generics, the generated documents DO NOT have any bad links with my updated code. If you want the updated Source Code, let me know and I will e-mail it. Ken --- "Derrick, Sally" <Sal...@su...> wrote: > It might be too late to avoid that. Kevin sent > alpha code in Jan that > worked fine for my purposes. > > Here's the email I received: > > > > >Hi everyone, > > > >Make sure you look at the "read-me" file ! > > > >Current Build is > >http://members.optushome.com.au/kdowns/NDoc2-Alpha3k-20060120.zip > > > > > >Let me know how you get on; bug reports, comments > and suggestions are > always welcome :-) > > > > > >regards, > >Kevin > > > > Sally > > -----Original Message----- > From: ndo...@li... > [mailto:ndo...@li...] On > Behalf Of David Kean > Sent: Thursday, March 16, 2006 10:17 PM > To: Paul Selormey; Jeremiah Voris > Cc: ndo...@li...; > ndo...@li... > Subject: RE: [Ndoc-users] Ndoc for 2005 > > You might want to ping Kevin Downs (kdowns AT > optusnet DOT com DOT au), > as he is currently working up an update for 2.0 and > you probably don't > want to be duplicating effort. > > > -----Original Message----- > From: ndo...@li... > [mailto:ndo...@li...] On > Behalf Of Paul > Selormey > Sent: Thursday, 16 March 2006 7:49 PM > To: Jeremiah Voris > Cc: ndo...@li...; > ndo...@li... > Subject: Re: [Ndoc-users] Ndoc for 2005 > > Right, that is a very good idea. I am currently > planning to start a > project in VS.NET 2005 and will seriously need NDoc > support. > > David Strickland, Ken Kohler also announced a > similar update for the > .NET 2 support. Please get together and merge these > updates and upload > it somewhere for us to test it, and start working > with it. I believe the > NDoc developers are currently busy, so for now a > fork will not be bad. > > Best regards, > Paul. > > Jeremiah Voris wrote: > > On 3/16/06, Strickland,David > <dst...@mn...> wrote: > >> I have a buildable 2005 copy based off of 1.3v13. > I spent the better > part of > >> the day today doing a simple port and reworking > the Solution and > project > >> classes to support the new formats. Is there > another project everyone > has > >> moved to already if not anyone got a suggestion > where I can post this > thing > >> so we can start testing/hacking on it. Granted > it's got more bugs > then a new > >> york slum and is probably about as Stable a > democracy in Iraq but if > no one > >> else has anything it'll be a place to start. If > needed we could > always > >> branch into a new SourceForge Project but that > might be overkill and > in the > >> end do more harm to the community then good. > >> > >> Anyone care to comment? > > > > Sounds like you and Ken Kohler need to get > together and figure out an > > integration strategy. :) Has anyone contacted the > project admins? > > > > -- > > 533777336444244 > > > > > > > ------------------------------------------------------- > > This SF.Net email is sponsored by xPML, a > groundbreaking scripting > language > > that extends applications into web and mobile > media. Attend the live > webcast > > and join the prime developer group breaking into > this new coding > territory! > > > http://sel.as-us.falkag.net/sel?cmd=k&kid0944&bid$1720&dat1642 > > _______________________________________________ > > Ndoc-users mailing list > > Ndo...@li... > > > https://lists.sourceforge.net/lists/listinfo/ndoc-users > > > ------------------------------------------------------- > This SF.Net email is sponsored by xPML, a > groundbreaking scripting > language that extends applications into web and > mobile media. Attend the > live webcast and join the prime developer group > breaking into this new > coding territory! > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642 > _______________________________________________ > Ndoc-users mailing list > Ndo...@li... > https://lists.sourceforge.net/lists/listinfo/ndoc-users > > ######################################################################## > ############# > Attention: > The information contained in this message and or > attachments is intended > only for the person or entity to which it is > addressed and may contain > confidential and/or privileged material. Any review, > retransmission, > dissemination or other use of, or taking of any > action in reliance upon, > this information by persons or entities other than > the intended > recipient is prohibited. Any views expressed in this > message are those > of the individual sender and may not necessarily > reflect the views of > AusSoft Solutions Pty Ltd. > If you received this in error, please inform us by > email at > pos...@au... and delete the material from > any system. > ######################################################################## > ############# > > > ------------------------------------------------------- > This SF.Net email is sponsored by xPML, a > groundbreaking scripting > language that extends applications into web and > mobile media. Attend the > live webcast and join the prime developer group > breaking into this new > coding territory! > http://sel.as-us.falkag.net/sel?cmd=k&kid0944&bid$1720&dat1642 > _______________________________________________ > Ndoc-users mailing list > Ndo...@li... > https://lists.sourceforge.net/lists/listinfo/ndoc-users > > > > ------------------------------------------------------- > This SF.Net email is sponsored by xPML, a > groundbreaking scripting language > that extends applications into web and mobile media. > Attend the live webcast > and join the prime developer group breaking into > this new coding territory! > http://sel.as-us.falkag.net/sel?cmd=lnk&kid0944&bid$1720&dat1642 > _______________________________________________ > Ndoc-users mailing list > Ndo...@li... > https://lists.sourceforge.net/lists/listinfo/ndoc-users > __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com |
From: Michael S. <mic...@mb...> - 2006-03-17 19:41:04
|
I will help get you the VSHIK: I had to download the VS2005 SDK and install it. Go here: http://msdn.microsoft.com/vstudio/extend/default.aspx and look for the October 2005 SDK. I don't know if the new March CTP has = the VS Help Authoring/Integration stuff. MS -----Original Message----- From: ndo...@li... [mailto:ndo...@li...] On Behalf Of Ken Kohler Sent: Friday, March 17, 2006 1:32 PM To: Derrick, Sally; David Kean; Paul Selormey; Jeremiah Voris; ndo...@li... Strickland,David; = kd...@op... Cc: ndo...@li...; ndo...@li... Subject: RE: [Ndoc-users] Ndoc for 2005 Hi Everyone, As has been mentioned before, I have a working copy of NDoc 1.3.x that works with VS 2.0 and Generics. I started with ndoc-src-1.3.1-v13.zip, found at http://jonas.lagerblad.com/blog/?p=3D4, so I take no credit for getting NDoc to compile with VS 2005. 1.3.1-v13 is known to have 2 major issues: 1) Working links to system classes 2) Correct output of Generics for other languages than C# I worked only on the MSDN Documenter and ported my changes to the MSDN2 Documenter. I do not have the VSHIK and cannot find in on Microsoft's website, so I cannot compile the HtmlHelp documenter. The JavaDoc documenter gives a runtime error (stylesheet problem?) if it is used, I have not touched this one. The bulk of my changes are localized to additional files I added, or additional code and methods called by or surrounded by tests for user selection of .Net Framework 2.0 as the target. This limits the scope of changes to existing code to help preserve compatibility with 1.0 and 1.1 Framework help file generation. I changed only one XSLT file for MSDN (and thus one file for MSDN2). The big issues with fixing links to the MS-HELP urls (i.e. the framework help) are:=20 1) The SDK root has changed. The change is more than from 1.0 to 1.1 of the framework, which was just a version number update. The root is partially mapped based on the actual files that the help pages are stored in, of which there are about 20 files. To solve this, I created the url based on one of the files then verified (navigated to) the MS-HELP page.=20 If the navigation failed, I tried the next file...and so on. This is the only way I could think of to resolve the base portion of the URL. 2) Generation of URL for Generics is difficult. For classes, I updated the corresponding stylesheet to call a utility method. At this point when generating the html page, there is enough information, if you count the parameters, to form the appropriate URL, though Enumerator, KeyCollection and ValueCollection derived classes needed additional work due to issues with reflection information not being correct. 3) MS-HELP links for members/properties/fields/etc. can be problamatic. The only effective way to get the correct URL appears to be navigate the the Member page for the corresponding class, then parse the page to find the actual link for the member/property/etc.=20 This logic is so much easier than using reflection to try to determine what type of information needs to be used for the help link. 4) Some links for user generated code (generics?) do not appear that they ever can be correct. After all HTML files are generated (prior to creating the CHM file) the links are verified. Bad links to developer classes are removed. I only use C#, so I have not verified correctness with VB or any other language. I now have a utility that can scan the DOC directory created by NDoc to verify all links in the generated HTML files. With both the GenericsTest project and the src\Test project, which I updated for testing Generics, the generated documents DO NOT have any bad links with my updated code. If you want the updated Source Code, let me know and I will e-mail it. Ken --- "Derrick, Sally" <Sal...@su...> wrote: > It might be too late to avoid that. Kevin sent > alpha code in Jan that > worked fine for my purposes. >=20 > Here's the email I received:=20 >=20 > > > >Hi everyone, > > > >Make sure you look at the "read-me" file ! =20 > > > >Current Build is > >http://members.optushome.com.au/kdowns/NDoc2-Alpha3k-20060120.zip > > > > > >Let me know how you get on; bug reports, comments > and suggestions are > always welcome :-) > > > > > >regards, > >Kevin =20 > > >=20 > Sally >=20 > -----Original Message----- > From: ndo...@li... > [mailto:ndo...@li...] On > Behalf Of David Kean > Sent: Thursday, March 16, 2006 10:17 PM > To: Paul Selormey; Jeremiah Voris > Cc: ndo...@li...; > ndo...@li... > Subject: RE: [Ndoc-users] Ndoc for 2005 >=20 > You might want to ping Kevin Downs (kdowns AT > optusnet DOT com DOT au), > as he is currently working up an update for 2.0 and > you probably don't > want to be duplicating effort. >=20 >=20 > -----Original Message----- > From: ndo...@li... > [mailto:ndo...@li...] On > Behalf Of Paul > Selormey > Sent: Thursday, 16 March 2006 7:49 PM > To: Jeremiah Voris > Cc: ndo...@li...; > ndo...@li... > Subject: Re: [Ndoc-users] Ndoc for 2005 >=20 > Right, that is a very good idea. I am currently > planning to start a > project in VS.NET 2005 and will seriously need NDoc > support. >=20 > David Strickland, Ken Kohler also announced a > similar update for the > .NET 2 support. Please get together and merge these > updates and upload > it somewhere for us to test it, and start working > with it. I believe the > NDoc developers are currently busy, so for now a > fork will not be bad. >=20 > Best regards, > Paul. >=20 > Jeremiah Voris wrote: > > On 3/16/06, Strickland,David > <dst...@mn...> wrote: > >> I have a buildable 2005 copy based off of 1.3v13. > I spent the better > part of > >> the day today doing a simple port and reworking > the Solution and > project > >> classes to support the new formats. Is there > another project everyone > has > >> moved to already if not anyone got a suggestion > where I can post this > thing > >> so we can start testing/hacking on it. Granted > it's got more bugs > then a new > >> york slum and is probably about as Stable a > democracy in Iraq but if > no one > >> else has anything it'll be a place to start. If > needed we could > always > >> branch into a new SourceForge Project but that > might be overkill and > in the > >> end do more harm to the community then good. > >> > >> Anyone care to comment? > >=20 > > Sounds like you and Ken Kohler need to get > together and figure out an=20 > > integration strategy. :) Has anyone contacted the > project admins? > >=20 > > -- > > 533777336444244 > >=20 > >=20 > > > ------------------------------------------------------- > > This SF.Net email is sponsored by xPML, a > groundbreaking scripting > language > > that extends applications into web and mobile > media. Attend the live > webcast > > and join the prime developer group breaking into > this new coding > territory! > > > http://sel.as-us.falkag.net/sel?cmd=3Dk&kid=110944&bid$1720&dat=121642 > > _______________________________________________ > > Ndoc-users mailing list > > Ndo...@li... > > > https://lists.sourceforge.net/lists/listinfo/ndoc-users >=20 >=20 > ------------------------------------------------------- > This SF.Net email is sponsored by xPML, a > groundbreaking scripting > language that extends applications into web and > mobile media. Attend the > live webcast and join the prime developer group > breaking into this new > coding territory! > http://sel.as-us.falkag.net/sel?cmd=3Dlnk&kid=3D110944&bid=3D241720&dat=3D= 121642 > _______________________________________________ > Ndoc-users mailing list > Ndo...@li... > https://lists.sourceforge.net/lists/listinfo/ndoc-users >=20 > ######################################################################## > ############# > Attention: > The information contained in this message and or > attachments is intended > only for the person or entity to which it is > addressed and may contain > confidential and/or privileged material. Any review, > retransmission, > dissemination or other use of, or taking of any > action in reliance upon, > this information by persons or entities other than > the intended > recipient is prohibited. Any views expressed in this > message are those > of the individual sender and may not necessarily > reflect the views of > AusSoft Solutions Pty Ltd. > If you received this in error, please inform us by > email at > pos...@au... and delete the material from > any system. > ######################################################################## > ############# >=20 >=20 > ------------------------------------------------------- > This SF.Net email is sponsored by xPML, a > groundbreaking scripting > language that extends applications into web and > mobile media. Attend the > live webcast and join the prime developer group > breaking into this new > coding territory! > http://sel.as-us.falkag.net/sel?cmd=3Dk&kid=110944&bid$1720&dat=121642 > _______________________________________________ > Ndoc-users mailing list > Ndo...@li... > https://lists.sourceforge.net/lists/listinfo/ndoc-users >=20 >=20 >=20 > ------------------------------------------------------- > This SF.Net email is sponsored by xPML, a > groundbreaking scripting language > that extends applications into web and mobile media. > Attend the live webcast > and join the prime developer group breaking into > this new coding territory! > http://sel.as-us.falkag.net/sel?cmd=3Dlnk&kid=110944&bid$1720&dat=121642 > _______________________________________________ > Ndoc-users mailing list > Ndo...@li... > https://lists.sourceforge.net/lists/listinfo/ndoc-users >=20 __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around=20 http://mail.yahoo.com=20 ------------------------------------------------------- This SF.Net email is sponsored by xPML, a groundbreaking scripting = language that extends applications into web and mobile media. Attend the live = webcast and join the prime developer group breaking into this new coding = territory! http://sel.as-us.falkag.net/sel?cmd=3Dlnk&kid=3D110944&bid=3D241720&dat=3D= 121642 _______________________________________________ Ndoc-users mailing list Ndo...@li... https://lists.sourceforge.net/lists/listinfo/ndoc-users |
From: Paul S. <pa...@to...> - 2006-03-18 04:03:45
|
Hello Sally, Thanks for the information. There is hope then. I did not apply for the beta testing when the Kevin asked because I was not doing .NET 2 then. Best regards, Paul.=20 > -----Original Message----- > From: Derrick, Sally [mailto:Sal...@su...]=20 > Sent: Friday, March 17, 2006 10:11 PM > To: David Kean; Paul Selormey; Jeremiah Voris > Cc: ndo...@li...; ndo...@li... > Subject: RE: [Ndoc-users] Ndoc for 2005 >=20 > It might be too late to avoid that. Kevin sent alpha code in=20 > Jan that worked fine for my purposes. >=20 > Here's the email I received:=20 >=20 > > > >Hi everyone, > > > >Make sure you look at the "read-me" file ! =20 > > > >Current Build is > >http://members.optushome.com.au/kdowns/NDoc2-Alpha3k-20060120.zip > > > > > >Let me know how you get on; bug reports, comments and suggestions are > always welcome :-) > > > > > >regards, > >Kevin > > >=20 > Sally >=20 > -----Original Message----- > From: ndo...@li... > [mailto:ndo...@li...] On Behalf Of=20 > David Kean > Sent: Thursday, March 16, 2006 10:17 PM > To: Paul Selormey; Jeremiah Voris > Cc: ndo...@li...; ndo...@li... > Subject: RE: [Ndoc-users] Ndoc for 2005 >=20 > You might want to ping Kevin Downs (kdowns AT optusnet DOT=20 > com DOT au), as he is currently working up an update for 2.0=20 > and you probably don't want to be duplicating effort. >=20 >=20 > -----Original Message----- > From: ndo...@li... > [mailto:ndo...@li...] On Behalf Of=20 > Paul Selormey > Sent: Thursday, 16 March 2006 7:49 PM > To: Jeremiah Voris > Cc: ndo...@li...; ndo...@li... > Subject: Re: [Ndoc-users] Ndoc for 2005 >=20 > Right, that is a very good idea. I am currently planning to=20 > start a project in VS.NET 2005 and will seriously need NDoc support. >=20 > David Strickland, Ken Kohler also announced a similar update=20 > for the .NET 2 support. Please get together and merge these=20 > updates and upload it somewhere for us to test it, and start=20 > working with it. I believe the NDoc developers are currently=20 > busy, so for now a fork will not be bad. >=20 > Best regards, > Paul. >=20 > Jeremiah Voris wrote: > > On 3/16/06, Strickland,David <dst...@mn...> wrote: > >> I have a buildable 2005 copy based off of 1.3v13. I spent=20 > the better > part of > >> the day today doing a simple port and reworking the Solution and > project > >> classes to support the new formats. Is there another=20 > project everyone > has > >> moved to already if not anyone got a suggestion where I=20 > can post this > thing > >> so we can start testing/hacking on it. Granted it's got more bugs > then a new > >> york slum and is probably about as Stable a democracy in=20 > Iraq but if > no one > >> else has anything it'll be a place to start. If needed we could > always > >> branch into a new SourceForge Project but that might be=20 > overkill and > in the > >> end do more harm to the community then good. > >> > >> Anyone care to comment? > >=20 > > Sounds like you and Ken Kohler need to get together and=20 > figure out an=20 > > integration strategy. :) Has anyone contacted the project admins? > >=20 > > -- > > 533777336444244 > >=20 > >=20 > > ------------------------------------------------------- > > This SF.Net email is sponsored by xPML, a groundbreaking scripting > language > > that extends applications into web and mobile media. Attend the live > webcast > > and join the prime developer group breaking into this new coding > territory! > > = http://sel.as-us.falkag.net/sel?cmd=3Dk&kid=110944&bid$1720&dat=121642 > > _______________________________________________ > > Ndoc-users mailing list > > Ndo...@li... > > https://lists.sourceforge.net/lists/listinfo/ndoc-users >=20 >=20 > ------------------------------------------------------- > This SF.Net email is sponsored by xPML, a groundbreaking=20 > scripting language that extends applications into web and=20 > mobile media. Attend the live webcast and join the prime=20 > developer group breaking into this new coding territory! > http://sel.as-us.falkag.net/sel?cmd=3Dlnk&kid=3D110944&bid=3D241720& > dat=3D121642 > _______________________________________________ > Ndoc-users mailing list > Ndo...@li... > https://lists.sourceforge.net/lists/listinfo/ndoc-users >=20 > ############################################################## > ########## > ############# > Attention: > The information contained in this message and or attachments=20 > is intended only for the person or entity to which it is=20 > addressed and may contain confidential and/or privileged=20 > material. Any review, retransmission, dissemination or other=20 > use of, or taking of any action in reliance upon, this=20 > information by persons or entities other than the intended=20 > recipient is prohibited. Any views expressed in this message=20 > are those of the individual sender and may not necessarily=20 > reflect the views of AusSoft Solutions Pty Ltd. > If you received this in error, please inform us by email at=20 > pos...@au... and delete the material from any system. > ############################################################## > ########## > ############# >=20 >=20 > ------------------------------------------------------- > This SF.Net email is sponsored by xPML, a groundbreaking=20 > scripting language that extends applications into web and=20 > mobile media. Attend the live webcast and join the prime=20 > developer group breaking into this new coding territory! > http://sel.as-us.falkag.net/sel?cmd=3Dk&kid=110944&bid$1720&dat=121642 > _______________________________________________ > Ndoc-users mailing list > Ndo...@li... > https://lists.sourceforge.net/lists/listinfo/ndoc-users >=20 >=20 |
From: Ken K. <jun...@ya...> - 2006-03-18 18:17:56
|
The below mentioned zip file does not contain the MSDN documenters. How would this solve the .NET 2.0 problems? None of the files in the zip are files that I updated with my effort. Ken --- "Derrick, Sally" <Sal...@su...> wrote: > It might be too late to avoid that. Kevin sent > alpha code in Jan that > worked fine for my purposes. > > Here's the email I received: > > > > >Hi everyone, > > > >Make sure you look at the "read-me" file ! > > > >Current Build is > >http://members.optushome.com.au/kdowns/NDoc2-Alpha3k-20060120.zip > > > > > >Let me know how you get on; bug reports, comments > and suggestions are > always welcome :-) > > > > > >regards, > >Kevin > > > > Sally > > -----Original Message----- > From: ndo...@li... > [mailto:ndo...@li...] On > Behalf Of David Kean > Sent: Thursday, March 16, 2006 10:17 PM > To: Paul Selormey; Jeremiah Voris > Cc: ndo...@li...; > ndo...@li... > Subject: RE: [Ndoc-users] Ndoc for 2005 > > You might want to ping Kevin Downs (kdowns AT > optusnet DOT com DOT au), > as he is currently working up an update for 2.0 and > you probably don't > want to be duplicating effort. > > > -----Original Message----- > From: ndo...@li... > [mailto:ndo...@li...] On > Behalf Of Paul > Selormey > Sent: Thursday, 16 March 2006 7:49 PM > To: Jeremiah Voris > Cc: ndo...@li...; > ndo...@li... > Subject: Re: [Ndoc-users] Ndoc for 2005 > > Right, that is a very good idea. I am currently > planning to start a > project in VS.NET 2005 and will seriously need NDoc > support. > > David Strickland, Ken Kohler also announced a > similar update for the > .NET 2 support. Please get together and merge these > updates and upload > it somewhere for us to test it, and start working > with it. I believe the > NDoc developers are currently busy, so for now a > fork will not be bad. > > Best regards, > Paul. > > Jeremiah Voris wrote: > > On 3/16/06, Strickland,David > <dst...@mn...> wrote: > >> I have a buildable 2005 copy based off of 1.3v13. > I spent the better > part of > >> the day today doing a simple port and reworking > the Solution and > project > >> classes to support the new formats. Is there > another project everyone > has > >> moved to already if not anyone got a suggestion > where I can post this > thing > >> so we can start testing/hacking on it. Granted > it's got more bugs > then a new > >> york slum and is probably about as Stable a > democracy in Iraq but if > no one > >> else has anything it'll be a place to start. If > needed we could > always > >> branch into a new SourceForge Project but that > might be overkill and > in the > >> end do more harm to the community then good. > >> > >> Anyone care to comment? > > > > Sounds like you and Ken Kohler need to get > together and figure out an > > integration strategy. :) Has anyone contacted the > project admins? > > > > -- > > 533777336444244 > > > > > > > ------------------------------------------------------- > > This SF.Net email is sponsored by xPML, a > groundbreaking scripting > language > > that extends applications into web and mobile > media. Attend the live > webcast > > and join the prime developer group breaking into > this new coding > territory! > > > http://sel.as-us.falkag.net/sel?cmd=k&kid0944&bid$1720&dat1642 > > _______________________________________________ > > Ndoc-users mailing list > > Ndo...@li... > > > https://lists.sourceforge.net/lists/listinfo/ndoc-users > > > ------------------------------------------------------- > This SF.Net email is sponsored by xPML, a > groundbreaking scripting > language that extends applications into web and > mobile media. Attend the > live webcast and join the prime developer group > breaking into this new > coding territory! > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642 > _______________________________________________ > Ndoc-users mailing list > Ndo...@li... > https://lists.sourceforge.net/lists/listinfo/ndoc-users > > ######################################################################## > ############# > Attention: > The information contained in this message and or > attachments is intended > only for the person or entity to which it is > addressed and may contain > confidential and/or privileged material. Any review, > retransmission, > dissemination or other use of, or taking of any > action in reliance upon, > this information by persons or entities other than > the intended > recipient is prohibited. Any views expressed in this > message are those > of the individual sender and may not necessarily > reflect the views of > AusSoft Solutions Pty Ltd. > If you received this in error, please inform us by > email at > pos...@au... and delete the material from > any system. > ######################################################################## > ############# > > > ------------------------------------------------------- > This SF.Net email is sponsored by xPML, a > groundbreaking scripting > language that extends applications into web and > mobile media. Attend the > live webcast and join the prime developer group > breaking into this new > coding territory! > http://sel.as-us.falkag.net/sel?cmd=k&kid0944&bid$1720&dat1642 > _______________________________________________ > Ndoc-users mailing list > Ndo...@li... > https://lists.sourceforge.net/lists/listinfo/ndoc-users > > > > ------------------------------------------------------- > This SF.Net email is sponsored by xPML, a > groundbreaking scripting language > that extends applications into web and mobile media. > Attend the live webcast > and join the prime developer group breaking into > this new coding territory! > http://sel.as-us.falkag.net/sel?cmd=lnk&kid0944&bid$1720&dat1642 > _______________________________________________ > ndoc-devel mailing list > ndo...@li... > https://lists.sourceforge.net/lists/listinfo/ndoc-devel > __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com |