From: Ray Van Dolson <rayvd@bl...> - 2008-11-27 06:11:37
Hi folks, running Fedora 10 with kernel 184.108.40.206-117. I have a
DWL-G650 Rev A1 PCMCIA card in this machine (which is an HP nc8000
laptop btw) whose chipset is not supported by prism54. As a result I'm
trying to get it working with ndiswrapper, but as of yet, having little
03:00.0 Network controller: Intersil Corporation ISL3890 [Prism GT/Prism Duette]/ISL3886 [Prism Javelin/Prism Xbow] (rev 01)
# lspci -n
03:00.0 0280: 1260:3890 (rev 01)
I'm using dwlg650A1_drivers_108.zip from:
Installed things via the following steps:
1. Made sure no prism54 modules were still loaded.
2. Extracted windows driver.
3. Executed ndiswrapper -i PRISMNIC.inf
# ndiswrapper -l
prismnic : driver installed
device (1260:3890) present (alternate driver: p54pci)
5. Attempted to load driver:
# modprobe ndiswrapper
ndiswrapper version 1.53 loaded (smp=yes, preempt=no)
ndiswrapper: driver prismnic (D-Link,12/04/2002, 1.0.5) loaded
ndiswrapper 0000:03:00.0: PCI INT A -> Link[C0C5] -> GSI 10 (level, low) -> IRQ 10
ndiswrapper: using IRQ 10
ndiswrapper (NdisWriteErrorLogEntry:190): log: C000138A, count: 1, return_address: f9429757
ndiswrapper (NdisWriteErrorLogEntry:193): code: 0x502
ndiswrapper (mp_init:219): couldn't initialize device: C0000001
ndiswrapper (pnp_start_device:435): Windows driver couldn't initialize the device (C0000001)
ndiswrapper (mp_halt:262): device f6bba480 is not initialized - not halting
ndiswrapper: device eth%d removed
ndiswrapper 0000:03:00.0: PCI INT A disabled
ndiswrapper: probe of 0000:03:00.0 failed with error -22
usbcore: registered new interface driver ndiswrapper
I've tried a couple other versions of the driver.. 1.07 and 1.03 in
that directory as well as trying the .sys file that's in the WINXP
subdirectory of the driver (not sure how it differs from the .sys file
in the main directory). No go...
Anyone have any ideas of what I should try next or why this isn't
I have confirmed the card works fine on this machine in Windows...
From: Pavel Roskin <proski@gn...> - 2008-12-03 17:45:43
On Wed, 2008-11-26 at 21:44 -0800, Ray Van Dolson wrote:
> Hi folks, running Fedora 10 with kernel 220.127.116.11-117. I have a
> DWL-G650 Rev A1 PCMCIA card in this machine (which is an HP nc8000
> laptop btw) whose chipset is not supported by prism54.
Please try the other driver, p54. If you have any problems, report them
to linux-wireless@... with lspci data for the card.
> ndiswrapper (NdisWriteErrorLogEntry:190): log: C000138A, count: 1, return_address: f9429757
> ndiswrapper (NdisWriteErrorLogEntry:193): code: 0x502
> ndiswrapper (mp_init:219): couldn't initialize device: C0000001
The errors must be from the Windows driver, so it's quite hard to fix.