Can't find the src directory

[Kurt R Lanes]

I downloaded the mysqmplus-firmware-127-07.zip but I can't fine the src folder to install the custom libraries. What am I missing?

Thanks
Kurt

[elythomaslumber]

Hi Kurt,
Robert will answer but I have checked and found the libraries ("required" and "other") in the old zip-file of 122-4. As I remember I did not add or change them until the current release.

However the last release which was working for me was the 127-4. The current 127-7 has a problem with the LUX sensor. It is found by the running SW but I get only static values. Maybe only a local problem for me.

Cheers
Hardy

[Kurt R Lanes]

Thanks Hardy

That compiled. I would like to discuss something that is off-topic.

I don’t know if you are failure with Weatherflow’s Tempest System. It is a Solar Powered Weather Station with ultrasonic anemometer in a compact pole mount system. I attached an image.
https://sales.weatherflow.com/brand/?utm_term=weatherflow&utm_campaign=RM+%7C+New+Acquisition+%7C+Search+%7C+Brand+%7C+WW&utm_source=adwords&utm_medium=ppc&hsa_acc=8776118551&hsa_cam=10190198338&hsa_grp=104755728951&hsa_ad=534505420727&hsa_src=g&hsa_tgt=kwd-295056737686&hsa_kw=weatherflow&hsa_mt=e&hsa_net=adwords&hsa_ver=3&gclid=CjwKCAiAvaGRBhBlEiwAiY-yMPyt5XFB-Bd0hUiNcaIfv68cyf1ROh_Rph3bsnlcc4P_k63__H6uYxoCylsQAvD_BwE#lp-pom-block-915

I have one of these and it has almost every sensor you can imagine including LUX and UV. It has a simple REST API that I wrote a simple ESP routine to access. What I am entered in is seeing if I can adapt your code to include this as an option that eliminates all the sensors. I plan to add a 32x24 thermal IR sensor (THERMAL CAMERA UNIT MLX90640) to estimate the percent cloud cover and and RG-11 for dew and rain sensing because the WeatherFlow is not good at detecting snow or mist. Would you support doing this? It would make it easier than reverse engineering your code.

I am very new to Window’s based Astrophotography systems having used KSTARS so there is much about ASCOM that I don’t understand. I would like to include a simple ROR controller and Safety monitor in the this development. Do you know if it is possible to have all these functions in one unit. It seems like NINA sees these as separate devices.

Thanks

Kurt

On Mar 9, 2022, at 1:04 AM, elythomaslumber elythomaslumber@users.sourceforge.net wrote:

Hi Kurt,
Robert will answer but I have checked and found the libraries ("required" and "other") in the old zip-file of 122-4. As I remember I did not add or change them until the current release.

However the last release which was working for me was the 127-4. The current 127-7 has a problem with the LUX sensor. It is found by the running SW but I get only static values. Maybe only a local problem for me.

Cheers
Hardy

Attachments:

• mySQMPLUS-Firmware-122-4.zip (13.7 MB; application/x-zip-compressed)
Can't find the src directory

Sent from sourceforge.net because you indicated interest in https://sourceforge.net/p/mysqmproesp32/discussion/general/

To unsubscribe from further messages, please visit https://sourceforge.net/auth/subscriptions/

[brownrb]

I have uploaded the libraries into
https://sourceforge.net/projects/mysqmproesp32/files/FIRMWARE/

I am not aware that there was an issue re TSL2591 with 127-07. The reports I have are all positive (no issues were found). Not saying that there might be something wrong - the sensor can take minutes to balance out as the code works its magic with that sensor, before the readings come through.

You can try this test program which is based on the 127-07 release.

regards
Robert

[elythomaslumber]

Hi Robert,
thanks again from my side. I will check with the complete 127-07 again firstly. I did not wait very long, not some minutes....
Cheers
Hardy