hi all
i had emailed yeyst regarding the problem i was facing when i give a ip route
add command top add to that i have this when i do a cat /proc/net/mpls_*
[root@localhost net]# cat /proc/net/mpls_*
0x00011001 0/0/0 gen 17 0 1 POP PEEK
0x00022001 0/0/0 gen 34 0 1 POP PEEK
eth0 0 8
0x00000004 0/0/0 1 PUSH(gen 17) SET(eth0,192.168.6.60)
01010702
if i wanna delete the 0x00011001& 0x00022001 keys how do i do this ???
i had used this command
[root@localhost root]#mplsadm -A -B -O gen:2614:eth0:ipv4:192.168.6.60 -f
192.168.6.60/32
root # mplsadm -A -I gen:1234:0
on lsr1
and
root # mplsadm -A -B -O gen:1234:eth0:ipv4:192.168.5.33 -f192.168.5.33/32
root # mplsadm -A -I gen:2614:0
on lsr2
and the error i got was
root@localhost root]#
cat /proc/net/mpls_out
0x00000004 0/0/0 1 PUSH(gen 17) SET(eth0,192.168.6.60)
[root@localhost root]# ip route add 192.168.6.60/32 lsp 0x00000004
Error: either "to" is duplicate, or "lsp" is a garbage.
why is this so ????????
|
