ncpl-user — NCPL user support and discussion mailing list

[ncpl-user] New install - admin user's password?

[Dan M. <ca...@gm...>]

I just finished installing ncpl on a RedHat box, and I'm trying to get it
set up for use. I can get the ncpl login page, but when I try to log in as
"admin" with password "admin" I keeping getting sent back to the login
page. Is the initial admin password something other than "admin"?

i tried looking through the perl code to figure out how the plaintext
password gets converted to the form that gets written to the database so
that I could change the pw to something known, but I haven't found that
code yet.

-- 
--------------------------
Dan Mahoney
ca...@gm...

"How you behave towards cats here below determines your status in Heaven."
Robert Heinlein

"There are two means of refuge from the miseries of
life - music and cats" - Albert Schweitzer

Re: [ncpl-user] (no subject)

[Yves V. d. H. <yv...@us...>]

Hi,


NCPL currenlty only supports SSH connection, but it's a feature on my todo.


Kind regards,

Yves



-----Original Message-----
From: Mauro Perez [mailto:mau...@ac...]
Sent: vrijdag 20 november 2009 20:18
To: ncp...@li...
Subject:



I want to use NCPL from the same server where Nagios is install. Is there

some way to not use ssh connection?

Thaks in advance

Mauro Perez















Mauro Perez D.

Tecnologia.

* Phone: +54 (11) 4322 - 9966  int. 124

* Movil  : 1157664843

* Dirección: Av. Corrientes 569 - 7º Piso

Buenos Aires, Argentina

Web    : www.accusys.com.ar <http://www.accusys.com.ar/>

Mail to: mau...@ac...

<mailto:ale...@ac...>

Re: [ncpl-user] Release of Nagios 3.0

[Jeff S. - D. T. <jef...@de...>]

Is there a timeline on when you will be releasing a version to support
Nagios 3.0.  If you need some help with development on supporting Nagios
3.0 I am willing to volunteer some time.

Thank you,
Jeff

-----Original Message-----
From: ncp...@li...
[mailto:ncp...@li...] On Behalf Of Jeff
Shumard - DefenseWeb Technologies
Sent: Thursday, March 13, 2008 9:25 AM
To: ncp...@li...
Subject: [ncpl-user] Release of Nagios 3.0

I know if was just released as stable but are you planning on supporting
Nagios 3.0?  If you are do you have a timeline on when you will?

Thank you,
Jeff Shumard

------------------------------------------------------------------------
-
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
ncpl-user mailing list
ncp...@li...
https://lists.sourceforge.net/lists/listinfo/ncpl-user

[ncpl-user] Couple Of Feature Requests.

[Jeff S. - D. T. <jef...@de...>]

Here are a couple of feature requests if you can put them in a future
revision.

1)  We want to turn authentication off in the program because we
authenticate all our web Interfaces with the Apache Kerberos module off
of our Active directory Servers.  We don't want to have a separate
username and password for all our Nagios Admins in the program.

2)  When making a lot of changes on the Nagios server.  It is not very
user friendly trying to move around.  Once you go into modify services
or hosts or what ever.  There is not link to get back to the main
screen.  You need to just keep hitting back on your browser.  There
should be a link to take you back to the main page with out having to
log back in again.

Do you have a date on when you will have the software ready to support
Nagios 3?

Thank you,
Jeff


--------------------------------------------
Jeff Shumard
UNIX Administrator
 
DefenseWeb Technologies, Inc.
4150 Mission Blvd., Suite 220
San Diego, CA 92109

Office:   858-272-8505
Direct:   858-882-5820
Mobile:   619-997-5560
Fax:      858-228-3667
 
Email:    jef...@de...
WWW:      www.defenseweb.com

----------------------------------
NOTICE: This email message is for the sole use of the intended
recipient(s) and may contain confidential and privileged information.
Any unauthorized review, use, disclosure or distribution is prohibited. 
If you are not the intended recipient, please contact the sender by
reply
email and destroy all copies of the original message.

To contact our email administrator directly, send to
pos...@de....
----------------------------------

Re: [ncpl-user] FW: Issues with NCPL v1.000.050.

[Yves V. d. H. <yv...@us...>]

Hi Jeff,

I just released version 1.000.051.

This release fixes:
- issue 1
- issue 2
- issue 3
- issue 4

The fields mentioned in issue 5-8 are nagios version 3 related, I will
release an other version to fix this.

Kind regards,
Yves


-----Original Message-----
> From: ncp...@li...
> [mailto:ncp...@li...] On Behalf Of Jeff Shumard
> -
> DefenseWeb Technologies
> Sent: dinsdag 4 maart 2008 22:45
> To: ncp...@li...
> Subject: [ncpl-user] Issues with NCPL v1.00.050.
>
> There were some issues that I was having with the new software.  I also
> have a feature request for future versions.
>
> Feature Requests:
> 1)  For settings with set options like with logging you should probably
> use a drop down menue instead of a text field.
>
> I had to fix a couple of things in order for the nagios.cfg to work
> properly. Just wanted to make sure you were aware of these problems.
>
> Issues with nagios.cfg:
> 1) sleep_time needs to be decimal in the database.
>         Cange the type from int to decimal in nagios_nagios table.
>                 alter table nagios_nagios change sleep_time sleep_time
> DECIMAL(10,2) unsigned;
> 2) You have eventhandler_timeout when it needs to be
> event_handler_timeout.
>         Change everything in nagios.pl from eventhandler_timeout to
> event_handler_timeout.
>         Change everything in Export.pm from eventhandler_timeout to
> event_handler_timeout.
>         Change everything in Import.pm from eventhandler_timeout to
> event_handler_timeout.
>         Change column name in nagios_nagios to event_handler_timeout.
>                 alter table nagios_nagios change event_handler_timeout
> event_handler_timeout int(10) unsigned;
> 3) You have oscp_timeout when it needs to be ocsp_timeout.
>         Change everything in nagios.pl from oscp_timeout to
> ocsp_timeout.
>         Change everything in Export.pm from oscp_timeout to
> ocsp_timeout.
>         Change everything in Import.pm from oscp_timeout to
> ocsp_timeout.
>         Change column name in nagios_nagios to ocsp_timeout.
>                 alter table nagios_nagios change oscp_timeout
> ocsp_timeout int(10) unsigned;
> 4) You have host_fresshness_check_interval when it needs to be
> host_freshness_check_interval.
>         Change everything in nagios.pl from
> host_fresshness_check_interval to host_freshness_check_interval.
>         Change everything in Export.pm from
> host_fresshness_check_interval to host_freshness_check_interval.
>         Change everything in Import.pm from
> host_fresshness_check_interval to host_freshness_check_interval.
>         Change column name in nagios_nagios to
> host_freshness_check_interval.
>                 alter table nagios_nagios change
> host_fresshness_check_interval host_freshness_check_interval int(10)
> unsigned;
> 5) You didn't include event_broker_options.
>         Added event_broker_options to nagios.pl
>                 my $event_broker_options                      = (defined
> $cgi->param('event_broker_options'))                      ?
> $cgi->param('event_broker_options')                      : '';
>
> `event_broker_options`=@{[$dbh->quote($event_broker_options)]},
>                 $event_broker_options = $ref->{"event_broker_options"};
>                 html_textbox("event_broker_options",
> "event_broker_options:", "general", 50, $event_broker_options, '', '',
> '', 0, $action, $debug);
>         Added event_broker_options to Export.pm.
>                 print $CFG
> "event_broker_options=$hash_ref->{event_broker_options}\n" if (defined
> $hash_ref->{event_broker_options} && $hash_ref->{event_broker_options}
> ne '');
>         Added event_broker_options to Import.pm.
>                 `event_broker_options`=@{[$dbh->quote($configHash->{
> event_broker_options })]},
>         Added column  to nagios_nagios table.
>                 alter table nagios_nagios add event_broker_options
> varchar(255) after enable_event_handlers;
> 6) You didn't include broker_module.
>         Added broker_module to nagios.pl.
>                 my $broker_module                             = (defined
> $cgi->param('broker_module'))                             ?
> $cgi->param('broker_module')                             : '';
>                 `broker_module`=@{[$dbh->quote($broker_module)]},
>                 $broker_module = $ref->{"broker_module"};
>                 html_textbox("broker_module", "broker_module:",
> "general", 50, $broker_module, '', '', '', 0, $action, $debug);
>         Added broker_module to Export.pm.
>                 print $CFG "broker_module=$hash_ref->{broker_module}\n"
> if (defined $hash_ref->{broker_module} && $hash_ref->{broker_module} ne
> '');
>         Added broker_module to Import.pm.
>                 `broker_module`=@{[$dbh->quote($configHash->{
> broker_module })]},
>         Added column to nagios_nagios table.
>                 alter table nagios_nagios add broker_module varchar(255)
> after event_broker_options;
> 7) You didn't include p1_file
>         Added p1_file to nagios.pl
>                 my $p1_file                                   = (defined
> $cgi->param('p1_file'))                                   ?
> $cgi->param('p1_file')                                   : '';
>                 `p1_file`=@{[$dbh->quote($p1_file)]},
>                 $p1_file = $ref->{"p1_file"};
>                 html_textbox("p1_file", "p1_file:", "general", 50,
> $p1_file, '', '', '', 0, $action, $debug);
>         Added p1_file to Export.pm.
>                 print $CFG "p1_file=$hash_ref->{p1_file}\n" if (defined
> $hash_ref->{p1_file} && $hash_ref->{p1_file} ne '');
>         Added p1_file to Import.pm.
>                 `p1_file`=@{[$dbh->quote($configHash->{ p1_file })]},
>         Added column to nagios_nagios table.
>                 alter table nagios_nagios add p1_file varchar(255) after
> status_file;
> 8) You didn't include daemon_dumps_core.
>         Added daemon_dumps_core to nagios.pl
>                 my $daemon_dumps_core                         = (defined
> $cgi->param('daemon_dumps_core'))                         ?
> $cgi->param('daemon_dumps_core')                         : 0;
>
> `daemon_dumps_core`=@{[$dbh->quote($daemon_dumps_core)]},
>                 $daemon_dumps_core = $ref->{"daemon_dumps_core"};
>                 html_enabledbox("daemon_dumps_core",
> "daemon_dumps_core:", "general", $daemon_dumps_core, '', '', '', 0,
> $action, $debug);
>         Added daemon_dumps_core to Export.pm
>                 print $CFG
> "daemon_dumps_core=$hash_ref->{daemon_dumps_core}\n" if (defined
> $hash_ref->{daemon_dumps_core} && $hash_ref->{daemon_dumps_core} =~
> /[01]/);
>         Added daemon_dumps_core to to Import.pm
>                 `daemon_dumps_core`=@{[$dbh->quote($configHash->{
> daemon_dumps_core })]},
>         Added column to nagios_nagios table.
>                 alter table nagios_nagios add daemon_dumps_core
> tinyint(1) unsigned DEFAULT 0 after admin_pager;
>
> Thank you,
> Jeff Shumard
>
> --------------------------------------------
> Jeff Shumard
> UNIX Administrator
>
> DefenseWeb Technologies, Inc.
> 4150 Mission Blvd., Suite 220
> San Diego, CA 92109
>
> Office:   858-882-5820
> Mobile:   619-997-5560
> Fax:      858-228-3667
>
> Email:    jef...@de...
> WWW:      www.defenseweb.com
>
> ----------------------------------
> NOTICE: This email message is for the sole use of the intended
> recipient(s) and may contain confidential and privileged information.
> Any unauthorized review, use, disclosure or distribution is prohibited.
> If you are not the intended recipient, please contact the sender by
> reply
> email and destroy all copies of the original message.
>
> To contact our email administrator directly, send to
> pos...@de....
> ----------------------------------
>
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Microsoft
> Defy all challenges. Microsoft(R) Visual Studio 2008.
> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> _______________________________________________
> ncpl-user mailing list
> ncp...@li...
> https://lists.sourceforge.net/lists/listinfo/ncpl-user
>
>
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.516 / Virus Database: 269.21.4/1313 - Release Date:
> 05/03/2008
> 09:50
>
>
>
>

[ncpl-user] NCPL v1.000.051 released !

[Yves V. d. H. <yv...@us...>]

 Changelog:

Compatibility: This release is compatible with Nagios 1.x up to release
1.4.1
Compatibility: This release is compatible with Nagios 2.x up to release 2.11

- NCPL
    Some bugfixes in the dbschema

- CGI.pm
    Changed DisplayExportForm() - category is only displayed when a filetype
is selected

- Database.pm
    Changed doConnectDBI() - added autoreconnect feature

- Export.pm
    Added support for addressx in doExport_Contact()
    Bugfix for "Use of uninitialized value in split at
../../../lib/NCPL/Export.pm line 414"
    Renamed some fields (bugfix dbschema)

- Remote.pm
    Added extra feedback via html_statusmsg()

- Tools.pm
    Bugfix in syncContactgroupsWithHostContactgroups()

- Import.pm
    Added support for addressx in doImport_Contact()
    Renamed some fields (bugfix dbschema)

- export-without-session.pl
    Changed 'use lib' path

- contacts.pl
    Renamed addresses to addressx

- nagios.pl
    Renamed some fields (bugfix dbschema)

[ncpl-user] Release of Nagios 3.0

[Jeff S. - D. T. <jef...@de...>]

I know if was just released as stable but are you planning on supporting
Nagios 3.0?  If you are do you have a timeline on when you will?

Thank you,
Jeff Shumard

--------------------------------------------
Jeff Shumard
UNIX Administrator
 
DefenseWeb Technologies, Inc.
4150 Mission Blvd., Suite 220
San Diego, CA 92109
 
Office:   858-882-5820
Mobile:   619-997-5560
Fax:      858-228-3667
 
Email:    jef...@de...
WWW:      www.defenseweb.com

----------------------------------
NOTICE: This email message is for the sole use of the intended
recipient(s) and may contain confidential and privileged information.
Any unauthorized review, use, disclosure or distribution is prohibited. 
If you are not the intended recipient, please contact the sender by
reply
email and destroy all copies of the original message.

To contact our email administrator directly, send to
pos...@de....
----------------------------------

Re: [ncpl-user] Issues with NCPL v1.00.050.

[Yves V. d. H. <yv...@us...>]

Hi Jeff,

Thanks for your remarks. 
I'll try to fix them as soon as possible.

Kind regards,
Yves

-----Original Message-----
From: ncp...@li...
[mailto:ncp...@li...] On Behalf Of Jeff Shumard -
DefenseWeb Technologies
Sent: dinsdag 4 maart 2008 22:45
To: ncp...@li...
Subject: [ncpl-user] Issues with NCPL v1.00.050.

There were some issues that I was having with the new software.  I also
have a feature request for future versions.

Feature Requests:
1)  For settings with set options like with logging you should probably
use a drop down menue instead of a text field.

I had to fix a couple of things in order for the nagios.cfg to work
properly. Just wanted to make sure you were aware of these problems.

Issues with nagios.cfg:
1) sleep_time needs to be decimal in the database.
	Cange the type from int to decimal in nagios_nagios table.
		alter table nagios_nagios change sleep_time sleep_time
DECIMAL(10,2) unsigned;
2) You have eventhandler_timeout when it needs to be
event_handler_timeout.
	Change everything in nagios.pl from eventhandler_timeout to
event_handler_timeout.
	Change everything in Export.pm from eventhandler_timeout to
event_handler_timeout.
	Change everything in Import.pm from eventhandler_timeout to
event_handler_timeout.
	Change column name in nagios_nagios to event_handler_timeout.
		alter table nagios_nagios change event_handler_timeout
event_handler_timeout int(10) unsigned;
3) You have oscp_timeout when it needs to be ocsp_timeout.
	Change everything in nagios.pl from oscp_timeout to
ocsp_timeout.
	Change everything in Export.pm from oscp_timeout to
ocsp_timeout.
	Change everything in Import.pm from oscp_timeout to
ocsp_timeout.
	Change column name in nagios_nagios to ocsp_timeout.
		alter table nagios_nagios change oscp_timeout
ocsp_timeout int(10) unsigned;
4) You have host_fresshness_check_interval when it needs to be
host_freshness_check_interval.
	Change everything in nagios.pl from
host_fresshness_check_interval to host_freshness_check_interval.
	Change everything in Export.pm from
host_fresshness_check_interval to host_freshness_check_interval.
	Change everything in Import.pm from
host_fresshness_check_interval to host_freshness_check_interval.
	Change column name in nagios_nagios to
host_freshness_check_interval.
		alter table nagios_nagios change
host_fresshness_check_interval host_freshness_check_interval int(10)
unsigned;	
5) You didn't include event_broker_options.
	Added event_broker_options to nagios.pl
		my $event_broker_options                      = (defined
$cgi->param('event_broker_options'))                      ?
$cgi->param('event_broker_options')                      : '';
	
`event_broker_options`=@{[$dbh->quote($event_broker_options)]},
		$event_broker_options = $ref->{"event_broker_options"};
		html_textbox("event_broker_options",
"event_broker_options:", "general", 50, $event_broker_options, '', '',
'', 0, $action, $debug);
	Added event_broker_options to Export.pm.
		print $CFG
"event_broker_options=$hash_ref->{event_broker_options}\n" if (defined
$hash_ref->{event_broker_options} && $hash_ref->{event_broker_options}
ne '');
	Added event_broker_options to Import.pm.
		`event_broker_options`=@{[$dbh->quote($configHash->{
event_broker_options })]},
	Added column  to nagios_nagios table.
		alter table nagios_nagios add event_broker_options
varchar(255) after enable_event_handlers;
6) You didn't include broker_module.
	Added broker_module to nagios.pl.
		my $broker_module                             = (defined
$cgi->param('broker_module'))                             ?
$cgi->param('broker_module')                             : '';
		`broker_module`=@{[$dbh->quote($broker_module)]},
		$broker_module = $ref->{"broker_module"};
		html_textbox("broker_module", "broker_module:",
"general", 50, $broker_module, '', '', '', 0, $action, $debug);
	Added broker_module to Export.pm.
		print $CFG "broker_module=$hash_ref->{broker_module}\n"
if (defined $hash_ref->{broker_module} && $hash_ref->{broker_module} ne
'');
	Added broker_module to Import.pm.
		`broker_module`=@{[$dbh->quote($configHash->{
broker_module })]},
	Added column to nagios_nagios table.
		alter table nagios_nagios add broker_module varchar(255)
after event_broker_options;
7) You didn't include p1_file
	Added p1_file to nagios.pl
		my $p1_file                                   = (defined
$cgi->param('p1_file'))                                   ?
$cgi->param('p1_file')                                   : '';
		`p1_file`=@{[$dbh->quote($p1_file)]},
		$p1_file = $ref->{"p1_file"};
		html_textbox("p1_file", "p1_file:", "general", 50,
$p1_file, '', '', '', 0, $action, $debug);
	Added p1_file to Export.pm.
		print $CFG "p1_file=$hash_ref->{p1_file}\n" if (defined
$hash_ref->{p1_file} && $hash_ref->{p1_file} ne '');
	Added p1_file to Import.pm.
		`p1_file`=@{[$dbh->quote($configHash->{ p1_file })]},
	Added column to nagios_nagios table.
		alter table nagios_nagios add p1_file varchar(255) after
status_file;
8) You didn't include daemon_dumps_core.
	Added daemon_dumps_core to nagios.pl
		my $daemon_dumps_core                         = (defined
$cgi->param('daemon_dumps_core'))                         ?
$cgi->param('daemon_dumps_core')                         : 0;
	
`daemon_dumps_core`=@{[$dbh->quote($daemon_dumps_core)]},
		$daemon_dumps_core = $ref->{"daemon_dumps_core"};
		html_enabledbox("daemon_dumps_core",
"daemon_dumps_core:", "general", $daemon_dumps_core, '', '', '', 0,
$action, $debug);
	Added daemon_dumps_core to Export.pm
		print $CFG
"daemon_dumps_core=$hash_ref->{daemon_dumps_core}\n" if (defined
$hash_ref->{daemon_dumps_core} && $hash_ref->{daemon_dumps_core} =~
/[01]/);
	Added daemon_dumps_core to to Import.pm
		`daemon_dumps_core`=@{[$dbh->quote($configHash->{
daemon_dumps_core })]},
	Added column to nagios_nagios table.
		alter table nagios_nagios add daemon_dumps_core
tinyint(1) unsigned DEFAULT 0 after admin_pager;

Thank you,
Jeff Shumard

--------------------------------------------
Jeff Shumard
UNIX Administrator
 
DefenseWeb Technologies, Inc.
4150 Mission Blvd., Suite 220
San Diego, CA 92109
 
Office:   858-882-5820
Mobile:   619-997-5560
Fax:      858-228-3667
 
Email:    jef...@de...
WWW:      www.defenseweb.com

----------------------------------
NOTICE: This email message is for the sole use of the intended
recipient(s) and may contain confidential and privileged information.
Any unauthorized review, use, disclosure or distribution is prohibited. 
If you are not the intended recipient, please contact the sender by
reply
email and destroy all copies of the original message.

To contact our email administrator directly, send to
pos...@de....
----------------------------------


-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
ncpl-user mailing list
ncp...@li...
https://lists.sourceforge.net/lists/listinfo/ncpl-user



-- 
No virus found in this incoming message.
Checked by AVG Free Edition. 
Version: 7.5.516 / Virus Database: 269.21.4/1313 - Release Date: 05/03/2008
09:50

[ncpl-user] Issues with NCPL v1.00.050.

[Jeff S. - D. T. <jef...@de...>]

There were some issues that I was having with the new software.  I also
have a feature request for future versions.

Feature Requests:
1)  For settings with set options like with logging you should probably
use a drop down menue instead of a text field.

I had to fix a couple of things in order for the nagios.cfg to work
properly. Just wanted to make sure you were aware of these problems.

Issues with nagios.cfg:
1) sleep_time needs to be decimal in the database.
	Cange the type from int to decimal in nagios_nagios table.
		alter table nagios_nagios change sleep_time sleep_time
DECIMAL(10,2) unsigned;
2) You have eventhandler_timeout when it needs to be
event_handler_timeout.
	Change everything in nagios.pl from eventhandler_timeout to
event_handler_timeout.
	Change everything in Export.pm from eventhandler_timeout to
event_handler_timeout.
	Change everything in Import.pm from eventhandler_timeout to
event_handler_timeout.
	Change column name in nagios_nagios to event_handler_timeout.
		alter table nagios_nagios change event_handler_timeout
event_handler_timeout int(10) unsigned;
3) You have oscp_timeout when it needs to be ocsp_timeout.
	Change everything in nagios.pl from oscp_timeout to
ocsp_timeout.
	Change everything in Export.pm from oscp_timeout to
ocsp_timeout.
	Change everything in Import.pm from oscp_timeout to
ocsp_timeout.
	Change column name in nagios_nagios to ocsp_timeout.
		alter table nagios_nagios change oscp_timeout
ocsp_timeout int(10) unsigned;
4) You have host_fresshness_check_interval when it needs to be
host_freshness_check_interval.
	Change everything in nagios.pl from
host_fresshness_check_interval to host_freshness_check_interval.
	Change everything in Export.pm from
host_fresshness_check_interval to host_freshness_check_interval.
	Change everything in Import.pm from
host_fresshness_check_interval to host_freshness_check_interval.
	Change column name in nagios_nagios to
host_freshness_check_interval.
		alter table nagios_nagios change
host_fresshness_check_interval host_freshness_check_interval int(10)
unsigned;	
5) You didn't include event_broker_options.
	Added event_broker_options to nagios.pl
		my $event_broker_options                      = (defined
$cgi->param('event_broker_options'))                      ?
$cgi->param('event_broker_options')                      : '';
	
`event_broker_options`=@{[$dbh->quote($event_broker_options)]},
		$event_broker_options = $ref->{"event_broker_options"};
		html_textbox("event_broker_options",
"event_broker_options:", "general", 50, $event_broker_options, '', '',
'', 0, $action, $debug);
	Added event_broker_options to Export.pm.
		print $CFG
"event_broker_options=$hash_ref->{event_broker_options}\n" if (defined
$hash_ref->{event_broker_options} && $hash_ref->{event_broker_options}
ne '');
	Added event_broker_options to Import.pm.
		`event_broker_options`=@{[$dbh->quote($configHash->{
event_broker_options })]},
	Added column  to nagios_nagios table.
		alter table nagios_nagios add event_broker_options
varchar(255) after enable_event_handlers;
6) You didn't include broker_module.
	Added broker_module to nagios.pl.
		my $broker_module                             = (defined
$cgi->param('broker_module'))                             ?
$cgi->param('broker_module')                             : '';
		`broker_module`=@{[$dbh->quote($broker_module)]},
		$broker_module = $ref->{"broker_module"};
		html_textbox("broker_module", "broker_module:",
"general", 50, $broker_module, '', '', '', 0, $action, $debug);
	Added broker_module to Export.pm.
		print $CFG "broker_module=$hash_ref->{broker_module}\n"
if (defined $hash_ref->{broker_module} && $hash_ref->{broker_module} ne
'');
	Added broker_module to Import.pm.
		`broker_module`=@{[$dbh->quote($configHash->{
broker_module })]},
	Added column to nagios_nagios table.
		alter table nagios_nagios add broker_module varchar(255)
after event_broker_options;
7) You didn't include p1_file
	Added p1_file to nagios.pl
		my $p1_file                                   = (defined
$cgi->param('p1_file'))                                   ?
$cgi->param('p1_file')                                   : '';
		`p1_file`=@{[$dbh->quote($p1_file)]},
		$p1_file = $ref->{"p1_file"};
		html_textbox("p1_file", "p1_file:", "general", 50,
$p1_file, '', '', '', 0, $action, $debug);
	Added p1_file to Export.pm.
		print $CFG "p1_file=$hash_ref->{p1_file}\n" if (defined
$hash_ref->{p1_file} && $hash_ref->{p1_file} ne '');
	Added p1_file to Import.pm.
		`p1_file`=@{[$dbh->quote($configHash->{ p1_file })]},
	Added column to nagios_nagios table.
		alter table nagios_nagios add p1_file varchar(255) after
status_file;
8) You didn't include daemon_dumps_core.
	Added daemon_dumps_core to nagios.pl
		my $daemon_dumps_core                         = (defined
$cgi->param('daemon_dumps_core'))                         ?
$cgi->param('daemon_dumps_core')                         : 0;
	
`daemon_dumps_core`=@{[$dbh->quote($daemon_dumps_core)]},
		$daemon_dumps_core = $ref->{"daemon_dumps_core"};
		html_enabledbox("daemon_dumps_core",
"daemon_dumps_core:", "general", $daemon_dumps_core, '', '', '', 0,
$action, $debug);
	Added daemon_dumps_core to Export.pm
		print $CFG
"daemon_dumps_core=$hash_ref->{daemon_dumps_core}\n" if (defined
$hash_ref->{daemon_dumps_core} && $hash_ref->{daemon_dumps_core} =~
/[01]/);
	Added daemon_dumps_core to to Import.pm
		`daemon_dumps_core`=@{[$dbh->quote($configHash->{
daemon_dumps_core })]},
	Added column to nagios_nagios table.
		alter table nagios_nagios add daemon_dumps_core
tinyint(1) unsigned DEFAULT 0 after admin_pager;

Thank you,
Jeff Shumard

--------------------------------------------
Jeff Shumard
UNIX Administrator
 
DefenseWeb Technologies, Inc.
4150 Mission Blvd., Suite 220
San Diego, CA 92109
 
Office:   858-882-5820
Mobile:   619-997-5560
Fax:      858-228-3667
 
Email:    jef...@de...
WWW:      www.defenseweb.com

----------------------------------
NOTICE: This email message is for the sole use of the intended
recipient(s) and may contain confidential and privileged information.
Any unauthorized review, use, disclosure or distribution is prohibited. 
If you are not the intended recipient, please contact the sender by
reply
email and destroy all copies of the original message.

To contact our email administrator directly, send to
pos...@de....
----------------------------------

[ncpl-user] NCPL v1.000.050 released !

[Yves V. d. H. <yv...@gm...>]

 Changelog:

- NCPL
    General code optimalisation and cleanup
    Replaced #!/usr/bin/perl by #!/usr/bin/env perl

- CGI.pm
    Added support for multiple NCPL instances
    New implementation of html_listbox_multi()

- Export.pm
    Added doExport_Cgi()
    Added doExport_Main()

- Fix.pm
    Added fixNagiosConfig_Cgi()
    Added fixNagiosConfig_Main()
    Added fixNagiosConfig_Remoteconfigs()
    Fix now only runs when previous action was successful

- Htmldoc.pm
    Added "Content-disposition: attachment" to page headers

- Import.pm
    Added doImport_Cgi()
    Added doImport_Main()
    Added import from remote servers via SSH
    Automatic detection of checkcommands/misccommands if filename matches
the configured filenames
    Some optimalisations of the import process

- Log.pm
    Added WriteLogEntryDB() - logging to database

- NCPL.pm
    Added support for multiple NCPL instances
    Added getHashWithEmailAddresses()
    Added getFiletypeByFilename()
    Replaced various list convertion functions by YVDHOVE::List

- Remote.pm
    Added execRemoteServerCommand()
    Added remote_ssh_port field
    Added NCPL header to the config files
    getHashWithEmailAddresses() is now used to send notifications

- Server.pm
    Added export for CGI files
    Added server_description field
    Added server_nagios_nagiostats field
    Added server_ssh_port field
    getHashWithEmailAddresses() is now used to send notifications

- System.pm
    Replaced NCPL::System by YVDHOVE::System

- Tools.pm
    Added createHostgroupsPerEnvironment()
    Code optimalisation for nslookup (multiple addresses, aliases):
contributed by Alex Peeters

- cgi.pl
    New module

- hostextinfo.pl
    Bugfix: removed extra ListAllRecords()

- hosts.pl
    Added links to Servicedependencies
    Added links to Serviceescalations
    'Duplicate Host' now duplicates host, services, hostescalations,
hostextinfo, serviceescalations, serviceextinfo, remoteconfigs

- index.pl
    Added link to createHostgroupsPerEnvironment()
    Added link to cgi.pl
    Added link to nagios.pl
    Added link to instances.pl
    Added 'NCPL Instance Config' & 'NCPL Global Config' groups

- install.pl
    Added 'Restart Daemon (YES/NO)' option

- instances.pl
    New module

- nagios.pl
    New module

- process.pl
    Change nagios.pl renamed to process.pl

- remoteconfigs.pl
    Added execRemoteServerCommand()
    Added remote_ssh_port field

- servers.pl
    Added server_description field
    Added server_nagios_nagiostats field
    Added server_ssh_port field

- statistics.pl
    Added stats for NCPL Instances

- tools.pl
    Added createHostgroupsPerEnvironment()

[ncpl-user] Couple of Export issues.

[Jeff S. - D. T. <jef...@de...>]

There are still a couple of export issues that I am finding when
exporting services.  There is only one that I had to resolve due to it
was a serious issue.  In our Distributed monitoring system we don't send
all our notifications from the Central Server.  We also send
notifications from the Distributed servers as well.  The problem is when
we export our service config and it sees that the notifications are
disabled in the template or in the service it just doesn't add that line
in the config which activates notifications from the Distributed host
and the Central Host.  I resolved this by adding a this line to the
EXPORT.conf.

$PASSIVE_SERVICES_NOTIFICATIONS     =3D '1';

Then added this to the Export.pm.

Added line 55

$PASSIVE_SERVICES_NOTIFICATIONS);

Replaced the print notification line with the following.

if( $PASSIVE_SERVICES_OVERRIDE && $isPassive &&
!($PASSIVE_SERVICES_IGNORE =3D~ $hash_ref->{use}) && (defined
$PASSIVE_SERVICES_NOTIFICATIONS and $PASSIVE_SERVICES_NOTIFICATIONS ne
'') )
            {
                        print $CFG "  notifications_enabled
$PASSIVE_SERVICES_NOTIFICATIONS\n";
            }
            else
            {
                print $CFG "  notifications_enabled
$hash_ref->{notifications_enabled}\n" if (defined
$hash_ref->{notifications_enabled});
            }

The other issues which I believe will resolve the issue above and the
rest of my problems is when you export the services if something is
disabled in the template then it doesn't put it into the config.  This
is a feature request that you add something to the database to use as a
flag saying that the template is not a service and print out all the
settings for the template.  This way if notifications or any other
setting is disabled for the template it will be shut off for the service
if it's not enabled in the service.

Thank you,
Jeff

--------------------------------------------
Jeff Shumard
UNIX Administrator
=20
DefenseWeb Technologies, Inc.
4150 Mission Blvd., Suite 220
San Diego, CA 92109
=20
Office:   858-272-8505 x5897
Mobile:   619-997-5560
Fax:      858-228-3667
=20
Email:    jef...@de...
WWW:      www.defenseweb.com

----------------------------------
NOTICE: This email message is for the sole use of the intended
recipient(s) and may contain confidential and privileged information.
Any unauthorized review, use, disclosure or distribution is prohibited.=20
If you are not the intended recipient, please contact the sender by
reply
email and destroy all copies of the original message.

To contact our email administrator directly, send to
pos...@de....
----------------------------------

Re: [ncpl-user] Question on exporting Passive Checks.

[Yves V. d. H. <yv...@us...>]

Hi,

>>I see there is a passive_services_ignore in the EXPORT.conf
Yes, indeed. Here you can put the service_names of the templates you don't
want to override.

>>We have added the service descriptions but that doesn't seem to work.
You have to use the service_name instead of the service descriptions.

>>How do you configure this variable and is it possible to do what we want?
$PASSIVE_SERVICES_IGNORE = 'ignore1,ignore2,ignore3';

Kind regards,
Yves

-----Original Message-----
From: ncp...@li...
[mailto:ncp...@li...] On Behalf Of Jeff Shumard -
DefenseWeb Technologies
Sent: maandag 24 september 2007 20:15
To: General NCPL user support and discussion mailing list
Subject: [ncpl-user] Question on exporting Passive Checks.

We are having an issue once we have started to configure the
passive_services_override.  Everything seems to be working just fine it
creates the correct passive checks for the central host and distributed.
The problem we are having is on the central host.  There are some
services we use a different template for so we don't want it to change
the template.  I see there is a passive_services_ignore in the
EXPORT.conf.  Is this what we would need to use in order to not have it
process the service override?  We have added the service descriptions
but that doesn't seem to work.  How do you configure this variable and
is it possible to do what we want?

Thank you,
Jeff

-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
ncpl-user mailing list
ncp...@li...
https://lists.sourceforge.net/lists/listinfo/ncpl-user



-- 
No virus found in this incoming message.
Checked by AVG Free Edition. 
Version: 7.5.487 / Virus Database: 269.13.27/1020 - Release Date: 20-09-2007
12:07

[ncpl-user] Question on exporting Passive Checks.

[Jeff S. - D. T. <jef...@de...>]

We are having an issue once we have started to configure the
passive_services_override.  Everything seems to be working just fine it
creates the correct passive checks for the central host and distributed.
The problem we are having is on the central host.  There are some
services we use a different template for so we don't want it to change
the template.  I see there is a passive_services_ignore in the
EXPORT.conf.  Is this what we would need to use in order to not have it
process the service override?  We have added the service descriptions
but that doesn't seem to work.  How do you configure this variable and
is it possible to do what we want?

Thank you,
Jeff

[ncpl-user] NCPL v1.000.049 released!

[Yves V. d. H. <yv...@us...>]

Changelog:

- NCPL
	Optimized the 'use' of external libraries for better response times
	Removed 'use Switch' because it slows down NCPL (replaced by SWITCH statement)
		
- Makefile.PL
	NCPL now requires DBI v1.41 or higher

- CGI.pm
	A nagios server can now be marked as 'activated'
	Added filterExactMatch implementation
	Changed implementation of DisplayRenameForm()
	
- Database.pm
	A nagios server can now be marked as 'activated'

- Export.pm
	Added warning message to the config files: 'THIS FILE IS
AUTOMATICALLY GENERATED BY NCPL. DO NOT MODIFY THIS FILE MANUALLY!'
	Added doExport_Hostdependency()
	Added doExport_Hostgroupescalation()
	Added doExport_Servicedependency()
	Added doExport_Serviceescalation()
	Bugfix: Better usage of getActiveItems()

- Fix.pm
	Added fixDeps for parents field in fixNagiosConfig_Hosts()
	Bugfix: Fix for module with filetype = undef
	Fixed an issue with some queries to avoid a signal 11 with MySQL
5.0.41 (MySQL bug #29013)

- Import.pm
	Added doImport_Hostdependency()
	Added doImport_Hostgroupescalation()
	Added doImport_Servicedependency()
	Added doImport_Serviceescalation()
			
- Remote.pm
	Added remote_host_address
	Changes needed to allow exports of remoteconfigs by servertype

- Reports.pm
	Hosts marked as 'virtual' are now excluded from the reports
		
- Server.pm
	Bugfix: diff syntax (getVersion)

- Tools.pm
	Added syncServiceDependencies()
	tempFilesCleanup() now deletes expired and empty sessions

- contacts.pl
	Added rename record option

- index.pl
	Added link to hostdependencies()
	Added link to servicedependencies()
	Added link to serviceescalations()
	
- remoteconfigs.pl
	Added combobox with HOSTEXTINFO to allow exports of remoteconfigs by servertype
	Added remote_host_address

- hostdependencies.js
	New module

- hostgroupescalations.js
	New module
			
- remoteconfigs.js
	Added combobox with HOSTEXTINFO to allow exports of remoteconfigs by servertype

- servicedependencies.js
	New module
	
- serviceescalations.js
	New module	
	
- hostdependencies.pl
	New module

- hostgroupescalations.pl
	New module
		
- resources.pl
	Added rename record option

- server.pl
	A nagios server can now be marked as 'activated'

- servicedependencies.pl
	New module

- serviceescalations.pl
	New module
	
- tools.pl
	Added syncServiceDependencies()

Re: [ncpl-user] Just found out NCPL

[Yves V. d. H. <yv...@us...>]

Hi,

>>I am disappointed that there is no documentation on actually managing
NCPL.
Writing documentation (and a bug in the export module) is my number one
priority at the moment.

>>I assume that in order to get started having NCPL manage an already
configured server I need to add it using Server management.
Correct.

>>Can you take one Nagios central configuration and select hosts and
services out if it to make a new configuration for a new server?
You can do this with one record.
Example: server_name: probe1, central
In this case the record will be exported for probe1 and central
On probe 1 it will be an active check and on the central the record will be
passive (display only).

>>However, when I adding a server_identity_user and server_identity_key to a
server the add fails. 
>>When I leave them out, NCPL will update the Record but Nagios config
cleanup/fixup fails. 
I fixed this bug. It doesn't break anything, it's just the error message
that's wrong.

>>What is the security model for sever_identity_user and
server_identity_key?
All deployments of config files is done via ssh. You have to enter the ssh
username and ssh key here.
* Server_identity_user = nagios
* Server_identity_key = /export/home/nagios/.ssh/your_ssh_key.id
Your webserver needs to be able to access this file.

Regards,
Yves

-----Original Message-----
From: ncp...@li...
[mailto:ncp...@li...] On Behalf Of Jonathan Call
Sent: vrijdag 20 april 2007 20:22
To: ncp...@li...
Subject: [ncpl-user] Just found out NCPL

I am managing one centralized Nagios deployment which is soon going to
become a distributed Nagios deployment. I stumbled upon your program on
NagiosExchange and thought it would be great for my situation.

I appreciated the good installation script and instructions however I am
disappointed that there is no documentation on actually managing NCPL.
(docs in the install only has the GPL and Nagios PDF files) Because of
this I haven't been able to use it yet.

I have a few questions:
I assume that in order to get started having NCPL manage an already
configured server I need to add it using Server management. However,
when I adding a server_identity_user and server_identity_key to a server
the add fails. When I leave them out, NCPL will update the Record but
Nagios config cleanup/fixup fails.

Can you take one Nagios central configuration and select hosts and
services out if it to make a new configuration for a new server?
 
What is the security model for sever_identity_user and
server_identity_key? Does it want a user/ssh key combination? An actual
password?

Thank you,
Jonathan


-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
ncpl-user mailing list
ncp...@li...
https://lists.sourceforge.net/lists/listinfo/ncpl-user



-- 
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.446 / Virus Database: 269.5.5/769 - Release Date: 19-04-2007
17:56

[ncpl-user] Just found out NCPL

[Jonathan C. <jc...@ve...>]

I am managing one centralized Nagios deployment which is soon going to
become a distributed Nagios deployment. I stumbled upon your program on
NagiosExchange and thought it would be great for my situation.

I appreciated the good installation script and instructions however I am
disappointed that there is no documentation on actually managing NCPL.
(docs in the install only has the GPL and Nagios PDF files) Because of
this I haven't been able to use it yet.

I have a few questions:
I assume that in order to get started having NCPL manage an already
configured server I need to add it using Server management. However,
when I adding a server_identity_user and server_identity_key to a server
the add fails. When I leave them out, NCPL will update the Record but
Nagios config cleanup/fixup fails.

Can you take one Nagios central configuration and select hosts and
services out if it to make a new configuration for a new server?
=20
What is the security model for sever_identity_user and
server_identity_key? Does it want a user/ssh key combination? An actual
password?

Thank you,
Jonathan

Re: [ncpl-user] NCPL-1.000.048 on RHEL4

[Yves V. d. H. <yv...@va...>]

Hi Alex,

>>Can't set DBI::db=HASH(0x12b8630)->{PrintWarn}: unrecognised attribute
The attribute PrintWarn is only available starting from DBI version 1.41. 
You will have to to upgrade your perl module to a higher version.
I'll modify the Makefile so it will require DBI 1.41 or higher for future
releases.

>>What is NAGIOS-BY-DB?
1) It's something historical we used at my work with nagios 1.0. Our network
department used nagios 1.0 to test our backbone and the testresults were
stored in the nagios database format. We used a perl script to query the
testresults and display them on our nagios server.
2) We also used the testresults in the 'network' database to synchronise our
nagios configurations (NagiosByDb Sync)

Regards,
Yves

-----Original Message-----
From: ncp...@li...
[mailto:ncp...@li...] On Behalf Of Alex Burger
Sent: zaterdag 14 april 2007 19:48
To: ncp...@li...
Subject: [ncpl-user] NCPL-1.000.048 on RHEL4


Hi.

When I try to connect to ncpl after installing, I get this error in my 
httpd error log:=

Can't set DBI::db=HASH(0x12b8630)->{PrintWarn}: unrecognised attribute 
or invalid value at 
/usr/lib64/perl5/vendor_perl/5.8.5/x86_64-linux-thread-multi/DBI.pm line 
636.

I'm using:

-RHEL4 (64bit)
-Perl v5.8.5 built for x86_64-linux-thread-multi
-DBI v1.40
-DBD::mysql v2.9004

It is able to log in to the database defined in DATABASE.conf.  I did 
not configure NAGIOSBYDB.conf as I'm not even sure what this is.  What 
is NAGIOS-BY-DB?  It doesn't look like NDO.

Alex


-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
ncpl-user mailing list
ncp...@li...
https://lists.sourceforge.net/lists/listinfo/ncpl-user



-- 
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.446 / Virus Database: 269.4.0/760 - Release Date: 13-04-2007
20:04

[ncpl-user] NCPL-1.000.048 on RHEL4

[Alex B. <al...@us...>]

Hi.

When I try to connect to ncpl after installing, I get this error in my 
httpd error log:=

Can't set DBI::db=HASH(0x12b8630)->{PrintWarn}: unrecognised attribute 
or invalid value at 
/usr/lib64/perl5/vendor_perl/5.8.5/x86_64-linux-thread-multi/DBI.pm line 
636.

I'm using:

-RHEL4 (64bit)
-Perl v5.8.5 built for x86_64-linux-thread-multi
-DBI v1.40
-DBD::mysql v2.9004

It is able to log in to the database defined in DATABASE.conf.  I did 
not configure NAGIOSBYDB.conf as I'm not even sure what this is.  What 
is NAGIOS-BY-DB?  It doesn't look like NDO.

Alex

Re: [ncpl-user] Export issues

[Jeff S. - D. T. <jef...@de...>]

I am not configuring DISTRIBUTED Servers right now so I just made these
changes so it would output the correct information into the
configuration files.

#
------------------------------------------------------------------------
---------

sub isActiveServiceCheckEnabled($$$$$$$$)
{

        my ($dbh, $serverconfig, $server_name, $table, $use,
$active_checks_enabled, $register, $debug) =3D @_;

        if (defined $register && $register=3D=3D0)
        {
                return $active_checks_enabled;
        }
        else
        {
#               my %serverconfig =3D %$serverconfig;
#
#               if ( $serverconfig{server_type} eq 'DISTRIBUTED' )
#               {
#                       return ( $active_checks_enabled ||
getFieldFromTemplate($dbh, $server_name, $table, $use,
'active_checks_enabled', $debug) );
#               }
#               else
#               {
#                       ( distributedNagiosServerExistsForRecord($dbh,
$server_name, $debug) ) ? return 0 : getFieldFromTemplate($dbh,
$server_name, $table, $use, 'active_checks_enabled', $debug);
#               }
                return $active_checks_enabled;
        }

}

--------------------------------------------
Jeff Shumard
UNIX Administrator
=20
DefenseWeb Technologies, Inc.
4150 Mission Blvd., Suite 220
San Diego, CA 92109
=20
Office:   858-272-8505 x5897
Mobile:   619-997-5560
Fax:      858-228-3667
=20
Email:    jef...@de...
WWW:      www.defenseweb.com

----------------------------------
NOTICE: This email message is for the sole use of the intended
recipient(s) and may contain confidential and privileged information.
Any unauthorized review, use, disclosure or distribution is prohibited.=20
If you are not the intended recipient, please contact the sender by
reply
email and destroy all copies of the original message.

To contact our email administrator directly, send to
pos...@de....
----------------------------------

-----Original Message-----
From: ncp...@li...
[mailto:ncp...@li...] On Behalf Of Yves Van
den Hove
Sent: Thursday, April 12, 2007 11:04 AM
To: 'General NCPL user support and discussion mailing list'
Subject: Re: [ncpl-user] Export issues

Hi,

Could you please send me your changes so that I can see if there's a bug
or
just a misconfiguration issue?

Thanks
Yves

-----Original Message-----
From: ncp...@li...
[mailto:ncp...@li...] On Behalf Of Jeff
Shumard -
DefenseWeb Technologies
Sent: woensdag 11 april 2007 23:30
To: General NCPL user support and discussion mailing list
Subject: Re: [ncpl-user] Export issues

The problem is in your Export.pm.  It is on your subroutine's for
isActiveServiceCheckEnabled and isPassiveServiceCheckEnabled.  I made
some changes to make it work but I am not sure if it will break
something else.


-----Original Message-----
From: ncp...@li...
[mailto:ncp...@li...] On Behalf Of Jeff
Shumard - DefenseWeb Technologies
Sent: Wednesday, April 11, 2007 1:42 PM
To: General NCPL user support and discussion mailing list
Subject: Re: [ncpl-user] Export issues

Here is some more information that I have found and I am going through
the code now to see if I can track down what the issue is.  This is
pulled from my apache error long.

Use of uninitialized value in concatenation (.) or string at
/usr/lib/perl5/site_perl/5.8.5/NCPL/Export.pm line 711

Thanks

-----Original Message-----
From: ncp...@li...
[mailto:ncp...@li...] On Behalf Of Jeff
Shumard - DefenseWeb Technologies
Sent: Tuesday, April 10, 2007 10:55 AM
To: ncp...@li...
Subject: [ncpl-user] Export issues

I have imported my configuration of an existing system into NCPL and
that worked just fine and I can see all my configurations are correct.
They are even setup correctly in the database.  When I export the
configuration that's when the problem happens.  The services.cfg file is
not being exported correctly.  There are no 1 or 0 being added to the
active_checks_enabled or passive_checks_enabled.  I have to manually
make the change to the file in order for this to work properly.

There are also a lot of options on the mail screen which are greyed out.
The main ones I am interested in are the "Main Configuration file", CGI
configuration file", "Service Dependencies", and "Service Excalations".
Is this something you are working on implementing anytime soon or is
that not going to be available for a while?

Thank you

------------------------------------------------------------------------
-
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share
your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=3Djoin.php&p=3Dsourceforge&CID=3D=
DEVDE
V
_______________________________________________
ncpl-user mailing list
ncp...@li...
https://lists.sourceforge.net/lists/listinfo/ncpl-user

------------------------------------------------------------------------
-
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share
your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=3Djoin.php&p=3Dsourceforge&CID=3D=
DEVDE
V
_______________________________________________
ncpl-user mailing list
ncp...@li...
https://lists.sourceforge.net/lists/listinfo/ncpl-user

------------------------------------------------------------------------
-
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share
your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=3Djoin.php&p=3Dsourceforge&CID=3D=
DEVDE
V
_______________________________________________
ncpl-user mailing list
ncp...@li...
https://lists.sourceforge.net/lists/listinfo/ncpl-user



--=20
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.446 / Virus Database: 269.0.0/754 - Release Date:
09-04-2007
22:59



------------------------------------------------------------------------
-
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share
your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=3Djoin.php&p=3Dsourceforge&CID=3D=
DEVDE
V
_______________________________________________
ncpl-user mailing list
ncp...@li...
https://lists.sourceforge.net/lists/listinfo/ncpl-user

Re: [ncpl-user] Export issues

[Jeff S. - D. T. <jef...@de...>]

I have answered your questions bellow.

-----Original Message-----
From: ncp...@li...
[mailto:ncp...@li...] On Behalf Of Yves Van
den Hove
Sent: Thursday, April 12, 2007 11:14 AM
To: 'General NCPL user support and discussion mailing list'
Subject: Re: [ncpl-user] Export issues

Hi,

>>I have imported my configuration of an existing system into NCPL and
>>that worked just fine and I can see all my configurations are correct.
>>They are even setup correctly in the database.  When I export the
>>configuration that's when the problem happens.  The services.cfg file
is
>>not being exported correctly.  There are no 1 or 0 being added to the
>>active_checks_enabled or passive_checks_enabled.  I have to manually
>>make the change to the file in order for this to work properly.
I need more info to be able to troubleshoot this problem.
Are you using a distributed setup (central nagios display with multiple
probes) or a single machine?
Are you sure that the passive template override config is correct
(EXPORT.conf)?
Are you sure that the field active_checks_enabled /
passive_checks_enabled
are filled in on your templates?

Currently I am only configuring a Central Host, and once this is done I
will start adding my other nagios servers to be controlled into this
host and setup a Centralized Nagios server which will be accepting
passive.  So right now I am not configuring any passive checks until I
get all my active checks working properly first.  The information in the
Database shows the correct information for all the services, active
check enabled and passive checks disabled for all the services.  When I
export the serives it adds the lines for active_checks_enabled and
passive_checks_enabled but with no values.  There is just a space behind
them and that's it.  I am not using templates yet either because I am
still trying to learn how to use the interface properly with out
documentation.  It's a trial and error thing, you know how that works.
I am not sure if the EXPORT.conf is configured properly or not.  Can you
explain it to me maybe that is the problem.  I just gave the
passive_hosts_override 0 and passive_services_override 0, because I was
not sure what they did.

>>The problem is in your Export.pm.  It is on your subroutine's for
isActiveServiceCheckEnabled and >>isPassiveServiceCheckEnabled.  I made
some
changes to make it work but I am not sure if it will break >>something
else.
>>Use of uninitialized value in concatenation (.) or string at
/usr/lib/perl5/site_perl/5.8.5/NCPL/Export.pm >>line 711
I think this error occurs when the fields active_checks_enabled /
passive_checks_enabled are not filled in (not on the template and not on
the
host/service record). I'll try to optimise these functions.

The values were filled in and the database has the correct values.  If
you look at the subroutine for isActiveServiceCheckEnabled you check to
see if register is set and it's set to 0 and if it's not you go into
your else statement which only dieals with DISTRIBUTED servers.  I just
commented everything out about the distributed servers for right now and
added " return $active_checks_enabled;" by it's self in the else
statement.  This is just so the export works correctly.  I did the same
for the isPassiveServiceCheckEnabled.  There is a better way of doing
this but I am sure it will break something in the future when I
configure DISTRIBUTED Servers.

>>There are also a lot of options on the mail screen which are greyed
out.
>>The main ones I am interested in are the "Main Configuration file",
CGI
>>configuration file", "Service Dependencies", and "Service
Excalations".
>>Is this something you are working on implementing anytime soon or is
>>that not going to be available for a while?
The MAIN and CGI configuration files are planned for the next release
because I need them myself.

Thanks for your response on this.

Regards,
Yves

-----Original Message-----
From: ncp...@li...
[mailto:ncp...@li...] On Behalf Of Jeff
Shumard -
DefenseWeb Technologies
Sent: dinsdag 10 april 2007 19:55
To: ncp...@li...
Subject: [ncpl-user] Export issues

I have imported my configuration of an existing system into NCPL and
that worked just fine and I can see all my configurations are correct.
They are even setup correctly in the database.  When I export the
configuration that's when the problem happens.  The services.cfg file is
not being exported correctly.  There are no 1 or 0 being added to the
active_checks_enabled or passive_checks_enabled.  I have to manually
make the change to the file in order for this to work properly.

There are also a lot of options on the mail screen which are greyed out.
The main ones I am interested in are the "Main Configuration file", CGI
configuration file", "Service Dependencies", and "Service Excalations".
Is this something you are working on implementing anytime soon or is
that not going to be available for a while?

Thank you

------------------------------------------------------------------------
-
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share
your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=3Djoin.php&p=3Dsourceforge&CID=3D=
DEVDE
V
_______________________________________________
ncpl-user mailing list
ncp...@li...
https://lists.sourceforge.net/lists/listinfo/ncpl-user



--=20
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.446 / Virus Database: 269.0.0/754 - Release Date:
09-04-2007
22:59




------------------------------------------------------------------------
-
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share
your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=3Djoin.php&p=3Dsourceforge&CID=3D=
DEVDE
V
_______________________________________________
ncpl-user mailing list
ncp...@li...
https://lists.sourceforge.net/lists/listinfo/ncpl-user

Re: [ncpl-user] Export issues

[Yves V. d. H. <yv...@us...>]

Hi,

>>I have imported my configuration of an existing system into NCPL and
>>that worked just fine and I can see all my configurations are correct.
>>They are even setup correctly in the database.  When I export the
>>configuration that's when the problem happens.  The services.cfg file is
>>not being exported correctly.  There are no 1 or 0 being added to the
>>active_checks_enabled or passive_checks_enabled.  I have to manually
>>make the change to the file in order for this to work properly.
I need more info to be able to troubleshoot this problem.
Are you using a distributed setup (central nagios display with multiple
probes) or a single machine?
Are you sure that the passive template override config is correct
(EXPORT.conf)?
Are you sure that the field active_checks_enabled / passive_checks_enabled
are filled in on your templates?

>>The problem is in your Export.pm.  It is on your subroutine's for
isActiveServiceCheckEnabled and >>isPassiveServiceCheckEnabled.  I made some
changes to make it work but I am not sure if it will break >>something else.
>>Use of uninitialized value in concatenation (.) or string at
/usr/lib/perl5/site_perl/5.8.5/NCPL/Export.pm >>line 711
I think this error occurs when the fields active_checks_enabled /
passive_checks_enabled are not filled in (not on the template and not on the
host/service record). I'll try to optimise these functions.

>>There are also a lot of options on the mail screen which are greyed out.
>>The main ones I am interested in are the "Main Configuration file", CGI
>>configuration file", "Service Dependencies", and "Service Excalations".
>>Is this something you are working on implementing anytime soon or is
>>that not going to be available for a while?
The MAIN and CGI configuration files are planned for the next release
because I need them myself.

Regards,
Yves

-----Original Message-----
From: ncp...@li...
[mailto:ncp...@li...] On Behalf Of Jeff Shumard -
DefenseWeb Technologies
Sent: dinsdag 10 april 2007 19:55
To: ncp...@li...
Subject: [ncpl-user] Export issues

I have imported my configuration of an existing system into NCPL and
that worked just fine and I can see all my configurations are correct.
They are even setup correctly in the database.  When I export the
configuration that's when the problem happens.  The services.cfg file is
not being exported correctly.  There are no 1 or 0 being added to the
active_checks_enabled or passive_checks_enabled.  I have to manually
make the change to the file in order for this to work properly.

There are also a lot of options on the mail screen which are greyed out.
The main ones I am interested in are the "Main Configuration file", CGI
configuration file", "Service Dependencies", and "Service Excalations".
Is this something you are working on implementing anytime soon or is
that not going to be available for a while?

Thank you

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
ncpl-user mailing list
ncp...@li...
https://lists.sourceforge.net/lists/listinfo/ncpl-user



-- 
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.446 / Virus Database: 269.0.0/754 - Release Date: 09-04-2007
22:59

Re: [ncpl-user] Export issues

[Yves V. d. H. <yv...@us...>]

Hi,

Could you please send me your changes so that I can see if there's a bug or
just a misconfiguration issue?

Thanks
Yves

-----Original Message-----
From: ncp...@li...
[mailto:ncp...@li...] On Behalf Of Jeff Shumard -
DefenseWeb Technologies
Sent: woensdag 11 april 2007 23:30
To: General NCPL user support and discussion mailing list
Subject: Re: [ncpl-user] Export issues

The problem is in your Export.pm.  It is on your subroutine's for
isActiveServiceCheckEnabled and isPassiveServiceCheckEnabled.  I made
some changes to make it work but I am not sure if it will break
something else.


-----Original Message-----
From: ncp...@li...
[mailto:ncp...@li...] On Behalf Of Jeff
Shumard - DefenseWeb Technologies
Sent: Wednesday, April 11, 2007 1:42 PM
To: General NCPL user support and discussion mailing list
Subject: Re: [ncpl-user] Export issues

Here is some more information that I have found and I am going through
the code now to see if I can track down what the issue is.  This is
pulled from my apache error long.

Use of uninitialized value in concatenation (.) or string at
/usr/lib/perl5/site_perl/5.8.5/NCPL/Export.pm line 711

Thanks

-----Original Message-----
From: ncp...@li...
[mailto:ncp...@li...] On Behalf Of Jeff
Shumard - DefenseWeb Technologies
Sent: Tuesday, April 10, 2007 10:55 AM
To: ncp...@li...
Subject: [ncpl-user] Export issues

I have imported my configuration of an existing system into NCPL and
that worked just fine and I can see all my configurations are correct.
They are even setup correctly in the database.  When I export the
configuration that's when the problem happens.  The services.cfg file is
not being exported correctly.  There are no 1 or 0 being added to the
active_checks_enabled or passive_checks_enabled.  I have to manually
make the change to the file in order for this to work properly.

There are also a lot of options on the mail screen which are greyed out.
The main ones I am interested in are the "Main Configuration file", CGI
configuration file", "Service Dependencies", and "Service Excalations".
Is this something you are working on implementing anytime soon or is
that not going to be available for a while?

Thank you

------------------------------------------------------------------------
-
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share
your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDE
V
_______________________________________________
ncpl-user mailing list
ncp...@li...
https://lists.sourceforge.net/lists/listinfo/ncpl-user

------------------------------------------------------------------------
-
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share
your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDE
V
_______________________________________________
ncpl-user mailing list
ncp...@li...
https://lists.sourceforge.net/lists/listinfo/ncpl-user

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
ncpl-user mailing list
ncp...@li...
https://lists.sourceforge.net/lists/listinfo/ncpl-user



-- 
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.446 / Virus Database: 269.0.0/754 - Release Date: 09-04-2007
22:59

Re: [ncpl-user] Export issues

[Yves V. d. H. <yv...@us...>]

Hi,

This is a known bug
(https://sourceforge.net/tracker/index.php?func=detail&aid=1508644&group_id=
132836&atid=725755) and will be fixed asap.

Kind regards,
Yves

-----Original Message-----
From: ncp...@li...
[mailto:ncp...@li...] On Behalf Of Jeff Shumard -
DefenseWeb Technologies
Sent: donderdag 12 april 2007 00:27
To: General NCPL user support and discussion mailing list
Subject: Re: [ncpl-user] Export issues

After looking further into the Export.pm, there are a couple of other
things which I am not sure why you are doing.  I appreciate the work
that you have done, I am just trying to make sure if what you are doing
is what you want.  I see you are not putting options into the
configuration files if the value is 0.  If the value is zero then it is
probably better to still output that to the configuration file so the
default configuration in the nagios.cfg file is not taken.  There are
some systems that I don't want services activated on and some that I do.
If the default is to have it activated then it gets overridden by me
flagging it as off and it's turned on by my global config.  I have
changed the module to print it no matter if it's zero or not.  Just
thought I would point that out.

Thanks

----------------------------------

-----Original Message-----
From: ncp...@li...
[mailto:ncp...@li...] On Behalf Of Jeff
Shumard - DefenseWeb Technologies
Sent: Wednesday, April 11, 2007 2:30 PM
To: General NCPL user support and discussion mailing list
Subject: Re: [ncpl-user] Export issues

The problem is in your Export.pm.  It is on your subroutine's for
isActiveServiceCheckEnabled and isPassiveServiceCheckEnabled.  I made
some changes to make it work but I am not sure if it will break
something else.


-----Original Message-----
From: ncp...@li...
[mailto:ncp...@li...] On Behalf Of Jeff
Shumard - DefenseWeb Technologies
Sent: Wednesday, April 11, 2007 1:42 PM
To: General NCPL user support and discussion mailing list
Subject: Re: [ncpl-user] Export issues

Here is some more information that I have found and I am going through
the code now to see if I can track down what the issue is.  This is
pulled from my apache error long.

Use of uninitialized value in concatenation (.) or string at
/usr/lib/perl5/site_perl/5.8.5/NCPL/Export.pm line 711

Thanks

-----Original Message-----
From: ncp...@li...
[mailto:ncp...@li...] On Behalf Of Jeff
Shumard - DefenseWeb Technologies
Sent: Tuesday, April 10, 2007 10:55 AM
To: ncp...@li...
Subject: [ncpl-user] Export issues

I have imported my configuration of an existing system into NCPL and
that worked just fine and I can see all my configurations are correct.
They are even setup correctly in the database.  When I export the
configuration that's when the problem happens.  The services.cfg file is
not being exported correctly.  There are no 1 or 0 being added to the
active_checks_enabled or passive_checks_enabled.  I have to manually
make the change to the file in order for this to work properly.

There are also a lot of options on the mail screen which are greyed out.
The main ones I am interested in are the "Main Configuration file", CGI
configuration file", "Service Dependencies", and "Service Excalations".
Is this something you are working on implementing anytime soon or is
that not going to be available for a while?

Thank you

------------------------------------------------------------------------
-
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share
your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDE
V
_______________________________________________
ncpl-user mailing list
ncp...@li...
https://lists.sourceforge.net/lists/listinfo/ncpl-user

------------------------------------------------------------------------
-
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share
your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDE
V
_______________________________________________
ncpl-user mailing list
ncp...@li...
https://lists.sourceforge.net/lists/listinfo/ncpl-user

------------------------------------------------------------------------
-
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share
your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDE
V
_______________________________________________
ncpl-user mailing list
ncp...@li...
https://lists.sourceforge.net/lists/listinfo/ncpl-user

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
ncpl-user mailing list
ncp...@li...
https://lists.sourceforge.net/lists/listinfo/ncpl-user



-- 
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.446 / Virus Database: 269.0.0/754 - Release Date: 09-04-2007
22:59

Re: [ncpl-user] Export issues

[Jeff S. - D. T. <jef...@de...>]

After looking further into the Export.pm, there are a couple of other
things which I am not sure why you are doing.  I appreciate the work
that you have done, I am just trying to make sure if what you are doing
is what you want.  I see you are not putting options into the
configuration files if the value is 0.  If the value is zero then it is
probably better to still output that to the configuration file so the
default configuration in the nagios.cfg file is not taken.  There are
some systems that I don't want services activated on and some that I do.
If the default is to have it activated then it gets overridden by me
flagging it as off and it's turned on by my global config.  I have
changed the module to print it no matter if it's zero or not.  Just
thought I would point that out.

Thanks

----------------------------------

-----Original Message-----
From: ncp...@li...
[mailto:ncp...@li...] On Behalf Of Jeff
Shumard - DefenseWeb Technologies
Sent: Wednesday, April 11, 2007 2:30 PM
To: General NCPL user support and discussion mailing list
Subject: Re: [ncpl-user] Export issues

The problem is in your Export.pm.  It is on your subroutine's for
isActiveServiceCheckEnabled and isPassiveServiceCheckEnabled.  I made
some changes to make it work but I am not sure if it will break
something else.


-----Original Message-----
From: ncp...@li...
[mailto:ncp...@li...] On Behalf Of Jeff
Shumard - DefenseWeb Technologies
Sent: Wednesday, April 11, 2007 1:42 PM
To: General NCPL user support and discussion mailing list
Subject: Re: [ncpl-user] Export issues

Here is some more information that I have found and I am going through
the code now to see if I can track down what the issue is.  This is
pulled from my apache error long.

Use of uninitialized value in concatenation (.) or string at
/usr/lib/perl5/site_perl/5.8.5/NCPL/Export.pm line 711

Thanks

-----Original Message-----
From: ncp...@li...
[mailto:ncp...@li...] On Behalf Of Jeff
Shumard - DefenseWeb Technologies
Sent: Tuesday, April 10, 2007 10:55 AM
To: ncp...@li...
Subject: [ncpl-user] Export issues

I have imported my configuration of an existing system into NCPL and
that worked just fine and I can see all my configurations are correct.
They are even setup correctly in the database.  When I export the
configuration that's when the problem happens.  The services.cfg file is
not being exported correctly.  There are no 1 or 0 being added to the
active_checks_enabled or passive_checks_enabled.  I have to manually
make the change to the file in order for this to work properly.

There are also a lot of options on the mail screen which are greyed out.
The main ones I am interested in are the "Main Configuration file", CGI
configuration file", "Service Dependencies", and "Service Excalations".
Is this something you are working on implementing anytime soon or is
that not going to be available for a while?

Thank you

------------------------------------------------------------------------
-
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share
your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=3Djoin.php&p=3Dsourceforge&CID=3D=
DEVDE
V
_______________________________________________
ncpl-user mailing list
ncp...@li...
https://lists.sourceforge.net/lists/listinfo/ncpl-user

------------------------------------------------------------------------
-
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share
your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=3Djoin.php&p=3Dsourceforge&CID=3D=
DEVDE
V
_______________________________________________
ncpl-user mailing list
ncp...@li...
https://lists.sourceforge.net/lists/listinfo/ncpl-user

------------------------------------------------------------------------
-
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share
your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=3Djoin.php&p=3Dsourceforge&CID=3D=
DEVDE
V
_______________________________________________
ncpl-user mailing list
ncp...@li...
https://lists.sourceforge.net/lists/listinfo/ncpl-user

Re: [ncpl-user] Export issues

[Jeff S. - D. T. <jef...@de...>]

The problem is in your Export.pm.  It is on your subroutine's for
isActiveServiceCheckEnabled and isPassiveServiceCheckEnabled.  I made
some changes to make it work but I am not sure if it will break
something else.


-----Original Message-----
From: ncp...@li...
[mailto:ncp...@li...] On Behalf Of Jeff
Shumard - DefenseWeb Technologies
Sent: Wednesday, April 11, 2007 1:42 PM
To: General NCPL user support and discussion mailing list
Subject: Re: [ncpl-user] Export issues

Here is some more information that I have found and I am going through
the code now to see if I can track down what the issue is.  This is
pulled from my apache error long.

Use of uninitialized value in concatenation (.) or string at
/usr/lib/perl5/site_perl/5.8.5/NCPL/Export.pm line 711

Thanks

-----Original Message-----
From: ncp...@li...
[mailto:ncp...@li...] On Behalf Of Jeff
Shumard - DefenseWeb Technologies
Sent: Tuesday, April 10, 2007 10:55 AM
To: ncp...@li...
Subject: [ncpl-user] Export issues

I have imported my configuration of an existing system into NCPL and
that worked just fine and I can see all my configurations are correct.
They are even setup correctly in the database.  When I export the
configuration that's when the problem happens.  The services.cfg file is
not being exported correctly.  There are no 1 or 0 being added to the
active_checks_enabled or passive_checks_enabled.  I have to manually
make the change to the file in order for this to work properly.

There are also a lot of options on the mail screen which are greyed out.
The main ones I am interested in are the "Main Configuration file", CGI
configuration file", "Service Dependencies", and "Service Excalations".
Is this something you are working on implementing anytime soon or is
that not going to be available for a while?

Thank you

------------------------------------------------------------------------
-
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share
your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=3Djoin.php&p=3Dsourceforge&CID=3D=
DEVDE
V
_______________________________________________
ncpl-user mailing list
ncp...@li...
https://lists.sourceforge.net/lists/listinfo/ncpl-user

------------------------------------------------------------------------
-
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share
your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=3Djoin.php&p=3Dsourceforge&CID=3D=
DEVDE
V
_______________________________________________
ncpl-user mailing list
ncp...@li...
https://lists.sourceforge.net/lists/listinfo/ncpl-user