Hello(again)... new issue, it's been around for awhile, but it hasn't been an issue until qpage started getting called alot more.
Here's the debug information:
nagios log # ncidd -DDv
Configured to send 'cidlog' to clients.
Configured to send 'cidinfo' to clients.
Processed config file: /etc/ncid/ncidd.conf
Processed alias file: /etc/ncid/ncidd.alias
CID logfile: /var/log/cidcall.log
Data logfile: /var/log/ciddata.log
TTY port opened: /dev/ttyS14
TTY port speed: 19200
TTY lock file: /var/lock/subsys/qpage/LCK..ttyS14
TTY port control signals enabled
AT Z S0=0 E1 V1 Q0
OK
Modem initialized.
AT+VCID=1
OK
Modem set for CallerID.
MSG: Started 04/06/2006 01:42
Sent call log: /var/log/cidcall.log
ÛÃoîîectioî to ±0.·6.±.²±5 cloóeä âù foreiçî èoótÝNo modem found: /dev/ttyS14
--- end ---
/dev/ttyS14 is there, and the lockfile gets placed. I've checked file permissions, and those are right. Nothing else is in /var/log/cidcall.log, or any other file.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hello(again)... new issue, it's been around for awhile, but it hasn't been an issue until qpage started getting called alot more.
Here's the debug information:
nagios log # ncidd -DDv
Configured to send 'cidlog' to clients.
Configured to send 'cidinfo' to clients.
Processed config file: /etc/ncid/ncidd.conf
Processed alias file: /etc/ncid/ncidd.alias
CID logfile: /var/log/cidcall.log
Data logfile: /var/log/ciddata.log
TTY port opened: /dev/ttyS14
TTY port speed: 19200
TTY lock file: /var/lock/subsys/qpage/LCK..ttyS14
TTY port control signals enabled
AT Z S0=0 E1 V1 Q0
OK
Modem initialized.
AT+VCID=1
OK
Modem set for CallerID.
MSG: Started 04/06/2006 01:42
Sent call log: /var/log/cidcall.log
ÛÃoîîectioî to ±0.·6.±.²±5 cloóeä âù foreiçî èoótÝNo modem found: /dev/ttyS14
--- end ---
/dev/ttyS14 is there, and the lockfile gets placed. I've checked file permissions, and those are right. Nothing else is in /var/log/cidcall.log, or any other file.
The next release of NCID, version 0.63 should fix this.