Hi
I had a great imaging session with the MyFP2ESP running on my modified ESP8266 with an external antenna. the home made dipole improved my RF signal by 10-15 decibels and I had no drop of the connection in station mode. auto focus in NINA worked great with this setup - thanks again for your assistance!
Two questions:
1) I need to reverse focuser direction. but the check box in the windows myFP2ESP app does not change direction (with the same rig attached to an arduino nano - the my focuserpro2 app works as expected and reverses direction.
2) in the data_per.jsn file. I can see "rdirection": change from 0 to 1 but the focuser continues in the same direction.
Edit: I found the answer that this file holds the focuser settings can can be saved and uploaded after firmware using save settings.
thank you
Al
Last edit: Al ros 2020-12-31
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Please download and try out v137 in the Firmware folder here. Let me know if there are still issues.
I have paused work on github for the time being - too many rev's behind
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi
I had a great imaging session with the MyFP2ESP running on my modified ESP8266 with an external antenna. the home made dipole improved my RF signal by 10-15 decibels and I had no drop of the connection in station mode. auto focus in NINA worked great with this setup - thanks again for your assistance!
Two questions:
1) I need to reverse focuser direction. but the check box in the windows myFP2ESP app does not change direction (with the same rig attached to an arduino nano - the my focuserpro2 app works as expected and reverses direction.
2) in the data_per.jsn file. I can see "rdirection": change from 0 to 1 but the focuser continues in the same direction.
Edit: I found the answer that this file holds the focuser settings can can be saved and uploaded after firmware using save settings.
thank you
Al
Last edit: Al ros 2020-12-31
Please download and try out v137 in the Firmware folder here. Let me know if there are still issues.
I have paused work on github for the time being - too many rev's behind