Hello all
After researching options for a DYI electronic focuser I came to this project and found it very nice. As i had a few ESP32 dev boards lying around, i decided to use one to build an unit for me, but I noticed the project used the mini version while i had the 38 pin dev board. So i created the PCB below which is compatible wit the code and implement a few features like manual buttons and a Display. Just want to share back with the comunity. Let me know if it's useful!
Hello all
After researching options for a DYI electronic focuser I came to this project and found it very nice. As i had a few ESP32 dev boards lying around, i decided to use one to build an unit for me, but I noticed the project used the mini version while i had the 38 pin dev board. So i created the PCB below which is compatible wit the code and implement a few features like manual buttons and a Display. Just want to share back with the comunity. Let me know if it's useful!
https://easyeda.com/editor#id=bf06ae1fd13d47648285ccd6621e7b49
That is very generous of you, thanks.
But the link is just completely empty for me, perhaps it only works on your account?
Oh I will take a look at that. It's the first time i'm sharing something
from EasyEDA and the process is a bit confusing.
thanks for letting me know
Guilherme
On Thu, Dec 3, 2020 at 3:10 AM brownrb brownrb@users.sourceforge.net
wrote:
Hi
Seems this link works better, you will need to click in Open in Editor to
see the project:
https://easyeda.com/venere/myfocuser2_2side
Let me know if it works
Guilherme
On Thu, Dec 3, 2020 at 6:46 AM Guilherme Vênere venere@gmail.com wrote:
Yes, now I see, well done, cool!