thanks for the project, thanks for the updates too.
Quick question, is there any chance to have the boltwood/CSII file to specify if the sky is clear, cloudy or very cloudy by the original boltwood format? 1=Clear, 2=Cloudy 3=Very cloudy
I would say that anything in between 25% and 50% could be called cloudy, Anything above would be very cloudy.
Thanks for all.
Miguel
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
thanks. I did try it but I got an error while trying to connect - door is closed- I made sure that the door on the firmware and on the windows app matched.
I then upgraded the firmware to the latest released a couple of hours ago and installed the windows app v17, problem remains. Any clue to try and fix this? I went to see if firewall was blocking it, negative on that.
EDIT: I just tried to connect with a former TCP/IP app for windows (v45) that I have on another computer and it works. Go figure...
Thanks
Miguel
Last edit: molino 2021-06-06
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
The change for skystate was only changed recently in firmware is 119-5
The latest Window application that supports this is mySQMPLUS_0_0_0_17
After programming the firmware remember to upload the sketch data files
Please use these, After starting the windows app, enable error logging (on the Logging tab) and after the connection fails send me the errorlog file and the focuserconfig.h file
my email address is line 43 of the firmware file.
Cheers
Robert
Last edit: brownrb 2021-06-07
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hey Robert,
thanks for the project, thanks for the updates too.
Quick question, is there any chance to have the boltwood/CSII file to specify if the sky is clear, cloudy or very cloudy by the original boltwood format? 1=Clear, 2=Cloudy 3=Very cloudy
I would say that anything in between 25% and 50% could be called cloudy, Anything above would be very cloudy.
Thanks for all.
Miguel
Hi
Please try the attached Windows Application
1=Clear= <25%
2-Cloudy= >=25% to < 50%
3=VeryCloudy= >=50^ to 100%
Let me know if this does the job.
Cheers
Robert
Robert,
thanks. I did try it but I got an error while trying to connect - door is closed- I made sure that the door on the firmware and on the windows app matched.
I then upgraded the firmware to the latest released a couple of hours ago and installed the windows app v17, problem remains. Any clue to try and fix this? I went to see if firewall was blocking it, negative on that.
EDIT: I just tried to connect with a former TCP/IP app for windows (v45) that I have on another computer and it works. Go figure...
Thanks
Miguel
Last edit: molino 2021-06-06
The change for skystate was only changed recently in firmware is 119-5
The latest Window application that supports this is mySQMPLUS_0_0_0_17
After programming the firmware remember to upload the sketch data files
Please use these, After starting the windows app, enable error logging (on the Logging tab) and after the connection fails send me the errorlog file and the focuserconfig.h file
my email address is line 43 of the firmware file.
Cheers
Robert
Last edit: brownrb 2021-06-07
try the latest windows app v18
Robert,
I only had the chance to test it yesterday! Thanks for the flexibility, all works good!
Best
Miguel