Thread: [mpls-linux-general] (no subject) (Page 3)

SourceForge Headquarters 225 Broadway Suite 1600 San Diego, CA 92101 +1 (858) 422-6466

Does the MPLS implementation support RTP and RTCP protocols for video =
streaming?=20
regards
I'm not sure what you mean.

RTP and RTCP are just protocols with run on top of IP.  All IP traffic can
run on top of MPLS.  So I guess the answer to your question is yes.

On Fri, Apr 02, 2004 at 07:28:14PM +0300, Muhammad R. Sami wrote:
> Does the MPLS implementation support RTP and RTCP protocols for video streaming? 
> regards
-- 
James R. Leu
jl...@mi...

so this means that I can stream video over MPLS network assuming that =
RTP will take care of the realtime issues of such traffic.=20
  ----- Original Message -----=20
  From: James R. Leu=20
  To: Muhammad R. Sami=20
  Cc: mpl...@li...=20
  Sent: Friday, April 02, 2004 7:51 PM
  Subject: Re: [mpls-linux-general] (no subject)

  I'm not sure what you mean.

  RTP and RTCP are just protocols with run on top of IP.  All IP traffic =
can
  run on top of MPLS.  So I guess the answer to your question is yes.

  On Fri, Apr 02, 2004 at 07:28:14PM +0300, Muhammad R. Sami wrote:
  > Does the MPLS implementation support RTP and RTCP protocols for =
video streaming?=20
  > regards
  --=20
  James R. Leu
  jl...@mi...

  -------------------------------------------------------
  This SF.Net email is sponsored by: IBM Linux Tutorials
  Free Linux tutorial presented by Daniel Robbins, President and CEO of
  GenToo technologies. Learn everything from fundamentals to system
  =
administration.http://ads.osdn.com/?ad_id=3D1470&alloc_id=3D3638&op=3Dcli=
ck
  _______________________________________________
  mpls-linux-general mailing list
  mpl...@li...
  https://lists.sourceforge.net/lists/listinfo/mpls-linux-general

I see no reason why you couldn't.

On Fri, Apr 02, 2004 at 08:09:48PM +0300, Muhammad R. Sami wrote:
> so this means that I can stream video over MPLS network assuming that RTP will take care of the realtime issues of such traffic. 
>   ----- Original Message ----- 
>   From: James R. Leu 
>   To: Muhammad R. Sami 
>   Cc: mpl...@li... 
>   Sent: Friday, April 02, 2004 7:51 PM
>   Subject: Re: [mpls-linux-general] (no subject)
> 
> 
>   I'm not sure what you mean.
> 
>   RTP and RTCP are just protocols with run on top of IP.  All IP traffic can
>   run on top of MPLS.  So I guess the answer to your question is yes.
> 
>   On Fri, Apr 02, 2004 at 07:28:14PM +0300, Muhammad R. Sami wrote:
>   > Does the MPLS implementation support RTP and RTCP protocols for video streaming? 
>   > regards
>   -- 
>   James R. Leu
>   jl...@mi...
> 
> 
>   -------------------------------------------------------
>   This SF.Net email is sponsored by: IBM Linux Tutorials
>   Free Linux tutorial presented by Daniel Robbins, President and CEO of
>   GenToo technologies. Learn everything from fundamentals to system
>   administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
>   _______________________________________________
>   mpls-linux-general mailing list
>   mpl...@li...
>   https://lists.sourceforge.net/lists/listinfo/mpls-linux-general

-- 
James R. Leu
jl...@mi...

thank you very much....another question is that is it necessary to use =
the TTL bits within the MPLS header...I would  like to utilize those 8 =
bits in encoding some other information.
regards
  ----- Original Message -----=20
  From: James R. Leu=20
  To: Muhammad R. Sami=20
  Cc: mpl...@li...=20
  Sent: Friday, April 02, 2004 8:35 PM
  Subject: Re: [mpls-linux-general] (no subject)

  I see no reason why you couldn't.

  On Fri, Apr 02, 2004 at 08:09:48PM +0300, Muhammad R. Sami wrote:
  > so this means that I can stream video over MPLS network assuming =
that RTP will take care of the realtime issues of such traffic.=20
  >   ----- Original Message -----=20
  >   From: James R. Leu=20
  >   To: Muhammad R. Sami=20
  >   Cc: mpl...@li...=20
  >   Sent: Friday, April 02, 2004 7:51 PM
  >   Subject: Re: [mpls-linux-general] (no subject)
  >=20
  >=20
  >   I'm not sure what you mean.
  >=20
  >   RTP and RTCP are just protocols with run on top of IP.  All IP =
traffic can
  >   run on top of MPLS.  So I guess the answer to your question is =
yes.
  >=20
  >   On Fri, Apr 02, 2004 at 07:28:14PM +0300, Muhammad R. Sami wrote:
  >   > Does the MPLS implementation support RTP and RTCP protocols for =
video streaming?=20
  >   > regards
  >   --=20
  >   James R. Leu
  >   jl...@mi...
  >=20
  >=20
  >   -------------------------------------------------------
  >   This SF.Net email is sponsored by: IBM Linux Tutorials
  >   Free Linux tutorial presented by Daniel Robbins, President and CEO =
of
  >   GenToo technologies. Learn everything from fundamentals to system
  >   =
administration.http://ads.osdn.com/?ad_id=3D1470&alloc_id=3D3638&op=3Dcli=
ck
  >   _______________________________________________
  >   mpls-linux-general mailing list
  >   mpl...@li...
  >   https://lists.sourceforge.net/lists/listinfo/mpls-linux-general

  --=20
  James R. Leu
  jl...@mi...

Hi guys
I have been having some trouble with setting up mpls.pinging between 2 
computers on whichmpls has been set up works.But when i try to ssh between 
the computersA and B ,it hangs for a while and then the  message 
connection closed  by computer B(or A).
Anyone got any solutions to get ssh and other tcp applications working

-- 
A child when asked to name the seven wonder of the world said:
"To touch, to taste, to see, to hear, to run, to laugh and to love."

Hi 
 I,m working on MPLS for linux and use Quagga-0.96.4.
I need a document about MPLS configuration on router.
please help me.
Best regards.

Hi all.
I'm working on MPLS for linux project and use quagga-0.96.4 modefied by 
ldp-portable-0.800 .
How do i comminucate between two computer?
please help me .
regards.

Hi, 
I`m going to graduate in engineering at Federico II of Naples. I`m =
working on a project for my graduation thesis 
concerning mpls-linux. I`=
d like to know if within the last version of mpls-linux (1.946) there is =
a routine which 
allows an association among a FEC and several NHLFE acc=
es keys, when several route meet the request for QoS 
concerning a FEC s=
pecification. I have already looked at the mailing list, but it doesn't s=
eem to me to have found 
information concerning such problem. I wold be =
very pleased to be in contact with the person who is working with 
that,=
 whether this funtionally isn`t already active, but in the course of the =
realization. 

Thank you a lot. 
 =0A=0A=0A=0A_______________________=
_____________________________________=0ANavighi a 4 MEGA e i primi 3 mesi=
 sono GRATIS. =0AScegli Libero Adsl Flat senza limiti su http://www.liber=
o.it=0A

i need some information about the RPM's that need to
be downloaded for MPLS in lunux

__________________________________________________________ 
Enjoy this Diwali with Y! India Click here http://in.promos.yahoo.com/fabmall/index.html

Sorry

/etc/iproute2 # patch -p1 < /usr/src/mpls-linux/patches/iproute2.diff

can't find file to patch at input line 4
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
--------------------------
|diff -uNr iproute2/include/linux/rtnetlink.h iproute2-mpls-1.1
/include/linux/rtnetlink.h
|--- iproute2/include/linux/rtnetlink.h 2004-12-22 16:11:55.000000000 -0600
|+++ iproute2-mpls-1.1/include/linux/rtnetlink.h        2004-12-22 23:31:
16.000000000 -0600
--------------------------
File to patch:

How to instal new version of iproute2 ?

Sorry

I instaled and recomplier Kernel succesfuly with Suse9.3 but the command
MPLS doesn't found !
What's FC2 ?
need I any file ?
how to install precompiled binaries for FC2 ?

Thanks

---------- Forwarded message ----------
From: Rodzina Adamsow <rod...@ga...>
Date: 24 nov. 2005 15:39
Subject: Re: [mpls-linux-general] (no subject)
To: mhamed lasram <mha...@gm...>

Why do U want to recompile iproute2 ?

After U installed new recopiled kernel with MPLS then U should
just install precompiled binaries for FC2 (it is compatible
with MDK,and RH).
U do not have to recompile iproute/iptables if U have anything
compatibile with FC, RH or MDK.

R.

On Thu, 2005-11-24 at 10:17 +0100, mhamed lasram wrote:
>
> Sorry
>
>
> /etc/iproute2 # patch -p1 < /usr/src/mpls-linux/patches/iproute2.diff
>
> can't find file to patch at input line 4
> Perhaps you used the wrong -p or --strip option?
> The text leading up to this was:
> --------------------------
> |diff -uNr iproute2/include/linux/rtnetlink.h
> iproute2-mpls-1.1/include/linux/rtnetlink.h
> |--- iproute2/include/linux/rtnetlink.h 2004-12-22 16:11:55.000000000
> -0600
> |+++ iproute2-mpls-1.1/include/linux/rtnetlink.h        2004-12-22
> 23:31:16.000000000 -0600
> --------------------------
> File to patch:
>
>
>
> How to instal new version of iproute2 ?

Hello,

In addition to a mpls enabled kernel you need the userland application
iproute which provides you the mpls command.
You need to download and install the mpls patched version of iproute. You
can do this by:
* Downloading the official iproute source tarball, patching it with mpls
support and building
* Downloading the already patched version of iproute and building
* Downloading the iproute rpm binary

I personally use Debian, and I'm able to successfully install the iproute
rpm package with alien.

FC2 stands for Fedora Core 2.

Joan.

  _____  

From: mpl...@li...
[mailto:mpl...@li...] On Behalf Of mhamed
lasram
Sent: viernes, 25 de noviembre de 2005 15:39
To: mpl...@li...
Subject: [mpls-linux-general] (no subject)

Sorry

I instaled and recomplier Kernel succesfuly with Suse9.3 but the command
MPLS doesn't found !
What's FC2 ?
need I any file ?
how to install precompiled binaries for FC2 ?

Thanks

---------- Forwarded message ----------
From: Rodzina Adamsow <rod...@ga...>
Date: 24 nov. 2005 15:39 
Subject: Re: [mpls-linux-general] (no subject)
To: mhamed lasram <mha...@gm...>

Why do U want to recompile iproute2 ?

After U installed new recopiled kernel with MPLS then U should 
just install precompiled binaries for FC2 (it is compatible
with MDK,and RH).
U do not have to recompile iproute/iptables if U have anything
compatibile with FC, RH or MDK.

R.

On Thu, 2005-11-24 at 10:17 +0100, mhamed lasram wrote: 
>
> Sorry
>
>
> /etc/iproute2 # patch -p1 < /usr/src/mpls-linux/patches/iproute2.diff
>
> can't find file to patch at input line 4
> Perhaps you used the wrong -p or --strip option? 
> The text leading up to this was:
> --------------------------
> |diff -uNr iproute2/include/linux/rtnetlink.h
> iproute2-mpls-1.1/include/linux/rtnetlink.h
> |--- iproute2/include/linux/rtnetlink.h 2004-12-22 16:11: 55.000000000
> -0600
> |+++ iproute2-mpls-1.1/include/linux/rtnetlink.h        2004-12-22
> 23:31:16.000000000 -0600
> --------------------------
> File to patch:
>
>
>
> How to instal new version of iproute2 ? 

I m Sorry

I m novice ; can you give me more details to use MPLS with Linux.

all files and the links and whre  can i  found it ?
can i use Suse or Mandrake Or redhat or fedora ?
i have Mpls-linux from Sourceforge
and i have linux-Kernel2.6.9.

thanks for more d=E9tails...

Thanks

2005/11/25, Joan Ruiz <jr...@sa...>:
>
>  Hello,
>
> In addition to a mpls enabled kernel you need the userland application
> iproute which provides you the mpls command.
> You need to download and install the mpls patched version of iproute. You
> can do this by:
> * Downloading the official iproute source tarball, patching it with mpls
> support and building
> * Downloading the already patched version of iproute and building
> * Downloading the iproute rpm binary
>
> I personally use Debian, and I'm able to successfully install the iproute
> rpm package with alien.
>
> FC2 stands for Fedora Core 2.
>
> Joan.
>
>  ------------------------------
> *From:* mpl...@li... [mailto:
> mpl...@li...] *On Behalf Of *mhamed
> lasram
> *Sent:* viernes, 25 de noviembre de 2005 15:39
> *To:* mpl...@li...
> *Subject:* [mpls-linux-general] (no subject)
>
> Sorry
>
> I instaled and recomplier Kernel succesfuly with Suse9.3 but the command
> MPLS doesn't found !
> What's FC2 ?
> need I any file ?
> how to install precompiled binaries for FC2 ?
>
> Thanks
>
>
>
> ---------- Forwarded message ----------
> From: Rodzina Adamsow <rod...@ga...>
> Date: 24 nov. 2005 15:39
> Subject: Re: [mpls-linux-general] (no subject)
> To: mhamed lasram <mha...@gm...>
>
> Why do U want to recompile iproute2 ?
>
> After U installed new recopiled kernel with MPLS then U should
> just install precompiled binaries for FC2 (it is compatible
> with MDK,and RH).
> U do not have to recompile iproute/iptables if U have anything
> compatibile with FC, RH or MDK.
>
> R.
>
>
> On Thu, 2005-11-24 at 10:17 +0100, mhamed lasram wrote:
> >
> > Sorry
> >
> >
> > /etc/iproute2 # patch -p1 < /usr/src/mpls-linux/patches/iproute2.diff
> >
> > can't find file to patch at input line 4
> > Perhaps you used the wrong -p or --strip option?
> > The text leading up to this was:
> > --------------------------
> > |diff -uNr iproute2/include/linux/rtnetlink.h
> > iproute2-mpls-1.1/include/linux/rtnetlink.h
> > |--- iproute2/include/linux/rtnetlink.h 2004-12-22 16:11: 55.000000000
> > -0600
> > |+++ iproute2-mpls-1.1/include/linux/rtnetlink.h        2004-12-22
> > 23:31:16.000000000 -0600
> > --------------------------
> > File to patch:
> >
> >
> >
> > How to instal new version of iproute2 ?
>
>
>
>

hi all..
  i'm not able to find mpls-linux patch for kernel 2.4.20-8
  help me if someone knows abt it..
  thanks in advance

Send instant messages to your online friends http://in.messenger.yahoo.com 
MPLS linux no longer supports the 2.4.x kernel tree.  Please switch
to a 2.6.9 kernel and use 1.946 or wait until the pending release of
mpls-linux 1.950 with will support the 2.6.15-rc5 kernel.

On Sun, Dec 18, 2005 at 11:38:30AM +0000, ashish verma wrote:
> hi all..
>   i'm not able to find mpls-linux patch for kernel 2.4.20-8
>   help me if someone knows abt it..
>   thanks in advance
>=20
> Send instant messages to your online friends http://in.messenger.yahoo.co=
m=20
--=20
James R. Leu
jl...@mi...

I have done what you said:
1. Install Fedora Core 3 on all pc"s
> >>   2. download the kernel 2.6.9 from
> >>      www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.9.tar.bz2
> >>         1. move dowloaded file to /usr/src/
> >>   3. download mpls files and move them to /usr/src/ directory:
> >>         1. iproute-2.6.9-3mpls1_946.i386.rpm
> >>         2. mpls-linux-1.946a.tar.bz2
> >>   4. in /usr/src/ do this:
> >>         1. tar xfvj linux-2.6.9.tar.bz2
> >>         2. tar xfvj mpls-linux-1.946a.tar.bz2
> >>   5. next:
> >>         1. cd linux-2.6.9
> >>         2. pathc ?p1 < ../mpls-linux/patches/linux-kernel.diff
> >>   6. after you pathced the kernel with mpls, you have to configure it
> >>         1. www.digitalhermit.com/linux/Kernel-Build-HOWTO.html
> >>            
<http://www.digitalhermit.com/linux/Kernel-Build-HOWTO.html>
> >>         2. + Device Drivers
> >>            |
> >>            +-> + Networking Support
> >>            |
> >>            +-> + Networking Support
> >>            |
> >>            +-> + Networking Options
> >>            |
> >>            +-> [y] Multiprotocol Label Switching
> >>            |
> >>            +-> + TCP/IP networking
> >>            |
> >>            +-> [y] IP: MPLS support
> >>            |
> >>            +-> + Networking packet filtering (replaces ipchains)
> >>            |
> >>            +-> + IP: Netfilter Configuration
> >>            |
> >>            +-> [y] IP tables support (required for filtering/masq/NAT)
> >>            |
> >>            +-> [y] spec_nh target support
> >>
> >>            [root@panos linux-2.6.9]# make
> >>            [root@panos linux-2.6.9]# make modules_install
> >>            [root@panos linux-2.6.9]# make install
> >>         3. and do reboot
> >>   7. after these steps there is one thing to do:
> >>         1. in /usr/src/ directory do this (if is needed file here)
> >>         2. rpm ?Uvh iproute-2.6.9-3mpls1_946.i386.rpm

but when I run "mpls nhlfe add key 0" I got error

 RTNETLINK answers: Invalid argument

 and "mpls nhlfe show" got strange error

 NHLFE entry key 0x00000000 mtu 1702127664 
          (0 bytes, 0 pkts, 0 dropped)
 NHLFE entry key 0x00000000 mtu 1819213824 
          (0 bytes, 0 pkts, 0 dropped)
 NHLFE entry key 0x00000000 mtu 1685417325 propagate_ttl 
          (0 bytes, 0 pkts, 0 dropped)
 NHLFE entry key 0x00000000 mtu 1953853036 propagate_ttl 
          (0 bytes, 0 pkts, 0 dropped)
 NHLFE entry key 0x00000000 mtu 1735550256 
          (0 bytes, 0 pkts, 0 dropped)
 NHLFE entry key 0x00000000 mtu 1936290864 
          (0 bytes, 0 pkts, 0 dropped)

 "mpls labelspace add dev eth0 labelspace 0" got error

 RTNETLINK answers: Cannot assign requested address

 But other tools like iptables, ip work well.
 .
 Could you help me  ?
 thank you!!!!

davis chen

Why not use the FC3 kernel RPM I provide instead of compiling
your own kernel?

On Tue, Jan 31, 2006 at 08:24:20AM +0000, rong chen wrote:
> I have done what you said:
> 1. Install Fedora Core 3 on all pc"s
> >>>   2. download the kernel 2.6.9 from
> >>>      www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.9.tar.bz2
> >>>         1. move dowloaded file to /usr/src/
> >>>   3. download mpls files and move them to /usr/src/ directory:
> >>>         1. iproute-2.6.9-3mpls1_946.i386.rpm
> >>>         2. mpls-linux-1.946a.tar.bz2
> >>>   4. in /usr/src/ do this:
> >>>         1. tar xfvj linux-2.6.9.tar.bz2
> >>>         2. tar xfvj mpls-linux-1.946a.tar.bz2
> >>>   5. next:
> >>>         1. cd linux-2.6.9
> >>>         2. pathc ?p1 < ../mpls-linux/patches/linux-kernel.diff
> >>>   6. after you pathced the kernel with mpls, you have to configure it
> >>>         1. www.digitalhermit.com/linux/Kernel-Build-HOWTO.html
> >>>           =20
> <http://www.digitalhermit.com/linux/Kernel-Build-HOWTO.html>
> >>>         2. + Device Drivers
> >>>            |
> >>>            +-> + Networking Support
> >>>            |
> >>>            +-> + Networking Support
> >>>            |
> >>>            +-> + Networking Options
> >>>            |
> >>>            +-> [y] Multiprotocol Label Switching
> >>>            |
> >>>            +-> + TCP/IP networking
> >>>            |
> >>>            +-> [y] IP: MPLS support
> >>>            |
> >>>            +-> + Networking packet filtering (replaces ipchains)
> >>>            |
> >>>            +-> + IP: Netfilter Configuration
> >>>            |
> >>>            +-> [y] IP tables support (required for filtering/masq/NAT)
> >>>            |
> >>>            +-> [y] spec_nh target support
> >>>
> >>>            [root@panos linux-2.6.9]# make
> >>>            [root@panos linux-2.6.9]# make modules_install
> >>>            [root@panos linux-2.6.9]# make install
> >>>         3. and do reboot
> >>>   7. after these steps there is one thing to do:
> >>>         1. in /usr/src/ directory do this (if is needed file here)
> >>>         2. rpm ?Uvh iproute-2.6.9-3mpls1_946.i386.rpm
>=20
> but when I run "mpls nhlfe add key 0" I got error
>=20
> RTNETLINK answers: Invalid argument
> =20
> and "mpls nhlfe show" got strange error
>=20
> NHLFE entry key 0x00000000 mtu 1702127664=20
>          (0 bytes, 0 pkts, 0 dropped)
> NHLFE entry key 0x00000000 mtu 1819213824=20
>          (0 bytes, 0 pkts, 0 dropped)
> NHLFE entry key 0x00000000 mtu 1685417325 propagate_ttl=20
>          (0 bytes, 0 pkts, 0 dropped)
> NHLFE entry key 0x00000000 mtu 1953853036 propagate_ttl=20
>          (0 bytes, 0 pkts, 0 dropped)
> NHLFE entry key 0x00000000 mtu 1735550256=20
>          (0 bytes, 0 pkts, 0 dropped)
> NHLFE entry key 0x00000000 mtu 1936290864=20
>          (0 bytes, 0 pkts, 0 dropped)
>=20
>=20
> "mpls labelspace add dev eth0 labelspace 0" got error
>=20
> RTNETLINK answers: Cannot assign requested address
>=20
>=20
> But other tools like iptables, ip work well.
> .
> Could you help me  ?
> thank you!!!!
>=20
> davis chen
>=20
>=20
>=20
>=20
> -------------------------------------------------------
> This SF.net email is sponsored by: Splunk Inc. Do you grep through log fi=
les
> for problems?  Stop!  Download the new AJAX search engine that makes
> searching your log files as easy as surfing the  web.  DOWNLOAD SPLUNK!
> http://sel.as-us.falkag.net/sel?cmd=3Dlnk&kid=3D103432&bid=3D230486&dat=
=3D121642
> _______________________________________________
> mpls-linux-general mailing list
> mpl...@li...
> https://lists.sourceforge.net/lists/listinfo/mpls-linux-general

--=20
James R. Leu
jl...@mi...

=20
Hii=20
          I have installed MPLS in 2 systems having fedora core2. Can I =
set up LSP between 2 systems? If the first system say, A is LER then the =
second one must be LSR or the A itself can be LER (Egress). How the =
label swapping takes place here...Pls clarify this
=20
Regards,
Kishor
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LIVE FROM THE STREET!

Sym: (P R T H)
Price: .088

Announces the Opening of Two New Stores by
(P.I.NKSH.E.ETS: P R T H) is pleased to announce that Puerto Rico 7, Inc. has
opened two new stores. The stores are recorded as Pinero II and Borinquen
Towers. Both locations were researched demographically to deliver above
average sales due to high traffic streets and communities directly
surrounding the stores. The Management team believes that the stores will
each quickly reach an annualized run rate of 1.2 Million dollars of sales.

IMAGINE IF YOU HAD THE CHANCE TO BUY A WAL-MART FRANCHISE IN MEXICO
RIGHT WHEN IT FIRST OPENED ITS DOORS THERE  AND ALL YOU NEEDED WAS A
SMALL STAKE TO GET IN.

Hurry, we see this stock starting to make the turn NOW.

LIVE FROM THE STREET!

Sym: (P R T H)
Price: .088

Announces the Opening of Two New Stores by
(P.I.NKSH.E.ETS: P R T H) is pleased to announce that Puerto Rico 7, Inc. has
opened two new stores. The stores are recorded as Pinero II and Borinquen
Towers. Both locations were researched demographically to deliver above
average sales due to high traffic streets and communities directly
surrounding the stores. The Management team believes that the stores will
each quickly reach an annualized run rate of 1.2 Million dollars of sales.

IMAGINE IF YOU HAD THE CHANCE TO BUY A WAL-MART FRANCHISE IN MEXICO
RIGHT WHEN IT FIRST OPENED ITS DOORS THERE  AND ALL YOU NEEDED WAS A
SMALL STAKE TO GET IN.

Hurry, we see this stock starting to make the turn NOW.

B,U,L,L MARKET R_E_PORT!!!
Insider B_u_ying A-l-e-r-t!!!

Tr Date: Friday, Aug 10, 2007
Com: P-R-I_M_E T.I.M.E GROUP INC
Symbol: (P)(R)(T)(H)
Cur Pr: $0.105
Thur Close: Gain (19.32%)
Recomm: S!trong B.u.y/H.o.l.d

DO YOU LOVE T_R-A-D-I-N_G P*ENNY S,T.O,C.K,S?
[P][R][T][H] WILL MOVE LIKE A COMET AND ITS
ONLY GOING TO GET BETTER!
Wat ch this S-U.P-E.RNOVA closely FRIDAY!