---------- Forwarded message ---------
De: Carlos Izquierdo izquierdovazquez@gmail.com
Date: vie, 29 mar 2024 a las 20:32
Subject: myfocusr ESP32
To: brownrb brownrb@users.sourceforge.net
PD Adjunto una captura de pantalla indicando que tampoco puede acceder al
servicio web
Hi
Sorry your posts needed to be moderated (I have no idea why)
I see that from your post that the controller is always failing around the same issue, no reply in response to a get ismoving command from the Windows app.
The problem is that when I press it to move, the steps don't change and it
disconnects. what could happen?
When you say "I press it to move" my question is "How" - what are you doing to move the motor.
If that from a Windows application,, or web page or ascom? or using a push button or joystick
because there are many ways to move the motor.
Regards
Robert
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hello Robert
I sent a reply to Carlos issue yesterday. But it seems to be lost somewhere in the web.
Best regards
Eric
Envoyé à partir de Courrier pour Windows
De : brownrb
Envoyé le :mardi 2 avril 2024 19:07
À : [myfocuserpro2-esp32:discussion]
Objet :[myfocuserpro2-esp32:discussion] Fwd: myfocusr ESP32
Hi
Sorry your posts needed to be moderated (I have no idea why)
I see that from your post that the controller is always failing around the same issue, no reply in response to a get ismoving command from the Windows app.
The problem is that when I press it to move, the steps don't change and it
disconnects. what could happen?
When you say "I press it to move" my question is "How" - what are you doing to move the motor.
If that from a Windows application,, or web page or ascom? or using a push button or joystick
because there are many ways to move the motor.
Regards
Robert
---------- Forwarded message ---------
De: Carlos Izquierdo izquierdovazquez@gmail.com
Date: vie, 29 mar 2024 a las 20:32
Subject: myfocusr ESP32
To: brownrb brownrb@users.sourceforge.net
Good night.
After, with your help, I managed to make the focuser work with a TMC2209
driver and with an Arduino pro micro, I have ventured to test your focuser
with the ESP32 version.
After doing 1000 tests I have managed to connect the ESP to the Windows
application and to NINA, both with a static IP and with an access point.
The problem is that when I press it to move, the steps don't change and it
disconnects. what could happen?
Thanks for everything!!!
I send you the two firmwares (static IP and access point) and the log of
the windows application
myfp2esp32-firmware-311- (accespoint).zip
https://drive.google.com/file/d/1pDEvMwGEkNxiLLivP8FkpVruZLkqLojW/view?usp=drive_web
myfp2esp32-firmware-311- (Static ip).zip
https://drive.google.com/file/d/10damrzxyZ7jmtN4cJM_50CeG189zsRy7/view?usp=drive_web
myFP2ESP32-Log-29032024.txt
https://drive.google.com/file/d/1nVnhM5qagFubi7orKzwCcee5HSz8-s0K/view?usp=drive_web
---------- Forwarded message ---------
De: Carlos Izquierdo izquierdovazquez@gmail.com
Date: vie, 29 mar 2024 a las 21:06
Subject: Fwd: myfocusr ESP32
To: general@discussion.myfocuserpro2-esp32.p.re.sourceforge.net general@discussion.myfocuserpro2-esp32.p.re.sourceforge.net
---------- Forwarded message ---------
De: Carlos Izquierdo izquierdovazquez@gmail.com
Date: vie, 29 mar 2024 a las 20:32
Subject: myfocusr ESP32
To: brownrb brownrb@users.sourceforge.net
PD Adjunto una captura de pantalla indicando que tampoco puede acceder al
servicio web
Good night.
After, with your help, I managed to make the focuser work with a TMC2209
driver and with an Arduino pro micro, I have ventured to test your focuser
with the ESP32 version.
After doing 1000 tests I have managed to connect the ESP to the Windows
application and to NINA, both with a static IP and with an access point.
The problem is that when I press it to move, the steps don't change and it
disconnects. what could happen?
Thanks for everything!!!
I send you the two firmwares (static IP and access point) and the log of
the windows application
myfp2esp32-firmware-311- (accespoint).zip
https://drive.google.com/file/d/1pDEvMwGEkNxiLLivP8FkpVruZLkqLojW/view?usp=drive_web
myfp2esp32-firmware-311- (Static ip).zip
https://drive.google.com/file/d/10damrzxyZ7jmtN4cJM_50CeG189zsRy7/view?usp=drive_web
myFP2ESP32-Log-29032024.txt
https://drive.google.com/file/d/1nVnhM5qagFubi7orKzwCcee5HSz8-s0K/view?usp=drive_web
Hi
Sorry your posts needed to be moderated (I have no idea why)
I see that from your post that the controller is always failing around the same issue, no reply in response to a get ismoving command from the Windows app.
When you say "I press it to move" my question is "How" - what are you doing to move the motor.
If that from a Windows application,, or web page or ascom? or using a push button or joystick
because there are many ways to move the motor.
Regards
Robert
Hello Robert
I sent a reply to Carlos issue yesterday. But it seems to be lost somewhere in the web.
Best regards
Eric
Envoyé à partir de Courrier pour Windows
De : brownrb
Envoyé le :mardi 2 avril 2024 19:07
À : [myfocuserpro2-esp32:discussion]
Objet :[myfocuserpro2-esp32:discussion] Fwd: myfocusr ESP32
Hi
Sorry your posts needed to be moderated (I have no idea why)
I see that from your post that the controller is always failing around the same issue, no reply in response to a get ismoving command from the Windows app.
The problem is that when I press it to move, the steps don't change and it
disconnects. what could happen?
When you say "I press it to move" my question is "How" - what are you doing to move the motor.
If that from a Windows application,, or web page or ascom? or using a push button or joystick
because there are many ways to move the motor.
Regards
Robert
Fwd: myfocusr ESP32
Sent from sourceforge.net because you indicated interest in https://sourceforge.net/p/myfocuserpro2-esp32/discussion/general/
To unsubscribe from further messages, please visit https://sourceforge.net/auth/subscriptions/
--
Cet e-mail a été vérifié par le logiciel antivirus d'Avast.
www.avast.com