Recent changes to Home

Home modified by Andy Modla

Andy Modla — Sun, 11 Dec 2022 16:30:00 -0000

--- v5
+++ v6
@@ -1,10 +1,10 @@
-The Multi Remote Camera app, for Android devices, takes photos and videos triggered remotely over a local WIFI network using broadcast messages. You can capture photos and videos nearly simultaneously on local network connected devices running this camera app. Depending on the type of local private network, the number of triggered devices can range from 1 to 253 or 4093 maximum.
+The Multi Remote Camera app, for Android camera devices, takes photos and videos triggered remotely over a local WIFI network using broadcast messages. You can capture photos and videos nearly simultaneously on local network connected devices running this camera app. Depending on the type of local private network, the number of triggered camera devices can range from 1 to 253 or 4093 maximum.

 For security reasons some Internet service provider's WIFI routers will block broadcast messages. The recommended security setup is to use your own private router that allows broadcast messaging and is NOT connected to the Internet.

 To use the app for remote trigger you need to enable WiFi Remote Control in Settings (Camera Controls). For privacy disable when not needed.

-Another app, WIFI Remote Capture , sends the broadcast control messages used to operate focus and shutter release on multiple devices. Download this app: https://play.google.com/store/apps/details?id=com.andymodla.remotecapture&hl=en
+Another Android app, WIFI Remote Capture , sends the broadcast control messages used to operate focus and shutter release on multiple devices. Download this app: https://play.google.com/store/apps/details?id=com.andymodla.remotecapture&hl=en
 You need this app to trigger the Multi Remote Camera running on devices connected to your local network.

 The Multi Remote Camera app has a built-in Web HTTP server you can enable for downloading your photos with a Web browser. It only works with your local network while the camera app is running. In Settings there is a option to turn on the HTTP Server option. For privacy disable when not needed. The Pairing QR Code shows the URL of the HTTP server as a QR code or text.

Home modified by Andy Modla

Andy Modla — Wed, 07 Dec 2022 02:17:16 -0000

--- v4
+++ v5
@@ -48,9 +48,6 @@
 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT-ABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.


-#Related
-Wiki: [Documentation]
-
 The wiki uses [Markdown](/p/multi-remote-camera/wiki/markdown_syntax/) syntax.

 [[members limit=20]]

Home modified by Andy Modla

Andy Modla — Wed, 07 Dec 2022 02:13:05 -0000

--- v3
+++ v4
@@ -17,8 +17,9 @@

 [Documentation]

+-----
 ###This app is NOT intended to violate others privacy. By installing the app, you agree NOT to violate the privacy of others.
-
+-----
 #Open Source Code Attribution
 The open source code for Multi Remote Camera is based on an Open Camera clone found at https://sourceforge.net/u/ajavamind/opencamera/ci/master/tree/

Home modified by Andy Modla

Andy Modla — Wed, 07 Dec 2022 02:11:15 -0000

--- v2
+++ v3
@@ -17,8 +17,9 @@

 [Documentation]

-This app is NOT intended to violate others privacy. By installing the app, you agree NOT to violate the privacy of others.
-Open Source Code Attribution
+###This app is NOT intended to violate others privacy. By installing the app, you agree NOT to violate the privacy of others.
+
+#Open Source Code Attribution
 The open source code for Multi Remote Camera is based on an Open Camera clone found at https://sourceforge.net/u/ajavamind/opencamera/ci/master/tree/

 The original Open Camera project written by Mark Harman is located at https://sourceforge.net/p/opencamera/code/ci/master/tree/
@@ -46,8 +47,8 @@
 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT-ABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.


-Related
-Wiki: Documentation
+#Related
+Wiki: [Documentation]

 The wiki uses [Markdown](/p/multi-remote-camera/wiki/markdown_syntax/) syntax.

Home modified by Andy Modla

Andy Modla — Wed, 07 Dec 2022 02:09:24 -0000

--- v1
+++ v2
@@ -1,6 +1,53 @@
-Welcome to your wiki!
+The Multi Remote Camera app, for Android devices, takes photos and videos triggered remotely over a local WIFI network using broadcast messages. You can capture photos and videos nearly simultaneously on local network connected devices running this camera app. Depending on the type of local private network, the number of triggered devices can range from 1 to 253 or 4093 maximum.

-This is the default page, edit it as you see fit. To add a new page simply reference it within brackets, e.g.: [SamplePage].
+For security reasons some Internet service provider's WIFI routers will block broadcast messages. The recommended security setup is to use your own private router that allows broadcast messaging and is NOT connected to the Internet.
+
+To use the app for remote trigger you need to enable WiFi Remote Control in Settings (Camera Controls). For privacy disable when not needed.
+
+Another app, WIFI Remote Capture , sends the broadcast control messages used to operate focus and shutter release on multiple devices. Download this app: https://play.google.com/store/apps/details?id=com.andymodla.remotecapture&hl=en
+You need this app to trigger the Multi Remote Camera running on devices connected to your local network.
+
+The Multi Remote Camera app has a built-in Web HTTP server you can enable for downloading your photos with a Web browser. It only works with your local network while the camera app is running. In Settings there is a option to turn on the HTTP Server option. For privacy disable when not needed. The Pairing QR Code shows the URL of the HTTP server as a QR code or text.
+
+The Multi Remote Camera app has photo and video filename suffix settings and Time/Number formats for filenames with an option to reset. Settings More camera controls... enter Save photo suffix, Save video suffix. The suffix string appended to the filename helps you determine from which device camera a photo or video was shot. This allows you to merge all the photos and videos from multiple cameras into a single folder for editing.
+
+You can also capture 3D images by taking sequential left and right eye photos by turning on 3D Capture Mode in Settings. Filenames will automatically add suffixes _l and _r.
+
+There is also an option to turn on wired USB mouse button control of the shutter and preview in Settings More camera controls... Mouse button capture .
+
+[Documentation]
+
+This app is NOT intended to violate others privacy. By installing the app, you agree NOT to violate the privacy of others.
+Open Source Code Attribution
+The open source code for Multi Remote Camera is based on an Open Camera clone found at https://sourceforge.net/u/ajavamind/opencamera/ci/master/tree/
+
+The original Open Camera project written by Mark Harman is located at https://sourceforge.net/p/opencamera/code/ci/master/tree/
+
+Released under the GPL v3 or later.
+
+Google ZXing ARCODE license:
+http://www.apache.org/licenses/LICENSE-2.0
+
+The Nanohttpd HTTP server is Copyright (c) 2012-2013 by Paul S. Hawke, 2001,2005-2013 by Jarno Elonen, 2010 by Konstantinos Togias All rights reserved.
+
+Use the HTTP server at your own risk.
+
+Network library for processing that supports the UDP protocol was written and copyright by Andreas Schlegel, GNU Lesser General Public License version 2.1. http://www.sojamo.de/libraries/oscP5
+Modifications to this code were made by Andy Modla.
+
+Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
+
+Redistribution of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
+
+Redistribution in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
+
+Neither the name of the NanoHttpd organization nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT-ABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+ 
+Related
+Wiki: Documentation

 The wiki uses [Markdown](/p/multi-remote-camera/wiki/markdown_syntax/) syntax.

Discussion for Home page

Andy Modla — Mon, 28 Nov 2022 02:31:16 -0000

The Multi Remote Camera app takes photos and videos triggered remotely over a local WIFI network using broadcast messages. You can capture photos and videos nearly simultaneously on local network connected devices running this camera app. Depending on the type of local private network, the number of triggered devices can range from 1 to 253 or 4093 maximum.

To use the app for remote trigger you must enable WIFI Remote Control in Settings.

For security reasons some Internet service provider's WIFI routers will block broadcast messages. The recommended security setup is to use your own private router that allows broadcast messaging and is not connected to the Internet.

Another app, WIFI Remote Capture , sends broadcast control messages to operate focus and shutter release on multiple devices. Download this app: https://play.google.com/store/apps/details?id=com.andymodla.remotecapture&hl=en
You need this app to trigger the Multi Remote Camera running on devices connected to your local network.

The Multi Remote Camera app has a built-in Web HTTP server you can enable for downloading your photos with a Web browser. It only works with your local network while the camera app is running. In Settings there is a option to turn on the HTTP server and to show the URL of the server as a QR code or text.

The Multi Remote Camera app has Settings under More Camera Controls for photo and video filename suffix and Time/Number format for filename with reset. The suffix string appended to the filename helps you determine from which device camera a photo was shot. This allows you to merge all the photos from multiple cameras into a single folder for editing.

You can also capture 3D images by taking sequential left and right eye photos when choosing a Settings option. The filenames will automatically add suffixes _l and _r.

The open source code for Multi Remote Camera is based on an Open Camera clone available at
https://sourceforge.net/u/ajavamind/opencamera/ci/master/tree/

Use the HTTP server at your own risk. The Nanohttpd HTTP server is
Copyright (c) 2012-2013 by Paul S. Hawke, 2001,2005-2013 by Jarno Elonen, 2010 by Konstantinos Togias All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.

Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

Neither the name of the NanoHttpd organization nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Home modified by Andy Modla

Andy Modla — Mon, 28 Nov 2022 02:27:33 -0000

Welcome to your wiki!

This is the default page, edit it as you see fit. To add a new page simply reference it within brackets, e.g.: [SamplePage].

The wiki uses Markdown syntax.

Project Members:

Andy Modla (admin)