The only manual for the 'mpls' command is the 'help' output (mpls help)
I would gladly accept documentation (even partial) submissions.
On Fri, Mar 10, 2006 at 07:41:42PM +0200, Irina Dumitrascu wrote:
> Hi,
> I've tried your advice and i've removed the commands with "xc add",and the
> TTTL is how i expected.
> Some of mpls's options i understood,but not all of them. Do you have a
> manual page for mpls(even if it's not complete)?
>=20
> Does your implementation of mpls-linux permit the change of the EXP bits =
of
> the MPLS header,and if yes,how could i do that?
> Also, does a MPLS-LSR interpret these bits as a priority and does it know
> how to forward packets depending on the priority?
You can set the EXP bits via the set-exp instruction. You can map EXP
bits to the tcindex (via the exp2tc instruction) which can be used by
the linux traffic scheduling system (tcindex classifier).
If you really want to give that I try I suggest you read the LARTC howto fr=
om
http://lartc.org/ and get it working with IP traffic before trying it
with MPLS.
> Thank you very much.
--=20
James R. Leu
jl...@mi...
|
