I'm facing an issue when trying to connect the mySQM to Sequence Generator Pro. It doens't update the values depending on the configuration.
I use it a a Environtment device, choosing the ASCOM Observing Conditions driver, as you suggest in the manual.
I configure the Observing Conditions Hub as follows
Trace on - Checked
Include debug trace - Checked
Connect to drivers - Checked
Average Period:
Minutes=0.1
Number of readings = 2
Override IU safety limits - Unchecked
With this settings, if I connect:
Cloud Cover
Pressure
Sky Brightness
Sky Quality
Sky Temperature
Temperature
...it works fine. It retrieved the data and updates as expected.
But if I include also
Humidity
Dewpoint
...then it retrieves the initial values, but doesn't updates anymore.
Any thoughs on how to fix this?
In addition, I have no chance to connect the rain sensor as in the Observing Conditions Hub only appears Rain Rate, that when linked to the OBSCON: mySQM+USB ASCOM driver, the sensor description claims "Wind Direction, 0=North"
It is possible also to include the rain sensor as a Rain Rate (maybe forcing it to map values as No=0 and Yes= some non zero value) to be able to tell SGP to abort the sequence? (and eventually control an observatory shutter).
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi Robert,
I'm facing an issue when trying to connect the mySQM to Sequence Generator Pro. It doens't update the values depending on the configuration.
I use it a a Environtment device, choosing the ASCOM Observing Conditions driver, as you suggest in the manual.
I configure the Observing Conditions Hub as follows
Trace on - Checked
Include debug trace - Checked
Connect to drivers - Checked
Average Period:
Minutes=0.1
Number of readings = 2
Override IU safety limits - Unchecked
With this settings, if I connect:
Cloud Cover
Pressure
Sky Brightness
Sky Quality
Sky Temperature
Temperature
...it works fine. It retrieved the data and updates as expected.
But if I include also
Humidity
Dewpoint
...then it retrieves the initial values, but doesn't updates anymore.
Any thoughs on how to fix this?
In addition, I have no chance to connect the rain sensor as in the Observing Conditions Hub only appears Rain Rate, that when linked to the OBSCON: mySQM+USB ASCOM driver, the sensor description claims "Wind Direction, 0=North"
It is possible also to include the rain sensor as a Rain Rate (maybe forcing it to map values as No=0 and Yes= some non zero value) to be able to tell SGP to abort the sequence? (and eventually control an observatory shutter).