Hi everybody
before doing what i've illustrated in the precedent mail i've tryed to
send MPLS packets from my pc (IP address 10.0.3.100) to another pc (10.0=
.3.17)
following the instruction that are in the mail "Sorry if i ask again" in
this mailing list (except ip route add 10.0.3.17 via 10.0.3.100 lsp 0x000=
00002)
and, after, pinging the other pc. I've seen with ethereal that my pc send=
s
correctly MPLS packets. I've tryed to make the same tsending to other pcs=
and all works well.
After this i've tryed to do
[root@localhost utils]# mplsadm -A -O 0
> Key: 0x00000007
> Out Segment add: Success
> [root@localhost utils]# mplsadm -O 0x00000007 -o push:gen:16:set:eth0=
:ipv4:10.0.3.17
> Out Instr: Success
> [root@localhost utils]# ip route add 10.0.3.17 via 10.0.3.100 lsp 0x0=
0000007
> Error: either "to" is duplicate, or "lsp" is a garbage. Why does it
work well if there is an error?
What's happened?
Thanks in advance
__________________________________________________________________
Tiscali ADSL, fino a 9 MESI GRATIS sull'offerta Tiscali ADSL Light Mega!
Tiscali ADSL non teme confronti! Abbonati subito.
http://point.tiscali.it/adsl/index.shtml
|
