Problem compiling firmware

ESP32 mySQM+ Sky-Meter/Weather Station with loads of features

Brought to you by: brownrb

Problem compiling firmware

Forum: General Discussion

Creator: Marco Formenton

Created: 2022-02-24

Updated: 2022-11-30

Marco Formenton - 2022-02-24

Hello,
I always get this error while compiling the SQM+ with FW127-04:
operation on 'rtc_loc.tm::tm_wday' may be undefined [-Werror=sequence-point]

I can't understand what goes wrong, can someone help me?

I attach the error log

Thankyou

Marco

Last edit: Marco Formenton 2022-02-24

2022-02-24_11h03_18.png

error_rtc_loc.txt

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

brownrb - 2022-02-24

I cannot reproduce that
Please upgrade to Arduino 1.8.19 offline version (not the web based one)
Please do a snapshot of your Arduino File Preferences window and post it here
Please post your controllerconfig.h file - DELETE ANY SSID/PASSWORD INFO FIRST

my preferences is attached

and
please check your version of the Arduino ESP32 core - it would be under board manager, you should be running at lease 2.0.2 see attached

Last edit: brownrb 2022-02-24

board-manager.png

preferences.png

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

elythomaslumber - 2022-02-25

Did also the Update from 1.8.10 to 1.8.19... unfortunately you will loose the "ESP 32 Sketch data upload" entry. So you have to reinstall it....

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

XIANG - 2022-11-29

Make sure your ESP32 version is 2.0.2

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

brownrb - 2022-11-30

I think the latest ESP32 Core for arduino is 2.0.5

Not to be confused with the Arduino Software IDE version, 2.0.2
I am still using 1.8.19 rto upload the data sketch files

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Log in to post a comment.