Hi everybody
I'm new using mplsadm and i've many problems with it
Like i've told you in my precedent mails i've tryed to make a lsp from a
pc (10.0.3.100) to another (10.0.3.17)
I've done
mplsadm -A -O 0
mplsadm -O key1 -o push:gen:16:set:eth0:ipv4:192.168.8.197
mplsadm -A -I gen:17:0
mplsadm -L eth0:0
and after i ping 10.0.3.17 from my pc
Like i've told i saw packets going from my pc to the others but i didn't
see MPLS headers.
I've read mails about this problem on this mailing list and i've seen tha=
t
my problem is common to many people but how can i resolve it?
I've another problem:reading mails i've seen that to see thematching betw=
een
labels and device i've to do following commands:
[root@localhost root]# cat /proc/net/mpls*
01010702
[root@localhost root]# ip route show
i've done it and the result is :
[root@localhost root]# cat /proc/net/mpls*
01010702
[root@localhost root]# ip route show
10.0.3.57 via 10.0.3.100 dev eth0 scope link
10.0.3.57 via 10.0.3.100 dev eth0
10.0.3.17 via 10.0.3.100 dev eth0 scope link
!!!Deficit 4, rta_len=3D10
10.0.3.0/24 dev eth0 proto kernel scope link
127.0.0.0/8 dev lo scope link
default via 10.0.3.1 dev eth0
what does it mean?
What does "scope link " mean?
I've tryed to do ip show but it gaves me error
How can i do?
Ive seen mpls_in and mpls_out files but they are empty
What's happened?
Ive tryed to make mplsadm -d but it doesn't give me indication (it writes=
me Successful)
What i've to do to make lsp,see the matching that mpls makes between devi=
ce
and labels?
How does dmesg work?
What i've to see in dmesg?
Please answerm me soon, i'm blocked
Thanks in advance
__________________________________________________________________
Tiscali ADSL, fino a 9 MESI GRATIS sull'offerta Tiscali ADSL Light Mega!
Tiscali ADSL non teme confronti! Abbonati subito.
http://point.tiscali.it/adsl/index.shtml
|
