DEBUG make is further down......... [root@localhost ndiswrapper-1.0rc3]# make install make -C driver install make[1]: Entering directory `/home/chris/ndiswrapper-1.0rc3/driver' Makefile:54: CONFIG_DEBUG_SPINLOCK conflicts with spinlocks used by Windows driv er. There is a workaround for it in ndiswrapper, but it may not work correctly. Don't complain about kernel crashes until CONFIG_DEBUG_SPINLOCK is disabled. make -C /lib/modules/2.6.10-1.741_FC3/build SUBDIRS=/home/chris/ndiswrapper-1.0r c3/driver \ NDISWRAPPER_VERSION=1.0rc3 \ EXTRA_VERSION= modules make[2]: Entering directory `/lib/modules/2.6.10-1.741_FC3/build' /home/chris/ndiswrapper-1.0rc3/driver/Makefile:54: CONFIG_DEBUG_SPINLOCK conflic ts with spinlocks used by Windows driver. There is a workaround for it in ndiswr apper, but it may not work correctly. Don't complain about kernel crashes until CONFIG_DEBUG_SPINLOCK is disabled. CC [M] /home/chris/ndiswrapper-1.0rc3/driver/hal.o CC [M] /home/chris/ndiswrapper-1.0rc3/driver/iw_ndis.o CC [M] /home/chris/ndiswrapper-1.0rc3/driver/loader.o CC [M] /home/chris/ndiswrapper-1.0rc3/driver/misc_funcs.o CC [M] /home/chris/ndiswrapper-1.0rc3/driver/ndis.o CC [M] /home/chris/ndiswrapper-1.0rc3/driver/ntoskernel.o CC [M] /home/chris/ndiswrapper-1.0rc3/driver/pe_linker.o CC [M] /home/chris/ndiswrapper-1.0rc3/driver/proc.o CC [M] /home/chris/ndiswrapper-1.0rc3/driver/wrapper.o CC [M] /home/chris/ndiswrapper-1.0rc3/driver/usb.o CC [M] /home/chris/ndiswrapper-1.0rc3/driver/divdi3.o LD [M] /home/chris/ndiswrapper-1.0rc3/driver/ndiswrapper.o Building modules, stage 2. MODPOST CC /home/chris/ndiswrapper-1.0rc3/driver/ndiswrapper.mod.o LD [M] /home/chris/ndiswrapper-1.0rc3/driver/ndiswrapper.ko make[2]: Leaving directory `/lib/modules/2.6.10-1.741_FC3/build' *** WARNING: Kernel is compiled with 4K stack size option (CONFIG_4KSTACKS); ma ny Windows drivers will not work with this option enabled. Disable CONFIG_4KSTAC KS option, recompile and install kernel mkdir -p /lib/modules/2.6.10-1.741_FC3/misc install -m 0644 ndiswrapper.ko /lib/modules/2.6.10-1.741_FC3/misc /sbin/depmod -a make[1]: Leaving directory `/home/chris/ndiswrapper-1.0rc3/driver' make -C utils install make[1]: Entering directory `/home/chris/ndiswrapper-1.0rc3/utils' cc -Wall -g -DNDISWRAPPER_VERSION=\"1.0rc3\" -c -o loadndisdriver.o loadndisd river.c gcc -o loadndisdriver loadndisdriver.o install -D -m 755 loadndisdriver /sbin/loadndisdriver install -D -m 755 ndiswrapper /usr/sbin/ndiswrapper install -D -m 755 ndiswrapper-buginfo /usr/sbin/ndiswrapper-buginfo NOTE: Windows driver configuration file format has changed since 1.0-rc2. You mu st re-install Windows drivers if they were installed before. make[1]: Leaving directory `/home/chris/ndiswrapper-1.0rc3/utils' mkdir -p -m 0755 /usr/share/man/man8 install -m 644 ndiswrapper.8 /usr/share/man/man8 [root@localhost ndiswrapper-1.0rc3]# /usr/sbin/ndiswrapper -l ls: /etc/ndiswrapper: No such file or directory No drivers installed [root@localhost ndiswrapper-1.0rc3]# /usr/sbin/ndiswrapper -i /home/chris/BComDrv/bcmwl5.inf ls: /etc/ndiswrapper: No such file or directory Installing bcmwl5 Forcing parameter IBSSGMode|0 to IBSSGMode|2 Forcing parameter IBSSGMode|0 to IBSSGMode|2 [root@localhost ndiswrapper-1.0rc3]# /sbin/modprobe ndiswrapper FATAL: Error inserting ndiswrapper (/lib/modules/2.6.10-1.741_FC3/misc/ndiswrapper.ko): Unknown symbol in module, or unknown parameter (see dmesg) [root@localhost ndiswrapper-1.0rc3]# dmesg Linux version 2.6.10-1.741_FC3 (bhcompile@porky.build.redhat.com) (gcc version 3.4.2 20041017 (Red Hat 3.4.2-6.fc3)) #1 Thu Jan 13 16:38:22 EST 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009d800 (usable) BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fffc000 (usable) BIOS-e820: 000000001fffc000 - 000000001ffff000 (ACPI data) BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 511MB LOWMEM available. On node 0 totalpages: 131068 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 126972 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. ACPI: RSDP (v000 ASUS ) @ 0x000f62a0 ACPI: RSDT (v001 ASUS A7V600 0x42302e31 MSFT 0x31313031) @ 0x1fffc000 ACPI: FADT (v001 ASUS A7V600 0x42302e31 MSFT 0x31313031) @ 0x1fffc0b2 ACPI: BOOT (v001 ASUS A7V600 0x42302e31 MSFT 0x31313031) @ 0x1fffc030 ACPI: MADT (v001 ASUS A7V600 0x42302e31 MSFT 0x31313031) @ 0x1fffc058 ACPI: DSDT (v001 ASUS A7V600 0x00001000 MSFT 0x0100000b) @ 0x00000000 ACPI: PM-Timer IO Port: 0xe408 Built 1 zonelists Kernel command line: ro root=LABEL=/ rhgb quiet Initializing CPU#0 CPU 0 irqstacks, hard=c03cb000 soft=c03ca000 PID hash table entries: 2048 (order: 11, 32768 bytes) Detected 1834.274 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 515032k/524272k available (2011k kernel code, 8620k reserved, 653k data, 164k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 3629.05 BogoMIPS (lpj=1814528) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: After all inits, caps: 0383f3ff c1c3fbff 00000000 00000020 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD Athlon(TM) XP 2500+ stepping 00 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. ACPI: setting ELCR to 0200 (from 0e00) checking if image is initramfs... it is Freeing initrd memory: 474k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xf1970, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20041105 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11 12) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12) *15, disabled. ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Via IRQ fixup ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 15 devices usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing ** PCI interrupts are no longer routed automatically. If this ** causes a device to stop working, it is probably because the ** driver failed to call pci_enable_device(). As a temporary ** workaround, the "pci=routeirq" argument restores the old ** behavior. If this argument makes the device work again, ** please email the output of "lspci" to bjorn.helgaas@hp.com ** so I can fix the driver. pnp: 00:01: ioport range 0xe400-0xe47f could not be reserved pnp: 00:01: ioport range 0xe800-0xe81f has been reserved pnp: 00:0e: ioport range 0x290-0x297 has been reserved pnp: 00:0e: ioport range 0x370-0x375 has been reserved Simple Boot Flag at 0x3a set to 0x1 apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: overridden by ACPI. audit: initializing netlink socket (disabled) audit(1106143228.645:0): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key 613E889161DD0D7B - User ID: Red Hat, Inc. (Kernel Module GPG key) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12 Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected VIA KT400/KT400A/KT600 chipset agpgart: Maximum main memory to use for agp memory: 439M agpgart: AGP aperture is 64M @ 0xf8000000 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 76 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize divert: not allocating divert_blk for non-ethernet device lo Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:0f.1 ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 9 PCI: setting IRQ 9 as level-triggered ACPI: PCI interrupt 0000:00:0f.1[A] -> GSI 9 (level, low) -> IRQ 9 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 ide0: BM-DMA at 0xa800-0xa807, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xa808-0xa80f, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... hda: OPTORITECOMBO DC4801, ATAPI CD/DVD-ROM drive hdb: _NEC DVD_RW ND-3500AG, ATAPI CD/DVD-ROM drive elevator: using anticipatory as default io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... Probing IDE interface ide1... hda: ATAPI 48X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 hdb: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on isa0060/serio0 input: ImPS/2 Generic Wheel Mouse on isa0060/serio1 md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 1024 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 9362) Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 ACPI wakeup devices: PCI0 PCI1 USB0 USB1 USB2 USB3 SU20 MC97 ACPI: (supports S0 S1 S4 S5) Freeing unused kernel memory: 164k freed SCSI subsystem initialized libata version 1.10 loaded. sata_via version 1.0 ACPI: PCI interrupt 0000:00:0f.0[A] -> GSI 9 (level, low) -> IRQ 9 sata_via(0000:00:0f.0): routed to hard irq line 9 ata1: SATA max UDMA/133 cmd 0xD800 ctl 0xD402 bmdma 0xB400 irq 9 ata2: SATA max UDMA/133 cmd 0xD000 ctl 0xB802 bmdma 0xB408 irq 9 ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003 88:407f ata1: dev 0 ATA, max UDMA/133, 234441648 sectors: lba48 ata1: dev 0 configured for UDMA/133 scsi0 : sata_via ata2: no device found (phy stat 00000000) scsi1 : sata_via Vendor: ATA Model: ST3120026AS Rev: 3.05 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB) SCSI device sda: drive cache: write back SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 ndiswrapper: disagrees about version of symbol struct_module PCI: Enabling device 0000:00:13.0 (0004 -> 0005) ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI interrupt 0000:00:13.0[A] -> GSI 11 (level, low) -> IRQ 11 PCI: Enabling device 0000:00:13.1 (0004 -> 0005) gameport: pci0000:00:13.1 speed 1242 kHz ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI interrupt 0000:00:10.4[C] -> GSI 10 (level, low) -> IRQ 10 ehci_hcd 0000:00:10.4: EHCI Host Controller ehci_hcd 0000:00:10.4: irq 10, pci mem 0xf1000000 ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:10.4: USB 2.0 initialized, EHCI 1.00, driver 26 Oct 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected USB Universal Host Controller Interface driver v2.2 ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 9 (level, low) -> IRQ 9 uhci_hcd 0000:00:10.0: UHCI Host Controller uhci_hcd 0000:00:10.0: irq 9, io base 0xa400 uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:10.1[A] -> GSI 9 (level, low) -> IRQ 9 uhci_hcd 0000:00:10.1: UHCI Host Controller uhci_hcd 0000:00:10.1: irq 9, io base 0xa000 uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt Link [LNKF] BIOS reported IRQ 0, using IRQ 11 ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:10.2[B] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:10.2: UHCI Host Controller uhci_hcd 0000:00:10.2: irq 11, io base 0x9800 uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:10.3[B] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:10.3: UHCI Host Controller uhci_hcd 0000:00:10.3: irq 11, io base 0x9400 uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET: Registered protocol family 10 Disabled Privacy Extensions on device c0360800(lo) IPv6 over IPv4 tunneling driver divert: not allocating divert_blk for non-ethernet device sit0 ACPI: Power Button (FF) [PWRF] ibm_acpi: ec object not found EXT3 FS on sda2, internal journal device-mapper: 4.3.0-ioctl (2004-09-30) initialised: dm-devel@redhat.com Adding 1084376k swap on /dev/sda3. Priority:-1 extents:1 parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] Trying to free free DMA3 pnp: Device 00:08 disabled. ieee1394: Initialized config rom entry `ip1394' ndiswrapper: disagrees about version of symbol struct_module ip_tables: (C) 2000-2002 Netfilter core team ndiswrapper: disagrees about version of symbol struct_module pnp: Device 00:08 activated. parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] lp0: using parport0 (interrupt-driven). lp0: console ready ndiswrapper: Unknown parameter `' [root@localhost chris]# uname -r 2.6.10-1.741_FC3 [root@localhost chris]# /sbin/lspci 00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP] Host Bridge (rev 80) 00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge 00:0a.0 VGA compatible controller: nVidia Corporation NV17 [GeForce4 MX 420] (rev a3) 00:0d.0 Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 02) 00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80) 00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) 00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) 00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) 00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) 00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) 00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) 00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800 South] 00:13.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 0a) 00:13.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 0a) [root@localhost chris]# /sbin/ifconfig lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1595 errors:0 dropped:0 overruns:0 frame:0 TX packets:1595 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1839802 (1.7 MiB) TX bytes:1839802 (1.7 MiB) [root@localhost chris]# /sbin/iwconfig lo no wireless extensions. sit0 no wireless extensions. [root@localhost chris]# ========now remaking with DEBUG=3 as requested============ [root@localhost ndiswrapper-1.0rc3]# make DEBUG=3 make -C driver make[1]: Entering directory `/home/chris/ndiswrapper-1.0rc3/driver' Makefile:54: CONFIG_DEBUG_SPINLOCK conflicts with spinlocks used by Windows driver. There is a workaround for it in ndiswrapper, but it may not work correctly. Don't complain about kernel crashes until CONFIG_DEBUG_SPINLOCK is disabled. make -C /lib/modules/2.6.10-1.741_FC3/build SUBDIRS=/home/chris/ndiswrapper-1.0rc3/driver \ NDISWRAPPER_VERSION=1.0rc3 \ EXTRA_VERSION= modules make[2]: Entering directory `/lib/modules/2.6.10-1.741_FC3/build' /home/chris/ndiswrapper-1.0rc3/driver/Makefile:54: CONFIG_DEBUG_SPINLOCK conflicts with spinlocks used by Windows driver. There is a workaround for it in ndiswrapper, but it may not work correctly. Don't complain about kernel crashes until CONFIG_DEBUG_SPINLOCK is disabled. CC [M] /home/chris/ndiswrapper-1.0rc3/driver/hal.o CC [M] /home/chris/ndiswrapper-1.0rc3/driver/iw_ndis.o CC [M] /home/chris/ndiswrapper-1.0rc3/driver/loader.o CC [M] /home/chris/ndiswrapper-1.0rc3/driver/misc_funcs.o CC [M] /home/chris/ndiswrapper-1.0rc3/driver/ndis.o CC [M] /home/chris/ndiswrapper-1.0rc3/driver/ntoskernel.o CC [M] /home/chris/ndiswrapper-1.0rc3/driver/pe_linker.o CC [M] /home/chris/ndiswrapper-1.0rc3/driver/proc.o CC [M] /home/chris/ndiswrapper-1.0rc3/driver/wrapper.o CC [M] /home/chris/ndiswrapper-1.0rc3/driver/usb.o CC [M] /home/chris/ndiswrapper-1.0rc3/driver/divdi3.o LD [M] /home/chris/ndiswrapper-1.0rc3/driver/ndiswrapper.o Building modules, stage 2. MODPOST LD [M] /home/chris/ndiswrapper-1.0rc3/driver/ndiswrapper.ko make[2]: Leaving directory `/lib/modules/2.6.10-1.741_FC3/build' *** WARNING: Kernel is compiled with 4K stack size option (CONFIG_4KSTACKS); many Windows drivers will not work with this option enabled. Disable CONFIG_4KSTACKS option, recompile and install kernel make[1]: Leaving directory `/home/chris/ndiswrapper-1.0rc3/driver' make -C utils make[1]: Entering directory `/home/chris/ndiswrapper-1.0rc3/utils' make[1]: Nothing to be done for `all'. make[1]: Leaving directory `/home/chris/ndiswrapper-1.0rc3/utils' [root@localhost ndiswrapper-1.0rc3]# /usr/sbin/ndiswrapper -l Installed ndis drivers: bcmwl5 driver present, hardware present [root@localhost ndiswrapper-1.0rc3]# /usr/sbin/ndiswrapper -e bcmwl5 [root@localhost ndiswrapper-1.0rc3]# /usr/sbin/ndiswrapper -l No drivers installed [root@localhost ndiswrapper-1.0rc3]# /usr/sbin/ndiswrapper -i /home/chris/BComDrv/bcmwl5.inf Installing bcmwl5 Forcing parameter IBSSGMode|0 to IBSSGMode|2 Forcing parameter IBSSGMode|0 to IBSSGMode|2 [root@localhost ndiswrapper-1.0rc3]# /sbin/modprobe ndiswrapper FATAL: Error inserting ndiswrapper (/lib/modules/2.6.10-1.741_FC3/misc/ndiswrapper.ko): Unknown symbol in module, or unknown parameter (see dmesg) dmesg output as follows: ndiswrapper: Unknown parameter `' ===========end===========