TomasL - 2006-05-28

Dear group.
I guess this has been asked before, but I can't find any conclusive answers.

Using FC4 with 2.6.16-1.2108_FC4 kernel, compiled for 8k stack.
With a D-Link DWL-G630 Rev E1 PCMIA/Cardbus-card. This card uses RaLink RT61 chipset.
Downloaded the latest driver from D-Link and from RaLinktech.

Ndiswrapper compiled OK without any errors, loaded the driver without any errors and the module loaded w/o any problem.

But I can't set mode nor can I set ESSID.

When I try "iwconfig ra0 key open" I get the response:

'Error for wireless request "Set Encode" (8b2a):
SET failed on device ra0; Invalid Argument.'

If I do a "iwpriv ra0"

I get the following:
Ndis_reset (8BF0)
Power_profile (8BF1)
Network_type (8BF2)
Usb_reset (8BF3)
Media_stream (8BF4)
Set_encr_mode (8BF5)
Set_auth_mode (8BF6)

Does this mean that I have missed something when I compiled the driver, Or is it something else that is playing with me.

Anyone that can share some ideas.

With best regards

Tomas Larsson