Thread: [mpls-linux-general] mpls-linux

[mpls-linux-general] mpls-linux

From: rachid z. <rza...@gm...> - 2007-07-05 18:27:13

Hi
i have install  mpls-linux (1.950) in my fedora4
but when i type
 #mpls nhlfe change key 0x2 instructions push gen 10000 nexthop eth1 ipv4
10.0.0.2
i have this message:
RTNETLINK answers: Operation not permitted
when i type
 #mpls ilm add label gen 10000 labelspace 0
i have this message
RTNETLINK answers: Cannot allocate memory

what is the problem
thanks..

Re: [mpls-linux-general] mpls-linux

From: Marco S. <mar...@s2...> - 2007-07-05 19:14:05

Your problem is most likely solved by loading the mpls4 module before
trying to configure mpls-related things. Load it with 'modprobe mpls4',
if you haven't done so already.

> Hi
>  i have install=A0 mpls-linux (1.950)=A0in my fedora4
>  but when i type=A0=A0
>  =A0#mpls nhlfe change key 0x2 instructions push gen 10000 nexthop eth1 i=
pv4 10.0.0.2
>  i have this message:
>  RTNETLINK answers: Operation not permitted
>  when i type
>  =A0#mpls ilm add label gen 10000 labelspace 0
>  i have this message
>  RTNETLINK answers: Cannot allocate memory
>  =A0
>  what is the problem
>  thanks..
>  =20

--=20
Marco Schmidt
mailto:mar...@s2...

Re: [mpls-linux-general] mpls-linux

From: Marco S. <mar...@s2...> - 2007-07-05 20:09:31

You are using FC4, so you could install the kernel-RPM
(kernel-2.6.15-1.1831_FC4mpls_1.950.i686.rpm)

You may also upgrade to FC5 and install v1.955.

And don't forget to 'CC' the mailling-list :)

> thanks
>  after typing 'modprobe mpls4' i have
>  FATAL: Module mpls4 not found..
>  but i have already activate mpls in my kernel
>  i use "mpls-linux-docs_v1.950" documentation=A0 and i did all the steps.=
..
>  i have problem with english.. do you speak frensh Mr Marco

> =A0
>  2007/7/5, Marco Schmidt <mar...@s2...>:=20
> Your problem is most likely solved by loading the mpls4 module before
> trying to configure mpls-related things. Load it with 'modprobe mpls4',
> if you haven't done so already.

>> Hi
>>=A0=A0i have install mpls-linux (1.950)in my fedora4
>>=A0=A0but when i type
>>=A0=A0#mpls nhlfe change key 0x2 instructions push gen 10000 nexthop eth1=
 ipv4  10.0.0.2
>>=A0=A0i have this message:
>>=A0=A0RTNETLINK answers: Operation not permitted
>>=A0=A0when i type
>>=A0=A0#mpls ilm add label gen 10000 labelspace 0
>>=A0=A0i have this message
>>=A0=A0RTNETLINK answers: Cannot allocate memory=20
>>=A0=A0
>>=A0=A0what is the problem
>>=A0=A0thanks..
>>

> --
> Marco Schmidt
> mailto:mar...@s2...

Re: [mpls-linux-general] mpls-linux

From: rachid z. <rza...@gm...> - 2007-09-04 11:27:45

Hi
i work mpls with the 1.955 version
when i type :
ip route add 11.0.0.0/8 via 10.0.0.1 mpls 0x2
i have this msg :  Invalid argument
when i type "ip route add 11.0.0.0/8 via 10.0.0.1 mpls" i have incomplete
command so the problem is in 0x2 but i have already create this key by  the
known command

thanks for help

Re: [mpls-linux-general] mpls-linux

From: Marco S. <mar...@s2...> - 2007-09-04 12:54:10

Hello,

this is a known bug of this release. There exists a new one for
testing purposes, if you want to use it, I'll send the link to you. I
don't know if I may post it on the list.

Marco

> Hi
>  i work mpls with the 1.955 version
>  when i type :
>  ip route add 11.0.0.0/8 via 10.0.0.1 mpls 0x2=20
>  i have this msg :=A0 Invalid argument
>  when i type "ip route add 11.0.0.0/8 via 10.0.0.1 mpls" i have
> incomplete command so the problem is in 0x2 but i have already
> create this key by=A0 the known command
>  =20
>  thanks for help