You only need to set a label space on an interface which is receiving
labeled packets. Read RFC3032 for more info.
On Tue, Dec 07, 2004 at 01:01:01PM +0100, ed...@ti... wrote:
> Hi
> making a test between an MPLS router and an IP one i've forgotten to do
> following instruction:
>
> mplsadm2 -L eth0:0
>
> Seeing the output of test MPLS router labels correctly all packets it sents
> to the IP router. Now my question is this: what the command above is useful
> for? Why it seems that it goes well also without this setting?
> Making other tests i've noticed that without this setting there is no output
> on video but communication goes well however and all packets are correctly
> labeled
> Thanks in advance for the help
>
> __________________________________________________________________
> Tiscali Adsl 2 Mega Free: l'adsl piu' veloce e' gratis!
> Naviga libero dai costi fissi con Tiscali Adsl 2 Mega Free, l'adsl Free
> piu' veloce in Italia. In piu', se ti abboni entro il 13 dicembre 2004,
> navighi gratis fino al 31 marzo 2005 e non paghi il costo di adesione.
> http://abbonati.tiscali.it/adsl/
>
>
>
>
>
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.
> http://productguide.itmanagersjournal.com/
> _______________________________________________
> mpls-linux-general mailing list
> mpl...@li...
> https://lists.sourceforge.net/lists/listinfo/mpls-linux-general
--
James R. Leu
jl...@mi...
|
