NabaztagLives has been tested on the Raspberry Pi "Wheezy" (NOOBS) distribution, the Jessie distribution, and has the following dependencies:
The first release used the following versions:
Installation
The easiest way to install NabaztagLives on your Raspberry Pi is to use the installer from a Terminal window:
git clone git://git.code.sf.net/p/nabaztaglives/code NabaztagLives cd NabaztagLives/install sudo ./install.sh
Updating
If you want to update your installation to the latest version, you can use the -nodb switch to preserve your rabbit's settings:
sudo rm -R NabaztagLives git clone git://git.code.sf.net/p/nabaztaglives/code NabaztagLives cd NabaztagLives/install sudo ./install.sh -nodb
Below are legacy instructions.
You can install them on your Raspberry Pi by running the commands below. When you install MySql, it will prompt you for a root password. You'll need that to setup the database.
sudo apt-get update sudo apt-get upgrade sudo apt-get install apache2 php5 php5-curl libapache2-mod-php5 sudo apt-get install mysql-server mysql-client php5-mysql sudo apt-get install lame sudo apt-get install mp3wrap
When you install Apache, it may kick out an error that says Could not reliably determine the server's fully qualified domain name. You can fix this by setting the server's name to localhost:
sudo vi /etc/apache2/apache2.conf
Scroll to the end of the file and insert:
ServerName localhost
If you have a V1 rabbit, you'll need to set the override. For Pi 3, see note below.
sudo vi /etc/apache2/sites-enabled/000-default
Change the AllowOverride to All so it looks like this:
<Directory /var/www/> Options -Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory>
On Raspberry Pi3, and quite possibly the newer distros for Pi2, the apache config has changed:
sudo vi /etc/apache2/sites-enabled/000-default.conf
Change the AllowOverride to All so it looks like this:
<Directory /var/www/> Options -Indexes +FollowSymLinks +MultiViews AllowOverride All Order allow,deny allow from all </Directory>
Save the file and exit.
Then do:
sudo apachectl restart
The easiest way to get setup is to use git to get the latest code:
git clone git://git.code.sf.net/p/nabaztaglives/code NabaztagLives
This will create a folder named NabaztagLives on your Pi. Navigate to that folder:
cd NabaztagLives
The solution is designed to run from a dedicated Pi and is installed to the root folder of the website. If you install it to another location, the relative paths will be broken and it will not work. Copy the contents of the www directory to the root of your Pi's web server which is /var/www. Note the instructions below were made before the apache www dir was moved to /var/www/html in more recent releases of Debian which is what Raspbian is based on, so you'll want to verify first that you have a /var/www/html on your Pi, and if so copy the www content there. If you just have /var/www then you can run the command below:
sudo cp -R www /var
Otherwise:
cd www sudo cp -R * /var/www/html
Next open the db folder on your Pi and build the database. Enter your MySql root password when prompted:
cd db sudo ./db_setup.sh
Next we need to move the db info file to the right place. This is also where the logging occurs. Go back up one folder to the root folder where you placed the code (where etc exists) and execute the following:
cd .. sudo cp -R ./etc /var
Next we need to set some ownership properties or our rabbit will be very quiet:
sudo chown www-data:www-data /var/www/vl/hutch
Or depending on distro:
sudo chown www-data:www-data /var/www/html/vl/hutch sudo chown www-data:www-data /var/etc
Now we need to remove the default "It Works!" index page from apache:
sudo rm /var/www/index.html
Or depending on distro:
sudo rm /var/www/html/index.html
Almost done! Get your IP address:
ifconfig | grep addr
You should get an IP that starts with 192. Open a browser and browse to that address. If you are on your Pi you can also type in localhost for the address. The site should be displayed. If you didn't get an IP that means your wifi is hosed and I don't know how you got this far. If you just see a folder called www then you need to set your AllowOverride (see above).
For later distros, we need to fix the now broken relative paths (until future code update):
cd /var/www/html sudo find . -name '*.php' -type f -exec sed -i 's/..\/etc\//\/var\/etc\//g' {} + sudo find . -name '*.php' -type f -exec sed -i 's/..\/\/var\/etc/\/var\/etc/g' {} +
If you see this on the home page then you need to change the IP addresses in /var/www/locate.jsp or /var/www/html/locate.jsp (depending on the distro) to your server's IP address (the one displayed at the bottom of the page).
You're finished! All you need to do now is setup your rabbit. If you need help with that, click on the Setup Info button on the NabaztagLives website that's now running on your Pi. When you're done, be sure and click the "Update Rabbit" button to see all the features.
That's what I said! Check the error log, there's a button for it on the site. Click "reset" to reset it. Make sure you have setup your rabbit to do things! Set the idle behavior to PacMan Lights so you don't have to wait to see if it works.
Another good thing to check is the PHP log:
cat /var/log/apache2/error.log
You can always post to the forum at https://sourceforge.net/p/nabaztaglives/discussion/brokenrabbit/.
If you are setting up your Raspberry Pi for the first time, you can get instructions from http://www.raspberrypi.org/wp-content/uploads/2012/04/quick-start-guide-v2_1.pdf.
I used the NOOBS image and deleted all but the "Wheezy" files before copying it to the SD card. That saves room and speeds the installation assuming you don't intend to run the other distros.
I recommend a 4 GB class 10 SD card from a name brand like Sandisk. The Model B has a 25 MB/s max write speed so you want something that can write that fast. Always check to see if your equipment is supported by checking to see if it works first by going to http://elinux.org/RPi_VerifiedPeripherals.
Just remember that if you want to make a backup of the SD card, you will need whatever size card you have available on your machine. So if you have a 16 GB card, you will need 16 GB free space on your drive. NabaztagLives consumes less than 100 MB.
startx
Set the locale and straighten out the keyboard
sudo raspi-config
lsusb
wpa_passphrase Your-Wifi-SSID Your-Password sudo vi /etc/network/interfaces
Make it look like this:
auto lo iface lo inet loopback iface eth0 inet dhcp auto wlan0 allow-hotplug wlan0 iface wlan0 inet dhcp wpa-scan-ssid 1 wpa-ap-scan 1 wpa-key-mgmt WPA-PSK wpa-proto RSN WPA wpa-pairwise CCMP TKIP wpa-group CCMP TKIP wpa-ssid "Your Wifi SSID" wpa-psk Your-PSK-Value-that-you-got-from-running-wpa_passphrase iface default inet dhcp
sudo dpkg-reconfigure tzdata
sudo reboot
sudo shutdown -h now
sudo vi /etc/inittab
Find the following line:
1:2345:respawn:/sbin/getty 115200 tty1
And change to:
1:2345:respawn:/bin/login -f pi tty1 </dev/tty1 >/dev/tty1 2>&1
vcgencmd measure_temp
mysql rabbit -u root -p